AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012)
|
|
- Godfrey Hudson
- 6 years ago
- Views:
Transcription
1 AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012) AUMT 1319: AUTOMOTIVE ENGINE REPAIR SEMESTER HOURS: 3 TEXTBOOK Chek-Chart: Automotive Engine Repair And Rebuilding COURSE DESCRIPTION; Fundamentals of engine operation, diagnosis and repair including lubrication and cooling systems. Emphasis on overhaul of selected engines, identification and inspection, measurements, and disassembly, repair, and reassembly of the engine. COURSE LEARNING OUTCOMES; Utilizing appropriate safety procedures, the student will demonstrate engine diagnostic procedures. The student will perform cylinder head valve train, engine block, and lubrication and cooling systems diagnosis and repair. PERFORMANCE OBJECTIVES; By the end of the course, the student will develop entry level skills and knowledge necessary to perform the following tasks. 1. Demonstrate knowledge of correct safety procedures in the automotive lab in accordance with shop safety and dress code standards. 2. Demonstrate knowledge of proper procedures involving the operation and cleaning of the automotive lab and tool room according to the standards of the instructor and the Industrial Division. 3. Acquire acceptable work skills and attitudes according to Industrial Division standards which will increase the students chances of securing gainful employment in the field. 4. Identify all hand and power tools used by craftsmen of the field that are needed to properly perform repairs on automotive and light duty diesel engines using shop manual procedures. 5. Accurately describe the gasoline and light duty diesel four stroke cycle and correctly relate each stroke's function. 6. Identify, diagnose, and accurately repair problems in the crank, rod, and piston assembly of gasoline and light duty diesel engines using shop manual procedures, manufacturer's specifications, and allowable tolerances. 1
2 7. Identify and accurately implement automotive nomenclature and trade terms that are used by automotive manufacturers and craftsmen in the field. 8. Show the ability to accurately solve mathematical problems in the automotive trade that are encountered by craftsmen in the field. 9. Accurately measure tolerances to compare with manufacturer's recommended specifications using various measuring devices. 10. Properly road test an automobile according to the standard set forth by the instructor. COURSE OUTLINE: Automotive Engines I. Engine Construction II. Engine Classification A. Operational Cycles 1. Four- stroke cycle 2. Two-stroke cycle B. Number of Cylinders C. Cylinder Arrangement D. Valve Train Type 1. OHC 2. OHV 3. DOHV E. Ignition Type F. Cooling System Type G. Fuel type III. Four-Stroke Gasoline Engines A. Intake Stroke B. Compression Stroke C. Power Stroke D. Exhaust Stroke IV. Two-Stroke Gasoline Engines V. Characteristics of Four-Stroke Engines A. In-Line Engines B. V-Type Engines C. Slant Cylinder Engines D. Opposed Cylinder Engines E. Valve and Camshaft Placement 1. Overhead valve 2. Overhead cam F. Valve Arrangement G. Valve and Camshaft Operation H. Engine Location 1. Front engine longitudinal 2. Front engine traverse 3. Mid-engine transverse 2
3 4. Rear engine VI. Gasoline Engine Systems A. Air/Fuel Systems B. Ignition Systems C. Lubrication Systems D. Cooling Systems E. Exhaust Systems F. Emission Control Systems VII. Engine Measurement and Performance A. Bore and Stroke B. Displacement C. Compression Ratio D. Engine Efficiency E. Torque and Horsepower VIII. Engine Identification IX. Engine Diagnosis A. Engine Temperature Tests B. Oil Pressure testing X. Evaluating the Engine s Condition A. Noise Diagnosis 1. Using a stethoscope 2. Common noises a. Ring noise b. Piston slap c. Piston pin knock d. Ridge noise e. Rod-bearing noise f. Main or thrust bearing noise g. Tappet noise h. Abnormal combustion noise XI. Other Engine Designs A. Diesel Engine B. Rotary Engine C. Stratified Charge Engine D. Miller-Cycle Engine E. Electric Engine H. Hybrid Vehicles Engine Disassembly I. Preparing the Engine for Removal II. Lifting an Engine III. Engine Disassembly and Inspection A. Cylinder Head Removal B. Cylinder Head Disassembly C. Cylinder Block Disassembly IV. Cleaning Engine Parts A. Types of Soil Contaminants 1. Water-soluble soils 3
