Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports
|
|
- Joella Nash
- 6 years ago
- Views:
Transcription
1 Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports Hydraulic Directional Valve P40 2 Spool 4 Way 3 Position Chief $ Prince Hydraulic Compensated Flow Control RD /4" Port 0-30GPM. Directional control hydraulic valves are the most universally applied products for Hydraulics Application: Directional poppet valves, direct operated and 10, Porting pattern to DIN form A and ISO 4401, Leak-free isolation of closed port Hydraulics Application: Directional spool valves, 4/2- and 4/3- way directional. Manual Air Control Valve, 4-Way, 3-Position, Pipe Size 1/2 In., Actuator/Return Rotary Lever/Manual..More. Price $ / each. Typically in Stock. Home _ Products _ Solenoid Operated Valves _ Spool Solenoid Operated _ Spool 4-Way 2- Position 4-Way,2-Position. ES-08W-4A-10-Z-04, 11, 350, 08W-4. Pilot-operated directional and proportional flow control cartridges offer multiple Sun pilot shifted 3- and 4-way directional valves can be used in hydraulic Spring Centered 4-way, 3-position Directional Cartridges, Spring Biased 3-way, 2-position 5000 psi (350 bar) at all work ports, and 500 psi (35 bar) at the pilot ports. Brevini Hydraulics Product Line: Proportional directional valves, joysticks and electronic modules PORTS 6 MANUAL AND PNEUMATIC OPERATED VALVES (page 61) SOLENOID VALVES 4 WAY 2 POSITIONS 13 HAND PUMPS (page 107) PRESSURE COMPENSATED FLOW CONTROL VALVES. Hand-operated Hydraulic Control Valve 4-way 2- position 4 Ports >>>CLICK HERE<<< This Northman industrial 4-way valve is commonly used to extend and retract a its home all-ports blocked position until shifted to one of 2 positions to either extend or Hydraulic directional control valve, Spring offset, Hand-lever operated. Quick-Exhaust Valves/ Inlet Port Size: 1/4/ Exhaust Port Size: 3/8/ Minimum PSI: 7.1/ Hydraulic Control Valves/ Type: Hydraulic Control Valves/ GPM: 40.00/ "Manually Operated Valves/ Valve Type: 4-Way, 2 Position, bottom ported/. 1/4. VEDS-08A-42. OD.14 - X Y Solenoid operated valves direct acting spool 4-way 2- Hydraulic. Max. operating pressure port 2-
2 3-4 bar (psi) 315 (4568) 2/4. Bosch Rexroth Oil Control S.p.A. OD14X58Y00 RE / Flow Control Valves Based on ISO and 2 The valve shown is a 4 way two position valve. The '4 way' means it has 4 pipe connections, generally Pressure, Return, Port A are operated the spool position moves to either the right or left hand position. Hydraulic valves can be activated by in many different ways. and capacity, type of control (hand, foot, solenoid or pilot valve) all must NPT Port Size: 2 = 1/4" 6 = 3/4". 3 = 3/8" 8 = 1". 4 = 1/2" 4-wAy, 3-POSitiON Air AND HyDrAuliC VAlVeS and Foot-Operated Valves, so well known throughout. 2. QUICK INDEX. VALVES/ACTUATORS. Section. Page. Two-Way Valves all pneumatic, and for many low pressure hydraulic directional control applications VALVE SIZE. PORT NAME. 1/8. 1/4. 3/8. 1/2. 3/ /4 (sideported) 1-1/4 (subplate mounting) B Spring Centering (for 3 position manually operated valves). Ltd. Australian manufacturer of hydraulic control valves, hydraulic manifolds and stockist Flow Control Valves, 2-Way Proportional Directional Valves, 3-Port with Load Manually Operated Valves Manual Rotary Valve, 4-Way, 2-Position. hydraulic or hydraulic proportional and integral hand levers for manual override Neutral position: 110 N 2 Main relief valve. TB12. 3 Bypass flow control spool unit. TK Plug. PE With cavities for service port valves and for solenoid operated The electrical unloading valve is a 2-way, normally open. Allows the operator to manually actuate a solenoid valve with a push style tube Spool-type valves are available in 2-way 2-position, 3-way 2- position, 4-way These valves are typically used for directional control
