Flanged Body. Style A

Transcription

1 Parts List PL June 2008 I/A Series Vortex Flowmeters Model 83F-D with FoxCom Communication Protocol Model 83F-T with HART Communication Protocol Model 83F-F with FOUNDATION Fieldbus Communication Protocol Model 83F-A with 4 to 20 ma Analog Output Flanged Body Style A *Parts preceded by an asterisk are recommended spare parts. Give Instrument Model Number and Style when ordering. See Recommended Spare Parts Summary section for quantities. TO ORDER PARTS, CALL INVENSYS SYSTEMS INC. AT

2 Page 2 MODEL CODE Model 83F Intelligent Vortex Flowmeters Flanged Body Description 83F = Intelligent Vortex Flowmeter Flanged Body Electronics Type D = Intelligent Electronics, FoxCom Communication Protocol T = Intelligent Electronics, HART Communication Protocol F = Intelligent Electronics, FOUNDATION Fieldbus Communication Protocol A = 4 to 20 ma Analog and Pulse Electronics Nominal Line Size 3Q = 3/4 in (DN 15) Line Size 01 = 1 in (DN 25) Line Size 1H = 1 1/2 in (DN 40) Line Size 02 = 2 in (DN 50) Line Size 03 = 3 in (DN 80) Line Size 04 = 4 in (DN 100) Line Size 06 = 6 in (DN 150) Line Size 08 = 8 in (DN 200) Line Size 10 = 10 in (DN 250) Line Size 12 = 12 in (DN 300) Line Size Body and Flange Material S = Sizes 3Q to 04: Cast Body/Flange and Shedder (except Code 04S1); CF 8M Material Size 04S1: Fabricated from 316 ss Tubing and Flanges Sizes 06 to 12: Body Fabricated from 304 ss Tubing with 304 ss Flanges K = Sizes 06 to 12: Body Fabricated from 304 ss Tubing with Carbon Steel (A105) Flanges End Connections and Flange Rating Description Used with Line Sizes 1 = ANSI Class 150 Flange, RF, per ASME B16.5 All line sizes 2 = ANSI Class 300 Flange, RF, per ASME B16.5 All line sizes 3 = ANSI Class 600 Flange, RF, per ASME B16.5 Sizes 3Q through 08 only 4 = Metric PN 16 Flange, RF, Finish Form D, per ASME B16.5 Sizes 06 through 08 only 5 = Metric PN 40 Flange, RF, Finish Form D, per DIN 2501 All line sizes 6 = Metric PN 64 Flange, RF, Finish Form E, per DIN 2501 Sizes 02 through 12 only 7 = Metric PN 100 Flange, RF, Finish Form E, per DIN 2501 Sizes 3Q through 08 only 8 = Metric PN 40 Flange, RF, Finish Form C, per DIN 2501 Sizes 3Q through 04 only A = Metric PN 40 Flange, RF, Finish Form N, per DIN 2501 All line sizes B = Metric PN 64 Flange, RF, Finish Form N, per DIN 2501 Sizes 02 through 12 only C = Metric PN 100 Flange, RF, Finish Form N, per DIN 2501 Sizes 3Q through 08 only D = Metric PN 16 Flange, RF, Finish Type B1, per EN Sizes 06 through 08 only (e) F = Metric PN 40 Flange, RF, Finish Type B1, per EN All line sizes (e) H = Metric PN 100 Flange, RF, Finish Type B1, per EN All line sizes (e) Single or Dual Measurement, Isolation Valve, and Manifold S = Single Measurement; No Isolation Valve D = Dual Measurement; Manifold with no Isolation Valve K = Single Measurement, Manifold with one Isolation Valve; CF 8M Stainless Steel L = Dual Measurement, Manifold with two Isolation Valves; CF 8M Stainless Steel Sensor Fill, Temperature Range, and Material Range (with Fill Fluid) D = Fluorolube Fill, 0 to 200 F ( 20 to +90 C) Hastelloy Type CW2M F = Fluorolube Fill, 0 to 200 F ( 20 to +90 C) Stainless Steel Type CF3M R = Silicone Fill, 0 to 400 F ( 20 to +200 C) Hastelloy Type CW2M S = Silicone Fill, 0 to 400 F ( 20 to +200 C) Stainless Steel Type CF3M Extended Temperature Range (No Fill Fluid) (d) C = Unfilled, 400 to 800 F (200 to 430 C) Hastelloy Type CW2M T = Unfilled, 400 to 800 F (200 to 430 C) Stainless Steel Type CF3M Model 83F Code continued on next page

