Take O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /

Size: px

Start display at page:

Download "Take O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /"

Frank Eric Caldwell
5 years ago
Views:

1 A Take O ff Dimensions Pipe line systems / Pipe connection technology Profipress with SC- Contur 2.8 /

2 A Take Off Dimensions Pipe line systems / Pipe connection technology Profipress with SC-Contur Form stable for the quick an clean installation of cellar, risers an floor pipes for potable water an heating systems. Presse in secons an offering all the benefits of the result. No wele or solere joints, therefore no anger of fire - especially important when performing refurbishment works. Profipress connectors have an SC-Contur - this is a function on the crimp of the press fitting, which visibly ientifies non-presse connections by causing water to leak when the system is being fille. The SC-Contur is certifie an compliant with DVGW specification sheet W 534, pt. 2.4, fittings with force leaks. Comprehensive choice of pipe connectors to suit a range of installation an connection nees. Size of the connectors: 2, 5, 8, 22, 28, 35, 42, 54 an 64.0, 76., 88.9 an 08.0 mm. The Profipress raiator connecting system features a small number of optimally matche system components. For bran name pipes compliant with DIN EN 057, e.g. SANCO, WICU an cuprotherm pipes. Size of the connectors: 0, 2, 4, 5, 8, 22 an 28 mm. The combination of /bronze or / makes it possible to continue performing installations by traitional means. The electro-hyraulic system press fitting tools an the corless system press fitting tools create a permanent, friction-locke connection. Profipress areas of application: Potable water Rain water Heating systems raiator connection Solar installations (flat collectors/vacuum collectors*) Fire fighting lines Sprinkler systems Compresse air Inert gases Coolant pipes District heat supply installations* ow-pressure steam equipment* * in connection with the Viega FKM sealing element Please consult the technical ocumentation for specification of the maximum operating temperatures an pressure levels for each area of application. In aition to house an inustrial technology, Profipress can also be use in inustrial an plant construction. In aition, Profipress offers fittings for inustrial plant construction that meet the emans for connectors that are free of varnish wetting flaws. (Please aress such enquiries to our Attenorn factory) Internet 2

3 Contents Contents of prouct names Profipress-Elbow Profipress X-Elbow Profipress-Elbow Profipress X-Elbow Profipress-Elbow Profipress X-Elbow Profipress-Elbow Profipress X-Elbow Sanpress-Elbow Sanpress-Plug-in elbow Sanpress-Elbow Profipress-Tee Profipress-Reucing Tee Profipress-Tee Sanpress-Tee Profipress X-Tee Profipress-Crossover Profipress-Crossover Sanpress-Tee Sanpress-Tee Profipress X-Tee Sanpress-Aapter Profipress X-Aapter Sanpress X-Aapter Sanpress-Aapter Sanpress-Aapter Sanpress-Plug-in aapter Sanpress-Plug-in aapter Profipress-Sleeve Profipress X-Sleeve Sanpress X-Sleeve Profipress-Sleeve Sanpress-Sliing sleeve Sanpress-Sliing sleeve Profipress X-Sliing sleeve Sanpress X-Sliing sleeve Profipress-Reucer Profipress X-Reucer Sanpress-Aapter Sanfix P-Aapter Sanpress-Aapter Sanpress-Union Sanpress-Union Sanpress-Union Sanpress-Elbow union Sanpress-Union Sanpress-Union Test plug Axial compensator Profipress-En closing piece Profipress-Closing cap Profipress X-Closing cap Sanpress X-Closing cap Sanpress-Flange aapter Profipress X-Flange aapter Sanpress X-Flange aapter Sanpress X-Flange PN Sanpress-Wall plate Sanpress-Wall plate Sanpress-Wall plate Sanpress-Wall bushing Sanpress-Wall bushing Mounting set Sanpress-Mounting unit (long elbows 5 x /2 x 50) Sanpress-Mounting unit (long elbows 5 x /2 x 00) Sanpress-Mounting unit (short elbows 5 x /2 x 50) Sanpress-Mounting unit (short elbows 2 x 3/8 x 20) Sanpress-Mounting unit (short elbows 5 x /2 x 50) Sanpress-Mounting unit (short elbows 2 x 3/8 x 50) Sanpress-Mounting unit (short elbows 5 x /2 x 200) Sanpress-Mounting unit (short elbows 5 x /2 x 00) Sanpress-Floor manifol (B60 x 00 x H50) Sanpress-Crossover tee (B60 x 60 x H50) Sanpress-Crossover fitting Aapter set (/2 x 3/4) Skirting fitting Plug aapter Plug aapter Plug aapter Aapter set (AG 3/4) Valve raiator connection piece (straight-through form 3/4 x 50) Valve raiator connection piece (angle form 3/4 x 50) Valve raiator connection piece (straight through form -pipe / 2-pipe) Valve raiator connection piece (angle form -pipe / 2-pipe) Aapter set (female threa /2) Aapter set (male threa 3/4) Raiator connection piece Raiator connection block Sanpress-Reucer Sanpress-Crossover Sanpress-Crossover Profipress-Crossover Sanpress-Baseboar raiator connection Valve raiator connection set Sanpress-Return pipe union Sanpress-Return pipe union Raiator connection elbow

