Metal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
|
|
- Edmund Robinson
- 6 years ago
- Views:
Transcription
1
2 HSS-E IN 338 cobalt HSS IN 338 groun HSS IN 338 stanar HSS IN 338 stanar, shank reuce 85 HSS IN HSS IN HSS hollow section rill bit / facae rill bit 88 HSS IN HSS IN HSS IN HSS ouble-en rill bit 93 HSS rill bit KEILBIT 94 HSS combination tool KEILBIT 95 HSS countersink KEILBIT 96 HSS countersink IN 335 C 97 HSS eburring countersink 98 HSS tube & sheet rill 99 HSS step rills 100 Scriber 101 HSS Hole saw bi-metal METAL RILL BITS
3 Metal rill bits Stronger than steel Nothing stops the metal rill bits because we offer a rill bit for every application. 135 HSS-E twist rill bit The HSS-E rill bit is a cobalt alloye high performance rill bit. Even with aition of 5 % Co in the cutting material these rill bits can be use for working with work pieces with a tensile strength of over 800N/m². 118 HSS twist rill bit Split Point This rill bit allows precise pilot rilling even on iagonal surfaces. The avance force ecreases by 50 %. It has the best possible true running accuracy an therefore prouces exact roun holes. It has a long tool life an ue to its conically strengthene high resistance against fracture. 118 HSS twist rill bit ue to its robust thickness of core an a istinctive harness this rill bit has a long tool life. Especially when rilling with iameters below 6 mm the anti-torsion capability is very high while the anger of fracture is low. It is very suitable for working with alloye an unalloye steel, non ferrous metals, cast iron an har plastics. 135 HSS pilot rill bit cylinrical. The HSS pilot rill bit allows exact pilot rilling without slipping ue to its self centering tip. This extra short rill bit is particularly suitable for use with han-hel machines. 120 HSS twist rill bit with carbie bit The rill bit has been groun with iamon wheels to the highest accuracy. The 2-bevel sharpening buils a centering tip which is locate exactly in the rilling axis whereby the rill bit centers itself.when working with CNC-machines it offers best performance. 70
4 Metal rill bits Cylinrical shaft Tools with roun shaft are the top selling rilling tools. The roun shaft is Hexagonal shaft (10.0 mm) The hexagonal shank offers a better transmission of rotation especially when working with big iameters an long rill bits. Morse taper The morse taper (MK) is the stanarise shape of a tool conus for clamping tools, e.g. rill bits with big iameters, reamers an chuck in the tool intake of a machine tool. Most tool intakes of rilling machines an turning lathes have the sizes MK2 up to MK6. KEILBIT (E 6.3 mm) be use for rilling. The KEILBIT has specially been invente for the fast an irect application in these machines. No change of machines is necessary anymore. For the various materials we offer ifferent alternatives of the KEILBIT. KEILBIT (C 6.3 mm) This is a ifferent kin of shaft of the KEILBIT with short hexagonal shank an short rill bit. 71
5 Hammer rill Bits HSS-E IN 338 cobalt, groun, split point 307 HSS-E IN 338 cobalt, groun, split point rive Woo rill Bits Metal rill Bits Percussion rill Bits 72 Right-han cutting, type N 5 % cobalt Short, cylinrical 135 conical section mm) iametral tolerance h8 Materials with a high strength above 800 N/ Special alloys Soler resistant steel Stainless steel V2A -V4A 140 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
6 HSS-E IN 338 cobalt, groun, split point 307 HSS-E IN 338 cobalt, groun, split point Hammer rill Bits rive Right-han cutting, type N 5 % cobalt Short, cylinrical 135 conical section mm) iametral tolerance h8 Materials with a high strength above 800 N/ Special alloys Soler resistant steel Stainless steel V2A -V4A 140 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 73
