General Catalogue. Fluid materials. Experts in Finishing and Dispensing Solutions V. 01

Transcription

1 General Catalogue Fluid materials Experts in Finishing and Dispensing Solutions V. 01

2

3 EDITORIAL Over the past 85 years, Kremlin Rexson have been working in the Those equipment are designed with two objectives : to continuously innovate and adapt to all new coatings arriving on the market (water-based, high solids, new generation adhesives ) to reduce operating costs by minimizing maintenance. All our equipment are compliant with existing regulations and their performances help reduce VOC (Volatil Organic Compounds). This general guide will let you discover our full range of equipment for liquid materials and help you to select the best possible equipment for your particular application. For additional infomation, please consult our website Airspray spraying accessories Hot spraying valves AIRMIX spraying AIRMIX AIRMIX AIRMIX Hot spraying AIRMIX valves AIRLESS spraying AIRLESS AIRLESS AIRLESS Filtration Agitators AIRLESS hoses Filtration Agitators Mechanical mixing Electronic mixing Air treatment AIRMIX Filtration Agitators AIRMIX hoses

4 FURNITURE Single or bi-component electrostatic applications Elements single or bi-component bonding sprayed or extruded. All manual or automatic process furniture finish: varnishes, lacquers, waxes, stains Single or bi-component electrostatic applications Elements single or bi-component sprayed or extruded bonding. Moving parts lubricating WINDOWS AND DOORS All process finishing: varnishes, lacquers, waxes, single or bi-component stains. Elements single or bi-component sprayed or extruded bonding. Single, bi or tri-components, electrostatic applications. Structural finishing and solutions. Composites structural sealing and bonding. Component protection and finishing. Non destructive testing. Single or bi-component sealing, protection and finishing of agricultural machinery, railways, buses, building equipment. Structural single and bi-component bonding (sandwich panels, windscreens, body...). Manual or automatic single or bi-component cycles and motorcycles finishing. Conventional and electrostatic applications. Moving parts lubricating. Finishing, bonding and lubrication of appliances: washing machines, stoves, refrigerators. Medium or high pressure single or bi-component application for building components such as steel frames, cranes. 2

5 Single or bi-component machine tools and component protection et finishing. Manual, automatic and electrostatic applications. Infusion, bonding, protection and finishing of wind turbines and solar panels. Single or bi-component paints, gel-coats, resins and adhesives applications. Moving parts lubricating. Complete solutions for paint application on plastics. Electrostatic paints robotic line integration. Single or bi-component application, electrostatic applications. Paint distribution. Moving parts lubricating. Complete solutions for paint and soft touch application on plastics. Electrostatic paints robotic line integration. Single or bi-component application, electrostatic applications. Single or bi-component electrical or electronic component finishing. Manual or automatic electrostatic applications. LEATHER Manual or automatic stains and varnishes applications. Manual and automatic leather and foam bonding. Decoration and finishing of flagrance bottles, decorative elements. Manual or automatic applications. Finishing protection et reconditioning of drums and containers, gas bottles,... : solvent or water-based manual or automatic applications. Manual, automatic or electrostatic applications. All KREMLIN REXSON equipment to be used in potentially explosive atmospheres are compliant with 94/9/CE Directive ATEX 94/9/CE Directive (For manufacturers) : This directive defines essential requirements for security: take into account security against explosion during design, display the CE marking, establish a CE conformity declaration, supply an instruction manual. 3

6 PAINTS Decoration and protection are often two associated functions. To achieve these aims, and to re- nickel or chrome plating etc.). Paint is also perfect for both of these functions. In addition, paint is universally used, and can be applied on any surface, such as wood, metal, stone, leather, plastic and will depend on all its stages of preparation, which we will call the Painting System. In general, the stages are as follows: Surface preparation Application of the coating (paints, stains, varnishes, etc...) Drying. 4

7 There is a wide range of physical and chemical treatments to which the surface to be coated can be subjected, before receiving the first coat. Good surface preparation is the essential base for long-lasting protection and a good visual finish on any material. The surface preparation is often the longest, and therefore the most important task involved in coating a part. Material Physical Preparation Chemical preparation Steel stripping, shotblasting, brushing acid Aluminum brushing vapor blast Wood sanding Plastic heating plasma torch, acid particulate or non-adherent substances oil, grease and moisture a wash primer or an anti-corrosion paint A wash primer is a liquid product of around 16s Zahn#2, which should be sprayed in a thin coat, to get into all the imperfections in the surface of the metal. The phosphoric acid which it contains attacks the surface of the metal and forms an isolating and impenetrable layer of phosphate. The wash primer is highly valued for its adhesion to the metal. Importantly, it should then be coated with a layer of paint, which plays the role of a protective shield. An anti-corrosion paint is a product which should be sprayed in a thicker layer than the wash primers. Containing anti-corrosive elements, it has the advantage of protecting the metal both physically and chemically at the same time. Also, it saves time, as a single coat applies both the anticorrosive chemicals and the protective shield to the metal. 4 4 These paints are used very frequently on metal framework, as the coating can be left as it is, or covered subsequently with the desired paint finish. 5

8 PAINTS Looking at a painted object will tell us that paint is hard. However, the paint which we spray is a liquid. This transformation is due in the main part to several components of paint whose functions are described below. Paint contains one or more substances which are generally dissolved in a solvent (or in water) and which regain their solid consistency after drying on the surface. Binders Pigments Fillers. The binder is generally a more or less transparent body which resembles a resin. Dissolved on its own in a solvent it produces a lacquer : Liquid paint Surface to paint Paint often bears the name of the type of solvent on which it is based (cellulose paint is based on a cellulose solvent). powders, which we call pigments. : Evaporated solvent Dry layer Dry extract Sticky film : we say that a film is sticky when we put a finger on it and it feels like adhesive tape Dust-free film : we say that the film is dust-free, when any dust which lands on iot can be removed by blowing Film that is dry to the touch : we say that the film is dry to the touch when a finger does not leave a mark on the surface. Finger-nail hard : we say that the film is finger-nail hard when we cannot mark it. In this state, it can be polished or sanded. 6

9 Finally, to give the finish specific characteristics, we use a whole range of fillers and additives. Solvents make it possible to dissolve the other components of the paint, and can be classed into the following three groups: fast solvents : they evaporate extremely quickly, to such an extent that the paint can dry too quickly, not allowing it enough time to adhere correctly to the surface. These solvents are never used on their own. Slow solvents: they evaporate very slowly, allowing the paint to adhere properly. They leave a soft and smooth finish. Slow solvents are not very widely used because they significantly increase the drying time. Medium solvents: they evaporate in a few seconds; this is enough to ensure good adhesion, while giving a satisfactory drying time. In order to make the correct paint, the manufacturer first of all makes a list of the solvents capable of dissolving all the binders he wishes to include, and then chooses those with a volatility suitable for the planned method of drying(whether at room-temperature or in an oven). Before application, paint is often reduced to give a consistency which is ideal for the task. Viscosity The consistency of the paint should be adapted for the type of application. It is identified by the extent of its viscosity, which is expressed in centipoises or by measuring the time in seconds that it takes for a certain amount of paint to run through a calibrated viscosity cup. There are different viscosity cups used for measuring the viscosity of paints. The table below shows the relationship between cup size sand viscosities in Centipoises. AFNOR 4 (CA4) ISO 4 mpas.s Centipoises Ford 4 (CF4) DIN 4 (D ) CH (Fr) ZAHN (n se = 100 centipoises et 1 mpas.s = 1 centipoise 7

10 Viscosity of paint changes with variations in temperature; basically, the resins are far more fluid when they are hot. The table below shows the changes in viscosity of a glycerophthalic paint as the temperature varies. It is worth noting that a paint which has a viscosity of 22s at 68 F will have a viscosity of 28s at 54 F and of 17s at 90 F. Temperature ( C) Viscosities in secondes CF Example : at a temperature de 20 C for an announced viscosity of 22 s, you should be ready for the following results: at 12 C, a viscosity of 28 s, at 32 C, a viscosity of 17 s. 8

11 Quality problems tend to arise when the temperature of the paint changes during the course of the day. For example: During the course of this day, the viscosity of the paint has moved from 23 to 17 seconds, which leads to a 22% increase in the output of the spray guns,leading to overcoloring and excessive product consumption. Temperature ( C) Viscosity - CA4 (s) Spray gun output (cm3/mm) morning, cool workshops Worse still, paint prepared in a hot workshop at 20 seconds can be at 28 seconds the following morning, before the workshop has got up to full working temperature: this would lead to a less fine spray and a much greater drying time. Dry extracts VOC (Volatile organic compounds), or water in case of wtare-based paints Drying paint is all about allowing the volatile products to evaporate and the film to harden. We must distinguish between hardening and drying. Drying gives us the dry film purely by the evaporation of the volatile products. This happens at two stages: during spraying and within the film. Depending on the temperature, the density of the spray, the type of spray gun and the distance of the spray, the paint can arrive on the surface more or less dry. That means that the majority of the solvent has evaporated before the paint reaches the surface. The drying of the wet film is accelerated when the surface is in a well-ventilated area which has dry air and is dust-free. 9