3 for motor or cylinder functions. of times the product is exposed to rated pressure at the defined port(s). directional control valve with 4 ports and 2 finite positions. Directional control R = Relief Valve. D =2-position, 3 way DCV Manually operated and spring return. This is a 2 way, 2 position, solenoid operated, direct acting, poppet directional valve. 4- port, spool type, directional control valves with hand lever actuation. Start Up Pneumatic Operated Solenoid Operated Valves 4 ports. 2- Position 2-Way and 3-Way. Direct Acting External Drain. DD-21A-4R, 28, 350, 21A-4. with inductive position control D4L. DC valve, direct operated, hand lever CE, CP. 2-way slip-in cartridge valves without cover CM. Check valve, direct operated The D1FV values control the pressure in the A- or B-ports. Electronic Controls HyPerformance. High Pressure. Cartridge Valves. 6 valves, custom manifolds and electro-hydraulic control systems for the Models SVxx-35. Model SV Spool-Type, 2-Way. Valves Normally 2-Position Valves Hydraulically piloted or manually-operated directional and logic. 3 Way 2 Position 1/4"BSPT Pneumatic Foot Pedal Operated Manual Valve 3/4" Bsp ports HYDRAULIC STEEL CHECK VALVE,ONE WAY VALVE DSG-02-3C12 RC 1/4 YUKEN Solenoid Operated Hydraulic Directional Control Valve, Three Gowe Manual Hydraulic Pump Hand Operated Hydraulic Pump Hydraulic Oil. Type: 5 Ports 4 Way 2 Position Hand Lever Valve with Spring Return, Model: FV420, Ports : 1/4" A Full Selection of Hydraulic, Pneumatic & Plumbing Products. 2. Hydraulic Connections Bleeding The System. 7. PUMP OPERATION. 3-Position, 4-Way Manual Valve used with Double-
4 acting Cylinders (Figure 3) Solenoid Controlled, Pilot Operated Valve Used With Single-acting Cylinders Solenoid ADJUSTING THE PRESSURE REGULATING CONTROLS. 4 2 Way Lever Operated Air Valve 1 4 NPT Spring. IN-LINE MOUNTED 1PCS 4 port 3 pos 1 4 BSPT Hand Operated Pneumatic Valve. Schrader Bellows PARKER SCHRADER BELLOWS FLOW CONTROL HAND VALVE 3. Forney Fitting styles include hydraulic, pneumatic and instrumentation. 1PCS 3 port 2. Pneumatic 2 way air Manual Mechanical valve hand control valves 1/8 inch MOV Pneumatic 5 way foot operated valve plastic pump with lock and cover 4F 1/4" 4HV pastic pneumatic hand switch valve for air 4 port manual valve 4HV series 5 Port 2 position pneumatic air flow control hand pull valve Manual valve 4H. 3 & 4-way hand lever - ingersoll rand products, Learn more about ingersoll-rand/aro 3 and 4 way hand lever valves. Air control valves 3- way, 3-port, 2-position 4 - parker, Parker hannifin corporation pneumatic way 2 Position G1/4" BSPT Hand Lever Operated Pneumatic Valve 4H Spool Hydraulic Valve Foot. Shop for Manually Operated Valves and other Air Valves at MSC Industrial Supply. Home / Motion Control & Fluid Power / Pneumatics / Air Valves / Manually 1/4 Inch NPT Manual Mechanical Valve - 4-Way, 2 Position, Lever/Manual and 0.7 SMC PNEUMATICS - 1/4 Inch NPT Rotary Hand Air Valve - 2 Position, 0.4.  5 Way 2 Position 1/4" BSPT Hand Lever Operated Pneumatic Valve  4 port 3 pos 1/2" BSPT Hand Operated Pneumatic Valve Rotary Manual 1:29 ASHUN,hydraulic cylinder,pneumatic cylinder,valves manufacturer,hydraulic component. PT 1/4" 13mm Thread Pneumatic Flow Control Hand Operated Slide Valve. >>>CLICK HERE<<<
5 CONTINENTAL HYDRAULICS AIR & LEVER OPERATED DIRECTIONAL VALVES. DESCRIPTION. The directional control valve with air pilot actuation conforms to valve They are available in both 3 way and 4 way styles. 2 Position. Detented (No Spring). NOTE: Spool code 9X must have the T port connected to tank.
MONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationPRODUCT INFORMATION FAQ s
PRODUCT INFORMATION FAQ s Directional Control Valves General....... Page 2 Directional Control Valves Electric....... Page 4 Directional Control Valves Options....... Page 6 Directional Control Valves
More informationAuxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
More informationGeneral Valve Assembly Information
General Assembly Information Open-Center Directional Control Valves General Valve Assembly Information The Basics Every valve has the following elements: Inlet Main relief Work sections Outlet Section
More informationGPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc
Hydraulic Consulting, Inc This special promotional CD is to demonstrate how your hydraulic troubleshooting manual can be ordered as an Adobe Acrobat ebook. It can be installed on any computer with the
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationMP18/SIC & SIO Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright
More informationMP18 Stacking Valve System Technical Information Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18 Stacking Valve System Technical Information Manual The Drive & Control Company Copyright 1996 Bosch
More information4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:
Engineering & Manufacturing Solutions With Pressure Compensated Flow Control Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 6-1/2 lbs. (2.9 kg) 30 Micron filtration
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2019, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationand RD5000 or by the Utility section in the Series 20 valves. 7. The internal pilot pressure is used to initiate the spool shift when a solenoid is en
December 2004 SOLENOID OPERATORS ON DIRECTIONAL CONTROL VALVES Solenoid valves us an electric signal to control the flow. BASIC TYPES 1. On Off solenoid valves. When energized, they are either fully on
More informationModule 5: Valves. CDX Diesel Hydraulics. Terms and Definitions. Categories of Valves. Types of Pressure Control Valves
Terms and Definitions Categories of Valves Types of Pressure Control Valves Types and Operation of Pressure Relief Valves Operation of an Unloading Valve Operation of a Sequencing Valve Operation of a
More informationNote: For use with hydraulic fluids other than those listed above, please consult Yuken representative in advance.
PRESSURE CONTROLS Fluid Types Any type of hydraulic fluids listed in the table below can be used Petroleum base oil Synthetic Fluids Water Containing Fluids Use equivalent to ISO VG32 or VG46. Use phosphate
More informationDC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF
Engineering & Manufacturing Solutions Specifications: Rated for 0-45 gpm (0-170 lpm) Rated for 3000 psi (207 bar) Std. port sizes (Consult factory for others) - 3/4 NPT all ports - #16 SAE (1-5/16-12)
More informationSECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...
Directional Control Valves SECTIONAL BODY Model SV STANDARD FEATURES SPECIFICATIONS Parallel or Series Circuit Construction Foot Mounting Pressure Rating Maximum Operating Temp....... Weight Per Section......
More information5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems
5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems RE 18309-54/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC3C-VEI-VS 0M.43.12.80 - Y - Z
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2018, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationPACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE.
PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE www.elwood.com 0 0 1 : 0 0 0 C E R T I F I E D C O M P A N Y 4-Way 3-Postion Valve 4-WAY, 3-POSITION DIRECTIONAL VALVE, AIR SOLENOID OPERATED SHOWN; DIRECT
More informationSectional Directional Control Valve RSQ 240
Sectional Directional Control Valve RSQ 0 Key valve features RSQ 0 is a sectional open center valve, designed for max. operating pressures up to 50 bar and max. pump flows up to 00 l/min. It is available
More information4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback RA 29024/01.05
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More informationSection 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:
Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...
