Instrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999
|
|
- Toby Williams
- 5 years ago
- Views:
Transcription
1 Instrument Pipe & ISO Conversion ittings Catalog 4260 Revised, ebruary 1999
2 Instrument Pipe ittings Instrument Pipe ittings Introduction Parker Instrumentation Pipe ittings are designed as leakfree connections for process, power, instrumentation and general plumbing applications. They are manufactured to the highest quality standards and are available in broad ranges of sizes, materials and configurations. Parker Instrumentation Pipe fittings are made at the Instrumentation Connectors ivision of Parker annifin in untsville, Alabama where strict adherence to quality control programs are maintained. These quality standards are incorporated in a total efficiency program called Parker Targets. The Parker Targets Program is a measure of the efficiency with which the company transforms materials, employee efforts, machinery and information into customer-satisfying products and services. Consequently, Instrumentation Pipe fittings as products of Parker Targets effectively guarantee to customers that they are receiving the highest quality fittings available. Material Parker Pipe ittings are standard in steel and brass. Other materials may be special ordered within the Parker Quick Response epartment. Straight fittings are manufactured from applicable ASTM bar stock specifications shaped fittings are manufactured from close grain forgings. ISO Conversion ittings Introduction Parker ISO Conversion ittings are designed to the highest quality standards to allow connections between components and systems which use both NPT and ISO Thread configurations. Conversion fittings are maintained under strict quality control programs. esign Parker ISO Conversion ittings are designed to the most commonly used ISO thread forms. These thread forms are used where pressure tight joints are either made on threads utilizing a thread sealant or where pressure tight joints utilize a peripheral seal on the face of the mating component. Material Parker ISO Conversion ittings are standard in stainless steel and brass. Other materials may be special ordered within the Parker Quick Response epartment. Straight fittings are manufactured from applicable ASTM bar stock specifications shaped fittings are manufactured from close grain forgings. ARNING AILUR, IMPROPR SLCTION OR IMPROPR US O T PROUCTS AN/OR SYSTMS SCRIB RIN OR RLAT ITMS CAN CAUS AT, PRSONAL INJURY AN PROPRTY AMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale. Copyright 1999,. All Rights Reserved
3 Instrument Pipe ittings Visual Index Pipe ittings MLN Male ex Long Nipple page 5 MCN Male Close Nipple page 5 RA Adapter page 5 MN Male ex Nipple page 6 C emale ex Coupling page 6 emale lbow page 8 V emale lbow 45 page 8 S Street lbow page 8 SV Street lbow 45 page 9 T emale Tee page 9 MT Male Tee page 10 X emale Cross page 11 CP Pipe Cap page 11 P ex ead Plug page 11 P ollow ex Plug page 12 P5ON ollow ex Plug page 12 5OG5 Straight Thread Reducer/xpander page 13 GOA Male SA Straight Thread to emale NPT Thread page 13 Male Connector to SA Straight Thread page 13 RB Reducing Bushing page 7 M Male lbow page 7 ST Street Tee page 9 MBT Male Branch Tee page 10 Straight Thread Adapters P5ON ex ead Plug page 12 Thread and Tube nd Size Charts page 27, 28, 29 ngineering Report eat Code Traceability page 30 Visual Index for ISO Conversion ittings on page Instrumentation Connectors ivision untsville, Alabama
4 Instrument Pipe ittings eatures and Technical ata Parker Instrument Pipe ittings are precision machined from forgings for elbows, tees and crosses and from bar stock for straight connectors. They are designed to be used for process control and instrumentation connections between pipe sizes and tube sizes. eatures Quality engineered for instrumentation applications Packaged in sealed, clear plastic shrink wrapped boxes for cleanliness orking pressures calculated in accordance with Power Piping Code ANSI B31.1 and Refiner Piping Code ANSI B31.3. All pipe threads are National Pipe Taper (NPT) and exceed the requirements of ANSI B Rolled male threads for extra strength Straight bodies machined from applicable ASTM bar stock specifications Shapes machined from close grain forgings Size ranges from 1/16" through 2" NPT Materials 316 Stainless Steel, Brass and Steel. (Other materials by special order) All exposed threads protected to prevent damage Nomenclature Parker Instrument Pipe ittings part numbers are constructed from symbols that identify the size and style of the fitting and material used. xample: The part number shown below is for a male hex nipple for 3/8" NPT male pipe and 1/4" NPT male pipe in 316 stainless steel. Pipe imensions Pipe Size N.P.T. Pipe Thread R Ref. 1/16 1/ /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ / /4 1-1/4 11-1/ /2 1-1/2 11-1/ / R N.P.T. PIP TRA R. NPT Threads The National Pipe Taper (NPT) thread has a thread flank angle of 60 inclusive, and is mainly used in the petrochemical and process industries. NPT National Pipe Taper threads for connections where pressure-tight joints are made on the threads utilizing a thread sealant. Generic Thread MAJOR IA. PITC LANK ANGL MINOR IA. PITC IA. ow To Order 6 4 MN SS 1st nd 3/8" NPT Male Pipe 2nd nd 1/4" NPT Male Pipe itting Type Male ex Nipple Material 316 SS Parker Instrument Pipe ittings are ordered by part number as listed in this catalog. Size: Pipe thread sizes are designated by the number of sixteenths of an inch. (3/8 NPT pipe=6/16=6) Thread Type: All pipe threads are National Pipe Taper (NPT) unless otherwise designated. Straights and lbows: Call out the largest pipe end first followed by the smaller pipe size. See MN example on page 6. Tees and Crosses: or tees that are the same pipe sizes on all ends the size designation is as follows: T-B would be a 3/8" NPT emale Tee in brass. A 1/4" NPT emale Cross in 316 SS would be a 4 X-SS If a reducing tee or cross were specified, each size must be in sequence. irst size the largest run (1 to 2) and then the branch (3 to 4). xample: X-SS Material: Basic Material Type (B=Brass, SS=316 Stainless Steel, S=Steel) Special ittings: If there is any question as to the fitting desired, particularly for special fitting configurations, it is suggested that a customer print be submitted with the fitting request for quote. Availability: Items priced in current price list 4260 are carried in stock. Price and delivery for non-standard items quoted on request through the quick response department. 4 Instrumentation Connectors ivision untsville, Alabama
5 T1 Male ex Long Nipple MLN R X T2 Instrument Pipe ittings NPT TRA orking s (PSIG) PARKR MAL R Stainless PART NO. T 1 T 2 X in. in. Brass Steel Steel 1-1 MLN-(*) 1/16 1/16 7/16 * MLN-(*) 1/8 1/8 7/16 * MLN /8 1/8 7/ MLN-2 1/8 1/8 7/ MLN /8 1/8 7/ MLN-(*) 1/4 1/4 5/8 * MLN-2 1/4 1/4 5/ MLN /4 1/4 5/ MLN-3 1/4 1/4 5/ MLN-4 1/4 1/4 5/ MLN-(*) 3/8 3/8 3/4 * MLN-(*) 1/2 1/2 7/8 * MLN-2 1/2 1/2 7/ MLN-3 1/2 1/2 7/ *Specify Length Male Close Nipple MCN R R orking s (PSIG) PARKR NPT TRA Stainless PART NO. MAL R Brass Steel Steel 1-1 MCN 1/ MCN 1/ MCN 1/ MCN 3/ MCN 1/ MCN 3/ MCN T1 T2 T1 Adapter RA X R T2 NPT TRA orking s (PSIG) PARKR MAL MAL Stainless PART NO. T 1 T 2 X R Brass Steel Steel 2-1 RA 1/8 1/16 5/ RA 1/8 1/8 5/ RA 1/4 1/16 3/ RA 1/4 1/8 3/ RA 1/4 1/4 3/ RA 3/8 1/16 7/ RA 3/8 1/8 7/ RA 3/8 1/4 7/ RA 3/8 3/8 7/ RA 1/2 1/8 1-1/ RA 1/2 1/4 1-1/ RA 1/2 3/8 1-1/ RA 1/2 1/2 1-1/ RA 3/4 1/8 1-3/ RA 3/4 1/4 1-3/ RA 3/4 3/8 1-3/ RA 3/4 1/2 1-3/ RA 1 1/8 1-5/ RA 1 1/4 1-5/ RA 1 3/8 1-5/ RA 1 1/2 1-5/ RA 1 3/4 1-5/ RA / RA 1-1/ imensions for reference only, subject to change. 5 Instrumentation Connectors ivision untsville, Alabama
6 Instrument Pipe ittings T1 Male ex Nipple MN R X T2 NPT TRA orking s (PSIG) PARKR MAL R Stainless PART NO. T 1 T 2 X in. in. Brass Steel Steel 1-1 MN 1/16 1/16 7/ MN 1/8 1/16 7/ MN 1/8 1/8 7/ MN 1/4 1/16 5/ / MN 1/4 1/8 5/ / MN 1/4 1/4 5/ MN 3/8 1/16 3/ / MN 3/8 1/8 3/ / MN 3/8 1/4 3/ MN 3/8 3/8 3/ MN 1/2 1/8 7/ / MN 1/2 1/4 7/ / MN 1/2 3/8 7/ / MN 1/2 1/2 7/ MN 3/4 1/8 1-1/ / MN 3/4 1/4 1-1/ / MN 3/4 3/8 1-1/ / MN 3/4 1/2 1-1/ MN 3/4 3/4 1-1/ MN 1 1/8 1-3/ / MN 1 1/4 1-3/ / MN 1 3/8 1-3/ / MN 1 1/2 1-3/ / MN 1 3/4 1-3/ / MN / MN 1-1/ / / MN 1-1/4 1-1/4 1-3/ MN 1-1/2 1-1/ T1 emale ex Coupling C X T2 NPT TRA orking s (PSIG) PARKR MAL Stainless PART NO. T 1 T 2 X Brass Steel Steel 1-1 C 1/16 1/16 1/ C 1/8 1/16 5/ C 1/8 1/8 5/ C 1/4 1/16 3/ C 1/4 1/8 3/ C 1/4 1/4 3/ C 3/8 1/16 7/ C 3/8 1/8 7/ C 3/8 1/4 7/ C 3/8 3/8 7/ C 1/2 1/8 1-1/ C 1/2 1/4 1-1/ C 1/2 3/8 1-1/ C 1/2 1/2 1-1/ C 3/4 1/8 1-3/ C 3/4 1/4 1-3/ C 3/4 3/8 1-3/ C 3/4 1/2 1-3/ C 3/4 3/4 1-3/ C 1 1/8 1-5/ C 1 1/4 1-5/ C 1 3/8 1-5/ C 1 1/2 1-5/ C 1 3/4 1-5/ C / C 1-1/ C 1-1/4 1-1/ C 1-1/2 1-1/2 2-3/ imensions for reference only, subject to change. 6 Instrumentation Connectors ivision untsville, Alabama
7 Instrument Pipe ittings T2 X Reducing Bushing RB R T1 NPT TRA orking s (PSIG) PARKR MAL MAL Stainless PART NO. T 1 T 2 X R Brass Steel Steel 2-1 RB 1/8 1/16 7/ RB 1/4 1/16 5/ RB 1/4 1/8 5/ RB 3/8 1/16 3/ RB 3/8 1/8 3/ RB 3/8 1/4 3/ RB 1/2 1/8 7/ RB 1/2 1/4 7/ RB 1/2 3/8 7/ RB 3/4 1/8 1-1/ RB 3/4 1/4 1-1/ RB 3/4 3/8 1-1/ RB 3/4 1/2 1-1/ RB 1 1/8 1-3/ RB 1 1/4 1-3/ RB 1 3/8 1-3/ RB 1 1/2 1-3/ RB 1 3/4 1-3/ RB 1-1/4 3/4 1-3/ RB 1-1/ / RB 1-1/ RB 1-1/2 1-1/ Male lbow M orking s (PSIG) PARKR NPT TRA Stainless PART NO. MAL X R Brass Steel Steel 1-1 M 1/16 3/ M 1/8 7/ M 1/4 9/ M 3/8 3/ M 1/2 7/ M 3/4 1-1/ M 1 1-5/ X R imensions for reference only, subject to change. 7 Instrumentation Connectors ivision untsville, Alabama
8 Instrument Pipe ittings X emale lbow NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X 1 Brass Steel Steel 1-1 1/16 7/ /8-1/16 9/ /8 9/ /4-1/8 3/ /4 3/ /8 7/ /2 1-1/ /4 1-5/ / /4 1-7/ /2 2-1/ emale lbow 45 V NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X 1 Brass Steel Steel 1-1 V 1/16 7/ V 1/8 9/ V 1/4 3/ V 3/8 7/ V 1/2 1-1/ V 3/4 1-5/ V 1 1-5/ X X Street lbow S 1 R NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL MAL X 1 R Brass Steel Steel 1-1 S 1/16 1/16 9/ S 1/8 1/16 9/ S 1/8 1/8 9/ S 1/4 1/16 9/ S 1/4 1/8 9/ S 1/4 1/4 3/ S 3/8 1/16 3/ S 3/8 1/8 3/ S 3/8 1/4 3/ S 3/8 3/8 7/ S 1/2 1/8 7/ S 1/2 1/4 7/ S 1/2 3/8 7/ S 1/2 1/2 1-1/ S 3/4 1/8 1-1/ S 3/4 1/4 1-1/ S 3/4 3/8 1-1/ S 3/4 1/2 1-1/ S 3/4 3/4 1-5/ S 1 1/8 1-5/ S 1 1/4 1-5/ S 1 3/8 1-5/ S 1 1/2 1-5/ S 1 3/4 1-5/ S / S 1-1/4 1-1/4 1-7/ imensions for reference only, subject to change. 8 Instrumentation Connectors ivision untsville, Alabama
9 Instrument Pipe ittings Street lbow 45 SV NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL MAL X 1 R Brass Steel Steel 1-1 SV 1/16 1/16 7/ SV 1/8 1/8 9/ SV 1/4 1/4 3/ SV 3/8 3/8 7/ SV 1/2 1/2 1-1/ SV 3/4 3/4 1-5/ SV / X 1 R emale Tee T NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X Brass Steel Steel T 1/16 7/ T 1/8 9/ T 1/4 3/ T 3/8 7/ T 1/2 1-1/ T 3/4 1-5/ T 1 1-5/ T 1-1/4 1-7/ T 1-1/2 2-1/ X Street Tee ST NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL MAL X 1 R Brass Steel Steel ST 1/16 1/16 7/ ST 1/8 1/8 9/ ST 1/4 1/4 3/ ST 3/8 3/8 7/ ST 1/2 1/2 1-1/ ST 3/4 3/4 1-5/ ST / R X imensions for reference only, subject to change. 9 Instrumentation Connectors ivision untsville, Alabama
10 Instrument Pipe ittings Male Branch Tee MBT NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL MAL X 1 R Brass Steel Steel MBT 1/16 1/16 7/ MBT 1/8 1/8 9/ MBT 1/4 1/4 3/ MBT 3/8 3/8 7/ MBT 1/2 1/2 1-1/ MBT 3/4 3/4 1-5/ MBT / R X Male Tee MT NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X 1 R Brass Steel Steel MT 1/16 5/ MT 1/8 7/ MT 1/4 9/ MT 3/8 3/ MT 1/2 7/ MT 3/4 1-1/ MT 1 1-5/ MT 1-1/4 1-5/ MT 1-1/2 1-7/ R X imensions for reference only, subject to change. 10 Instrumentation Connectors ivision untsville, Alabama
11 Instrument Pipe ittings emale Cross X NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X Brass Steel Steel 1 X 1/16 7/ X 1/8 9/ X 1/4 3/ X 3/8 7/ X 1/2 1-1/ X 3/4 1-5/ X 1 1-5/ X Pipe Cap CP NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X Brass Steel Steel 1 CP 1/16 7/ CP 1/8 9/ CP 1/4 3/ CP 3/8 7/ CP 1/2 1-1/ CP 3/4 1-1/ CP 1 1-5/ X ex ead Plug P NPT orking s (PSIG) PARKR TRA Stainless PART NO. MAL X R Brass Steel Steel 1 P 1/16 3/ P 1/8 7/ P 1/4 9/ P 3/8 11/ P 1/2 7/ P 3/4 1-1/ P 1 1-5/ X R imensions for reference only, subject to change. 11 Instrumentation Connectors ivision untsville, Alabama
