DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
|
|
- Arline Ross
- 6 years ago
- Views:
Transcription
1 By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental protocol is necessary. Please refer to the below referenced supplemental protocol(s) for additional information. A California Proposition 65 DILL-AN-PTCL USA - The sample should be reviewed against the requirements of California Proposition 65. LABELING US Packaging labeling Labeling review: country of origin Use labeling Labeling review: leather Claim verification - level 1 Producer's markings Small parts warning F.P. and L. Act (16 CF 500) O NIST Uniform Laws and egulations Handbook CF 300/303, 19 CF CPSD-GB Packaging shall be labelled with the following, Product Identification Net quantity of contents shall be expressed in terms of weight or mass, measure, numerical count, or combination so as to give accurate information to facilitate consumer comparison (U.S. and metric units) anufacturer, packer, or distributor s name & address (City, State & Zip Code) 1 Shall indicate country of origin legibly, permanently, and in comparable size and close proximity to any mention of country other than country in which the article was manufactured or produced. ust be visible at point of purchase. 1 Use/care instructions shall be clear, concise and understandable, provide stepby-step method of use and be provided in language appropriate to destination countries. Provide a copy of the instructions in the report. 16 CF 24 [Leather labeling] AST F Sec (od) ust comply with FTC leather labeling guidelines. ust comply to claims. [Only if applicable] eport actual. Shall comply with requirement. 1 [Only if applicable] ANALYTICAL A Total lead in surface coating CPSD-GB AST F Sec. 7 (od) CPSC-CH-E / CPSD-AN- CHOKING HAZAD - Small parts. Not for children under 3 yrs. - accessible surface coatings in the as received state on items outside of the scope of 16 CF 1303 shall not contain lead or lead components in which the
2 By/Date: Page 2 of lead content is in excess of 0.009% (90 ppm) of the weight of the total content. eport actual results or include data table within report. Component testing is allowed. Compositing up to 3 colors is allowed. Client requirement PHYSICAL ECHANICAL AND ELECTICAL HAZAD Sharp point and 16 CF Shall have no sharp points/edges, other than those required for function. sharp edge & 49 Use and abuse 16 CF No hazards. (small parts, sharp edges, points) & 49 / AST F Sec. 4.7 & 4.9 (od) Projections AST F Shall be free from projections. Sec. 4.8 (od) Plastic film AST F Sec (od) Torque test for removal of components Tension test for removal of AST F Sec. 8.8 (od) AST F Sec. 8.9 (od) components Drop test AST F Sec (od) Compression test AST F Sec (od) FLAABILITY Solids - 16 CF Flammability (c)(6)(vi) / 16 CF PHYSICAL CHAACTEISTICS Dimensions CPSD-GB Dimensions - depth CPSD-GB [Packaging - film] Shall not be less than mm. 1 [As per table 5] Shall meet all requirement, no hazards. 1 [As per table 5] Shall meet all requirement, no hazards. 1 [As Per Table 5] Shall meet all requirements, No hazards 1 [As Per Table 5] Shall meet all requirements, No hazards 1 Shall meet requirements < 0.1 inch per second horizontal burning. 1 eport overall dimensions; shall meet label claims (If applicable) (-0% / +5%). 1 eport overall depth; shall meet label claims.
3 By/Date: Page 3 of 6 Dimensions CPSD-GB [Handle drop] eport overall dimensions; shall meet label claims. Dimensions CPSD-GB [Shoulder strap drop circumference] eport maximum and minimum dimensions; shall meet label claims. Other features CPSD-GB Shall be as claimed. Fabric weight AST D a 1 ± 3% as claimed 2013 Dimensions - thickness CPSD-GB [aterial qualities] eport overall thickness; shall meet label claims. (If applicable) (-0% / +5%). Number of main CPSD-GB Shall be as claimed. compartments Number of CPSD-GB Shall be as claimed. internal pouches or pockets or openings Number of CPSD-GB Shall be as claimed. external pouches or pockets or openings Yarn construction AST D Shall be as claimed (± 3.0%). (2011) Fabric count of woven fabric AST D Shall be as claimed (± 3.0%). WOKANSHIP Fabric defects AST D (2016) Defects and workmanship PEFOANCE Actual use - functionality CPSD-GB CPSD-GB No critical / major defects. Shall have no discernible surface degradation, including crazing, shivering, denting, bubbles, cracks, stains, deformations, chips, fractures, heavy lines, waves, shear marks, scratches, scuff marks, indentations, or blisters. Shall have no components missing, malformed, and/or fractured. Shall function as intended. eport details of evaluation (materials used / features tested / consumables / method / etc.)
