MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C
|
|
|
- Moris Price
- 5 years ago
- Views:
Transcription
1 Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low pulse operation Dielectric Polyester Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case with resin sealing (UL 94 V-0). Flame retardant execution Construction Extended metallized film (refer to general technical information). Internal series connection for Ur 1000Vdc Terminals Tinned copper wire (lead-free) Reference standard IEC 60384/2, IEC 60068, RoHS compliant Climatic category 55/100/56 (IEC 60068/1), FMD (DIN40040) Operating temperature range (case) C Nominal Capacitance (Cn) µf 0,022µF to 200µF, in compliance with IEC 60063, E6 series. Refer to article table Capacitance tolerance (at 1kHz) ±10% (code=k), ±5% (code=j), ±20% (code=m). Other tolerances upon request Capacitance temperature coefficient Refer to General Technical Information Long term stability (at 1kHz) Capacitance variation ±3% for Cn 0,1µF; ±2% for Cn>0,1µF after a period of 2 years at standard environmental conditions Rated voltage (Ur) (Vdc) at 85 C 63, 100, 160, 250, 400, 630, 1000 Vdc Permissible AC voltage at 60Hz (Vac) 40, 63, 90, 160, 200, 220, 400 Vac Category voltage (Uc) Uc=Ur at +85 C; Uc=0,8xUr at +100 C Temperature de-rated voltage For T > +85 C, Ur must be decreased 1,25% for every C exceeding +85 C Self inductance 1nH/mm of capacitor pitch Maximum pulse rise time V/µs Refer to article table. The pulse characteristic Ko depends on the voltage waveform. In any case the value given in the article table must not be exceeded Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C Freq. Cn 0.1 μf 0.1 μf < Cn 1 μf Cn > 1 μf 1kHz kHz Insulation resistance ( ) Measured between terminals, at 25± C, after 1 minute of electrification at 100Vdc for Ur 100Vdc and 50Vdc for Ur<100Vdc Ur Cn μf 3750 MΩ > μf MΩ 100 > 0.33 μf 1250 s > 100 > 0.33 μf s Test voltage between terminals (Ut) 1,6xUr (DC) applied for 2s at 25±5 C (1 minute for type test) Damp heat test (steady state) Test conditions: Temperature = +40 ±2 C Relative humidity =93 ±2% Test duration = 56 days Performance: Capacitance change ±5% DF change at 1kHz 50% of initial limit value Endurance test Test conditions: Temperature= +85±2 C Test duration= 2000h Voltage applied=1,25xur(dc) Performance: Capacitance change ±5% DF change at 10kHz for Cn 1μF DF change at 1kHz for Cn > 1µF 50% of initial limit value Resistance to soldering heat test Test conditions: Solder bath temperature= +260±5 C Dipping time (with heat screen)= 10±1s Performance: Capacitance change ±2% DF change at 10kHz for Cn 1μF DF change at 1kHz for Cn > 1µF 50% of initial limit value Reliability (MIL HDB 217) Application conditions: Applied voltage= 0,5 x Ur(DC) Temperature= +40±2 C Failure rate: (1FIT=1x10-9 failures/components x hours) 5FIT Failure criteria (DIN44122): Capacitance change > ±10% DF change > 2 x initial value < 0,005 x initial limit value Short or open circuit Ed. 04 Rev