7 Hammer rill Bits HSS-E IN 338 cobalt, groun, split point 307 HSS-E IN 338 cobalt, groun, split point rive Percussion rill Bits Right-han cutting, type N 5 % cobalt Short, cylinrical 135 conical section mm) iametral tolerance h8 9, , , , , , , , , , , , , , , , , , , , Metal rill Bits Woo rill Bits Materials with a high strength above 800 N/ Special alloys Soler resistant steel Stainless steel V2A -V4A against surcharge Prouct information 307 HSS-E IN 338 cobalt, groun, split point Centre punching is not necessary irect rilling without prior centering or rilling of a pilot hole Safe pilot hole rilling, even in slanting surfaces, in pipes an wels The feeing power is reuce by up to 50 % The rill bit facilitates an increase in rilling progress by up to 45 %. Even chip removal an reuction of chip friction Extremely true running an precise roun holes No jamming of the main cutting ege an no slipping of the rill bit with through boring holes High fracture strength an long tool life Reuce friction ue to reuce iameter in the shank irection Higher breaking strength through conically reinforce rilling core Long operating time an fast rilling progress through chemical thermal metho of ue to the alloying aition of 5% Co these rill bits are well-suite for workpieces with a tensile strength of more than 800 N/mm² Extra high temperature strength to cope with suboptimal supply of coolant Up to 20% higher urability than ientically constructe HSS rill bits use uner the same operating conitions Net surcharges for self-service pouches HSS IN ,5-10,5 11,0-15,0 15,5-20,0 74
8 HSS-E IN 338 cobalt, groun, split point, in self-service pouch 307 HSS-E IN 338 cobalt, groun, split point, in self-service pouch Hammer rill Bits rive In self-service pouch Right-han cutting, type N 5 % cobalt Short, cylinrical 135 conical section mm) iametral tolerance h8 Materials with a high strength above 800 N/mm² Special alloys Soler resistant steel Stainless steel V2A -V4A Comments 157 Other imensions , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 75
9 Hammer rill Bits HSS IN 338 groun, split point 302 HSS IN 338 groun, split point rive Woo rill Bits Metal rill Bits Percussion rill Bits 76 Right-han cutting, type N High-performance high-spee steel Groun from the soli Short, cylinrical 118 conical section mm) iametral tolerance h8 142 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
10 HSS IN 338 groun, split point 302 HSS IN 338 groun, split point Hammer rill Bits rive Right-han cutting, type N High-performance high-spee steel Groun from the soli Short, cylinrical 118 conical section mm) iametral tolerance h8 142 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 77
11 Hammer rill Bits HSS IN 338 groun, split point 302 HSS IN 338 groun, split point rive Percussion rill Bits Metal rill Bits Right-han cutting, type N High-performance high-spee steel Groun from the soli Short, cylinrical 118 conical section mm) iametral tolerance h8 9, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Prouct information 302 Woo rill Bits 142 against surcharge HSS IN 338 groun, split point Centre punching is not necessary Safe pilot hole rilling, even in slanting surfaces, in pipes an wels The feeing power is reuce by up to 50% The rill bit facilitates an increase in rilling progress by up to 45%. Regular chip removal an reuction of chip friction Extremely true running an precise roun holes No jamming of the main cutting ege an no slipping of the rill bit for through-holes High fracture strength an long life Reuce friction ue to reuce external iameter in shank irection Higher breaking resistance ue to conically reinforce rilling core Long operating time an fast rilling progress ue to chemical thermal metho of Net surchages for reuce shank ø Net surcharges for self-service pouches HSS IN , , , ,5-10,5 11,0-15,0 15,5-20,0 78
12 HSS IN 338 groun, split point, in self-service pouch 302 HSS IN 338 groun, split point, in self-service pouch Hammer rill Bits rive In self-service pouch Right-han cutting, type N High-performance high-spee steel Groun from the soli Short, cylinrical 118 conical section mm) iametral tolerance h8 Comments 157 Other imensions , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 79
13 Hammer rill Bits HSS IN 338 stanar 300 HSS IN 338 stanar rive Woo rill Bits Metal rill Bits Percussion rill Bits 80 Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 144 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
