Document: LIT-MAN-UNV-2 Rev A 10/21/15
|
|
- Abigail O’Connor’
- 5 years ago
- Views:
Transcription
1 Document: LIT-MAN-UNV-2 Rev A 10/21/15
2 Limited Warranty This Product is warranted to be free from defects in manufacturing and workmanship and is guaranteed to work for three years or 36,000 miles, or whichever occurs first from the date of manufacture. The elements have a year shelf life. This Limited Warranty covers the repair or replacement of the seat heater components only and does not cover any costs related to or damage resulting from the installation of the seat heater. Seat heaters must only be used in the seat applications for which they were designed, tested and approved by Check Corporation, and failure to properly install the designated seat heated product, or improper installation or misuse of any component, will void this Limited Warranty. Installer shall indemnify and hold Check Corporation harmless from any and all installations contrary to automobile OEM, automobile dealership, and Check Corporation issued instructions. MANUFACTURER S LIMITED REPAIR/REPLACEMENT WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR DUTIES OR WARRANTIES ARISING FROM A COURSE OF DEALING, USAGE OF TRADE OR COMMON LAW. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR PROXIMITE, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR PRODUCTION OR INJURY TO PERSON OR PROPERTY. THE CONSUMER OF THIS PRODUCT SHOULD CONTACT ITS INSTALLATION DEALER FOR ANY WARRANTY CLAIM AND RETURN WARRANTY CARD TO VALIDATE
3 Safety: PLEASE READ BEFORE INSTALLING HEATING ELEMENT ASSEMBLIES! [wear gloves] [wear safety glasses] IF ANY OF THE FOLLOWING SAFETY CONDITIONS CANNOT BE MET, DO NOT ATTEMPT PRODUCT INSTALLATION Circulation and or sensory compromised persons SHALL NOT use this system/product at any time. There is a High Risk of Thermal Burns. Never reinstall a heating element. Once the element has been removed it cannot be reapplied to the foam bun. There is a risk of a thermal event Check Corporation wire heating element assemblies are specific to each seat and are not to be cut. They are designed to fit specific vehicle seats according to the model and production year of the vehicle. Some front passenger seats are outfitted with occupant detection sensors which are not compatible with any after-market seat heater. Consult with Check Corporation to determine the appropriate heating element assembly for each specific vehicle. Heating elements should NEVER be installed onto foam where an occupant detection sensor is visible on the Top surface of the foam, even if the heating element would not touch the sensor. Heating elements are to be placed onto foam bun only. The heating elements may adversely affect or cause the sensors or airbag system to not function correctly, thereby causing severe injury or death. To prevent OVERHEATING AND/OR FIRE follow these instructions carefully: Cushion and back heating elements are wired to operate in series only. Do not change the wiring to power the heating elements in parallel. If the kit has a cushion and back heating element, then both must be used. Never operate cushion or back element separately. Single element heaters are available if needed. Release paper must be completely removed. Failing to completely remove paper is a fire hazard and nullifies and voids warranty.
4 Do not modify this product Do not connect this product to factory seat heater parts Remove paper adhesive liner from the cushion and back heating elements before installing them onto the foam bun. This is mandatory as the heating pattern is maintained by the adhesion of the heating elements to the foam bun of the seat. If the heating elements are not secured they could develop hot spots. The Heating elements must NOT be folded into seat listing channels except where cutouts were designed into the element. Do not fold the heating elements against themselves. CLOTH UPHOLSTERY If your upholstery is thin, and does not have at least 1/4 of foam sewn onto the backside of the upholstery, it is recommended that you apply a 1/4 to 1/2 thick layer of foam or headliner fabric to the entire insert area between the heating element and the upholstery. This will eliminate read-through and make sure the temperature is at an appropriate level. The heating elements must be connected to switched or keyed ignition power only, to prevent battery drain when vehicle is off. Check and determine that the heating elements will fit under the seat trim covers in the desired areas. The listing channels or the hook and loop fastener should line up with the cutouts in the heating elements. This is not important if the heating elements do not cross over a listing channel or hook and loop fastener. See figure 1 BONDED SEATS (UPHOLSTERY GLUED TO FOAM BUN) Never remove the cover of a bonded seat. The cover of a bonded seat cannot be installed again once it has been removed. If installation of a heating element assembly is to be attempted in this kind of seat, cut an opening in the foam bun large enough for the element to fit ½ underneath the cover. A professional should only attempt this, as mistakes often result in the replacement of the seat foam and cover.
5 Product Specifications 12v automotive system ( volts ) Maximum power requirements vary by kit and range between 51W 13.8V) and 70W 13.8V) Temperature range measured at seat surface during normal operation ** Two setting system: High 110 F (+/- 3 F) or 43.3 C Low 101 F (+/- 3 F) or 38.3 C Heating elements meet FMVSS 302 flammability requirements Connectors are indexed to prevent improper mating, including a quick disconnect for the switch New thin element design to reduce read through on thin upholstery on cloth and leather ** Performance varies with seat materials used and the density and amount of sew foam between the heating elements and the surface of the seat.
