SPECIFICATION FOR APPROVAL

Size: px

Start display at page:

Download "SPECIFICATION FOR APPROVAL"

Edith Small
5 years ago
Views:

RoHS ompliant SPEIFIATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-A03 Product Name Product Type: Box-type Metallized Polyester Film apacitor(stacked version) () Product ode ustomer ustomer ode Issue Date 2010-01 Xiamen Faratronic o.

1 RoHS ompliant SPEIFIATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-A03 Product Name Product Type: Box-type Metallized Polyester Film apacitor(stacked version) () Product ode ustomer ustomer ode Issue Date Xiamen Faratronic o. Ltd. Add: 99 Xinyuan Road, Haicang District, Xiamen, hina Domestic business Export business TEL: FAX: Mail: Http: *.The specification are the property of Xiamen Faratronic o.ltd and shall not be copied or used as commercial purposes without permission. Page 1 of 16

2 Box-type metallized polyester film capacitor (Stacked version) Outline Drawing Features Metallized polyester film, stacked construction Plastic case(ul94 V-0),Epoxy resin sealing High dv/dt ability Typical Applications: By-passing, blocking, coupling, decoupling, Pulse logic, timing, oscillator circuits. Inverter for LD monitors, automotive D motor suppression Specifications Reference Standard GB 7332(IE ) limatic ategory 55/105/56 Rated temperature 85 Operating temperature Rated Voltage apacitance Range apacitance Tolerance Voltage Proof -55 ~105 (+85 to +105 : decreasing factor 1.25% per for VR(dc) ) 50/63V, 100V, 250V, 400V, 500V, 630V,700V μF ~ 2.2μF ±5%(J), ±10%(K), ±20%(M) Pattern I:1.6U R (5s), Pattern II:1.4U R (5s) Frequency R 0.1μF R > 0.1μF Dissipation Factor 1kHz 1.0% 1.0% 10kHz 1.5% 1.5% 100kHz 3.0% - Insulation Resistance U R >100V U R 100V MΩ, R 0.33μF s, R >0.33μF MΩ, R 0.33μF 5 000s, R >0.33μF (20,100V,1min) (20,10V,1min) Page 2 of 16

3 Part number system The 18 digits part number is formed as follow: Pattern I (High performance) Pattern II (Reduced size) S Digit 1 to 3 Series code of film capacitor =L23B Digit 4 to 5 D rated voltage 1H=50V 1J=63V 2A=100V 2E=250V 2G=400V 2H=500V 2J=630V 1V=700V Digit 6 to 8 Rated capacitance value For example : 103= pf=0.01uf Digit 9 apacitance tolerance J=±5%,K=±10%, M=±20% Digit 10 Lead pitch 2=5.0 Digit 11 Internal use S=pattern II Digit 12 to 15 Lead form and packaging code Digit 16 to 18 Internal use Table 1 lead dimensions and packaging code Digit 12 Digit 13 Digit 14 Digit 15 code explanation code explanation code explanation code explanation A ammo-pack 2 F=5.0mm 0 straight 1 each cap. among two consecutive holes P3=12.7mm,H=18.5mm (For pitch=5.0mm) straight lead code in the figure above 00 explanation standard lead length (18mm~22mm) 0 Length tolerance ±0.5mm Or standard length 45 lead length 4.5mm Page 3 of 16

4 Dimensions(mm) apacitor Thickness: T 3.5 >3.5 Dimension Tolerance (W, H, T) ±0.2 ±0.4 Pattern II (Reduced size) 50Vdc (30Vac)/63Vdc (40Vac) # 100 Vdc (63Vac) (F) (F) J154-2S**** A104-2S**** J184-2S**** A124-2S**** J224-2S**** A154-2S**** J274-2S**** A184-2S**** J334-2S**** A224-2S**** J394-2S**** A274-2S**** J474-2S**** A334-2S**** J564-2S**** A394-2S**** J684-2S**** A474-2S**** J824-2S**** A564-2S**** J105-2S**** A684-2S**** J155-2S**** A824-2S**** J225-2S**** A105-2S**** Vdc (140Vac) 400 Vdc (160Vac) (F) (F) E223-2S**** G562-2S**** E273-2S**** G682-2S**** E333-2S**** G822-2S**** E393-2S**** G103-2S**** E473-2S**** G123-2S**** E563-2S**** G153-2S**** E683-2S**** G183-2S**** E823-2S**** G223-2S**** E104-2S**** G273-2S**** E124-2S**** G333-2S**** E154-2S**** G393-2S**** E184-2S**** G473-2S**** E224-2S**** G513-2S**** G563-2S**** G683-2S**** G823-2S**** G104-2S****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10%,J=±5% 2. **** =lead form and packing code (refer to table 1). 3. # when the rated voltage is 50VD,the digit 4~5 is 1H. Page 4 of 16