14 HSS IN 338 stanar 300 HSS IN 338 stanar Hammer rill Bits rive Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 144 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 81
15 Hammer rill Bits HSS IN 338 stanar 300 HSS IN 338 stanar rive Woo rill Bits Metal rill Bits Percussion rill Bits 82 Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 144 against surcharge , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
16 HSS IN 338 stanar Prouct information The KEIL HSS twist rill bits IN 338 stanar have a high elasticity ue to heat forming. The rill bit has a particularly robust core thickness an istinct harness resulting in a long tool life. Col eposition is reuce by the special surface treatment. The achieve torsional strength leas to little anger of breakage, in particular when rilling holes of less than 6 mm iameter. This twist rill is the conventional tool for professional use in metal. The rills are excellent for machining alloye an unalloye steel with a tensil strength up to 800 N/mm², non-iron metal, cast iron an har plastics. Hammer rill Bits Percussion rill Bits Net surcharges for self-service pouches HSS IN 338 0,5-10,5 11,0-15,0 15,5-20,0 Metal rill Bits Woo rill Bits 83
17 Hammer rill Bits HSS IN 338 stanar, in self-service pouch 300 HSS IN 338 stanar, in self-service pouch rive Woo rill Bits Metal rill Bits Percussion rill Bits In self-service pouch Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 Comments 158 Other imensions , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
18 HSS IN 338 stanar, shank reuce 300 HSS IN 338 stanar, shank reuce Hammer rill Bits rive Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 against surcharge 10, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits Net surcharges for self-service pouches HSS IN 338 0,5-10,5 11,0-15,0 15,5-20,0 85
19 Hammer rill Bits HSS IN 340 groun, split point, long 340 HSS IN 340 groun, split point, long rive Woo rill Bits Metal rill Bits Percussion rill Bits 86 Right-han cutting, type N High-performance high-spee steel Long, cylinrical 118 conical section iametral tolerance h8 Comments against surcharge Other imensions on request 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Net surcharges for self-service pouches HSS IN 340 2,0-5,2 5,5-9,5 10,0-12,0
20 HSS IN 1869 groun, extra long 342 HSS IN 1869 groun, extra long Hammer rill Bits rive Right-han cutting, type N High-performance high-spee steel Extra long, cylinrical 118 conical section iametral tolerance h8 Point thinning from 3,2 mm Ø Comments For rilling extremely eep holes Cutting spee an fee rate must not be too high for rill bit stability Please ensure swarf is remove frequently an Other imensions on request 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 87
21 Hammer rill Bits 344 HSS hollow section rill bit / facae rill bit Percussion rill Bits HSS hollow section rill bit / facae rill bit rive Metal rill Bits Woo rill Bits Right-han cutting, type N Cross groun as per IN 1412 Works stanar 5, , , , , , , , , , , , , , , , , , , , , , , , , Prouct information 344 HSS hollow section rill bit / facae rill bit Ieal for rilling in metal sheet an aluminium constructions, sections an pipes, e.g. for assembly of winows, facae substructures 88
22 HSS IN 345 morse taper MK 345 HSS IN 345 morse taper Hammer rill Bits rive MK Right-han cutting, type N High-performance high-spee steel 118 conical section iametral tolerance h8 hanger with roun hole 8, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 89
23 Hammer rill Bits HSS IN 345 morse taper MK 345 HSS IN 345 morse taper rive MK Woo rill Bits Metal rill Bits Percussion rill Bits Right-han cutting, type N High-performance high-spee steel 118 conical section iametral tolerance h8 Hanger with roun hole 30, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