2 MTB article table (different values available upon request) ICEL CODE , , MTB *E# , MTB *E# , , MTB *E# , , MTB *E# ,3 7,5 13, , MTB *E# , ,5 22,5 0, MTB *G# ,7 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , , MTB *E# , ,5 22,5 0, MTB *G# , ,5 22,5 0, MTB *G# ,5 0, MTB *H# ,5 22,5 0, MTB *G# ,5 0, MTB *H# ,5 0, MTB *H# , ,5 0, MTB *H# ,5 0, MTB *H# ,5 37,5 0,8 0,8 100 MTB *J# ,5 0, MTB *H# ,5 37,5 1 0,8 100 MTB *J# ,5 37,5 1 0,8 100 MTB *J# ,5 37,5 1,2 0,8 100 MTB *J# ,5 1,2 0,8 100 MTB *J# , , MTB *E# , , MTB *E# , , MTB *E# , MTB *E# ,5 7,5 13, , MTB *E# , ,5 22,5 0, MTB *G# ,2 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , , MTB *E# , ,5 22,5 0, MTB *G# ,7 8, ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 26,5 22,5 0, MTB *G# , ,5 0, MTB *H# Ed. 04 Rev
3 ICEL CODE ,5 22,5 0, MTB *G# ,5 0, MTB *H# ,5 0, MTB *H# ,5 0, MTB *H# ,5 0, MTB *H# ,5 37,5 0,8 1,2 240 MTB *J# ,5 0, MTB *H# ,5 37,5 1 1,2 240 MTB *J# ,5 37,5 1 1,2 240 MTB *J# ,5 37,5 1,2 1,2 240 MTB *J# ,5 37,5 1,2 1,2 240 MTB *J# ,5 1,2 1,2 240 MTB *J# , , MTB *E# , , MTB *E# , , MTB *E# ,5 13, , MTB *E# ,5 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , , MTB *E# , ,5 22,5 0, MTB *G# ,3 8, ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 22,5 0, MTB *G# , ,5 0, MTB *H# ,5 0, MTB *H# ,5 0, MTB *H# ,5 0, MTB *H# ,5 37,5 0,8 2,2 700 MTB *J# ,5 37,5 1 2,2 700 MTB *J# ,5 37,5 1 2,2 700 MTB *J# ,5 37,5 1,2 2,2 700 MTB *J# ,5 37,5 1,2 2,2 700 MTB *J# ,5 1,2 2,2 700 MTB *J# , , MTB *E# , , MTB *E# , , MTB *E# , , MTB *E# , , MTB *E# , ,5 22,5 0, MTB *G# ,68 7,5 13, , MTB *E# , ,5 22,5 0, MTB *G# ,5 14, , MTB *E# ,5 22,5 0, MTB *G# , , MTB *E# , ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 26,5 22,5 0, MTB *G# , ,5 0, MTB *H# Ed. 04 Rev
4 ICEL CODE , ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 0, MTB *H# , ,5 0, MTB *H# ,5 0, MTB *H# ,5 37,5 0, MTB *J# ,5 0, MTB *H# ,5 37,5 0, MTB *J# ,5 37, MTB *J# ,5 37, MTB *J# ,5 37,5 1, MTB *J# ,5 1, MTB *J# , , MTB *E# , , MTB *E# , , MTB *E# , , MTB *E# , , MTB *E# , ,5 22,5 0, MTB *G# ,33 7,5 13, , MTB *E# , ,5 22,5 0, MTB *G# ,47 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , ,5 22,5 0, MTB *G# , ,5 0,8 8, MTB *H# ,5 26,5 22,5 0, MTB *G# ,5 0,8 8, MTB *H# , ,5 22,5 0, MTB *G# , ,5 0,8 8, MTB *H# , ,5 0,8 8, MTB *H# , ,5 0,8 8, MTB *H# , ,5 0,8 8, MTB *H# , ,5 0,8 8, MTB *H# , ,5 37,5 0,8 6, MTB *J# ,5 37,5 1 6, MTB *J# ,5 37,5 1 6, MTB *J# ,5 37,5 1,2 6, MTB *J# ,5 1,2 6, MTB *J# , , MTB *E# , , MTB *E# , , MTB *E# ,1 7,5 13, , MTB *E# , ,5 22,5 0, MTB *G# ,15 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , ,5 22,5 0, MTB *G# , ,5 26,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 0, MTB *H# , ,5 0, MTB *H# ,5 0, MTB *H# , ,5 0, MTB *H# Ed. 04 Rev
5 ICEL CODE , ,5 0, MTB *H# , ,5 37,5 0, MTB *J# , ,5 37, MTB *J# , ,5 37, MTB *J# , ,5 37,5 1, MTB *J# ,5 1, MTB *J# , , MTB *E# , , MTB *E# ,047 7,5 13, , MTB *E# ,068 8,5 14, , MTB *E# , ,5 22,5 0, MTB *G# , , MTB *E# , ,5 22,5 0, MTB *G# ,15 8, ,5 22,5 0, MTB *G# , ,5 22,5 0, MTB *G# , ,5 0, MTB *H# , ,5 0, MTB *H# , , ,5 0, MTB *H# , ,5 0, MTB *H# ,5 0, MTB *H# ,5 37,5 0, MTB *J# , ,5 37, MTB *J# , ,5 37, MTB *J# , ,5 37,5 1, MTB *J# , ,5 1, MTB *J# Ed. 04 Rev
6 Permissible AC voltage versus frequency (sinusoidal waveform) for T=+10 C Referred to the largest pitch execution among available ones Warning: this specification must be completed with the data given in the General technical information chapter Ed. 04 Rev
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev
Main applications Snubber, energy conversion and control in power semiconductor circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and medium-high pulse
MAB - (Updated approval references)