4 2. Organic soils a. Petroleum byproducts b. Combustion byproducts c. Coatings 3. Rust 4. Scale B. Cleaning with Chemicals 1. Parts washers 2. Soak tanks 3. Hot spray tanks C. Thermal Cleaning D. Abrasive Cleaners 1. Abrasive blaster 2. Parts tumbler 3. Vibratory cleaning 4. Cleaning by hand E. Alternative Cleaning Methods 1. Ultrasonic cleaning 2. Citrus chemicals 3. Salt bath V. Crack Repair A. Crack Detection Methods B. Furnace Welding Crack Repairs C. Repairing Aluminum Heads 1. Cracks in the aluminum between the valve seat rings 2. Cracks coming from the cooling passages 3. Cracks across the main oil gallery 4. Detonation damage 5. Meltdown damage 6. Coolant-related metal erosion Short Block I. Cylinder Blocks A. Lubricating and Cooling B. Core Plugs C. Cylinder Sleeves II. Cylinder Block Reconditioning A. Deck Flatness B. Cylinder Walls C. Cylinder Bore Inspection 1. Taper 2. Out of roundness D. Cylinder bore Surface Finish 1. Cylinder deglazing 2. Cylinder boring 3. Cylinder honing E. Installing core Plugs 1. Disc- or dished- type 2. Cup-type 4
5 3. Expansion type III. Crankshaft A. Vibration dampner B. Flywheel C. Balance shafts IV. Crankshaft Inspection and Rebuilding A. Checking Crankshaft Saddle Alignment B. Checking Crankshaft Straightness C. Checking Crankshaft Clearance and End Play D. Flywheel Inspection E. Crankshaft Bearings F. Bearing Spread G. Bearing Crush H. Bearing Locating groves I. Oil Grooves J. Oil Holes K. Oil Clearance L. Bearing failure and Inspection V. Installing Main Bearings and Crankshaft A. Plastigauge B. Crankshaft End Play C. Connecting Rod VI. Pistons and Piston Rings A. Pistons 1. Head or dome 2. Ring lands 3. Piston pin B. Piston Rings 1. Compression rings 2. Oil control rings VII. Installing Pistons and Connecting Rods Cylinder heads and valves I. Cylinder head II. Combustion Chamber A. Wedge chamber B. Hemispherical chamber C. Swirl chamber D. Chamber-in-piston E. Fast-burn combustion chamber III. Intake and exhaust valves A. Poppet Design B. Vavle Face C. Margin D. Valve Guides E. Valve Springs, Retainers, and Seals F. Valve Rotaters G. Multi-valve engines 5
6 IV. Aluminum Cylinder Heads A. Reconditioning Aluminum Cylinder Heads V. Resurfacing Cylinder Heads A. Surface Finish B. Belt Finishers C. Milling Machines D. Broaching Machines E. Surface Grinders F. Stock Removal Guidelines 1. Combustion chamber volumes a. Compression ratio b. Piston/valve interference and misalignment VI. Grinding Valves VII. Valve Guide Reconditioning A. Knurling B. Reaming and Oversize Valves C. Thin-walled Guide Liners D. Valve Guide Replacement 1. Integral guides 2. Insert guides VIII. Reconditioning Valve Seats A. Installing Valve Seat Inserts B. Reconditioning Integral Seats C. Grinding Valve Seats D. Cutting Valve Seats E. Machining Valve Seats IX. Valve Stems Seals A. Installing Positive Valve Seals B. Installing Umbrella-Type Valve seals C. Installing O-Rings D. Valve Spring 1. Freestanding height test 2. Spring squareness test 3. Open/close spring pressure test E. valve Spring Rotaters and Keepers 1. Valve rotaters X. Assembling the Cylinder Head Camshaft and Valve Trains I. Camshaft A. Camshaft bearings B. Valve lifters 1. Operation of hydraulic lifters C. Pushrods D. Pushrod Guide Plates E. Rocker Arms E. Timing Mechanism 1. Gear drive 2. Chain drive 7
7 3. Belt drive 4. Timing belt and chain tensioners 5. Timing marks 6. Auxiliary camshaft functions F. Variable Valve Timing II. Camshaft and Valve Train Inspection A. camshaft B. Valve Lifters C. Pushrods D. Rocker Arms E. Timing Components 1. Timing gear backlash 2. Timing belt 3. Camshaft/crankshaft timing III. Installing the Camshaft A. Camshaft End Play IV. Installing the Cylinder Head and Valve train A. Adjusting Valves B. valve Lash V. Installing the Timing Components LUBRICATING AND COOLING SYSTEMS I. Lubrication A. Oil Types B. Oil Consumption II. Lubricating Systems A. Oil Pumps B. Oil Pump Pickup C. Oil Pan or Sump D. Pressure Relief Valve E. Oil Filter F. Engine Oil Passages or Galleries G. Engine Bearings H. Oil Pressure Indicator I. Oil Seals and Gaskets J. Dipstick K. Oil Cooler III. Oil Pump A. Types of Oil Pumps 1. Rotor types 2. Gear type B. Pressure regulation C. Measuring Oil Pressure D. Oil Pressure Indicators E. Oil Filters IV. Oil Pump Inspection and Service V. Installing the Oil Pump VI. Cooling Systems A. Liquid Cooled System 8
8 1. Coolant a. Expansion or recovery tank 2. Water pump 3. Radiator 4. Radiator pressure caps 5. Water outlet 6. Hoses 7. Thermostat 8. Belt drives 9. Fans and fan clutches 10. Water jackets 11. Temperature indicator 12. Heater system 13. Oil cooler B. Air-Cooled system VII. Cooling System Testing A. Testing the Cooling System for Leaks B. Repairing Radiators C. Testing the Radiator Cap D. Testing the Thermostat E. Checking and Replacing Hoses F. Water Pump Service G. Checking Fans and Fan Clutches H. Checking Belts I. Flushing Cooling Systems J. Refilling and Bleeding INTAKE AND EXHAUST SYSTEMS I. Air Induction System A. Air Intake Ductwork 1. Air cleaner/filter a. Air filter design b. Air filter service c. Thermostatic air cleaners 2. Intake manifold a. Servicing an intake manifold B. Vacuum Systems 1. Vacuum basics 2. Vacuum controls 3. Vacuum schematic 4. Diagnosis and troubleshooting 5. Vacuum test equipment II. Exhaust System components A. Exhaust Manifold B. Exhaust Pipe and Seal C. Catalytic Converters D. Mufflers E. Resonator F. Tail pipe 9
