VERTEX UNIVERSAL TESTING MACHINE
|
|
- Shon Walters
- 6 years ago
- Views:
Transcription
1 OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials. Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum. APPLICATION : VERTEX Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.
2 Principal of Operation : Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen. Machine consists of : Straining Unit This consists of a hydraulic cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured be reveling the cylinder and ram of any possible side loading by the provision of ball settings. An elongation scale with a minimum graduation of 1, is provided to measure the deformation of the specimen. Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table. The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen. Control Panel : The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder. R.H- 116, Sector 2B, Near Datta Meghe Engineering College, Airoli, Navi Mumbai
3 Power Pack : The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously nonpulsating oil flow. Hence the load application is very smooth. Hydraulic Controls : Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken. Load Indicator System : This system consists of a large dial and a pointer. A duy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded. Pendulum Dynamometer : This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator. Autographic Continuous Roll Load-Elongation Recorder : This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10. Accuracy & Calibration : AII VERTEX Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 :(Part 1) : VERTEX Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 :(Part1): 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.
4 TECHNICAL SPECIFICATION : MODEL - UTN-10 UTN-20 UTN-40 UTN-60 UTN-100 UTN-200 UTN-0 Maximum capacity kn st Measuring Range kn Minimum Graduations kn nd Measuring Range kn Minimum Graduation kn rd Measuring Range kn Minimum Graduations kn th Measuring Range kn Minimum Graduations kn Clearance for tensile at fully descended working piston compression test at fully descended working piston Clearance between columns Ram stroke Straining/piston speeds / (at no load) min Connected load HP V Dimension L X W X H (approx.) 2032 x 1960 x 2032 x 1960 x 2060 x 2180 x 2065 x 750 x 2534 x 2415 x 815 x 2900 x 00 x 1200 x 3600 x 3500 x 1900 x 4550 x Weight approx. kg Standard Accessories For tension test Clamping jaws for flat specimens thickness width R.H- 116, Sector 2B, Near Datta Meghe Engineering College, Airoli, Navi Mumbai
5 10-20 Clamping jaws for round 20- specimens diameter For compression test Pair of compression plates of diameter for transverse test Table with adjustable rollers width of rollers Diameter of rollers Maximum clearance between supports Radius of punch tops 6,12 6,12 12, 16 16, 22 16, 22, 40 50, 75
TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.
MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories
More informationMTS Criterion Series 40 Specifications - Comparative
MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C41.103 C42.503 C43.104 C43.304 C43.504 C44.104 C44.304 Maximum Rated kn 1 5 10 30 50 10 30 Force Capacity lbf 220
More informationJINAN HENGRUIJIN TESTING MACHINE CO.LTD
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer
More informationNODIA AND COMPANY. Model Test Paper - I GATE Machine Design. Copyright By Publishers
No part of this publication may be reproduced or distributed in any form or any means, electronic, mechanical, photocopying, or otherwise without the prior permission of the author. Model Test Paper -
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationProduct Range Modules ROSTA Tensioner Devices
Product Range Modules ROSTA Page 17 14 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationUNIMAT BASIC. Material Testing Machine. for the. Quality Control. with. Software (intern) for Stand Alone Usage
Material Testing Machine for the Quality Control UNIMAT BASIC 050 052 054 056 with Software (intern) for Stand Alone Usage Long-travel feeler-arm extensometer testing equipment for quality management Technical
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationCNC HYDRAULIC PRESS BRAKE HPS SERIES OPTIMUM ACCURACY MACHINE CONFIGURATION TABLE CROWNING SYSTEM
HPS SERIES CNC HYDRAULIC PRESS BRAKE OPTIMUM ACCURACY Linear encoder for ram position measuring CONTROL TECHNOLOGY Two linear encoder (Y1-Y2) are mounted on two sides of machine, they measure the exact
More informationSTRENGTH AND ELONGATION, BREAKING OF WOVEN CLOTH; GRAB METHOD
December 28, 1989 SUPERSEDING METHOD 5100 July 20, 1978 1. SCOPE STRENGTH AND ELONGATION, BREAKING OF WOVEN CLOTH; GRAB METHOD 1.1 This method is intended for determining the breaking strength and elongation
More informationVALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6503 DESIGN OF MACHINE ELEMENTS QUESTION BANK
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6503 DESIGN OF MACHINE ELEMENTS QUESTION BANK Unit -1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS Part-A 1. What are the
More information2016 MODEL INFORMATION
2016 MODEL INFORMATION MODEL NAME KLX110/KLX110L MARKETING CODE KLX110C/D Version: 1 June 2015 Canadian model may not be exactly as shown. OVERVIEW KLX110 MINI-MOTO MANIA: TWO FUN OFF-ROAD PLAYBIKES FOR
More informationTownsend Bearings. Rosta Tensioner Devices. Revision 1
Townsend Bearings Rosta Revision 1 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More information> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
More informationHydraulic Universal Testing Machine
WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine Application: WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine is suitable to test various
More informationLocking Assemblies & Locking Elements
US 01 2016 Locking Assemblies & Locking Elements Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION GMBH
More informationHours / 100 Marks Seat No.
