PART LIST MANUAL MODELS: MWE2W-1 MWE2S-1 MWG2W1 MWE1W-1 MWE1S-1 MWG1W-1 GARLAND 1 & 2 PLATEN ELECTRIC & GAS CLAMSHELL GRILLS WITH PRODUCT RECOGNITION

Size: px

Start display at page:

Download "PART LIST MANUAL MODELS: MWE2W-1 MWE2S-1 MWG2W1 MWE1W-1 MWE1S-1 MWG1W-1 GARLAND 1 & 2 PLATEN ELECTRIC & GAS CLAMSHELL GRILLS WITH PRODUCT RECOGNITION"

Hugo Charles
5 years ago
Views:

MWES- MWGW MANUFACTURED EXCLUSIVELY FOR McDonald's BY GARLAND

1 PART LIST MANUAL GARLAND & PLATEN ELECTRIC & GAS CLAMSHELL GRILLS WITH PRODUCT RECOGNITION MWEW- MWES- MWGW- MODELS: MWEW- MWES- MWGW MANUFACTURED EXCLUSIVELY FOR McDonald's BY GARLAND COMMERCIAL RANGES PART: MWEG&WS- (Rev )

2 CONTENTS Contents CONTENTS INTRODUCTION WARRANTY SHIPPING DAMAGE CLAIM PROCEDURE GRILL EXTERIOR, ALL MODELS GRILL ELEMENT, ELECTRIC MODELS GRILL BURNER, GAS MODELS GRILL BURNER, GAS MODELS (continued) UPPER PLATEN ASSEMBLY, PLATEN GAS MODEL ONLY & PLATEN GAS/ELECTRIC MODELS UPPER PLATEN ASSEMBLY, PLATEN ELECTRIC MODEL ONLY PLATEN LIFTING MECHANISM, ALL MODELS PARTS ID: WIRING HARNESSES, ALL MODELS GRILL ACCESSORIES REVISION HISTORY Page PART: MWEG&WS- (Rev )

3 INTRODUCTION The Garland clamshell grill, manufactured exclusively for McDonald s, provides a method for efficient two-sided cooking, while accommodating a variety of products. The unit will also serve as a flat grill, and meets all of McDonald s standards for safety, efficiency, and cleanliness. WARRANTY This warranty covers defects in material and workmanship under normal use providing that: a) the equipment has not been accidentally or intentionally damaged, altered or misused. b) the equipment is properly installed, adjusted, operated and maintained in accordance with national and local codes and in accordance with the installation instructions provided with this product. c) the warranty serial number affixed to the appliance by us has not been defaced, obliterated or removed. d) an acceptable report for any claim under this warranty is supplied to us. The equipment warranty coverage remains in force for two () years, (parts and labor), from the date the equipment is put into operation. The Garland Group agrees to repair or replace, at it s option, any part that proves to be defective in material or workmanship at no charge for the part or normal labor. We assume no responsibility for installation, adjustments, diagnosis, or normal maintenance such as: lubrication of springs or valves. We exclude failures caused by erratic voltage or gas supplies. We assume no responsibility for travel costs beyond 00 miles round trip, travel other than overland, and overtime costs of repair. We exclude broken glass, paint and porcelain finish, surface rust, gasket material, ceramic material, light bulbs and fuses from normal coverage. We exclude damage or dysfunction caused by fire, flood, and like Acts of God that are beyond the control of The Garland Group. The Garland Group s liability on a claim of warranty shall not exceed the price of the material and/or service, which caused the claim. This warranty is limited and is in lieu of all other warranties, expressed or implied. The Garland Group, our employees, or our agents shall not be held liable for any claims of personal injury or consequential damage or loss. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. SHIPPING DAMAGE CLAIM PROCEDURE Please note that the Garland parts and equipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the equipment. What to do if the equipment arrives damaged:. File a claim immediately regardless of the extent of damage.. Be sure to note, visible loss or damage, on the freight bill or express receipt and have the person making the delivery sign it.. Concealed loss or damage: if damage is unnoticed until the part or equipment is unpacked, notify the freight company immediately, (within days), and file a concealed damage claim. PART: MWEG&WS- (Rev ) Page