6 The skills you need: You need to be confident in your ability to: remove an automotive seat and reinstall to specification remove the upholstery and reinstall the upholstery remove and reinstall other trim such as the center console or parts of the instrument panel creating a hole in the trim for placement of the switch work with advanced airbag and occupant detection systems if equipped Automotive electrical experience or a basic understanding of electrical systems and the ability to disassemble and reassemble automotive seating is recommended. Recommended tools: multi-meter (ohm s, volts, continuity) Terminal crimpers Wire strippers Screw driver Wrenches Electrical tape Marker or pencil Drill Wire cutters Torque, socket and Allen wrenches Hog ring pliers Utility knife Needle nose pliers Ratchet Deep socket 1 Uni-bit (step bit) or 13/16 Drill bit This product features: Temperatures 1 temp 2 temp 3 temp Seats 1 seat 2 seats Heating Technology Resistance Wire Available Switch Style Options for this product: Round Rocker
7 Checklists: Universal Wire Product Contents Part Number Heating Element(s) E25004M E25195M E25361M E25092M E25105M E25106M Hardware HPACK-EC26-1 HPACK-EC26-1 HPACK-EC26-1 HPACK-EC26-1 HPACK-EC26-1 HPACK-EC26-1 HPACK-EC26-1 Component Hardware Contents Part Number Quantity Installation Extras (see contents below) HPACK-EC9-PRO 1 Power Harness (12 ) PH-EC26-12FT 1 Electronic Control Module ECMC-DHL Switch Pack Part Numbers Part Number Quantity Round Rocker Latching Switch Pack SWP-EC26-1-RND 1 HPACK-EC9-PRO Installation Extras Sub-component Package Contents Quantity 4 TY-RAP TY-RAP 2 Inline Fuse Holder Amp Fuse 1 Mini Fuse Tap.125 Blade 1 Fast-On Terminal 1 Ring Terminal 1 Self-tapping Ground Screw 1
8 Heating Element Information E25004M E25195M E25361M E25092M E25105M E25106M
9 E25195M Installation Features Heating Element Information The E25195M heating element is made to accommodate several different seat styling layouts. The elements can be installed so that the cut-out is aligned horizontally or vertically. When installing the element vertically, run the wiring harness along the bolster tie-down area or, if the wire lays atop the foam bun and you are concerned about the user feeling the harness, use a razor knife to create a slit in the foam bun and lay the harness into the foam bun. E25195M Horizontal 2.5 Vertical 2.5 Horizontal 2.5 Vertical 2.5
10 Installation 1. Pre-wire all components on your workbench and test with a multi-meter for continuity. Do NOT use a battery charger as a power source. Use a 12V D.C. power source. If there are any problems, see the troubleshooting page. 2. Locate vehicle fuse panel and determine routing of power harness. Each seat heater needs a separate 7.5A inline fuse (included) with a switched ignition 12V power source. 3. Install the ground wire ring terminal, from the power harness, to the fuse box ground screw. Clean terminals and grounding point of paint, grease, and dirt to ensure a good electrical connection. Never drill through the floor. 4. Disconnect and isolate the negative (ground) battery cable 5. Discharge latent electricity - pump the brakes a few times, and wait five minutes for the system to discharge. It is important to do this before disconnecting any airbag connectors. 6. Remove Seat(s) from vehicle. Care should be taken, as the sharp edges of the seat frame will scratch the interior trim. Use duct tape or padding to cover sharp areas before removing seat. 7. Remove the seat covers and verify that the heating elements fit. 8. Determine a location for mounting the switch. Cut a hole according to the dimensions shown in the wiring diagram. Connect switch harness to the back of the switch as shown in the wiring diagram (by wire color). 9. Locate area for heating elements by tracing element outline onto foam bun. Be sure that the cushion element is placed on the cushion bun, and that the back element is placed on the back bun. 10. Remove the adhesive release paper. This paper must be completely removed, as IT WILL BURN.
11 11. Attach the heating elements to the foam bun, [Notice] not the seat cover, by pushing down on the pads causing the adhesive to stick completely to the foam bun. NOTE: Element may be hard to handle if you remove the release paper off all at once. Paper can be peeled away in increments as you apply the element to the foam bun. top. 12. Apply cushion element rear to front and back element bottom to 13. Re-install seat trim covers. Do not install hog rings through the heating element. 14. Install the seat into the vehicle 15. Reconnect airbag connectors 16. Reconnect the ground of the battery 17. Connect the element harnesses to the controller as shown in the wiring diagram. With the universal system, either both elements or just one can be used. 18. Mate all remaining connectors (as shown in the wiring diagram). SECURE THE WIRE WITH THE TIES PROVIDED. CHECK THAT THE RECLINING OF THE SEATS, OR THE MOVEMENT OF THE SEAT FRAME DOES NOT PULL, FRAY, OR CUT THE WIRES 19. TEST SEAT FUNCTIONS; RECLINE, FORWARD, REVERSE, UP, DOWN, ETC. ENSURING THAT NO STRAIN IS PLACED ON ANY OF THE SYSTEM S WIRES. Ensure all of the anchor bolts are tight to the manufacturer s specification. Using the Seat Heater for the First Time (before you deliver to your customer) OPERATION OF THE HEATED SEATS: After turning the system on high setting, you must sit in the seat and should be able to feel heat within 1-5 minutes depending on the thickness of the trim cover material over the element. The thicker the trim cover, the longer it takes to feel the heat.
