Mid-States Concrete Industries flexicore
|
|
- Ralph Brett Johnson
- 5 years ago
- Views:
Transcription
1 2" STRUCTURAL TOPPING (2 HOUR FIRE RATING) COMPOSITE DESIGN / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place and 2" topping.) 1- Dead Load, 92 psf grouted weight of structural. 5- Loads underlined are controlled by permissible flexural tension at service loads.
2 2" STRUCTURAL TOPPING (3 HOUR FIRE RATING) COMPOSITE DESIGN / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place and 2" topping.) 1- Dead Load, 92 psf grouted weight of structural.
3 2" STRUCTURAL TOPPING (4 HOUR FIRE RATING) COMPOSITE DESIGN / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place and 2" topping.) 1- Dead Load, 92 psf grouted weight of structural.
4 (2 HOUR FIRE RATING) / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place.) 1- Dead Load, 67 psf grouted weight of structural.
5 (3 HOUR FIRE RATING) / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place.) 1- Dead Load, 67 psf grouted weight of structural.
6 (4 HOUR FIRE RATING) / /2, / / (Includes the live load plus dead load that is in addition to the weight of the grouted slabs in place.) 1- Dead Load, 67 psf grouted weight of structural.
December 1, Table of Contents. TABLE TOPIC PAGE General TABLE TOPIC PAGE. Roof Decks (continued) (Diaphragm Shear Values)
Page 1 of 57 Table of Contents Report ER-78P December 1, 02 TABLE TOPIC PAGE General 1 Allowable Shear Values - Spot or Seam Welds 2 2 Allowable Tension Loads - Hilti Fasteners... 2 3 Allowable Shear and
More informationDESIGN CHART # 1: Lamit Basic S.I.P Properties
DESIGN CHART # 1: Lamit Basic S.I.P Properties LAMIT S.I.P. PROPERTIES - WEAK AXIS ORIENTED PARALLEL TO SPAN Panel Weight Core Facing Moment Section Elastic Shear Shear Radius Allowable Allowable Allowable
More informationPost-Tensioned Concrete U-Girder Design. Midas Elite Speaker Series. Doug Midkiff, PE AECOM
Post-Tensioned Concrete U-Girder Midas Elite Speaker Series Doug Midkiff, PE AECOM POST-TENSIONED CONCRETE U-GIRDER BRIDGE DESIGN (I-49 LAFAYETTE CONNECTOR) Doug Midkiff Structural Engineer III AECOM E
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS CANADA
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS CANADA ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the aesthetic
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the aesthetic appeal
More informationMaximum Span Tables. for Joists and Rafters. MSR Lumber. for Performance. Figure provided courtesy of the American Forest & Paper Association
Maximum Span Tables for Joists and Rafters MSR Lumber for Performance Figure provided courtesy of the American Forest & Paper Association 2 MSRLumber Producers Council Span Tables Purpose and Introduction
More informationCOMPOSITE FLOOR SYSTEM
COMPOSITE FLOOR SYSTEM US Technical and Structural Information A VERSATILE, HIGH-STRENGTH, LONG-SPAN FLOORING SOLUTION COMPOSITE FLOORING SYSTEM Proven, reliable, and cost-effective THINFLOR COMPOSITE
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS UNITED STATES
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS UNITED STATES ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the
More informationMunich Fire Tests on Membrane Action
Munich Fire Tests on Membrane Action Dipl.-Ing. (FH) Martin Stadler Prof. Dr.-Ing. Dipl. Wirt.-Ing. (NDS) Martin Mensinger Technische Universität München Martin Stadler 1 Research Project Utilisation of
More informationRequirements for Use of Allowable Load Tables
Southern Pine Allowable Load Tables Requirements for Use of Allowable Load Tables 1. These tables are for gravity loads only. Consult a registered design professional for wind and seismic load analysis
More informationA B C D E F 113' - 2" 22' - 6" 22' - 6" 22' - 6" 22' - 6" 23' - 2" A A A3.11 A3.
