Tray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc.

Transcription

1 FIGURE 8-28A RAIL & FINGER ASSEMBLY ITEM PART NO. DESCRIPTION QTY BAR, LID HOPPER GUIDE MT (34") 1 ~ BAR, LID HOPPER GUIDE MT (42") SUPPORT PAD, LIDDER LEFT RAIL, LONG LID HOPPER SUPPORT, LIDDER SHAFT, HOPPER BRACE RIGHT RAIL, LONG LIDDER HOPPER STOP, BOX TUMBLER FINGER, LIDDER STOP 1 ~ FINGER, LIDDER STOP (REVERSE) MOUNT, LOWER FINGER FINGER, LOWER SHOE, CENTER FLANGE FORMING PLATE, LIDDER GUIDE 1 ~ PLATE, LIDDER GUIDE MOUNT, LIDDER FINGER STUD, BRAKE SHOE FINGER BASE #2, FINGER, LIDDER OPENER 2 ~ FINGER, LIDDER OPENER 2 ~ FINGER, LIDDER OPENER PLATE, FINGER SUPPORT PLATE, AUX. COMPRESSION FINGER #2 (MOVEABLE) BUSHING /8 DIA. ROLL PIN BUSHING BUSHING BUSHING, BRONZE BUSHING /16 ROD END /32 DIA. ROLL PIN (CUT TO 1 3/4") SPRING BUSHING BUSHING BUSHING SPRING BUSHING /2" SAE FLAT WASHER /16-18 X 1 1/2 HEX HD BOLT /16" SAE FLAT WASHER 1 ~ = VARIABLE PART 8-64

2 FIGURE 8-28A RAIL & FINGER ASSEMBLY 8-65

3 FIGURE 8-29A SAFETY BAR ASSEMBLY BLISS LIDDER ITEM PART NO. DESCRIPTION QTY ARM, BOX TUMBLER PIN, BOX TUMBLER ARM BRACKET, SPRING RETURN END ADJ BRACKET, LIDDER PLUG, DETENT SPRING BAR, LIDDER SAFETY ROD, FEED LINKAGE KICKER, SAFETY LIDDER BRACKET, KICKER CABLE SPACER, TUMBLER BAR, TUMBLER BUSHING BUSHING BUSHING, BRONZE SPRING, LIDDER SPRING, BALL DETENT BALL, DETENT SAFETY MICRO SAFETY SWITCH

4 FIGURE 8-29A SAFETY BAR ASSEMBLY 8-67

5 FIGURE 8-30A HOPPER & CUP ASSEMBLY ITEM PART NO. DESCRIPTION QTY BRACE, LID HOPPER SUPPORT, LONG END HOPPER ROD, END HOPPER SPREADER LEFT RAIL, LID HOPPER SIDE PLATE, RAIL HOPPER CLAMP /4" AIR TEE SHAFT, LIDDER SUCTION CUP ARM, LIDDER CUP MTG SHIM, LIDDER HOPPER RIGHT RAIL, LID HOPPER SIDE MOUNT, CUP CABLE LIDDER BRACKET, SPRING MOUNT ARM, LID OPEN CON ROD MOUNT, SPRING ADJUSTING A/N SET COLLAR, 3/4" BUSHING, BRONZE DEGREE ELBOW /8 POLY FLOW TUBING VACUUM CUP, BLUE VICAS SPRING /16 ROD END /16 SQUARE KEY SET COLLAR CABLE- LID CUP (SB) REF ~ CABLE- LID CUP (WB) REF BUSHING 1 NOTE: A/N = AS NEEDED 8-68

6 FIGURE 8-30A HOPPER & CUP ASSEMBLY 8-69

7 FIGURE 8-31A HOPPER WEIGHT ASSEMBLY ITEM PART NO. DESCRIPTION QTY WEIGHT, END HOPPER FINGER, BOX LIDDER PUSHER ROLLER, WEIGHT LIDDER ROD, LOWER WEIGHT LIDDER MOUNT, WEIGHT LIDDER GUIDE, LID HOPPER MOUNT, UPPER WEIGHT LIDDER BRACKET, HOPPER GUIDE L FINGER, LID FLAP OPENER BAR, FINGER MOUNT STRAP, FINGER MTG BAR SCREW, MATT SUPPORT BUSHING BEARING RETAINER /8 SAE FLAT WASHER SPRING BUSHING /8 SET COLLAR ROLL PIN 1.0" LG BUSHING

8 FIGURE 8-31A HOPPER WEIGHT ASSEMBLY 8-71

9 FIGURE 8-32A CAM-LEVER ASSEMBLY KICKER/FINGER CABLES ITEM PART NO. DESCRIPTION QTY LEVER, CABLE PULL CAM, FINGER CABLE CABLE BRACKET, BAR, LOWER MOUNT CLAMP CAM, KICKER CABLE CAM FOLLOWER, 1 3/ BUSHING, SLEEVE BUSHING, LEVER /16 CABLE, FINGER CLAMP (2-90) /16 CABLE, KICKER (2-65) WASHER /16 ROD END SPRING 2 ASSEMBLY MOUNTED ON THE RIGHT SIDE OF MACHINE. 8-72

10 FIGURE 8-32A CAM-LEVER ASSEMBLY KICKER/FINGER CABLES 8-73

11 FIGURE 8-33A CAM-LEVER CUP ASSEMBLY SPREADER MOUNT ITEM PART NO. DESCRIPTION QTY CAM, CUP CABLE LIDDER STRAP, PICK LEVER LINKAGE, CAM ARM LIDDER BLOCK, MATT PICK STRIP BRACKET, CABLE BLOCK, BOLTING CAM FOLLOWER, 1 3/ BUSHING, BRONZE BUSHING CABLE LIDDER (SB) (5/ ) 1 ~ CABLE LIDDER (WB) (5/ ) /16 ROD END SPRING 1 ASSEMBLY MOUNTED ON THE RIGHT SIDE OF MACHINE. ~ = VARIABLE PART 8-74

12 FIGURE 8-33A CAM-LEVER CUP ASSEMBLY SPREADER MOUNT 8-75

13 FIGURE 8-34A VACUUM PUMP ASSEMBLY ITEM PART NO. DESCRIPTION QTY CYLINDER, VACUUM LIDDER PLATE, RUBBER CUP MTG CUP, VACUUM CYLINDER WASHER, CUP CLAMP FELT, WASHER VACUUM CUP ROD, CON SUCTION CUP NUT, CUP CON ROD SLEEVE CRANK, SUCTION CUP PIN, SUCTION CUP CRANK BLOCK, SUCTION CUP WASHER /8-24 STD HEX HD NUT BUSHING BUSHING, BRONZE BUSHING, THREADED DEGREE ELBOW /8 SAE FLAT WASHER OIL CUP

14 FIGURE 8-34A VACUUM PUMP ASSEMBLY 8-77

15 FIGURE 8-34B FRAME MODIFICATION 8-78