3 Page 3 MODEL CODE (Cont.) Model 83F Intelligent Vortex Flowmeters - Flanged Body (Cont.) Electronics Housing Mounting, Material, and Conduit Connections T = Mounted to Flowtube; Aluminum Housing; 1/2 NPT Conduit Connections (a) R = Remote Mounted; Aluminum Housing; 1/2 NPT Conduit Connections (a) Also must select Cable Length in Options Section. Local Digital Indicator/Configurator or Analog/Pulse Output Indicator N = No Digital Indicator/Configurator or Output Indicator (Blind Unit) J = Digital Indicator/Configurator, Full Function - for Electronics Types -D, -T, and -F only A = Analog Output Indicator (4 to 20 ma); Electronics Type -A only. B = Analog Output Indicator, 10-Division Custom Scale per Sales Order; Electronics Type -A only. (f) E = Pulse Output Indicator; Electronics Type -A only. D = Pulse Output Indicator, 10-Division Custom Scale per Sales Order; Electronics Type -A only. (f) Electrical Safety A = CSA intrinsically safe, Division 1 (not available with Electronics Type -F). CSA explosionproof, Division 1. CSA suitable for Class I, II, and III, Division 2 (not available with Electronics Type -F). FM intrinsically safe, Division 1 (not available with Electronics Type -F). FM explosionproof, Division 1. FM nonincendive, Class I, II, and III, Division 2 (not available with Electronics Type -F). E = ATEX intrinsically safe, II 2 G, EEx ib IIC (not available with Electronics Type -F). N = ATEX protection n, II 3 G, EEx nl IIC (not available with Electronics Type -F). Z = No Approval/Certification Required. Optional Selections Cable Length Selection for Remote Electronics Housing B = 20 ft (6 m) Cable to Connect to Remote Electronics Housing D = 30 ft (9 m) Cable to Connect to Remote Electronics Housing E = 40 ft (12 m) Cable to Connect to Remote Electronics Housing G = 50 ft (15 m) Cable to Connect to Remote Electronics Housing Cleaning for Oxygen or Chlorine Service H = Cleaning of Process Wetted Parts for Oxygen/Chlorine Service per CGA G 4.1 and ASTM G93 (Not with Measurement/Isolation Valve Codes D, K, and L, Size Codes 10 and 12, or extended temperature Sensor Codes C and T) Sensor Plating J = Gold Plated Sensor Foxboro Certificates of Compliance/Conformance L = Standard Certificate of Compliance (ISO 9001) M = Foxboro Material Certification of Process Wetted Metal (BS EN ) Q = Process Wetted Parts Conform to NACE MR-01 Foxboro Certified Calibration Certificate N = Foxboro Calibration and Pressure Test Certification Cable Connections - with Electrical Housing Codes T and R (1/2 NPT) P = Hawke-Type Cable Gland (with Electrical Safety Codes E and Z only) R = PG11 Trumpet Gland (not with flameproof/explosionproof certifications) S = PG13.5 Trumpet Gland (not with flameproof/explosionproof certifications) Welding Certificate (Size Codes 06 through 12 only) (b)(c) F = Welding Certified to the ASME Boiler Code V = Radiographic Examination of Flange Welds (except ANSI 150 and Metric PN 16) X = Welding Certified to the ASME Boiler Code; includes Radiographic Examination Examples: 83F D02S1SDTNA X; 83F T06K7DCRJE GQNX (a) ATEX intrinsically safe certifications not available with 1/2 NPT openings. (b) Select one certificate only. Note that Certificate X includes both F and V certifications. (c) Not available when Size Code 06 or 08 is combined with End Connection Code 1 or 4. (d) Application ALERT: for Extended Temperature Range sensors used in hazardous or volatile gas applications, there is the potential of fugitive emissions to occur through the sensor vented restrictor if the sensor diaphragm were to fail. (e) Contact Invensys if metric flanges per EN are selected. (f) Ten equally spaced divisions; Customer specifies legend and marking.