.09 DASHED LINE INDICATES ROOF OVERHEAD..0 DASHED LINE INDICATE CANOPY OVERHEAD. ' - " ' - " ' - " ' - " ' - " ' - " A. A.0 9' - " ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" A.0 A.0 UNIT 0 UNIT 0
More informationTRUS JOIST BEAMS, HEADERS, AND COLUMNS
FLOOR SOLUTIONS ROOF SOLUTIONS TRUS JOIST BEAMS, HEADERS, AND COLUMNS Featuring TimberStrand LSL, Microllam LVL, and Parallam PSL Uniform and Predictable Minimal Bowing, Twisting, and Shrinking Strong
More informationCOMMERCIAL CONSTRUCTION MANUFACTURERS OF CORRUGATED STEEL DECKING PRODUCTS CELLULAR DECK ROOF DECK FLOOR DECK.
DACSinc. COMMERCIAL CONSTRUCTION MANUFACTURERS OF CORRUGATED STEEL DECKING PRODUCTS CELLULAR DECK ROOF DECK FLOOR DECK www.dacsinc.com DACS Products Earn Factory Mutual Approval DACS, Inc. is pleased to
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: 2100 REXFORD ROAD CHARLOTTE, NORTH CAROLINA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 3 658 (56) 699 053 www.icc es.org ESR 1 Reissued 1/01 This report is subject to renewal 1/0. DIVISION: 05 00 00 METALS SECTION:
More informationBridge Overhang Brackets
Bridge C49, C49D, C49S and C49JR Bridge Dayton Superior offers the bridge contractor four different Horizontal Length versions of the C49 Bridge Bracket, which allows for maximum adjustability to meet
More informationRosboro Manufactured Timber. Preferred lengths Dry stable timber Full-Framing Width
Rosboro Manufactured Timber n n n Preferred lengths Dry stable timber Full-Framing Width TABLE OF CONTENTS Available s 2 Beam, Header and Column Design Values 3 Allowable Uniform Floor Loads 4 Allowable
More informationTIMING BELT TENSIONER FOR AFTERMARKET RENAULT G8T 2.2L DIESEL ENGINE (Revision date: 06/24/1999)
1. Allow the engine and tensioner to stabilize to the same relative ambient temperature before installing a tensioner for proper belt tension adjustment. Do not attempt to install a cool tensioner onto
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: CONSOLIDATED SYSTEMS, INC. (CSi )
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2839 Reissued 05/2015 This report is subject to renewal 05/2016. DIVISION: 05 00 00 METALS SECTION:
More informationLINTELS WITH TG. Single Spans. Lintels Supporting Truncated Girder Truss INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2
63 Single Spans INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2 TG Set Back 3.6m Maximum 40 kg/m 2 90 kg/m 2 Restraint value for slenderness calculations is 600 mm. K6 factor of 1.0 used. K23 factor
More informationRAFTERS. Single and Continuous Spans
7 Single and Continuous Spans Restraint value for slenderness calculations is 1200 mm, in 10, 20, 40( kg/m 2 ) (Restraint may be by Roof Battens) Restraint value for slenderness calculations is 600 mm,
More informationBOISE GLULAM 24F-V4 IJC
Engineered Wood Products 24F-V4 IJC I-Joist Compatible Glulam Guide 3½" x 7½" 3½" x 9½" 3½" x 11⅞" 3½" x 14" 3½" x 16" Sizes Available 5½" x 7½" 5½" x 9½" 5½" x 11⅞" 5½" x 14" 5½" x 16" IJG 01/2010 2 I-Joist
More informationFREE STANDING WORK STATION JIB CRANE
SECTION 14661 FREE STANDING WORK STATION JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationInternal Bracing Design Program Background Information
Internal Bracing Design Program Background Information 2016 by International Masonry Institute All rights reserved. This program is intended as a preliminary design tool for design professionals who are
More informationLRFD Cast-In-Place (CIP) Slab Span Design Example
LRFD Cast-In-Place (CIP) Slab Span Design Example County: Any Hwy: Any Design: BRG Date: 12/2006 CSJ: Any Project: Any Checked: BRG Date: 12/2006 Design Parameters The basic bridge geometry can be found
More informationCatalog VF4. Verco s manufacturing facilities are located in Phoenix, Arizona, and the California cities of Fontana and Antioch.
This catalog covers Verco Decking, Inc. s FORMLOK composite decks and VERCOR non-composite form decks. It also features the innovative PunchLok System for floor deck applications. By significantly speeding
More informationGENERAL INFORMATION FEATURES.