12 Instrument Pipe ittings ollow ex Plug P NPT orking s (PSIG) PARKR TRA INTRNAL Stainless PART NO. MAL X Brass Steel Steel 1 P 1/16 5/ P 1/8 3/ P 1/4 1/ P 3/8 5/ INTRNAL OLLO X Straight Thread Adapters ex ead Plug P5ON R INTR- PARKR CANGS PORT T *2 PART NO. IT UN/UN-2A X R RILL *L2 O-RING 4 P5ON 4 PST 7/ / P5ON 6 PST 9/ / P5ON 8 PST 3/4-16 7/ P5ON 12 PST 1-1/ / P5ON 16 PST 1-5/ / *2 drill and L2 depth are optional manufacturing method per SA. X O RING ollow ex Plug P5ON INTR- PARKR CANGS PORT T INTRNAL X PART NO. IT UN/UN-2A X R IA. O-RING 4 P5ON 4 PST 7/ / P5ON 6 PST 9/ / P5ON 8 PST 3/4-16 5/ P5ON 12 PST 1-1/ / P5ON 16 PST 1-5/ / R INTRNAL OLLO X O RING imensions for reference only, subject to change. 12 Instrumentation Connectors ivision untsville, Alabama
13 Straight Thread Adapters Straight Thread Reducer/xpander 5OG5 INTR- T2 T1 PARKR CANGS PORT T PORT T 2 PART NO. IT UN/UN-2B UN/UN-2A X RILL R O-RING 6-4 5OG5 6-RBST-4 7/ / / OG5 8-RBST-4 7/ /4-16 7/ OG5 12-RBST-8 3/ / / OG5 16-RBST / / / *2 drill is optional manufacturing method per SA. R T 2 T 1 Male SA Straight Thread to emale NPT Thread GOA T1 T2 - NPT INTR- STRAIGT MAL ST O-RING PARKR CANGS TRA PIP MINIMUM UNIORM PART NO. IT SIZ SIZ R OPNING X SIZ # 4-4 GOA 4SA-7-4 7/ / / GOA 6SA-7-6 9/ / / GOA 8-SA-7-8 3/4-16 1/ / GOA 12-SA / / / GOA 16-SA / / Includes O -ring. R T 2 T 1 Male Connector to SA Straight Thread C A R PARKR PARKR INTR- STRAIGT O-RING CPI TM A-LOK CANGS TUB TRA AS PART NO. PART NO. IT O.. SIZ X A C R NO. 4-4 Z3BA 4-4 Z3LA 400-IL-4ST 1/4 7/ / Z3BA 5-5 Z3LA 500-IL-5ST 5/16 1/2-20 5/ Z3BA 6-6 Z3LA 600-IL-6ST 3/8 9/ / Z3BA 8-8 Z3LA 810-IL-8ST 1/2 3/4-16 7/ Z3BA Z3LA 1010-IL-10ST 5/8 7/ Z3BA Z3LA 1210-IL-12ST 3/4 1-1/ / Z3BA Z3LA 1410-IL-14ST 7/8 1-3/ / Z3BA Z3LA 1610-IL-16ST 1 1-5/ / Includes body, nut, ferrule and O -ring. Average value. O -Ring Seals All standard O -Rings are Buna-N material 70 urameter hardness. or other materials state material after part number. imensions for reference only, subject to change. 13 Instrumentation Connectors ivision untsville, Alabama
14 ISO Conversion ittings Visual Index ISO itting Nomenclature page 15 ISO Thread/ractional Tube Connectors Sealing ashers Typical astening Threads page 16 BSPP Thread orms page 17 BSP Taper Male Connector page 21 BSPT BSPP Male Branch Tee (Positionable) page 24 Bonded Seals (Stainless) page 26 ISO Conversion ittings NPT Male/ BSP Taper Male page 18 NPT Male/ BSPP Male page 18 BSPP Male Connector page 21 BSP Taper emale Connector page 21 BSPT BSP Taper Male Adapter page 24 BSPP Male Adapter page 25 BSPT Copper ashers/male page 26 Copper ashers/emale page 26 NPT emale/ BSP Taper Male page 18 BSPP emale Gauge Connector page 22 BSPPGC BSP Taper emale Adapter page 25 BSPT Thread and Tube nd Size Charts page 27, 28, 29 NPT emale/ BSPP Male page 19 BSP Taper Male lbow page 22 BSPP emale Adapter page 25 BSPP ngineering Report eat Code Traceability page 30 BSP Taper emale/ NPT Male page 19 BSPP emale/ NPT Male page 19 BSPP Male lbow (Positionable) page 23 BSPP emale Gauge Adapter page 26 BSP Taper Male ex Pipe Plug page 20 BSPP Parallel Male ex Pipe Plug page 20 BSPT BSPT BSPP Male Run Tee (Positionable) page 23 Visual Index for Instrument Pipe ittings on page Instrumentation Connectors ivision untsville, Alabama
15 Parker ISO itting Nomenclature ISO Conversion ittings Parker ISO Adapters utilize the same basic part numbering system that you are already familiar with from our CPI TM and A-LOK Catalogs. To specify a Parker Instrumentation Connector with an ISO thread form, simply suffix the size designator with the thread form designator as illustrated. Build a CPI TM or PIP part number by filling in the following boxes: (A) (B) (A) (B) (C) () Port #1 Size Thread Port #2 Size Thread Shape Material esignator esignator esignator esignator esignator esignator Build an A-LOK part number by filling in the following boxes: (A) (C) (A) (B) () Port #1 Size Shape Port #2 Size Thread Material esignator esignator esignator esignator esignator (A) Port Size esignators: Port sizes are incremented by 1/16" 1 = 1/16" 6 = 3/8" and only the numerator is required to 2 = 1/8" 8 = 1/2" specify a size in a part number. 3 = 3/16" 10 = 5/8" 4 = 1/4" 12 = 3/4" 5 = 5/16" 16 = 1" (larger sizes available) (B) Thread Type esignators: Leave Blank: ractional Tube Size N 1 = NPT per ANSI B K = ISO Taper per; ISO 7/1, BS21, JIS B0203, IN 2999 R = ISO Parallel per; ISO 228/1+2, IN 3852 orm A, BS2779 (BSPP), JIS B0202 BR = ISO Parallel per; ISO 228/1+2, IN 3852 orm B, BS2779 (BSPP), JIS B0202 GC = ISO Parallel, emale Gauge connector 1 N thread type designator is only required for A-LOK nomenclature (C) Body Shape esignator: BZ = CPI TM Male Connector MSC = A-LOK Male Connector RA = Pipe Reducing Adapter MN = Pipe Male ex Nipple See Catalog for further detail () Material esignators: SS = Stainless Steel for CPI TM and Pipe ittings 316 = Stainless Steel for A-LOK B = Brass Sealing BSP Taper threads require the use of a thread sealant. Material Stainless Steel Brass Standard ASTM A276 ASM SA 479 ASTM B16 ASTM B 453 BSPP threads require a sealing washer. This washer may either be a metal (copper is standard) gasket or a Bonded Seal (elastomer bonded to a metal retaining washer). The BSPP, form A requires the use of a bonded seal. (Page 26) The BSPP, form B (cutting face) may be used with or without a sealing washer. or applications where the cutting face may not seal or where galling is a potential problem, the use of a washer is suggested. xample: The Thread orm esignators have been highlighted in the following examples for easy recognition. 4-4K BZ-SS 1/4" CPI TM Tube itting by 1/4" BSPT Pipe Thread 6-4R RA-SS 3/8" emale NPT by 1/4" BSPP (form A) Reducing Adapter A Bonded Seal should be used with this fitting. (Page 26) 6MSC4BR-316 3/8" A-LOK Tube itting by 1/4" BSPP (form B) A Copper asher should be used with this fitting. (Page 26) 15 Instrumentation Connectors ivision untsville, Alabama
16 ISO Conversion ittings Typical astening Threads American Standard Pipe Thread (NPT) BSP threads BSPP Parallel and BSP Taper threads have a thread flank angle of 55 inclusive. BSPP British Standard Pipe Parallel threads for tubes and fittings where pressure-tight joints are not made on the thread, i.e., a peripheral seal is used. BSP Taper British Standard Pipe Taper threads for tubes and fittings where pressure-tight joints are made on the threads. 60 inclusive thread flank angle Pitch measured in inches Truncation of root and crest are flat Taper angle 1 47' (ISO 7/1) BSPT Comparison of Thread orms NPT BSPP BSPT Thread Threads Threads Size per Inch Thread Size per Inch 1/8 27 1/8 1/8 28 1/4 18 1/4 1/4 19 3/8 18 3/8 3/8 19 1/2 14 1/2 1/2 14 3/4 14 3/4 3/ / /4 11 1/2 1 1/4 1 1/ /2 11 1/2 1 1/2 1 1/ inclusive thread flank angle Pitch measured in inches Truncation of root and crest are round Taper angle 1 47' (ISO 228/1) BSPP Generic Thread PITC 55 inclusive thread flank angle Pitch measured in inches Truncation of root and crest are round iameter measured in inches MAJOR IA. LANK ANGL MINOR IA. PITC IA. 16 Instrumentation Connectors ivision untsville, Alabama
17 BSPP Thread orms orm A ISO Conversion ittings A self centering taper is used at the hex which centers a Bonded washer (usually metal and elastomer) to seal to the surface surrounding the female thread. Bonded Seal orm B A metal gasket (usually copper) performs the seal between the face of the body and the face of the female threaded component. or orm B replace R in P/N with BR. Copper asher Gauge Port BSPP (emale) Copper asher asher 17 Instrumentation Connectors ivision untsville, Alabama
18 ISO Conversion ittings Male ex Nipple NPT to BSP Taper R R orking NPT BSPT PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R PSI BAR PSI BAR 2-2K MN 1/8-27 1/8-28 7/ K MN 1/4-18 1/4-19 5/ K MN 3/8-18 3/8-19 3/ K MN 1/2-14 1/2-14 7/ K MN 3/4-14 3/ / K MN / / Used to connect a female NPT and a female BSPT threaded component. T 1 T 2 Male ex Nipple NPT to BSPP R 1 R 2 T 1 T 2 orking NPT BSPP PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R 1 R 2 PSI BAR PSI BAR 2-2R MN 1/8-27 1/8-28 9/ R MN 1/4-18 1/4-19 3/ R MN 3/8-18 3/8-19 7/ R MN 1/2-14 1/ / R MN 3/4-14 3/ / R MN / / Used to connect a female NPT and a female BSPP threaded component. NOT: Bonded seal, page 26, must be used on BSPP end shown. Please note the pressure ratings are based on taper threaded ends. The pressure rating for the BSPP ends are dependent on the type of sealing washer used. emale NPT to Male BSP Taper Adapter R orking NPT BSPT PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R PSI BAR PSI BAR 2-2K RA 1/8-27 1/8-28 9/ K RA 1/4-18 1/4-19 3/ K RA 3/8-18 3/8-19 7/ K RA 1/2-14 1/ / K RA 3/4-14 3/ / K RA / / Used to connect a male NPT and a female BSPT threaded component. T 1 T 2 imensions for reference only, subject to change. 18 Instrumentation Connectors ivision untsville, Alabama
19 ISO Conversion Pipe ittings emale NPT to Male BSPP Adapter R orking NPT BSPP PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R PSI BAR PSI BAR 2-2R RA 1/8-27 1/8-28 9/ R RA 1/4-18 1/4-19 3/ R RA 3/8-18 3/8-19 7/ R RA 1/2-14 1/ / R RA 3/4-14 3/ / R RA / / Used to connect a male NPT and a female BSPP threaded component. NOT: Bonded Seal, page 26, must be used with BSPP end shown. T 1 T 2 emale BSP Taper to Male NPT Adapter R orking BSPT NPT PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R PSI BAR PSI BAR 2K-2 RA 1/8-28 1/8-27 9/ K-4 RA 1/4-19 1/4-18 3/ K-6 RA 3/8-19 3/8-18 7/ K-8 RA 1/2-14 1/ / K-12 RA 3/4-14 3/ / K-16 RA /2 1 5/ Used to connect a male BSPT and a female NPT threaded component. T 1 T 2 emale BSPP to Male NPT Adapter R orking BSPP NPT PARKR TRA TRA Brass Stainless Steel PART NO. T 1 T 2 X R PSI BAR PSI BAR 2R-2 RA 1/8-28 1/8-27 3/ R-4 RA 1/4-19 1/4-18 7/ R-6 RA 3/8-19 3/ / R-8 RA 1/2-14 1/ / R-12 RA 3/4-14 3/ / R-16 RA /2 1 5/ Used to connect a male BSPP and a female NPT threaded component. T 1 T 2 imensions for reference only, subject to change. 19 Instrumentation Connectors ivision untsville, Alabama
20 ISO Conversion Pipe ittings BSP Taper Male ex Pipe Plug BSPT BSPT R T 1 BSPP Parallel Male ex Pipe Plug R orking BSPT PARKR TRA Brass Stainless Steel PART NO. T 1 X R PSI BAR PSI BAR 2K P 1/8-28 7/ K P 1/4-19 5/ K P 3/8-19 3/ K P 1/2-14 7/ K P 3/ / K P / orking BSPT PARKR TRA Brass Stainless Steel PART NO. T 1 X R PSI BAR PSI BAR 2R P 1/8-28 9/ R P 1/4-19 3/ R P 3/8-19 7/ R P 1/ / R P 3/ / R P / Note: Bonded seal page 26 must be used on BSPP end shown. Please note the pressure ratings are based on taper threaded ends. The pressure rating for the BSPP ends are dependent on the type of sealing washer used. BSPP T 1 imensions for reference only, subject to change. 20 Instrumentation Connectors ivision untsville, Alabama
21 ISO Threaded to ractional Tube Connectors BSP Taper Male Connector C A BSPT BSPT R TUB BSP PARKR CPI TM PARKR A-LOK O.. TR. PART PART A C R INC TRA NUMBR NUMBR INC INC INC INC X 1/8 1/ K BZ 2MSC2K /16 1/8 1/ K BZ 2MSC4K /16 1/4 1/ K BZ 4MSC2K /2 1/4 1/ K BZ 4MSC4K /16 1/4 3/ K BZ 4MSC6K /16 1/4 1/ K BZ 4MSC8K /8 5/16 1/ K BZ 5MSC2K /16 5/16 1/ K BZ 5MSC4K /16 3/8 1/ K BZ 6MSC2K /8 3/8 1/ K BZ 6MSC4K /8 3/8 3/ K BZ 6MSC6K /16 3/8 1/ K BZ 6MSC8K /8 1/2 1/ K BZ 8MSC4K /16 1/2 3/ K BZ 8MSC6K /16 1/2 1/ K BZ 8MSC8K /8 Connects fractional tube to female ISO taper thread. BSPP Male Connector C A R R TUB PARKR CPI TM PARKR A-LOK O.. BSP PART PART A C R INC TRA NUMBR NUMBR INC INC INC INC X 1/8 1/ R BZ 2MSC2R /16 1/8 1/ R BZ 2MSC4R /4 1/8 3/ R BZ 2MSC6R /8 1/4 1/ R BZ 4MSC2R /16 1/4 1/ R BZ 4MSC4R /4 1/4 3/ R BZ 4MSC6R /8 1/4 1/ R BZ 4MSC8R /16 3/8 1/ R BZ 6MSC2R /8 3/8 1/ R BZ 6MSC4R /4 3/8 3/ R BZ 6MSC6R /8 3/8 1/ R BZ 6MSC8R /16 1/2 1/ R BZ 8MSC4R /16 1/2 3/ R BZ 8MSC6R /8 1/2 1/ R BZ 8MSC8R /16 3/4 1/ R BZ 12MSC8R /16 3/4 3/ R BZ 12MSC12R /8 1 1/ R BZ 16MSC8R / R BZ 16MSC16R /8 Connects fractional tube to female ISO parallel thread. NOT: Bonded Seal, page 26, must be used with BSPP end shown. BSP Taper emale Connector C A BSPT BSPT TUB PARKR CPI TM PARKR A-LOK O.. BSPT PART PART A C INC TRA NUMBR NUMBR INC INC INC X 1/4 1/ K GBZ 4SC2K /16 1/4 1/ K GBZ 4SC4K /4 1/4 3/ K GBZ 4SC6K /8 1/4 1/ K GBZ 4SC8K /16 3/8 1/ K GBZ 6SC4K /4 3/8 3/ K GBZ 6SC6K /8 3/8 1/ K GBZ 6SC8K /16 1/2 1/ K GBZ 8SC4K /16 1/2 3/ K GBZ 8SC6K /8 1/2 1/ K GBZ 8SC8K /16 Connects fractional tube to male ISO taper thread. imensions for reference only, subject to change. 21 Instrumentation Connectors ivision untsville, Alabama