9 G. Heat Shields H. Clamps, Brackets, and Hangers III. Exhaust System service A. Exhaust System Inspection B. Exhaust Restriction Test C. Exhaust Manifold and Exhaust Pipe Servicing D. Replacing Exhaust System Components 1. Replacing leaking gaskets and seals IV. Turbochargers and Superchargers A. Turbocharger Operation 1. Turbocharger system 2. Waste gate valve 3. Intercooler 4. Lubricating system 5. Spark-retard system 6. Computer-controlled systems B. Turbocharger Inspection C. Waste Gate Service D. Common Turbocharger Problems 1. Turbo-lag 2. Replacing turbocharger E. Turbo Start-up and Shutdown F. Superchargers 1. Supercharger operation 2. Supercharger design a. Roots b. G-Lader 3. Supercharger problems ENGINE SEALING AND REASSEMBLY I. Torque Principles A. Elasticity B. TTY C. Thread Repair II. Gaskets A. Gasket Material B. General Gasket Installation Procedures C. Cylinder Head Gaskets 1. Bimetal engine requirements D. Manifold Gaskets E. Valve Cover Gaskets F. Oil Pan Gaskets III. Adhesives, Sealants, and Other Chemical Sealing Materials A. Adhesives B. Sealants 1. General- purpose sealants 2. Flexible sealants] 3. Silicone formed-in-place sealants 4. Anaerobic formed-in-place sealants 10
10 5. Antiseize compounds IV. Oil Seals A. Timing Cover Oil Seals B. Rear Main Bearing Seals C. Other Seals V. Engine Reassembly A. Install Timing Cover B. Install the Vibration Damper C. Install the Valve Cover D. Pre-lubrication Check E. Install the Oil Pan F. Install the Intake Manifold G. Install the Thermostat and Water Outlet Housing H. Install the Fuel Pump I. Paint the Engine J. Spin Test the Engine K. Install the Exhaust Manifold L. Install Flywheel or Flex Plate M. Install Clutch Parts N. Install Torque Converter O. Install Motor Mounts VI. Installing the Engine A. Starting Procedure 1. Break-in Procedure TEACHING METHODS: 1. Lecture 2. Discussion 3. Audio Visual Aids 4. Hand Outs 5. Hands On (Lab) EVALUATION METHODS; 1. Written Exams 2. Classroom Participation 3. Lab Work 4. Safety Practices GRADING PROCEDURES: 1. Classroom (Test and Participation) 20% 2. Lab Project Completion and Safety 50% 3. Final Exam 30% ATTENDANCE POLICY: Fall and Spring Semesters: ONE letter grade will be lost for each TWO absences Summer Semester: ONE letter Grade will be lost for EACH absence REFERENCE MATERIAL: 11
11 1. Automotive Technology 2. College Library 3. Shop Publications 4. LAC (Learning Assistance Center) 5. Equipment operating manuals 6. Manufactures' Service Manuals 12
Metropolitan Community College COURSE OUTLINE FORM
COURSE TITLE: ENGINE MECHANICAL SERVICE COURSE PREFIX AND NO. AUTT 1710 LEC 3.0 LAB 9.0 CREDIT HOURS 6.0 COURSE DESCRIPTION: This course covers the diagnosis and repair of upper engine components. The
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT151 AUTOMOTIVE ENGINE REPAIR. 1 Credit Hour. Prepared by: Gerard Uhls
JEFFERSON COLLEGE COURSE SYLLABUS AUT151 AUTOMOTIVE ENGINE REPAIR 1 Credit Hour Prepared by: Gerard Uhls Revised by: Gerard Uhls Date: October 24, 2013 Date: February 10, 2014 Date: September 16, 2016
More informationCOASTAL BEND COLLEGE AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012)
COASTAL BEND COLLEGE AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012) AUMT 1310: Automotive Brake Systems SEMESTER HOURS: 3 TEXTBOOK Automotive Technology A systems Approach COURSE DESCRIPTION; Operation
More information9/30/2018 8:48 AM Approved (Changed Course) AUTO 151 Course Outline as of Fall 2018
9/30/2018 8:48 AM Approved (Changed Course) AUTO 151 Course Outline as of Fall 2018 CATALOG INFORMATION Dept and Nbr: AUTO 151 Full Title: Automotive Engines Last Reviewed: 11/27/2017 Title: AUTOMOTIVE
More informationAUTOMOTIVE TECHNOLOGY 41 COURSE SYLLABUS
AUTOMOTIVE TECHNOLOGY 41 COURSE SYLLABUS Course Description: Recommended: AT1 or pass the Auto Tech 1 Placement Test. Principles of engine rebuilding, includes diagnosis, removing, disassembly, cleaning,
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT162 INTRODUCTION TO ENGINE PERFORMANCE LAB. 3 Credit Hours. Prepared by: Gerard Uhls and Gary Boyher
JEFFERSON COLLEGE COURSE SYLLABUS AUT162 INTRODUCTION TO ENGINE PERFORMANCE LAB 3 Credit Hours Prepared by: Gerard Uhls and Gary Boyher Revised by: Gerard Uhls and Gary Boyher Date: October 24, 2013 Date:
More informationDIESEL ENGINE SPECIALIZATION Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 DIESEL ENGINE SPECIALIZATION Course Syllabus Course Number: TRUK-0166 OHLAP Credit: No OCAS Code: None Course Length: 165 Hours Career Cluster:
More informationDiesel Technology: Engines
Diesel Technology: Engines NATEF Crosswalk The following NATEF Diesel Engines tasks (rev. 2004) are covered in this publication. The chart shows where each task is located within the publication. The first
More informationNZQA unit standard version 5 Page 1 of 6. Demonstrate knowledge of engine design factors and machining practices
Page 1 of 6 Title Demonstrate knowledge of engine design factors and machining practices Level 4 Credits 20 Purpose People credited with this unit standard are able to demonstrate knowledge of engine design
More information1998 Saab 900 SE ENGINES Saab 2.0L & 2.3L 4-Cylinder
Removal & Installation See VALVE SPRINGS under CYLINDER HEAD under OVERHAUL. CAMSHAFT Removal 1. Rotate crankshaft until "0" mark on flywheel aligns with timing mark on flywheel cover. Remove inspection
More informationFUNDAMENTALS OF AUTOMOTIVE SERVICE (NATEF aligned) Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 FUNDAMENTALS OF AUTOMOTIVE SERVICE (NATEF aligned) Course Syllabus Course Number: ATOS-1609 OHLAP Credit: No OCAS Code: None Course Length: 45
More informationJEFFERSON COLLEGE COURSE SYLLABUS
JEFFERSON COLLEGE COURSE SYLLABUS AUT101 POWER PLANTS 9 Credit Hours Prepared by Richard Slinkard Revision Date: April 2004 by Gerard Uhls CAREER & TECHNICAL EDUCATION Alan C. Foster, Associate Dean AUT101
More informationDEM241 Advanced Diesel Engines
DEM241 Advanced Diesel Engines Course Information Credits 5 Campus Washburn Institute of Technology Address 5724 SW Huntoon City/State/Zip Topeka, Kansas 66604 Office Fax 785-273-7080 Description Advanced
More informationFig. 6: Assembling Piston & Rod. NOTE: Notch must face forward Toyota Starlet CRANKSHAFT MAIN BEARINGS
connecting rods are marked for reassembly. 3. Thoroughly clean and inspect all components. Coat pin with engine oil and heat piston to 158-176 F (70-80 C). Pin should push fit with thumb pressure through
More informationREDESIGNED MODULES FOR THE SECTOR AUTOMOBILE UNDER MODULAR EMPLOYABLE SKILLS (MES)
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOBILE UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of Labour & Employment
More information122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
More information1.8L & 2.2L 4-CYL Article Text 1998 Subaru Impreza
1.8L & 2.2L 4-CYL Article Text 1998 Subaru Impreza ARTICLE BEGINNING 1995-98 ENGINES Subaru - 1.8L & 2.2L 4-Cylinder 1995-97: Impreza (1.8L) 1995-98: Impreza (2.2L), Legacy (2.2L) * PLEASE READ THIS FIRST
More informationAutomotive & Diesel Technology
AUTO 133 Automotive Suspension/Steering (3.5 credit, 2 lecture, 3 lab) Instruction in skills needed to diagnose, service, and repair modern automotive suspension/steering systems. Suspension/steering designs,
More informationLONG BEACH CITY COLLEGE AUTO MECHANICS 233 AUTOMOTIVE ELECTRICAL & FUEL SYSTEMS SPRING 2005
LONG BEACH CITY COLLEGE AUTO MECHANICS 233 AUTOMOTIVE ELECTRICAL & FUEL SYSTEMS SPRING 2005 SUBJECT MATTER AREA Automotive Technology COURSE NUMBER AMECH 233 SECTION NUMBER 31377 ROOM # MM128A/MM130 COURSE
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT 211 ADVANCED ENGINE PERFORMANCE. 2 Credit Hours. Prepared by: Gary Boyher Date: February 10, 2014
JEFFERSON COLLEGE COURSE SYLLABUS AUT 211 ADVANCED ENGINE PERFORMANCE 2 Credit Hours Prepared by: Gary Boyher Date: February 10, 2014 Revised by: Brad Berrey Date: September, 26 2016 Chris DeGeare, M.Ed.,
More informationDEM231 Diesel Engines I
DEM231 Diesel Engines I Course Information Credits 5 Campus Washburn Institute of Technology Address 5724 SW Huntoon City/State/Zip Topeka, Kansas 66604 Office Fax 785-273-7080 Description Diesel Engines
More informationMISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE
MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE 1. Course Title: Basic Car Care 2. CBEDS Title: Automotive Mechanics 3. CBEDS Number: 5655 4. Job Titles/DOT
More informationBe Certain to Read the Summary. ATASA 5 th Study Guide Chapter 10 Pages Engine Cleaning, Removal & Disassembly. 27 Points
Study Guide Chapter 10 Pages 255 274 27 Points Be Certain to Read the Summary Is there a career for me that melds 2 or more of my favorite clusters? 1. Major engine repair or overhaul will require from
More informationSmall Engines I PRECISION EXAMS DESCRIPTION. EXAM INFORMATION Items