17412 16117 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationEXAMPLES INTRODUCTION
AMEM 316 (AUTO308): Machine Elements I EXAMPLES INTRODUCTION EXAMPLES INTRODUCTION Example 1 (Hamrock p.53) As shown in figure 2.12(a), a 3m long bar is supported at the left end (B) by a 6 ram diameter
More informationPOWER ASSISTED SYSTEM (POWER STEERING)
POWER ASSISTED SYSTEM (POWER STEERING) TILT STEERING COLUMN 1. Tilt Steering Column A: TILT MECHANISM The steering wheel vertical position can be adjusted within a 38 mm (1.50 in) range by using the tilt
More informationForce Measurements in a Small Space. Dynamometers
Force Measurements in a Small Space Dynamometers Ring Dynamometers Measurement of Tensile and Compressive Forces Tiedemann dynamometers, manufactured for more than 60 years, offers high precision instruments
More informationMODEL INFORMATION MODEL NAME: KLX110 MARKETING CODE: KLX110CFF. Version: 5 th June 2014 OVERVIEW P2
MODEL INFORMATION OVERVIEW -----------------------------------------P2 AT A GLANCE--------------------------------------P4 KEY FEATURES-----------------------------------P5 MORE FUN---------------------------------------------------------P5
More informationSPRING TESTING MACHINES OVERVIEW. Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning!
SPRING TESTING MACHINES OVERVIEW Spring testing has been one of the main interests of CADIS Prüftechnik GmbH from our beginning! Starting with retrofitting and improving testing machines of our competitors
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE consolidatedcrane.com Houston, TX 713.641.3330 Max. Lift Capacity: 500,000 lbs Max. Length: 300 ft Max. + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500-II CRAWLER CRANE
More informationConcrete ASTM COMPRESSION TESTER ACCESSORIES
ADR Advanced Digital Readout Menu-driven with simple data entry. Dual input and operating modes. Peak hold and auto stress calculation. RS232C output. Pace deviation bar graph for accurate load rate applications.
More informationPendulum Impact Testing Machine for metal Charpy impact
Pendulum Impact Testing Machine for metal Charpy impact ZBC 2000 Series 150J-750J ZBC2000 Series The model ZBC2000 series pendulum impact tester comes from SANS pendulum impact testing machines series
More informationDESIGN OF MACHINE MEMBERS - I
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DESIGN OF MACHINE MEMBERS - I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions
More informationPrecision Load Cells. The World of Precision Made Force Transducers. A world of experience TEST AND MOTION SIMULATION
Precision Load Cells The World of Precision Made Force Transducers With many years of experience in the Precision Load Cells field, Servotest has been working to develop testing equipment that exceeds
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationVibration damping precision couplings
Vibration damping precision couplings In light of the advantages of elasticity, strength, resilience, and damping effects, elastomer materials are now being used in most areas of mechanical engineering.