TECHNICAL GUIDE GENERAL INFORMATION SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has one of the highest strength-to-mass ratios of any structural
More informationLoad Distribution In Adjacent Precast "Deck Free" Concrete Box-Girder Bridges
Ryerson University Digital Commons @ Ryerson Theses and dissertations 1-1-2010 Load Distribution In Adjacent Precast "Deck Free" Concrete Box-Girder Bridges Waqar Khan Ryerson University Follow this and
More informationStandard Aluminum Dead Shaft Idler Rolls
A Standard Aluminum Dead Shaft Idler Rolls Lower inertia when compared to a steel idler Ideal for lower web tensions More corrosion resistant than steel Dynamically balanced for high speed operation Readily
More informationCONSTRUCTION PRODUCT CATALOGUE.
CONSTRUCTION PRODUCT CATALOGUE CONTENTS Void Former Anchor Pan Heavy Duty AS1314 Flat Anchor Standard AS1314 Flat Anchor 3 Strand Flat Anchor 15.2 Strand Flat Anchor Wedge Blocks Mono Anchor Wedges Ducting
More informationMultideck 80-V2 Features and Applications
Features and Applications is designed to incorporate all the advantages of the Multideck 60-V2 but in a deeper profile to provide longer spans up to 5.4m unpropped. Concrete Volume Savings Due to its unique
More informationCERTIFICATE OF APPROVAL No CF 574. Sika Deutschland GmbH
CERTIFICATE OF APPROVAL No CF 574 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Kornwestheimer Strasse
More informationFloor Doors. Babcock-Davis Always right there.
Babcock-Davis Babcock-Davis floor, vault, and sidewalk doors provide reliable and safe access below ground and between building floors. With Babcock-Davis, we build our services around your specified needs.
More informationMultideck 50-V2 Features and Applications
Features and Applications is a dovetail profile deck with a depth of 50mm providing spans up to 4m unpropped. Greater Design Efficiency The larger range of Multideck gauge thicknesses available allow much
More informationINSTALLATION INSTRUCTIONS AMBASSADOR DRUM OVERHEAD SERIES 100 DUMBWAITER
INSTALLATION INSTRUCTIONS AMBASSADOR DRUM OVERHEAD SERIES 100 DUMBWAITER The installation of Matot Drum Dumbwaiters should only be performed by qualified, experienced, and trained elevator installers.
More informationFIELD TESTING AND LOAD RATING REPORT: RIDOT#896 NORTH KINGSTOWN, RI
FIELD TESTING AND LOAD RATING REPORT: RIDOT#896 NORTH KINGSTOWN, RI SUBMITTED TO: SUBMITTED BY: AECOM USA, Inc. 10 Orms Street, Suite 405 Providence RI 0290 www.aecom.com BRIDGE DIAGNOSTICS, INC. 1965
More informationTM OUR PRODUCTS INDIA Accurate, reliable and free from any defect, we provide the best quality Electrical Porcelain and Polymer Insulators, Hardware Fittings and protection Switches at an economical price.
More informationPRE-HUNG ENTRY DOOR SYSTEMS
AC101_Achiever_Residential_02.15_Layout 1 2/10/15 10:15 AM Page 1 Pre-Hung Entry Door Systems Commercial Residential Adjustable Steel & Wood Jambs Steel & Fiberglass Doors Rated & Non-Rated PRE-HUNG ENTRY
More informationTable of Contents. PrimeJoist
JamStud Introduction Table of Contents PrimeJoist Introduc on...1 Fire & Sound Tested Assemblies...2 PrimeJoist Design Considera ons...3-4 PrimeJoist Product Profile...5 PrimeJoist Sec on Proper es...6
More informationMANHOLE INDEX INDEX CONCRETE MANHOLE SPECIFICATIONS ASTM SPECIFICATIONS
MANHOLE INDEX INDEX M1...STANDARD STORM MANHOLE ASSEMBLY A1 M2...STANDARD MANHOLE ASSEMBLY A2 M3...CONICAL MANHOLE ASSEMBLY A3 M4...CONICAL MANHOLE ASSEMBLY A4 M5...CONICAL MANHOLE ASSEMBLY A5 M6...CONICAL
More informationAPPENDIX D. D.1 Macalloy Bars. Approximate safe working loads (kn) Appendix D - Proprietary Components (1/9) Stainless steel architectural ties
Appendix D - Proprietary Components (1/9) APPENDIX D D.1 Macalloy Bars Bar dia. mm Stressing ties Stainless steel stressing ties Stainless steel architectural ties High strength Tie rods grades precision
More information477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength
3M 477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength Principal Investigator: Dr. Kamal Amin Reviewed by: Dr. Colin McCullough Date of Report: June 1, 2003
More informationIN-VEHICLE REPAIR. Timing Drive Components Camshaft Drive Cassette, LH. Special Tool(s) Holding Tool, Camshaft Sprocket (T97T-6256)
303-01A-1 IN-VEHICLE REPAIR Timing Drive Components Camshaft Drive Cassette, LH 303-01A-1 Special Tool(s) Holding Tool, Camshaft Sprocket 303-564 (T97T-6256) Adapter for 303-564 303-578 (T97T-6256-A) Holding
More informationCleveland-Kidder. Design Features
LOW PROFILE Performance Benefits Cleveland Motion Controls Slim Cell is part of the Tension Transducer family. a unique new low-profile design, it sets the standard for either new machinery or for retrofits
More informationGM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions
GM 6-Cylinder Cam Tool Set 3.0L and 3.2L Operating Instructions Set Includes: Locking Tool... 536594 Locking Tool... 536595 Crankshaft Holding Tool... 536596 Alignment Gauge... 536608 Belt Installation
More informationThe design superimposed load combination is G SDL + Q and must not be greater than the superimposed loads given in the tables.