12 HTi (HVLP) 65% 73% HPA (Conventional) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX 72% 80% 86% HPA (Conventional) HTi (HVLP) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX AVERAGE OUTPUT HTi (HVLP) HPA (Conventional) KREMLIN REXSON AIRLESS Other mixed systems KREMLIN REXSON AIRMIX 10 HPA (Conventional) HTi (HVLP) KREMLIN REXSON AIRMIX 3 à 5 m3 25 m3 30 m3

13 SPRAYING Type of part Fluids Type Viscosity (CA4/cps) Example 2 components 15 to 90 (jusqu à 300) motor oil Thick solvent - (300 to ) liquid honey Solvent 45 to 90 (120 to 300) Primer, glaze thick motor oil 30 to 45 (60 to 120) motor oil Varnish, glaze 20 to 30 (40 to 60) cooking oil Stains, 15 to 20 - water M22 G HTi S3 Less than 5 HTI All sorts of parts, shapes and type of wood PU 2125 F or Cyclomix or PU M22 P HTi M22 G HPA M22 HPA GSP Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HTi M22G HPA M21G Basic LP S3 More than 5 Less than 5 HPA PU 2125 F or PU 3000 or CYCLOMIX + M22 HTi Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 HPA More than 5 AIRMIX parts : furniture, doors, kitchen units, stairs, packaging materials, etc for all types of wooden materials... PU 2160 or PU 3000 or CYCLOMIX + Xcite PU 3000 or CYCLOMIX + Xcite 20.25, or 17A, 20.25F, 20.50F pumps + Xcite Pump EOS15-C25 or 30-C25 + Xcite 5 to 15 More than 15 AIRLESS Generally plain, large surface area parts - doors, CYCLOMIX or PU M 250 Pompe EOS 30-C25, 40.25, or 34A, 40.25F, 40.50F + M 250 More than 15 ELECTRO* Complex parts: hollow parts, lifelines, seats, cluster, etc. PU 2125F or PU 2160 or CYCLOMIX or PU KMV3*, KMP3* KMX3*, KMC3* Spraymium* KMV3*, KMP3* KMX3*, KMC3* Spraymium* + pumps More than 10 * For conductive products, see electrostatic chapter 1- the type of part you are coating 3- the product you apply and its viscosity 11

14 SPRAYING Type of part Fluids Type Viscosity (CA4/cps) Example 2 components 15 to 90 (jusqu à 300) - (300 to ) Solvent- 45 to 90 (120 to 300) Primers, coatings 20 to 45 (40 to 60) Sealers 15 to 20 - motor oil liquid honey thick motor oil cooking oil water M22 G HTi M22 G HTi Less than 5 HTI All sorts of parts, shapes and type of metal PU 2125 F + M22 P HTi PU 3000 or Cyclomix + M22P HTi M22 G HPA M22 G HPA GSP Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HTi S3 5 to 10 More than 10 Less than 5 HPA PU 2125 F + M22 P HPA PU 3000 or Cyclomix + M22 P HPA Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HPA 5 to 10 More than 10 AIRMIX plain parts : cabinets, agricultural machinery, machine tools, rolling equipment, moulded parts, panels... PU 2160 or PU 3000 or CYCLOMIX + Xcite PU 3000 or CYCLOMIX + Xcite EOS15-C25 or 30-C25 pump + Xcite 20.25, ou 17A, 20.25F, 20.50F pumps + Xcite 5 to 15 More than 15 AIRLESS with a large surface area: building, railways, frames,... CYCLOMIX or PU M 250 EOS 30-C25, 40.25, or 34A, 40.25F, 40.50F pumps + M 250 More than 10 ELECTRO* Parts with tubular section - seats, cycles and motorcycles, aeronautics... CYCLOMIX or PU KMV3*, KMP3* KMX3*, KMC3* Spraymium* KMV3*, KMP3* KMX3*, KMC3* Spraymium* + pump more than 10 * For conductive products, see electrostatic chapter 1- the type of part you are coating 3- the product you apply and its viscosity 12

15 SPRAYING Type of part Fluids Type Viscosity (CA4/cps) Example 2 components 15 to 45 (jusqu à 120) 45 to 90 (120 à 300) Primer 30 to 45 (30 à 120) varnishes 15 to 30 - motor oil thick motor oil cooking oil water M22 G HTi or S3 Less than 5 HPA PU 2125F or CYCLOMIX + M22 P HTi Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HTi More than 5 HTI Television, Hi-Fi, computer cases, household appliances, houseand garden furniture, dash boards, bumpers, steering wheels, wing mirror,. PU 2125F or PU 3000 or CYCLOMIX + M22 P HTi M22 G GSP HPA M22 G HPA M22 G HPA S3 Pressure pot 5,10, 30 litres or PMP pump 150 mobile/wall-mounted or M22 P HPA Less than 5 More than 5 ELECTRO* CYCLOMIX PU KMV3* KMP3* Spraymium* KMV3*, KMP3* Spraymium* + pump More than 10 * For conductive products, see electrostatic chapter 1- the type of part you are coating 3- the product you apply and its viscosity 13

16 14 NOTES

17 AIRSPRAY SPRAYING

18 M22 G HTI M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components Choice of two 0.6 l cups available BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Polyacetal white cup for water and solvent-based materials PEHD grey cup for pre-catalysed or PU materials SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 FITTINGS Varnishes, lacquers, stains, polyurethans, two component Anodized Forged Aluminum Recommended atomization air pressure (bar) EP5: 2-3 E5 K HVLP: Air consumption (m 3 /h) Weight (with cup) (g) 680 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts EP5: 20.2 à 2.5 bar E5 K HVLP: 27.2 à 2 bar Stainless steel Stainless steel Stainless steel Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP E5 K HVLP CONFIGURATION OF THE M22 G HTI WITH E5 KHVLP AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Polyacetal 0.6L (White) PEHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PEHD 0.6L (Grey) < 20 s 13 E5 K HVLP Polyacetal 0.6L (White) PEHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PEHD 0.6L (Grey) s 15 E5 K HVLP Polyacetal 0.6L (White) PEHD 0.6L (Grey) E5 K HVLP Polyacetal 0.6L (White) PEHD 0.6L (Grey) > 40s Polyacetal 0.6L (White) E5 K HVLP > 40 s PEHD 0.6L (Grey)

19 M22 G HTI PROJECTORS FOR GRAVITY M22 G HTI E5 KHVLP Max Fluid viscosity in CA 4 Nozzles Fluid Fan width Projector Air consumption output at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type M22 SPRAY GUNS Nozzle Aircap Needle Airspray spraying technologies E5 KHVLP < 20 s E5 KHVLP E5 KHVLP E5 KHVLP s E5 KHVLP > 40 s E5 KHVLP (1) AIRMIX AIRCAP EP5 CONFIGURATION OF THE M22 G HTI WITH EP 5 AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup AIRLESS Polyacetal 0.6L (White) PEHD 0.6L (Grey) EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) < 20 s 13 EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) s 15 EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) > 40 s 22 EP Polyacetal 0.6L (White) PEHD 0.6L (Grey) Electrostatic spraying and equipment PROJECTORS FOR GRAVITY M22 G HTI EP5 Max Fluid viscosity in CA 4 MAINTENANCE KITS Seal kit Repair kit (includes the seal kit) Nozzles Fluid Fan width Projector Air consumption output at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type Nozzle Aircap Needle EP < 20 s EP EP EP s EP > 40 s EP (1) Plural component pumps and machines Fittings and air treatment 17

20 M22 G HPA M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components Choice of two 0.6 l cups available BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance Polyacetal white cup for water and solvent-based materials PEHD grey cup for pre-catalysed or PU materials SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 2-4 Air consumption (m 3 /h) 26.5 Weight (with cup) (g) 680 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts Varnishes, lacquers, stains, polyurethans, two-component Anodized Forged Aluminum Stainless steel Stainless steel Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP EN 5 CONFIGURATION OF THE M22 G HPA GRAVITY Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Polyacetal 0.6L (White) PEHD 0.6L (Grey) EN Polyacetal 0.6L (White) PEHD 0.6L (Grey) < 20 s 13 EN Polyacetal 0.6L (White) PEHD 0.6L (Grey) EN Polyacetal 0.6L (White) PEHD 0.6L (Grey) s 15 EN Polyacetal 0.6L (White) PEHD 0.6L (Grey) EN Polyacetal 0.6L (White) PEHD 0.6L (Grey) > 40 s 22 EN Polyacetal 0.6L (White) PEHD 0.6L (Grey)

21 M22 G HPA PROJECTORS FOR M22 G HPA SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fluid output Fan width Projector consumption M22 G at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type M22 SPRAY GUNS Nozzle Aircap Needle Airspray spraying technologies < 20 s EN < 20 s EN < 20 s EN s EN s EN > 40 s EN (1) AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines SEAL KITS Seal kit Repair kit (includes the seal kit) AIRLESS Needle with polyacetal end for M22G NEEDLE WITH POLYACETAL END FOR M22 G HTI AND HPA (OPTIONAL) Nozzles Size (mm) Needle with polyacetal end Needle with polyacetal end

