Gripper arms Content. Gripper arms at a glance Angle arms Elbow arms
|
|
- Holly Francis
- 6 years ago
- Views:
Transcription
1 Gripper arms ontent Gripper arms at a glance Angle arms Elbow arms
2 Gripper arms At a glance FIPA Gripper arms, clamping diameter 10, 14, 20, 30 mm Angle arms, elbow or rigid > Elements for integration of gripper components > Secure clamping even under high load GR > Spring-loaded elbow, rotatable, torsionally rigid > ompensates lift when product is ejected from sprue mould > Precise function even with angular loads GR02.070A > Rigid arms GR > Modular elbow, heavy duty > lamping heads can be exchanged with suction heads of GR > See page 95 Arms for suction cups, elbow or rigid > Elements for integration of suction cups in gripper systems GR > Spring-loaded elbow, with torsionally rigid > ompensates lift when product is ejected from sprue mould > Precise function even with angular loads GR03.080A > Spring-loaded, rigid arms, torsionally rigid GR > Modular, heavy duty > Suction heads can be exchanged with clamping heads of GR > See page Phone +49 (0) 89 /
3 F Ø A Ø E Gripper arms Angle arms Angle arms - rigid Angle arms - rigid > omponents for mounting grippers or gripper fingers via clamping elements to extrusions Ø [mm] GR02.070A GR02.071A GR02.072A GR GR GR GR GR02.101A GR02.102A GR GR GR GR [mm] [mm] E [mm] F [mm] [mm] 95
4 Ø A E F Gripper arms Angle arms Elbow arms - adjustable Elbow arms - adjustable > omponents for mounting grippers or gripper fingers via clamping elements to extrusions > Angle can be freely adjusted Ø [mm] [mm] GR GR GR GR GR GR GR GR GR GR GR GR [mm] E [mm] F [mm] G [mm] [mm] M [mm] G Ø M 96 Phone +49 (0) 89 /
5 Ø A Gripper arms Angle arms Elbow arms - heavy duty, clamping-ø 10, 14, 20 mm Elbow arms - heavy duty, clamping-ø 10, 14, 20 mm > omponents for mounting grippers or gripper fingers via clamping elements to extrusions > Secure clamping even under heavy load > Angle can be freely adjusted Notes > Rotary heads are exchangeable with heads of suction fingers GR , GR , GR Ø [mm] GR GR GR GR GR GR GR GR GR [mm] [mm] [mm] M [mm] lamping a gripper at 90 without using rotatable clamping head G Ø M 97
6 , Gripper arms Angle arms Rotary heads for angle arms Ø 30 mm - heavy duty Rotary heads for angle arms Ø 30 mm - heavy duty NEW Rotary head GR with angle arm GR > Rotary heads for angle arms with shaft diameter 30 mm > Integration of gripper elements with clamping diameter 20 or 30 mm > Secure clamping even under heavy load > Pivoting range 0 to ~130, can be freely adjusted in two directions Ordering notes > Please order your combination of gripper arm and rotary head lamping-ø [mm] Suitable for angle arms GR GR02.104, GR02.105, GR02.106, GR GR GR02.104, GR02.105, GR02.106, GR Suitable combination of gripper arm and rotary head ength [mm] Gripper arms lamping-ø 20 mm lamping-ø 30 mm 50 GR GR GR GR GR GR GR GR GR GR GR GR Gripper arm + Rotary head [mm] 1 [mm] 2 [mm] 3 [mm] GR GR / GR GR GR / GR GR GR / GR GR GR / GR * = ocking screw * 98 Phone +49 (0) 89 /
7 Gripper arms Angle arms Angle arm - spring-loaded, rotatable, torsionally rigid Angle arm - spring-loaded, rotatable, torsionally rigid NEW lamping a gripper at 90 without using rotatable clamping head > omponents for mounting grippers or gripper fingers via clamping elements to extrusions > Torsionally rigid spring-load compensates lift when product is ejected from sprue mould > Novel clamping of gripper elements even under heavy load i ft [mm] GR GR GR GR GR GR Ø Ø A F M Ø [mm] [mm] [mm] F [mm] [mm] M [mm] GR GR GR GR GR GR
8 Gripper arms Angle arms Spring-loaded elbow arms with ball guide and torsionally rigid Spring-loaded elbow arms with ball guide and torsionally rigid HIGHY PREISE OPERATION, EVEN UNER OA > omponents for integration of grippers > Torsionally rigid ball guide absorbs lateral forces and torque for high precision movement > Spring-load compensates lift when product is ejected from mold i ft [mm] GR GR Ø Ø A M F Ø [mm] [mm] [mm] F [mm] [mm] M [mm] GR GR x Phone +49 (0) 89 /