22 ISO Threaded to ractional Tube Connectors BSPP emale Gauge Connector C A BSPPGC BSPPGC TUB PARKR CPI TM PARKR A-LOK O.. BSPP PART PART A C INC TRA NUMBR NUMBR INC INC INC X 1/4 1/ GC GBZ 4SC4GC /4 1/4 3/ GC GBZ 4SC6GC /16 1/4 1/ GC GBZ 4SC8GC /16 5/16 1/ GC GBZ 5SC4GC /4 5/16 1/ GC GBZ 5SC8GC /16 3/8 1/ GC GBZ 6SC4GC /4 3/8 3/ GC GBZ 6SC6GC /16 3/8 1/ GC GBZ 6SC8GC /16 1/2 3/ GC GBZ 8SC6GC /16 1/2 1/ GC GBZ 8SC8GC /16 Connects fractional tube to male ISO parallel (gauge). NOT: Copper asher, page 26, for female thread sealing, must be used on BSPP female end shown. BSP Taper Male lbow C L X TUB PARKR CPI TM PARKR A-LOK O.. BSPT PART PART C L R INC TRA NUMBR NUMBR INC INC INC INC X 1/4 1/ K CBZ 4MSL2K /2 1/4 1/ K CBZ 4MSL4K /16 1/4 3/ K CBZ 4MSL6K /4 1/4 1/ K CBZ 4MSL8K /8 5/16 1/ K CBZ 5MSL4K /8 3/8 1/ K CBZ 6MSL2K /8 3/8 1/ K CBZ 6MSL4K /8 3/8 3/ K CBZ 6MSL6K /4 1/2 3/ K CBZ 8MSL6K /16 1/2 1/ K CBZ 8MSL8K /8 Connects fractional tube to female ISO taper thread. R imensions for reference only, subject to change. 22 Instrumentation Connectors ivision untsville, Alabama
23 ISO Threaded to ractional Tube Connectors BSPP Male lbow (Positionable) C L X TUB PARKR CPI TM PARKR A-LOK O.. BSPP PART PART C L R INC TRA NUMBR NUMBR INC INC INC INC X 1/4 1/ R CBZ 4MSL2R /16 1/4 1/ R CBZ 4MSL4R /16 3/8 1/ R CBZ 6MSL4R /16 3/8 3/ R CBZ 6MSL6R /4 1/2 1/ R CBZ 8MSL4R /8 1/2 3/ R CBZ 8MSL6R /8 1/2 1/ R CBZ 8MSL8R /8 5/8 1/ R CBZ 10MSL8R /16 3/4 1/ R CBZ 12MSL8R /16 3/4 3/ R CBZ 12MSL12R /16 1 3/ R CBZ 16MSL12R / R CBZ 16MSL16R /16 Connects fractional tube to female ISO parallel thread. L4N O RING STRAIGT TRA R BSPP Male Run Tee (Positionable) C L R TUB PARKR CPI TM PARKR A-LOK O.. BSPP PART PART C L R INC TRA NUMBR NUMBR INC INC INC INC X 1/4 1/ R-4 RBZ 4MRT2R /16 1/4 1/ R-4 RBZ 4MRT4R /16 3/8 1/ R-6 RBZ 6MRT6R /16 1/2 3/ R-8 RBZ 8MRT8R /8 1/2 1/ R-8 RBZ 8MRT8R /8 5/8 1/ R-10 RBZ 10MRT8R /16 3/4 1/ R-12 RBZ 12MRT8R /16 3/4 3/ R-12 RBZ 12MRT12R / R-16 RBZ 16MRT16R /16 Connects fractional tube to female ISO parallel thread. L4N O RING imensions for reference only, subject to change. 23 Instrumentation Connectors ivision untsville, Alabama
24 ISO Threaded to ractional Tube Connectors BSPP Male Branch Tee (Positionable) TUB PARKR CPI TM PARKR A-LOK O.. BSPP PART PART C L R INC TRA NUMBR NUMBR INC INC INC INC X 1/4 1/ R SBZ 4MBT2R /16 1/4 1/ R SBZ 4MBT4R /16 3/8 1/ R SBZ 6MBT4R /16 1/2 3/ R SBZ 8MBT6R /8 1/2 1/ R SBZ 8MBT8R /8 5/8 1/ R SBZ 10MBT8R /16 3/4 1/ R SBZ 12MBT8R /16 3/4 3/ R SBZ 12MBT12R / R SBZ 16MBT16R /16 Connects fractional tube to female ISO parallel thread. C L X L4N O RING R BSP Taper Male Adapter K A BSPT BSPT R TUB PARKR CPI TM PARKR A-LOK CPI TM A-LOK MIN. O.. BSPT PART PART A K A K R BOR INC TRA NUMBR NUMBR INC INC INC INC INC X INC 1/8 1/ K T2 2MA2K / /8 1/ K T2 2MA4K / /4 1/ K T2 4MA2K / /4 1/ K T2 4MA4K / /16 1/ K T2 5MA2K / /16 1/ K T2 5MA4K / /8 1/ K T2 6MA4K / /8 3/ K T2 6MA6K / /8 1/ K T2 6MA8K / /2 1/ K T2 8MA4K / /2 3/ K T2 8MA6K / /2 1/ K T2 8MA8K / /8 3/ K T2 10MA6K / /8 1/ K T2 10MA8K / /4 3/ K T2 12MA12K / K T2 16MA16K /8.813 Connects fractional tube to female ISO taper thread. Generic, annealed tube stub for effective ferrule sealing. imensions for reference only, subject to change. 24 Instrumentation Connectors ivision untsville, Alabama
25 ISO Threaded to ractional Tube Connectors BSPP Male Adapter K A R TUB PARKR CPI TM PARKR A-LOK CPI TM A-LOK MIN. O.. BSPP PART PART A K A K R BOR INC TRA NUMBR NUMBR INC INC INC INC INC X INC 1/8 1/ R T2 2MA2R / /8 1/ R T2 2MA4R / /4 1/ R T2 4MA2R / /4 1/ R T2 4MA4R / /8 1/ R T2 6MA4R / /8 3/ R T2 6MA6R / /2 1/ R T2 8MA4R / /2 3/ R T2 8MA6R / /2 1/ R T2 8MA8R / /4 3/ R T2 12MA12R / R T2 16MA16R /4.813 Connects fractional tube end to female ISO parallel thread. NOT: Bonded Seal, page 21 must be used on BSPP end shown. Generic, annealed tube stub for effective sealing. BSP Taper emale Adapter K A BSPT TUB PARKR CPI TM PARKR A-LOK CPI TM A-LOK MIN. O.. BSPT PART PART A K A K BOR INC TRA NUMBR NUMBR INC INC INC INC X INC 1/4 1/ K T2G 4A2K / /4 1/ K T2G 4A4K / /8 1/ K T2G 6A4K / /8 3/ K T2G 6A6K / /2 1/ K T2G 8A4K / /2 3/ K T2G 8A6K / /2 1/ K T2G 8A8K / Connects fractional tube end to male ISO taper thread. NOT: Tube stub is pre-grooved as standard. Generic (non-grooved) can be ordered through Quick Response. BSPT BSPP emale Adapter K A BSPP TUB PARKR CPI TM PARKR A-LOK CPI TM A-LOK MIN. O.. BSPP PART PART A K A K BOR INC TRA NUMBR NUMBR INC INC INC INC X INC 1/8 1/ R T2G 2A2R / /4 1/ R T2G 4A2R / /4 1/ R T2G 4A4R / /8 1/ R T2G 6A4R / /8 3/ R T2G 6A6R / /2 3/ R T2G 8A6R / /2 1/ R T2G 8A8R / Connects fractional tube end to male ISO parallel thread. NOT: Tube stub is pre-grooved as standard. Generic (non-grooved) can be ordered through Quick Response. BSPP imensions for reference only, subject to change. 25 Instrumentation Connectors ivision untsville, Alabama
26 ISO Threaded to ractional Tube Connectors BSPP emale Gauge Adapter K A TUB PARKR CPI TM PARKR A-LOK CPI TM A-LOK MIN. O.. BSPP PART PART A K A K BOR INC TRA NUMBR NUMBR INC INC INC INC X INC 1/4 1/ GC T2G 4A4GC / /8 3/ GC T2G 6A6GC / /2 1/ GC T2G 8A8GC / Connects fractional tube end to male ISO parallel thread (gauge). NOT: Copper asher, page 26, for female thread sealing, must be used on BSPP female end shown. NOT: Tube stub is pre-grooved as standard. Generic (non-grooved) can be ordered through Quick Response. Sealing ashers Bonded Seals Consists of an outer stainless steel ring with a bonded Viton inner ring used to seal a male ISO parallel thread. T PART BSPP NO. TRA M30201-SS 1/ M30202-SS 1/ M30203-SS 3/ M30204-SS 1/ M30206-SS 3/ M30208-SS These seals are also available in steel with a Nitrile inner ring. Simply replace Suffix SS with S PRSSUR RATINGS OR SALING ASRS TRA SIZ PSI BAR 1/ / / / / T Copper ashers d or BSPP male thread sealing or BSPP female thread sealing PART NO. TRA d PART NO. TRA d M / M / M / M / M / M / M / M / M / M / M M Used to provide a seal with male or female parallel ISO threads. Please note the pressure ratings are based on taper threaded ends. The pressure rating for the BSPP ends are dependent on the type of sealing washer used. imensions for reference only, subject to change. 26 Instrumentation Connectors ivision untsville, Alabama
27 Thread and Tube nd Size Chart (U.S.A.) NPT Thread Straight Thread Tubing O.. Size 1/16" 1/8" (1/8-27) 5/ / /16" 1/8" 1/4" (1/4-18) 1/2-20 3/16" 3/8" (3/8-18) 9/ /4" 5/16" 1/2" (1/2-14) 3/4-16 3/8" 1/2" 3/4" (3/4-14) 7/8-14 5/8" 1" (1"-11 1/2) 1-1/ /4" American Standard Pipe Thread (NPT) American Standard Unified Thread (Straight) 7/8" 60 thread angle Pitch measured in inches Truncation of root and crest are flat Taper angle 1 47' 60 thread angle Pitch measured in inches Truncation of root and crest are flat iameter measured in inches 1" 27 Instrumentation Connectors ivision untsville, Alabama
28 Pipe and Tube nd Size Chart (U.S.A.) NPT Thread Tubing O.. Size 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2" 28 Instrumentation Connectors ivision untsville, Alabama
29 Thread and Tube nd Size Chart (International) BSPT Tapered Thread 1/8" (1/8-28) 1/4" (1/4-19) BSPP Parallel Thread 1/8" (1/8-28) 1/4" (1/4-19) Tubing O.. Size 2mm 3mm 4mm 6mm 8mm 3/8" (3/8-19) 3/8" (3/8-19) 10mm 12mm 1/2" (1/2-14) 1/2" (1/2-14) 14mm 15mm 3/4" (3/4-14) 3/4" (3/4-14) 16mm 18mm 1" (1"-11) 1" (1"-11) 20mm International Organization for Standards (ISO 7/1) (ISO 228/1) 22mm 25mm 55 thread angle Pitch measured in inches Truncation of root and crest are round Taper angle 1 47' 55 thread angle Pitch measured in inches Truncation of root and crest are round iameter measured in inches 29 Instrumentation Connectors ivision untsville, Alabama
30 ngineering Report eat Code Traceability Parker annifin s Instrumentation Connectors ivision offers eat Code Traceability (CT) on CPI TM, A-LOK, Instrumentation Pipe, and eld-lok fittings. CT refers to the fact that a specific part can be traced back to the original mill heat of metal from which it was made. Beginning with the original melt, a package of documents is created which completely describes the metal in physical and chemical terms. The end result is that a number, which is permanently stamped to the part, refers back to the document package. The CT number is stamped on the material (bar stock or forging) prior to manufacturing. The concept is useful because it provides a method for complete material accountability for the manufacturer and end customer. CT offers these advantages: Raw materials for manufacture must meet code requirements. This can be verified through documentation so that the customer is certain that what is ordered is received. CT provides a record of chemical analysis with the raw material. Thus, in areas requiring welding, the correct welding technique is applied. CT relieves the user of Parker instrumentation tube fittings of any doubts. It acts as an assurance for today and for tomorrow. The material used in Parker annifin instrumentation fitting components is 316 or 316L (welded products) stainless steel as specified and referenced in Section III of the ASM Boiler and Vessel code. The American Society of Mechanical ngineers (ASM) Boiler and Vessel Code, Section III, latest issue, entitled Rules for Construction of Nuclear Power Plant Components, is the principal document covering this type of fitting in the nuclear field. ANSI Standard B , Power Piping, and ANSI Standard B.31.7, Nuclear Power Piping, are also important documents in the field. In addition to the documentation of chemical and physical properties, great care is taken throughout the manufacture of Parker s tube fittings to ensure that potential stress corrosion will not be a problem in normal usage of the parts. Manufacturing processes avoid exposure of the parts to mercury or halogens, and control of thermal treatment avoids the condition known as continuous grain boundary carbide precipitation. or additional information please contact your local authorized Parker Instrumentation distributor or call Parker Instrumentation Connectors ivision and ask for Bulletin 4230-B Instrumentation Connectors ivision untsville, Alabama
31 VacuSeal ittings Catalog 4245-VacuSeal May 2006
32 VacuSeal ittings Catalog 4245-VacuSeal Introduction Parker UP products are designed as leak-free components for critical applications where ultra-high pure conditions are required. VacuSeal products, with their mating gasket and toroid design, provide a metal-to-metal seal with leak-free service from vacuum to positive pressure. eatured Products (see page 14) TorqTite gasket to seal damaged toroids and virtually eliminate loosening of componentry due to thermocycling and vibration. igh-purity Nickel and astelloy C-22 glands for extremely corrosive applications. Non-Rotational emale Nut to prevent transmission of torque during make-up and therefore minimize twist of componentry which causes stress concentration. Anti-Galling emale Nut to ensure consistent make-up without plating or lubrication. Materials Typical Raw Material Specifications ITTING MATRIAL BAR STOCK ORGINGS RCOMMN TUBING SPCIICATIONS Stainless Steel 316 ASTM A276, ASM SA479 ASM SA182 ASM SA213, ASTM A213, ASTM A249 Stainless Steel 316L ASTM A276, ASM SA479 Stainless Steel 316L VAR (Vacuum Arc Remelt) Stainless Steel 316L VIM/ VAR (Vacuum Induction Melt/Vacuum Arc Remelt) ASTM A276, ASM SA479 ASTM A276, ASM SA479 ASM SA182 ASM SA213, ASTM A213, ASTM A249 ASM SA182 ASTM A269, MIL T8504, MIL T8506 ASM SA182 ASTM A269, MIL T8504, MIL T8506 Material is marked with heat code to ensure raw material traceability. Gaskets Typical Raw Material Specifications MATRIAL SPCIICATIONS Nickel ASTM B162 (unplated) Stainless Steel ASTM A167 (Silver plated) astelloy C-22 is a registered trademark of aynes International, Inc. Specifications Ratings are based upon tests conducted on VacuSeal assemblies. All ratings comply with calculations per ANSI Code for Piping B31.3. orking s are rated at ambient temperature and are based on a 4 to 1 design factor. To determine pressure ratings in accordance with ANSI B31.1, multiply orking by Temperature Ratings ittings: Stainless Steel 316, 316L, 316L VAR, 316L VIM/VAR 1000 (537 C) Gaskets: igh-purity Nickel 600 (315 C) Silver plated Stainless Steel 1000 (537 C) imensions are for reference only and are subject to change. Tube ends conform to the dimensional requirements of ASTM A269. Plating: VacuSeal emale Nuts are Silver plated with an enhanced plating process. Avoid aggressive chemical processes used for cleaning, electropolishing and passivation that will remove plating. Removal or damage to plating will cause threads to gall, damaging fitting components and preventing a proper seal. Testing: VacuSeal products are rated to a elium leak rate of 1 X 10-9 ST cc/sec. Internal Surface inishes: VacuSeal components are available with controlled surface finishes and electropolished internal surfaces. Cleaning and Packaging: Ultra-igh Purity OMGA cleaning and packaging in a Class 100 Clean Room environment validated per ederal Standard 209, is standard for all electropolished VacuSeal components. or Make-Up Instructions see page 15. or Instructions see page 17. Copyright 2000, All Rights Reserved. Offer of Sale The items described in this document are hereby offered for sale by Parker annifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale located on page 18. ARNING AILUR, IMPROPR SLCTION OR IMPROPR US O T PROUCTS AN/OR SYSTMS SCRIB RIN OR RLAT ITMS CAN CAUS AT, PRSONAL INJURY AN PROPRTY AMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2 Instrumentation Products ivision untsville, AL USA