Flooring Systems 3.4.5 FLATDECK COMPOSITE SLAB LOAD SPAN TABLES Superimposed loads (G SDL + Q) are presented for slab thicknesses between 110mm and 200mm and over a range of spans between 2.0m and 7.2m
More informationThe Entice System is intended for exterior installations requiring the use of insulating glass.
Edward C. Robison, PE C.R. Laurence Co., Inc. 2503 East Vernon Los Angeles, CA 90058 18 March 2015 SUBJ: ENTICE SYSTEM - INSULATING GLASS ENTRY WALLS The Entice System uses stainless steel clad aluminum
More informationRecommended Installation Procedure (11 DEC 09) ATech Timing Belt Tensioner (979847/901) VW 1.6/2.0L L4 EA189 CR Engine
Initial Preparation: Caution: The procedure to access the timing belt tensioner and all other timing driven components must be done according to VW s guidelines. The mounting of the TBT is done on the
More informationPRECAST SQUARE COLUMN
PRECAST SQUARE COUMN CODE OF COMPONENTS CS 3030-01 Product series 105 ap length to detail ink refer to schedule 1 1 ap length ap schedule Reinforcement ar Size (mm) ap ength (mm) 12 500 16 650 20 800 25
More information2.0E ES LVL U.S. Design Manual
I N T E R N A T I O N A L B E A M S 2.0E ES LVL U.S. Design Manual August 2013 2 INTERNATIONAL BEAMS, INC. Our Company At International Beams, Inc. we take pride in providing our customers with premium
More informationESR-2408 Reissued August 2014 This report is subject to renewal August 2015.
ICC-ES Evaluation Report ESR-2408 Reissued August 2014 This report is subject to renewal August 2015. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationSAFE-T-SPAN LOAD/DEFLECTION INFORMATION
SAFE-T-SPAN LOAD/DEFLECTION INFORMATION Fibergrate Composite Structures Inc. has revised its load/deflection tables to be even more user friendly by separating the uniform load information from the concentrated
More information10. Predesign charts of castellated beams
. Predesign charts of castellated beams rcelorittal has developed predesign charts to enable engineers to quickly determine initial section sizes and web opening layouts based on the loading conditions
More informationDead Shaft Aluminum Idlers
Dead Shaft luminum Idlers Webex Dead Shaft luminum Idlers are some of the most versatile and hardworking idlers on the market today. Weighing nearly half as much as comparable steel rollers, aluminum idlers
More informationThe FRACOF Composite Slab Test
The FRACOF Composite Slab Test Experiment, Predictions & Results Anthony Abu & Ian Burgess Fire Resistance Assessment of partially protected COmposite Floors - FRACOF Introduction To increase the use of
More informationOpportunities and Challenges for the. Friday September 24,
LRFD Facts and Misconceptions: Opportunities and Challenges for the Micropile il Community Friday September 24, 2010 By Jerry A. DiMaggio, PE, M.ASCE Email: jdimaggio2@verizon.net Email: jdimaggio@nas.edu
More informationSTEEL XLERPLATE SIZE SCHEDULES EFFECTIVE JANUARY 2015
XLERPLATE SIZE SCHEDULES EFFECTIVE JANUARY 2015 STEEL General Information WHAT IS A SIZE SCHEDULE? A size schedule is a table showing the XLERPLATE steel sizes available from BlueScope in a given grade
More informationSTRUCTURAL EDGE ENGINEERING, PLLC
STRUCTURAL EDGE ENGINEERING, PLLC STRUCTURAL CALCULATIONS HINES BLD 3 BOISE, ID SE PROJECT NO: SE16-181 PREPARED FOR: CODE: DATE: NEUDESIGN ARCHITECTURE & LAWSON DESIGN INC 2012 IBC APRIL 23, 2017 683
More informationLM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