9 Gripper arms Elbow arms Gripper arms for vacuum cups - rigid Gripper arms for vacuum cups - rigid > omponents for the integration of vacuum cups via internal threads > Installation flexibility thanks to two vacuum connections on head and shaft end Ordering notes > Sealing plug suitable for both connections included in scope of delivery GR03.001A 11 M5 M5 M GR03.002A 16 M5 M5 M GR03.003A 22 M5 M5 M GR03.010A 27 G1/8 G1/8 G1/ GR03.011A 39 G1/8 G1/8 G1/ GR03.012A 49 G1/8 G1/8 G1/ GR G1/4 G1/8 G1/ GR G1/4 G1/8 G1/ GR G1/4 G1/8 G1/ GR G1/4 G1/4 G1/ E [mm] [mm] M [mm] M Ø A # E 101
10 Gripper arms Elbow arms Elbow gripper arms for vacuum cups Elbow gripper arms for vacuum cups > omponents for the integration of vacuum cups via internal threads > Ease of assembly due to use of screws with internal and external hex bits GR M5 M GR03.041A 38 M5 M GR03.042A 43 M5 M GR03.050A 58 G1/8 G1/ GR03.051A 69 G1/8 G1/ GR03.052A 78 G1/8 G1/ GR03.070A 72 G1/8 G1/ GR03.071A 87 G1/8 G1/ GR03.072A 103 G1/8 G1/ GR03.073A 93 G1/4 G1/ GR03.074A 106 G1/4 G1/ GR03.075A 123 G1/4 G1/ [mm] E [mm] [mm] M [mm] Ø A # E M 102 Phone +49 (0) 89 /
11 Ø A E Gripper arms Elbow arms Elbow gripper arms for vacuum cups, standard Elbow gripper arms for vacuum cups, standard lamping a gripper at 90 without using rotatable clamping head > omponents for the integration of vacuum cups via internal threads > Infinitely variable angle adjustment > Up to 50 % less weight compared to GR ff. > Innovative suction head design which requires no snap ring Notes > Alternatively to the vacuum head, a gripper can be directly mounted: - GR : Suitable for grippers, series 80, 90, GR : Suitable for grippers, series 130, 140 > Suction heads can be easily exchanged with clamping heads GR , GR , GR GR M5 M GR M5 M GR M5 M GR G1/8 G1/ GR G1/8 G1/ GR G1/8 G1/ GR G1/4 G1/ GR G1/4 G1/ GR G1/4 G1/ [mm] E [mm] [mm] Mounting illustration G 103
12 Gripper arms Elbow arms Spring-loaded elbow arms for vacuum cups Spring-loaded elbow arms for vacuum cups > omponents for integration of vacuum cups via internal threads > Spring-load compensates lift when product is ejected from mould > Smooth motion through use of plastic bushing > Second air connection at the shaft end for GR03.090A and above i ft [mm] GR03.080A M5 M GR03.081A M5 M GR03.090A G1/8 G1/8 M GR03.091A G1/8 G1/8 M GR G1/4 G1/8 G1/ GR G1/4 G1/8 G1/ G [mm] E [mm] F [mm] [mm] E # G Ø A F 104 Phone +49 (0) 89 /
13 Gripper arms Elbow arms Spring-loaded elbow arms for vacuum cups, torsionally rigid Spring-loaded elbow arms for vacuum cups, torsionally rigid NEW > omponents for integration of vacuum cups via internal threads > Torsionally rigid spring-load compensates lift when product is ejected from mould i ft [mm] GR M5 M GR M5 M GR G1/8 G1/ GR G1/8 G1/ GR G1/4 G1/ GR G1/4 G1/ [mm] E [mm] F [mm] G [mm] H [mm] [mm] lamping a gripper at 90 without using rotatable clamping head H Ø A E G F 105
14 Gripper arms Notes Notes: 106 Phone +49 (0) 89 /
Quick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
More informationGripper Arms 300. Application example WKA. Application example GLA / GLA V. Application example GSE / GSE U / GGE
ripper rms pplication example WK Quick hange -hannel lamps Tubular lamps onnectors pplication example / V ccessories- up- onnectors ups ups- pplication example S / S U / dapter ripper rms rippers ripper
More informationVacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 www.fipa.com 15 Vacuum gripping systems Vacuum gripping systems
More informationVacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 www.fipa.com 15 Vacuum gripping systems Vacuum gripping systems
More informationVacuum generation Compact ejectors
Energy saving function by integrated pressure control saves up to 5 % of energy q = Vacuum connection z = Compressed air connection Product notes s = Exhaust outlet Check valve with wire mesh to keep out