5 Pattern II (Reduced size) 500 Vdc/630(220Vac) # 700 Vdc (250Vac) (F) (F) J182-2S**** V102-2S**** J222-2S**** V122-2S**** J272-2S**** V152-2S**** J332-2S**** V182-2S**** J392-2S**** V222-2S**** J472-2S**** V272-2S**** J562-2S**** V332-2S**** J682-2S**** V392-2S**** J822-2S**** V472-2S**** J103-2S**** V562-2S**** J123-2S**** V682-2S**** J153-2S**** V822-2S**** J183-2S**** V103-2S**** J223-2S**** V123-2S**** J273-2S**** V153-2S**** J333-2S**** V183-2S**** V223-2S****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10%,J=±5% 2. **** =lead dimensions and packing mode code (refer to table 1). 3. # when the rated voltage is 500VD,the digit 4~5 is 2H. Page 5 of 16

6 Pattern I (High performance) 50Vdc (30Vac)/63Vdc (40Vac) # 100 Vdc (63Vac) (F) (F) J102-20**** A102-20**** J122-20**** A122-20**** J152-20**** A152-20**** J182-20**** A182-20**** J222-20**** A222-20**** J272-20**** A272-20**** J332-20**** A332-20**** J392-20**** A392-20**** J472-20**** A472-20**** J562-20**** A562-20**** J682-20**** A682-20**** J822-20**** A822-20**** J103-20**** A103-20**** J123-20**** A123-20**** J153-20**** A153-20**** J183-20**** A183-20**** J223-20**** A223-20**** J273-20**** A273-20**** J333-20**** A333-20**** J393-20**** A393-20**** J473-20**** A473-20**** J563-20**** A563-20**** J683-20**** A683-20**** J823-20**** A823-20**** J104-20**** A104-20**** J124-20**** A124-20**** J154-20**** A154-20**** J184-20**** A184-20**** J224-20**** A224-20**** J274-20**** A274-20**** J334-20**** A334-20**** J394-20**** A394-20**** J474-20**** A474-20**** J564-20**** A564-20**** J684-20**** J824-20**** J105-20****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10%,J=±5% 2. **** =lead form and packing code (refer to table 1). 3. # when the rated voltage is 50VD,the digit 4~5 is 1H. Page 6 of 16

7 Pattern I (High performance) 250 Vdc (160Vac) 400 Vdc (200Vac) (F) (F) E102-20**** G102-20**** E122-20**** G122-20**** E152-20**** G152-20**** E182-20**** G182-20**** E222-20**** G222-20**** E272-20**** G272-20**** E332-20**** G332-20**** E392-20**** G392-20**** E472-20**** G472-20**** E562-20**** G562-20**** E682-20**** G682-20**** E822-20**** G822-20**** E103-20**** G103-20**** E123-20**** G123-20**** E153-20**** G153-20**** E183-20**** G183-20**** E223-20**** G223-20**** E273-20**** G273-20**** E333-20**** G333-20**** E393-20**** G393-20**** E473-20**** G473-20**** E563-20**** E683-20**** E823-20**** E104-20**** E124-20**** E154-20****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10%,J=±5% 2. **** =lead form and packing code (refer to table 1). Page 7 of 16

