13DMP, Styles A and B and 13DEMP, Style A Pneumatic Transmitters

Transcription

1 Parts List January DMP, Styles A and B and 13DEMP, Style A Pneumatic Transmitters NOTE This list contains parts for servicing the pneumatic transmitter only. The sealed measurement system, if inoperative, must be returned to Foxboro for repairs. *Parts preceded by an asterisk are recommended spare parts. Give Instrument Model Number and Style when ordering. See Recommended Spare Parts Summary section for quantities. TO ORDER PARTS, CALL INVENSYS SYSTEMS INC. AT

2 Page 2 MODEL CODE 13DMP Description Model Pneumatic d/p Cell Transmitter with Matched Pressure Seals 13DMP Capsule Code Span Limits (Head of Water) 0.51 and 6.4 m or 20 and 250 in M 5.1 and 21.6 m or 200 and 850 in H Pressure Seal Material and Tubing Length Hastelloy C, 1.5 m (5 ft) CA Hastelloy C, 4.5 m (15 ft) CB Hastelloy C, 8 m (26 ft) CC 316 ss, 1.5 m (5 ft) SA 316 ss, 4.5 m (15 ft) SB 316 ss, 8 m (26 ft) SC Process Flange Material (Nonprocess Wetted) 316 ss S Cadmium Plated Carbon Steel (cs) K Tantalum T Process Flange Connections ANSI 3 in, Class A ANSI 3 in, Class A ANSI 3 in, Class A DN 80, PN 10/40 33D MODEL CODE 13DEMP Description Model Pneumatic d/p Cell Transmitter with Matched Extended Pressure Seals 13DEMP Capsule Code Span Limits (Head of Water) 0.51 and 6.4 m or 20 and 250 in M 5.1 and 21.6 m or 200 and 850 in H Pressure Seal Material and Tubing Length Hastelloy C, 1.5 m (5 ft) CA Hastelloy C, 4.5 m (15 ft) CB Hastelloy C, 8 m (26 ft) CC 316 ss, 1.5 m (5 ft) SA 316 ss, 4.5 m (15 ft) SB 316 ss, 8 m (26 ft) SC Extension Length 50 mm (2 in) mm (4 in) mm (6 in) 6 Process Flange Connections (Nonprocess Wetted) cs, ANSI 4 in, Class 150 K41A cs, ANSI 4 in, Class 300 K43A cs, ANSI 4 in, Class 600 K46A

3 Page 3 13DMP AND 13DEMP PNEUMATIC TRANSMITTERS (Figure 1) 1 B1277PM 1 Cover Assembly (includes screws and gasket, cover [not shown]) 4 Below 1 Relay Mounting Assembly D0124QJ 1/4 NPT (gray) D0124QL R 1/4 (blue) *5 D0124QP 1 Orifice Screw Assembly (Since Sept. 1977) 6 D0123MZ 1 O-ring, 4.5 mm (0.18 in) ID 7 A O-ring, 2.9 mm (0.11 in) ID 8 X0100AA 1 Screw, Fil. H., x U0102MF 1 Clamp *10 C0136HZ 1 Relay Replacement Kit *11 C0100EM 1 Gasket *12 U0103FP 2 Screen 13 X0116CS 2 Screw, Pan H., x Screw, F.H., x 0.750

4 Page 4 15 X0100BX 1 Screw, F.H., x U0102ML 1 Gasket *17 A O-ring (used Jan to Sept. 1977) *18 D0124JG 1 Restrictor (used Jan to Sept. 1977) *19 C0130EF 1 Screw Assembly (used prior to Jan. 1974) *20 D0123MZ 1 O-ring (used prior to Jan. 1974) *21 A O-ring (used prior to Jan. 1974) INTEGRAL AIR FILTER SET WITH FIXED PRESSURE REGULATOR (Figure 2) Below 1 Air Filter Set (items 1-5) B0110FE With copper tube B0127YV With polyolefin coated tube Connector 2 B0110SN 1 Elbow 3 Below 1 Tube B0110FF Copper B0127YM Polyolefin coated X0168FF 2 Shrinkable Tube (used at each end of polyolefin coated tube) *4 B0123HD 1 Filter Regulator 5 X0100AG 2 Screw, Hex H., x Mounting Set (for Figure 2) 6 N0141ZT Mounting Set (items 7-10) Nut, N0141ZW 1 Mounting Bracket 9 Below 4 Screw, Hex H., x X0100NW Plated steel (standard) P0120RN 316 ss 10 D0114SM 1 U-bolt