22 M22 G BASIK HPA M22 SPRAY GUNS FEATURES Polished aluminum body New design of the BA aircap E-Z adjust aircap BENEFITS Easy and quick maintenance Compatible with most material Spraying quality guaranteed 0.6 l polyacetal cup Can be quickly cleaned Allows adjustment without loosening the retaining ring SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 2 Air consumption (m 3 /h) 28 Weight (with cup) (g) Maximum Fluid Temperature ( C) Nozzle Needle Wetted parts Varnishes, lacquers, stains, polyurethans, two-component Polished Forged Aluminum Stainless steel Stainless steel Stainless steel/aluminum FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (gravity cup) - AIRCAP BA5 CONFIGURATION OF THE M22 G BASIK HPA Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Polyacetal 0.6L (white) s 18 BA Polyacetal 0.6L (white) PROJECTORS FOR M22 G BASIK HPA Max Fluid viscosity in CA 4 Nozzles Air Fluid output Projector Fan width at consumption M22 G Size (mm) 20 cm (cm) (m 3 /h) (cc/mn) Type Nozzle Aircap Needle , BA SEAL KITS Seal kit Repair kit (includes the seal kit) 20

23 M22 G HPA GSP M22 SPRAY GUNS Airspray spraying technologies FEATURES New ergonomics and body design Reduced trigger effort during application Unique aircap design E-Z adjust aircap Reduced number of components BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Full security during application: cup pressure will never exceed 0.5 bar Full operator safety Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance AIRMIX SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 FITTINGS Varnishes, lacquers, stains, polyurethans, two component Anodized Forged Aluminum Recommended atomization air pressure (bar) 2-4 Maximum cup air pressure (bar) 0.5 Air consumption (m 3 /h) 26.5 Weight (with cup) (g) 710 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) AIRCAPS EN5 Fluid inlet (gravity cup - under pressure) - CONFIGURATION OF THE M22 G HPA GSP Fluid viscosity Projector type Nozzles Size (mm) Fan width at 20 cm (cm) Cup AIRLESS Electrostatic spraying and equipment < 3000 cps 15 EN PEHD 0.6L (grey) EN PEHD 0.6L (grey) EN PEHD 0.6L (grey) PROJECTORS FOR M22 G HPA GSP SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air consumption Fan width Projector Size (mm) (m 3 /h) at 20 cm (cm) Type Nozzle Aircap Needle Plural component pumps and machines s EN s EN > 40 s EN (1) SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment 21

24 M22 P HTI M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance SPECIFICATIONS Sprayed materials Varnishes, lacquers, stains, polyurethans, two-component Body of the gun Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) E3 K HVLP: (1) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Treated stainless steel Wetted parts Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP E3 K HVLP CONFIGURATION OF THE M22 P HTI WITH E 3 K HVLP AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) E3 K HVLP < 20 s E3 K HVLP s 15 E3 K HVLP E3 K HVLP

25 M22 P HTI PROJECTORS FOR PRESSURE M22 HTI E3 KHVLP Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type M22 SPRAY GUNS Nozzle Aircap Treated needle Airspray spraying technologies < 20 s s E3 KHVLP E3 KHVLP E3 KHVLP E3 KHVLP AIRMIX AIRCAP EP 3 CONFIGURATION OF THE M22 P HTI WITH EP 3 AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) < 20 s s PROJECTORS FOR PRESSURE M22 HTI EP3 Max Fluid viscosity in CA 4 07 EP EP EP EP Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Treated needle AIRLESS Electrostatic spraying and equipment EP < 20 s EP s EP EP SEAL KITS Seal kit Repair kit (includes the seal kit) Plural component pumps and machines M22 P HTI GUN KITS Kit designation Kit part number Fittings and air treatment

26 M22 P HPA M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 1, Air consumption (m 3 /h) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts Varnishes, lacquers, stains, polyurethans, two-component Anodized forged aluminum Stainless steel Treated stainless steel Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP EN 3 CONFIGURATION OF THE M22 P HPA WITH EN3 AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Air consumption (m 3 /h) Fan width at 20 cm (cm) < 20 s 07 EN EN s 15 EN EN

27 M22 P HPA PROJECTORS FOR M22 P HPA SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type M22 SPRAY GUNS Nozzle Aircap Treated needle Airspray spraying technologies < 20 s EN < 20 s < 20 s EN s > 40 s > 5000 cps AIRCAP EG EN EN ER ER ER ER ES (1) ES AIRMIX Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment PROJECTORS FOR M22 P HPA SPRAY GUNS FOR GLUES Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Treated needle > 30s EG > 30s EG AIRLESS SEAL KITS Seal kit Repair kit (includes the seal kit) M22 P HPA GUN KITS Kit designation Kit part number 25

28 M22 P BASIK HPA M22 SPRAY GUNS FEATURES Polished aluminum body E-Z adjust aircap New design of the BA aircap BENEFITS Easy and quick maintenance Compatible with water-based materials Allows adjustment without loosening the retaining ring Spraying quality guaranteed SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 31 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts Varnishes, lacquers, stains, polyurethans, two-component Polished Forged Aluminum Stainless steel Stainless steel Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP BA3 CONFIGURATION OF THE M22 P BASIK HPA Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) < 20 s BA s 15 BA BA PROJECTORS FOR M22 P BASIK HPA Max Fluid viscosity in CA 4 Nozzles Fluid output Fan width Projector Air consumption M22 G at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type Nozzle Aircap Needle <20 s s BA s BA s BA SEAL KITS Seal kit Repair kit (includes the seal kit) 26

29 M22 P WBE HPA M22 SPRAY GUNS Airspray spraying technologies FEATURES Polyurethane needle tip and treated metal needle rod and nozzle SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Inlet air pressure (bar) Air consumption (m 3 /h) Weight (g) 520 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts FITTINGS Fitting Air Inlet M 1/4'' NPS Fluid Inlet BENEFITS Compatible with water-based materials Wear caused by the use of abrasive products is reduced Water-based abrasive coatings, porcelain enamels Polished Forged Aluminum Treated metal Treated metal Stainless steel / Polyurethane M 3/8'' NPS AIRMIX AIRLESS AIRCAP EN3 CONFIGURATION OF THE M22P WBE HPA SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width (cm) < 20s 07 EN EN s 15 EN EN > 40s 23 ER Electrostatic spraying and equipment PROJECTORS FOR M22 WBE HPA SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Fan width Projector Air consumption Fluid output at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type Nozzle Aircap Needle Plural component pumps and machines < 20s EN < 20s < 20s EN s EN s EN > 40s ER SEAL KITS Seal kit Repair kit (includes the seal kit) Needle tip kit for nozzles sized 7 to 23 (x10) Fittings and air treatment 27

30 M22 P HTV M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Compatible with water-based materials Important product savings and environmental protection Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring SPECIFICATIONS Sprayed materials Varnishes / Stains Body of the gun Anodized Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 24 (1) Weight (g) 580 Maximum Fluid Temperature ( C) (2) Nozzle Stainless steel / PEEK Needle Treated stainless steel Wetted parts Stainless steel / PEEK FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 3/8" NPS AIRCAP EV3 K HVLP CONFIGURATION OF THE M22 P HTV GUN WITH EV3 K HVLP AIRCAP Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) 14-20s EV3 K HVLP s EV3 K HVLP s EV3 K HVLP PROJECTORS FOR M22 P HTV SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Size (mm) Fan width at 20 cm (cm) Air consumption (m 3 /h) Fluid output (cc/mn) Nozzle assembly Aircap Treated needle s 18/ s 18/ s 22/ SEAL KITS Seal kit Repair kit (includes the seal kit) 28

31 M22 SPRAY GUNS Special needles and nozzles for M22 P AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies SPECIAL NEEDLES AND NOZZLES FOR M22 P Designation Needle Nozzle 207 T Treated nozzle and needle Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle T Treated nozzle and needle NEEDLE WITH POLYACETAL END FOR M22 P HTI AND HPA (OPTIONAL) Nozzles Size (mm) Polyacetal needle end Polyacetal needle end AIRLESS 29

32 M22 A HPA M22 SPRAY GUNS FEATURES New ergonomics and body design Reduced trigger effort Unique aircap design E-Z adjust aircap Reduced number of components BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Fine control of the needle tightening torque for an improved sealing Allows adjustment without loosening the retaining ring Easy maintenance SPECIFICATIONS Sprayed materials Virtually all coatings Body of the gun Anodised Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 2-3 Air consumption (m 3 /h) Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel/aluminum FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid inlet (SM6 suction cup 1l) M 3/8" NPS AIRCAP EN 2 CONFIGURATION OF THE M22 A HPA Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup < 20 s 12 EN SM6 (1 L) s 15 EN (Aluminum) EN PROJECTORS FOR SUCTION-FED M22 A HPA GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Treated needle < 20 s EN s EN EN > 40 s ER ER SEAL KITS Seal kit Repair kit (includes the seal kit)