PRECISION EXAMS Small Engines I EXAM INFORMATION Items 49 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION This is a course that prepared individuals to apply technical
More information1.6L 4-CYL - VIN [E]
1.6L 4-CYL - VIN [E] 1993 Nissan Sentra 1993 NISSAN ENGINES 1.6L 4-Cylinder NX, Sentra * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES
More informationModern Auto Tech Study Guide Chapter 11 Pages Engine Fundamentals 62 Points
Modern Auto Tech Study Guide Chapter 11 Pages 145-161 Engine Fundamentals 62 Points 1. The is the area between the top of the piston & the cylinder head. Combustion Chamber Cylinder Chamber Chamber of
More informationTM T.O. 38G
T.O. 38G1-48-12-2-1 TECHNICAL MANUAL VOLUME 2 OF 2 PART 1 OF 2 MAINTENANCE DIRECT SUPPORT AND GENERAL SUPPORT LEVEL ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED,
More informationSCHOOLS OF AUTOMOTIVE TECHNOLOGY 3/2010 AUTOMOTIVE TECHNOLOGY II
I. COUSE DESCRIPTION SCHOOLS OF AUTOMOTIVE TECHNOLOGY 3/2010 AUTOMOTIVE TECHNOLOGY II This course will provide a sound educational building foundation for the students with a strong interest in the automotive
More informationCourse Information Course Number: AMT 1003 Course Name: Automotive Foundations
Course Information Course Number: AMT 1003 Course Name: Automotive Foundations Credit-By-Assessment (CBA) Competency List Written Assessment Competency List Electrical Describe the effects of temperature,
More informationAl-Balqa Applied University
تا سست عام 997 Specialization Common Course Number 202073 Course Title Internal Combustion Engines Credit Hours 3 Theoretical Hours 3 Practical Hours 0 صفحة () من (0) تا سست عام 997 Brief Course Description:
More informationV/VT-378, V/VT-504, and V/VT-555 Engines
V/VT-378, V/VT-504, and V/VT-555 Engines Service Manual Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CUMMINS OR IT S SUCCESSORS. CUMMINS AND IT S SUCCESSORS ARE
More informationTECHNICAL MANUAL OPERATOR S, UNIT, INTERMEDIATE (DS) AND INTERMEDIATE (GS) MAINTENANCE MANUAL FOR
TM 5-2815-232-14 TECHNICAL MANUAL OPERATOR S, UNIT, INTERMEDIATE (DS) AND INTERMEDIATE (GS) MAINTENANCE MANUAL FOR ENGINE, DIESEL, CATERPILLAR, MODEL 3508 NSN 2815-01-216-0938 HEADQUARTERS, DEPARTMENT
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) When preparing for a compression test, technician A disables the ignition system. Technician
More information1983 BMW 320i. 1.8L 4-CYL 1983 Engines - 1.8L 4-Cylinder Engines - 1.8L 4-Cylinder
ENGINE IDENTIFICATION 1.8L 4-CYL 1983 Engines - 1.8L 4-Cylinder For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION article in the GENERAL INFORMATION
More informationKnowledge of diagnosis and rectification of light vehicle engine faults
Unit 157 Knowledge of diagnosis and rectification of light vehicle engine faults UAN: F/601/3733 Level: No Level Credit value: 6 GLH: 45 Relationship to NOS: This unit is linked to LV07 Diagnose and Rectify
More informationKnowledge of Diagnosis and Rectification of Light Vehicle Engine Faults
Unit 157 Knowledge of Diagnosis and Rectification of Light Vehicle Engine Faults UAN: F/601/3733 Level: Level 3 Credit value: 6 GLH: 45 Relationship to NOS: This unit is linked to LV07 Diagnose and Rectify
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Lower End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Lower End Theory & Service To make work easier, one of the first steps often done before engine removal is to clean & degrease the engine compartment.
More informationAUT 163 AUTOMOTIVE FUNDAMENTALS SYLLABUS
Instructor: Office: Jeremy Akin AUT 163 AUTOMOTIVE FUNDAMENTALS SYLLABUS Automotive office in Career -Tech Bldg. Phone: 989-275-5000 Ext. 356 Email: Jeremy.Akin@kirtland.edu Required Text: Modern Automotive
More informationPerkins Peregrine EDi and 1300 Series EDi Models WK to WS
Perkins Peregrine EDi and 300 Series EDi Models WK to WS WORKSHOP MANUAL Peregrine 6 cylinder turbocharged diesel engines with electronic management system for automotive applications 300 Series 6 cylinder
More informationCH. 48 ENGINE MECHANICAL PROBLEMS TEST
TERRY FOX AUTOMOTIVE CH. 48 ENGINE MECHANICAL PROBLEMS TEST WHEN YOU ARE DONE THIS TEST GUESS WHAT YOU THINK YOU WILL RECEIVE FOR A MARK BELOW. IF YOU ARE WITHIN 2 MARKS YOU WILL RECEIVE 2 BONUS MARKS.
More information3304 Engine S/n 43V, 46V, 48V, 78P, 9Z, 7Z & 12Z
Caterpillar Service Manual 3304 Engine S/n 43V, 46V, 48V, 78P, 9Z, 7Z & 12Z Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationAPPLIED MECHANICS 40/50
APPLIED MECHANICS 40/50 Description (Combined Course- 2 periods) Applied Mechanics 40 introduces students to automobile servicing and the maintenance/repair field. Work is performed on operational vehicles.