5 INTEGRAL AIR FILTER SET WITH ADJUSTABLE PRESSURE REGULATOR (Figure 3) Page 5 Below 1 Air Filter Set (items 1-11) B0114BF With copper tube B0127ZF With polyolefin tube 1 B0110SN 1 Elbow Nut, Lockwasher 4 Below 1 Tube B0114ZT Copper B0127YH Polyolefin coated X0166FF 2 Shrinkable Tube (used at each end of polyolefin coated tube) 5 B0114BE 1 Bracket *6 B0123HE 1 Filter Regulator 7 X0100KW 2 Screw, Hex H., x B0110TN 1 Tee Elbow Nut, X0100AG 2 Screw, Hex H., x Supply Pressure Gauges (Used with Above Air Set) (Shown in Figure 3) *12 Below 1 Pressure Gauge P0103YM 0 to 30 psi/0 to 2 bar P0121BL 0 to 200 kpa/0 to 2 kg/cm 2 *12 P0122JD 1 Pressure Gauge (green band)

6 Page 6 ZERO ELEVATION KIT (Figure 4) U0122BS Zero Elevation Kit 1 X0116PB 1 Screw, Socket H., x N0138GB 1 Bracket 3 U0124EZ 2 Screw, Socket H., x X0100ZB 4 Screw, Pan H., x U0122BB 1 Spring Assembly 6 N0138BS 2 Plate ZERO SUPPRESSION KIT (Figure 5) U0122BA Zero Suppression Kit 1 U0122BB 1 Spring Assembly 2 X0116PB 5 Screw, Socket H., x A0100YC 2 Screw, Socket H., x U0102RW 1 Bracket 5 N0138BS 2 Plate

7 Page 7 Table 1. Ermeto Connectors Size 316 ss Brass 1/4 NPT x 6 mm tube U7002AS U7002AU Table 2. Output Signal Test Tee Part No. Qty. Name D6002BK 2 Nipple D6002BL 1 Valve Q0101NE 1 Plug Tee 96000BL 1 Assembly Drawing RECOMMENDED SPARE PARTS SUMMARY Figure Item Part No. Part Name Number of Parts Recommended for 1 Inst. 5 Inst. The following parts are associated with the Relay Mounting Assembly: 1 5 D0124QP Orifice Screw Assembly D0123MZ O-ring, 4.5 mm (0.18 in) ID A O-ring, 2.9 mm (0.11 in) ID C0136HZ Relay Replacement Kit C0100EM Gasket U0103FP Screen U0102ML Gasket The following regulators are used in the Air Filter Sets: 2 4 B0123HD Fixed Pressure Regulator B0123HE Adjustable Regulator Below P0103YM P0121BL P0122JD Pressure Gauge 0 to 30 psi/0 to 2 bar 0 to 200 kpa/0 to 2 kg/cm 2 Green band 20 Inst

8 Page 8 33 Commercial Street Foxboro, MA United States of America Inside U.S.: PHON-IPS Outside U.S.: or contact your local Foxboro representative. Facsimile: Invensys, d/p Cell, and Foxboro are trademarks of Invensys plc, its subsidiaries, and affiliates. All other brand names may be trademarks of their respective owners. Copyright Invensys Systems, Inc. All rights reserved MB 150 Printed in U.S.A. 0103