33 M22 A BASIK HPA M22 SPRAY GUNS Airspray spraying technologies FEATURES Polished aluminum body E-Z adjust aircap New design of the BA aircap SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 24 Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts BENEFITS Easy and quick maintenance Allows adjustment without loosening the retaining ring Spraying quality guaranteed Virtually all coatings Polished Forged Aluminum Stainless steel Stainless steel Stainless steel, aluminum AIRMIX AIRLESS FITTINGS Fitting Air Inlet M 1/4" NPS (+ M 1/4" BSP) Fluid Inlet M 3/8" NPS AIRCAP BA2 CONFIGURATION OF THE M22 A BASIK HPA Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Electrostatic spraying and equipment SM6 (1L) BA SM6 (1L) s 18 BA SM6 (1L) PROJECTORS FOR M22 A BASIK HPA Max Fluid viscosity in CA 4 Nozzles Air Fluid output Fan width Projector consumption M22 G at 20 cm Size (mm) (m 3 /h) (cc/mn) (cm) Type Nozzle Aircap Needle Plural component pumps and machines BA BA SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment

34 M22 SPRAY GUNS Aircaps for M22 airspray guns AIRCAPS FOR HTI AND HTV AIRSPRAY GUNS E3 K HVLP E5 K HVLP EP 3 EP 5 EV 3 Guns M22 P HTi M22 G HTi M22 P HTI M22 G HTi M22 P HTV Fan shape Flat Flat Flat Flat Flat swirling fan Atomization Type HTI HTi HTi HTi HTi Atomization quality Excellent Excellent Excellent Excellent Excellent Air 2 bar m 3 /h 27.2 m 3 /h 3 /h 20.2 m 3 /h 24 m 3 /h Nozzle size 07/18 12/22 07/18 12/22 04/06 AIRCAPS FOR HPA AIRSPRAY GUNS EN 5 EN 2 EN 3 Guns M22 G HPA M22 A HPA M22 P HPA Fan shape Flat Flat Flat Atomization Type HPA HPA HPA Atomization quality Very Good Very Good Very Good Air 2 bar 26.5 m 3 /h 3 /h m 3 /h Nozzle size 12/22 12/18 07/18 AIRCAPS FOR HPA BASIK AIRSPRAY GUNS BA 5 BA 2 BA 3 Guns M22 G BasiK HPA M22 A BasiK HPA M22 P BasiK HPA Fan shape Flat Flat Flat Atomization Type HPA HPA HPA Atomization quality Good Good Good Air 2 bar 28 m 3 /h 24 m 3 /h 32 m 3 /h Nozzle size 18 15/18 AIRCAPS FOR HPA AIRSPRAY GUNS ER1 ER3 ER4 ER9 ES3 ES9 EG1 Gun designation M22 A HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA M22 P HPA Fan shape Flat Flat Flat Round Flat Round Flat Atomization Type HPA HPA HPA Conventional Conventional Conventional Conventional Atomization quality Very good Very good Very good Excellent Good Very good Excellent Nozzle size 23/27 23/27 23/27 23/27 33/40 33/40 15/18

35 NOTES Airspray spraying technologies Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX

36 S3 G HTI S3 SPRAY GUNS FEATURES New ergonomics and body design Unique aircap design In-line air valve assembly E-Z adjust aircap PEHD cup BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Fine adjustment and long lasting components For an improved application accuracy Allows adjustment without loosening the retaining ring Compatible with water-based materials SPECIFICATIONS Sprayed materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Body of the gun Polished Forged Aluminum Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 7.5 (1) Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Stainless steel Needle Stainless steel Wetted parts Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid inlet (gravity cup) - AIRCAP ESG KHVLP CONFIGURATION OF THE S3 G HTI SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Projector s 08 ESG KHVLP PEHD 0.25L (grey) 14-20s 10 ESG KHVLP s 12 ESG KHVLP PROJECTORS FOR S3 G HTI SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Needle <20 s ESG KHVLP s ESG KHVLP s ESG KHVLP SEAL KITS Seal kit Repair kit (includes the seal kit)

37 S3 G HPA S3 SPRAY GUNS Airspray spraying technologies FEATURES SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 8-10 Weight (with cup) (g) Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts FITTINGS BENEFITS New ergonomics and body design The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Reduced air consumption Energy savings In-line air valve assembly Fine adjustment and long lasting components 2 different projectors: AM and PGL (special line round fan) For an improved application accuracy E-Z adjust aircap Allows adjustment without loosening the retaining ring PEHD cup Compatible with water-based materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Stainless steel Stainless steel Stainless steel Fitting Air Inlet M 1/4" NPS Fluid inlet (gravity cup) - AIRMIX AIRLESS AIRCAP AM PGL CONFIGURATION OF THE S3 G HPA SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Cup Electrostatic spraying and equipment PEHD 0.25L (grey) s 08 AM PeHD 0,25L (grey) s 08 AM Polyacetal 0,25 l (white) s 10 AM PeHD 0,25l (grey) s 12 AM PeHD 0,25l (grey) s 10 PGL PeHD 0,25l (grey) PROJECTORS FOR S3G HPA SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Needle Plural component pumps and machines AM <20 s AM AM s PGL SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment

38 S3 A HPA S3 SPRAY GUNS FEATURES New ergonomics and body design Reduced air consumption In-line air valve assembly E-Z adjust aircap PEHD cup BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Energy savings Fine adjustment and long lasting components Improved comfort for more productivity Allows adjustment without loosening the retaining ring Compatible with water-based materials SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 8-11 Weight (with cup) (g) 6 Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Stainless steel Stainless steel Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid inlet (0.25l PeHD suction cup) M 1/4" NPS AIRCAP AM AY CONFIGURATION OF THE S3 A HPA SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Air consumption (m 3 /h) Fan width at 20 cm (cm) Cup s 08 AM s 10 AM PeHD 0.25l (grey) s 12 AM AY PROJECTORS FOR S3 A HPA AIRSPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Fan width Air Projector Fluid output at 20 cm consumption Size (mm) (cc/mn) (cm) (m 3 /h) Type Nozzle Aircap Needle AM <20 s AM AM s AY SEAL KITS Seal kit Repair kit (includes the seal kit)

39 S3 P HTI S3 SPRAY GUNS Airspray spraying technologies FEATURES New ergonomics and body design Unique aircap design E-Z adjust aircap In-line air valve assembly SPECIFICATIONS Sprayed materials Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Air consumption (m 3 /h) 12 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Allows adjustment without loosening the retaining ring Fine adjustment and long lasting components Improved comfort for more productivity Shades, varnishes, lacquers, stains, polyurethans, 2 component Polished Forged Aluminum Stainless steel Stainless steel Stainless steel AIRMIX AIRLESS FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 1/4" NPS AIRCAP EPX KHVLP CONFIGURATION OF THE S3 P HTI SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) Electrostatic spraying and equipment s 08 EPX KHVLP s 10 EPX KHVLP s 12 EPX KHVLP PROJECTORS FOR S3 P HTI SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Nozzle Aircap Needle Plural component pumps and machines s EPX KHVLP s EPX KHVLP s EPX KHVLP SEAL KITS Seal kit Repair kit (includes the seal kit) Fittings and air treatment

40 S3 P HPA S3 SPRAY GUNS FEATURES New ergonomics and body design Unique aircap design E-Z adjust aircap Reduced air consumption In-line air valve assembly BENEFITS The gun is part of the operator's arm who can focus on the application and the spraying movement for an improved quality Allows adjustment without loosening the retaining ring Energy savings Fine adjustment and long lasting components Improved comfort for more productivity SPECIFICATIONS Sprayed materials Shades, varnishes, lacquers, stains, polyurethans, 2 component Body of the gun Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) 3 Air consumption (m 3 /h) 10 Weight (g) Maximum Fluid Temperature ( C) 50 Nozzle Needle Wetted parts Polished Forged Aluminum Stainless steel Stainless steel Stainless steel FITTINGS Fitting Air Inlet M 1/4" NPS Fluid Inlet M 1/4" NPS AIRCAP PX PGL CONFIGURATION OF THE S3 P HPA SPRAY GUN Max Fluid viscosity in CA 4 Projector type Nozzles Size (mm) Fluid output (cc/mn) Fan width at 20 cm (cm) s 08 PX s 10 PX s 12 PX s 10 PGL PROJECTORS FOR M22 P HPA SPRAY GUNS Max Fluid viscosity in CA 4 Nozzles Air Fan width Projector Fluid output consumption at 20 cm Size (mm) (cc/mn) (m 3 /h) (cm) Type Aircap Needle Nozzle PX PX PX s PGL SEAL KITS Seal kit Repair kit (includes the seal kit)

