«CHARPY» Computerized Pendulum IMPACT TESTERS
|
|
- Griffin Rose
- 5 years ago
- Views:
Transcription
1 «CHARPY» Computerized Pendulum IMPACT TESTERS DIGITAL & COMPUTERIZED models of 300, 450 or 750 Joules capacity 300 J PIC-300/C model 450 J PIC-450/C model 750 J PIC-750/C model ASTM E 23 DIN UNE EN ISO TEST CYCLE: - AUTOMATIC Calibration - SPECIMEN COLLOCATION - SAFETY DOOR CLOSING - IMPACT HAMMER AUTOMATIC RELEASE - IMPACT HAMMER ELECTRICAL BRAKE AUTOMATICALLY - IMPACT HAMMER AUTOMATIC RETURN Control Panel DIGITAL Display (Touch Screen) IMPACT / RESILIENCE Tests COMPUTERIZED Soft + Hard Complying with ASTM E 23 - EN ISO ISO standards With 22 PC Touch Screen AUTOMATIC Calibration (obtaining reference angle and friction losses) Each Impact testing machine is supplied with a Calibration Certificate With DIGITAL Touch Screen Control Panel PC 22 Touch Screen included + METROTEST Impact Testing Software With 2 Impact Strikers of 2 and 8 mm of radius Tongs included to handle according to ASTM the specimen at low temperature Metallic Safety Cabinet included with Polycarbonate door to access inside the Impact Tester Safety system to STOP the falling impact hammer in case of accidental electric cut-off supply Control Panel for lifting and releasing of the impact hammer Drum brake system activated AUTOMATIC actuator. Impact hammer return to the starting top position and release for a new impact test by AUTOMATIC motorized system. Specimen dimensions: 10 x 10 x 55 mm Applications: This tester is an ideal equipment for Quality Control Laboratories, Areas of Engineering, Universities, and Research Institutes 1
2 BRIEF INTRODUCTION: An impact machine is used to determinate the energy absorbed in the fracture of a standard metal simple hitting at high speed. This DIGITAL and COMPUTERIZED model can work almost automatically, you can launch the impact hammer in 2 ways once the Polycarbonate door has been closed: - Pressing REALEASE in the control panel (if the AUTO RELEASE is deactivated = OFF) - AUTOMATIC Fall when the door is closed (if the AUTO RELEASE is activated = ON) After breaking the sample, the impact hammer is automatically brake and after stopping it starts to raise the impact hammer to its initial position also in an automatic mode. With the Impact Tester, it is delivered an Impact Hammer of: Joules of capacity with the PIC-300/C model (Weight of the impact hammer suspended and fixed to the main rotating axis = 20,4 Kg (200 N) Joules of capacity with the PIC-450/C model (Weight of the impact hammer suspended and fixed to the main rotating) = 30,6 Kg (300 N) Joules of capacity with the PIC-750/C model (Weight of the impact hammer suspended and fixed to the main rotating =) 51 Kg (500 N) The entire pendulum is protected with a closed safety to carry out the tests with great protection for the user, with a safety door. Features: High stiffness of the loading frame and of the base to guaranty the stability. A Control Panel Box activate the machine Specimen Support Specimen height Top Specimen width Specimen lenght Specimen support Impact center Scheme collocation area of the test specimen STRIKING HEAD (Impact Hammer) Impact Stricker 2
3 Selection menu of the calculations that are wished to obtained in the test Statistics included METROTEST Impact Software Tolerances Comparative Bar Graph Gauss Bells 3