4 A Contents of Part N page page page page

5 Contents page page , , , , page page

6 A Contents of Part N page page

7 A Profipress 7

8 A Take Off Dimensions Profipress-Elbow 90 moel 246 Optimise structural imensions Profipress X-Elbow 90 moel 246 X Profipress-Elbow 90 moel 246. Optimise structural imensions Profipress X-Elbow 90 moel 246. X

9 A Profipress Profipress-Elbow 45 moel 2426 Optimise structural imensions Profipress X-Elbow 45 moel 2426 X Profipress-Elbow 45 2 moel Optimise structural imensions Profipress X-Elbow 45 2 moel X

10 A Take Off Dimensions 2 R Sanpress-Elbow 90 moel 224 Optimise structural imensions R / / / / / / / / / / Sanpress-Plug-in elbow 90 moel Rp /

11 A Profipress Sanpress-Elbow Rp moel Optimise structural imensions Rp / / / / / / / / / / / / / Profipress-Tee moel

12 A Take Off Dimensions Profipress-Reucing Tee 2 moel

13 A Profipress Profipress-Tee moel Sanpress-Tee moel Profipress X-Tee moel 248 X

14 A Take Off Dimensions Profipress-Crossover moel 2427 H H Profipress-Crossover moel 2428 H H Sanpress-Tee moel 227. R / / / / / / / Sanpress-Tee 2 2 moel Optimise structural imensions Rp / Rp / / / / / / / / / /

15 A Profipress Profipress X-Tee moel X Rp / / / / S R Sanpress-Aapter moel 22 Optimise structural imensions R S S / / / / / / / / / / / / / / / / Profipress X-Aapter moel 24 X R S / / /

16 A Take Off Dimensions Sanpress X-Aapter moel 22 X R / S Rp Sanpress-Aapter moel 222 Rp S / / / / / / / / / / / / / / / / / Sanpress-Aapter Rp H moel Rp H / / /

17 A Profipress S R Sanpress-Plug-in aapter moel 22. R S / / / / / / / / S Rp Sanpress-Plug-in aapter moel 222. Rp S / / / / / / / / / Profipress-Sleeve moel

18 A Take Off Dimensions Profipress X-Sleeve moel 245 X Sanpress X-Sleeve moel 225 X Profipress-Sleeve 2 moel Sanpress-Sliing sleeve moel = Minimum insertion epth

19 A Profipress Sanpress-Sliing sleeve moel = Minimum insertion epth Profipress X-Sliing sleeve moel X 2 = Minimum insertion epth Sanpress X-Sliing sleeve moel X 2 = Minimum insertion epth Profipress-Reucer 2 moel

20 A Take Off Dimensions 2 Profipress X-Reucer moel 245. X Sanpress-Aapter S moel 223 S S Sanfix P-Aapter moel Sanpress-Aapter moel 223 P Sanpress-Union 20 S S2 moel 2260 S S

21 A Profipress Sanpress-Union S S2 moel 2262 Rp S S2 Rp / / / / / / / / / Sanpress-Union S S2 moel 2265 R S S2 R / / / / / / / / / / / Sanpress-Elbow union 2 2 moel 2255 Rp 2 2 S Rp / / / S / / / /

22 A Take Off Dimensions Sanpress-Union S moel 2263 G G 2 S / / / / / / / / / / / / / / / / / / / Sanpress-Union S moel 2264 G 2 S G / / / / / /