4 By/Date: Page 4 of 6 Breaking strength AST D of textile fabrics: 2013 grab test Tearing strength: Elmendorf apparatus Tearing strength: Elmendorf apparatus AST D e1 AST D e1 Seam strength AST D e1 (od) Handle 45 degree Operability of zippers Strength tests for zippers Abrasion resistance of fabric: rotary platform, doublehead method AST D e1 (od) AST D AST D AST D A oisture content CPSD-HL A Drop test CPSD-HL (od) 2 Shell: minimum 25 lbf Lining: minimum 20 lbf Note: Pass / fail base on result of overall fabric break. 2 Shell: 2.0 lb minimum. 2 Lining: 1.5 lb minimum. 2 Side seam: 25 lb minimum. Zipper seam: 25 lb minimum. Bottom seam: 25 lb minimum. Lining woven: 20 lb minimum. Vinyl woven: 10 lb minimum. odification: Expanded the scope to other than apparel. 2 Clutch: 10 lb minimum. Large: 20 lb minimum. edium: 15 lb minimum. ini: 5.0 lb minimum. odification = Expanded scope to other products. 1 Open and close: 2.0 lb maximum. 1 Cross widthwise strength: 15 lb minimum. Scoop pull: 10 lb minmum. Top stop: 10 lb minimum. Bottom stop: 10 lb minimum. Slider pull: 5 lb minimum. Slider torque: 2 lb minimum. 1 Abradent: CS17, Head weight, 1000g, 500 cycles eq.: Loss in breaking: 10% of original break load. 1 [Wood components] Less than 12%. 1 [Wood components] odification = One 12 in. drop - remain intact.
5 By/Date: Page 5 of 6 Effects of extreme CPSD-HL temperature change Water repellency: spray test esistance to corrosion COLOFASTNESS Colorfastness to crocking Colorfastness to rotary crocking 1 Shall withstand for 24 hours at 32 F and then 24 hours at 120 F with no structural failure or visual change. odification: Exposure time changed from 4 hours to 24 hours. AATCC [If claimed] inimum 90 ISO rating. AST B (mod) / CPSD-HL [Applicable to samples or sample components constructed of metal or samples with metallic coatings that can be exposed to the environment] Shall withstand 24 hours in 1% salt spray (fog) with no noticeable oxidation / corrosion / visual changes. odification: 1% salt spray (fog). AATCC [Face / Back / Edge] General: Dry: Grade 4.0 minimum Wet: Grade 3.0 minimum Dark Color: Dry: Grade 3.0 minimum Wet: Grade 2.0 minimum AATCC [Face / Back / Edge] General: Dry: Grade 4.0 minimum Wet: Grade 3.0 minimum Dark Color: Dry: Grade 3.0 minimum Wet: Grade 2.0 minimum No. Of equired for Complete Testing No. Of (Fully Packed) Cartons For Transit Testing: No. Of Working Days For Complete Testing: 2 1 Only Upon Dillard s equest 5 Client Approval: Creation Date: Last evision Date: Pricing eview Date Lucy Feng 04/Apr/ /Apr/ /ar/2018
6 By/Date: Page 6 of 6 Technical eview Date: Key A Additional Charge For This Test andatory egulatory esult Key C N NA NT Claimed ecorded eets Does Not eet Not Applicable Not Tested ating Key PASS FAIL N Pass Fail Not equested
DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationDILLARD'S INC TEST PROTOCOL FOR DILL USA- (V13) KEYCHAIN / BATTERY OPERATED KEYCHAIN / KEYCHAIN WITH LIGHT
By/Date: Page 1 of 5 Criteria Notes esults ating SCOPE: This protocol is applicable for testing of keychain / battery operated keychain / keychain with light. SUPPLEMENTY POTOCOL Note: dditional cost,
More informationREPORT. Lab Number: (5105) Page 1 of 1. Index
REPORT Lab Number: (5105) 213-0075 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 1 Page 4 Pages N/A 1 Page Technical Report: (5105)213-0075 August 04, 2005 Date Received: August 01, 2005
More informationREPORT. Lab Number: (5105) Page 1 of 1. Index
REPORT Lab Number: (5105)069-0100 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 2 Pages 6 Pages N/A 1 Page TEST REPORT BATTERY HOUSE LAB LOCATION: BUFFALO, NY 365 24 TH STREET LAB NUMBE
More informationKOHL S TE ST P ROTOCOL Approved: May 10, 2017
LABELING Labeling / Packaging Review Instructional Literature /Assembly Instruction FPLA 16 CFR 500 & 19 CFR 134 Should be legibly marked with the following information: Distributor s name, trademark or
More informationIntertek Testing Services Ltd., Shanghai TFH Division Block B, Jinling Business Square,No.801 Yi Shan Road, Shanghai, China,
TEST REPORT NUMBER: SHH00285677 SERS HOLDINGS GLOBL SOURCING MERCHNDISER: CELI LIU DTE : OCT 20, 2011 DIRECT VENDOR DOMESTIC VENDOR HRDLINES TEST REPORT SHGS OFFICE HONG KONG W.O NO. -- DTE OF SUB. OCT
More informationTest Report No: EEC18/01 dated August 02, 2018
Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
More informationKOHL S TEST PROTOCOL Approved: April 25, 2017
LABELING Labeling / Packaging/ Marking Review Package or Instructions Rechargeable Batteries (If Applicable) FPLA 16 CFR 500 & 19 CFR 134 ANSI C18.1M- 1992 Sect. 7.5 (modified) All Samples Should be legibly
More informationCOMFORT PRODUCT INC. Technical Report: (1215) Initial Report Date: August 03, 2015 Date Received: July 31, 2015 Page 1 of 22
CONSUER PRODUCTS SERVICES DIVISION COFORT PRODUCT INC Date Received: July 31, 2015 Page 1 of 22 S.TAN LOT 222, LORONG 4D, SUBANG NEW VILLAGE, 40150 SHAH ALA, SELANGOR, ALAYSIA. Sample Description: 2 DRAWER
More informationUL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
More informationKOHL S TE ST P ROTOCOL Approved: May 23, 2016
LABELING Labeling / Packaging Review (If Applicable) Verify Label Claims FPLA 16 CFR 500 & 19 CFR 134 Visual Check/ Performance Claims Shall be legibly marked with the following information: Distributor
More informationDILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (ELONGATED CONFIGURATION: 150 LBS OR LESS) (V8)
Test Date: Reviewed By/Date: DILLARD S TEST PROTOCOL FOR OVER PACKAGING Labeling 1 Label identifying an "Over-packaged product for drop / vibration testing" : Report if present Over-packaged Inspection
More informationNote to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies.