4 Features PIC/C Impact testers series: Maximum Impact Energy: Maximum Impact speed: 300J 450 J or 750 J according to the model 5.42 m/s Angle: 150º Distance between centers of pendulum and sample: Distance between supports: Angle radius of the grips: Angle radius of the edge: Impact angle of the edge blade: 30º Thickness of the impact blade: Resolution impact energy reading: 800mm 40mm R1-1.5mm R2-2.5mm 16mm Dimensions Impact Tester without safety cabinet 860 mm x 660 mm x 1250* mm (W x D x H) (*with the impact hammer down) 860 mm x 660 mm x 2050* mm (W x D x H) (*with impact hammer up) Dimensions Impact Tester with safety cabinet 2150 x 700 x 2150 mm (W x D x H) 0,1 J Weights(Kg): Power: Consumptions: Dimensions of the sample: 650 Kg PIC-300/C model (300 Joules) 720 Kg PIC-450/C model (450 Joules) 900 Kg PIC-750/C model (750 Joules) AC 110V or 220v, single-phase 50 or 60 Hz 500 W PIC-300/C model 750 W PIC-450/C model 1000 W PIC-750/C model 10 x 10 x 55 mm Work Conditions: a/ Room Temperature: +10ºC to +35ºC b/ Relative Humidity: 85% c/ Around the pendulum without corrosive environment d/ Installation over concrete base, thickness no minor to 300 mm. e/ The leveling over a plane of base of the machine is 0.5/1000. ROBUST TEST FRAME With two supports Metal Plate METAL PLATE FOR LEVELING (Included in the standard delivery) To facilitate the leveling of the Charpy pendulum on the foundation soil, it is placed separately first a metallic plate, it is leveled and it is then fixed on the Charpy pendulum. 4
5 CONTENT QUANTITY IMAGE Test Frames: PIC-300/D 1 Set PIC-450/D PIC-750/D Impact hammer of 300, 450 or 750 Joules Tool for installation of the specimen in the center: Impact Striker R= 2 mm Impact Striker R= 8 mm Tongs to handle according to ASTM the specimen at low temperature Anchor nuts and screws 4 bolts of M16 and 4 screws M20 1 Set PC Touch Screen with 20 monitor 1 Unit Impact Testing Advanced SOFTWARE 5
6 Scheme of the Safety Cabinet OPTIONAL: KIT Adaptation for IZOD tests * reserves the right to do any technical modification without advance notice 6
7 MOTORIZED NOTCHER To make proper notches in U and V in the different samples Charpy and Izod this machine was designed. It is provided with a cutting brush of multiple teeth to effectuate a fast and clean preparation of test samples. The machine is built in a robust construction, independently and with a single-phase engine for its use. The cutting brush is mounted over a trolley which is moved by a patron screw along all the stroke. It is provided of guides that ensure the alignment of the brush with a superior plate of the machine, making only as a fixing, a small pressure of a manual drive. It has a gradual stop to ensure the positioning of the notch in all the samples and a stop screw to fix the end of the notch. It has limit fixer in each end of the stroke of the machine, using the unique command for the starting-up of the cutter inversion and its stop. It can make notches in square samples of 10 mm according to the standard EN and ASTM E23. The dimensions of the machine are 381 mm x 381 mm x 1120 mm. The dimensions of the machine are 400 x 400 x 1270 mm. Approx. Net Weight.: 100 Kg Dimension of the Box Transport: 450 x 450 x 1320 mm. Approx. Gross Weight: 140 Kg Power Supply: 110 V or 220 V single-phase 50 or 60 Hz MANUAL NOTCHER Very easy to fix in a working table thanks to its robust, but simple construction. The cutting tool is guided through a square section which moves downwards through the main unit in the interior of the machine with