4 Page 4 INTEGRALLY MOUNTED FLOWMETER ASSEMBLY (Figure 1) 83F-D, -T, AND -F DIGITAL DISPLAY/CONFIGURATOR F-A ANALOG INDICATOR WITH DIGITAL DISPLAY/CONFIGURATOR OR ANALOG INDICATOR F-D, -T, AND -F DIGITAL ELECTRONICS F-D, -T, AND -F DIGITAL ELECTRONICS F-A ANALOG ELECTRONICS F-A ANALOG ELECTRONICS EXTENDED TEMPERATURE RANGE METER STANDARD TEMPERATURE RANGE METER 8

5 Page 5 FLOWMETER ASSEMBLY WITH ISOLATION VALVING (Figure 2) (Also see Figure 1 for Items 10 and 11 without Isolation Valving) Item Part No. Qty. Part Name Below 1 Instruction Manual MI Analog Amplifier (83F A) MI Digital Electronics (83F D), FoxCom Communication MI Digital Electronics (83F T), HART Communication MI Digital Electronics (83F F), FOUNDATION fieldbus Communication 1 B0139CA 1 Plug, Pipe 2 Item 2 is intentionally not used. 3 Note 1 1 Housing Assembly (See Note 1) *4 Below 1 Amplifier and Digital Electronic Module Kit B0194RF Analog Amplifier Kit K0147DZ Digital Electronic Kit, FoxCom Communication K0147HX Digital Electronic Kit, HART Communication K0147VN Digital Electronic Kit, FOUNDATION fieldbus Communication 5 Below 2 Screw, Captive B0138ZY For Analog Amplifier X0173RH For Digital Electronic Modules 6 N0139FR Cable Tie 7 Note 1 1 Bonnet (See Note 1) *8 Below 1 Sensor Replacement Kit (See Note 2) K0148KV Sensor Type D (Hastelloy C with Fluorolube Fill) K0148KU Sensor Type F (316 ss with Fluorolube Fill) K0148KS Sensor Type R (Hastelloy C with Silicone Fill) K0148KR Sensor Type S (316 ss with Silicone Fill) K0148KY Sensor Type C (Hastelloy C, Extended Range) K0148KX Sensor Type T (316 ss, Extended Range) 9 Note 2 1 Sensor (See Note 2) 10 Below 1 Flow Dam (See Note 2) L0112KT K0146HK Extended Temperature (ss) K0146PU Extended Temperature (Hastelloy) 11 Below 1 Gasket (See Note 2) L0121DT K0146HL Extended Temperature (ss) K0146PT Extended Temperature (Hastelloy) 12 Below 1 O-Ring (See Note 2) D0100RP K0147CC Extended Temperature

6 Page 6 FLOWMETER ASSEMBLY WITH AND WITHOUT ISOLATION VALVING (Figures 1 and 2) (Cont.) Item Part No. Qty. Part Name 13 1 Flowtube (See Note 3) 14 X0173MC 4 Bolt (ASTM A193, Grade B7); x 1.5 in 15 B0138QV 2 Cover, Standard 16 Lubricant (See Note 4) *17 B0138QU 2 O-Ring, Cover 18 B0138QZ 2 Cover (for use w/indicator or Display) 19 Below 1 Indicator or Digital Display/Configurator B0138YM Analog Indicator (4 to 20 ma dc) B0135PA Indicator (Pulse Output 12.5 to 100 Hz) B0135PB Indicator (Pulse Output 90 to 400 Hz) B0135PC Indicator (Pulse Output 360 to 1600 Hz) B0135PD Pulse (1440 to 5000 Hz) K0147EK Digital Display/Configurator Kit 20 Below 1 Isolation Manifold B0194VZ (15 to 80 mm [3/4 to 3 in]) B0194WA (100 to 300 mm [4 to 12 in]) B0194WF Extended Temperature (15 to 80 mm [3/4 to 3 in]) B0194WG Extended Temperature (100 to 300 mm [4 to 12 in]) 21 X0173MC 4 Bolt (ASTM A193, Grade B7), x 1.5 in *22 K0146QG 1 Preamplifier Replacement Kit (not shown see Note 7) 23 K0146HP 1 Amplifier Calibration Cable (Option -C) 24 B0139DP 1 Pad, Restraining 25 X0171ZY 1 Nut, N7141HX 1 Hawke Cable Gland (Option -P) 27 N7000AA 1 PG11 Trumpet Gland Connector (Part of Option -R; Note 5) 28 N7141KR 1 PG11 Trumpet Gland (Part of Option -R; Note 5) 29 N7141DW 1 PG13.5 Trumpet Gland Connector (Part of Option -S; Note 6) 30 N7141KC 1 PG13.5 Trumpet Gland (Part of Option -S; Note 6) NOTE 1. This part is not usually replaced. Contact Invensys for replacement parts. 2. Items 9, 10, 11, and 12 are included in the Sensor Replacement Kit (Item 8, Figure 1). 3. Flowtubes are not user replaceable. Return entire Flowmeter to Invensys Systems for repair or replacement and recalibration. 4. Lubricate threads when replacing indicated items with a good commercially available lubricant. 5. Order Items 27 and 28 together as a set. These items are not shown. 6. Order Items 29 and 30 together as a set. These items are not shown. 7. The preamplifier replacement kit includes cable ties, screws, and instructions.