Note to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies. Technology Assessment Program NIJ Standard for Metallic Handcuffs
More informationDILLARD S TEST PROTOCOL FOR DILR US PACKAGED PRODUCT TRANSIT TESTING ISTA (FLAT CONFIGURATION; 150 LBS. OR LESS) (V8)
Test Date: Reviewed By/Date: OVER PACKAGING Labeling DILLARD S TEST PROTOCOL FOR 1 Label identifying an "Over-packaged product for drop / vibration testing"; Report if present. Over - packaged Inspection
More informationSGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
More informationAccessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
More informationTHE BON-TON STORES, INC. TEST PROTOCOL FOR. BTON US WOVEN - ADULT OR CHILDRENS FABRIC (V30) No. of Samples
ByDate: Page 1 of 12 THE BONTON STORES, INC. TEST PROTOCOL FOR BTON 00301 US WOVEN ADULT OR CHILDRENS FABRIC (V30) Citation Method SUPPLEMENTAL PROTOCOLS Note: Additional cost, sample size & TAT may be
More informationUL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
More informationName of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
More informationJUVENILE PRODUCTS MANUFACTURERS ASSOCIATION INC / JPMA
CONSUER PRODUCTS SERVICES DIVISION JUVENILE PRODUCTS ANUFACTURERS ASSOCIATION INC / JPA Date Received: Page 1 of 13 TERRY GOFFE SUER INFANT, INC. 1275 PARK EAST DRIVE WOONSOCKET, RI 02895 UNITED STATES
More information11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
More informationAccreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
More informationGuide to fair wear and tear
Guide to fair wear and tear A brief guide to vehicle fair wear and tear An overview of BVRLA guidelines Simple advice for van fleets What is fair wear and tear? Fair wear and tear occurs when normal usage
More informationMIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
More informationSpecification Cloth, Fire Resistant, Softshell
Royal Canadian Mounted Police Gendarmerie royale du Canada Doc. no: G.S. 1045-373 Date: 2017-05-20 Specification Cloth, Fire Resistant, Softshell This document has 12 pages. This document was created in
More informationCOMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
More informationKOHL S TEST PROTOCOL Approved: Aug 29, 2018
LABELING Labeling / Packaging Review Uniform Law Labels for Bedding & Upholstered Furniture FPLA 16 CFR 500 & 19 CFR 134 IABFLO Should be legibly marked with the following information: Distributor s name,
More information057 - Backup Battery Charger Test Protocol
Base Test Chemical/Analytical 057 - Backup Battery Charger Test Protocol California Proposition 65 Performance Citation: California Health & Safety Code, Sec. 25210.9-25210.12 All samples shall be reviewed
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More informationThis document is expired, please contact Jennifer Buoniconti at for updated protocol information or about UL s Services.
Protocol Printed: May 2, 2016 10:24 am UL Standard Product Requirement Protocol ID: 8887 Approved by: Lardner-Stone, Anne Approved Date: May 31, 2013 Modified Date: Jun 04, 2014 Category: Item: Country:
More informationAUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
More informationTUSCANY IMPORTANT!!!
PATIO FURNITURE & ACCESSORIES ASSEMBLY INSTRUCTIONS TUSCANY 7pc Dining Set - Chair KSN: 460-06298284-8 D71 M34698 UPC: 050874012838 IMPORTANT!!! STOP! PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY.
More informationPresident For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
More informationAccreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
More informationLaboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
More informationAll Prices listed are in US Dollars 35% Discount on lab list prices, if not listed in this document
APPAREL PRICE LIST ACCESSORIES PRICE LIST COSMETICS PRICE LIST SOCKS AND HOSIERY PRICE LIST JEWELRY PRICE LIST AT HOME - HOME TEXTILES PRICE LIST ADULT FOOTWEAR PRICE LIST CHILDREN FOOTWEAR PRICE LIST
More informationAhmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTAIYO S-200W LP WHITE THERMAL CURE LEGEND INK
TAIYO S-200W LP WHITE THERMAL CURE LEGEND INK Screen Print Application Longer Pot Life (minimum of 14 days) Meets NASA Outgas Requirement RoHS Compliant Excellent Heat Resistance in HASL Low Odor September
More informationTitle: Performance Requirements of Exterior Painted Parts
Title: Performance Requirements of Eterior Page: 1 of 10 A B C D INDEX A Inde B Scope C Object D Review E Related Documents F Standard Requirements for Production Materials G System Components and General
More informationPressure Vessel Assessment Report