More informationAASHTOWare Bridge Design and Rating Training. Capacity Override at Points of Interest (BrDR 6.5) Capacity Override LRFR
AASHTOWare Bridge Design and Rating Training Capacity Override at Points of Interest (BrDR 6.5) Topics Covered Capacity Override LRFR Capacity Override LRFD Capacity Override LRFR Open BID1 in BrR and
More informationTEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES
INFORMATION BULLETIN / PUBLIC - ELECTRICAL CODE REFERENCE NO.: LAMC 93.0230 Effective: 3-24-69 DOCUMENT NO. P/EC 2002-006 Revised: 11-17-00 Previously Issued As: RGA #7-69 TEMPORARY ELECTRIC WIRING FOR
More informationZoom and Print Options
Vehicle» Engine, Cooling and Exhaust» Engine» Timing Components» Timing Chain» Service and Repair» Procedures» Timing Chain and Sprockets Replacement Timing Chain and Sprockets Replacement Tools Required
More informationMultideck 60-V2. Contents
The original and still the most popular deck in the market is a 60mm high, structurally efficient trapezoidal profile providing an excellent composite union between steel and concrete to maximise the load
More informationCircular Motion. Save My Exams! The Home of Revision GCSE(9-1) Level. Edexcel Topic. Exam Board. Circular Motion Sub-Topic Booklet Mark Scheme 1
Circular Motion Mark Scheme Level GCSE(9-) Subject Physics Exam Board Edexcel Topic Circular Motion Sub-Topic Booklet Mark Scheme Time Allowed: 62 minutes Score: /62 Percentage: /00 Page M.(a) A (b) (i)
More information2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) Supreme Framing System Product Catalog
12 0 2 / 2009IANT C B I PL COM 2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) R Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What
More informationLive Bottom Trailers and Truck Bodies
A-755-17 Live Bottom Trailers and Truck Bodies This book illustrates both optional and standard equipment available on Falcon Trailers. E. D. Etnyre & Co., whose policy is one of continuous improvement,
More informationFSG-801. Fabricated Steel FEMA 361 Grille Chevron Blade. Application and Design. Standard Construction
FEMA 361 Grille Chevron Blade Application and Design is a severe duty fabricated steel grille designed to protect exterior wall penetrations on FEMA 320 or 361 compliant storm shelters or safe rooms. Most
More informationDeltaStud - Lightweight Steel Framing
DeltaStud - Lightweight Steel Framing B C H A t P Load Tables for Wind Bearing and Combined Wind & Axial Load Bearing Condition January 2014 Table of Contents Commentary Introduction...3 Product Identification...3
More informationTechnical Data MM Channel
Technical Data MM Channel The enclosed pages are taken from the Installation Systems Catalogue 2015 for additional information please visit the technical library at www.hilti.co.uk or call our Technical
More informationPORCELAIN INSULATORS
Solid Core Station Post Insulator PORCELAIN INSULATORS It is an insulator of generally columnar shape, and it consists of one post insulator unit or an assembly of such units and is intended to give rigid
More informationVDF G G VDF G G VDF G G METALLIC HOSE 12GF FITTING FOR SOLDERING 12 12G
3.4- ACCESSORIES 3.4.1- GAS ACCESSORIES VDF G31-37 12G...3.4.1.1 VDF G20-20 12G...3.4.1.2 VDF G25-25 12G...3.4.1.3 METALLIC HOSE 12GF 700...3.4.1.4 FITTING FOR SOLDERING 12 12G.3.4.1.5 FITTING FOR SOLDERING
More informationTiming Drive Components Camshaft Timing