24 HSS IN 1897 pilot rill bit, groun, split point, extra short 303 HSS IN 1897 pilot rill bit, groun, split point, extra short Hammer rill Bits rive Right-han cutting, type N Extra short, cylinrical High-performance high-spee steel 135 conical section mm) iametral tolerance h8 In thin sheets, steel an cast steel, alloye an unalloye, up to a strength of 800 N/mm², cast iron, malleable iron, uctile iron, short chipping aluminium alloys, bronze, tough brass, gunmetal, pressure castings, iecastings KEIL HSS pilot rill bits to IN 1897 make it possible to rill a very accurate pilot hole without slipping thanks to the special selfcentring rill tip. It is not necessary to use a centre punch. This extra short rill bit is particularly suite for use with han-hel rills. 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits Percussion rill Bits 91
25 Hammer rill Bits HSS IN 8037 carbie tippe 310 HSS IN 8037 carbie tippe rive Woo rill Bits Metal rill Bits Percussion rill Bits Carbie tip accoring to IN 8010 Cutting angle 120 Right-han cutting Short, cylinrical river on shaft as per IN 1809 rill boy of HSS iametral tolerance h8 With point thinning For steel N/mm², cast steel above 700 N/mm², grey cast iron, chill casting, malleable iron, gunmetal, cast steel, tool steel, brass, bronze, manganese steel, cast iron, aluminium, bakelite, har paper, glass, porcelain an many other special alloys which are In stationary rilling machines 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Prouct information 310 HSS IN 8037 carbie tippe Groun with iamon wheels to the highest accuracy The 2-level sharpening of the cutting angle form an exact center which makes the rill bit self centering Avantages: Very precise holes with perfect surface Increase rilling length before retraction Less wear on the guie ege More holes until re-grining High power for rilling with N.C. machines No nee for rill bushes 92
26 HSS ouble-en rill bit, groun, split point 304 HSS ouble-en rill bit, groun, split point Hammer rill Bits rive ouble-ene, right-han cutting, type N, works stanar High-performance high-spee steel 118 conical section iametral tolerance h8 For rilling thin sheets for car boies an metal fabrication, for rivet holes, screw holes etc., in steel, zinc, brass, aluminium, copper sheet an plastic panels. 3, , , , , , , , , , , , , Percussion rill Bits Metal rill Bits Woo rill Bits 93
27 Ausf Infobox_ Hammer rill Bits HSS bit rill KEILBIT, groun SW 315 HSS bit rill KEILBIT, groun rive SW Percussion rill Bits Right-han cutting, type N High-performance high-spee steel Short, cylinrical 118 conical section iametral tolerance h8 1/4 bit rive IN C 6.3 2, , , , , , , , , , , , , , , , , , , , Woo rill Bits Metal rill Bits In all rilling machines, corless screw rivers an bit holers with 1/4 rill shank SS-plus locating shank for Bits an KEILBIT 33 Quick bit holer for bits an KEILBIT 67 6, , , , , , , , , , , , , , , , , , , , , , Prouct information 315 HSS bit rill KEILBIT, groun 146 Moern corless screw rivers are ext- rilling without any problems. The KEILBIT was particularly evelope for quick irect application in these machines. Machine changing is not necessary anymore. For rilling other materials we offer various types of KEILBIT. 94
28 HSS combination tool KEILBIT SW 317 HSS combination tool KEILBIT Hammer rill Bits rive SW M 1/4 bit rive IN C 6.3 Cone extension Inuction zone High-performance high-spee steel 2, , , , , , , , , , , , Prouct information 317 HSS combination tool KEILBIT Percussion rill Bits Up to max. 600 N/mm² In all rilling machines, corless screw rivers an bit holers with 1/4 rill shank SS-plus locating shank for Bits an KEILBIT 33 Quick bit holer for bits an KEILBIT 67 In one step: rilling Tapping eburring Innovations: Optimal centring Low feepower Better swarf removal Easier cutting Low torque Low cant-risk Better return guiing High bening an torsional elasticity Reuce risk of breakage Forgiving of incorrect use Metal rill Bits Woo rill Bits 146 Iniviual packaging with hanger Comments Material not thicker than 1 x (e.g.: M 6 = 6 mm material thickness ) 95