More informationLoad Cell for Manually Operated Presses Model 8451
w Technical Product Information Load Cell for Manually Operated Presses 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding
More information«CHARPY» Computerized Pendulum IMPACT TESTERS
«CHARPY» Computerized Pendulum IMPACT TESTERS DIGITAL & COMPUTERIZED models of 300, 450 or 750 Joules capacity 300 J PIC-300/C model 450 J PIC-450/C model 750 J PIC-750/C model ASTM E 23 DIN UNE EN ISO
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationPneumatic Balancers 50 to 2000 lbs (22 to 909 kg) Capacity
The Strength Behind Material Handling Technology Meeting the needs of today s material handling applications requires an ergonomic lift assist that interacts with the operator. The Balancer offers lifting
More informationSCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationDYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system.
DYNAMICS LABORATORY AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. OBJECTIVES: To supplement the principles learnt in kinematics and Dynamics of Machinery. To
More informationRSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication
More informationTEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems.
TEST REPORT Ceram Reference: 121557 (QT21489/2/SL)/Ref: 1.0A Project Title: Tensile and Frictional Tests on the Fast Fit BeamClamp Systems Client: Kee Safety Limited For The Attention of: Mr Phil Higgs
More informationuniversal testing machines page 309
steel 4.1 mechanical testing of steel 4.1.1 4.1.2 4.1.3 4.1.4 universal testing machines page 309 tensile/compression machines page 322 impact strength test page 325 bending test page 327 items page items
More information6.0 SPECIFICATIONS CONTENTS. Calibration. According to factory procedureeeeeeeeeeeeeee Accuracy*
6.0 SPECIFICATIONS Calibration According to factory procedureeeeeeeeeeeeeee Accuracy* ± 1% full scale (FS) or ± 1 graduation on scale Scale diameter 41 mm Temperature range 45 to 115 F (10-45 C) Air humidity
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationAluminium jacks AJS AJH
Aluminium jacks AJS AJH Yale Aluminium hydraulic jacks Capacities from 6,5 to 100 tonnes Aluminium jacks combine light weight with high lifting capacity. The use of high tensile aluminium alloy allows
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationIntroduction. Figure 1: Labeled picture of the Instron 3367 load frame.
Operation of the Instron Tensile Test Machine With an Existing Method in Bluehill 3 Software Introduction by Andrew E. Frerichs, 3/25/11 Michelle Grawe; 10/6/14 Introduction The Instron device is a displacement
More informationHYDRAULIC CRAWLER CRANE CK2500
HYDRAULIC CRAWLER CRANE CK2500 WITH OPTIONAL JIB Max. Lifting Capacity: 250 US Tons Max. Boom Length: 300 ft Max. Boom + Jib Length: 250 ft + 100 ft SPECIFICATIONS FOR CK2500 CRAWLER CRANE The Kobelco
More informationLoad Cells SIWAREX WL230 BB-S SA
Load cell The bending beam load cell is particularly suitable for use in small-scale container and platform scales. The measuring element is a double bending beam made of stainless steel to which 4 strain
More informationMax. Lifting Capacity: 100 US Tons Max. Boom Length: 200 ft Max. Boom + Jib Length: 190 ft + 60 ft
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 100 US Tons Max. Length: 200 ft Max. + Jib Length: 190 ft + 60 ft SPECIFICATIONS FOR CK1000-III CRAWLER CRANE The Kobelco CK1000-III Crawler Crane is designed
More informationEngineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets
CHAIN & PULLEY TENSIONERS Engineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets ENGINEERING DATA TENSIONING TECHNOLOGY Chain & V-Belt Tensioning Roller chains are power transmission
More informationC224-E031A. Autograph AGS-J. Shimadzu Table-top Type Universal Tester
C224-E031A Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions in a compact body! AGS-J Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions
More information3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
More informationTechnical Data Technical Data. 3.1 Views TE Fig. 3 Digging envelope TE2-03