12 Figure 1: Installing the heating elements The seat heater element adheres 100% to the foam bun following the surface into the listing gaps. If your heating elements have a pre-made hole, align the hole with the tie-down. The listing channels or the hook and loop fastener should line up with the cutouts in the heating elements. Fold the narrow bridges of the element down into the trench as shown in these illustrations. This is the 4 Pin connector at the end of the element harness. Disconnect the wire harness and use a multi-meter to check for continuity. Probe Pin 1 and Pin 2 at 20K Ohms. Normal reading should be 6,500 to 15,000 Ohms. Figure 2: Troubleshooting the heating elements Probe Pin 3 and Pin 4 at 20 Ohms. Normal reading is between 7.0 and 10.0 Ohms.
13 Troubleshooting of the electrical system If the system does not heat up, check the following: To test the unit you must sit in it for at least a 5-minute period in which the heat has time to reach the seat surface. Check the fuse utilized during the installation. Ensure that all connections are properly mated and that the 12V DC and ground wires are properly installed. (See seat heater wiring diagram) A break in the heating element circuit. To check for this, pull on the wires at all connectors to verify they are properly seated in the connector. Also check for continuity at the 4 pin connectors. Use a multi-meter set to ohms. See Figure 2 A low voltage condition on the controller input from the fuse box. To verify the voltage input, use a multi-meter set to volts, across red AND black wires at controller module (it should read 11-15V). If the heating elements, switch, and seat harness test OK, then a power problem exists, check the following: Using a multi-meter or a test light, start at the power connection and trace back through all of the connectors and the switch to determine where the power loss is occurring. Repair as necessary. If the fuse continues to fail, check the following: Each pair of heating elements that are installed in the vehicle must have their own fuse. A poor ground connection. Check connections or try another grounding point. Another possible cause is the fuse used for power is computer controlled (try another fuse location).
14 Using fuse-taps Figure 3: Connecting Power If you are using fuse taps and the 7.5 in-line fuse provided, attach the tap to a switched ingition fuse which is at least 10 Amp or greater from the vehicle fuse box. When connecting the red wire on the power harness and the tap to the fuse holder, connect the tap to the cold side of the fuse Red wire = Cold Side Using Optional Add-A-Fuse Accessory (Purchased Separately) This adaptor is rated to handle up to 10 amps on the accessory fuse. Prong indicated in photo below must go to the DC +12V hot side of the fuse receptacle. In the example photo, the 7.5 amp fuse runs the seat heater accessory; the 10 amp fuse is the original amperage fuse from the fuse box. The 7.5 amp fuse is in line with the red wire for connection to the DC +12V seat heater wire. Photo: Add-A-Fuse with fuses Photo: Add-A-Fuse installed in fuse box To: Seat Heater Factory Fuse + VOLTAGE COLD
15 View other automotive electrical parts made by Heat Your Seat on our website.
Wire Seat Heater Installation Instructions
COPPER Wire Wire Seat Heater Installation Instructions 1-Seat Coverage 2-Temperature Settings Part# HILO-M1xx HILO-M0xx Document: LIT-MAN-HILO-2 Rev G 2/11/15 Check Corporation 1800 Stephenson Highway
Wire Seat Heater Installation Instructions
COPPER Wire Wire Seat Heater Installation Instructions 1-Seat Coverage 2-Temperature Settings Part# HILO-M1xx HILO-M0xx Document: LIT-MAN-HILO-2 Rev D 12/30/13 Check Corporation 1800 Stephenson Highway
TOYOTA CAMRY LE / SE / XLE DUAL SEAT HEATER KIT Section I Pre-Installation Check
Section I Pre-Installation Check Kit Part Number: 250-1897 3 General Applicability Camry LE / SE / XLE 5 4 1 Recommended Sequence of Application Item # Accessory 1 Wiring 2 Elements 3 2 Kit Contents Item
Service Bulletin
Service Bulletin 14-009 February 13, 2014 ATB 50862 (1402) Driver s Seat Heater Shuts Off After Turning On AFFECTED VEHICLES Year Model Trim VIN Range 2011 13 Odyssey EX-L, Touring ALL SYMPTOM The driver
SCION xd INTERIOR LIGHTING UPGRADE Preparation
Preparation Part Number: PTS21-52085 Light Guide Kit Contents Item # Quantity Reqd. Description 1 1 Controller Board, 4 color programmed w/ Bracket 2 1 RGB, LED Engine wire harness 3 2 14mm Light Rod,