41 S3 SPRAY GUNS Aircaps for S3 airspray guns Airspray spraying technologies AIRCAPS FOR HTI AIRSPRAY GUNS ESG K HVLP AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines EPX K HVLP Guns S3 G HTi S3 P HTi Fan shape Flat Flat Atomization Type HTi HTi Atomization Quality Excellent Excellent Air 2 bar 7.5 m 3 /h 12 m 3 /h Nozzle size 08/12 08/12 AIRCAPS FOR HPA AIRSPRAY GUNS AM AM AY PX Guns S3 G HPA S3 A HPA S3 A HPA S3 P HPA Fan shape Flat Flat Flat Flat Atomization Type HPA HPA HPA HPA Atomization quality Very good Very good Very good Very good Air 2 bar 10 m 3 /h 13 m 3 /h 14 m 3 /h 10 m 3 /h Nozzle size 08/12 08 / /12 AIRLESS AIRCAPS FOR HPA AIRSPRAY GUNS - AIRCAPS FOR THE LINE PGL PGL Guns S3 G HPA S3 P HPA Fan shape Line Line Atomization type HPA HPA Atomization quality Very good Very good Nozzle size 10 10

42 AIRSPRAY GUNS ACCESSORIES Extensions for M22 pressure fed guns EXTENSIONS FOR PRESSURE-FED M22 SPRAY GUNS Fan type Internal diameter (mm) Length in mm Nozzle type Cone Cone Lateral Lateral Lateral Lateral Gravity cups PART NUMBERS GRAVITY CUPS FOR M22G Material Capacity (L) Fitting White cup (solvent and water-based paints) Polyacetal /4" BSP White Cup (solvent or water-based paints) Polyacetal 0.6 1/4" BSP Grey cup (PU and pre-catalyzed paints) PEHD 0.6 1/4" BSP PART NUMBER GRAVITY CUP FOR S3 G Material Capacity (L) Fitting White cup (solvent and water-based paints) Polyacetal /4" BSP Grey cup (PU- and pre-catalysed paints) PEHD /4" BSP SEAL PACKS AND SCREENS Designation Quantity Pack of non-drip plugs for 0.25 liter and 0.6 liter cups 5 Pack of screens for 0.25 liter and 0.6 liter cups (200 μm) 5 Suction cup - with non-drip system CUP PART NUMBERS FOR M22A Material Fitting Capacity (L) Complete SM6 standard suction cup Aluminum F3/8'' NPS Fitted cover (with tube) Aluminum F 3/8'' NPS Cup only Aluminum CUPPARTNUMBER FORS3A Fitting Material Capacity (L) Suction cup (grey) F 1/4" NPS PeHD 0.25 SEAL PACKS FOR SM6 Quantity Pack of cup seals Pack of non-drip plugs SEAL PACKS FOR S3 A CUP Quantity Pack of 5 non-drip plugs for 0.25 L and 0.6 L cups

43 AIRSPRAY GUNS ACCESSORIES Gravity pressure cup for M22 GSP Airspray spraying technologies PART NUMBER Material Capacity (L) Fitting Pressure cup PeHD (grey) 0.6 1/4" BSP AIRMIX POCHETTE Quantity 10 Funnels with removable strainers for cups AIRLESS FUNNELS Internal diameter (mm) Use Funnel with 2 strainers 105 For cups STRAINERS Internal diameter (mm) Size (μ) Spare strainer Spare element Electrostatic spraying and equipment Hose sleeve PART NUMBER Internal diameter (mm) Length (m) Hoses Sleeve guns FLUID INLET FILTER Fittings on gun Hoses thread F 3/8" NPS M 3/8" NPS SEAL PACKS FOR FLUID INLET FILTER Quantity Pack of n 6 screens 10 Pack of seals 10 Plural component pumps and machines Fittings and air treatment 41

44 AIRSPRAY GUNS ACCESSORIES guns (continued) VARIOUS ACCESSORIES Image Fittings on gun Hoses thread M1/4'' G - F 1/4'' G F 1/4" NPS / M 1/4" NPS Gun inlet pressure gauge for HVLP compliance testing MF 1/4'' NPS Table stand for gravity-fed spray gun - Wall support for gravity-fed spray gun - 42

45 NOTES Airspray spraying technologies Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX

46 A35 HTI SPRAY GUN - STAINLESS STEEL MODULAR AUTOMATIC GUNS FEATURES Excellent atomization quality with outstanding Modular design Built-in valve Fluid output adjustment by indexed button Stainless steel design BENEFITS working environment, lower booth maintenance Quick service: only 4 bolts to unscrew, no need to remove hoses Non air-bleeding gun Perfect readjustment of fan pattern Compatible with water-based materials SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) Fluid output (cc/mn) Upon nozzle (see table) Weight (g) (gun only) Maximum Fluid Temperature ( C) (E3 KHVLP) - 72 (EP3) Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel BASE FOR A35 HTI GUNS Type Side outputs Rear outputs Fluid circulation Circulation in the base Circulation in the base () Material (base plate) Aluminum with stainless steel insert Aluminum with stainless steel insert Weight (g) FITTINGS Power supply Gun base Fluid F 1/4" NPS Atomization air F 1/4" NPS Pilot air F 1/8" NPS AIRCAP E3 KHVLP CONFIGURATION OF THE A35 HTI GUN FITTED WITH BASE - E3 KHVLP AIRCAP Nozzles Fluid output Fan width at 20 cm (cm) Projector type Base type Size (mm) (cc/mn) Minimum Maximum A35 HTi Side outputs E3 KHVLP A35 HTi Rear outputs A35 HTi Side outputs E3 KHVLP A35 HTi Rear outputs A35 HTi Side outputs A35 HTi Rear outputs A35 HTi Side outputs E3 KHVLP A35 HTi Rear outputs A35 HTi Side outputs E3 KHVLP A35 HTi Rear outputs A35 HTi Side outputs E3 KHVLP A35 HTi Rear outputs

47 A35 HTI SPRAY GUN - STAINLESS STEEL PROJECTORS E3 K HVLP FOR A35 HTI GUNS Product viscosity in CA4 (s) or centipoises (cps) MODULAR AUTOMATIC GUNS Nozzles Fan width at 20 cm (cm) Projector Nozzle Aircap Needle Air consumption rate Size (mm) (m 3 /h) (l/mn) Maximum Minimum Type part number part number Airspray spraying technologies 20 s s E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP AIRMIX AIRCAP EP3 CONFIGURATION OF THE A35 HTI GUN FITTED WITH BASE - EP3 AIRCAP Projector type Base type PROJECTORS EP3 FOR A35 HTI GUNS Product viscosity in CA4 (s) or centipoises (cps) Nozzles Fluid output Fan width at 20 cm (cm) Size (mm) (cc/mn) Minimum Maximum A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs A35 HTi Rear outputs A35 HTi Side outputs EP A35 HTi Rear outputs A35 HTi Side outputs 15 EP A 35 HTi Rear outputs A35 HTi Side outputs EP A 35 HTi Rear outputs Nozzles Fan width at 20 cm (cm) Projector Nozzle Aircap Needle Air consumption Size (mm) (m 3 /h) rate (l/mn) Maximum Minimum Type part number part number AIRLESS Electrostatic spraying and equipment < 20 s s EP EP EP EP EP Plural component pumps and machines SUPPORTS Protective cap (x10) KIT Remote adjusting fan width kit Fittings and air treatment 45

48 A 35 HPA SPRAY GUN - STAINLESS STEEL MODULAR AUTOMATIC GUNS FEATURES Excellent atomization quality with outstanding New EN 3L aircap Modular design Built-in valve Fluid output adjustment by indexed button Stainless steel design BENEFITS working environment, lower booth maintenance Unsurpassed wide fan pattern Quick service: only 4 bolts to unscrew, no need to remove hoses Non air-bleeding gun Perfect readjustment of fan pattern Compatible with water-based materials SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 3-5 Fluid output (cc/mn) Upon nozzle (see table) Weight (g) (gun only) Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) 33 Wetted parts Stainless steel - treated stainless steel FITTINGS Power supply Gun base Fluid F 1/4" NPS Atomization air F 1/4" NPS Pilot air F 1/8" NPS CONFIGURATION OF THE A35 HPA GUN WITHOUT BASE Aircap Nozzle A35 HPA without projector, w/o base - - AIRCAP EN 3L CONFIGURATION OF THE A35 HPA GUN FITTED WITH BASE Nozzles Fluid output Fan width at 20 cm (cm) Projector type Base type Size (mm) (cc/mn) Minimum Maximum A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs A35 HPA Side outputs EN 3L A35 HPA Rear outputs

49 A 35 HPA SPRAY GUN - STAINLESS STEEL MODULAR AUTOMATIC GUNS Airspray spraying technologies PROJECTORS EN 3L FOR A35 HPA GUNS AIRMIX Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines Product viscosity in CA4 (s) or centipoises (cps) 20 s s Nozzles Fan width at 20 cm (cm) Air Projector Nozzle Aircap Needle Size consumption rate Minimum Maximum (mm) (m 3 /h) (l/mn) Type part number part number EN 3L EN 3L EN 3L EN 3L EN 3L SUPPORTS Protective cap (x10) AIRLESS KITS Remote adjusting fan width kit 47