SECTION 303-01B: Engine 4.0L SOHC 1998 Explorer/Mountaineer Workshop Manual IN-VEHICLE REPAIR Procedure revision date: 10/17/2002 Timing Drive Components Camshaft Timing Special Tool(s) Timing Chain Tensioner
More informationCleveland-Kidder Ultra
LOW PROFILE Low Profile Load Cell Providing up to a 40:1 Tension Range Performance Benefits Cleveland Motion Controls new Ultra Line Slim Cell is part of the new Line Tension family. a unique low-profile
More information477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength
3M 477-kcmil, 3M Brand Composite Conductor Compression Dead End Evaluation Mechanical Holding Strength Principal Investigator: Dr. Kamal Amin Reviewed by: Dr. Colin McCullough Date of Report: June 1, 2003
More informationREPORT HOLDER: CLARKDIETRICH BUILDING SYSTEMS 9050 CENTRE POINTE DRIVE, SUITE 400 WEST CHESTER, OHIO EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1464 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More information2002 Escape Workshop Manual
SECTION 303-01B: Engine 3.0L (4V) IN-VEHICLE REPAIR Procedure revision date: 10/09/2003 Timing Drive Components Removal CAUTION: Failure to verify correct timing drive component alignment will result in
More informationMagnaMount. Weigh Module Kit. Installation Guide
MagnaMount Weigh Module Kit Installation Guide 25707 Contents 1. Introduction... 1 2. Parts Assembly... 2 2.1 Assembling the Base Plate... 2 2.2 Assembling the Retaining Plate... 3 2.3 Assembling the Dummy
More informationFeasibility of Ultra Long-Span Suspension Bridges Made of All Plastics
IASE SYMPOSIUM MELOURNE 1 Feasibility of Ultra Long-Span Suspension ridges Made of All Plastics Ken-ichi MAEDA Professor Dr. Eng. Tokyo Metropolitan Univ. Tokyo, Japan Torahiko IKEDA ridge Engineer M.
More informationCEILING MOUNTED WORK STATION STEEL BRIDGE CRANE
SECTION 14636 CEILING MOUNTED WORK STATION STEEL BRIDGE CRANE ***** Gorbel, Inc. manufactures a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work
More informationTiming Belt: Service and Repair Timing Belt Replacement
2003 Saturn Truck VUE V6-3.0L VIN B Copyright 2007, ALLDATA 9.50 Page 1 Timing Belt: Service and Repair Timing Belt Replacement Removal Procedure 1. Remove the front timing belt cover. 2. Rotate the crankshaft
More informationSTS SYSTEMS PRODUCT CATALOGUE.
STS SYSTEMS PRODUCT CATALOGUE CONTENTS Civil 4 Construction 18 Mining 46 Contact STS Systems 64 Supporting our world s infrastructure STS Systems, originally Severs Technical Systems, was formed in 1992.
More informationwestern for products manufactured in White City, Oregon
western VERSA-LAM SPECIFIER Guide for products manufactured in White City, Oregon Western VERSA-LAM Guide 11/29/2012 2 VERSA-LAM Products An Introduction to VERSA-LAM Products When you specify VERSA-LAM
More informationNOOK 10'-9" x 11'-11" KITCHEN 13'-2" x 11'-11"
1344 GARAGE 21'-8" x 21'-4" 16070 3068 5068 3068 2430DH 5068 2030DH 3049DH 3049DH D/W KITCHEN 13'-2" x 11'-11" FAMILY 24'-3" x 11'-8" NOOK 10'-9" x 11'-11" DN 4068 2068 4068 2468 3056DH 3056DH 55610 3056DH
More informationNext Generation Of Panels durable continuous surfaces
PLAN NE Next Generation Of Panels durable continuous surfaces WALL StonePeak leads the way forward with a new generation of panels. Through concentrated research and ongoing innovative experience, we have
More informationInstallation Manual. Talon Series. Portable Vehicle Scale by Fairbanks Scales, Inc. All rights reserved.