a mechanic zip that slides upwards and downwards when a wheel is turned. This notcher is very easy to use and simple to maintain. It makes in a very short period many notches in V and U in samples for Charpy and Izod test by a cutting brush of multiple teeth according to EN and ASTM standard. The dimensions of the machine are 200 x 200 x 500 mm. Approx. Net Weight.: 16 Kg Dimension of the Box Transport: 250 x 250 x 550 mm. Approx. Gross Weight: 220 Kg Cutting knife in U and V size for Charpy Test NOTE: Standard supply, does not include cutting brushes 7
Pendulum Impact Charpy PIT Series Type C 450J
Do Our Best for Your Test Pendulum Impact Charpy PIT Series Type C 450J Damper Buffering design reduces vibrations when locking the pendulum, lowering the noise and improving durability Striker Designed
More informationPendulum Impact Testing Machine PIT452G 450J
Do Our Best for Your Test Pendulum Impact Testing Machine PIT452G 450J Description WANCE offers PIT452G pendulum impact testing machine designed for determining the impact resistance of metallic materials
More informationPendulum Impact Tester PSd 50
Pendulum Impact Tester PSd 50 034297 1435-10 WPM Werkstoffprüfsysteme Leipzig GmbH Nordstraße 15 04416 Markkleeberg Germany Phone: +4934297 1435-0 Fax: +4934297 1435-10 Email: info@wpm-leipzig.de Internet:
More informationPendulum Impact Testing Machine for metal Charpy impact
Pendulum Impact Testing Machine for metal Charpy impact ZBC 2000 Series 150J-750J ZBC2000 Series The model ZBC2000 series pendulum impact tester comes from SANS pendulum impact testing machines series
More informationPendulum Impact Testing Machine
Pendulum Impact Testing Machine CHARPY CBD Series Features Touch screen operation console. Automatic detect instant raised angle of pendulum. Automatic detect friction force and air resistance and correct
More informationPendulum Impact Tester PSd 450
WPM WPM Werkstoffprüfsysteme Leipzig GmbH Nordstraße 15 04416 Markkleeberg Germany Phone: +4934297 1435-0 Fax: +4934297 1435-10 Email: info@wpm-leipzig.de Internet: www.wpm-leipzig.de WPM Werkstoffprüfsysteme
More informationHIT Pendulum Impact Testers from 5 to 50 Joule
HIT Pendulum Impact Testers from 5 to 50 Joule Intelligent Testing FP 573 2.0109 1. The Pendulum Impact Testers from Zwick are a HIT Important Characteristics Leading mechanical testing products manufacturer
More informationElcometer 506 Pull- Off Adhesion Gauge. elcometer.com 1
Elcometer 506 Pull- Off Adhesion Gauge elcometer.com 1 Elcometer 506 STANDARDS: ASTM D4541, ASTM D7234, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 12636, EN 13144, EN 1542, EN 24624, ISO 16276-1, ISO
More informationElcometer 506 Pull- Off Adhesion Gauge. Product Brochure/Flyer. 506 PAT Adhesion Tester
Product Brochure/Flyer Elcometer 506 Pull- Off Adhesion Gauge elcometer.com 1 Copyright 2016 Burwell Technologies For more information: 1300 287 935 / mail@burwell.com.au / www.burwell.com.au Elcometer
More informationVERTEX UNIVERSAL TESTING MACHINE
OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of
More informationVertical Tensile Machine
Vertical Tensile Machine Code: 11.202.100 For the determination of force, tensile resistance, elongation and tensile energy absorption (TEA) in paper or tissue. Standards: ISO 1924-1, ISO 1924-2, ISO 1924-3,
More informationThe FMM force tester can be controlled using L1 software for limit, cycling, hold and coefficient of friction testing.