Installation Instructions
Installation Instructions AMP RESEARCH Power Step by Bestop Automatic Retracting Running Board Vehicle Application Nissan Titan King Cab 2004 and newer (5 ft.) Part Number: 75106-01 Nissan Titan Crew Cab
RoadComfort TM. Installation Manual Vibration Massage & Heat
RoadComfort TM Vibration Massage & Heat Installation Manual 1-562-447-1780 WWW.RELAXOR.COM Table of Contents I Required tools II System Configuration III Motor Placement Bottom IV Motor Placement Back
TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation
TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield
TOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT219-48111 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Flat 4-pin wire harness 3 5 Plastic tie 4 1 Special plastic tie for stud mount 5 1 Packing 6 2 Bolt
Scion xa SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS31-00051 Kit Contents Item # Quantity Reqd. Description 1 1 Antenna, Interior 2 1 Antenna Tape Pad 3 1 Wire Harness 4 1 Bracket, Floor 5 3 Hardware Bags 6 3 Templates 7 1 SIRIUS
INSTALLATION. led fairing lights for gl
for gl1800 4627 Fits: 01-up GL1800 Parts Included 4 7-Color Lizard Lights 1 7-Color Controller/Switch 1 Hardware Kit including: 4 Replacement Adhesive Pads 4 18 Extensions 1 Double Male Lizard Light Connector
TOYOTA TACOMA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-35052 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 1 T-tap Connectors,
INSTALLATION. Note: Not all of the included parts will be used during this installation. -cont.-
Driving Lights for Road Glide 5007 Fits: 98-up Road Glide PartS Included 1 Right Light Assembly 1 Left Light Assembly 1 Right Mounting Bracket 1 Left Mounting Bracket 1 Hardware Kit Including: 2 Narrow
TOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
ROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8
Installation Instructions P/N: 422128 (R1318-5231LITE) Fastback GT Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active IO Exhaust Installation Instructions P/N: 422128
USB Charge Port Installation Instructions
USB Charge Port Installation Instructions Lifetime Technical Support support@logolites.com 770-476-7322 www.logolites.com Manual 100-0014C Thank you for purchasing a Logo Lites USB Charge Port! USB Charge
TOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
TOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
TOYOTA HIGHLANDER RUNNING BOARD HIGHLANDER HV Preparation
Preparation Part Number: PT738-48080 Kit Contents Item # Quantity Reqd. Description 1 1 Driver Side Running Board 2 1 Passenger Side Running Board 3 4 /Middle Mount Bracket 4 2 Rear Mount Bracket 5 2 Rear
Seat Comfort Systems Ventilation/Heater Installation Instructions
Seat Comfort Systems Ventilation/Heater Installation Instructions KIT P/N: SCS00000C3 IMPORTANT: THE VENTILATION SYSTEM DRAWS AIR FROM THE CABIN AND MUST HAVE OPEN ACCESS THROUGH THE BOTTOM OF THE SEAT
Flexwire Highlights. 1. A Solution to Center Listings and Seat Heater Installations.
Seat Heaters Universal: Dual Temperature Flex-Wire: Twin Comfort Pads Installation instructions for the Flex-Wire seat heating system SH-FW-01 The All New Flex-Wire Seat Heater combines New Multi-Strand
TOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation
Preparation Part Number PTS21-52062-08 NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide
Conflicts: Vehicles with a sunroof
Toyota 4Runner Non/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit -00110-15, Beige 00016-00120; Fit Kit -00120-15, Gray Accessory Code: ED6 Conflicts: Vehicles with a sunroof Kit Contents:
IR Temp Probe. Toyota Sienna Rear Sight. Part Number: Accessory Code:MC1
Toyota Sienna 200 - Rear Sight Part Number: 0006-00085 Accessory Code:MC Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 2 3 4 5 6 7 8 MIRROR/MONITOR REVERSE MINI-CAMERA
TOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
INSTALLATION. DRIVING LIGHTS for FLHT/FLHX/FLHR 5005
DRIVING LIGHTS for FLHT/FLHX/FLHR 5005 PARTS INCLUDED 1 Right Driving Light Assembly 1 Left Driving Light Assembly 1 Right Driving Light Bracket 1 Left Driving Light Bracket 4 Driving Light Bracket Plugs
IT IS IMPORTANT THAT YOU OBTAIN THE CORRECT INFORMATION FOR YOUR VEHICLE, OR DAMAGE TO THE WIRING SYSTEM COULD OCCUR.