33 Catalog 4245-VacuSeal VacuSeal ittings Patented TorqTite gasket initially contacts on the inner taper, radially forcing out any entrapped contaminants. See page 14 for additional information. Two leak test ports for easy leak testing eat code on gland provides raw material traceability ull retraction of nut allows for minimum removal clearance Smooth transition into the Internal iameter minimizes entrapment areas Internal surface finish designator specified on electropolished glands nhanced Silver plating process for ease of assembly Index Glands Pages 4, 5, 6 Nuts, Caps, and Plugs Page 13 Bodies Pages 6, 7, 8, 9 i-lo Products Pages 14,15 elded Assemblies Page 10 eatured Products Page 15 elded Modules Page 11 Gaskets Page 12 Make-Up Instructions Page 16 Instructions Page 17 Offer of Sale Page 18 3 Instrumentation Products ivision untsville, AL USA
34 VacuSeal ittings Catalog 4245-VacuSeal Glands Short Tube Butt eld T Tube C Normal all orking O.. Number in. mm in. mm in. mm Thickness psi bar fractional 1/8 2-2 V1T3-* /4 ^4-4 V1M-* /4 4-4 V1T-* /4 4-4 V1T3-* /4 8-4 V1T3-* /8 8-6 V1M-* /8 8-6 V1T3-* /2 ^^8-8 V1M-* /2 8-8 V1T-* /2 8-8 V1T3-* metric 6 mm 4-6M V1T3-* mm mm 4-8M V1T3-* mm mm 8-10M V1T3-* mm mm 8-12M V1T3-* mm mm 12-18M V1T3-* mm ^Old Part Number 4-4 V1M-*.035 ^^Old Part Number 8-8 V1M-*.049 Long Tube eld T Tube C Normal all orking O.. Number in. mm in. mm in. mm Thickness psi bar fractional 1/8 2-2 V1T3-* /4 4-4 V1M-* /4 4-4 V1T3-* /4 4-4 V1T-* /4 4-4 V1T3-* /4 8-4 V1T3-* /8 8-6 V1M-* /8 8-6 V1T3-* /2 8-8 V1M-* /2 8-8 V1T-* /2 8-8 V1T3-* / V1T3-* V1T3-* metric 6 mm 4-6M V1T3-* mm mm 4-8M V1T3-* mm mm 8-10M V1T3-* mm mm 8-12M V1T3-* mm mm 12-18M V1T3-* mm Short Automatic Tube Butt eld T Tube C Tx Normal all orking Size Number in. mm in. mm in. mm in. mm in. mm Thickness psi bar fractional 1/4 4-4 V1Y3-* /2 8-8 V1Y3-* /8 8-6 V1Y3-* metric 6 mm 4-6M V1Y3-* mm mm 4-8M V1Y3-* mm mm 8-10M V1Y3-* mm mm 8-12M V1Y3-* mm Instrumentation Products ivision untsville, AL USA
35 Catalog 4245-VacuSeal VacuSeal ittings Glands (Continued) Long Automatic Tube Butt eld T Tube C Tx Normal all orking Size Number in. mm in. mm in. mm in. mm in. mm Thickness psig bar fractional 1/4 4-4 V1Y3-* /4 8-4 V1Y3-* /8 8-6 V1Y3-* /2 8-8 V1Y3-* / V1Y3-* V1Y3-* metric 6 mm 4-6M V1Y3-* mm mm 8-12M V1Y3-* mm mm 12-18M V1Y3-* mm Tx T Short Socket eld T Tube Tx orking Socket Number in. mm in. mm in. mm in. mm psig bar fractional 1/4 4-4 V1-* /4 4-4 V1-* Socket eld Tx T T Tube Socket fractional Number Tx orking in. mm in. mm in. mm in. mm psig bar 1/ V1-* /8 2-2 V1-* /4 4-4 V1-* /8 8-6 V1-* /2 8-8 V1-* / V1-* V1-* Reducing Socket eld Tx T T Tube Socket fractional Number Tx orking in. mm in. mm in. mm in. mm psig bar 1/8 4-2 V1-* /4 8-4 V1-* Blind (undrilled) Gland T T T Tube O.. Number in. mm fractional 1/8 2-2 V1-*-BL /4 4-4 V1-*-BL /2 8-8 V1-*-BL / V1-* -BL V1-*-BL Uses 2 BV-SS and 2 BVI-SS nuts 2 May contain internal transitions 3 O-rings fluorocarbon is standard. Contact local Parker representative for other available materials 5 Instrumentation Products ivision untsville, AL USA
36 VacuSeal ittings Catalog 4245-VacuSeal Glands (Continued) T C Male eld T Tube O.. fractional Number C orking in. mm in. mm in. mm psig bar 1/8 2-2 V1T3-* /8 4-2 V1T3-* /4 4-4 V1T3-* /4 8-4 V1T3-* /8 8-6 V1T3-* /2 8-8 V1T3-* / V1T3-* V1T3-* Tube Adapter (A-LOK ) T Tube O.. fractional Number C orking in. mm in. mm in. mm psig bar 1/4 4-4 V1TU-* /8 8-6 V1TU-* /2 8-8 V1TU-* Replace U with a 2 to designate groove for CPI itting. Bodies Male NPT Connector C C P P P Male NPT Size fractional Number C ex orking in. mm in. mm lat in. mm psig bar 1/ V-SS / /8 2-2 V-SS / /8 4-2 V-SS / /4 4-4 V-SS / /8 8-6 V-SS / /2 8-8 V-SS / / V-SS / V-SS / P P 1 Male Bulkhead Connector P Male NPT Size C 1 Max. 1 Panel Panel orking ex ex L ole Thickness in. mm in. mm in. mm in. mm lat lat in. mm in. mm Size psig bar Number fractional 1/4 4-4 V2B-SS /16 13/ / /4 8-4 V2B-SS /16 13/ / C C L L S 1 1 C Straight Thread O-Ring Seal Male Connector S Straight Thread C 1 ex Uniform O-Ring orking Size Number in. mm in. mm in. mm in. mm lat in. mm Size psig bar fractional 9/ VOA-SS / luorocarbon / VOA-SS luorocarbon / VOA-SS / luorocarbon Instrumentation Products ivision untsville, AL USA
37 Catalog 4245-VacuSeal VacuSeal ittings Bodies (Continued) 1 1 C C C G G G T T T emale NPT Connector P emale NPT ex orking Size Number in. mm lat in. mm psig bar fractional 1/ GV-SS / /8 2-2 GV-SS / /8 4-2 GV-SS / /4 4-4 GV-SS / /8 8-6 GV-SS / /2 8-8 GV-SS / / GV-SS / GV-SS / Compression Tube itting Connector (A-LOK ) T Tube O.. Number fractional ouble Male Union ex orking Size Number in. mm lat in. mm psig bar 1/8 2-2 V-SS / /4 4-4 V-SS / /2 8-8 V-SS / / V-SS / V-SS / ouble Male Reducing Union C ex G ex orking in. mm in. mm in. mm lat lat in. mm psig bar 1/8 2-2 VLZ-SS /8 7/ /4 4-4 VLZ-SS /8 9/ /8 8-6 VLZ-SS /16 11/ /2 8-8 VLZ-SS /16 7/ imensions - C,, are typical finger-tight. Change L to a B to select CPI one ferrule connector. Compression Tube itting Bulkhead Connector (A-LOK ) T Tube O.. or maximum pressure ratings reference the Instrument Tubing Selection Guide, found in the Technical Section of your Parker Instrumentation Master Binder. Max. 1 G Panel Panel orking C ex ex ex ole Thickness psig in. mm in. mm in. mm lat lat lat in. mm Size bar Number fractional 1/4 4-4 V2LZ-SS /8 5/8 9/ / /4 4-4 V2LZ-SS /8 5/8 9/ / /8 8-6 V2LZ-SS /16 3/4 11/ / /2 8-8 V2LZ-SS /16 15/16 7/ / imensions - C,, are typical finger-tight. Change L to a B to select CPI one ferrule connector. or maximum pressure ratings reference the Instrument Tubing Selection Guide, found in the Technical Section of your Parker Instrumentation Master Binder. 1 ex orking Size Number in. mm in. mm lat in. mm psig bar 1/4x1/8 4-2 V-SS / /2x1/4 8-4 V-SS / Bulkhead Union 1 1 C C C ex 1 ex Panel ole Max. Panel Thickness orking Size Number in. mm in. mm lat lat in. mm Size psig bar 1/4 4-4 BV-SS /4 3/ / /4 4-4 BV-SS /4 3/ / /2 8-8 BV-SS /16 1 1/ / /2 8-8 BV-SS /16 1 1/ / Instrumentation Products ivision untsville, AL USA
38 VacuSeal ittings Catalog 4245-VacuSeal Bodies (Continued) T 1 1 Tube Butt eld Bulkhead Connector T Tube O.. Size 1 Max. Panel Panel orking B C 1 ex ex ole Thickness in. mm in. mm in. mm in. mm lat lat in. mm Size psig bar Number fractional 1/4 4-4 T32BV-* /4 3/ / /4 4-4 T32BV-* /4 3/ / B C Coupling ex Size Number lat in. mm 1/8 2 VC-SS 7/ /4 4 VC-SS 3/ /2 8 VC-SS 1 1/ /4 12 VC-SS 1 1/ VC-SS 1 3/ Leak Test Ports ouble emale Reducing Union 1 ex Y orking Size Number in. mm in. mm lat in. mm in. mm psig bar 1/4x1/8 4-2 V7-SS / /2x1/4 8-4 V7-SS / Leak Test Ports 1 1 Y Leak Test Port Leak Test Port Y Reducing Adapter 1 ex Y orking Size Number in. mm in. mm lat in. mm in. mm psig bar 1/8x1/4 4-2 V7V-SS / /4x1/2 8-4 V7V-SS / Leak Test Port Leak Test Port 1 Y Y Reducing Bushing 1 ex Y orking Size Number in. mm in. mm lat in. mm in. mm psig bar 1/4x1/8 4-2 VV7-SS / /2x1/4 8-4 VV7-SS / Y Y VacuSeal To Male NPT lbow P Male B C orking NPT Size Number in. mm in. mm in. mm in. mm ex lat psig bar 1/8 2-2 CV-SS / /4 4-4 CV-SS / /8 8-6 CV-SS / /2 8-8 CV-SS / Instrumentation Products ivision untsville, AL USA
39 Catalog 4245-VacuSeal VacuSeal ittings Bodies (Continued) Union lbow B rench orking Size Number in. mm in. mm lat psig bar 1/8 2-2 V-SS / /4 4-4 V-SS / /2 8-8 V-SS / / V-SS / V-SS / B Union Tee B rench orking Size Number in. mm in. mm in. mm lat psig bar 1/ JV-SS / / JV-SS / / JV-SS / / JV-SS / JV-SS / B B Union Cross Size Number B rench orking in. mm in. mm in. mm lat psig bar 1/8 2 KV-SS / /4 4 KV-SS / /2 8 KV-SS / /4 12 KV-SS / KV-SS / B B 9 Instrumentation Products ivision untsville, AL USA
40 VacuSeal ittings Catalog 4245-VacuSeal elded Assemblies Male NPT Connector P Male G orking NPT B C 1 ex ex Size Number in. mm in. mm in. mm in. mm lat lat in. mm psig bar fractional 1/8 2-2 V1B-* /16 3/ /4 4-4 V1B-* /16 3/ /8 8-6 V1B-* /16 1 1/ /2 8-8 V1B-* /8 1 1/ Leak Test Port emale NPT Connector P emale C ex G ex orking NPT Size Number in. mm in. mm lat lat in. mm psig bar fractional 1/4 4-4 V1BG-* /4 3/ /8 8-6 V1BG-* /8 1 1/ /2 8-8 V1BG-* /16 1 1/ P G C Leak Test Port Leak Test Port G G G1 G1 C C T T Compression Tube itting Connector (A-LOK) T Tube C ex G ex G1 ex orking O.. Number in. mm in. mm in. mm lat lat lat in. mm psig bar fractional 1/4 4-4 V1LZ-* /2 3/4 9/ /8 4-6 V1LZ-* /8 3/4 11/ /2 8-8 V1LZ-* /16 1 1/16 1 7/ imensions - C,, are typical finger-tight. Change L to a B to select CPI one ferrule connector. Rotating emale Union or maximum pressure ratings reference the Instrument Tubing Selection Guide, found in the Technical Section of your Parker Instrumentation Master Binder. G ex orking Size Number in. mm lat in. mm psig bar 1/4 4-4 V1BV1-* / /4 4-4 V1BV1-* / /2 8-8 V1BV1-* / /2 8-8 V1BV1-* / emale lbow emale Tee Number: MM-44-*VV Number: MJM-444-*VVV 10 Instrumentation Products ivision untsville, AL USA
41 Catalog 4245-VacuSeal VacuSeal ittings elded Modules lbow Modules B1 B2 1 ex 2 ex orking Size Number in. mm in. mm in. mm lat lat psig bar fractional 1/4 MM-44*VMSV /8 3/ /4 MM-44*VMSVMS /8 5/ /4 MM-44*VV /4 3/ /2 MM-88*VV /16 1 1/ Tee Modules B1 B ex 2 ex 3 ex orking Size Number in. mm in. mm in. mm in. mm in. mm in. mm lat lat lat psig bar fractional 1/4 MJM-444*VVVMS /4 3/4 5/ /4 MJM-444*VVMSVMS /4 5/8 5/ /4 MJM-444*VVV /4 3/4 3/ /4 MJM-444*VMSVMSVMS /8 5/8 5/ /2x1/4 MJM-884*VVMSV /16 3/4 15/ Cross Modules Number B1 B2 1 2 orking in. mm in. mm in. mm in. mm in. mm psig bar Size fractional 1/4 MKM-4444*VMSVVV /8 3/4 3/4 3/ /4 MKM-4444*VVVV /4 3/4 3/4 3/ elded Module Information: MKM V V V V 3 Type Size Stainless Steel 316L nd Connections V = emale VacuSeal Swivel VMS = Male VacuSeal Swivel Replace asterisk with 2 to specify Stainless Steel 316L. or additional configurations and sizes contact your local Parker Representative. 11 Instrumentation Products ivision untsville, AL USA
42 VacuSeal ittings Catalog 4245-VacuSeal Gaskets VacuSeal gaskets are compatible with other high quality gasket face seal fittings. Non-Retained lat Style Tx Size Number in. mm in. mm in. mm 1/8 2 VG-* /4 4 VG-* /2 8 VG-* /4 12 VG-* VG-* Retained lat Style Retainer and gasket must be used as an assembly. Note: Nickel Retained lat Style Gaskets utilize a Stainless Steel Retainer Tx Size Number in. mm in. mm in. mm 1/4 4 VGR-* /2 8 VGR-* /4 12 VGR-* VGR-* Non-Retained Grooved Style (TorqTite Gasket) Tx T Size Number in. mm in. mm in. mm in. mm 1/4 4 GVG-* /2 8 GVG-* Tx Tx T Tx Gasket Information Specify gasket material by replacing asterisk with appropriate Number esignator. MATRIAL ORRING NUMBR SIGNATOR XAMPL igh-purity Nickel (electropolished) N 4 VGR-N Stainless Steel3 SS 4 VGR-SS Kel- 12 K 4 VG-K Teflon 12 T 4 VG-T Blind (undrilled) gaskets are available by adding a -BL suffix at the end of the part number. xample: 4 VG-N-BL 1 Parker uses Kel- 81 or equal PCT Polymer Parker uses Teflon or equal PT Polymer 2 Kel- 81 and Teflon are only available for Non-Retained lat Style gaskets 3 Stainless Steel gaskets are Silver plated Retained Grooved Style (Retained TorqTite Gasket) Tx T Size Number in. mm in. mm in. mm in. mm 1/4 4 GVGR-* /2 8 GVGR-* T Tx Kel- 81 is a registered trademark of 3M Company Teflon is a registered trademark of upont Company The retainer of Parker's patented Retained lat Gasket helps to both locate the gasket over the toroid of the gland and hold the gasket in place during assembly, therefore minimizing radial damage to the toroids of the connection. The unique design of the retainer minimizes potential scratches or nicks to the critical toroid surfaces during placement onto the gland. Note: All gaskets must be ordered in increments of Instrumentation Products ivision untsville, AL USA