4 GRILL EXTERIOR, ALL MODELS TWO PLATEN A 9 0A B A A C B **Intl Only 8A 8 ONE PLATEN B 0B A B A A B **Intl Only 8A &P- Grill Exterior Page PART: MWEG&WS- (Rev )

GRILL EXTERIOR ITEM # PART # DESCRIPTION P P 89 P STD GAS GRIDDLE ETCH A 890 P STD ELECT GRIDDLE 89 P SLIM ELECT GRIDDLE 8 PLATE WA, GAS - STD B PLATE WA, ELECTRIC - STD 8 GRIDDLE PLATE ASSY MWES

BRACKET, LT B 9 FRONT PANEL BRACKET, RT C F98 BOLT 0-X/8 99 BODY SIDE, RT 99 BODY SIDE, LT 8 FRONT SWIVEL CASTER W/BRAKE C 8A 900 REAR SWIVEL CASTER C 9 99 BACK, UPPER (ELECTRIC) 99 BACK, UPPER

CONTACT BLOCK FRONT PANEL, LOWER (PRC) 898 P FRONT PANEL, LOWER WA A FRONT PANEL, UPPER (PRC) 899 P FRONT PANEL, UPPER WA B 990 MSCR, TRUSS HEAD 0- X / UNC SS 8 80 MENNEKES -WAY SOCKET

5 GRILL EXTERIOR ITEM # PART # DESCRIPTION P P 89 P STD GAS GRIDDLE ETCH A 890 P STD ELECT GRIDDLE 89 P SLIM ELECT GRIDDLE 8 PLATE WA, GAS - STD B PLATE WA, ELECTRIC - STD 8 GRIDDLE PLATE ASSY MWES (ETCH) X SLIM/ELECTRIC CK909 KIT FOR &P GAS CONTROL - GAS C 9 CONTROLLER, WATLOW W/ PRC - ELECTRIC C 90 P CONTROLER, BUTTON, HONG KONG, REPROGRAMMED C 80 POWER SWITCH, MAIN C A 98 FRONT PANEL BRACKET, LT B 9 FRONT PANEL BRACKET, RT C F98 BOLT 0-X/8 99 BODY SIDE, RT 99 BODY SIDE, LT 8 FRONT SWIVEL CASTER W/BRAKE C 8A 900 REAR SWIVEL CASTER C 9 99 BACK, UPPER (ELECTRIC) 99 BACK, UPPER (GAS) 0A 99 BACK, SPLIT LOWER 0B 89 P BACK PANEL, ELECTRIC 9 P BACK PANEL, GAS LEG BRACE LOCKING BRACKET, STANDARD 8 LEG BRACE LOCKING BRACKET, SLIM 890 PUSHBUTTON, GREEN C 890 MOUNTING LATCH 890 CONTACT BLOCK FRONT PANEL, LOWER (PRC) 898 P FRONT PANEL, LOWER WA A FRONT PANEL, UPPER (PRC) 899 P FRONT PANEL, UPPER WA B 990 MSCR, TRUSS HEAD 0- X / UNC SS 8 80 MENNEKES -WAY SOCKET (INTERNATIONAL ONLY) 9 9 LON WORK PLATEN UL BOARD (DELTA) 0 LON WORKS PLATEN CE BOARD (WYE) 0 LONWORKS MOUNTING BRACKET 9 EMI LINE - LINE FILTER, LONWORKS OPTION 8 SPEAKER, WATTS CRITI- CAL PART: MWEG&WS- (Rev ) Page

6 GRILL ELEMENT, ELECTRIC MODELS X8 THIS LEVEL X8 THIS LEVEL 8 L L L L L L X THIS LEVEL J C B A E L L L L WHT WHT WHT WHT ORA RED BLK J FRONT OF UNIT P Grill Element Electric Page PART: MWEG&WS- (Rev )