FMM FMM may be used with L1 software or with a Starrett DFC or DFG digital force gage. FMM digital force testers are compact and ideal for highvolume, lean manufacturing production. FMM testers are available
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationuniversal testing machines page 309
steel 4.1 mechanical testing of steel 4.1.1 4.1.2 4.1.3 4.1.4 universal testing machines page 309 tensile/compression machines page 322 impact strength test page 325 bending test page 327 items page items
More informationRegistered in England number Wherever in the world quality matters. Slipperiness Resistance testing (ISO /DIN 51130/DIN 51097)
Slipperiness Resistance testing (ISO10545-17/DIN 51130/DIN 51097) Contents Pendulum Pages 1-3 Tortus Pages 4-5 Pull Meter Pages 6-7 Ramp (DIN) Page 8-10 Pendulum Overview The Wessex Pendulum Skid Tester
More informationMTS Criterion Series 40 Specifications - Comparative
MTS Criterion Series 40 Specifications - Comparative Model 41 Model 42 Model 43 Model 44 C41.103 C42.503 C43.104 C43.304 C43.504 C44.104 C44.304 Maximum Rated kn 1 5 10 30 50 10 30 Force Capacity lbf 220
More informationAUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405
AUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405 PRODUCT DESCRIPTION The TQC Automatic film applicator provides a reliable basis to apply coating films to test
More informationZwick. Materials testing. Product Information LTM 5/10 electro-dynamic testing machine
CTA: 113389 113384 testing machine Range of application The LTM is an electro-dynamic testing machine with a drive based on linear motor technology. 's new, patented drive concept enables the LTM to be
More informationTex-614-J, Testing Epoxy Materials
Overview Effective: August 1999 May 2000. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification DMS-6100, Epoxies and Adhesives. The test to be
More informationEMC Research Institute
EMC Research Institute 66-6, Jeil-Ri, Yangji-Myeon, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, Korea Tel : 031-679-9687, Fax : 031-335-9786 Certificate No: ERI-0803070810 Page ( 1 ) of ( 15 ) 1. Client Name :
More informationVIBRATION AND MECHANICAL SHOCK TEST REPORT
Report No. :DH1701190024A-1 Version:A VIBRATION AND MECHANICAL SHOCK TEST REPORT Company :OTO Photonics Inc. Address :9F-5,No. 27, Guanxin Rd., East Dist., Hsinchu City 30072, Taiwan(R.O.C.) Sample Name
More informationTLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS
A brand of TLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS TECHLAB SYSTEMS, S.L. is a company which specialises in designing, developing, manufacturing and marketing advanced technologies
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationAUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405
AUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405 PRODUCT DESCRIPTION The TQC Automatic film applicator provides a reliable basis to apply coating films to test
More informationTex-614-J, Testing Epoxy Materials
Overview Effective Date: January 2001 - July 2002. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification "DMS-6100, Epoxies and Adhesives." The
More informationCFA. Carton Force Analyser
CFA Carton Force Analyser Measure all the forces required to erect cartons Increase the running speed of carton packaging Eliminate rejections and reduce waste CFA Carton Force Analyser INCREASE THE RUNNING
More information3. Operating instructions: Minor 200
1. Technical specifications 3. Operating instructions: Minor 200 Copyright 2015 by Endecotts Ltd. 13 1. Setting up Technical specifications SIEVE SHAKER MODEL: Minor 200 General Information The Minor 200
More informationHumidity Cabinet HYGROTHERM
Humidity Cabinet for humidty tests with international standards Humidity Cabinet HYGROTHERM 519 529 HYGROTHERM also available as semi-automatic or fully-automatic version (Mod. 519 SA / 519 FA) HYGROTHERM
More informationOur test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
More informationCyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
More informationSAVANNAH GEORGIA USA
EK240 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with
More informationBeissbarth MLD 815. Digital headlight measurement and adjustment. TÜV-certified (prototype technical release) Cross and alignment laser
Headlight Testing Beissbarth MLD 815 Digital headlight measurement and adjustment TÜV-certified (prototype technical release) Cross and alignment laser CMOS camera for real-time image processing Integrated