More informationSMALL ENGINES I (501)
DESCRIPTION This is a course that prepared individuals to apply technical knowledge and skill to maintain and repair small internal-combustion engines used on portable power equipment, such as lawn and
More informationCOMPONENT LOCATOR > DISASSEMBLED VIEWS
Page 1 of 45 2006 Pontiac Grand Prix 3.8L Eng Base Service Manual: ENGINE MECHANICAL - 3.8L COMPONENT LOCATOR > DISASSEMBLED VIEWS Fig 1: Engine Block Component Views Callout Component Name 100 Engine
More informationDEM241 Advanced Diesel Engines
DEM241 Advanced Diesel Engines Course Information Credits 5 Campus Washburn Institute of Technology Address 5724 SW Huntoon City/State/Zip Topeka, Kansas 66604 Office Fax 785-273-7080 Description Advanced
More information2.4L 4-CYL - VINS [F,H,S]
2.4L 4-CYL - VINS [F,H,S] 1990 Nissan 240SX 1990 ENGINES Nissan 2.4L 4-Cylinder Axxess, Pickup, Stanza, 240SX * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article,
More information2.0L 4-CYL & 2.0L 4-CYL TURBO - VIN [S]
2.0L 4-CYL & 2.0L 4-CYL TURBO - VIN [S] 1988 Toyota Celica 1988 TOYOTA ENGINES 2.0L & 2.0L Turbo 4-Cylinder Celica * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article,
More information1999 Acura SLX. Fig. 6: Identifying Piston & Connecting Rod Size Courtesy of ISUZU MOTOR CO.
3. Check cylinder bore to determine piston-to-cylinder clearance. Clearance should be within specification. See PISTONS, PIN & RINGS table under ENGINE SPECIFICATIONS. Fig. 6: Identifying Piston & Connecting
More informationSECTION B Engine 5.0L (4V)
303-01B-i Engine 5.0L (4V) 303-01B-i SECTION 303-01B Engine 5.0L (4V) CONTENTS PAGE SPECIFICATIONS... 303-01B-2 303-01B-2 Engine 5.0L (4V) 303-01B-2 SPECIFICATIONS Material Motorcraft Metal Surface Prep
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT132 AUTOMOTIVE BRAKE SYSTEMS LAB. 4 Credit Hours. Prepared by: Gary Boyher and Gerard Uhls Date: November 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT132 AUTOMOTIVE BRAKE SYSTEMS LAB 4 Credit Hours Prepared by: Gary Boyher and Gerard Uhls Date: November 2011 Revised by: Gerard Uhls Date: September 12, 2016 Chris
More informationSECTION C Engine 5.4L (4V)
303-01C-i Engine 5.4L (4V) 303-01C-i SECTION 303-01C Engine 5.4L (4V) CONTENTS PAGE SPECIFICATIONS... 303-01C-2 303-01C-2 Engine 5.4L (4V) 303-01C-2 SPECIFICATIONS Material Motorcraft Metal Surface Prep
More informationDISASSEMBLED VIEWS. Disassembled Views. Engine Covers and Component Assemblies (1 of 2) (LF1, LFW or LFX)
2012 Cadillac CTS Wagon AWD V6-3.0L Vehicle > Engine, Cooling and Exhaust > Engine > Locations > Components DISASSEMBLED VIEWS Disassembled Views Engine Covers and Component Assemblies (1 of 2) (LF1, LFW
More informationSECTION C Engine 6.4L Diesel
303-01C-i Engine 6.4L Diesel 303-01C-i SECTION 303-01C Engine 6.4L Diesel CONTENTS PAGE SPECIFICATIONS... 303-01C-2 303-01C-2 Engine 6.4L Diesel 303-01C-2 SPECIFICATIONS Material Gasket Maker TA-16 Motorcraft
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT131 AUTOMOTIVE BRAKE SYSTEMS. 2 Credit Hours. Prepared by: Gerard Uhls Date: November 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT131 AUTOMOTIVE BRAKE SYSTEMS 2 Credit Hours Prepared by: Gerard Uhls Date: November 2011 Revised by: Gerard Uhls Date: September 12, 2016 Chris DeGeare, M.Ed., Division
More informationCYLINDER HEAD OVERHAUL
ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION -2011 Mercedes-... Page 1 of 20 CYLINDER HEAD OVERHAUL * PLEASE READ THIS FIRST * Examples used in this article are general in nature and do not necessarily
More informationMODEL NUMBER AND IDENTIFICATION. Pag. 5 CHARACTERISTICS CHARACTERISTIC POWER, TORQUE AND SPECIFIC CONSUMPTION CURVES
MODEL NUMBER AND IDENTIFICATION CHARACTERISTICS CHARACTERISTIC POWER, TORQUE AND SPECIFIC CONSUMPTION CURVES MAINTENANCE - RECOMMENDED OIL TYPE - REFILLING POSSIBLE CAUSES AND TROUBLE SHOOTING OVERALL
More informationAUTOMOTIVE TECHNOLOGY (AUTO)
Automotive Technology (AUTO) 1 AUTOMOTIVE TECHNOLOGY (AUTO) AUTO 100 Automotive Technology and Maintenance for the Consumer 3 Units (AA/AS; CSU) 54 lecture hours, 18 lab hours Intended for non-majors.
More informationENGINE 9-1 ENGINE CONTENTS
ZG ENGINE 9-1 ENGINE CONTENTS page GENERAL INFORMATION ENGINE IDENTIFICATION... 1 HYDRAULIC TAPPETS... 1 DIAGNOSIS AND TESTING SERVICE DIAGNOSIS DIESEL MECHANICAL.... 9 SERVICE DIAGNOSIS DIESEL PERFORMANCE...