More informationNew Products 10/2018. New EOAT Components
New Products 10/2018 New OT omponents Tubular Remarks The brochure has been created with the most possible diligence. ll details are based on experiential determined values, accurate calculations, and
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More informationCNC Robots. WITTMANN Named a Best Buy for Robots. Technology working for you.
CNC Robots WITTMANN Named a Best Buy for Robots Technology working for you. The Innovative Robot Concept Decades of application experience and innovative developments have made the WITTMANN robots what
More informationConnectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
More informationSolutions for the Food Industry
Solutions for the Food Industry Bakeries, Dairies, Frozen Foods, Poultry, Meat Processing, Packaging, Bottle Blowing Long life replacement actuators to reduce downtime and increase productivity Packaging
More informationSIGMA-II. Contents SIGMA-II. 1. Scissor assembly Thread guide and eccentric drive Tucker plate assembly...
Contents Contents 1. Scissor assembly... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assembly... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationTray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc.
FIGURE 8-28A RAIL & FINGER ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 1 0032700 BAR, LID HOPPER GUIDE MT (34") 1 ~ 0032701 BAR, LID HOPPER GUIDE MT (42") 1 2 0061300 SUPPORT PAD, LIDDER 1 3 0033800 LEFT RAIL,
More informationThe Easiest Way to Build a Custom Handling System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service The Easiest Way to Build a Custom Handling System camoline the Cartesian Motion building system 2 Rationalizing
More informationVacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 15 Vacuum gripping systems Vacuum gripping systems at a glance
More informationMANN Europiclon Two stage air cleaner modular system
MANN Europiclon Two stage air cleaner modular system Background picture: Claas 7 MANN Europiclon... Applications The MANN Europiclon is the ideal intake air cleaner for construction and agricultural machinery,
More informationrm-port rm-port rm-port rm-port
rm-port PIVOT ARMS The new pivot arm generation rm-port is characterised by an exceptionally rapid and user-friendly installation and improved ease of use for users. rm-port is equipped with an innovative
More informationInnovative solutions for your handling projects
For a Compact and durable design, Look no further! Foams adjust to smooth and rough surfaces easily Level compensators allow the Mini-Gripper to adjust for uneven layer heights without changing the mount
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More informationSuspension System CS-3000
Suspension System CS-3000 Straight coupling Elbow coupling (colour) 1015300177 RAL 9006 white aluminium 1015300001 RAL 16 anthracite grey 101530017 RAL 9006 white aluminium 1015300002 RAL 16 anthracite
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationThe BERNSTEIN CS-3000
Flexible and efficient: The BERNSTEIN CS-3000 Designers and manufacturers expect modern suspension systems to feature variable configuration, progressive design and complete ease installation. BERNSTEIN
More informationOperating Instructions and Parts Manual BRK-4T & 10T Hydraulic Body Repair Kits
Operating Instructions and Parts Manual BRK-4T & 10T Hydraulic Body Repair Kits JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-680014 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com
More informationBase Kit Chain Drivetrain Build Guide
222fg Base Kit Chain Drivetrain Build Guide August 11, 2017 Chain Drivetrain Build Guide Copyright 2017 REV Robotics, LLC 1 1.1 Description This document outlines the steps required to four wheel, chain
More informationMidCap Rotary Rake. Illustrated Parts Breakdown