8 Pattern I (High performance) 500 Vdc (220Vac) 630 Vdc (220Vac) (F) (F) H102-20**** J102-20**** H122-20**** J122-20**** H152-20**** J152-20**** H182-20**** J182-20**** H222-20**** J222-20**** H272-20**** J272-20**** H332-20**** J332-20**** H392-20**** J392-20**** H472-20**** J472-20**** H562-20**** J562-20**** H682-20**** J682-20**** H822-20**** J822-20**** H103-20**** J103-20**** H123-20**** J123-20**** H153-20**** J153-20**** H183-20**** J183-20**** H223-20**** H273-20****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10%,J=±5% 2. **** =lead form and packing code (refer to table 1). Page 8 of 16

9 Maximum permissible voltage change per unit of time Pattern Ⅰ Rated Voltage(V) Max dv/dt(v/us) 50/ Pattern Ⅱ Rated Voltage(V) Max dv/dt(v/us) 50/ / Note: 1 Rated voltage pulse slope (dv/dt) R at rated voltage. 2 If the working voltage(u) is lower than the rated voltage(u R ),the capacitor can be worked at a higher dv/dt. In this case, the maximum allowed dv/dt is obtain by multiplying the right value with U R /U. Page 9 of 16

10 MAX. VOLTAGE(Vr.m.s) VERSUS FREQUENY Pattern II (Reduced sized) Note: sinusoidal wave-form environment temperature 75,internal temperature rise T=10, p (pitch) in mm.. Page 10 of 16

11 MAX. VOLTAGE(Vr.m.s) VERSUS FREQUENY Pattern I (High performance) Note: sinusoidal wave-form environment temperature 75,internal temperature rise T=10, p (pitch) in mm.. Page 11 of 16

12 2 Test Method And Performance No. Item Performance Test method (IE ) apacitance tolerance Tangent of the loss angle Dielectric strength J(5), K(10), M(20) tg0.010(1khz) tg0.015(10khz) tg0.030(100khz, <0.1μF) There shall be no breakdown or flashover. 1kHz, 3U R (Vrms)max. 1KHz or 10 KHz or 100 KHz 3%U R (Vrms) or 1 Vrms(whichever is the minor) Type I: 1.6U R, 5s Type II: 1.4U R, 5s U R 100V, harging voltage 10V U R 100V, harging voltage 100V 20, measuring after applying voltage for 1 minute Insulation resistance U R 100V R 0.33μF, MΩ R >0.33μF, 5 000s U R >100V R 0.33μF, MΩ R >0.33μF, s Solderability Good quality of tinning Solder temperature:245 5 Immersion time: 2.0s0.5s Initial measurement apacitance Tg(10kHz) There shall be no visible damage Terminal strength Resistance to solder he at Final measurement There shall be no visible damage / 2(relative to the initial value) Increase of tg:0.003(10khz) Tension Ua1: Pull: d=0.5mm,5n; d=0.6mm,10n Bend Ub: The pull of bend: d=0.5mm, 2.5N d=0.6mm, 5N The terminals shall be bent 2 times in each direction. Solder temperature:260 5 Immersion time: 10s1s 7 8 omponent s resistance of solvents Initial measurement Rapid change of tempe rature Vibration Bump The dimensions shall reach the requirement of Table 1, and the change of capacitor weight shall not beyond 1%. apacitance Tg(10kHz) There shall be no evidence of deterioration. There shall be no evidence of deterioration. There shall be no evidence of deterioration. Solvent: Industrial isopropanol. Solvent temperature:23 ±5 Immersion time:5min±0.5min Reverting time:48h A =-55, B = cycles, Duration: t=30min Amplitude 0.75mm or acceleration 98m/s 2 (whichever is the smaller severity), f: 10Hz to 500Hz.Three directions, 2h foreach direction, total 6h times, Acceleration: 390m/s 2,Pulse duration, 6ms 9 Final measurement climate sequence Initial measurement Dry heat / 5(relative to the initial value) Increase of tg: (10kHz) IR: 50 of the rated value apacitance Tg(10kHz) +100,16h Page 12 of 16