Instructions for Universal Harness PRINT THESE INSTUCTIONS Gentex Mirror Installation Instructions Provided by www.rearviewautomirrors.com These instructions have been prepared to provide you with details
TOYOTA Yaris Hatchback EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
INSTALLATION CONSTELLATION DRIVING LIGHTS 5009
INSTALLATION CONSTELLATION DRIVING LIGHTS 5009 PARTS INCLUDED 1 Right Driving Light with Turn Signals 1 Left Driving Light with Turn Signals 1 Installation Component Kit Including: 8 Insulated Male Spades
Jeep Wrangler (TJ)
INSTALLATION GUIDE APPLICATION MODEL YR PART # Bestop PART # Jeep Wrangler (TJ) 2003 2006 10-03315-10 751-01 INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 4 4= Experienced TOOLS REQUIRED Safety goggles
Toyota 4RUNNER With/MR Overhead Video
Toyota 4RUNNER With/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit-00110-14, Beige 00016-00120; Fit Kit-00120-14, Gray Accessory Code: ED7 Conflicts: Vehicles without a sunroof Kit Contents:
Part Number: PT
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
Scion xb EC Rearview Mirror Preparation
Scion xb 2010 - EC Rearview Mirror Preparation Part Number: 00016-09101 Code: CM9 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ Compass and Homelink 2 1 Hardware bag Hardware
SCION xb AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
TOYOTA COROLLA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
TOYOTA TUNDRA TVIP V3 (RS3000) Section I - Installation Preparation
Section I - Installation Preparation Part Number: 0886-34861 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Status Monitor 3 1 Piezo Buzzer 4 1
2015+ S550 MUSTANG Battery Relocation Kit WR-BTRYRELOKIT-LH WR-BTRYRELOKIT-RH
2015+ S550 MUSTANG Battery Relocation Kit WR-BTRYRELOKIT-LH WR-BTRYRELOKIT-RH The Watson Racing Battery Relocation Kit is NOT designed to protect you in the case of an accident, and therefore is INTENDED
SCION tc ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PTS21-21070 Kit Contents Item # Quantity Reqd. Description 1 2 Hardware Kit w/ power harness 2 1 Front Left Illuminated Door Sill Protector 3 1 Front Right Illuminated Door Sill
Remove 4 circled pins. Route wiring along dashed line. Remove the 2 9mm nuts and black retaining plate that secure extractor.
2015 Ford Mustang Turn Signal Hood Kit Parts List: Quantity: Tool List: Bracket & pre-installed lamp 2 Flat head screwdriver Wiring harness 1 Phillips screwdriver PB-3660 Parts Bag 1 Ratchet & Socket set
Installation Instructions Supertop for Truck
Installation Instructions Supertop for Truck Vehicle Application: Toyota Tacoma Double Cab 2005 - Current (5 ft.) Part Number: 76308 US Patent 6827391 www.bestop.com - We re here to help! Visit our web
PLEASE READ THIS INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION
INSTALLATION INSTRUCTIONS PART NUMBER: L0SXC000 DESCRIPTION: 09 ASCENT TRAILER HITCH PLEASE READ THIS INSTRUCTIONS CAREFULLY, BEFORE YOU START INSTALLATION SAFETY PRECAUTION: When installing Trailer Hitch,
Seat Comfort Systems
Seat Comfort Systems Revitalizer Massage Installation Manual SCS6MC Seat Comfort Systems www.seatcomfort.com Important Safety Instructions The Reviltalzer Massage System is a vibration system that has
STāSIS Engineering R8 Brake System
STāSIS Engineering R8 Brake System Brake Kit Installation Instruction Application Guide SE811-B30-91-00 R8 Brake System Special Tools Required Qty Description 1 10 MM Allen Head Socket 1 M10 Triple Square
INSTALLATION GUIDE. AV8900H Dual Multimedia Headrest Replacement System
INSTALLATION GUIDE AV8900H Dual Multimedia Headrest Replacement System NOTICE OF INTENDED INSTALLATION AND USE AV8900H VIDEO PRODUCTS ARE NOT INTENDED FOR VIEWING BY THE DRIVER, AND ARE TO BE INSTALLED
Please note that these instructions apply to the Toyota Towing Wire Harness. The part you re looking for is PT
This download was hosted by LanderFan.com, your source of tips, tricks, hacks, how-to articles, and other newsy tidbits related to the new (2014+) Toyota Highlander.! Please note that these instructions
SCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT
Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface
INSTALLATION CONSTELLATION DRIVING LIGHTS 5009
INSTALLATION CONSTELLATION DRIVING LIGHTS 5009 PARTS INCLUDED 1 Right Driving Light with Turn Signals 1 Left Driving Light with Turn Signals 1 Installation Component Kit Including: 8 Insulated Male Spades
SCION xb EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
TOYOTA RAV TRAILER WIRE HARNESS Preparation