MidCap Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Main Frame Transport Wheel Assembly Lift Arm Assembly Main
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationThe flexible connection compensator in one
STRAU- The flexible connection compensator in one and Sectional view STRAU- is the axially flexible coupling for all pipe materials. This type of coupling not only connects pipes, it simultaneously compensates
More informationProLifter C18.1. Optional Keeper Key. ProLifter assembly includes a three piece construction: Bar or Rod Bar. Bar
C18.1 PCS Company s is the only three dimensional (3) ball lifter. Unlike other lifters that have issues with binding and excessive wear, the is designed to allow free movement in all directions. Save
More informationVacuum Components SHREE VYANKATESHWARA E N T E R P R I S E S
CKD Actuators Pneumatic Valves Pneumatic Auxiliary Components Pneumatic Auxiliary Components (Main Line Unit) Pneumatic Filter, Regulator, Lubricator (F.R.L. Unit) Related Pneumatic Products DD Actuator
More informationSAFEMAX zero backlash Torque Limiters SAFEMAX
SFEMX zero backlash imiters SFEMX ontents SFEMX zero backlash imiters Page Description 71 haracteristics 72 abel code 72 SFEMX Zero acklash imiters SIT GS/SG/N 73 SFEMX Zero acklash imiters SIT GS/SG/N
More informationModular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationFacts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
More informationMICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
More informationMaterial Handling System
72 The versatile Material Handling System Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter. Therefore
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationRK Monitor Mounting... page 254. GT page 264. GT 50, 60, page 274. Support arm / equipment carrier system
Support arm / equipment carrier system RK Monitor Mounting... page 254 GT 48... page 264 GT 50, 60, 80... page 274 Support arm / equipment carrier system RK Monitor Mounting All purpose mounting for monitors,
More informationCM2X-Z 10 - C D M 2 X L Z - M9BW. Port thread type. Nil TN TF. Rc NPT. Rubber bumper only. Cylinder stroke (mm) Action
Series 10-11- CM2X-Z ø, ø, ø, ø Low Speed Cylinder ouble Acting, Single Rod How to Order Clean series 10 11 Vacuum suction type irectional Control Valves Vacuum suction type Low speed cylinder B L F G
More informationStandard suction cups
BLOCK CYLINDER Double acting V E R I N S HYDRAULIQUE Standard suction cups AND Inserts for standard suction cups VCN SERIE ISO seals Maximum working pressure: 500 bar Bore: Ø 25 to Ø 125 mm 1 Selecting
More informationGranulation and automation technology for the plastics industry
Granulation and automation technology for the plastics industry Choose the system partner who is also a competent dialogue partner: GETECHA. For more than five decades, we have been acting as consultants
More informationVACUUM CUP SUPPORTS. 3D drawings available at
In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female
More informationTorque Limiter 320 Series Overview. Torque Limiter 320 Series
Torque Limiter 0 Series Overview Torque Limiter 0 Series Torque Limiter 0 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality products, design
More informationPart # Impala Level 2 Complete Coil-Over System HQ Series
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11290210 65-66 Impala Level 2 Complete Coil-Over System HQ Series Front Components: 1 11283509 Front HQ
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationParallel Style Air Gripper Standard Type. How to Order. Nil: Basic type. Action Double acting. 1: Side tapped mounting. Action Double acting
Parallel Style Air Gripper Standard Type Series -MHZ2 ø10, ø, ø20, ø25, ø32, ø40 ø to ø25 MHZ2 Finger position/option Standard (MHQG2 compatible type) Nil: Basic type Narrow type (MHQ2 compatible type)
More informationCarl Stahl Kromer GmbH. Spring Balancers & Zero Gravity Balancers.