7 GRILL ELEMENT, ELECTRIC MODELS ITEM # PART # DESCRIPTION P P 80 ELEMENT, 00W 08V 80 ELEMENT, 00W 0V N/A 809 ELEMENT, 9W 0V 80 ELEMENT CLAMP 80 ELEMENT COVER BRACKET A 09 INSULATION (CUT TO SIZE) B 8 FIBERGLASS INSULATION X X 8 80 ELEMENT INSULATION COVER 8 THERMOCOUPLE; GRILL PLATE ELECTRIC C A 98 BRACKET - MOTOR SPEED W/CLIPS b 990 CLIP ASSY - PIN c 99 CLIP ASSY - 8 PIN 8 00 CONTACTOR 0V 8 00 CONTACTOR 0V C SOLID STATE RELAY 0 C 0 09 MOTOR SPEED CONTROL C 890 BAYONNET ADAPTER C 8 PAL NUT /-8 8 NUT TWIN WHIZ 0- LOCK * 89 COMM CABLE C 88 TERMINAL BLOCK (CONTROL COMPONENTS) A TERMINAL BLOCK (PHASE CONNECTION, ELEC GRILL) N/A B 90 MAIN TERMINAL BLOCK, CE, MCDS, 0 AMP, ENN C 9 TERMINAL BLOCK, GAS 08, 0, & 0V N/A -SPD FAN RELAY BOARD W SPACERS 8 0 -SPD FAN RELAY MOUNTING BRACKET * NOT ILLUSTRATED CRITI- CAL PART: MWEG&WS- (Rev ) Page

8 GRILL BURNER, GAS MODELS (X) (X) 8A 9 9A 8B 8C 8D 0A 0B 0 9 C B A A B 8 8 L L L 9 B J 8A C 8B J A 0 0 E L L L L WHT WHT WHT WHT ORA RED BLK FRONT OF UNIT GAS VERSION ONLY 8A 8B BACK FRONT PLATEN WYE SYSTEM Page 8 PART: MWEG&WS- (Rev )

9 GRILL BURNER, GAS MODELS CRITI- ITEM # PART # DESCRIPTION P P CAL /8 X / WOVEN FG TAPE,. LG 9 FLUE ASSEMBLY 89 BURNER BOX ASSEMBLY A 9 TRAY STIFFENING PLATE LT & RT B 90 TRAY STIFFENING PLATE 9 TUBE CLOSUE PLATE 80 NUT -/X A 9 ELECTRODE COMBI B 8000 SMSCR-TH-STL-PHIL-B 0-X/ C 9 ELECTRONIC COMBI PLATE 8A 98 GAS LINE 8B GAS LINE (CE) 8C 9 P GAS TUBING 8D 990 P GAS TUBING CE GAS LINE 9A GAS LINE (CE) 0A 9 GAS INLET MANIFOLD 0B 80 MANIFOLD GAS INLET PIPE 890 BAYONNET ADAPTER 09 MOTOR SPEED CONTROL C 988 SOLID STATE RELAY 0 C A 00 CONTACTOR 0V C B 00 CONTACTOR 0V C 88 TERMINAL BLOCK (CONTROL COMPONENTS) C 9 TERMINAL BLOCK (PHASE CONNECTION, GAS GRILL) 8A 0 THERMOCOUPLE (GAS GRILL BURNER) C 8B 8 THERMOCOUPLE C 9A 890 IGNITION MODULE 0V C 9B 98 IGNITION MODULE 0V CE C 0 HEAT SINK NOTE: ADDITIONAL SINK FOR WYE SYSTEM, PLATEN 9 AIR PRESSURE SWITCH C 89 COMMUNICATION CABLE RS8 C 98 HEAT SINK VERTICAL PLATE (CE GAS GRILL) A 98 MOTOR SPEED CONTROL BRACKET B 990 CLIP ASSY - PIN C 99 CLIP ASSY - 8 PIN -SPD FAN RELAY BOARD W SPACERS C 0 -SPD FAN RELAY BOARD MOUNTING BRACKET 8 9 /8 STRAIGHT CONNECTOR / C 9A 880 GAS VALVE (LP)&(NAT) 0V - CE 9B 90 GAS VALVE (NAT) 0V -.WC 9C 9 GAS VALVE (LP) 0V - 0WC PART: MWEG&WS- (Rev ) Page 9