7 Page 7 REMOTE MOUNTED CONFIGURATION (Figure 3) FLOWMETER BODY Item Part No. Qty. Part Name Nut, D0114SM 1 U-Bolt (Not shown) 3 L0112DA 1 Connector, Remote Housing; ss 4 K0146JV 2 Bushing, Silicone Rubber 5 B0185AK 2 Nut, Knurled; ; ss 6 B0185AJ 1 Adapter; ss *7 Below 1 Cable, Remote Mounting K0146JL 6.1 m (20 ft) Long K0146JM 9.1 m (30 ft) Long K0146JN 12.2 m (40 ft) Long K0146JP 15.2 m (50 ft) Long *8 Below 1 Sensor Replacement Kit (Not shown, see Figure 1 and Note 1) K0148KV Sensor Type D (Hastelloy C with Fluorolube Fill) K0148KU Sensor Type F (316 ss with Fluorolube Fill) K0148KS Sensor Type R (Hastelloy C with Silicone Fill) K0148KR Sensor Type S (316 ss with Silicone Fill) K0148KY Sensor Type C (Hastelloy C, Extended Range) K0148KX Sensor Type T (316 ss, Extended Range)

8 Page 8 REMOTE MOUNTED CONFIGURATION (Figure 3) (Cont.) Item Part No. Qty. Part Name 9 Note 1 1 Sensor (Not shown, see Figure 1 and Note 1) 10 Below 1 Flow Dam (Not shown, see Figure 1 and Note 1) L0112KT K0146HK Extended Temperature (ss) K0146PU Extended Temperature (Hastelloy) 11 Below 1 Gasket (Not shown, see Figure 1 and Note 1) L0121DT K0146HL Extended Temperature (ss) K0146PT Extended Temperature (Hastelloy) 12 Below 1 O-Ring (Not shown, see Figure 1 and Note 1) D0100RP K0147CC Extended Temperature 13 Note 1 A/R Lubricant (See Note 2) 14 B0139CA 1 Plug, Pipe 15 Item 15 is intentionally not used. 16 X0173MC 4 Bolt (ASTM A193, Grade B7) x 1.5 in 17 Note 2 1 Bonnet (See Note 3) *18 K0146QG 1 Preamplifier Replacement Kit (See Note 4) *19 N0138MZ 1 O-Ring, Cover (Not shown) 20 L0112DE 1 Mounting Bracket Assembly NOTE 1. Items 9, 10, 11, and 12 are included in Sensor Replacement Kit (Item 8, Figure 1). 2. Lubricate threads when replacing indicated items with a good commercially available lubricant. 3. This part is not usually replaced. Contact Invensys Systems for replacement parts. 4. The preamplifier replacement kit includes cable ties, screws, and instructions).

9 Page 9 DUAL MEASUREMENT FLOWMETER (Figure 4) (Shown with Range Sensors) (SHOWN WITH STANDARD TEMPERATURE RANGE SENSORS)