23 A Profipress 4 Test plug brass moel Axial compensator D / stainless steel bellows moel 225 D Altere structural imensions D Profipress-En closing piece moel

24 A Take Off Dimensions Profipress-Closing cap moel Profipress X-Closing cap 2 S Rp moel 2456 X Rp 2 S / / / / / Sanpress X-Closing cap moel 2256 X Rp /

25 A Profipress Sanpress-Flange aapter moel b D 2 k n n = no. of bolt holes in the circle Profipress X-Flange aapter moel X b D 2 k n n = no. of bolt holes in the circle 25

26 A Take Off Dimensions b b2 D k Sanpress X-Flange aapter moel X b b2 D 2 k n n = no. of bolt holes in the circle 2 Sanpress X-Flange PN 6 moel X Rp b D 2 k n / n = no. of bolt holes in the circle 26

27 A Profipress Sanpress-Wall plate moel 2225 Rp / Rp Sanpress-Wall plate moel Rp / / / / / / Optimise structural imensions Rp / / Sanpress-Wall plate moel G /

28 A Take Off Dimensions Rp G Sanpress-Wall bushing moel Rp G /2 3/ /2 3/ /2 3/ /2 3/ R p G Sanpress-Wall bushing moel Rp G /2 3/

29 A Profipress Mounting set moel G3/4 49 Sanpress-Mounting unit (long elbows 5 x /2 x 50) moel /2 Sanpress-Mounting unit (long elbows 5 x /2 x 00) moel ½ Sanpress-Mounting unit (short elbows 5 x /2 x 50) moel ½ 29

30 A Take Off Dimensions Sanpress-Mounting unit (short elbows 2 x 3/8 x 20) moel EX ½ Sanpress-Mounting unit (short elbows 5 x /2 x 50) moel ½ Sanpress-Mounting unit (short elbows 2 x 3/8 x 50) moel Sanpress-Mounting unit (short elbows 5 x /2 x 200) moel ½ 30

31 A Profipress Sanpress-Mounting unit (short elbows 5 x /2 x 00) moel ½ Sanpress-Floor manifol (B60 x 00 x H50) moel H H2 H Sanpress-Crossover tee (B60 x 60 x H50) H 3 moel H H H H H2 H3 H Sanpress-Crossover fitting moel

32 A Take Off Dimensions Aapter set (/2 x 3/4) 2 ½ SW 2 moel ¾ H H 3 H Skirting fitting 3 G D moel D G B B / H H2 H B 2 B 2 Plug aapter moel D Plug aapter moel D Plug aapter D moel D

33 A Profipress Aapter set (AG 3/4) 9 22 moel Valve raiator connection piece (straight-through form 3/4 x 50) 50 Viega ¾ nickel-plate moel ¾ 50 ¾ 43 Viega ¾ Valve raiator connection piece (angle form 3/4 x 50) nickel-plate moel ¾ ¾ Valve raiator connection piece (straight through form -pipe / 2-pipe) nickel-plate moel ¾ 50 ¾ 33

34 A Take Off Dimensions 43 3 /4 Valve raiator connection piece (angle form -pipe / 2-pipe) nickel-plate moel /4 26 Aapter set (female threa /2) ½ moel ¾ Aapter set (male threa 3/4) ¾ ¾ moel

35 A Profipress Raiator connection piece nickel-plate moel ¾ Raiator connection block stainless steel moel B B2 H H2 H3 H Sanpress-Reucer moel Sanpress-Crossover moel H H 35

36 A Take Off Dimensions 2 Sanpress-Crossover 24 moel Profipress-Crossover moel 2427 H H Sanpress-Baseboar raiator connection, nickel-plate moel G B B2 H H2 H / /

37 A Profipress Valve raiator connection set 20 nickel-plate moel Sanpress-Return pipe union ½, nickel-plate moel Sanpress-Return pipe union, nickel-plate moel ½ Raiator connection elbow stainless steel moel

Piping technology copper/gunmetal

model no. page model no. page model no. page model no. page model no. page Profipress with SC-Contur Piping technology copper/gunmetal 1 ZM_A1_int_en_20170203_083425_5.pdf 1 03.02.2017 10:24:38 Press connector