Project Information Client: Total Energy Location: Blackwell OK Date: 7/23/2013 Contact: Integrity Mgmt. Advisor: Chuck Easterbrooks - API 510 #2212 Cc: API / UT Inspector: Robert Van Pelt-API 510# 40899
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationVEHICLE RETURN GUIDE
VEHICLE RETURN GUIDE 1 WHAT IS FAIR WEAR AND TEAR? PURPOSE OF THE VEHICLE RETURN GUIDE OUR RECOMMENDATIONS TO BE CHECKED PRIOR TO VEHICLE RETURN ACCEPTABLE AND UNACCEPTABLE DAMAGES VEHICLE RETURN 1 WHAT
More informationEDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationQA INTERNATIONAL, LTD. INSPECTION REPORT
Report No.: QAIXXXXXX Job No.: XXXX Date: XXXXX Page 1 of 12 INSPECTION SUMMARY DETAILS QAI CLIENT COMPANY: XXXXX INSPECTION DATE: XXXXX QAI CLIENT CONTACT: FACTORY NAME: XXXXX CC: - SUPPLIER / AGENT:
More informationFord F150 Center and Side Stripe Kit(s) Part # Refer to Tables on pages 2 & 3
Ford F150 Center and Side Stripe Kit(s) Part # Refer to Tables on pages 2 & 3 Installation Instructions Application: 2005-07 Ford F150 SuperCab and SuperCrew with or without the following Roush accessories:
More informationTMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product
Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance
More informationDUO-TONE NXT. A well-designed conversation starter for your business flight. Sports dual colour blocks for a contemporary look.
02 DUO-TONE NXT A well-designed conversation starter for your business flight. Sports dual colour blocks for a contemporary look. Material: Polycarbonate robust and lightweight TSA lock Smooth rolling
More informationIndex. A. Introduction 1. What is CARA? 2. Car Remarketing Association Europe Objectives
Index A. Introduction 1. What is CARA? 2. Car Remarketing Association Europe Objectives B. Return conditions 1. Docs 2. Equipment 3. Maintenance 4. Tidiness C. Fair wear and tear guidelines 1.0 Is it usual
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationReplace - A - Top Installation Instructions
Replace - A - Top Installation Instructions For: Suzuki Samurai Part Number: 51361 Congratulations on your purchasing decision. Bestop designed this Convertible Top to give you years of dependability and
More informationMass Tank Inspection Services, LLC 29 Abbey Lane Middleboro, MA masstankinspection.com
June 18, 2018 Mrs. Nancy Cole Administrator Village of Eidelweiss 1680 Conway RD Madison, NH 03849 Mass Tank Inspection Services, LLC 29 Abbey Lane Middleboro, MA 02346 508-947-8826 masstankinspection.com
More informationBLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection
More informationQB/T Translated English of Chinese Standard: QB/T
Translated English of Chinese Standard: QB/T2858-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL LIGHT INDUSTRY STANDARD QB OF THE PEOPLE S REPUBLIC OF CHINA ICS 97 180 Y 50 Reference No.
More informationGOOD CONDITION GUIDE SHOGUN
GOOD CONDITION GUIDE THE AIM OF THIS GUIDE At the end of your agreement you may choose to return your vehicle. You must keep the vehicle in good condition allowing for fair wear and tear. This guide explains
More informationTest Report No.: SZTY TS Date: DEC 04, 2012 Page 1 of 10
Test Report : SZTY1211030991TS Date: DEC 04, 2012 Page 1 of 10 HAPPY ARTS&CRAFTS(NINGBO)CO.,LTD/ HAPE INTERNATIONAL(NINGBO)LTD 9-27 NANHAI ROAD, DAGANG INDUSTRIAL CITY, BEILUN, NINGBO, CHINA PC:315800
More informationConvertible Top Installation Instructions
Convertible Top Installation Instructions For: 1995-1998 Geo Tracker & Suzuki Sidekick Part Number: 51364 Parts List Top, Soft (1) Window (1) Quater Window, Rt. (1) Quarter Window, Lt. (1) WARNING This
More informationMetal package testing
Metal package testing Gauges for dimensional measurement, and testers for package integrity and failure analysis. Manual and semiautomatic solutions for ensuring quality in food, beverage, and aerosol
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationGOOD CONDITION GUIDE. Suzuki Financial Services
GOOD CONDITION GUIDE THE AIM OF THIS GUIDE At the end of your agreement you may choose to return your vehicle. To avoid end of contract charges you must keep the vehicle in good condition allowing for
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationOPERATING INSTRUCTIONS. TempCheck Non-Contact Infrared Thermometer IRT200 F C + -
OPERATING INSTRUCTIONS TempCheck Non-Contact Infrared Thermometer IRT200 1 8 2 4 5 7 6 3 F C 00.0 SCAN + - Figure 1 MAX HOLD E= Figure 3 0.00 Figure 2 NUMBER DESCRIPTION NUMBER DESCRIPTION 1 Laser 5 C
More informationCertified Automotive Parts Association. Vehicle Test Fit Report. Report Number: HN-04060BBQ/COM VTF CAR Refit/ Tong Yang Industry Co.