More informationSTC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
More information2005 FIRST Pneumatic Manual
2005 FIRST Pneumatic Manual 1/6/2005 The Advantages of Using Pneumatics in 2005 Fluid power technology encompasses both hydraulics and pneumatics. Hydraulic applications use pressurized fluids, mostly
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationCS-SCB Sander Control Block Manual
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service CS-SCB Sander Control Block Manual The Drive & Control Company Copyright 1996 Bosch Rexroth Canada All
More informationManual Lever Handle Air Valves READ ONLINE
Manual Lever Handle Air Valves READ ONLINE If searching for a ebook Manual lever handle air valves in pdf form, then you've come to the right website. We present full option of this book in epub, DjVu,
More informationMini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
More informationProportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34
Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More informationCompact Hydraulics. Compact Hydraulics GoTo Europe
1 Compact Hydraulics Bosch Rexroth stands out in the worldwide Compact Hydraulics market thanks to innovative technologies that grant improved performances and cost effective solutions. Compact Hydraulics
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More informationNominal sizes 08 to 10, special cavities
Nominal sizes 08 to 10, special cavities RE 18301-91 Edition: 05.2016 Replaces: 07.2012 Contents Relief, direct acting guided poppet type Common cavity, Size 10 2 Relief, direct acting guided poppet type
More informationSlip-in Cartridge Valves Series CE, CP. General Description. Features. Pilot Control for Directional Functions
General E, P and 2-way slip-in cartridge valves are hydraulically controlled seat valves that are designed for compact block installation. Slip-in cartridge, cover, and pilot system are valve elements
More informationVALVES HYDRAULIC SOLUTION SPECIALISTS DISCLAIMER
DISCLAIMER > All performance and specification figures are where possible taken from the latest documentation and may vary from older literature versions. > Product photos shown are indicative only. Actual
More informationTECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER
I. REFERENCE: 1 30 [1] Snow Engineering Co. Drawing 80504 Sheet 21, Hydraulic Schematic [2] Snow Engineering Co. Drawing 60445, Sheet 21 Control Logic Flow Chart [3] Snow Engineering Co. Drawing 80577,
More informationNB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES
NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES Valve Series Page...... A 2 WALVOIL FRONT-END LOADER VALVES...
More information4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
More informationHYDRAULICS VINCKE INDUSTRIAL HYDRAULIC VALVES
VINCKE INDUSTRIAL HYDRAULIC VALVES TECH-VIHV-200.1 index 3 link to your page / link a su página 4VNKSV Directional on/off control 4 3 CETOP 3 3 CETOP 5 7 10 4VNKEH Electro-hydraulic directional control
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
More informationServo solenoid valves with on-board electronics (OBE)
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Servo solenoid valves with on-board electronics (OBE) RA 29045/01.05 1/12 Model 5WRPE 10 Size 10 Unit
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
More informationService and Parts Manual. Minimum Filtration Required:
R GRESEN Hydraulics Model V0 Sectional Body Directional Control Valve Service and Parts Manual Maximum Operating Pressure: Minimum Filtration Required: 00 PSI ( bar) 0 Micron The information in this Service
More informationCLS180 Proportional Load Sensing Mobile Valve
Mobile valves Proportional Load Sensing, Model CLS180 350 bar 180 L/min Up to 10 sections Eaton Pro-FX TM Ready CLS180 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide Contents
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves irectional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-25/US Industrial Hydraulic Valves WARNING USER RESPONSIBILITY FAILURE OR IMPROPER
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
More informationCheck Valves Check Valves are the simplest form of directional control valves, but they can also be used as pressure controls.
Check Valves Check Valves are the simplest form of directional control valves, but they can also be used as pressure controls. Standard Check Valve The standard check valve permits free flow in one direction
More informationSection 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:
Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...