Preparation Part Number: PU322-42013-UW Kit Contents Item # Qty Description 1 1 Trailer Module Harness 2 1 Trailer 4-Flat Harness 3 1 Trailer Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24
SCION xa AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-52040 (Compass) PT374-21050 (Homelink) Kit Contents Item # Quantity Reqd. Description 1a 1 AD Mirror Assembly w/compass & Map Lights (P/N PT374-52040) 1b 1 AD Mirror Assembly
INSTALLATION FORK MOUNTED DRIVING LIGHTS 5008
5008 PARTS INCLUDED 1 Right Fork Mount Assembly 1 Left Fork Mount Assembly 2 H3 Driving Light Assemblies 1 12-Pin Wiring Adapter 1 Hardware Kit for Fork Mount Driving Lights, Including: 6 5/16-18 Nylock
TOYOTA HIGHLANDER 2016 ON BOARD VACUUM CLEANER
2016 Part Numbers: 00016-48017- (01, 02, 04) Accessory Code: SV1000 NOTE: Will not work in Highlander HV Kit Contents Item # Quantity Reqd. Description 1 1 Vacuum Assembly 2 1 Hose Assembly 3 1 Tool Kit
Scion xb EC Rearview Mirror w/ Shift Light Preparation
2008 - Preparation Part Number: 00016-79800 Accessory Code: YM10 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ PRNDL 2 1 Hardware bag 3 1 Installation Manual Hardware Bag Contents
PHASE 3 POWERSPORTS AUDIO KIT RZR POLARIS. pg 2 Disassembly, Wire and Amplifier Plate Installation. pg 9 Glovebox Subwoofer Installation
POLARIS RZR PHASE 3 POWERSPORTS AUDIO KIT pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25 MRB3 and Dash Kit Installation
Hummer H up A Hummer H3T up A
INSTALLATION GUIDE APPLICATION MODEL YR PART # Hummer H3 2006 - up 5116-01A Hummer H3T 2009 - up 5116-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 = Experienced TOOLS REQUIRED Safety goggles Measuring
TOYOTA CAMRY EC REARVIEW MIRROR Preparation
TOYOTA CAMRY 2010 - EC REARVIEW MIRROR Preparation Part Number: 00016-09101 Code: CM9 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ Compass 2 1 Hardware bag Hardware Bag Contents
Scion xd EC Rearview Mirror Preparation
Scion xd 2010 - EC Rearview Mirror Preparation Part Number: 00016-09101 Code: CM9 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ Compass and Homelink 2 1 Hardware bag Hardware Bag
INSTALLATION GUIDE. AMP RESEARCH TECH SUPPORT (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST
INSTALLATION GUIDE APPLICATION MODEL YR PART # HUMMER H2 2003-2009 75107-01A INSTALLATION TIME 3-5 hrs SKILL LEVEL 1 2 3 = Experienced TOOLS REQUIRED Safety goggles Measuring tape Flat blade screwdriver
Conflicts. TOYOTA 4Runner REARSIGHT. Part Number: Code: MC90 KIT CONTENTS ADDITIONAL ITEMS REQUIRED FOR INSTALL RECOMMENDED TOOLS
TOYOTA 4Runner 2010 - REARSIGHT Part Number: 00016-00085 Code: MC90 Conflicts KIT CONTENTS ITEM QTY DESCRIPTION 1 1 MIRROR/MONITOR 2 1 REAR CAMERA ASSEMBLY 3 1 CAMERA EXTENSION HARNESS 4 1 SACK PARTS 5
Model A Turn Signal Kit Installation Guide
Model A Turn Signal Kit Installation Guide Creative Connections, Inc. Consumer Hot Line: 888-471-LOGO 770-476-7322 In Atlanta, GA http://www.logolites.com P/N: 100-005/K 2008 Creative Connections, Inc.
Upper Class Grille Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133
Parts included (1) - Main Full Opening - Polished - Part #54127 OR 1 Bar - Polished - Part #54131 OR 2 Bar - Polished - Part #54133 OR Full Opening - Black - Part #51127 OR 1 Bar - Black - Part #51131
Air Conditioner for M915 A0/A1 Truck
RD-2-4530-0 Air Conditioner for M915 A0/A1 Truck INSTALLATION INSTRUCTIONS Install refrigerant compressor per instructions provided with compressor mount kit. CAUTION: Edges of sheet metal can be sharp!
If technical support is required, please contact Advent Technical Support at
Document 128-9015A Created 12/12/11 Kit Contents: Item # Qty. Component Description 1 2 Headrest Assembly 2 2 Cables # 3 3 1 Power Cord # 9 4 1 FM Antenna 5 1 Control Box 6 2 IR Headphones 7 2 Remote Control
Installation Instructions PowerBoard Automatic Retracting Running Board
Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Dodge Ram 1500 Crew Cab 2009 - Current : 75138-15 Dodge Ram 2500/3500 & HD Crew Cab 2010 - Current : 75138-15
Installation Instructions Supertop for Truck
Installation Instructions Supertop for Truck Vehicle Application: Ford F-150 Regular / Super Cab 2004 2011 (6.5 ft.) Part Number: 76305 US Patent 6827391 www.bestop.com - We re here to help! Visit our
3-5 Hours Professional installation recommended
I N S T A L L A T I O N G U I D E APPLICATION MODEL YR PART # Toyota Tacoma Double Cab 2005 - up 75142-01A Toyota Tacoma Access Cab* 2005 - up 75142-01A * Modification required to running board assembly.