Main applications Motor run capacitor, general purpose AC applications, medium-low power switching capacitor for industrial and motor speed controls, electronic ballasts and SMPS Dielectric Polypropylene
THZ NEW - In Progress
Main applications AC power applications, input-output AC filtering, harsh environment applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case
Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
PSB / RSB - (Expanded range)
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, resonant circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and
MHBS (MHB version S) NEW in progress
Main applications Switching capacitor for industrial and motor speed controls, DClink, SMPS, induction heaters, suitable for AC applications Main characteristics High voltage and high capacitance in small
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Temperature= +40±2 C Capacitance change ±3%
MS - (Expanded range; new lugs) MKP - Switching - igh current - DC-ink - AC Main applications DC-ink, switching capacitor for industrial and motor speed controls, SMPS, solar inverters, power converters
Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32591... B32594 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto
Energy sector DC LINK CAPACITORS AND SNUBBERS
Energy sector DC LINK CAPACITORS AND SNUBBERS DC link APPLICATIONS Hybrid vehicles Wind plants Solar power plants Electric energy generation from sea waves Medical equipment Industrial equipment Car electronics
Metallized Polypropylene Film Capacitors (MKP)
Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: Date: July 2015 B32656S... B32658S EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures
Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004
Film Capacitors Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32537 Date: August 2004 EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications
Metallized Polypropylene Film Capacitor - Box type Features Metallized polypropylene structure Low loss at high frequency Small inherent temperature rise Plastic case (UL94 V-0), Epoxy resin sealing RoHS
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6
Metallized polycarbonate CECC approval, detail specification 30501-020 According to CECC 30500, IEC 384-6 TYPICAL APPLICATIONS Automotive and other applications in high ambient temperatures. Stable filters,
CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise
CAPACITOR CATALOG SPE GROUP Capacitor & Diode ISO Professional Manufacturer To Support the success of enterprise To Support a successful enterprise SUNTAP ELECTRONICS GROUP CO.,LTD. Tel: +86 020 84122024
High Security Capacitors with controllable metallized frame layers
Replacement for CKM 501-4 BG series Applications Railway Signal Systems High Reliability Circuits Main Characteristics High Reliability Controllable Metallized frame layers Compliant to standards NF F
Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.
Metallized Polyester Film s (Radial Dipped) Configuration FEATURES Self healing characteristics. Miniature size, light in weight. High stability of temperature vs. Cap. and tanδ. High density thermosetting
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G capacitor is a polypropylene metallized film capacitor with a polyester tape wrapping filled with resin, and uses tinned
Common to almost all eco-friendly lighting.