50 A25F FLOWMAX GUN - STAINLESS STEEL MODULAR AUTOMATIC GUNS FEATURES Excellent atomization quality with outstanding bellow level Adoption of a bellow seal Compatible with solvent or water-based materials Flushin volume optimized by the bellow technology Modular design BENEFITS working environment, lower booth maintenance Increased reliability Universal use meeting most requirements and unique on the market! The body of the gun can be easily removed from the base: only 4 bolts needed to release, no need to remove hoses and it maintains optimal position even after servicing Dismounting and set-up without hose removal SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 4 Fluid output (l/mn) upon nozzle Weight (g) (gun only) Weight (g) (gun with base plate) 1280 Maximum Fluid Temperature ( C) 50 Air consumption (m3/h) 24 (2.5 bar) Body of the gun Stainless steel Wetted parts Stainless steel - PTFE Gun shown fitted on base FITTINGS Power supply Gun base Fluid F 1/4" NPS Control Air F 1/8" NPS Spraying air F 1/4" NPS Straight M 1/4" BSP - M 1/4" NPS AIRCAP N3C A 25F FLOWMAX GUN KIT WITH BASE Projector type Max Fluid viscosity in CA 4 Nozzles Fluid output Fan width at 20 cm (cm) Size (mm) (cc/mn) Minimum Maximum with base A25F Flowmax 07 N3C 20-30s A25F Flowmax 20-30s A25F Flowmax 12 N3C 20-30s

51 A25F FLOWMAX GUN - STAINLESS STEEL PART NUMBERS Product viscosity in CA4 (s) or centipoises (cps) Tip Size (mm) Air consumption (m 3 /h) Fluid (l/mn) MODULAR AUTOMATIC GUNS Fan width at 20 cm (cm) Nozzle Aircap Needle Minimum Maximum part number Type part number for A25F Airspray spraying technologies 20 s 07 N 3C N 3C N3C N 3C N3C N 23C N 23C N 23C N 23C N 23C LP LP LP LP LP AIRMIX SUPPORTS Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines Protective cap (x10) AIRLESS KITS Remote adjusting fan width kit 49

52 A 29 HTI SPRAY GUN NON-MODULAR AUTOMATIC GUNS FEATURES High opening/closing frequency Needle sealing done by a self-adjusting cartridge Independant fan and atomization control Fluid output adjustment by indexed button BENEFITS Intensive production Outstanding reliability Perfect readjustment of fan pattern Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Fluid output (l/mn) upon tip Weight (g) (gun only) 585 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Fluid circulation yes Wetted parts Stainless steel - Treated stainless steel FITTINGS Power supply Gun Hoses Fluid M 3/8 NPS Atomization air Pilot air AIRCAP E3 KHVLP CONFIGURATION OF THE A 29 HTI SPRAY GUN FITTED WITH KHVLP AIRCAP Nozzles Fan width at 20 cm (cm) Projector type Fluid output (cc/mn) Size (mm) Minimum Maximum 06 E3 KHVLP E3 KHVLP E3 KHVLP E3 KHVLP E3 KHVLP PROJECTORS EP3 K HVLP FOR A29 HTI GUNS Product viscosity in CA4 (s) or centipoises (cps) Nozzles Fan width at 20 cm (cm) Projector Nozzle Aircap Needle Air consumption rate Size (mm) (m3/h) (l/mn) Maximum Minimum Type part number part number 20 s s E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP E3 K HVLP

53 A 29 HTI SPRAY GUN AIRCAP EP3 NON-MODULAR AUTOMATIC GUNS Airspray spraying technologies CONFIGURATION OF THE A 29 HTI SPRAY GUN FITTED WITH EP3 AIRCAP Nozzles Fluid output Fan width at 20 cm (cm) Projector type Size (mm) (cc/mn) Minimum Maximum 06 EP EP EP EP EP AIRMIX PROJECTORS EP3 FOR A29 HTI GUNS Product viscosity in CA4 (s) or centipoises (cps) Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines 20 s s Nozzles Fluid Fan width at 20 cm (cm) Projector Nozzle Aircap Needle Air consumption Size (mm) (m 3 /h) (l/mn) Maximum Minimum Type EP EP EP EP EP AIRLESS SUPPORTS AND ACCESSORIES Protective cap (x10)

54 A 29 HPA SPRAY GUN NON-MODULAR AUTOMATIC GUNS FEATURES High opening/closing frequency Needle sealing done by a self-adjusting cartridge New EN 3L aircap Independant fan and atomization control Fluid output adjustment by indexed button BENEFITS Intensive production Outstanding reliability Unsurpassed wide fan pattern Perfect readjustment of fan pattern Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Fluid output (l/mn) upon tip Weight (g) (gun only) 585 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Aluminum - Stainless steel FITTINGS Power supply Gun Hoses Fluid M 3/8 NPS Atomization air Pilot air AIRCAP EN 3L CONFIGURATION OF THE A 29 HPA SPRAY GUN Nozzles Fan width at 20 cm (cm) Projector type Fluid output (cc/mn) Size (mm) Minimum Maximum 06 EN 3L EN 3L EN 3L EN 3L EN 3L

55 A 29 HPA SPRAY GUN PROJECTORS EN 3L K FOR A29 HPA GUNS Product viscosity in CA4 (s) or centipoises (cps) NON-MODULAR AUTOMATIC GUNS Nozzles Air Fan width at 20 cm (cm) Projector Nozzle Aircap Needle rate consumption Size (mm) (l/mn) (m 3 /h) Minimum Maximum Type Airspray spraying technologies 20 s AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment s EN 3L EN 3L EN 3L EN 3L EN 3L SUPPORTS AND ACCESSORIES Protective cap for automatic guns (6) AIRLESS

56 A28 HPA SPRAY GUN - STAINLESS STEEL NON-MODULAR AUTOMATIC GUNS FEATURES Patented Superlife diaphragm packing (without packings) Hardened S/S nozzle with removable polyurethan end needle Separate fan width and atomization air adjustment BENEFITS Delivers more than 4-5 times a standard package operational life Extends the nozzle lifetime and reduced and quick on site maintenance Optimum spraying of high viscosity materials (circulation recommended to keep product homogeneity) SPECIFICATIONS Maximum air inlet pressure (bar) 6 Trigger air pressure (bar mini) 5,5 3 Recommended atomization air pressure (bar) 6 Fluid output (l/mn) Upon tip Weight (g) 1050 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Body of the gun Wetted parts 4 bar Stainless steel Stainless steel, treated stainless steel, PTFE, elastomer polyurethan FITTINGS Power supply Gun Recommended hoses Fluid F 3/8" NPS Trigger air F 1/8" NPS Spraying air F 1/4" NPS AIRCAP Z 23A N 23C CONFIGURATION OF THE A28 GUN Designation Projector type Use Nozzle Diameter Fan width (cm) Fluid output (cc/mn) A 28 HPA - Gun w/o projector A 28 HPA 207 Z 23A A 28 HPA A 28 HPA 212 Z 23A A 28 HPA 212 N 23C A 28 HPA 215 N 23C A 28 HPA 218 N 23C SEAL KITS Seal kit Repair kit SUPPORT ET ACCESSOIRES Fixing bracket M5 x 16 Screw Pin 54

57 A28 HPA SPRAY GUN - STAINLESS STEEL AIRCAPS FOR A28 NON-MODULAR AUTOMATIC GUNS Airspray spraying technologies Z 23 A N 3C R R S AIRMIX TREATED NOZZLES FOR A28 Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 207T T T T T T T T AIRLESS SPECIFIC NEEDLE FOR A28 Dedicated needle (diaphragm assembly) NEEDLE TIP KIT FOR DEDICATED A28 NEEDLE Needle tip kit for nozzles sized 7 to 23 (x10) Needle tip kit for nozzles sized 33 and 40 (x10) PEHD needle tip kit for nozzles 15 and 18 (x5) KITS Remote adjusting fan width kit for A26 - A28 55

58 A3 HPA SPRAY GUN NON-MODULAR AUTOMATIC GUNS FEATURES BENEFITS For lines SPECIFICATIONS Maximum air inlet pressure (bar) 6 6 Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 3-5 Upon nozzle selected Weight (g) 320 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) 20 Body of the gun Aluminum Wetted parts Aluminum, stainless steel, treated stainless steel FITTINGS Power supply Gun Fitting Fluid F 1/8 NPS Not supplied Control air F 1/8" NPS Pulverization air F 1/8 NPS Not supplied AIRCAP PX GL CONFIGURATION Max Fluid viscosity in CA 4 Projector type Nozzles Fan width at 20 cm (cm) Fluid output Size (mm) Minimum Maximum (cc/mn) w/o base plate A3 HPA 20 s 08 PX A3 HPA 20 s 10 PX A3 HPA 20 s 06 GL A3 HPA 20 s 10 GL A3 HPA 30 s 12 PX PROJECTORS FOR A3 HPA GUNS Product viscosity in CA4 (s) or centipoises (cps) Nozzles Fan width at 20 cm (cm) Air Projector Nozzle Aircap Needle Size rate consumption Minimum Maximum (mm) (l/mn) (m 3 /h) 20 s PX PX PX GL GL SUPPORT KITS du kit A3 indexed needle adjustment kit (precise output adjustment with indexed positioning) Kit part number 56