Front Bucket Seat Upholstery
Specter Off-Road, Inc. 21600 Nordhoff St. Chatsworth, CA 91311 USA www.sor.com, (818)882-1238, Fax: (818) 882-7144 sor@sor.com Luxury Seat Upholstery Installation Instructions Front Bucket Seat Upholstery
Ford F-150 Supercrew A (2004 Heritage) Ford F-150 Super Cab A
INSTALLATION GUIDE APPLICATION LENGTH MODEL YR PART # Ford F-150 Supercrew 79 1999-2004 75111-01A (2004 Heritage) Ford F-150 Super Cab 72 1999-2003 75111-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2
Installation Instructions Supertop for Truck
Installation Instructions Supertop for Truck Vehicle Application: Ford F-150 5.5 Ft. Styleside 2004 and newer Part Number: 76309 www.bestop.com - We re here to help! Visit our web site and click on Ask
INSTALLATION GUIDE Car Show Dual DVD Headrest Replacement System
INSTALLATION GUIDE Car Show Dual DVD Headrest Replacement System NOTICE OF INTENDED INSTALLATION AND USE CAR SHOW VIDEO PRODUCTS ARE NOT INTENDED FOR VIEWING BY THE DRIVER, AND ARE TO BE INSTALLED ONLY
TOYOTA TUNDRA TVIP V4 Preparation
Preparation Part Number: PT398-00100 PT398-00100-AA Conflicts Do not install into vehicles without RKE system. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM
Porsche L and 3.6L Unichip PnP Installation Instructions
Porsche 996 3.4L and 3.6L Unichip PnP Installation Instructions and Warranty Information v1.0, 1 June 2007 Tools Required 10mm socket, ¼-inch or 3/8-inch ratchet, 6-inch ratchet extension, and a 10mm combination
Installation Instructions PowerBoard Automatic Retracting Running Board
Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Chevy Silverado/GMC Sierra Extended Cab Diesel 2011 and newer Part Number: 75147-15 Chevy Silverado/GMC Sierra
INSTALLATION GUIDE. APPLICATION MODEL YR PART # Toyota Tundra Double Cab Toyota Tundra CrewMax
INSTALLATION GUIDE APPLICATION MODEL YR PART # Toyota Tundra Double Cab 2007-10-03566-65 Toyota Tundra CrewMax 2007-10-03566-79 INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 = Experienced TOOLS REQUIRED
AC 110V POWER OUTLET INSTALLATION INSTRUCTIONS. Part No. Application 1. PRE INSTALLATION / INSTALLATION OVERVIEW 2. KIT CONTENTS H7110AJ100
Part. Application H70AJ00 LEGACY / OUTBACK 0MY w/ HK audio LEGACY / OUTBACK 0MY w/o HK audio AC 0V POWER OUTLET INSTALLATION INSTRUCTIONS Page. -6,9-5 Page. -4,7-5. PRE INSTALLATION / INSTALLATION OVERVIEW
Installation MKIV Headlight Housings with Fog Lamps (Procedures apply to both MKIV Jetta and Golf)
Page 1 This tutorial is provided as a courtesy by ECS Tuning. Service Procedure Installation Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well
TOYOTA TACOMA XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-35090 Tuner Assembly 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item
Installation Instructions PowerBoard Automatic Retracting Running Board
Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Chevy Silverado/GMC Sierra Extended Cab 2007 and newer (excluding 2011 Diesels) Part Number: 75123-15 Chevy Silverado/GMC
AEROMOTIVE Part # and F-Body Fuel System Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 17101 and 17102 93-97 F-Body Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We
YARIS 4-DOOR 2007 INTERIOR LIGHT UPGRADE
Document # 3999 4/26/06 4-DOOR 2007 INTERIOR LIGHT UPGRADE Preparation Part Number: 00016-52060 Code: IL1 Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide 3 1 Hardware
Installation Instructions. Fog Lights. The lamps get very hot when they have been in use. Do not touch them as they may cause burns.