29 Hammer rill Bits HSS countersink 90 KEILBIT SW / 329 HSS countersink 90 KEILBIT rive SW M Percussion rill Bits Metal rill Bits Woo rill Bits Cutting hea accoring to IN 335 C 1/4 bit rive IN C cutting eges Raial an axial relief eburring an rilling of uniformly circular countersink holes with a smooth surface Suitable for almost all materials The best results are obtaine at low spees an a high feerate In all rilling machines, corless screw rivers an bit holers with 1/4 rill shank SS-plus locating shank for Bits an KEILBIT 33 Quick bit holer for bits an KEILBIT 67 6, ,35 6, , ,35 6, , ,35 6, , ,35 6, , ,35 6, , ,35 6, Iniviual packaging with hanger 96
30 HSS countersink 90 IN 335 C 327 HSS countersink 90 IN 335 C Hammer rill Bits rive M IN 335 C, with cylinrical shank 3 cutting eges Raial an axial relief Right-han cutting iametral tolerance h8 6, , , , , , , , , , , , , , Percussion rill Bits eburring an rilling of uniformly circular countersink holes with a smooth surface Suitable for almost all materials The best results are obtaine at low spees an a high feerate 146 Up to Ø 20,5 mm iniviual packaging with roun hole From Ø 25,0 mm iniviual packaging with Euro hole Metal rill Bits Woo rill Bits 97
31 Hammer rill Bits HSS eburring countersink 90 with cross hole 328 HSS eburring countersink 90 with cross hole rive Percussion rill Bits Metal rill Bits Countersinking angle 90, with cylinrical shank to works stanar High-performance high-spee steel Easy eburring of holes without vibration One step countersinking an eburring Suitable for soft long-chipping materials 2,0-5,0 45 6, ,0-10,0 48 8, ,0-15, , ,0-20, , ,0-25, , Woo rill Bits 146 Up to Ø 10,0-15,0 mm iniviual packaging with Euro hole From Ø 15,0-20 mm iniviual packaging with Euro hole 98
32 HSS tube & sheet rill 326 HSS tube & sheet rill Hammer rill Bits Right-han cutting High-performance high-spee steel Laser marking Two cutters Conical rilling Centering tip For rilling large holes in thin material an reboring existing holes Steel sheet an stainless steel from 0.1 to 2 mm thick Non-ferrous metals from 0.1 to 5 mm thick Plastic up to 10 mm thick 1 3,0-14,0 58 6, ,0-20,0 71 8, ,0-30,5 76 9, ,0-40, , ,0-50, , ,0-61, , L 4,0-31, , Percussion rill Bits Metal rill Bits 146 Up to No. 2 iniviual packaging with roun hole From No. 3 iniviual packaging with Euro hole Woo rill Bits 99
33 Hammer rill Bits HSS step rills 325 HSS step rills Percussion rill Bits Metal rill Bits Right-han cutting High-performance high-spee steel Laser marking Two cutters For rilling large holes in thin material an reboring existing holes Steel sheet an stainless steel from 0.1 to 2 mm thick Non-ferrous metals from 0.1 to 5 mm thick Plastic up to 10 mm thick 1 4,0-12, , ,0-20, , ,0-30, , ,0-36, , EC 10 7,0-32,5 96 6, Prouct information 325 HSS step rill Cylinrical rilling For electricians use of cable screw connections accoring to latest European stanar IN EN Applicable for threa an core holes into service cabinets with max. 5,5 mm wall epth Woo rill Bits 146 Up to No. 2 iniviual packaging with roun hole From No. 3 iniviual packaging with Euro hole HSS step rills for electricians rilling region for cable screw connections Cable connection Threa core hole M M12x1,5 M16x1,5 M20x1,5 M25x1,5 M32x1,5 ø 7 10,5 14,5 18,5 23,5 30,5 6mm Through-hole ø 7 12,5 16,5 20,5 25,5 32,5 3mm 100
34 Scriber SW 140 Scriber Hammer rill Bits With carbie tip Chromate surface SW 140 6, Percussion rill Bits Woo rill Bits Metal rill Bits 101
35 Ausfueh Infobox_ Hammer rill Bits HSS hole saw bi-metal 320 HSS hole saw bi-metal Percussion rill Bits Variable tooth splitting for less vibration Less heat prouction Long life High precision of concentric running Smoother cutting Cutting epth up to max. 38 mm Up to Ø 30 mm R 1/4 threa Up to Ø 32 mm R 3/8 threa R = pipe threa ,0 9/ ,0 5/ ,0 11/ ,0 3/ ,0 25/ ,0 13/ ,0 7/ ,0 15/ , ,0 1 1/ Metal rill Bits For iron, steel, nonferrous heavy metal, light alloy, cast iron, plastics, woo, plywoo, plaster boar Pillar rilling machines or lathes 29,0 1 1/ ,0 1 3/ ,0 1 1/ ,0 1 5/ ,0 1 3/ ,0 1 7/ ,0 1 1/ ,0 1 9/ Woo rill Bits Comments = Recommene spee - Wrought Steel 2 = Recommene spee - Cast iron 3 = Recommene spee - Stainless Steel 4 = Recommene spee - Copper Brass 5 = Recommene spee - Aluminium 41,0 1 5/ ,0 1 11/ ,0 1 3/ ,0 1 25/ ,0 1 13/ ,0 1 7/ ,0 1 31/ , ,0 2 1/ ,0 2 1/ ,0 2 3/ ,0 2 1/ ,0 2 5/ ,0 2 3/ ,0 2 1/ ,0 2 9/ ,0 2 5/ ,0 2 11/ ,0 2 3/ ,0 2 7/ ,0 2 31/ , ,0 3 1/ ,0 3 1/ ,0 3 3/ ,0 3 1/ ,0 3 5/ ,0 3 3/