43 Catalog 4245-VacuSeal VacuSeal ittings Nuts, Caps, and Plugs emale Nut Number Size ex lat Tx in. mm in. mm 2 BV-SS 1/8 7/ BV-SS- 1/4 3/ BV-SS 1/2 1 1/ BV-SS 3/4 1 1/ BV-SS 1 1 3/ Tx Male Nut ex Tx Number Size lat in. mm in. mm 2-BVI-SS 1/8 3/ BVI-SS 4 1/4 5/ BVI-SS 1/2 15/ BVI-SS 3/4 1 5/ BVI-SS 1 1 5/ Short Male Nut Cap ex Tx Number Size lat in. mm in. mm 4 BVI.54-SS 1/4 5/ BVI.65-SS 1/4 5/ C ex Number Size in. mm lat in. mm 4 NV-SS 1/ / NV-SS 1/ / NV-SS 3/ / NV-SS / Cap ith Lanyard C ex Lanyard Length Number Size in. mm lat in. mm in. mm 4 NV-SS-L 1/ / NV-SS-L 1/ / Plug ex Number Size lat in. mm 2 PNV-SS 1/8 3/ PNV-SS 1/4 5/ PNV-SS 1/2 15/ PNV-SS 3/4 1 5/ PNV-SS 1 1 5/ Plug ith Lanyard ex Lanyard Length Number Size lat in. mm in. mm 4 PNV-SS-L 1/4 5/ PNV-SS-L 1/2 15/ Protective Shipping Cap Number Size C-VacuSeal 1/4 4 Taper in the back of nut allows mobility around 90 bends 13 Instrumentation Products ivision untsville, AL USA
44 VacuSeal ittings Catalog 4245-VacuSeal i-lo Products Glands Bodies Tube Butt eld T Tube O.. Number B 1 orking in. mm in. mm in. mm in. mm psig bar fractional 3/8 4-6 V1T3-* /8 4-6 V1T3-* /8 4-6 V1T3-* Tube Butt eld T Tube B C 1 ex orking O.. Number in. mm in. mm in. mm in. mm lat in. mm psig bar fractional 3/8 4-6 VT3-* / Automatic Tube eld T Tube B C 1 ex Tx orking O.. Number in. mm in. mm in. mm in. mm in. mm lat in. mm in. mm psig bar fractional 3/8 4-6 VY3-* / Bulkhead Connector T Tube B C 1 ex 1 ex Panel ole Max. Panel Thick- orking O.. Number in. mm in. mm in. mm in. mm lat lat in. mm Size ness psig bar fractional 3/8 6-4 T32BV-* /4 3/ / Union lbow B rench orking Size Number in. mm in. mm lat psig bar 3/8 4-4 V-SS B Union Tee B rench orking Size Number in. mm in. mm in. mm lat psig bar 3/ JV-SS / B B 14 Instrumentation Products ivision untsville, AL USA
45 Catalog 4245-VacuSeal VacuSeal ittings Nuts Leak Test Port Tx emale Nut ex Tx Size Number lat in. mm in. mm 3/8 4 BV-SS 3/ Male Nut ex Tx Size Number lat in. mm in. mm 3/8 4 BVI-SS 5/ eatured Products TorqTite *Non-Rotational emale Nut Check out the patented TorqTite Self-Aligning ace Seal Gasket Needs no installation tools Virtually eliminates loosening of components due to thermocycling and vibration (i.e. transportation) Seals even on damaged toroids Allows for higher torque without damaging sealing surfaces asy open clean room bag requires no cutting Color coded retainers for material recognition Minimizes particle generation Number: 4 BV-SS-NR Use Parker s Non-Rotational emale Nut to prevent transmission of torque during make-up and therefore minimize twist of componentry which causes stress concentration. Anti-Galling emale Nut Number: 4 BV-GT Use Parker s Anti-Galling emale Nut to ensure consistent makes and remakes without plating or lubrication on emale threads. * Patented Note: Outside dimensions of the Non-Rotational emale Nut and Anti-Galling emale Nut match the 4-BV-SS- on Page Instrumentation Products ivision untsville, AL USA
46 VacuSeal ittings Catalog 4245-VacuSeal Make-Up Instructions lat and Grooved Gasket Assembly Step 1 Remove gasket from packaging. Step 2 Place gasket into female VacuSeal nut. Step 5 olding the backup wrench stationary, tighten the female nut 1/8 turn past fingertight. arning: xtreme over tightening will damage toroid surface and cause potential leakage. lat Gasket Remake Upon remake of flat VacuSeal gasket, a new gasket must be installed for each remake, follow procedures for initial make-up. Step 3 Assemble components and snug to fingertight. Retained Gaskets Assembly Guide retained gaskets over gland face, then continue step 3 of lat and Grooved Gasket Assembly for completion of make-up. Protective Shipping Cap Metallic protector caps are available to protect critical toroid surface from damage see page 12. Step 4 Scribe the hex flat of both the male and female nuts. 16 Instrumentation Products ivision untsville, AL USA
47 Catalog 4245-VacuSeal VacuSeal ittings Instructions ow To Order Parker VacuSeal components are ordered by Number, as listed in this catalog. Replace the asterisk within each Number with the corresponding material designator listed below. Assembly xample: If your system requires a VacuSeal assembly connecting from 1/4" O.. tubing to 1/4" O.. tubing, you may order the following parts. VacuSeal emale Nut VacuSeal Gland VacuSeal Gasket VacuSeal Long Gland VacuSeal Male Nut 4 BV-SS- 4-4 V1T3-SSR 1.10-P 4 VG-N 4-4 V1T3-SSR 1.70-P 4 BVI-SS Note: ach component must be ordered separately. Nomenclature Part numbers of Parker VacuSeal components are constructed from symbols that identify the size, configuration and material of each component. Component xample: Size nd Connections Material* Surface inish (5 μinch Ra) 4-4 V 1 T3 - SSR P Type Overall Length Size: Tube and Pipe are designated by the number of sixteenths of an inch. (i.e. 1/4" Pipe Thread = 4/16" = 4) Metric Tube O.. is designated in millimeters with the suffix M. (i.e. 4-6M V1T3-SSR 1.16) Type: esignate shape of component. (i.e. 1=gland, =elbow, J=tee, K=cross, etc.) *Material: Replace asterisks in Part Number to specify material: SS = Stainless Steel 316 (All non-welded bodies and components) SSR = Stainless Steel 316L VAR SSV = Stainless Steel 316L VIM/VAR Nickel and astelloy C-22 available upon request. orged product will be offered as a 15 RA P or a standard. Size: nd Connections: Specify VacuSeal end first, followed by other corresponding ends: V = VacuSeal M = Buttweld with.25" tube stub length T3 = Buttweld with.75" tube stub length T = Buttweld with various tube stub length Y3 = Buttweld with nd Collar = Socket eld Overall Length: Specify length of component in inches. Note: Contact Parker representative for information on additional materials. VacuSeal nd ata Information VacuSeal *L **C ex ia. Size Thread in. in. in. in. 4 9/ / / / / / / /16.53 *Average Value **imension C is shown in the finger tight position Additional Products MiniButtwelds UltraSeal ittings Parker offers a full line of MiniButtweld products to complement the VacuSeal product line. Please refer to Catalog 4280-MiniButtweld and Catalog 4245-UltraSeal ittings for additional information. 17 Instrumentation Products ivision untsville, AL USA
48 UltraSeal ittings Catalog 4245-UltraSeal June 2006
49 igh Purity Components Catalog 4245-UltraSeal Introduction Parker UP products are designed as leak-free connections where ultrahigh pure conditions are required. UltraSeal products, with their o-ring face seal design, and optional metal o-ring, provide a leak-free seal from vacuum to positive pressure. Cleaning and Packing Ultra-igh Purity OMGA cleaning and packing in a class 100 clean room environment validated per ederal Standard 209, is standard for all electropolished UltraSeal components. Performance Parker igh Purity Components are rated to a helium leak rate of 1 x 10-9 cc/sec utilizing a helium mass spectrometer. Temperature ratings are governed by the choice of o-ring seal materials. 321 Stainless Steel (Silver or -350 to Nickel plated): (-212 to +538 C) luorocarbon: PT: -15 to +400 (-26 to +204 C) -50 to +400 (-46 to +232 C) ratings will be governed by the gland selected for a particular system. orking pressures are rated at room temperature based on a 4-to- 1 design factor. ratings are calculated in accordance with A.N.S.I. Power Piping Code B31.1. Materials UltraSeal components are available in standard 316L, 316L VAR, and 316L VIM/VAR Stainless Steels. Consult your local Parker distributor or factory for details. Refer to tables 1 and 2 for respective material specifications of gaskets and o-rings. Interior (I..) Surface inishes Parker igh Purity components can be supplied with extremely low Ra internal surface finishes to meet requirements of ultra-high purity tubing systems. lectropolished internal surfaces can also be provided. Consult your local Parker distributor or the factory for more information. Index UltraSeal Gland Q1BQ1 Union (elded) pg 4 UltraSeal Gland to Q1 eld-lok Socket pg 4 UltraSeal Gland to Q1Y Automatic Buttweld pg 4 UltraSeal Gland to Q1M MiniButtweld pg 4 UltraSeal Gland Q1T2/Q1TU to Tube Stub Adapter pg 4 UltraSeal Inverted Q1RT3 Gland pg 5 UltraSeal Body to QM MiniButtweld pg 5 UltraSeal Union Q pg 5 UltraSeal to Bulkhead BQ Connector pg 6 UltraSeal Bulkhead Y2BQ to Automatic pg 6 Buttweld Connector UltraSeal to Automatic QY Buttweld Connector pg 6 UltraSeal to QBZ Compression Tube Union pg 6 UltraSeal Union lbow Q pg 7 UltraSeal Union Tee JQ pg 7 UltraSeal Union Cross KQ pg 7 UltraSeal to VacuSeal VQ pg 7 UltraSeal to Socket Q eld Connector pg 7 UltraSeal to Male Q Pipe Connector pg 8 UltraSeal to Male CQ lbow pg 8 UltraSeal Tube QT3 Stub eld lbow pg 8 UltraSeal to Male QAO Connector Straight pg 8 Thread UltraSeal O-Ring Removal Tool pg 9 UltraSeal O-Rings QO pg 9 UltraSeal Plug NQ1 pg 9 UltraSeal Nuts BQ pg 9 O TO ORR UltraSeal pg 10 Copyright 2000, All Rights Reserved. Offer of Sale The items described in this document are hereby offered for sale by Parker annifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale located on page 18. ARNING AILUR, IMPROPR SLCTION OR IMPROPR US O T PROUCTS AN/OR SYSTMS SCRIB RIN OR RLAT ITMS CAN CAUS AT, PRSONAL INJURY AN PROPRTY AMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2 Instrumentation Products ivision untsville, AL USA
50 Catalog 4245-UltraSeal igh Purity Components Make-Up or Leak-tight UltraSeal Assemblies: A positive seal is achieved by advancing the nut no less than 1/4 turn from finger-tight position. hen a sharp rise in torque is felt, the sealing faces have met and the o-ring seal is compressed into its groove. UltraSeal is capable of repeated remakes; advance the nut to a fingertight position and wrench until a sharp rise in torque is felt. No axial clearance is needed to remove components from a system; therefore, other system components are not disturbed. esign The UltraSeal coupling is designed to effect a helium leak-tight seal when the face of the gland makes full metal-tometal contact with the face of the body, compressing the o-ring in the body groove. The UltraSeal gland face and body o-ring groove are precision machined to accept either metallic (S.S.) or synthetic o-ring seals. UltraSeal virtually eliminates turbulence and dead zones within the fitting. The bore diameter of body and gland are matched in all sizes, providing a smoother flow path. At no point does the O-ring seal intrude into the flow path. isassembly Position the o-ring UltraSeal Removal Tool against the seated o-ring and advance the nut to fingertight position. Continue to advance the nut until a sharp rise in torque is felt. The removal tool shoulder will seal against the body face preventing any over torque damage. The o-ring will pinch" and release from the sealing groove. Table 1 TYPICAL RA Material SPCIICATIONS ITTING Material BAR STOCK ORGINGS Stainless Steel ASTM A-276 TYP 316 ASM SA-182 GRA ASM SA-479 TYP 316 Stainless Steel 316L Stainless Steel 316L (VAR) Stainless Steel 316L (VIM/VAR) Material IS MARK IT AT CO TO NSUR Material TRACABILITY RCOMMN TUBING SPCIICATIONS ASM SA-213 ASTM A-213 ASTM A-249 ASM SA-479 TYP 316L ASM SA-182 GRA 316L ASTM A-269 MIL T-8504 MIL T-8506 Table 2 O-RINGS TYPICAL RA Material SPCIICATIONS / TMPRATUR RATINGS Material SPCIICATIONS TMPRATUR RATINGS Metal O-Rings SA AMS-5570 TYP 321-SS (silver plated) SA AMS-5576 TYP 321-SS (silver plated) (-350 to ) (-212 to C) Metal O-Rings SA AMS-5570 TYP 321-SS (nickel plated) SA AMS-5576 TYP 321-SS (nickel plated) (-350 to ) (-212 to C) luorocarbon O-Rings MIL-R TYP 1 (-15 to ) (-26 to C) PT SA AMS-2651 (-50 to ) (-46 to C) ARNING ailure, improper selection or improper use of the products and/or systems described herein or related items can cause death, personal injury and property damage. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale. 3 Instrumentation Products ivision untsville, AL USA