More informationModern Auto Tech Study Guide Chapters 13 & 14 Pages Engine Construction 52 Points
Modern Auto Tech Study Guide Chapters 13 & 14 Pages 182-216 Engine Construction 52 Points Automotive Service 1. The engine top end includes the cylinder, valve cover and intake & exhaust. Head, Manifolds
More information1991 Volkswagen Vanagon Syncro
corner of radiator. See Fig. 1. Fig. 1: Bleeding Cooling System 2. Open bleeder valve in engine compartment (turn counterclockwise). See Fig. 1. Fill expansion tank until full. Start and run engine at
More information941 Traxcavator S/n 16U, 70H, 80H & up
Caterpillar Service Manual 941 Traxcavator S/n 16U, 70H, 80H & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND
More informationFORD V8 ENGINES 209. the treated area, the block is cracked and should be replaced.
FORD V8 ENGINES 209 Cylinder block Core plug Strike here with hammer Drift 8 the treated area, the block is cracked and should be replaced. 3. Check flatness of the cylinder block deck. Place an accurate
More informationAuto Service Technician
Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service
More information440 & 443 Skid Steer
Bobcat 440 & 443 Skid Steer THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF BOBCAT OR IT S SUCCESSORS. BOBCAT AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY
More informationWayne County Community College District
AUT 151 Light Duty Diesel Engines CREDIT HOURS: 4.00 CONTACT HOURS: 60.00 COURSE DESCRIPTION: This course covers the operation of light duty diesel engines. Students will diagnosis and repair mechanical
More informationEngine. Special Tool(s) Compressor, Piston Ring 303-D032 (D81L-6002-C) or equivalent. Compressor, Valve Spring (T93P-6565-AR)
SECTION 303-01C: Engine 5.4L (4V) 2009 Mustang Workshop Manual ASSEMBLY Procedure revision date: 12/12/2008 Engine Special Tool(s) Compressor, Piston Ring 303-D032 (D81L-6002-C) or equivalent Compressor,
More informationUNIT MAINTENANCE INSTRUCTIONS PAGE 2-1 DIRECT SUPPORT
TECHNICAL MANUAL TABLE OF CONTENTS PAGE i INTRODUCTION PAGE 1-1 UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL UNIT MAINTENANCE INSTRUCTIONS PAGE 2-1 DIRECT SUPPORT MAINTENANCE INSTRUCTIONS
More information6 cylinder turbocharged diesel engines for industrial applications
Perkins 2800 Models 2806C-E16 WORKSHOP MANUAL 6 cylinder turbocharged diesel engines for industrial applications Publication TSD3450E, Issue 1 Proprietary information of Perkins Engines Company Limited,
More informationEngine Design Classifications
Chapter 12 Engine Design Classifications Name: Date: Instructor: Score: Textbook pages 158-175 Objective: After studying this chapter, you will be able to describe and explain basic automotive engine designs
More informationValve Timing Inspection and Adjustment
Document ID: 2094866 http://localhost:9001/si/showdoc.do?docsyskey=2094866&pubcellsyskey=123728&pubo... Page 1 of 3 2009 Chevrolet Aveo Aveo, Wave, G3, Barina (VIN S/T) Service Manual Engine Engine Mechanical
More informationLubrication & Cooling Systems
Study Guide Chapter 14 Pages 393 432 44 Points 1. The life span of an engine depends largely upon its & systems. Lube & Cooling The American Petroleum Institute (API) rates oil service classification.
More informationKings Regional Occupational Program Course Information
Kings County Board of Education Approval March 2, 2011 California Department of Education Recertification December 2008 Kings Regional Occupational Program Course Information Course Title: Advanced Automotive
More information630, 631 & 632 Bobcat & Melroe Bobcat
Bobcat 630, 631 & 632 Bobcat & Melroe Bobcat THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF BOBCAT OR IT S SUCCESSORS. BOBCAT AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More information20.Cylinder Block. Cylinder Block A: REMOVAL ME(H4DOTC)-63 ST CRANKSHAFT STOPPER
Cylinder Block MECHANICAL 20.Cylinder Block A: REMOVAL Before conducting this procedure, drain engine oil completely. 1) Remove the intake manifold. 2)
More informationTURBOCHARGER SYSTEM TURBOCHARGER TC 1
TURBOCHARGER SYSTEM TURBOCHARGER TC1 TC2 TURBOCHARGER SYSTEM Description DESCRIPTION Systems which increase the amount of air sent to the engine are either turbocharger type (using exhaust gas to turn
More informationEngine, Generators Maintenance & Safety. UAE, Dubai, Cityseason Suites Hotel. Training Course : One Weeks Training Course In. As Under Details :
Training Course : Engine, Generators Maintenance & Safety One Weeks Training Course In UAE, Dubai, Cityseason Suites Hotel As Under Details : Mohammad Issa External Training Coordinator 0096597535000 Tel.