13 No. Item Performance Test method (IE ) Damp heat, yclic old Test Db, Severity: b, the first cycle -55, 2h 9 10 climate sequence (continu e) Low air pressure Damp heat, cyclic other Final measu rement Damp heat steady state 11 Endurance There shall be no permanent break d own, flashover or other harmful defo rmation when applying U R at the last 1 minute. There shall be no evidence of deterioration and the marking shall be legible. / 5(relative to the initial value) Increase of tg: 0.005(10kHz) IR: 50 of the rated value There shall be no evidence of deterioration and the marking shall be legible. / 5(relative to the initial value) Increase of tg 0.005(10kHz) IR: 50 of the rated value There shall be no evidence of deterioration and the marking shall be legible. / 5(relative to the initial value) Increase of tg: (10kHz) IR: 50 of the rated value 15 ~35,8.5kPa, 1h, Test Db, Severity b, the other cycles, Applying U R for 1 minute after the test finished. Temperature:40 2 Humidity: %RH Duration: 56 days Temperature: +85 /+100 Voltage: 1.25 U R /1.25 Uc (Uc=0.8U R ) Duration: 2 000h 12 Temperature characteristic Measuring capacitance at test point b, d, f: haracteristic at lower category temperature -55 : -10%( b - d )/ d 0% haracteristic at upper category temperature +105 : 0%( f - d )/ d +10% I.R. (test at point f ): U R 100V: 75MΩ (0.33μF) 25s (>0.33μF) U R >100V: 150MΩ (0.33μF) 50s (>0.33μF) Static method:the apacitors should be kept at the following temperature in turn: a(20±2), b( 55±3), d(20±2),f(+105±2), g(20±2) Page 13 of 16

14 No. 13 Item Performance Test method (IE ) harging and discharging / 5(relative to the initial value) Increase of tg: (10kHz, 1.0μF) (1kHz, >1.0μF) IR: 50 of the rated value Times: Duration of charging: 0.5s Duration of discharging: 0.5s harging voltage: rated voltage harging resistance: 220/ R () Discharging resistance: R=10/R() or 20(whichever is the greater) R : rated capacitance (μf) Note: Please test it follow the serial number. 3 Marking Page 14 of 16

15 4 Taping specification for box-type capacitor Outline Drawing Fig.1 P= mm Fig.2 P= mm Taping Dimensions(mm) Technology index title ode Dimensions P=5.0 P=7.5 P=10.0 P=15.0 Tolerance Taping type Fig 1 Fig 1 Fig2 Fig 2 Part number Ammo- A201 A301 A405 A605 Digit12-15 pack Taping pitch P ±1.0 Feed hole pitch P ±0.2 enter of wire P ±0.7 enter of body P ±1.3 Pitch of taping wire omponent alignment Height of component from tape center F ** S ±2.0 H *** ±0.5 arrier tape width W Hold down tape width W 0 6min 12min 12min 12min Hole position W ±0.5 Hold down tape sition W 2 1.5max 1.5max 1.5max 1.5max Feed hole dia. D ±0.2 Tape thickness t ±0.2 Packing Quantity Pitch (mm) / Box thinkness Ammo-pack (pcs/box) T(mm) Domestic Export Note: * P 0 =15mm is also available; **F can be other lead spacing; ***H=16.5mm is available; Page 15 of 16

16 5 Packing in bulk 5.1Out packing box for bulk 5.2 Inner packing box for bulk L:375mm L:355mm B:375mm B:175mm H:265mm H:118mm Plane drawing Overlooking Drawing Plane drawing Overlooking Drawing 薄膜电容器收货方 : 型薄膜电容器中国厦门法拉电子股份有限公司制造中国厦门法拉电子股份有限公司制造发货方 : 中国厦门法拉电子股份有限公司标称电容量电容量偏差额定电压 (V) 引出线形状数量 ( 只 ) 包装日期标称电容量电容量偏差 5.3 Box size forammo-pack A=48±3; B=260±3; =330±3 Page 16 of 16

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL RoHS ompliant SPEIFIATION FOR APPROVAL Product Name Product Type Uncoated Metallized Polyester Film apacitor(stacked version) 25(L25 Series) Product ode ustomer ustomer ode Issue Date 216-9 Xiamen Faratronic