GRILL BURNER, GAS MODELS (continued) CRITI- ITEM #

0B IGNITION CABLE, CE C A 8 BLOWER MOTOR 0VAC C B

80 HEATING ELEMENT 0V 8W C 80 HEATING ELEMENT 0V

INSULATION COVER 80 ELEMENT COVER 8 PAL NUT /-8 8

10 GRILL BURNER, GAS MODELS (continued) CRITI- ITEM # PART # DESCRIPTION P P CAL 0A 880 IGNITION CABLE C 0B IGNITION CABLE, CE C A 8 BLOWER MOTOR 0VAC C B 9 BLOWER MOTOR 0VAC C 80 HEATING ELEMENT 08V 8W C 80 HEATING ELEMENT 0V 8W C 80 HEATING ELEMENT 0V 00W C 80 HEATING ELEMENT BRACKET 80 ELEMENT INSULATION COVER 80 ELEMENT COVER 8 PAL NUT /-8 8 FIBERGLASS INSULATION X X 8 Page 0 PART: MWEG&WS- (Rev )

11 PART: MWEG&WS- (Rev ) Page

12 UPPER PLATEN ASSEMBLY, PLATEN GAS MODEL ONLY & PLATEN GAS/ELECTRIC MODELS 0 9 A C 0 9 B A 9B P- Platen Assembly Gas Page PART: MWEG&WS- (Rev )

UPPER PLATEN ASSEMBLY, PLATEN GAS MODEL ONLY & PLATEN GAS/ELECTRIC MODELS ITEM # PART # DESCRIPTION P GAS P GAS ELEC A 9 PLATEN LID B 00 GASKET, FOAM RUBBER (0. LONG) C 00 GASKET, FOAM RUBBER (.

PLATEN ADJUSTER NUT C 00 MAGNET HOUSING LOCKNUT C 8 00 ADJ SCREW 9A 000 REED SWITCH ASSY 8 C 9B 99 WIRE SPLICE KIT, 8 C 0 8 REED SWITCH BRACKET 8 C REED SWITCH 8 C 98 MAGNET HOLDER ASSEMBLY 8 C 80

13 UPPER PLATEN ASSEMBLY, PLATEN GAS MODEL ONLY & PLATEN GAS/ELECTRIC MODELS ITEM # PART # DESCRIPTION P GAS P GAS ELEC A 9 PLATEN LID B 00 GASKET, FOAM RUBBER (0. LONG) C 00 GASKET, FOAM RUBBER (. LONG) D* 9 GASKET, FOAM RUBBER PURCHASED BY THE FOOT IN ROLLS OF 0 98 PLATEN WEIGHT W/A 890 PLATEN ADJUSTER CAP 9 8 C 9 PLATEN ADJUSTER LOCKNUT C A 0 SHOULDER BOLT (HEX HEAD) C B 8 LOCK NUT 9 9/ HEX PLATEN ADJUSTER NUT C 00 MAGNET HOUSING LOCKNUT C 8 00 ADJ SCREW 9A 000 REED SWITCH ASSY 8 C 9B 99 WIRE SPLICE KIT, 8 C 0 8 REED SWITCH BRACKET 8 C REED SWITCH 8 C 98 MAGNET HOLDER ASSEMBLY 8 C 80 HIGH LIMIT (AUTO RESETTING) C THERMOCOUPLE, PLATEN C 890 BAYONNET ADAPTER 0 P PLATEN ARM ASSEMBLY 8 CARRIAGE BLOCK ASSY (RT) 9 CARRIAGE BLOCK ASSY (LT) 0 80 /IN X DEG. LIQUID TIGHT FITTING 09 /IN X 90 DEG. LIQUID TIGHT FITTING 80 ATX- CONDUIT BLACK 0009 PLATEN/COWL ASSY 08V 00 PLATEN/COWL ASSY 0V 000 PLATEN/COWL ASSY 0V 00 PLATEN/COWL ASSY 0V 98 PLATEN WEIGHT SPACER 8 F8 SCREW-/-0 X IN LONG ALLEN TEFLON WASHER 8000 NUT W/L WASHER -0 SS 8 8 HH MS -0X/ 8-8 SS 8 9 GORETEX WASHER 0 88 / X SS DOWEL PIN * 8 FIBERGLASS INSULATION X. X. * NOT ILLUSTRATED CRITI- CAL 98 MAGNET HOLDER ASSEMBLY 9 9/ HEX PLATEN ADJUSTER NUT PART: MWEG&WS- (Rev ) Page