A series on topics of relevance and advances from the Technical Centre, Deki Electronics Ltd, India February 2012 Common to almost all eco-friendly lighting. RoHS compliant film capacitors from Deki. www.dekielectronics.com
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
100V 160V 200V 250V 400V
CL12 Polyester Film Capacitors Structures: Polypropylene film, non- inductive, phenolic resin coating Features: Excellent frequency and temperature characteristics, Very small loss even at high frequency.
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
Applications R71 M F 2100 AA 00 J
Polypropylene Pulse/High Frequency Capacitors R71 Single Metallized Polypropylene Film, Radial, SMPS PFC Applications Overview The R71 is constructed of metallized polypropylene film with radial leads
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled with resin and tinned copper wires. Typical
Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC
WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R76 Series is constructed of polypropylene
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
1.0 Rated Values and Operational Data
Applications Protection and Commutation Power Electronics Impulsional devices with intensive / High Current Switching Power Supplies Main Characteristics Dry film-foil technology Nominal Voltage: 630 VDC
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
Snubber, High Current DC, and Switching Capacitors
GTC 005 2011 Snubber, High Current DC, and Switching Capacitors Genteq Capacitors 1946 West Cook Road, Fort Wayne, Indiana 46818 USA Phone: (260) 416-5400 Fax: (260) 416-5460 Email: capacitors@regalbeloit.com
Metallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F611 & F612 Series Metallized Polyester Film, 5 37.5 mm Lead Spacing, 50 1,000 VDC Overview The F611 and F612 Series is constructed of metallized winded
Applications R47 5 I M
R47 Series, Class X2, 520 VAC, 85ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the
SPECIFICATION FOR APPROVAL
RoHS ompliant SPEIFIATION FOR APPROVAL Product Name Product Type Uncoated Metallized Polyester Film apacitor(stacked version) 25(L25 Series) Product ode ustomer ustomer ode Issue Date 216-9 Xiamen Faratronic
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Metallized Polypropylene Film Capacitor DC-Link capacitor
Metallized Polypropylene Film Capacitor DC-Link capacitor APPLICATIONS Industrial and high-end power supplies High performance DC filtering Frequency converters Solar inverters Renewable energies inverters
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
Plastic Film Capacitors
Film Capacitor for AC Motor Type : PMF Series Features High safety (safety function installed) High reliability, safety standard approval Small size, lightness, and low loss RoHS directive compliant Recommended
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
KEMET Part Number: C276CC35250AA1J
KEMET Part Number: C276CC35250AA1J Film, Film/Foil Polypropylene, Motor Run, C276, 25 uf, 5%, 470 V D Threaded Mounting Stud M8 x 10 Double Fast-On L 2 13.5±0.5 5.5 6.3 x 0.8 13.4±0.5 10±0.5 General Information
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)
F5A Series Metallized Polyester Film with Integrated Ceramic Varistor, 18 63 VDC Overview The F5A Series is a metallized polyester (MKT) film capacitor with integrated ceramic varistor encapsulated in
Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.
General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, 50 630 VDC Overview Dual in-line (DIL) metallized polyester (PET) film capacitor. Encapsulation
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
www.vishay.com AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES Low loss dielectric Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F11 Product Name Product Type Metallized polypropylene film AC motor capacitor(box-type) () Product Code Customer Customer Code Issue Date
Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation
Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, 250 850 VDC/160 450 VAC Overview Applications The C4G Series is a polypropylene metallized film with polyester tape wrapping filled
Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V
SPC Series Encapsulated Double Metallized, Size 2824 6560, 100 630 VDC Overview Film capacitor for surface mounting. Double sided metallized film as electrode. Plain polyphenylene sulfide (PPS) as dielectric.