51 UltraSeal Components Catalog 4245-UltraSeal UltraSeal Gland Union (elded) Q1BQ1 Inches Part No. ex * Bore 4-4 Q1BQ1 11/ Q1BQ1 7/ Q1BQ *Note: Machined bore diameters to match machined bore in body. UltraSeal Gland to eld-lok Socket Q1 T 1 P T 1 Inches Part No. Tube O P * Bore orking 4-2 Q1 1/ , Q1 1/ , QI 1/ , QI 3/ , Q1 1/ , Q1 3/ , Q1 1/ , Q1 3/ ,600 *Note: Machined bore diameters to match machined bore in body. UltraSeal Gland to Automatic Buttweld Q1Y T 1 Inches **Auto Part No. T 1 * Bore Buttweld all Size orking 4-4 Q1Y 1/ , Q1Y 1/ , Q1Y 3/ , Q1Y 1/ , Q1Y 3/ , Q1Y 1/ , Q1Y 3/ ,900 ** Note: Machine bore diameters to match machined bore in body. UltraSeal Gland to MiniButtweld Q1M Inches Part No. * Bore T K orking 4-4 Q1M , Q1M , Q1M ,600 *Note: Machined bore diameters to match machined bore in body. UltraSeal Gland to Tube Stub Adapter Q1T2/Q1TU Inches Part No. T 1 * Bore orking 4-4 Q1T2 (CPI ) 1/ , Q1T2 3/ , Q1T2 1/ , Q1T2 3/ , Q1TU (A-lok ) 1/ , Q1TU 3/ , Q1TU 1/ , Q1TU 3/ ,250 *Note: Machined bore diameters to match machined bore in body. 4 Instrumentation Products ivision untsville, AL USA
52 Catalog 4245-UltraSeal UltraSeal Components UltraSeal Inverted Gland to Male Tube eld Q1RT3 Inches Part No. T 1 K 4-4 Q1RT *Note: Machined bore diameters to match machined bore in body. UltraSeal Inverted Gland to Automatic Buttweld Q1RY Inches **Auto Part No. T 1 * Bore Buttweld all Size orking 4-4 Q1RY 1/ ,700 ** Note: Machine bore diameters to match machined bore in body. UltraSeal Gland to Male Tube eld Q1T3 T 1 Inches Part No. T 1 K 4-4 Q1T Q1T Q1T Q1T *Note: Machined bore diameters to match machined bore in body. K UltraSeal Body to MiniButtweld QM K T Inches Part No. T K * Bore ex 4-4 QM /8 6-6 QM / QM /16 *Note: Machined bore diameters to match machined bore in body. X UltraSeal Union Q Inches Part No. ex 4-4 Q 5/ Q 13/ Q 13/ Q 15/ Q 15/ Q 1-3/ Instrumentation Products ivision untsville, AL USA
53 UltraSeal Components Catalog 4245-UltraSeal UltraSeal to Bulkhead Connector BQ Inches Part No. ex R 4-4 BQ 3/ BQ 15/ BQ 1-1/ BQ 1-9/ Note: itting includes LZ bulkhead lock nut. UltraSeal Bulkhead to Automatic Buttweld Connector Y2BQ Inches Part No. ex T 1 R 4-4 Y2BQ 3/ / Y2BQ 15/ / Y2BQ 1-1/ /2.91 Note: itting includes LZ bulkhead lock nut. UltraSeal to Automatic Buttweld Connector QY Inches *Auto Part No. T 1 ex Buttweld all Size 4-4 QY 1/4 5/ QY 1/4 13/ QY 3/8 13/ QY 1/4 15/ QY 3/8 15/ QY 1/2 15/ QY 3/4 1-3/ UltraSeal to Compression Tube Union QBZ/QLZ Inches Part No. Tube O.. ex C A 4-4 QBZ (CPI ) 1/4 5/ QBZ 1/4 13/ QBZ 3/8 13/ QBZ 1/4 15/ QBZ 3/8 15/ QBZ 1/2 15/ QBZ 3/4 1-3/ Inches Part No. Tube O.. ex C A 4-4 QLZ (A-lok ) 1/4 5/ QLZ 1/4 13/ QLZ 3/8 13/ QLZ 1/4 15/ QLZ 3/8 15/ QLZ 1/2 15/ QLZ 3/4 1-3/ Instrumentation Products ivision untsville, AL USA
54 Catalog 4245-UltraSeal UltraSeal Components UltraSeal Union lbow Q Inches Part No. ex L 4-4 Q 9/ Q 3/ Q 7/ Q 1-3/ UltraSeal Union Tee JQ Inches Part No. ex L JQ 9/ JQ 3/ JQ 7/ JQ 1-5/ UltraSeal Union Cross KQ Inches Part No. ex L 4 KQ 9/ KQ 3/ KQ 7/ UltraSeal to VacuSeal VQ Inches Part No. ex 4-4 VQ 5/ VQ 15/ UltraSeal to Socket eld Connector Q T 1 Tube O.. Inches ex P Part No. 4-2 Q 1/8 5/ Q 1/4 5/ Q 1/4 13/ Q 3/8 13/ Q 1/4 15/ Q 3/8 15/ Q 1/2 15/ Q 3/4 1-3/ Instrumentation Products ivision untsville, AL USA
55 UltraSeal Components Catalog 4245-UltraSeal UltraSeal to Male Pipe Connector Q Inches Part No. Pipe Thread ex R 4-2 Q 1/8 5/ Q 1/4 5/ Q 1/4 13/ Q 3/8 13/ Q 1/4 15/ Q 3/8 15/ Q 1/2 15/ Q 1/2 1-3/ Q 3/4 1-3/ UltraSeal to Male lbow CQ Inches Part No. Pipe Thread ex L R 4-4 CQ 1/4 9/ CQ 1/4 3/ CQ 3/8 3/ CQ 3/8 7/ CQ 1/2 7/ CQ 3/4 1-5/ UltraSeal to Tube Stub eld lbow QT3 Inches Part No. * Bore L R ex T 4-4 QT /16.25 UltraSeal to Male Connector Straight Thread QAO Straight Thread Size Inches ex R Part No. 4-2 QAO* 5/ / QAO 7/ / QAO 9/ / QAO 9/ / QAO 3/4-16 7/ QAO 3/ / *Note: Mass flow controller fitting with.125" orifice in straight thread end. itting is assembled with luorocarbon O-Ring. Other materials are available upon request. 8 Instrumentation Products ivision untsville, AL USA
56 Catalog 4245-UltraSeal UltraSeal Components UltraSeal O-Ring Removal Tool Inches Part No. ex 4 O-Ring Removal Tool 11/16 6 O-Ring Removal Tool 7/8 8 O-Ring Removal Tool 1 Note: or O-Ring removal instructions, see page 3. UltraSeal O-Rings QO Stainless Steel Part No. 4QO-SS 6QO-SS 8QO-SS 12QO-SS Material 321 (SILVR PLAT) 321 (SILVR PLAT) 321 (SILVR PLAT) 321 (SILVR PLAT) luorocarbon Rubber Part No. Material Compound 4QO-VI LUOROCARBON 6QO-VI LUOROCARBON 8QO-VI LUOROCARBON 12QO-VI LUOROCARBON Nickel Part No. 4QO-SS-NIC 6QO-SS-NIC 8QO-SS-NIC Material 321 (NICKL PLAT) 321 (NICKL PLAT) 321 (NICKL PLAT) PT Part No. 4QO-T 6QO-T 8QO-T 12QO-T Material Compound PT PT PT PT UltraSeal Plug NQ1 Inches Part No. A 4 NQ NQ NQ NQ UltraSeal Nuts BQ Inches Straight Part No. ex A Thread Size 4 BQ 11/ / BQ 7/8.69 3/ BQ / BQ 1-1/ /16-20 Note: UltraSeal nuts are silver plated (I..) only to provide for lubrication during assembly. UltraSeal Plug Assembly NQ Assembly includes plug, nut and snap ring X Inches Part No. A ex 4 NQ /16 6 NQ /8 8 NQ NQ 1/42 1-1/2 BQI* STRAIGT TRA A X Inches Straight Part No. ex A Thread Size 4 BQI* 5/8.65 9/16-20 *or use with Q1RY inverted glands. A PNQ Inches Straight Part No. ex A Thread Size 4 PNQ 5/8.72 9/ PNQ 13/ / PNQ 15/ / Instrumentation Products ivision untsville, AL USA
57 ow to Order UltraSeal Catalog 4245-UltraSeal Nomenclature UltraSeal coupler part numbers are constructed from symbols that identify the size and configuration of the fitting and material used. ow To Order Parker UltraSeal components are ordered by part number, as listed in this catalog. Note: ach component must be ordered separately. xample: If your system requires an UltraSeal coupler going from 1/4" tubing to 1/4" tubing, you would order the following part. (Keep in mind that you must order each component separately.) To Order: 4 BQ-SS Size 4 UltraSeal Nut Stainless Steel 4-4 Q1T3-SSR Size 4 UltraSeal Gland to Size 4 Male Tube eld Stainless Steel 4 QO-SS Size 4 Stainless Steel O-Ring 4-4 Q1RT3-SSR.035 Size 4 UltraSeal Inverted Gland to Size 4 Male Tube Stainless Steel 4 BQI-SS Size 4 UltraSeal Male Nut eld Size: Tube and Pipe Thread sizes are designated by the number of sixteenths of an inch (1/4" Pipe Thread = 4/16" = 4). Straights, lbows and Tees: Call out the UltraSeal end first, followed by the corresponding Pipe Thread size or eld-lok end. Type: A letter or combination of letters and numbers are used to designate the type of UltraSeal fitting (i.e., = Male Connector, = Union, etc.). See Visual Index for other type fittings. Special ittings: If there is any question as to the fitting desired, particularly for special fitting configurations, it is suggested that a customer print be submitted with the request for quote. Availability: Only items as standard are carried in stock. Non-standard items can be quoted on request for quantities or materials specified. UltraSeal nd ata Information Size UltraSeal Straight Thread *L **C Inches ex iameter 4 9/ / / / /8.50 *Average Value **imension C is shown in the finger tight position 10 Instrumentation Products ivision untsville, AL USA
58 Performance Stainless Sanitary ittings & low Components Catalog Sanitary ittings January 2005
59 Introduction If your processing system demands high performance flow components Your system deserves Parker Performance Stainless. As a global leader in the motion and control industry, Parker annifin understands the pressures of running a modern production facility. ach function is critical, and breakdowns cost money. The last thing you need to be concerned about are products or equipment that do not perform as expected. Parker is committed to supplying sanitary fluid processors with world class flow components, at a price that is affordable. Our only commitment is to your satisfaction. A part is only as good as the whole! At Parker, we believe our components are only a part of the team it takes to service our customers. e rely on a highlytechnical and dedicated worldwide group of distributors and agents referred to as the Performance Team. They deliver the extra value that sets us apart from the pack. Our people lead the race in quality service. As a customer, we want you to be a lifelong member of the Performance Team, and we welcome your continued feedback about our performance. e want this to be the best flow components company in the world, and your role in our success is important. If you are in need of a special part or component, or some other service, please contact us or one of our Performance Team members. INX Introduction...Page 2 Information...Page 3 L ITTINGS lbows...page 4 Tees & Crosses...Page 5 Reducers...Page 6 CLAMP ITTINGS lbows & Reducers...Page 6-7 Tees & Crosses...Page 8 errules...page 9-10 NPT Adapters...Page 11 Adapters...Page 12 angers & Clamps...Page BVL SAT ITTINGS & ULL LIN GASKTS Clamps...Page 14 nd Cap, ex Nut & rench...page 15 Gaskets...Page 16 LO COMPONNTS & AAPTRS Miscellaneous low Components & Adapters...Page GNRAL INORMATION BP Compliant ittings...page 19 Product amily...page 20 Reference Charts...Page 21 Offer Of Sale...Page 22 Parker Performance Stainless...Page 23 Offer of Sale The items described in this document are hereby offered for sale by Parker annifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Parker Performance Stainless Catalog ARNING Copyright 2003,. All RIghts Reserved. AILUR, IMPROPR SLCTION OR IMPROPR US O T PROUCTS AN/OR SYSTMS SCRIB RIN OR RLAT ITMS CAN CAUS AT, PRSONAL INJURY AN PROPRTY AMAG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. 2
60 Information To specify the part completely, start with the description and select each of the additional options shown below. Be sure to denote the material and polish combination. See the example below. PART NUMBR XAMPL CMP Polish Combinations #1 Unpolished I.. and Unpolished O.. Both I.. and O.. are mill or tumbled finish. 1 escription 2 2CMP-7 SIZ / A (inches) Item Size CMP escription Size (inches) Material Polish 3 Material T304 Stainless Steel T316 Stainless Steel T316L Stainless Steel *All ractional Size ittings (.50 or.75) are T316L Stainless Steel #3 Polished I.. and Unpolished O.. Outside diameter is mill #, special order or tumbled finish. [Special Order] #5 Polished O.. and Unpolished I.. Outside diameter is mill #, special order or tumbled finish. [Special Order] #7 Polished O.. and I.. Inside diameter is mechanically polished to 32Ra. Outside diameter is mechanically polished with polish marks blended. Notes about the imension Tables (Item Meets ASM - BP Size Only Specifications) All imension are in inches. all Thickness: - ittings in sizes are manufactured with 16 gauge (.065) wall thickness. - ittings in 4.0 tube size are manufactured with 14 gauge (.083) wall thickness. QUALITY STATMNT: All fittings shall be manufactured using high quality T-304 or T-316L Stainless Steel with an A-269 minimum wall tubing. ittings shall be free of crevices and manufactured within close, industry accepted tolerances. Standard polish shall be 180 grit I and 150 grit O, with capabilities up to 320 grit. ittings shall meet 3A standards where applicable. ull heat traceability shall be made available on all 316L material. ittings.50 through 3.0 shall have a uniform.065 gauge, size 4.0 shall be.083 and size 6.0 shall be
61 Butt eld ittings: LBOS L2S L2S - 90 Tube Bend Long SIZ A B NOMINAL ALL (inches) (inches) TICKNSS CL - 90 Tube Bend Short B NOMINAL ALL (inches) TICKNSS CL L2KS L2KS - 45 Tube Bend Long SIZ A B NOMINAL ALL (inches) (inches) TICKNSS K - 45 Tube Bend Short B NOMINAL ALL (inches) TICKNSS K L2CM - 90 Clamp One nd SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS L2CM L2KM - 45 Clamp One nd SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS L2KM
62 Butt eld ittings: TS & CROSSS L7 L7 - Tee SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS Tee Short SIZ B NOM. ALL (inches) (inches) TICKNSS SORT (TUMBL INIS ONLY) L7R - Reducing Tee (Reduction on Branch) L7R SIZ A B C NOMINAL ALL (inches) (inches) (inches) (inches) TICKNSS 1.5 x x x x x x x x x x x x x L9 - Cross L9 SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS
63 Butt eld ittings: RUCRS L31 - Concentric Reducers L31 SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS 1.5 x x x x x x x x x x x x x L32 - ccentric Reducers L32 Clamp ittings: LBOS SIZ A B C NOMINAL ALL (inches) (inches) (inches) TICKNSS 1.5 x x x x x x x x x x x x x CMP - 90º ll SIZ A B (inches) (inches) (inches) CMP 6