36 Ausfueh Infobox_ HSS hole saw bi-metal 320 HSS hole saw bi-metal Hammer rill Bits Variable tooth splitting for less vibration Less heat prouction Long life High precision of concentric running Smoother cutting Cutting epth up to max. 38 mm Up to Ø 30 mm R 1/4 threa Up to Ø 32 mm R 3/8 threa R = pipe threa For iron, steel, nonferrous heavy metal, light alloy, cast iron, plastics, woo, plywoo, plaster boar Pillar rilling machines or lathes Comments = Recommene spee - Wrought Steel 2 = Recommene spee - Cast iron 3 = Recommene spee - Stainless Steel 4 = Recommene spee - Copper Brass 5 = Recommene spee - Aluminium ,0 3 7/ , ,0 4 1/ ,0 4 1/ ,0 4 3/ ,0 4 1/ ,0 4 3/ , ,0 5 1/ ,0 5 3/ , Locating shank for HSS hole saw bi-metal SW 1 6,35 LS ,50 LS ,00 LS SS-plus 4 LS ,50 LS ,00 LS ,00 LS ,00 LS SS-plus 9 LS Centre rill bit for HSS hole saw bi-metal Woo rill Bits Metal rill Bits Percussion rill Bits 75 6, , Locating shank for HSS hole saw bi-metal SW ,
37 Hammer rill Bits Percussion rill Bits Metal rill Bits HSS hole saw bi-metal Prouct information esigne for long lifetime an high cutting performance Always use the recommene operating spee, spee to be increase slowly till a slight cutting is notice; to avoi overheating, abrasive or breaking out of cutting teeths. cutting-oil Remove regularly rilling chips from the cutting spiral o not use high working pressure an assure that the saw oes really cut. The centre rill must excee the saw teeth by approximate 3-4 mm but no more than the thickness of the workpiece Make sure that the hole saw always is in vertical position to the work piece surface 1 Locating shank, roun Locating shank, AF Centre rill bit Woo rill Bits Hole saw System 320 Bi-metall Quick-rel. locating shank Item numbers for locating shanks of various hole saw manufacturers KEIL American MILFOR Milwaukee RULE SANVIK STARRETT MORSE SAW L A 4 M 24 K L A 1 M L A 11 M L A 3 M 55 P L M 45 P 104
38 Technical information HSS rill bits Working conitions Incorrect technical working conitions frequently lea to breakage of the rill bit or to premature wear of the rilling tool. Our spee table gives recommenations on cutting spees an fee rates. epening on the actual working conitions it may, however, be necessary to etermine iniviual cutting values by means of tests. The cutting values shoul be reuce by 20 to 40 per cent for horizontal holes an for rilling epths which are o not overheat rill bit High-alloy an heat-resistant materials can only be properly cut with the use of coolants, with special cutting zone. or materials with a low tenency to ahesion. Materials forming short chips, such as brass an cast iron, but also plastics, shoul be machine without coolant. the coolant can penetrate properly into the hole. In particular, this must be observe for holes which are three times eeper than the iameter (3 x ø).this also Woo rill Bits Metal rill Bits Percussion rill Bits Hammer rill Bits Correct re-grining The correct tip grin of a rill bit is the basic conition for economic rilling. Thus timely re-grining an, in particular, grining to the correct shape of the cutting eges is essential for uninterrupte prouction. KEIL recommens re-grining with one of the tip grining machines for twist rill bits available in the market, as only these machines ensure the setup for optimum re-grining of the main cutters, cutter corners, lan an chisel eges. Manual regrining is not recommene as this is too imprecise, leas to early nonrecoverable wear of the rill bits an oes not allow accurate holes to be rille. Guielines for the rilling of pilot holes for threae holes, epening on threa quality require for threa rill bit ø. M 3 2,4-2,5 4 3,2-3,3 5 4,0-4,2 6 4,8-5,0 8 6,4-6,8 10 7,9-8,5 12 9,6-10,2 105
METAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationOmslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More informationTechnical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
More informationHKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More information0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation
0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an
More informationDrilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6
tools entring drills N spot drills From page 10-3 Twist drills HSS, HSS/ o, solid carbide From page 10-6 Step drills one drill bits arbide masonry drill Bit tools From page 10-44 ircle cutters T-A Insert
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationhole saws 260 PRECISION TOOLS
HOLE SAWS hole saws G hole saws The new RUKO hssg hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. Suitable for steel (up to 800 N/²) and cast steel,
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationHAMMER DRILL BITS PROFESSIONAL WORK MEANS ECONOMICAL WORK HAMMER DRILL BITS. From Pros for Pros 9
PROFESSIONAL WORK MEANS ECONOMICAL WORK 251 SDS-plus MS5 TURBOHEAD Xpro 12 15 252 SDS-plus W2 TURBOKEIL X-Form 16 253 SDS-plus MS5 TURBOKEIL 17 20 255 SDS-plus MS5 VARIO 21 256 SDS-plus hammer drill bit
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More informationCOMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
More informationThe HSS drill bit range
Bosch Metal Drilling The HSS drill bit range www.bosch-professional.co.uk HSS Drill Bits range overview HSS PointTeQ HSS Ground HSS Impact HSS Cobalt Lifetime Speed Precision Features Fast Drilling in
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More informationYour guide to the right drill bit
Drilling 44 Drilling Overview Bosch Accessories 11/12 Your guide to the right drill bit These information pages are designed to help the user. They describe the correct use of the appropriate power tool
More information10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze
10/2017 Prouct Catalogue BRONZE BARS AN BEARINGS Your first choice in bronze Oy Johnson Metall Ab Your first choice in bronze Oy Johnson Metall Ab casts an machines bronze-alloy plain bearings an machine
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationE1 E81. Stock Indications and Symbols. Boring Bars
1 1 SC- Bar Series... Bar Ientification... Bar Selection Guie... 5 Multifunctional Small Tool Twin eae olers... 1 SC- ne Bottom Facing ne e n S-SCLC / A-SCLC... 1 B-SCLC / C-SCLC... 13 -SCLC... 1 S-SCLP
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More information/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs
9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationVolute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
More informationVariable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationDrills Manufactured to National Aerospace Standards (NAS)
Drills Manufactured to National Aerospace Standards (NAS) Tool Materials Manufactured from premium grades of HSS and HSS-E materials These substrates provide good hot hardness and therefore good tool life
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationThreadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
More information/00 RK INOX 10/16 EN RIVKLE. Stainless steel blind rivet nuts and studs
999000000400 RK INOX 10/16 EN RIVKE tainless steel blin rivet nuts an stus RIVKE tainless steel Contents Page RIVKE tainless steel New prouct range 3 New thin hea esign 4 ubricate RIVKE range 5 RIVKE tu
More informationStandard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
More informationThreadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
More information121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...
group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationDrilling Tools. Drilling Tools
Twist drills Miniature drills Sheet metal drills Spiral countersinks (core drills) Step drills Centre drills Taper pin drills Core drills 1 1.3 1.48 Solid carbide drills Solid carbide tapping Tools Carbide
More informationSCREWS, CHUCKS, RIVETS & DRILL BITS
SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG & SUBMITTALS SUPER SABER SELF SCREWS FOR LIGHT TO MEIUM GAUGE esigne for light-to meium-gauge materials, the Super Saber Point offers one-step fastening.