2100X Installation Instructions Thank you very much for purchasing PIAA product. Please read this entire manual before installation and use of this product. Fog Lights For Installers Please give this Installation
GENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: Accent light Kit APPLICATION: Versa (2012) PART NUMBER: 999F3 AW008 - Universal Accent Lighting Kit. KIT CONTENTS: Item QTY Description
Document: PIO / DIO Rev.A 08/04/08 Toyota Solara Rear Sight RECOMMENDED SEQUENCE OF APPLICATION
Document: 13.15.00 PIO / DIO Rev.A 08/04/08 Toyota 2008 - Rear Sight Part Number: 00016-00040 Code: MC1 Item # Quantity Reqd. Description 1 1 MIRROR/MONITOR 2 1 REVERSE MINI-CAMERA 3 1 EXTENSION HARNESS
Main Harness Quantity: 1
Smart Engine Start INSTALLATION MANUAL Genuine Part # : H001SVA900 Vehicle Model : WRX Kit Contents Service P/N: H001SVA910 Service P/N: H001SVA820 NOT USED NOT USED SES ECU Quantity: 1 Double-sided tape
SCION tc Navigation System Preparation. Part Number: PT
Preparation Part Number: PT611-21111 Kit Contents Item # Quantity Reqd. Description 1 1 Navigation System 2 1 GPS Antenna 3 1 Bluetooth Antenna 4 1 Wire Harness (Reverse / Park Brake) 5 1 RCA Relay Cable
TOYOTA im NAVIGATION UPGRADE Preparation
Preparation Part Number: PT296-00170 PT296-12170 (Extension Module w/ AHA) Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna kit 5 6 Bolt
TECHNICAL INSTRUCTIONS
TECHNICAL INSTRUCTIONS 76-50213-00 Solar Charger Kit This kit provides the necessary parts and instructions to install an optional Battery Solar Charger Kit. The solar panel charging system will help maintain
SCION xb OVERHEAD CONSOLE Preparation. Part Number:
SCION xb 2008 - OVERHEAD CONSOLE Preparation Part Number: 08253-12800 Kit Contents Item # Quantity Reqd. Description 1 1 Overhead Console 2 1 Bracket 3 1 Plastic cover 4 1 Photo Mount Sheet 5 1 Installation
Toyota Prius C 2015 Frameless EC Mirror w/ Compass & HomeLink
Toyota Prius C 2015 Frameless EC Mirror w/ Compass & HomeLink Part Number: 00016-05463 Accessory Code: ME4000 Note: This accessory requires replacement A-Pillar clip 62217-52120 to complete the installation
RZ3-5K Polaris RZR XP 1000 & 900 Kicker 5 Speaker Audio Kit
PO H PWER PO 5 O KIT I E D U A S A TS S I R LA R Z R R O SP pg 2 pg 9 pg 13 pg 25 pg 29 Disassembly, Wire and Amplifier Plate Installation Glovebox Subwoofer Installation Kick Panel Speakers Installation
Installation Instructions PowerBoard Automatic Retracting Running Board
Installation Instructions PowerBoard Automatic Retracting Running Board Vehicle Application Chevy Silverado/GMC Sierra Extended Cab 2007 and newer (excluding 2011 Diesels) Part Number: 75123-15 Chevy Silverado/GMC
PRELIMINARY INSTALLATION INSTRUCTIONS. Remote Engine Starter Attachment Kit P/N 08E92-SNA-100B
INSTALLATION INSTRUCTIONS Accessory Application Publications No. REMOTE ENGINE STARTER SYSTEM 2008 CIVIC 2-DOOR AII 38215 Issue Date OCT 2007 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B
TOYOTA HIGHLANDE R REARSIGHT Part Number: Code: MC90 KIT CONTENTS ADDITIONAL ITEMS REQUIRED FOR INSTALL RECOMMENDED TOOLS
TOYOTA HIGHLANDE R 2009- REARSIGHT Part Number: 00016-00085 Code: MC90 KIT CONTENTS ITEM QTY DESCRIPTION 1 1 MIRROR/MONITOR 2 1 REAR CAMERA ASSEMBLY 3 1 CAMERA EXTENSION HARNESS 4 1 SACK PARTS 5 1 OWNER
INSTALLATION CLAMP-ON FORK MOUNTED DRIVING LIGHTS 5015
CLAMP-ON 5015 PARTS INCLUDED 2 Driving Lights 2 Side Mount Clamps-43mm/49mm 1 Hardware Kit Including: 2 49mm Spacers 4 43mm Spacers 2 Pivot Dome Washers 2 3/8-16 Serrated Hex Nut 1 Wiring Kit for Driving
TORCH Main Grille Main grille INSERT - # / # Chevrolet Silverado
Parts included (1) TORCH Grille - Main (1) 40 LED - Part #6311271 OR Stealth - Part #6311271-BR OR (1) 30 LED - Part #6311281 OR Stealth - Part #6311281-BR Hardware included (1) - Large Bottom Mounting
Conflicts: Vehicles without a sunroof Vehicles with a single sunroof
Toyota Sienna (Dual Sunroof) 2011-10.2 Overhead Video Part Number: 00016-00110 00016-00110-17 Fit Kit 00016-00120 00016-00120-17 Fit Kit Accessory Code: ED5 Conflicts: Vehicles without a sunroof Vehicles
REARSIGHT PART NUMBER: Code: MC1 RECOMMENDED SEQUENCE OF APPLICATION
Document # 3848 REVISION A 1/26/06 2006 TOYOTA TACOMA REARSIGHT PART NUMBER: 00016-00050 Code: MC1 RE V I S I O N A KIT CONTENTS ITEM QTY DESCRIPTION 1 1 MIRROR/MONITOR 2 1 REAR CAMERA ASSEMBLY 3 1 CAMERA
LEXUS RC 350/RC-F ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT944-24150 Kit Contents Item # Quantity Reqd. Description 1 2 Inner LED Scuff 2 2 Outer Scuff 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 15 20
Mustang Shaker
2005-2009 Mustang Shaker CDC #110050 ( 05/ 06) or 0711-7000-01 ( 07/ 09) Component Check List: Quantity/Description Part # CDC Installer 1 - Engine Cover Assembly 114050 1 - Aluminum Shaker Scoop 183020
MODEL NUMBER: MEDIUM DUTY ONBOARD AIR SYSTEM
MODEL NUMBER: 10003 MEDIUM DUTY ONBOARD AIR SYSTEM IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using