59 PMP 150 PRATIK PUMP AIRSPRAY PUMPS Airspray spraying technologies FEATURES Simple design Double material diaphragm out of PTFE and nitrile Rugged design SPECIFICATIONS Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Wetted parts Height (cm) 87 Width (cm) Depth (cm) 40 BENEFITS Easy operation and maintenance Compatible with most water-based materials Quick motor inversion Easy to carry PTFE, Polypropylene, Stainless steel AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) CONFIGURATION OF THE PMP 150 PRATIK PUMP Set-up Suction rod Drain rod Ø 6x8 Air motor power regulator M 1/4" NPS Fluid Inlet M 18 x 125 Fluid Outlet M 3/8" NPS Atomization air regulator Air regulator Fluid pressure Without cup Without cup Electrostatic spraying and equipment SEAL PACKS PMP motor seal kit Fluid section seal kit (PTFE) Fluid section seal kit (EPDM) Fluid section seal kit (FPM) FITTING FOR ELECTROSTATIC INSTALLATION (K3 AND SPRAYMIUM) Adaptator F 38"NPS/M 1/2" JIC Plural component pumps and machines TRIPOD, CUPS AND SUCTION RODS Stand for PMP liters gravity cup kit with bracket liters gravity cup kit without bracket PMP 150 PRATIK PUMP KITS Kit designation Gun type Hoses Length (m) Cup Kit part number PMP 150 Pratik 7.5 PMP 150 Pratik M 2215 EN Fittings and air treatment 57

60 PMP 150 PUMP AIRSPRAY PUMPS FEATURES Simple design Double material diaphragm out of PTFE and nitrile Compact design BENEFITS Easy operation and maintenance Compatible with most of solvent or water-based products. Quick motor inversion Easy to carry SPECIFICATIONS Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Wetted parts PTFE, Polypropylene, Stainless steel Height (cm) - wall-mounted 24 Width (cm) - wall-mounted pump 36 Depth (cm) - wall-mounted pump 26 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 18 x 125 Fluid Outlet M 3/8" NPS CONFIGURATION OF THE PMP 150 PUMP Set-up Air motor power regulator Atomization air regulator Air regulator Fluid pressure Suction rod Drain rod Bare pump Wall mounted Wall mounted Wall mounted Wall mounted - Cart mounted Cart mounted Wall-mounted with stainless steel circulation OPTIONS Fluid pressure air regulator Wall-mounted and mobile pumps Wall-mounted and mobile pumps Motor air supply kit Bare pump SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE) Fluid section seal kit (EPDM) Fluid section seal kit (FPM) 58

61 PMP 150 PUMP FITTING FOR ELECTROSTATIC INSTALLATION (K3 AND SPRAYMIUM) Adaptator F 38"NPS/M 1/2" JIC AIRSPRAY PUMPS AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Airspray spraying technologies CARTS, CUPS AND SUCTION RODS 2 liters gravity cup kit with bracket Tripod for PMP liters gravity cup kit without bracket Single Post Cart Complete wall mounting bracket KITS FOR PMP 150 PUMPS Kit designation Gun type Hoses Length (m) Kit part number PMP 150 standard wall-mounted M2215 EN PMP 150 standard wall-mounted with stainless steel circulation M2215 EN PMP 150 standard wall mounted 7.5 PMP 150 standard wall-mounted with stainless steel circulation 7.5 AIRLESS 59

62 PMP 150 E PUMP AIRSPRAY PUMPS FEATURES Simple and rugged design Compact design Charged polypropylene diaphragm and polyurethane balls BENEFITS Compatible with a wide range of materials Easy to carry Compatible with water-based and enamels SPECIFICATIONS Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 5 Diaphragm material Polyurethane Wetted parts Polypropylene, PTFE, polyurethane Height (cm) 22 Width (cm) 20 Depth (cm) 15 FITTINGS Fitting Air Inlet F 3/8" BSP Fluid Inlet F 3/8" BSP Fluid Outlet F 3/8" BSP CONFIGURATION OF THE PMP 150E PUMP Set-up Suction rod Drain rod Atomization air regulator Air regulator Fluid pressure Bare OPTIONS Motor air supply kit SEAL PACKS PMP motor seal kit Fluid section seal kit (PTFE) CARTS, CUPS AND SUCTION RODS Tripod for PMP liters gravity cup kit with bracket liters gravity cup kit without bracket Single Post Cart Complete wall mounting bracket

63 PMP 150 TRANSFER PUMP AIRSPRAY PUMPS Airspray spraying technologies FEATURES Double material diaphragm out of PTFE and nitrile Simple design Compact design BENEFITS Possibility of large outputs Compatible with most of solvent or water-based products. Quick motor inversion Easy operation and maintenance Easy set-up in the workshop AIRMIX SPECIFICATIONS Pressure ratio 1/1 Fluid volume per cycle (cm3) 100 Number of cycles per litre of products 10 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 1.1 Fluid Output at 30 cycles/mn (l/mn) 3 Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - bare pump 7.4 Wetted parts PTFE, Polypropylene, Stainless steel Height (cm) 22 Width (cm) 20 Depth (cm) 15 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Fluid Inlet F 3/4" NPS Fluid Outlet F 3/8" BSP AIRLESS Electrostatic spraying and equipment CONFIGURATION OF THE PMP 150 PUMP Set-up Air motor power regulator Air regulator Fluid pressure Fluid pressure regulator Suction rod Drain rod Bare Transfer PMP 150 pump Plural component pumps and machines OPTION Motor air supply kit SEAL KITS PMP motor seal kit Fluid section seal kit (PTFE) Fittings and air treatment 61

64 02.75 PUMP AIRSPRAY PUMPS FEATURES Compact design Rugged - High sealing capacity with singlelip seal Available in stainless steel version BENEFITS Compatible with a wide range of materials Compatible with water-based materials SPECIFICATIONS Pressure ratio 1.8/1 Fluid volume per cycle (cm 3 ) 85 Number of cycles per litre of products 12 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 2.1 Fluid Output at 30 cycles/mn (l/mn) Maximum air inlet pressure (bar) 6 10 Maximum Fluid Temperature ( C) 60 Sound level (dba) 81 Sealing Packings Upper sealing GT cartridge with polyethylene packing Lower sealing Acetal resin seal Weight (kg) - bare pump 5 Wetted parts Aluminum, stainless steel Height (cm) 41 Width (cm) - 2 regulators 28 Depth (cm) 17 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 18x125 Fluid Outlet M 3/8" NPS CONFIGURATION OF THE PUMP Set-up Additional regulator Atomization air regulator Air regulator Fluid pressure Suction rod Drain rod Pump output Standard, bare Standard, wall-mounted Bare, stainless steel Wall-mounted, stainless steel Wall-mounted, stainless steel with 2 air SEAL KITS Seal kit for air motor FITTING FOR ELECTROSTATIC INSTALLATION (K3 AND SPRAYMIUM) Adaptator F 38"NPS/M 1/2" JIC CARTS AND SUCTION RODS Single Post Cart

65 PRESSURE POTS PRESSURE POTS Airspray spraying technologies SPECIFICATIONS Type 5 liters 5 liters 10 liters 10 liters 10 liters Vessel coating Rilsanised Rilsanised Galvanised Galvanised Galvanised Internal diameter (mm) Total height (vessel + cover) (mm) Vessel height (mm) Weight (kg) Pressure air regulator 1/4" 1/4" 1/4" 1/4" 1/4" Air regulator Gun - - 1/4" 1/4" 1/4" Removable stainless steel bucket Agitator Fluid output(s) Upper Lower Upper Upper Upper AIRMIX AIRLESS SPECIFICATIONS Type 30 liters 30 liters 30 liters 52 liters 52 liters 52 liters Vessel coating Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Internal diameter (mm) Total height (vessel cover) (mm) Vessel height (mm) Weight (kg) pressure (bar) Pressure air regulator 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" Air regulator Gun 1/4" 1/4" 1/4" 1/2" 1/2" 1/2" Removable stainless steel bucket Agitator - - Fluid output(s) Upper Upper Upper Upper (x2) Upper (x2) Upper (x2) FITTINGS Type 5 liters pressure pot 10 to 30 liters pressure pots 50 liters pressure pot Fitting Air Inlet M 1/4" NPS F 3/4" NPS F 3/4" NPS Air Outlet M 1/4" NPS M 1/4" NPS (x2) M 1/4" NPS Fluid Outlet M 3/8" NPS M 3/8" NPS (x2) M 3/8" NPS Electrostatic spraying and equipment Plural component pumps and machines FITTING FOR ELECTROSTATIC INSTALLATION (K3 AND SPRAYMIUM) Adaptator F 3 8"NPS/M 1/2" JIC Fittings and air treatment