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationPRODUCT CATALOG MAIN INDEX
ROUCT CATAOG MAIN INEX Contents ages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide rills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 SS Tool Bits, End Mills & Centre rills
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
More informationIndustry. SNR : The Bearing Housings
Inustry SNR : The Bearing ousings Contents Page Bearing ousings n Mounting ccessories 2 ousings 3 Bearings 4 Sealing Systems 6 ubrication 8 Bearing Clearance 10 Mounting Tools 12 Bearing rrangement 13
More informationE2ER/E2ERZ. Reduce Failures From Cutting Oil Ingress. Features. Applications. Patent Pending Heat-Sealing Method
Oil-resistant Proximity Sensors Reuce Failures From Cutting Oil Ingress Fluororesin cable withstans cutting oil Sealing metho eliminates gaps at cable joints Resin filling blocks ingress IP67G* egree of
More informationSLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE
SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Publishe by KMF Kunststoff-Metall-Formteile GmbH Postweg 34-40 -73441 Bopfingen Phone 0736/7001 Fax 0736/7007 E-Mail info@kmf-bearings.e All rights reserve.
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationTrio-Cut Circular Thread Milling Tools
Circular Threa illing Tools ore Ø Threa Page 4 6 x 2 5 9 20 x 7 52-53 22 24 x 20 54 26 30 x 25 55 n 3 Applications with only Tool n Threa illing n Threa illing with Unercut n rill illing n High Efficiency
More informationBluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationSAWBLADES SPINDLE TOOLING
EICATE WEBSITE Trend have created a website for our range of industrial tooling especially for the manufacturing industry. This website offers full product details on our Sawblades, Spindle Tooling, rilling
More informationSTROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
More informationSeries SSG - Compressing & stretching device for the Use in the workshop and construction zone
Compressing and stretching devices Series SSG - Compressing & stretching device for the Use in the workshop and construction zone To manufacture wheel arches, window frames, rain profiles or door edges
More informationStandard program. Drilling tools. ...convincing solutions. Measuring tools, Cutting blades
Standard program Drilling tools Measuring tools, Cutting blades...convincing solutions Twist drills Twist drills DIN 338/HSS type N point angle 118, spiral angle 25-35, Ø-tolerance h 8, of HSS, for drilling
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationMetal Hoses and Expansion joints for Gas Applications
Metal Hoses an Expansion joints for Gas Applications 3356e/1/02/09/2,5 Witzenmann GmbH Östliche Karl-Frierich-Str. 134 75175 Pforzheim, Germany Phone +49 - (0)7231-581 - 0 Fax +49 - (0)7231-581 - 820 wi@witzenmann.com
More informationFOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationGU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
More informationWire-thread inserts. Heavy-duty threads for series or repair
Wire-threa inserts Heavy-uty threas for series or repair The center of excellence for highperformance fastening technology KVT-Fastening is an expert for high-quality fastening applications an offers engineering
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationTAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationCONTROL HANDWHEELS CONTROL HANDWHEELS
CONTROL HANWHEELS 2 ART. 205 TWO SPOKE CONTROL HANWHEEL Reinforce an stabilise polyamie. Oils an greases resistant. HANWHEEL COLOUR: CENTRAL CAP: Grey polyamie (RAL 7035 coe 13). ALTERNATIVE CAP COLOUR:
More informationAir Vent Valve Selection
Selection 1. TA-3 TA-3C TA-2 TA-2C TA-5 TA-5F TA-6 293 294 294 294 293.3 1. 35 TA-11 TA-11L TA-18 TA-18L TA-22 TA-22L TA-16 TA-16CVA TA-16CVS TA-16L TAV-2 TAV-3A 295 295 296 296 297 298 298 297 Steam Oil
More informationHIGH PRESSURE - hydraulic cylinders
SSU - hyraulic cyliners A, type aterial: rotective coating: eium: ax. piston spee : ax. working press.: Carb. steel an cast iron (hea) U,, O, T rimer (option), chromiumplate yraulic oil 0.5 m/s 200 From
More information