Installation Manual Talon Series Portable Vehicle Scale 2007-2012 by Fairbanks Scales, Inc. All rights reserved 51158 Revision 5 12/12 Disclaimer Every effort has been made to provide complete and accurate
More informationDesign principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
More informationSupreme. Supreme Framing System. Product Catalog IAPMO UNIFORM ER #0313
Supreme Supreme Framing System Product Catalog IAPMO UNIFORM ER #0313 2507 Table of Contents Certification of Materials 5 LEED Credits 5 Independent Product Certification 5 Code Approvals, Performance
More informationADDENDUM DOOR COMPATIBILITY FOR MODEL 3950
IMPORTANT INSTALLATION INSTRUCTIONS It is important to identify the door type before attempting an installation of the Model 3950 door operator. MOUNTING OPTIONS: 1 2 3 Standard wall mount using the brackets
More informationLow Impact Light Rail Update
Low Impact Light Rail Update Forward plan: All contracts to be signed up by end of August 2014. All feasibility to be completed by end of 2014/14 financial year. Down selection to those projects to be
More information3. Using the ST, align the Top mark on crank sprocket to nine o clock position as shown in the figure
2008 Tribeca (3.6L) MECHANICAL(H6DO) > Timing Chain Assembly Report a problem with this article INSTALLATION Be careful that the foreign matter is not into or onto assembled component during installation.
More informationIBC 2009/2012 COMPLIANT. Supreme Framing System. Product Catalog
IBC 2009/2012 COMPLIANT 2507 Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What is the Supreme Framing System? Supreme Framing
More informationCERTIFICATE OF APPROVAL No CF 5267 SHERWIN-WILLIAMS
CERTIFICATE OF APPROVAL No CF 5267 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Tower Works, Kestor
More informationDesign Tables 2015 Formwork and Shoring
Design Tables 2015 Formwork and Shoring Design Tables 2015 e 2 e 1 F 1 F 2 h q A 20 I Q q q x I 2 Q F1 F 1 x I e 1 I Q F2 F 2 x I e 2 I Updated version 1 Edition 09 2015 PERI Formwork Scaffolding Engineering
More informationCAMSHAFT TIMING CHAIN, SPROCK... CAMSHAFT TIMING CHAIN, SPROCKET, AND TENSIONER REPLACEMENT (LE5 OR LE9) (ENGINE MECHANICAL - 2.2L OR 2.
CAMSHAFT TIMING CHAIN, SPROCK... CAMSHAFT TIMING CHAIN, SPROCKET, AND TENSIONER REPLACEMENT (LE5 OR LE9) (ENGINE MECHANICAL - 2.2L OR 2.4L) Document ID# 2133175 Camshaft Timing Chain, Sprocket, and Tensioner
More informationSTANDARD SPECIFICATIONS
American National Standard SJI-K 1.1 STANDARD SPECIFICATIONS FOR OPEN WEB STEEL JOISTS, K-SERIES SECTION 1. SCOPE Adopted by the Steel Joist Institute November 4, 1985 Revised to November 10, 2003 - Effective
More informationU.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM
U.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has
More informationLOADS BRIDGE LOADING AND RATING. Dead Load. Types of Loads
BRIDGE LOADING AND RATING LOADS 0 1 Types of Loads Bridges are subjected to many different types of loads. There are three important types of bridge loads: Dead load Live load Other loads Dead Load Dead
More informationMEGAFAR MAST. N.C.M s.r.l.
MEGAFAR MAST N.C.M s.r.l. LIIGHTIING POLES AND MASTS sede legale : Via Bramante, 24 Offices and store: Via Marconi, 103 20020 MAGNAGO - Italy Tel.+39 0331 657001 ( ric. Aut.) fax +39 0331 305845 - e-mail
More informationUS 191 Load Rating Past and Present. By Ron Pierce, P.E.,S.E., CBI David Evans & Associates Bridge Operations Services Practice Leader
US 191 Load Rating Past and Present By Ron Pierce, P.E.,S.E., CBI David Evans & Associates Bridge Operations Services Practice Leader Inspection Experience Bridge Inspection with Idaho Transportation Department
More informationCase Study of Bridge Load Rating in KY using BrR. C.Y. Yong, P.E., S.E., ENV-SP
Case Study of Bridge Load Rating in KY using BrR C.Y. Yong, P.E., S.E., ENV-SP Project Overview Choosing the Right Tool Validation Challenges Conclusions Outline KY Bridge Load Rating Horizontally curved
More informationCAUTION: Do not compress the ratchet assembly. This will damage the ratchet assembly.
Installation Engines with ratcheting timing chain tensioners 1. CAUTION: Timing chain procedure must be followed exactly or damage to valves and pistons will result. CAUTION: Do not compress the ratchet
More information