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationSAVANNAH GEORGIA USA
EK250 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with
More informationToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
More informationChicago Pneumatic Construction Tools
Chicago Pneumatic Construction Tools Chipping Hammers, Clay Diggers, Demolition Picks and Busters Built to last Hammers, Picks and Clay Diggers Key features CP 0012 handle based on the famous CP 0009 design
More informationTQC AUTOMATIC FILM APPLICATOR
TQC AUTOMATIC FILM APPLICATOR The TQC Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate
More informationLinear Flexible Joint Cart Plus Single Inverted Pendulum (LFJC+SIP)
Linear Motion Servo Plants: IP01 and IP02 Linear Flexible Joint Cart Plus Single Inverted Pendulum (LFJC+SIP) User Manual Table of Contents 1. Linear Flexible Joint Cart Plus Single Inverted Pendulum System
More informationRestaurants - Caterers - Delicatessens
power MIXERS NEW Restaurants - Caterers - Delicatessens "All Robot Coupe Power Mixers have One Year "No Hassle" Replacement Warranty" COMPACT CMP MINI 7 7 8 10 8 7 10 10 10 8 16 MicroMix 160 VV 190 VV
More informationTABLE OF CONTENTS 1. FEATURES SPECIFICATIONS... 1
TABLE OF CONTENTS 1. FEATURES... 1 2. SPECIFICATIONS... 1 3. FRONT PANEL DESCRIPTIONS... 3 3-1 Display...3 3-2 Power Switch... 3 3-3 ma ( Red ) Input Terminals...3 3-4 COM ( Black ) Input Terminals...3
More informationIMPACT TESTER BEVS 1601 User Manual
IMPACT TESTER BEVS 1601 User Manual Version 201412 This manual shall be read carefully before starting. Directions included in this operation manual shall be strictly followed. PAGE 1 1 Company Profile
More informationCement Compression & Flexural Testing Machines
The Compression & Flexural testing product line from Torontech offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual
More informationAutomAtic Strength tester AUTODYN
Automatic Strength TESTER AUTODYN AUTODYN Automatic Strength Tester Description Automatic Strength Tester, up to 24 positions, for testing the tensile strength of yarns. It can also test yarns, hanks and
More informationThree axis ( X, Y, Z ) electromagnetic field measurement 3 D EMF TESTER. Model : EMF-828
Three axis ( X, Y, Z ) electromagnetic field measurement 3 D EMF TESTER Model : EMF-828 TABLE OF CONTENTS 1. FEATURES...1 2. APPLICATIONS...2 3. CAUTION OF ELECTROMAGNETIC FIELD EXPOSURE... 2 4. SPECIFICATIONS...
More informationTHE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design
More informationConfig file is loaded in controller; parameters are shown in tuning tab of SMAC control center
Measuring Forces Force and Current limits on LCC The configuration file contains settings that limit the current and determine how the current values are represented. The most important setting (which
More informationDOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER)
Qualitest USA LC, Toll-Free: 1.877.884.TEST, Fax: 954.697.8211, E-mail: info@qualitest-inc.com DOLI's STANDARD COMPRESSION FLEXOMETER (GOODRICH FLEXOMETER) Basic System The measurement is based on ISO
More informationBRIDGE CUTTING MACHINE Model HTO- 1200
BRIDGE CUTTING MACHINE Model HTO- 1200 GENERAL DESCRIPTION The bridge cutting machine HTO -1200+ is designed to process of one or multiple superposed slabs of granite, marble, etc. It can be used in completely
More informationSITRANS F flowmeters. SITRANS F R Meters for lubricating oils (distribution of mineral oils) 4/350 Siemens FI Overview
(distribution of mineral oils) Type For custody transfer use Not for custody transfer use Flow rate in l/min (USgpm) Flow rate in l/min (USgpm) Minimum Maximum Minimum Maximum Pistol-grip meter Without
More informationProduct Information. Mflow extrusion plastometer
CTA: 168424 169603 PI 781 0918 Applications As the volume of testing increases, so does the need for a greater degree of automation (compared to Cflow). Mflow is capable of modular expansion and can be
More informationF 427/3 Strength Tester for Yarns, Hanks and Fabrics
F 427/3 Strength Tester for Yarns, Hanks and Fabrics In its basic form the F 427/3 Strength Tester has since its introduction proved its worth with clients throughout the world. Its various testing programmes
More informationUSED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors
TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological
More informationAdhesion - Pull-Off. Elcometer 510. Automatic Adhesion Gauge 1.