10 Page 10 DUAL MEASUREMENT FLOWMETER (Figure 4) (Cont.) (Shown with Range Sensors) Item Part No. Qty. Part Name Below 1 Instruction Manual MI Analog Amplifier (83F A) MI Digital Electronics (83F D), FoxCom Communication MI Digital Electronics (83F T), HART Communication MI Digital Electronics (83F F), FOUNDATION fieldbus Communication 1 B0139CA 2 Plug, Pipe (Not shown) 2 Item 2 is intentionally not used. 3 Note 1 2 Housing Assembly (See Note 1) *4 Below 2 Amplifier and Digital Electronic Module Kit (Not shown) B0194RF Analog Amplifier Kit K0147DZ Digital Electronic Kit, FoxCom Communication K0147HX Digital Electronic Kit, HART Communication K0147VN Digital Electronic Kit, FOUNDATION fieldbus Communication 5 Below 2 Screw, Captive (Not shown) B0138ZY For Analog Amplifier X0173RH For Digital Electronic Module 6 N0139FR 4 Cable Ties 7 Note 1 2 Bonnet (See Note 1) *8 Below 2 Sensor Replacement Kit (See Note 2) K0148KV Sensor Type D (Hastelloy C with Fluorolube Fill) K0148KU Sensor Type F (316 ss with Fluorolube Fill) K0148KS Sensor Type R (Hastelloy C with Silicone Fill) K0148KR Sensor Type S (316 ss with Silicone Fill) K0148KY Sensor Type C (Hastelloy C, Extended Range) K0148KX Sensor Type T (316 ss, Extended Range) 9 Below 2 O-Ring (See Note 2) D0100RP K0147CC Extended Temperature 10 Note 2 Sensor (See Note 2) 11 Below 2 Flow Dam (See Note 2) L0112KT K0146HK Extended Temperature (ss) K0146PU Extended Temperature (Hastelloy) 12 Below 2 Gasket (See Note 2) L0121DT K0146HL Extended Temperature (ss) K0146PT Extended Temperature (Hastelloy)

11 Page 11 DUAL MEASUREMENT FLOWMETER (Figure 4) (Cont.) (Shown with Range Sensors) Item Part No. Qty. Part Name 13 Note 1 1 Flowtube (See Note 3) 14 Below 8 Bolt (ASTM A193, Grade B7) X0173MC x 1.5 in; with Dual Measurement Code D. X0173TF x 2.5 in; with Dual Measurement Code L. 15 B0138QV 4 Cover, Standard 16 Note 2 Lubricant (See Note 4) *17 B0138QU 4 O-Ring, Cover 18 B0138QZ 2 Cover (for use w/indicator or Display [Not shown]) 19 Below 2 Indicator or Digital Display/Configurator (Not shown) B0138YM Analog Indicator (4 to 20 ma) B0135PA Indicator (Pulse Output 12.5 to 100 Hz) B0135PB Indicator (Pulse Output 90 to 400 Hz) B0135PC Indicator (Pulse Output 360 to 1600 Hz) B0135PD Pulse (1440 to 5000 Hz) K0147EK Digital Display/Configurator Kit 20 Below 4 Bolt (ASTM A193, Grade B7) X0173MC x 1.5 in; with Dual Measurement Code D. X0173SV x 2.0 in; with Dual Measurement Code L. 21 Note 3 Dual Manifold (See Note 5) 22 Below 1 Stabilizer Bracket K0147DB for Dual Meter K0146HL for Extended Temperature Dual Meter NOTE 1. This part is not usually replaced. Contact Invensys for replacement parts. 2. Items 9, 10, 11, and 12 are included in the Sensor Replacement Kit (Item 8). 3. Flowtubes are not user replaceable. Return entire Flowmeter to Invensys Systems for repair or replacement and recalibration. 4. Lubricate threads when replacing indicated items with a good commercially available lubricant. 5. This part is not usually replaced. Contact Invensys for replacement parts.

12 Page 12 DUAL FLOWMETER REMOTE CONFIGURATION (Figure 5) (Shown with Extended Temperature Range Sensors) (SHOWN WITH EXTENDED TEMPERATURE RANGE SENSORS) FLOWMETER BODY