Carl Stahl Kromer GmbH Spring Balancers & Zero Gravity Balancers www.federzug.com Spring Balancers & Zero Gravity Balancers I Introducing Carl Stahl Kromer Safety Simply a Matter of Fact with CARL STAHL
More informationBag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationCompact systems! Ball screw and toothed belt axes ELGC and mini slides EGSC. Modular and low cost
Ball screw and toothed belt axes ELGC and mini slides EGSC Modular and low cost Compact systems! Highlights Compact, lightweight systems Low cost solutions Modular axes easily assembled into multi-axis
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationGR1-15 Series. Sheet Metal Grippers Ordering Information GR1-15 BE DPP - MXX - XXX - XXX
Sheet Metal Grippers Ordering Information GR1-15 BE - 045 - DPP - MXX - XXX - XXX Cylinder Type & Porting Step 1 - Cylinder Type Choose One B B C B E Flange Base Round Cylinder C Jaw Arrangement Options
More informationEOAT Design and Build Service
2: EOAT Design and Build Service From the simplest to the most complex EOAT, EMI specializes in designing and building customized End-of-Arm-Tooling Priced Competitively. Get started by sending us a sample
More informationInnovative Designs For Positive Parts Transfer
Innovative Designs For Positive Parts Transfer AUTO-SLIDE CATALOG CONTENTS Cylinder Powered Linear Slide (AFPRS ) 3 Cylinder Powered Bi-Directional Slide (AFPRBD) 6 V Style Pick & Place (AFPPV) 8 L Style
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationSE-DUZ Direct-Drive All-Electric Series
SE-DUZ Direct-Drive All-Electric Series SE-DUZ Series Direct-Drive All-Electrics Low-inertia, high-performance direct-drive motors for plasticizing, injection, clamping and ejection New PC-based control
More informationContents SIGMA. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationNumatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
More informationChapter B-3. Chapter 3. Actuators and output devices. Festo Didactic TP101
155 Chapter 3 Actuators and output devices Festo Didactic TP101 156 An actuator is an output device for the conversion of supply energy into useful work. The output signal is controlled by the control
More informationWhy Choose Rexnord? 866-REXNORD/ (Within the U.S.) (Outside the U.S.)
866-REXNORD/866-739-6673 (Within the U.S.) 414-643-2366 (Outside the U.S.) www.rexnord.com Why Choose Rexnord? When it comes to providing highly engineered products that improve productivity and efficiency
More informationRVDRT & RVVRT Model 404 to 408
All-Star 00% Oil Free Rotary Vane Pump & Compressor RVDRT & RVVRT Model 0 to 08 0 0 0 ( version RVDRT* pcs ) 30 3 3 33 3 35 0 (version RVVRT ) 3 ( version RVDRT ) 50 60 ( version RVDRT ) 70 ( version RVVRT
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationDURAFLEX - Remote Controls
2 DURAFLEX - Remote Controls DURAFLEX - Core 1 1.2 1.1 2.2 2.3 2.1 DURAFLEX - Conduit DURAFLEX is a mechanical, flexible remote control cable for the transfer of pressure and tractive forces. The cable
More informationSIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS
LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DIS PAK OUPLINGS GENERAL INFORMATION R+W DIS PAK OUPLINGS: SERVIE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite service
More informationPart # Lincoln Level 2 Air Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 12060299 64-69 Lincoln Level 2 Air Suspension Package Front Components: 1 12060999 CoolRide Kit 1 12060601
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationPart # Impala Level 1 Complete Coil-Over System RQ Series
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11290109 65-66 Impala Level 1 Complete Coil-Over System RQ Series Front Components: 1 11283509 RQ Series
More informationrev 1_09/20/2017 PS-35C EA3500SR
C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7
More informationInnovative Design and Sourcing Solutions
PRODUCT CATALOG 2014 - Holland MI - 49423 Power Adaptable Handles Load n Lock s handles have set the standard when it comes to the power lock adaptable cap and tonneau handles, we currently supply many
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
PH English version EDITION - 06/007 CODE - 979 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 05-00 - Fax: +55 5 06 E-mail: export@jacto.com.br
More informationB190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly
245-315B190 8 H.P. Lawn Vacuum (1995) Page 1 of 22 Chute Assembly 245-315B190 8 H.P. Lawn Vacuum (1995) Page 2 of 22 Chute Assembly Ref # Part Number Qty S/P/F Description 1 681-0068 1 S CHUTE ASSEMBLY