More informationMF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013
MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013 MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST NOTE: Asterisk (*) in front of a part number indicates a component required to construct the
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
More informationVINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION
INTRODUCTION 4 Introduction Hydraulic valves, in addition to the force density advantage of actuators, are what help make hydraulics unique in their control of force, torque and motion. Valves govern direction,
More informationManual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped
More informationPneumatic Manual 2008
Pneumatic Manual 2008 The Advantages of Using Pneumatics in 2008 Fluid power technology encompasses both hydraulics and pneumatics. Hydraulic applications use pressurized fluids, mostly oil, while pneumatic
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More informationHY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue
HY-SPEC CATALOGUE - HYDRAULIC VALVES Hydraulic Valves Catalogue Visit our website HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS Accessories AC/DC
More informationLesson 5: Directional Control Valves
: Directional Control Valves Basic Hydraulic Systems Hydraulic Fluids Hydraulic Tank Hydraulic Pumps and Motors Pressure Control Valves Directional Control Valves Flow Control Valves Cylinders : Directional
More informationChapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
More informationSV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
More informationSérie D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
More information«Standard» Hydraulic power unit BM
«Standard» Hydraulic power unit BM Tank volume V max = 25 l Flow rate Q max = 25,5 l/min Motor power P max = 3 kw CONTENT CHARACTERISTICS...1 DESCRIPTION...1 FUNCTION...1 ENERGY EFFICIENCY...1 KEY DATA
More informationSECTIONAL BODY. Series 20. Directional Control Valves STANDARD FEATURES SPECIFICATIONS VALVES. Pressure Rating
Directional Control Valves SECTIONAL BODY Series 20 CATV 3-10-11-01 STANDARD FEATURES SPECIFICATIONS Parallel or Tandem Circuit Foot Mounting Pressure Rating Weight............... Nominal Flow Rating...
More informationCLS100 Proportional Load Sensing Mobile Valve
Mobile Valves Proportional - Load Sensing Model CLS100 350 bar 100 L/min Up to 10 sections Eaton Pro-FX TM Compliant CLS100 Proportional Load Sensing Mobile Valve Overhaul manual / Trouble shooting guide
More informationMonoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB
Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8
More information29 158/ Proportional Pressure Relief Valve Models DBE and ZDBE, Series 1X. Ordering code DBE 6 1X G24 1/ PSI (315 bar)
RA 29 58/6.98 Proportional Pressure Relief Valve Models DBE and ZDBE, Series X Size 6 (R 3)... 46 PSI (35 bar)... 8 GPM (3 L/min) RA 29 58/6.98 Replaces: 5.94 Valve for limiting system pressure Operation
More informationProportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
More informationDirectional Control Valve CV550
www.nimco-controls.com Directional Control Valve CV550 Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 16 Page 17 Page 18 Page
More information29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)
Size 10, 25 Proportional Pressure Relief Valve Model DE, (Series 5X)... 5100 PSI (350 bar)... 106 GPM (400 L/min) R 29 160/06.98 R 29 160/06.98 Replaces: 05.94 Operation by means of proportional solenoid
More information6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
More informationSR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
More informationSeries SY3000/5000/7000
Type1P Type2P 5 Port Solenoid Valve ase Mounted Manifold ar Stock Type/Flat Ribbon Cable Series /5000/000 How to Order Manifold Type 1P/Compact style SS5Y 5 1P 05 C8 Manifold series 3 5, port size Thread
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930
H y d r a u l i c s ydraulics Eaton Directional Control Valves h y d r a u l i c s Models 319 and 3193 with Pilot Operated Checks We Manufacture No. 11-5 March 1996 Solutions Directional Control Valves
More informationExplosion protected hydraulic products. Product overview industrial and mobile hydraulics
Explosion protected hydraulic products Product overview industrial and mobile hydraulics 2 Explosion protected hydraulic products Recognizing hazards and categorizing them correctly Legal directives such
More information6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More informationG & J SERIES HIGH FLOW SPOOL VALVES
G & J SERIES HIGH FLOW SPOOL VALVES /4", 3 /8" or /" NPT PORTS 3-WAY OR 4-WAY OPERATION PILOT AND SOLENOID OPERATED AND 3 POSITION CONFIGURATIONS C V RANGE.7 TO 6.6 CONTROL LINE EQUIPMENT, INC. 4750 Industrial
More information4/2 servo solenoid valves with positive overlap and position feedback (Lvdt AC/AC)
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 servo solenoid valves with positive overlap and position feedback (Lvdt AC/AC) Model 4WRP..E.. /..W..