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
MKT (Box) PCX MKP (Box) PCMP 389. MMKP (Box) PCMP 384. MMKP (Dipped) PCMP 483. MKP (Dipped) PCMP 489. MKT (Dipped) PCMT 362 PFC Input 30
Film Capacitor Style Type Application Page Polyester Film Capacitors EMI Suppression Film Capacitors Series Impedance Capacitors Polypropylene Film Capacitors PFC Input Capacitors Polyester Polypropylene
Snubber Capacitors. Film Capacitors for. RoHS COMPLIANT. Intelligent Capacitor Solutions
Snubber Capacitors Film Capacitors for IGBT Power Electronics Applications RoHS COMPLIANT Intelligent Capacitor Solutions As a world-class supplier of capacitors for industrial, medical and specialty applications,
Product Data Sheets. C.27/4 Series C.27/6 Series C.27/7 Series
Product Data Sheets C.27/4 Series C.27/6 Series C.27/7 Series 11 C.27/4 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the singlephase electric motor, allowing its starting
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
SPECIFICATION FOR APPROVAL
RoHS ompliant SPEIFIATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-A03 Product Name Product Type: Box-type Metallized Polyester Film apacitor(stacked version) () Product ode ustomer ustomer ode Issue Date
Applications R46 K I M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
EMC- Components. Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology. Data Book Supplement
EMC- Components Feed-Through Capacitors Feed-Through Filters in Solderless MKP Technology Data Book Supplement Vakatseite (( 2 )) Feed- Through Capacitors Feed- Through Filters B85121 B85321 1 General
Applications R46 3 N M. Capacitance Code (pf)
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide
Type BPDS Polypropylene Board Mount DC Link Capacitors PCB Mount Power Film Capacitors
Specifications Capacitance Range Capacitance Tolerance 1μF - 200 μf ±5%(J) ±10%(K) Rated Voltage 450 Vdc - 1800 Vdc @ 85 C, 500 Vdc - 2000 Vdc @ 70 C Maximum Operating Temperature +105 C Upper Temperature
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade) Overview The R75 Series is constructed of metallized
Motor Running & Motor Starting Lamp Power Factor
Motor Running & Motor Starting Lamp Power Factor Capacitors 2 Contents General information on Iskra Capacitors Type Construction of capacitors Page KNM 70xx 80xx 90xx KNM 12xx 22xx 32xx KNM31xx metallized
Applications C87 8 B F AA 4 J
C87, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview C87 is a polypropylene metallized film, with a cylindrical aluminium can-type construction filled with resin. It uses faston,
MMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
Resin-Coated, Radial-Leaded Solid Tantalum Capacitors
FEATURES RoHS Compliant design available Flame retardant encapsulation Very high temperature range Improved humidity class Low leakage current Very high CV product Low failure rate Pb-free Available RoHS*
P-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
Surface-Mounted Ceramic EMI Filter Capacitors
X2Y S Surface-Mounted Ceramic EMI Filter Capacitors Feb, 2008 Rev.14 1 DESCRIPTION Yageo s X2Y series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD
film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.001μF to 10μF Capacitance tolerance ± 10 %, ± 20 % Rated
PLASTIC FILM CAPACITORS
System chart Metallized polyester MDDS,MDD - For general electronic devices - For communication devices - For computer control devices - For power circuits MDDSA Metallized polypropylene MDD-P FMDD-P MMX
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION
Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL
Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS. (at 20 after 5 minutes) Dissipation Factor (tanδ) 420 & 450V 0.20
from KMQ series Endurance with ripple : 2,000 to 3,000 hours at 105 Non solvent resistant type RoHS Compliant LXS P246 KMS P225 Downsized LXQ P249 KMM KMQ P215 SPECIFICATIONS Items Category Temperature
VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors
Automotive, Sulfur Resistant Lead (Pb)-Free Thick Film, Rectangular Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 C W LIMITING ELEMENT VOLTAGE
Radial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
Thank you for visiting our new Consumer/Gaming Capacitance Solution page.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
THIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F09 Product Name Product Type Metallized polypropylene film AC motor capacitor (column, aluminum case, anti-explosion) () Product Code
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, mm Lead Spacing, VDC
General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, 5.0 27.5 mm Lead Spacing, 50 400 VDC Overview The SMR Series is a metallized polyphenylene sulfide