14 UPPER PLATEN ASSEMBLY, PLATEN ELECTRIC MODEL ONLY C B A B P- Platen Assembly Electric Page PART: MWEG&WS- (Rev )

15 UPPER PLATEN ASSEMBLY, PLATEN ELECTRIC MODEL ONLY ITEM # PART # DESCRIPTION P ELEC A PLATEN LID B 00 GASKET, FOAM RUBBER (0. LONG) C 00 GASKET, FOAM RUBBER (. LONG) D* 9 GASKET, FOAM RUBBER PURCHASED BY THE FOOT IN ROLLS OF PLATEN ADJUSTER CAP 8 C 9 PLATEN ADJUSTER LOCKNUT C A 0 SHOULDER BOLT (HEX HEAD) C B 8 LOCK NUT 9 9/ HEX PLATEN ADJUSTER NUT C 00 MAGNET HOUSING LOCKNUT C 8 00 ADJ SCREW 9A 000 REED SWITCH ASSY 8 C 9B 99 WIRE SPLICE KIT, 8 C 0 8 REED SWITCH BRACKET 8 C REED SWITCH 8 C 98 MAGNET HOLDER ASSEMBLY 8 C 80 HIGH LIMIT (AUTO RESETTING) C THERMOCOUPLE, PLATEN C 890 BAYONNET ADAPTER 0 P PLATEN ARM ASSEMBLY 8 CARRIAGE BLOCK ASSY (RT) 9 CARRIAGE BLOCK ASSY (LT) 0 80 /IN X DEG. LIQUID TIGHT FITTING 09 /IN X 90 DEG. LIQUID TIGHT FITTING 80 ATX- CONDUIT BLACK 0009 PLATEN/COWL ASSY 08V 00 PLATEN/COWL ASSY 0V 000 PLATEN/COWL ASSY 0V 00 PLATEN/COWL ASSY 0V 890 TEFLON WASHER 8000 NUT W/L WASHER -0 SS 8 HH MS -0X/ 8-8 SS 9 GORETEX WASHER 0 88 / X SS DOWEL PIN * 8 FIBERGLASS INSULATION X. X. * NOT ILLUSTRATED CRITI- CAL PART: MWEG&WS- (Rev ) Page

16 PLATEN LIFTING MECHANISM, ALL MODELS Stop Limit Switch Assembly A B A A 9 B 0 - P Lifting Mechanism Page PART: MWEG&WS- (Rev )