Elcometer 510 Automatic Adhesion Gauge 1 Elcometer 510 STANDARDS: ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS 1580.408.5, BS 1881-207, DIN 1048-2, EN 1015-12, EN 12636, EN 13144, EN 1542, EN 24624, ISO
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description HR3200C, HR3210C, HR3210FCT Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS HR3200C series models have been developed as successor models of HR3000C,
More informationFIRST FOR PORTABLE PARTICLE COUNTING
FIRST FOR PORTABLE PARTICLE COUNTING FS9V2-RH & FS9V2-RH-HP - particulate and relative humidity monitoring The FS9V2-RH Particle Pal displays live cleanliness readings for particulate (ISO/NAS/SAE) and
More informationTE 88 MULTI-STATION FRICTION & WEAR TEST MACHINE
TE 88 MULTI-STATION FRICTION & WEAR TEST MACHINE Background The TE 88 Multi-Station Friction and Wear Test Machine is design for wear testing of materials under high contact pressures in pin on disc, block
More informationElectric Wire Rope Hoists MH and MHM Types
Electric Wire Rope Hoists MH and MHM s 0 WIRE ROPE ELECTRIC HOISTS Lifting capacity from 2 up to 32 000. More than 2 000 000 wire rope electric hoists of the well known "T" series have been sold by Balkancarpodem
More informationMorehouse Instrument Company
The Morehouse Universal Calibrating Machine is designed to use a compression force standard, proving ring or load cell to calibrate units under test in compression and tension. The reference standard and
More informationCompression/Tension Testing Machines
Manual Cement Compression and Flexure Testing Machines UTCM-6310/UTCM-6410 The UTCM-6310 and UTCM-6410 single and double testing chamber Manual compression and flexure testing machines are designed to
More informationAtlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity
Atlas Copco Cobra petrol drill and breakers Multi-purpose tools for higher productivity Cobra a reliable team mate The Cobra machine has been building up a loyal fanclub since it was first launched in
More informationCODE 10 OECD STANDARD CODE FOR THE OFFICIAL TESTING OF FALLING OBJECT PROTECTIVE STRUCTURES ON AGRICULTURAL AND FORESTRY TRACTORS
CODE 10 OECD STANDARD CODE FOR THE OFFICIAL TESTING OF FALLING OBJECT PROTECTIVE STRUCTURES ON AGRICULTURAL AND FORESTRY TRACTORS 1 TABLE OF CONTENTS INTRODUCTION... 3 1. DEFINITIONS... 3 1.1 Agricultural
More informationInstruction Manual. Coating Thickness Gauge. Optionally with Memory
Instruction Manual Coating Thickness Gauge 1500 Optionally with Memory 1 Introduction The QNix 1500 is a part of the product line of non-destructive coating thickness measurement gauges manufactured by
More informationInstruments for the Analysis of Petroleum Products. Oxidation Stability
Instruments for the Analysis of Petroleum Products Oxidation Stability What is Oxidation Stability? Oxidation stability describes the resistance of a material towards oxygen. This is a basic requirement
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationMass Comparators Advanced Radwag solutions for traceability of measurement
Mass Comparators Advanced Radwag solutions for traceability of measurement Automatic Mass Comparators COMPARISON OF 1 mg 1000 g WEIGHTS OF CLASS E1, E2, F1, F2, M1 AND M2 Automatic Mass Comparators UMA
More informationPoints of strength. 63F, availability of two drilling heads, with possibility fo horizontal and vertical drilling devices.