Technical Data 3 3. Technical Data 3.1 Views 2400 4700 TE2-03 Fig. 3 Digging envelope TE 200 15 3 Technical Data 4400 4700 TE2-04 2500 3670 2150 Fig. 4 Tunnel profile 1160 2270 3030 3280 Fig. 5 Transport
More informationOther actuators. Kon Mechatronic Sensors and Actuators Tapio Lantela,
Other actuators Kon-41.3140 Mechatronic Sensors and Actuators Tapio Lantela, Overview of lecture Pneumatics Linear motion with electromagnetic devices - Conversion from rotary motion - Solenoid - Voice
More informationRotary Actuators. The World of Rotary Actuators. A world of experience TEST AND MOTION SIMULATION
Rotary Actuators The World of Rotary Actuators Servotest produces two types of Rotary Actuators; Dual Vane, and Torque rotary actuators. By virtue of their design, both types of actuators, when used continuously,
More informationR10 Set No: 1 ''' ' '' '' '' Code No: R31033
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DYNAMICS OF MACHINERY (Common to Mechanical Engineering and Automobile Engineering) Time: 3 Hours Max Marks:
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More information:46 Pagina 69 Bending
Bending Bending Lever Benders Lever Benders 300 Series Plumbing Benders Designed to bend soft copper tubing to a maximum of 180. Offset cushion grip handles eliminate knuckle cracking. Cat. Model Capacity
More informationINDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts
INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--
More informationDEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING UABMCC01-DESIGN OF MACHINE ELEMENTS QUESTION BANK Prepared By: Dr.S.Prabhakaran, Associate Professor/Mechanical Engg. Unit -1 STEADY STRESSES AND VARIABLE STRESSES
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationWEDGE ACTION GRIPS. Sliding Wedge, Self Tightening Grip, Manual and Pneumatic
WEDGE ACTION GRIPS Sliding Wedge, Self Tightening Grip, Manual and Pneumatic General purpose sliding wedge, self tightening grips supplied with straight cut faces as standard. Two additional face options
More informationServohydraulic Testing Machines for Dynamic Testing UFIB Series
Servohydraulic Testing Machines for Dynamic Testing UFIB Series Capacity: 10-250 kn or more S.a.e. ibertest Made in Europe (Spain) Fabricantes desde 1970 Universal Servo hydraulic Dynamic Testing Machines,.
More informationRemoving and installing toothed belt
Page 1 of 10 Special tools and workshop equipment required Diesel injection pump locking pin -3359- (2x) Pin wrench -T10020- Crankshaft stop -T10050- for engines with circular crankshaft sprocket Locking
More informationLoad Cells Bending beam load cells SIWAREX WL230 BB-S SA
Siemens AG 2018 Load Cells Load cell Measurement characteristic values Rated measuring path h n at E max 0. mm (0.01 in) Rated characteristic value C n 2.0 ± 0.02% mv/v Tolerance D O of zero signal < ±
More informationChapter. Steering System Technology
Chapter 78 Steering System Technology Objectives After studying this chapter, you will be able to: Explain the operating principles of steering systems. Identify the major parts of a steering system. Compare
More informationLoad Cells SIWAREX WL280 RN-S SA
Siemens G 2015 SIWREX WL280 RN-S S Load cell Overview Design The measurement element is a ring torsion spring made of stainless steel. Two strain-gage spirals (DMS) are applied to the upper and lower faces
More informationTESTING/VERIFICATION MANUAL FOR WEIGHBRIDGES
TESTING/VERIFICATION MANUAL FOR WEIGHBRIDGES 1. DEFINITION: A weighbridge shall mean a weighing instrument constructed with compound levers, with the indicator system carried on foundations separate from
More informationMobile Crane LTM Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m
Mobile Crane LTM 11-5.2 Max. capacity: 1 t Max. hoisting height: 84 m Max. radius: 66 m Dimensions Encombrement 37'9" 45'1" 44'9" 12'7" 1'11" 2'5" 6'7" 2'9" E F A K 8' 1" 6' 7'6" 8'2" 5'4" 5'4" 5'5" 5'1"
More informationWESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 260207 & 260208 Note: Operator MUST read and understand these operating instructions before using this. TABLE OF CONTENTS General Information... 2. Description...