17 PLATEN LIFTING MECHANISM, ALL MODELS CRITI- ITEM # PART # DESCRIPTION P P CAL 0 ACTUATOR FRAME, PAINTED A ACTUATOR FRAME BRACE, PAINTED B 99 P ACTUATOR FRAME BRACE 88 ACTUATOR CLEVIS MOUNT 8899 PILLOW BLOCK ASSY 8 A ARM CARRIAGE, SHAFT ASSEMBLY (RT) B ARM CARRIAGE, SHAFT ASSEMBLY (LT) 888 ACTUATOR CROSS MEMBER CLAMP, PAINTED 8 00 LINEAR ACTUATOR C 9 80 SEAL CAP C 0 SHAFT SEAL WIPER, BLACK SOLID 80 SEAL CAP O-RING 89 SEAL CAP MOUNTING BRKT, S/W LT (PAINTED) A 89 SEAL CAP MOUNTING BRKT, S/W RT (PAINTED) 80 #8- O-RING 8 8 CROSS MEMBER, PAINTED 9 LIMIT SWITCH BRACKET 80 LIMIT SWITCH C SCREW 0-X/ SCREW -X WASHER 800 BOLT /-0X NUT SWITCH BRACKET 80 LIMTI SWITCH (OVER TRAVEL) C LOCKWASHER / PIVOT BLOCK 8000 BOLT /-8X/ SCREW -0X NUT BOLT /-X-/ 8000 WASHER 8000 SCREW /-0X/ 800 BOLT /-0X-/ LOCKWASHER 8 PART: MWEG&WS- (Rev ) Page

PARTS ID: WIRING HARNESSES, ALL MODELS Part#:8980 Main Power

=BLK =WHT 9 8 Part#:09 Upper Platen Harness (Molex Plug to Upper

88 0 0 9 8 EXPORT ONLY Part#:898 Upper Platen Harness (Molex Plug

Part#:89808 Main Heater Harness Electric Grills Models (Molex Plug

18 PARTS ID: WIRING HARNESSES, ALL MODELS Part#:8980 Main Power Switch (Molex Plug to Terminal Block) S DETAIL S =ORG =BRN =RED =BLK =WHT 9 8 Part#:09 Upper Platen Harness (Molex Plug to Upper Platen) P DETAIL 0 P 8 88 =BLK 8=RED 9=WHT 0=BRN =BRN 88=GRN EXPORT ONLY Part#:898 Upper Platen Harness (Molex Plug to Upper Platen) P P DETAIL P DETAIL L L L FRONT VIEW Part#:89808 Main Heater Harness Electric Grills Models (Molex Plug to Grill Plate Heating Elements) L L L P L,L,L=BLK,, =RED Page 8 PART: MWEG&WS- (Rev )

PARTS ID: WIRING HARNESSES, ALL MODELS Part#:898 Main

Heating Elements) EXPORT ONLY S DETAIL S,,=BLK,,=WHT P

to Power Switch) =ORG,=BRN =RED =BLK =WHT P Part#:90

Harness (Grill Plate Molex Plug to SSr s Contactor) P

19 PARTS ID: WIRING HARNESSES, ALL MODELS Part#:898 Main Heater Harness Electric Grill (Molex Plug to Grill Plate Heating Elements) EXPORT ONLY S DETAIL S,,=BLK,,=WHT P DETAIL Part#:898 Main Power Switch Harness (Molex Plug to Power Switch) =ORG,=BRN =RED =BLK =WHT P Part#:90 Pushbutton Harness =BLK =WHT S DETAIL S Part#:0 Relay Harness (Grill Plate Molex Plug to SSr s Contactor) P L,L,L=BLK,,=RED,,=BLK L L P DETAIL L L L L PART: MWEG&WS- (Rev ) Page 9

PARTS ID: WIRING HARNESSES, ALL MODELS P DETAIL a Part#: Reed Switch

Speed Fan Harness 0C B 0A A C 0B 0B C 0C 9 0 0 9 B 0A A P DETAIL )