CNC GIOTTO 1 Points of strength Technology EASY USE, easy to use and simple to MOUNT TOOLS Machine ready for use and complete with standard tool support store and CAD station Suction cups made of aluminium
More informationProfessional Brochure of Machines and Diamond Tools for Construction
Professional Brochure of Machines and Diamond Tools for Construction INDEX 3 Drilling Selection chart for drilling machines P. 4 Drilling motors P. 5 / 7 Core drill stands P. 8 / 9 SDR 5 drilling stand
More informationPneumatic Balancers 50 to 2000 lbs (22 to 909 kg) Capacity
The Strength Behind Material Handling Technology Meeting the needs of today s material handling applications requires an ergonomic lift assist that interacts with the operator. The Balancer offers lifting
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationROLLER GATES. Waterman Industries of Egypt. Roller gates are nominated for heavy duty service where large loads and sizes are going to be encountered.
ROLLER GATES Roller Gates are ideally suited for controlling water in any large openings such as may be found in power plants, water and sewage treatment facilities, flood control projects, irrigation
More informationIntroduction to Torque Calibration
Introduction to Torque Calibration Calibrate THE IMPORTANCE OF TORQUE CALIBRATION Regular Torque Tool calibration guarantees repeated accuracy and adherence to International Standards. Calibration also
More informationAUTOMATED TORSION BENCH DRIVETWIST
Force and torque measurement systems AUTOMATED TORSION BENCH DRIVETWIST ANDILOG Technologies info@andilog.com Phone : +33 (0) 820 888 202 Fax : +33 (0) 820 888 902 Automated torsion bench DRIVETWIST Automated
More informationRailing System BH-02
Railing System BH-02 ASSEMBLY AND OPERATION MANUAL Railing System BH-02 Assembly & Operation Manual CONTENTS 1 APPLICATION...3 2 OPERATION CONDITIONS...3 3 TECHNICAL SPECIFICATIONS...4 4 DELIVERY SET...4
More informationSTEEL UNIVERSAL TESTING MACHINE 18.1 TENSILE/COMPRESSION MACHINE 18.2 IMPACT STRENGTH TEST 18.3 BENDING TESTS 2.4
STEEL 18 UNIVERSAL TESTING MACHINE 18.1 TENSILE/COMPRESSION MACHINE 18.2 IMPACT STRENGTH TEST 18.3 BENDING TESTS 2.4 INDEX ITEMS PAGE Alternate folding testing machine... 496 Bending and straightening
More informationTurbidity and Suspended Solids Transmitter
Data Sheet 5.1 We reserve the right to continuously improve our products and make any change in the stated specifications and dimensions without prior notice. DK: NO: SE: NL: USA: AUS: +45 45 56 06 56
More informationCEAST - HDT & VICAT. Thermal Testing Instruments
CEAST - HDT & VICAT Thermal Testing Instruments HDT/VICAT TESTING Thermal Testing on Plastics Why? To characterize the material at high temperatures HDT Test Vicat Test 2 HDT/VICAT TESTING Vicat standards
More informationSizing criteria for cylinders and servocylinders
www.atos.com Table B15-15/E Sizing criteria for cylinders and servocylinders 1 SWC Cylinders Designer SWC is a smart software for fast and efficient design of Atos hydraulic Cylinders & Servocylinders,
More informationLINEAR ACTUATORS. Type SL 95 / SL 80 / KL 95 up to 12,000 N with high protection class (IP)
LINEAR ACTUATORS Type SL 95 / SL 80 / KL 95 up to 12,000 N with high protection class (IP) moving As one of the leading manufacturers of electrical and electronic drive components and systems we offer
More informationWet Abrasion Scrub Tester
Wet Abrasion Scrub Tester BEVS 2805 User Manual Version V3.201704 This manual shall be read carefully before starting. Directions included in this operation manual shall be strictly followed. PAGE 1 Content
More informationMaterial Specification PVC valves shall meet ASTM D1784 cell classification 124 standards. CPVC valves shall meet ASTM D1784 cell classification 23447
Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationAKVdiesel. Automated kinematic Viscometer key features. Fully complies with ASTM D445. Two measuring positions. Remove cap and pour in sample
Suitable for measuring gas oils, distillate fuels and diesel fuels, as specified in ASTM D975, EN590 and ISO 8217 (marine fuels). The RHEOTEK AKV-diesel is a fully automated viscometer system suitable
More informationPCE-CS 300. Crane Scales up to 300 kg ( 661 lb)
300 Crane Scales PCE-HS N Series Crane Scales up to 150 kg ( 330 lb) powered by 3 x AA 1.5 V batteries auto power off (can be deactivated) PEAK and Hold functions / multiple taring animal weighing function
More informationMANUAL R-130 / R-135
MANUAL R-130 / R-135 CONTENTS 1. DESCRIPTION 2 2. SPECIFICATION 3 3. MEASUREMENT PARAMETERS 4 4. FEATURES 5 5. BATTERY INSTALLATION /REPLACEMENT 6 5.1 Controls and digital display 6 6. CALIBRATION 7 7.