13 Page 13 DUAL FLOWMETER REMOTE CONFIGURATION (Figure 5) (Cont.) (Shown with Extended Temperature Range Sensors) Item Part No. Qty. Part Name Nut, D0114SM 1 U-Bolt (Not shown) 3 L0112DA 2 Connector, Remote Housing; ss 4 K0146JV 4 Bushing, Silicone Rubber 5 B0185AK 4 Nut, Knurled; ; ss 6 B0185AJ 2 Adapter; ss *7 Below 2 Cable, Remote Mounting K0146JL 6.1 m (20 ft) Long K0146JM 9.1 m (30 ft) Long K0146JN 12.2 m (40 ft) Long K0146JP 15.2 m (50 ft) Long 8 Note 1 A/R Lubricant (See Note 1) 9 B0139CA 1 Plug, Pipe 10 Item 10 is intentionally not used. 11 X0173MC 4 Bolt (ASTM A193, Grade B7) x 1.5 in 12 Note 2 Bonnet (See Note 2) *13 K0146QG 1 Preamplifier Replacement Kit (See Note 3) *14 N0138MZ 1 Cover Gasket (not shown) 15 Below 8 Bolt (ASTM A193, Grade B7) X0173MC x 1.5 in; with Dual Measurement Code D. X0173TF x 2.5 in; with Dual Measurement Code L. 16 Below 2 Sensor Replacement Kit (See Note 4) K0147BZ Sensor Type D K0147BX Sensor Type F K0147BY Sensor Type R K0147BW Sensor Type S K0147AV Sensor Type C B0194QX Sensor Type T

14 Page 14 DUAL FLOWMETER REMOTE CONFIGURATION (Figure 5 ( Cont.) Item Part No. Qty. Part Name 17 Below 4 O-Ring (See Note 4) D0100RP for K0147CC for Extended Temperature 18 Note 1 Sensor (See Note 4) 19 Below 2 Flow Dam (See Note 4) L0112KT for K0146HK for Extended Temperature (ss) K0146PU for Extended Temperature (Hastelloy) 20 Below 2 Gasket (See Note 4) L0121DT for K0146HL for Extended Temperature (ss) K0146PT for Extended Temperature (Hastelloy) 21 Below 4 Bolt (ASTM A193, Grade B7) X0173MC x 1.5 in; with Dual Measurement Code D. X0173SV x 2.0 in; with Dual Measurement Code L. 22 Note 2 Dual Manifold (See Note 5) 23 K0147DD 2 U-Bolt (Extended Temperature only) 24 K0142KX 4 Nut (Extended Temperature only) 25 K0147DC 1 Stabilizer Bracket (Extended Temperature only) 26 L0112DE 1 Mounting Bracket Assembly 27 Note 6 1 Flowtube (See Note 6) NOTE 1. Lubricate threads when replacing indicated items with a good commercially available lubricant. 2. This part is not usually replaced. Contact Invensys for replacement parts. 3. The preamplifier replacement kit includes cable ties, screws, and instructions. 4. Items 17, 18, 19, and 20 are included in the Sensor Replacement Kit. 5. This part is not usually replaced. Contact Invensys Systems for replacement parts. 6. Flowtubes are not user replaceable. Return entire flowmeter to Invensys for repair or replacement and calibration.

15 Page 15 Figure Number Item Number RECOMMENDED SPARE PARTS SUMMARY Part Number 1 and 4 4 Below B0194RF K0147DZ K0147HX K0147VN 8 Below K0148KV K0148KU K0148KS K0148KR K0148KY K0148KX Part Name Amplifier and Digital Electronic Module Kit Analog Amplifier Kit Digital Electronic Kit, FoxCom Digital Electronic Kit, HART Digital Electronic Kit, Fieldbus Sensor Replacement Kit Sensor Type D, Hast. C. w/fluorolube Fill Sensor Type F, 316 ss w/fluorolube Fill Sensor Type R, Hast. C. w/silicone Fill Sensor Type S 316 ss w/silicone Fill Sensor Type C, Hast. C, Extended Range Sensor Type T, 316 ss, Extended Range Number of Parts Recommended for 1 Inst. 5 Inst. 20 Inst B0138QU O-Ring, Cover K0146QG Preamplifier Replacement Kit (Universal) and 5 Item 18 on K0146QG Preamplifier Replacement Kit (Universal) Figure 3 and Item 13 on Figure 5 Item 19 on Figure 3 and Item 14 on Figure 5 N0138MZ O-Ring, Cover 0 1 2

16 Page Commercial Street Foxboro, MA United States of America Inside U.S.: Outside U.S.: or contact your local Foxboro representative. Facsimile: Invensys, Foxboro, FoxCom, and I/A Series are trademarks of Invensys plc, its subsidiaries, and affiliates. All other brand names may be trademarks of their respective owners. Copyright Invensys Systems, Inc. All rights reserved MB 150 Printed in U.S.A. 0608