(Terminal Block to Molex Plug) P P DETAIL P Part#: Relay Harness (Grill

20 PARTS ID: WIRING HARNESSES, ALL MODELS P DETAIL a Part#: Reed Switch Harness RED P BLACK 8 YELLOW BLUE 8 YELLOW BLUE WHITE BLACK a Part#:08 Speed Fan Harness 0C B 0A A C 0B 0B C 0C B 0A A P DETAIL ) JUMPER PINS,, ) JUMPER PINS,, 9 0 Part#:0 Terminal Block Harness (Terminal Block to Molex Plug) P P DETAIL P Part#: Relay Harness (Grill Plate Heater Molex Plug to SSR s Contactor) EXPORT ONLY Page 0 PART: MWEG&WS- (Rev )

21 PARTS ID: WIRING HARNESSES, ALL MODELS Part#:8 Mennekes Harness (Mennekes socket to contactor terminal block) L L L E EXPORT ONLY N L L L N E WHT BLU Part#:898 Ignition Harness (Ignition module to Gas valve Molex plug) S9 DETAIL S9 Part#:89 RS 8 Cable (Motor speed control to control board) Part#:9 Lonworks cable (LON Board to control board) PART: MWEG&WS- (Rev ) Page

red red red brown black black red brown brown black black black brown black brown black brown red PARTS ID: WIRING

MCD GRILLS Model MWEW MWEW/S Electrical Specification P DELTA Electric P WYE Electric for H.K.

22 red red red brown black black red brown brown black black black brown black brown black brown red PARTS ID: WIRING HARNESSES, ALL MODELS Wiring Harness part # 0 L L L PLATEN MCD GRILLS Model MWGW MWEW Electrical Specification P DELTA & WYE Gas P WYE Electric Brazil (except H.K. & CHINA) brown black brown red red L L L L L L diagram# Wiring Harness part # 0 L L L Wiring Harness part # 0 L L L PLATEN MCD GRILLS Model MWEW MWEW/S Electrical Specification P DELTA Electric P WYE Electric for H.K. or CHINA black brown red L L L L L L diagram# Wiring Harness part # 0 L L L Models MWES PLATEN MCD GRILLS Electrical Specification P WYE Electric Slim (except H.K., China & Brazil) L brown L red L L black L red L diagram# Page PART: MWEG&WS- (Rev )

MWEW/S Electrical Specification P ALL P ALL red black

23 brown PARTS ID: WIRING HARNESSES, ALL MODELS Wiring Harness part # 0 L L L PLATEN MCD GRILLS Model MWGW MWEW/S Electrical Specification P ALL P ALL red black brown black red L L L diagram# PART: MWEG&WS- (Rev ) Page

24 GRILL ACCESSORIES Description: Part Number: Quantity: Description: Part Number: 808 Quantity: - (Includes all Shown) Description: Part Number: 9 Quantity: Description: Part Number: Quantity: Teflon Sheet (Non Wraparound) Teflon Rear Rod P/#: Teflon Sheet (Non Wraparound) P/#: 990 Teflon Clip P/#: 9 Page PART: MWEG&WS- (Rev )

GRILL ACCESSORIES REVISION HISTORY REV #

Two Lonworks cable photos added, 9 & 90.

25 GRILL ACCESSORIES REVISION HISTORY REV # PAGE ITEM REVISION DETAILS DATE 0 N/A & Platen - part list manual released Oct, 0,9 0, New part number, motor speed control - was 8. Dec,0 New part number 88, was 88, Part number added, 9 June,0, Part # removed; 8080 TOWEL BAR & 909 TOWEL BAR 8 June, 0 Two Lonworks cable photos added, 9 & 90. June, 0 Part number added, new drawing on page June, 0 PART: MWEG&WS- (Rev ) Page

26 Part List Manual & -Platen Electric/Gas Clamshell Grills With Product Recognition Manufactured Exclusively For McDonald s By Garland Commercial Ranges

MASTER SERIES XG36-XPRESS GRILL GAS XG36-S2L (SONIC GRILL)

MASTER SERIES XG36-XPRESS GRILL GAS XG36-S2L (SONIC GRILL) PA R TS LI IS T Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com FORM