More information1989 BMW 635CSi. 3.5L 6-CYL Engine - 3.5L 6-Cylinder
Fig. 3: Rocker Arm Assembly Courtesy of BMW OF NORTH AMERICA, INC. VALVE SPRINGS NOTE: Install springs with paint stripe (tight coil end) against head. Inspection Check spring free length. Check spring
More informationThe Basics of Four-Stroke Engines
Youth Explore Trades Skills Description Students will be introduced to basic engine parts, theory and terminology. Understanding how an engine works and knowing some key related parts and terminology is
More informationCONTENTS. List of Illustrations List of Tables How To Use This Manual CHAPTER 1 SAFETY AND GENERAL Section 1.00 Warning Tags And Decal Locations
List of Illustrations List of Tables How To Use This Manual CHAPTER 1 SAFETY AND GENERAL Section 1.00 Warning Tags And Decal Locations Warning Tags And Decal Locations...1.00-1 Section 1.05 Safety Safety
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationPerkins New 1000 Series Models AJ to AS and YG to YK
Perkins New 000 Series Models AJ to AS and YG to YK WORKSHOP MANUAL 4 and 6 cylinder diesel engines for industrial and agricultural applications Publication TPD 50E, Issue 4. Proprietary information of
More information7. CYLINDER HEAD/VALVES
7 7 7-0 SERVICE INFORMATION...7-1 CYLINDER HEAD DISASSEMBLY...7-7 TROUBLESHOOTING...7-2 CYLINDER HEAD ASSEMBLY...7-8 CAMSHAFT REMOVAL...7-3 CYLINDER HEAD INSTALLATION...7-8 CYLINDER HEAD REMOVAL...7-5
More informationWorkshop Manual. F-Super Duty : Powertrain. 03: Engine
Workshop Manual 1999 F-Super Duty 250-550 3: Powertrain 03: Engine 1999 F-Super Duty 250-550 Contents/Index GROUP 03: Engine SECTION 303-00: Engine System General Information SECTION 303-01A: Engine 5.4L
More informationD9 & D9G Crawler S/n 66A1 to 66A3265
Caterpillar Service Manual D9 & D9G Crawler S/n 66A to 66A65 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S
More informationENGINE REPAIR 966H (TAL/A6J/A6G) OPTIONS
966H (TAL/A6J/A6G) OVERVIEW S OUT OF FRAME Cylinder Packs Main Bearings Standard Big End Bearing Standard Thrust Plates Fuel Filter Filter Assembly - Water Separator Cap-Pressure (Radiator) Engine Oil
More information2.2L 4-CYL - VIN [S]
2.2L 4-CYL - VIN [S] 1994 Toyota Celica 1994 ENGINES Toyota 2.2L 4-Cylinder Celica NOTE: For repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION article
More informationAdvanced Auto Tech. ASE A 1 Test Preparation Engine Upper End Theory & Service
Advanced Auto Tech ASE A 1 Test Preparation Engine Upper End Theory & Service Torque to yield bolts stretch to their yield point when tightened and should not be reused. True or False The sealing lip &
More informationAutomotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
More informationLANLEO11 - SQA Unit Code F9GV 04 Service and repair engines on land-based equipment
Service and repair engines on land-based equipment Overview This standard covers the construction and operating principles of two-stroke and four-stroke spark ignition and compression ignition engines
More informationD6 & D6C Crawlers S/n 74A1, 76A1, 41A1, 71A1, 73A1, 82A1 & 96A1 & up
Caterpillar Service Manual D6 & D6C Crawlers S/n 74A, 76A, 4A, 7A, 73A, 82A & 96A & up Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS.
More informationENGINE MECHANICAL EM SECTION CONTENTS
ENGINE MECHANICAL EM SECTION CONTENTS INTAKE MANIFOLD...EM-2 Component Parts Location...EM-2 Removal and Installation...EM-3 Inspection...EM-3 EXHAUST MANIFOLD...EM-4 Component Parts Location...EM-4 Removal
More information420cc Builder Modified Predator OHV engine Technical Specifications 5/27/13
BM (Builder Modified) Predator 420cc OHV engine With Electric Start Approved Engine: OHV Predator 420cc engine modified only according to these BM OHV Engine Spec. ENGINE SPEC SHEET FOR BM 420cc OHV CLASS
More informationSPECIFICATIONS TEST AND ADJUSTMENT SPECIFICATIONS SPECIFICATIONS ENGINE FD620D, K SERIES
TEST AND ADJUSTMENT Engine Oil Pressure Sensor Activates............................... 98 kpa (14.2 psi) Oil Pressure While Cranking (Minimum).......................... 28 kpa (4 psi) Oil Pressure.....................................
More informationENGINE, WITH CONTAINER: TURBOSUPERCHARGED, DIESEL, FUEL INJECTION, 90-DEGREE V TYPE, AIR-COOLED, 12-CYLINDER, ASSEMBLY;
*TM 9-2815-200-35 DEPARTMENT OF THE ARMY TECHNICAL MANUAL DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS FOR ENGINE, WITH CONTAINER: TURBOSUPERCHARGED,
More information955L Traxcavator S/n 64J, 71J & 85J Volume 1 of 2
Caterpillar Service Manual 955L Traxcavator S/n 64J, 71J & 85J Volume 1 of 2 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR
More informationAutomotive Technology
It is the mission of the Automotive Department of Victor Valley Community College to provide quality automotive instruction to a diverse community of students; the array of courses offered shall serve
More informationSection 10 Chapter 7
Section 10 Chapter 7 24 Valve, 8.3 Liter Engine Troubleshooting Symptoms Identification Note: All coding used in the 8.3 Liter and 9 Liter engine manuals are Cummins engine codes. These engine codes have
More informationVehicle and Engine Technology
Vehicle and Engine Technology Second Edition List of Chapters: Preface to the first edition Preface to the second edition 1 Vehicle body and chassis layout 1.1 The motor car 1.2 Commercial vehicles 1.3
More informationMODEL: 4640 & 4840 Chassis Only Volume 1 of 3
John Deere MODEL: 4640 & 4840 Chassis Only Volume 1 of 3 THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE
More information