Certified Automotive Parts Association Vehicle Test Fit Report Report Number: HN-04060BBQ/COM VTF CAR Refit/20140612 Tong Yang Industry Co., Ltd Mfr. Part Number: HN-04060BBQ Complaint Vehicle Test Fit
More informationLikorall. LOAD TESTING 12 Mechanical lowering load test (242) Maximum load rail system... DOCUMENTATION 14 Instructions / Instruction guide...
6.1 Likorall 200, 240, 242, 243, 250 Periodic inspection 24-06-26 Lift type:... Prod No:... Version: Serial No:... Prod. Year:... Customer Reference: Contract No:... Name:... Address:... (Zip Code)...
More informationXTREME Protocol for Speaker
Page 1 of 8 Test Items Testing Requirement / Limit Supplemental Protocol **AC adaptor test XTM-EA004(US) Require if the product sold with an AC adaptor. Document Check 1. Labelling F.P. & L. Act (16 CFR
More informationGOOD CONDITION GUIDE THE AIM OF THIS GUIDE FINANCIAL SERVICES
GOOD CONDITION GUIDE THE AIM OF THIS GUIDE At the end of your agreement you may choose to return your vehicle. You must keep the vehicle in good condition allowing for fair wear and tear. This guide explains
More informationUSER MANUAL Please read and understand this user manual carefully before each use. Model: X-10
USER MANUAL Please read and understand this user manual carefully before each use. Model: X-10 This model is designed as an external battery pack to recharge your 5V and 12V electronic devices, and as
More informationAMY SAYS: Drop Forged Pear Link. Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. Anatomy of an
AMY SAYS: Drop Forged Pear Link Eyes are tapered and an eye buffer is sewn in the eye for better fit and wear. AMY Anatomy of an V Sling Full two-ply web bodies which allow for only one splice. (no edge
More informationBHG Amsterdam 5 piece cushion dining set, chair
BHG Amsterdam 5 piece cushion dining set, chair Style #: BH16-092-39938T Lot Number: Date Purchased: THIS SET-UP GUIDE CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
More informationRANGE BELT OPERATOR S MANUAL
RANGE BELT OPERATOR S MANUAL CONTENTS EQUIPMENT INFORMATION INTRODUCTION...1 INCLUDED COMPONENTS...2 DONNING THE LRB PANT BELT CONFIGURATION... 5 BUCKLE REMOVAL...7 MRB OUTER BELT CONFIGURATION... 9 DUTY
More informationOpen Frame Gas/Diesel Engine Driven Rotary Screw Compressor. Installation Guide
Open Frame Gas/Diesel Engine Driven Rotary Screw Compressor Installation Guide Air compressors should only be installed trained installation personnel call 800-531-9656 to find a local trained. Warning:
More informationSportsplay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO (314) CTN 3 BDL 3 WF 8 TOTAL PCS WT 160# CLASS 70
Page 1 * IMPORTANT * PLEASE RETAIN THIS INSTRUCTION SHEET IN YOUR FILES. IT CONTAINS IMPORTANT REPLACEMENT PARTS INFORMATION. ALL EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS. IT
More informationNurse Tank Inspection Report Instructions
SAMPLE Nurse Tank Inspection Report Instructions Locate the Worksheet provided in each NTIP Inspection Kit and record the data from your test/inspections using the following instructions. Insert an X
More informationPROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE
PROCUREMENT SPECIFICATION NUMBER PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED REFERENCE UNLESS OTHERWISE STAMPED IN RED INK. PROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE Authorizing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationYour safety and the safety of others are very important.