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationCompact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationMC range and accessories
odular clamping equipment pag. range and accessories 3.1. 3 -X pag. 3.1. 4 S- pag. 3.1. 5 xtension element ouble support with jaws pag..1. 6 pag. omplete extension element pag. 3.1. 6 ase with fixed support
More informationMultiCam Classic Series CNC Router Feature and Specification Guide. High-Performance CNC Routing at an Entry-Level Price
MultiCam Classic Series CNC Router Feature and Specification Guide High-Performance CNC Routing at an Entry-Level Price MultiCam accepted the industry challenge to build a rigid, reliable CNC cutting machine
More informationSECTION 18 TOOLING EDCO USA 18:1
SETION TOOLING 2017 EDO US www.edcousa.net :1 TOOLING QUIK HNGE SLIDES ROOT QUIK HNGE PUMP QUIK HNGER MIRO-TOOLING QS : Quick hange Slides :3 - :6 RQP : Robot Quick hange Pump :7 - :8 Quick hanger :9 -
More informationAxis Modules pneumatic
Axis Modules pneumatic Axis Modules XY-Compensation Order no. Stroke XY-Ebene Handling weight Page ± [mm] recommended [kg] Product Information 6 XY70 3 6 10 XY100 5 12 12 XY160 8 30 14 XY220 10 150 16
More informationSpare Parts List GS 14 / GS 15 GS 14 E / GS 15 E
win ter h lter Spare Parts List GS 14 / GS 15 GS 14 E / GS 15 E Edited: 03/97 Revised: 12/00 Part no.: 89002487 Summary Water supply Pages 1 and 2 SoftMatik (Softener) Pages 3 and 4 Tank heating and water
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationHR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.
HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards
More informationPart # Impala Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040298 58 Impala Air Suspension System Front Components: 1 11053001 HQ Series Front Shockwaves 1 11052899
More informationFacts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
More informationTWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
More informationModular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
More informationwith MR rail and R, R.T, R.S sliders
inear Roller earing ystem with MR rail and R, R.T, R. sliders N R R R N The MR eries inear Rail ystem consists of a -section steel rail with internal convex raceways, where robust double row ball bearing
More informationMK 10-9V - PL 10 7, MK 10-13V - PL REF d1 d2 d3 d4 L L1 P (bar) T ( C)
Euro MK10-PL Quick Release coupling straight with valve Push-to-Lock, O-ring: Viton REF d1 d2 d3 d4 L L1 P (bar) T ( C) MK 10-9V - PL 10 7,5 17 9 54 24 15 200 MK 10-13V - PL 13 10 23 13 64 28 10 200 MK15-PL
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationCombine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
More informationPart # Impala Fixed Valving Coil-Over Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Part # 11060109 59-64 Impala Fixed Valving Coil-Over Suspension Package Front Components: 1 11053509 RQ Series Front Coil-overs 1 11052899 Front Lower StrongArms
More informationVacuum pad for packaging bag
Vacuum pad for bag-like article conveyance Characteristics http://en.pisco.co.jp/ New Product Realizes followability to work-piece and posture stabilization during conveyance. Soft material is used for
More informationClassification and Characteristics of Rolling Bearings
1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates
More informationCompact! Spindle and toothed belt axes ELGC and mini slides EGSC. Maximum use of space
Spindle and toothed belt axes ELGC and mini slides EGSC Maximum use of space Compact! Highlights Very compact and costefficient Optimal installation space to working space ratio Unique one-size-down assembly
More informationRobo-Arm Kit
Robo-Arm Kit 85009937 For use with COATS Model Series Tire Changers This is a supplement to your operating manual and covers the installation of the Robo-Arm. If you do not have your original operating
More informationPARTS BOOK ROTARY HEADS 40 CUT EXCAVATOR MOUNT
PARTS BOOK ROTARY HEADS 40 CUT EXCAVATOR MOUNT 5.10.18 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE
More informationInkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.
Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM
More information7060 AX/EX. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
7060 AX/EX Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies READ these instructions before placing unit in service KEEP these and other materials
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More information