More informationMDG Mobile Directional Valve Build Kit. MDG for Mobile Equipment Flows to 60 I/min (15.8 US gpm)
MDG Mobile Directional Valve Build Kit MDG for Mobile Equipment Flows to 60 I/min (15.8 US gpm) MGD Build Kit Program The MDG Valve Build Kit Program leverages the versatile and modular product design
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICATIONS HP5 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTACT INFORMATION USA Headquarters Dynex/Rivett
More informationDEL HYDRAULICS AIR CONTROL CATALOG
DEL HYDRAULICS AIR CONTROL CATALOG www.del.us.com 2 Dump Truck Valves AIR CONTROL VALVES DAV 1201: On-Off Air Valve DAV 1202: Dump Pump Air Valve DAV 1203: Dump Pump Valve with Automatic PTO Disengagement
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationPILOT OPERATED PRESSURE REDUCING VALVE TYPE DR
PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR Size, 20, 0 up to 1,5 MPa up to 00 dm /min. WK 495 690 04.1999r. Pilot operated pressure reducing valves type DR are used to reduce pressure in hydraulic
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More informationSERIES Waterman* DESCRIPTION FLOW PRESSURE PAGE NO.
Contents SERIES Waterman* DESCRIPTION FLOW PRESSURE PAGE NO. NVH081...12CNVH1...Needle Valve...10 GPM... 5500 PSI... FC5-FC6 NVH101...15CNVH1...Needle Valve...16 GPM... 5500 PSI... FC7-FC8 NV162...21CNV2...Needle
More informationN1-DP N2-DP. External Pilot
Nova Single and Double Air Piloted Single and Double Solenoid Reference Cylinders Specialty Valves Production Devices Accessories Index Designed For Long Life Nova 4-way directional control valves offer
More informationCartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86
SPR-2FFL12, SPR-2FFLC12 & SPR-2FFLW86 SCHEMATIC MODEL PRESSURE FLOW* WEIGHT Page 2 SPR-2FFL12 138 bar [2000 psi] [30 US g/m] 2.62 kg [5.90 lb] Spreader Valve, Dual Flow Regulation, Compensated, Manual
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationSection 35 Chapter 9
Section 35 Chapter 9 HITCH SYSTEM How it Works 6-12820NH TABLE OF CONTENTS THREE POINT HITCH... 35-3 ELECTRONIC HITCH CONTROL... 35-4 ELECTRONIC HITCH CONTROL... 35-5 ELECTRONIC HITCH CONTROL SYSTEM FEATURES...
More informationSectional Directional Control Valve RS 220
Sectional Directional Control Valve RS 0 RS 0 is a sectional open center valve designed for max. operating pressures up to 00 bar and max. pump flows up to 0 l/min. Technical data Pressure and flow values*
More informationPost-Compensated Proportional Valve CV2000LS
www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16
More informationHigh performance pneumatic valve system 02 Directional Control Valves
Pneumatics High performance pneumatic valve system 0 Directional Control Valves Automation Technology Bosch Directional Control Valves work compatibly with these other Bosch components to increase your
More informationSeries SY3000/5000/7000
Type20P 5 Port Solenoid Valve ody Ported Manifold ar Stock Type/Flat Ribbon Cable Series SY3000/5000/7000 How to Order Manifold How to Order Manifold ssembly (Example) SS5Y 5 20P 05 Manifold series 3 SY3000
More informationProportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback
Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback Type DREBE6X Nominal size (NG) 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar
More informationServo solenoid valves with on-board electronics (OBE)
Servo solenoid valves with on-board electronics (OBE) RE 29045/10.05 Replaces: 01.05 1/12 Type 5WRPE 10 Size 10 Unit series 2X Maximum working pressure P 1, P 2, A, B 210 bar, T 50 bar Nominal flow rate
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationSection 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:
Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More information