More informationCRANKSHAFT GRINDING MACHINES
CRANKSHAFT GRINDING MACHINES 40 years of experience in Crankshaft Grinding Machines. The most complete range from 1.5 meters to 14 meters crankshaft length AZ is the world leader in the production of crankshaft
More informationAssemblies for Parallel Kinematics. Frank Dürschmied. INA reprint from Werkstatt und Betrieb Vol. No. 5, May 1999 Carl Hanser Verlag, München
Assemblies for Parallel Kinematics Frank Dürschmied INA reprint from Werkstatt und Betrieb Vol. No. 5, May 1999 Carl Hanser Verlag, München Assemblies for Parallel Kinematics Frank Dürschmied Joints and
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationTheory of Machines. CH-1: Fundamentals and type of Mechanisms
CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion
More informationSANDNER Messtechnik GmbH
Instruction Manual High Precision Extensometer (Strain Gauge Transducers) SANDNER-Messtechnik GmbH 1 of 31 Release September 2005 Table of contents TENSOMETER-kits and basic units...5 Application and construction...5
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More informationE L L I O T T 14M, 18M & 24M. Contents OPERATORS INSTRUCTION HANDBOOK FOR THE HIGH SPEED SHAPING MACHINES MODELS. Also COMPONENT PARTS LIST.
OPERATORS INSTRUCTION HANDBOOK FOR THE E L L I O T T HIGH SPEED SHAPING MACHINES MODELS 14M, 18M & 24M Also COMPONENT PARTS LIST Contents Page Slinging 2 Examination 2 Cleaning 2 Installation 3 Foundation
More information44.3 kw (59.4 HP) at 2100 rpm kg mm DX85R-3. Compact Excavator
44.3 kw (59.4 HP) at 2100 rpm 8540-8600 kg 4175-4725 mm DX85R-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX85R-3 ideal working
More informationDARSHAN INSTITUTE OF ENGG. & TECH.
DARSHAN INSTITUTE OF ENGG. & TECH. B.E. Semester V Design of Machine Elements (2151907) Batch: Roll No.: List of Assignments Sr. No. Title Start Date End Date Sign Remark 1. Introduction 2. Design against
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationChanges in direction.! Using pulleys with belts
Mechanisms Changes in direction! Using pulleys with belts Changes in direction! Using friction wheels Changes in direction! Using gears Worm drive! Reduces the speed! It is non-reversible Worm drive! Multiple
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More informationAn Introduction to Fatigue Testing Equipment, Test Setup & Data Collection
An Introduction to Fatigue Testing Equipment, Test Setup & Data Collection Lisa Goodwin Servohydraulic Sales Specialist & Market Manager - Instron The difference is measurable 1 Themes.. Certainty of Measurement
More informationACCOUNTING FOR LOST MOTION
Backlash and deflection are critical factors when designing mechanical control cables. Mechanical control cables provide a simple, lightweight, economical, and reliable way to activate throttles, latches,
More informationLaboratory Vane Apparatus SL800. Impact Test Equipment Ltd & User Guide. User Guide
Laboratory Vane Apparatus SL800 Impact Test Equipment Ltd www.impact-test.co.uk & www.impact-test.com User Guide User Guide Impact Test Equipment Ltd. Building 21 Stevenston Ind. Est. Stevenston Ayrshire
More informationHydraulic Jacks & Tools Test rig
ydraulic Jacks & Tools Test rig ydraulic test rig for hoisting equipment model RPYS-1215 Capacity max. 12 t or testing pul-lifts, lever hoists, chain blocks, wire rope pullers as well as other lifting
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationHoisting Equipment Rack & Pinion jacks
Steel jack acc. to DIN 7355 model SJ 1500-10000 Mechanical steel jacks can basically be used to lift almost all kinds of loads in maintenance and repair, ship building, construction as well as agriculture.
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationWESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 272970 & 272973 Note: Operator MUST read and understand these operating instructions before using this Heavy Duty Scissors Lift Table. TABLE OF CONTENTS 1 General
More informationPrecise Measurements in a Small Space. Dynamometers
Precise Measurements in a Small Space Dynamometers Ring Dynamometers Analogue and Digital Force Measurements Tiedemann dynamometers, manufactured for more than 60 years, offers high precision instruments
More information