64 Clamp ittings: LBOS & RUCRS 2KMP - 45º LL 2KMP SIZ A B (inches) (inches) (inches) MP - Concentric Reducer 31-14MP SIZ (inches) OVRALL LNGT 1.5 x x x x x x x x x x x x x MP - ccentric Reducers 32-14MP SIZ (inches) OVRALL LNGT 1.5 x x x x x x x x x x x x x
65 Clamp ittings: TS & CROSSS 7MP 7MP - Tee SIZ A B (inches) (inches) (inches) RMP - Size Reduced on Branch 7RMP - Reducing Tee SIZ A B C (inches) (inches) (inches) (inches) 1.5 x x x x x x x x x x x x x x x x x x x MP 9MP - Cross SIZ A B (inches) (inches) (inches)
66 Clamp ittings: RRULS L14AM - Butt elding errule L14AM SIZ A B NOMINAL ALL (inches) (inches) TICKNSS TL14AM - Butt elding errule TL14AM SIZ A B NOMINAL ALL (inches) (inches) TICKNSS MP - Short elding errule 14MP SIZ A B NOMINAL ALL (inches) (inches) TICKNSS AMP - Solid nd Cap 16AMP SIZ (TUB O..) A B (inches) (inches) (inches) 0.50 / /
67 Clamp ittings: RRULS 14RMP - Recessless errule 14RMP SIZ A (inches) B (inches) LMP - Tank elding Spud-Light SIZ A B NOMINAL ALL (inches) (inches) TICKNSS 14LMP MP - Tank elding errule SIZ A B NOMINAL ALL (inches) (inches) (inches) TICKNSS 14MP LV14AM - lowverter errule SIZ A B C NOMINALALL (inches) (inches) (inches) TICKNSS LV14AM
68 Clamp ittings: NPT AAPTRS 21MP - Adapter (N.P.T. Male Threads) 22MP - Adapter (N.P.T. emale Threads) SIZ (T/C x NPT) A (inches) (inches) SIZ (T/C x NPT) A (inches) (inches) 21MP * = No ex ead Reduction on NPT 0.50 x 0.125* x 0.250* x 0.375* x 0.500* x 0.750* x 0.125* x 0.250* x 0.375* x 0.500* x 0.750* x 1.000* x 0.125* x 0.250* x 0.375* x 0.500* x 0.750* x x x x 3.000* x 0.750* x x x x x 2.500* x x x x 2.500* x 3.000* x 4.000* x 1.000* x 1.500* x 2.000* x 2.500* x 3.000* x 1.000* x 1.500* x 2.000* x 2.500* x 3.000* x 4.000* x 1.500* x 2.000* x 2.500* x 3.000* x 4.000* x 6.000* MP * = No ex ead Reduction on NPT 0.50 x 0.125* x 0.250* x 0.375* x 0.500* x 0.750* x 1.000* x 1.500* x 2.000* x 0.125* x 0.250* x 0.375* x 0.500* x 0.750* x 1.000* x 0.750* x x x x 2.500* x 0.750* x x x x x 2.500* x 3.000* x x x x x 2.500* x 3.000* x 4.000* x 1.000* x 1.500* x 2.000* x 2.500* x 3.000* x 1.000* x 1.500* x 2.000* x 2.500* x 3.000* x 1.500* x 2.000* x 2.500* x 3.000* x 4.000* x 6.000*
69 Adapters 19B - eld x Male NPT 19B SIZ A B C NOMINAL (inches) (inches) (inches) TUB SIZ MPR 14MPR - Rubber ose Adapter SIZ A B C (inches) (inches) (inches) (inches) 1.0 x x x x x x x x x x BMP 23BMP - Thermometer Cap SIZ A (inches) (inches)
70 Clamp ittings: ANGRS, CLAMPS 24 - anger 24 SIZ (TUB O..) A B (inches) (inches) (inches) NPT - anger (Includes 3/8" NPT Coupler) 24 NPT SIZ (TUB O..) A B C (inches) (inches) (inches) (inches) MP - igh Bolted Clamp 13MP SIZ (TUB O..) (inches) A (inches) 0.50 / / Size Range:.50 to 8.00 Tube O.. 13MM 13MM - eavy uty Clamp ouble Pin inge SIZ (TUB O..) A (inches) (inches) 1.0/ Size Range: 1.00 to Tube O.. 13
71 Clamp ittings: CLAMPS 13MM - eavy uty Clamp Single Pin inge 13MM SIZ (TUB O..) A (inches) (inches) 0.50 / / Size Range:.50 to Tube O.. 13MLA - Adjustable Clamp SIZ (TUB O..) (inches) A (inches) 1.0 / Size Range: 1.00 to 4.00 Tube O.. 13MLA Bevel Seat ittings: CLAMPS 13IS 13IS - TI-LIN eavy uty Clamp SIZ (TUB O..) (inches) A (inches) 0.50 / / Size Range:.50 to Tube O.. 13ILB 13ILB - TI-LIN Bolted Clamp SIZ (TUB O..) (inches) A (inches) 0.50 / / Size Range:.50 to Tube O.. 14
72 Bevel Seat ittings: SOLI CAP, X NUT, & RNC 16A - Solid nd Cap 16A SIZ A (inches) (inches) ex Union Nut SIZ A B (inches) (inches) (inches) Aluminum ex - rench Single nd 25 SIZ / A (inches)
73 Gaskets GASKTS & O-RINGS Parker Performance Stainless supplies high-quality sanitary gaskets and o-rings for use with the ood, Beverage, airy and Pharmaceutical processing industries. These gaskets and o-rings are precision manufactured from specially formulated elastomer compounds, including Buna-N, PM, Viton, Silicone and PT. All gaskets and o-rings are certified to meet the specifications of A, 3-A Sanitary Standards and USP Class VI for pharmaceutical manufacturing. PROUCT LISTING CLAMP GASKTS 40MPU (BUNA) 40MPU (BUNA-hite) 40MPX (Silicone-hite) 40MPXC (Silicone-Clear) 40MPG (PT) 40MP (PM) 40MPSY (SY) 40MPU (BUNA-langed) 40MP (PM-langed) 40MPX (Silicone-hite-langed) 40MPXC (Silicone-Clear-langed) 40MPSY (SY-langed) A40MPGR (PT-nvelope) ORIIC GASKTS A80MPU (BUNA-Std 1/8" Orifice) A80MP (PM-Std 1/8" Orifice) A80MPSY (SY-Std 1/8" Orifice) GASKT MATRIAL RRNC CART Gasket material is selected based upon a number of factors [temperature, product type, pressure, etc.] The following guide is offered as a reference to assist in the selection of the appropriate elastomer for your application. SCRN GASKTS 40MPSU (Std #10 Mesh*) 40MPUP (Std #33 Perforated*) *Other Mesh Sizes Available BVL SAT GASKTS 40BSO (BUNA) 40BSS-(TM) (PT) R(T) (PT-Medium) (XT) (PT-xtra Thin) 40BS(T) (PT-eavy uty) 40BS (lat) I-LIN GASKTS 40I 40I 40IT 40IV (BUNA) (PM) (PT) (SY) JON PRRY GASKTS 40JPU (BUNA) Q-LIN GASKTS 40Q (BUNA) 40QT (PT) APC GASKTS X (Gray) (Black) 16
74 Miscellaneous low Components & Adapters L2CP7-90 Inspection lbow 2CMP Concentric Reducing ll 31 RMP-Reducing errule-concentric (3A) 32 RMP-Reducing errule-concentric (3A) 14MPT - Tygon ose Adapter 17MP-14 - Adapter (3A) 17MP-15 - Adapter (3A) 31 TMP-Adapter-Reducer-Concentric (3A) 31 MPT-Adapter-Reducer-Concentric (3A) 31 PMP-Reducing errule-concentric (3A) 32 MMP-Adapter-Reducer-Concentric (3A) 14PR Short eld errule (3A) 17
75 Miscellaneous low Components & Adapters 14R Plain Recessless errule (3A) L14A7 - Plain Tube errule (3A) 14- Plain errule Tank Spud (eavy) (3A) 15- Threaded errule Tank Spud (eavy) (3A) L15A7 Threaded Tube errule (3A) 15R-Threaded Recessless errule (3A) 15L-Threaded errule Tank Spud (Light) (3A) 14AR Rubber ose Adapter 14AT-Tygon ose Adapters 15AR Rubber ose Adapter 15AT-Tygon ose Adapters 18
76 BP ittings & Tubing ittings for the Pharmaceutical and Biotech Industries Parker will be launching a line of ASM BP fittings for use within the Pharmaceutical and Biotech Industries. ittings are offered in sizes from 1/2" through 6" in both buttweld and clamp connections to ASM BP standards. I.. finishes will be available in 25RA through 10RA. Special O.. finishes will be available upon request. I.. finishes may be provided in mechanical polish, or with lectropolishing per ASM BP specifications. Material and Traceability Parker offers fittings to BP dimensions in 316L. All fittings are permanently marked with original heat numbers for full traceability back to the original stainless steel supplier. MTR information is provided with each fitting. All tubular materials meet ASTM A269 / A270 requirements and all machined components meet the requirements of ASTM A479. eat Treatment Parker fittings are solution annealed and quenched in a vacuum furnace. This treatment relieves stresses caused by cold forming operations used in the manufacturing process, thereby removing the potential for stress corrosion and improving the dimensional stability of fittings. Polish Options Parker BP fittings are manufactured with standard polished #7 O.. with up to a 10 RA I. finish. Optional finishes and treatment available upon request. ittings Marking ach fitting is marked with the following: Parker logo and Parker BP eat Number Material Alloy ASM BP Surface esignation per ASM BP Inspection Procedures All fittings are 100% visually inspected for surface finish imperfections as mentioned in table S-3 in the ASM BP 2002 specification. All dimensional characteristics are inspected 100% to the tolerances listed in table T-5 in the ASM BP 2002 specification. As a part of rigorous inspection standard, heat number traceability is verified for accuracy and chemical composition, per table T-3, before the fittings are packaged for shipment. Testing includes: Roundness all Thickness Squareness of ace Off Angle Off Plane eight Packaging The ends are capped to prevent damage and contamination. All fittings are packaged in bags. All bags are labeled with Parker Part Number, eat Number(s), ASM BP, and the appropriate ASM BP Surface inish esignation for reorder, traceability and tracking purposes. 19
77 Sanitary low Components Performance Stainless Product amily Parker Performance Stainless offers a wide variety of sanitary flow components for use within the ood, Beverage, airy and Pharmaceutical processing industries. or additional information on any of the products shown below, contact your Parker distributor, or call BALL VALVS 3-Piece ball valves come standard in 316L and with PT cavity filler. Valves may be ordered with customized Parker Actuation for a variety of product applications. IAPRAGM VALVS Parker will be launching a line of diaphragm valves for a variety of applications. Valves will feature class VI seat elastomers, and will offer full traceability with heat numbers. CCK VALVS isk-style check valves are machined from heat-traced 316L stainless, and are available in both sanitary clamp and butt weld versions. PM gaskets are standard (Viton and Silicone special order). BUTTRLY VALVS Butterfly valves will be available in both 4-position and 12- position handle configurations, and may be ordered with customized Parker Actuation. Several seat elastomers are available with platinum cured silicon standard. SANITARY GAUGS Sanitary gauges meet 3A standards and are filled with A approved glycerine. Sanitary clamp connection is standard, and a variety of options is available for pressure and temperature ranges. GASKTS/O-RINGS Parker will offer a wide variety of gaskets and o-rings in materials such as Buna, Silicon, PT, PM and more. Speciality items such as screen gaskets will also be available. Gaskets meet 3A and other regulatory standards. SIGT GLASSS Sanitary sight glasses feature Pyrex glass and offer a visual inspection of product flow. Available in sanitary clamp and butt weld connections. eat-traced 316L and PM gaskets are furnished as standard. INLIN STRAINR Inline Strainers are manufactured for easy interchange with other brands, and feature a variety of filter and screen options for a wide range of process applications. SANITARY TUBING Sanitary tubing is manufactured in accordance with A-270, A-269, A-249 or BP standards. Tubing is available in a variety of polish configurations. SANITARY ITTINGS Sanitary fittings are available in 304SS or heat-traced 316L in both polished and tumble finishes. Call for special finish options or for details on BP- Compliant fittings for your all processing applications. 20
78 Reference Charts Clamp Service Rating Chart in PSI Clamp Gasket Materials Reference Chart *PSI ratings based on hydrostatic test using standard gaskets molded from Buna-N. Ratings assume proper installation of ferrules, joint assembly and the absence of any shock pressure. Please contact Parker annifin for ratings at higher temperatures or utilizing other materials. or temperatures above 250, only 13MP clamps are recommended. imensions of Clamp Connections for O-Tubing 13MLA 13MM Surface inish Reference Chart 13MP 13MM 21
Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree connections for process,
Instrument Pipe & ISO Conversion Fittings Catalog 4260 evised, February 1999 Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products ISO onversion Fittings Visual Index ISO Fitting Nomenclature page 122 Typical Fastening s page 123 Forms
More informationInstrument Pipe & ISO Conversion Fittings
Instrument Pipe & ISO Conversion Fittings Catalog 4260 February 2010 Introduction Catalog 4260 Instrument Pipe Fittings Introduction Instrumentation Pipe Fittings are designed as leak-free connections
More informationUltraSeal Fittings. Catalog 4245-UltraSeal June 2006
UltraSeal Fittings June 2006 High Purity Components Introduction Parker UHP products are designed as leak-free connections where ultrahigh pure conditions are required. UltraSeal products, with their o-ring
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas production
More informationCheck Valves (C Series) Catalog 4130-C Revised, July 2004
Check Valves (C Series) Catalog 4130-C Revised, July 2004 Introduction Parker C Series Check Valves are designed for uni-directional flow control of fluids and gases in industries such as chemical processing,
More informationInstrument Pipe & ISO Conversion Fittings. Catalog 4260 Revised, February 1999
Instrument Pipe & ISO Conversion Fittings Catalog 4260 evised, February 1999 Instrument Pipe Fittings Instrument Pipe Fittings Introduction Parker Instrumentation Pipe Fittings are designed as leakfree