More informationServo-hydraulic Universal Testing Machine HUT Type D
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Test standards BS 8110: PART 1: 1997 3.12.8.16.2 BS4482 BS4483 BS4449 ASTM A 1034:
More informationRoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features
Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
More informationELECTROSPINNING FROM THE LABORATORY. Produced by the Biomedical Division of Linari Engineering S.r.l..
ELECTROSPINNING FROM THE LABORATORY Produced by the Biomedical Division of Linari Engineering S.r.l.. Visit the website www.linaribiomedical.com to discover the other products RTColl.2En Ed. 11/2010 1
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More information832 Series: Sulfur/Carbon Analysis by Combustion
832 Series: Sulfur/Carbon Analysis by Combustion Delivering the Right Results 832 Series: Sulfur/Carbon Analysis by Combustion LECO's 832 Series will redefine the way you determine carbon and sulfur in
More informationTABLE OF CONTENTS 1. FEATURES CAUTION OF ELECTROMAGNETIC FIELD EXPOSURE SPECIFICATIONS...2
TABLE OF CONTENTS 1. FEATURES...1 2. APPLICATIONS...1 3. CAUTION OF ELECTROMAGNETIC FIELD EXPOSURE...1 4. SPECIFICATIONS...2 5. FRONT PANEL DESCRIPTION... 3 5-1 Display...3 5-2 EMF Sensor Position...3
More information2015 www.vigor-equipment.com EN-DINAR Valid until March 1, 2015 Socket Set V74, EAN 40477280741 c L M N 6 2 2 X Design i size 12 x A c 6 4 4.5 5 5.5 6 7 8 9 10 11 12 1 2 x L L F PH 1 PH 2 2 x L M F PZ
More informationConfig file is loaded in controller; parameters are shown in tuning tab of SMAC control center
Forces using LCC Force and Current limits on LCC The configuration file contains settings that limit the current and determine how the current values are represented. The most important setting (which
More informationUnderfloor Wheel Lathe Type U CNC-controlled machine with automatic measuring system
Underfloor Wheel Lathe Type U 2000-150 CNC-controlled machine with automatic measuring system...technology in motion Operative range and scope of application The modern underfloor wheel lathe does not
More informationMAS, MAS.1 weighing modules
MAS, MAS.1 weighing modules Series of professional electromagnetic modules of high resolution ensures highly precise and fast measurement in laboratory. MAS.1.Y MAS.1.R MAS.1 MAS Features High Resolution
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationtest with confidence HV Series TM Test Systems Hydraulic Vibration
test with confidence HV Series TM Test Systems Hydraulic Vibration Experience. Technology. Value. The Difference. HV Series TM. The Difference. Our philosophy is simple. Provide a system designed for optimum
More informationHydraulic Universal Testing Machine
WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine Application: WAW-E Series Computer-Controlled Electro-hydraulic Servo Universal Testing Machine is suitable to test various
More information