quick start guide SWASH System Safety Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T25978-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 04 GB/T 25978-2010 Road vehicles
More informationLoad Securing at Mohn Media Mohndruck GmbH
EXTERN Last updated: 1.2018 Guideline Load Securing at Mohn Media Mohndruck GmbH Content 2 Preface Scope Legal foundations 3 Vehicle requirements General vehicle requirements Securing Material Truck condition
More informationOverhead transmission lines Tension clamp
SVENSKA KRAFTNÄT T~ SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AFL, Asset Management Lines OUR REFERENCE TR05-06E DATE 2016-06-09 CONSULTÅTIONS m /j(j TECHNICAL GUIDELINE REVISION 3 Td APPROVED Overhead
More informationBENNETT CNG DISPENSER MAINTENANCE SCHEDULE
BENNETT CNG DISPENSER MAINTENANCE SCHEDULE Serial #: DIN #: Company Name: CAUTION: Only trained personnel may work on dispensers. CAUTION: The emergency shut off valve if installed must be closed. CAUTION:
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More informationRAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels
RW 2518 Revision 1 Page 1 of 9 Date Printed 15-Apr-08 Tyco Electronics Cheney Manor, Swindon. UK RW 2518 Revision 1 RAYMARK LABELS SCOPE This Quality Assurance Specification establishes the quality standard
More informationA SIMPLIFIED TEST PROCEDURES FOR KNAPSACK (OPERATOR- CARRIED) SPRAYERS CHAN CHEE WAN
A SIMPLIFIED TEST PROCEDURES FOR KNAPSACK (OPERATOR- CARRIED) SPRAYERS CHAN CHEE WAN CONTENTS I. INTRODUCTION II. ANTAM (ESCAP -CSAM) APPROVED STATUS III. GUIDELINES ON STANDARDS AND TEST PROCEDURES IV.
More informationWear & Tear Guide Leased vehicle return guidelines and instructions
Wear & Tear Guide Leased vehicle return guidelines and instructions Annex 7 Version 1.2 Sign: Index Introduction 4 The driver s obligations 5 Checklist 6 Reading through this guide will let you know how
More informationCode Requirements for ASTs at Motor Vehicle-Dispensing Stations
Code Requirements for ASTs at Motor Vehicle-Dispensing Stations This table compares aboveground storage tank requirements in the 2015 edition of, to the 2015 International Fire Code (). Please note that
More informationHERCULES II. Sportsplay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO (314)
Page 1 * IMPORTANT * PLEASE RETAIN THIS INSTRUCTION SHEET IN YOUR FILES. IT CONTAINS IMPORTANT REPLACEMENT PARTS INFORMATION. ALL EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS. IT
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
More informationNovitaTech Engineering
NovitaTech Engineering 490869 TEST REPORT FOR PDG Product Design Group Eclipse 600 MANUAL WHEELCHAIR TEST DOCUMENTS AS3695:1992, AS3696-1:1990, AS 3696-3:1990, AS 3696-5:1989, AS 3696-8:1998, ISO 7176-7:1996
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
More information# I: Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage - (Feb 12, 2016)
Page 1 of 5 Document ID: 4390397 #02-08-42-001I: Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage - (Feb 12, 2016) Subject: Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage Models:
More informationLi-ion Button Rechargeable Battery Specification
7 Customer: Li-ion Button Rechargeable Battery Specification MODEL: LIR2450 Prepared By/Date Checked By/Date Approved By/Date Customer confirmation Date History of revisions Edition Description Prepared
More information