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationIntroduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas productio
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationRotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003
Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick
More informationCheck Valves (CO Series) Catalog 4130-CO Revised, June 2001
Check Valves (CO Series) Catalog 4130-CO Revised, June 2001 Introduction Parker are designed for uni-directional flow control of fluids and gases in industries such as chemical processing, oil and gas
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationProduct Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components.
ittings Metal ace Seal and Weld ittings ittings designed for ultra-high purity conditions for critical applications hese UP fittings are designed for critical applications where ultra-high pure conditions
More informationRelief Valves. Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationRL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted by t
Relief Valves (RL4 Series) Catalog 411-RL Revised, July 2001 RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream pressure exceeds the closing force exerted
More informationTHE PREMIUM QUALITY. Hydraulic Swaging Unit for Pre-Swaging Over 1. Catalog Number 01-5 March, 2009 HYDRAULICSWAGINGUNIT.
TH PRMIUM QUAITY Catalog Number 0-5 March, 009 HYRAUICSWAGINGUNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female
More informationRelief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005
Relief Valves (RL4 Series) Catalog 4131-RL Revised, April 2005 RL4 Series Relief Valve Catalog 4131-RL RL4 Series Relief Valve Introduction Parker RL4 Relief Valves are designed such that when the upstream
More informationTHE PREMIUM QUALITY. Catalog Number 01-5 November,
TH PRMIUM QUAITY Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee T Union Cross
More informationNeedle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001
Needle Valves (VQ Series) Catalog 4110-VQ Revised, July 2001 Introduction Parker VQ Series Needle Valves are the right combination of performance and value for manual or pneumatic onoff control in moderate
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationManifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
More informationFigure 1: HB Series Ball Valve Cross Sectional View DISASSEMBLY WARNING: MAKE CERTAIN THE SYSTEM IN WHICH THE VALVE IS INSTALLLED IS EXHAUSTED OF ALL
Maintenance Instructions MI-142 Revision - HB Series Ball Valve MAXIMUM ALLOWABLE WORKING PRESSURES Table 1 Maximum Allowable Working Pressure versus Seat Material Seat Stainless Steel Material Body Material
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationBall Valves (B Series) Catalog 4121-B Revised, November 2001
Ball Valves (B Series) Catalog 4121-B Revised, November 2001 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationBall Valves (B Series) Catalog 4121-B September 1999
Ball Valves (B Series) Catalog 4121-B September 1999 Two-Way B Series Ball Valves Introduction Parker manually, pneumatically, and electrically actuated two-way B Series Ball Valves provide quick 1/4 turn
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
More informationBall Valves (B Series) Catalog 4121-B January 2006
Ball Valves (B Series) Catalog 4121-B January 2006 B Series Ball Valves Catalog 4121-B Pressure vs. Temperature Pressure (psig) Temperature ( C) -54-18 10 38 66 93 121 149 177 204 232 6500 6000 448 414
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
More informationBall Valves (MB Series) Catalog 4121-MB Revised, January 2005
Ball Valves (MB Series) Catalog 4121-MB Revised, January 2005 Introduction Parker MB Series Ball Valves, with their rugged compact design, offer positive shut off or directional control of fluids in process,
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationFittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationDY Series 1-Piece Ball Valves. Catalog 1001C-A. July 2012 欧陆传动
DY Series 1-Piece Ball Valves Catalog 1001C-A July 2012 欧陆传动 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents
More informationISO 9001 Certified Fitting and Valve Manufacturer
ASM Accredited Nuclear & ISO900 Quality System ISO 900 Certified Fitting and Valve Manufacturer Catalog Number 0- January, 00 HYRAULIC SWAGING UNIT.HS-A Hydraulic Swaging Unit for Pre-Swaging Over Certificates
More informationDK-LOK Hydraulic Pipe Fittings
Class 2000, 3000, 6000, 9000 fittings Catalog No. C-2 June 2012 DK-LOK Hydraulic Pipe Fittings are designed and manufactured to the following standards. ASME B 16.11-2005: Forged fittings, Socket-welding
More informationSnap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationEngineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
More informationHigh Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA July 202 Locations Grantsburg, WI Chetek, WI FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
More informationInstrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationCheck Valves, Filters and Relief Valves
Check Valves, Filters and Relief Valves Catalog 4135-CV December 2010 Series Check Valves Catalog 4135-CV Introduction Parker Series Check Valves are designed for uni-directional flow control of fluids
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, Parker utoclave ngineers has designed and built premium quality valves, fittings and
More informationHi-Pro Ball Valve for High Performance Process Isolation. Catalog 4190-HBV December 2006
Hi-Pro Ball Valve for High Performance Process Isolation Catalog 419-HBV December 26 Hi-Pro Ball Valve for up to 1, psi/689 bar operations Product Description These high performance two piece bi-directional
More informationParker Fluid Control Angle Body Valves
Parker Fluid Control Angle Body Valves Angle Body Valve Key Features RED Position indicator on all models Housing is 304 SS standard, or optional Aluminum Piston ring FKM Brass Piston Pilot port available
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationMulti-Circuit Rotary Block
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Multi-Circuit Block for Rotating Applications Multi-Circuit Rotary Block 302 Make to Order Suitable for Low-Speed Rotating Applications
More informationBELLOWS VALVES. Microelectronics Product Line. Catalog 4506/USA October 2003
BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 BELLOWS VALVES Microelectronics Product Line Catalog 46/USA October 2003 table of contents Veriflo Division................... 1
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationQuick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationInstrumentation Pipe & Weld Fittings. No.03-9 August 2017
Instrumentation ipe & Weld Fittings No.03-9 August 2017 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple
More informationFlare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves
Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core
More informationMedium Pressure Products
Medium Products Fittings and Valves 6,000 15,000 PSI Range Catalog 4234 August 2010 Medium Fittings Catalog 4234 Introduction Hannifin Fittings are engineered and manufactured to provide secure, tight,
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationSection 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1
Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.
More informationNeedle Valves. Catalog 1203/1205 Aug 2012
Catalog 1203/1205 Aug 2012 Visual Index Click on link for desire page. At present image not available BAX-NVFF-01 FEMALE FEMALE Page 8 BAX-NVAMF-05 MALE FEMALE (ANGLE TYPE) Page 12 BAX-NVMFD-09 MALE -
More informationQuick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
More informationInstrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationC-INV V2. Cv Factor : 0.09 ~ 0.73 Orifice : to in. (2mm to 6.4mm) U-PRO fittings Inc.
C-INV-0911-V2 Cv Factor : 0.09 ~ : 0.079 to 0.252 (2 to.4) U-PRO fittings Inc. Materials of Construction 4 3 2 1 Stem of Tip U-PRO integral needle valves are offer ith variety of Stem tips. Starderds are
More information74 Series ISO Interchange
Series ISO 8 Interchange Featuring Snap-tite quality with superior pressure and flow characteristics over the competition. Flush Face/Dry Break design facilitates easy cleaning prior to connection High
More informationGroup 8. High Pressure Fittings and Tubing
Group 8 High Pressure Fittings and Tubing 8 INDEX Page Contents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JIC-JIC 5 0K Fittings JIC-NPT 6 0K Fittings BSP-BSP 7 0K Fittings BSP-JIC, BSP-NPT 8 Adapters
More informationFlow Control Valves Check Valves Gauge Control Valves. Colorflow Valves
Check Valves Gauge Control Valves Colorflow Valves Colorflow and Ball Valves Industrial Flow Control, Check, Gauge Control Catalog HY14-3300/US Colorflow and Ball Valves Fully guided poppets are used on
More informationISO Interchange SERIES
ISO 18 Interchange SERIES Series ISO 18 Interchange Featuring Snap-tite quality with superior pressure and flow characteristics over the competition. Flush Face/Dry Break design facilitates easy cleaning
More informationHigh Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationCertificate of Type Approval (RQS)
Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationMinimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationCG Series Visual Index
Series Visual Index Series Permanent 101 Male Taper Pipe Rigid 102 emale Taper Pipe Rigid 103 Male (I) 37 Rigid 105 Male Str. O-ring 106 S (I) 37 Swivel Series PRMNNT -53-54 -54-54 -55 107 emale Pipe Swivel
More informationins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3
ins bout win Ferrule Compression Fittings 2 nstallation nstructions 3 Conventions mperial Metric Page 4 32 ndex to et-ok mperial Fittings 4-5 -OK (MPR) UB FGS ndex to et-ok Metric Fittings 32-33 mm ndex
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid omponents Product atalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Fittings and Tubing Low Pressure Pressures to 15,000 psi (1034
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationFLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
More informationStainless Steel. Tube, Pipe. Fittings
Components MNUFCTURING SSEMLY TESTING Stainless Steel Tube, Pipe Fittings One Trusted Source - Worldwide If ever there were industries with a low tolerance for imperfection, they would be the semiconductor,
More informationMagneDrives. Agitation
MagneDrives Agitation Parker Autoclave Engineers MagneDrive is a magnetically coupled, packless rotary impeller system designed to provide continuous high speed mixing without leakage or contamination.
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationShinya Nojima President & COO Technology can be found wherever something is flowing The is a leading manufacturer of high-technology products for a wide range of industries. Our corporate policy is to
More informationVibra-Lok Fittings. Example: 68 VL V 4 2
Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and
More informationBall and Plug Valves
Ball and Plug Valves Catalog 4121-BV March 2010 Parker Hannifin Corporation Catalog 4121-BV Table of Contents Description... Page B Series Ball Valves, 6,000 psi Maximum*...3 Two-Way...4 Three-Way...6
More informationNeedle Valves. SM Series. Needle Valves - SM Series. Medium Pressure Valve Features: Medium Pressure. Pressures to 20,000 psi (1379 bar)
Needle Valves edium Pressure S Series Pressures to 20,000 psi (1379 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationLocked Bonnet Needle Valves
Locked Bonnet Needle Valves Series Working Pressures up to 6000 psig (413 bar) Temperature Range from -65 to 1200 F (- 53 C to 648 C) Flow Coefficients up to 2.18 Locked bonnet eliminates accidental disassembly
More informationSTAUFF. Klemmringverschraubungen Twin Ferrule Compression Fittings. Local solutions for individual customers worldwide
STAUFF Klemmringverschraubungen Twin Ferrule Compression Fittings Local solutions for iniviual customers worlwie INDEX UNION SU Union SRU Reucing Union SBHRU Bulkhea Reucing Union SBHU Bulkhea Union CONNECTORS
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationEvans Ball Valves. Evans. High Purity 316 Stainless
Ball Valves High Purity 316 Stainless BA Series 1/4-20 and (15A-489A) s CFOS Cleaned and Bagged Integrated Valve Assemblies Standard Spool Assemblies & Custom Spool engths (Customer Specified In Feet)
More information