66 STAINLESS STEEL PRESSURE POTS PRESSURE POTS SPECIFICATIONS Type 15 liters 30 liters 52 liters Cover material Stainless steel Stainless steel Stainless steel Vessel material Stainless steel Stainless steel Stainless steel Internal diameter (mm) Total height (vessel + cover) (mm) Vessel, cover and agitator height (mm) Operational Internal height (mm) Number of clamps Weight (without/with agitator) (kg) 21/23 23/25 31/33 Number of handle (s) Valve adjustment (psi) Maximum Fluid Temperature ( C) Pressure air regulator Number of regulators (Top and Bottom) Agitator According to model FITTINGS Type 15 liters 30 liters 52 liters Fitting Air Inlet 3/8" BSP 3/8" BSP 3/8" BSP Fluid outlet Lower 1" NPT 1" NPT 1" NPT Upper 3/8" NPS 3/8" NPS 3/8" NPS PRESSURE POTS PART NUMBERS Capacity (L) Pneumatic agitator Pressure air regulator Bottom Top 15 Liters Liters Liters Liters Liters Liters FITTING FOR ELECTROSTATIC INSTALLATION (K3 AND SPRAYMIUM) Adaptator F 38"NPS/M 1/2" JIC

67 PRESSURE POTS Funnels with removable strainers for pressure pots FUNNELS Diameter (mm) Use Large funnels with 2 strainers (510 and 210 μ) L - 30 L Small funnels with 2 strainers (510 and 210 μ) L STRAINERS Diameter (mm) Size (μ) Spare element for large funnel Spare strainer for small funnel Airspray spraying technologies AIRMIX Accessories and parts ACCESSORIES Capacity (L) Ø/Dimensions Stainless steel spare bucket Cover seal EPDM cover seal (1) AIRLESS Electrostatic spraying and equipment REGULATORS Red knob regulator regulators 1/4" with isolating valves 2 manometers, 1 inlet valve - 1 outlet valve M 1/4" NPS 2 regulators (1/4" + 1/2") with isolating valves 2 manometers, 1 inlet valve - 2 outlet valves M 1/4" NPS Plural component pumps and machines MOTORIZED AGITATOR Capacity (L) 10 L L L Fittings and air treatment 65

68 BP 60 HEATERS HEATERS FEATURES A thermometer is integrated into the command box Modular design BENEFITS No pressure loss when working with high viscosity materials Easy maintenance SPECIFICATIONS Termostatic type Liquid dilatation and dry contact Thermal fuse Cut-out at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 250 Weight (kg) 23 Wetted parts Room temperature ( C) 40 maxi BP HEATER - STAINLESS STEEL VERSION Stainless steel heater Volatge / Power Cable length Fitting Temperature ( C) Volt Watt w/o plug (m) Inlet Outlet BP M M

69 AD 60/61 HEATERS NON EXPLOSIVE HEATERS Airspray spraying technologies FEATURES A thermometer is integrated into the command box Modular design BENEFITS No pressure loss when working with high viscosity materials Easy maintenance AIRMIX SPECIFICATIONS Thermostat type Thermal fuse Cut at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 240 maxi Weight (kg) Aluminum: 15.5 Stainless steel: 25 Wetted parts Room temperature ( C) Aluminum: aluminum body, galvanized chrome 40 maxi Electrostatic spraying and equipment Fittings and air treatment Plural component pumps and machines AIRLESS AD HEATERS - ALUMINUM VERSION (SOLVENT-BASED MATERIALS) Aluminum heater AD HEATERS - STAINLESS STEEL VERSIONS (SOLVEN OR WATER-BASED MATERIALS) Stainless steel heater Voltage / Power Cable length Fitting Temperature ( C) Volt Watt w/o plug (m) Inlet Outlet Voltage / Power Cable length Fitting Temperature ( C) Volt Watt w/o plug (m) Inlet Outlet AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC

70 ACCESSORIES FOR HOT CIRCULATION Y-FITTING PART NUMBERS Fittings on gun Hoses thread F 3/8" NPS M 1/4" NPS Circulation valve (for solvent-based materials) CIRCULATION VALVES PART NUMBERS (NON STAINLESS STEEL) Thread Flushing rod M 18 Flushing valve Pump intake Rod x 125 F 26 x 125 M 26 x 125 M 1/2 JIC M 1"G M 35 x 150 M 3/4 JIC

71 CTM COLOR CHANGE VALVES AIRSPRAY CIRCULATINGS Fittings and air treatment AIRMIX Electrostatic spraying and equipment Plural component pumps and machines Airspray spraying technologies PTFE seals CTM VALVE SPECIFICATIONS ACCESSORIES Designation Conventional Max pressure (bar) 8 8 Trigger air for hose 2,7 4 Fluid inlet F 1/4 NPS Fluid outlet F 1/4 NPS Conventional Inlet module (product and solvent inlet) Conventional Intermediate module (product inlet) Conventional Assembly module rods comes with outlet module: (1) Assembly module rod (pack of 2) comes with outlet module: AIRLESS 69

72 PDM PUMP AIRSPRAY CIRCULATINGS FEATURES Simple design Diaphragm made of PTFE Compact design BENEFITS Easy operation and maintenance Compatible with most water-based materials Easy to carry SPECIFICATIONS Pressure ratio 1/1 Fluid volume per cycle (cm 3 ) 350 Number of cycles per litre of products 3 Fluid Output at 30 cycles/mn (l/mn) Maximum air inlet pressure (bar) 6 6 Maximum Fluid Temperature ( C) 50 Sound level (dba) <70 Weight (kg) - wall-mounted 13 Wetted parts PTFE, Stainless steel, Aluminum Height (cm) Width (cm) 24.5 Depth (cm) 31.5 FITTINGS Fitting Air Inlet F 3/8" BSP Fluid Inlet M 26 x 125 Fluid Outlet F 1/2" NPS CONFIGURATION OF THE PDM PUMP Set-up Suction rod Drain rod Atomization air regulator Air regulator Fluid pressure Bare pump Wall mounted pump SUCTION RODS 70

73 PUMP - STAINLESS STEEL AIRSPRAY CIRCULATINGS Airspray spraying technologies FEATURES Compact design Rugged - High sealing capacity with singlelip seal Hot or cold spraying SPECIFICATIONS Pressure ratio 4/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) 7.2 Air 30 CPM at 5 bar Maximum air inlet pressure (bar) 6 24 Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing FITTINGS Lower sealing Weight (kg) - wall-mounted 27 Wetted parts Height (cm) 83 Width (cm) 40 Depth (cm) 21 Fitting Air Inlet F 3/4 BSP Fluid Inlet Fluid Outlet BENEFITS Easy to carry Compatible with a wide range of materials To spray a large range of products with the best conditions PEHD Stainless steel M 26x125 M 1/2 JIC AIRMIX AIRLESS Electrostatic spraying and equipment CONFIGURATION OF THE PUMP KITS Seal kit H120 Repair kit H120 Set-up Suction rod Drain rod Seal kit for air motor Repair kit for air motor Atomization air regulator Air regulator Fluid pressure Bare Wall-mounted Wall-mounted - Cart-mounted - Plural component pumps and machines CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings and air treatment 71

74 04.120F FLOWMAX PUMP - STAINLESS STEEL AIRSPRAY CIRCULATINGS FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity SPECIFICATIONS Pressure ratio 4/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 Cycles/mn (l/mn) Air 30 CPM at 5 bar 10.3 Maximum air inlet pressure (bar) 6 24 Maximum Fluid Temperature ( C) 50 Sound level (dba) < 82 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Wetted parts Stainless steel Weight (kg) 27 Height (cm) 104 Width (cm) 40 Depth (cm) 21 FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet M 26 x 125 Fluid Outlet M 3/8" NPS CONFIGURATION OF THE FLOWMAX F PUMP Set-up Drain rod Suction rod Atomization air regulator Air regulator Fluid pressure Bare Wall-mounted Wall-mounted - Cart-mounted - CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate 72

75 04.220F FLOWMAX PUMP - STAINLESS STEEL AIRSPRAY CIRCULATINGS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX SPECIFICATIONS Pressure ratio 4/1 Fluid volume per cycle (cm3) 440 Number of cycles per litre of products 2.3 Fluid Output at 20 Cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 78 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Wetted parts Hard chrome stainless steel, stainless steel and carbide Weight (kg) 52 Height (cm) 110 Width (cm) 38 Depth (cm) 27.5 AIRLESS Electrostatic spraying and equipment FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet Fluid Outlet CONFIGURATION OF THE FLOWMAX F PUMP Set-up Suction rod Drain rod F 3/4" BSP F 3/4" BSP Atomization air regulator Air regulator Fluid pressure Wall-mounted Turbo wall-mounted Plural component pumps and machines CARTS, FILTER AND RODS (SUCTION AND FLUSHING) Two Reinforced Arms w/o mounting plate Fittings and air treatment

76 PRESSURE REGULATOR Pressure regulator - low pressure manual control CHARACTERISTICS Pressure range (bar) Inlet 40 max. Outlet (upon version) Weight (kg) 1.3 Width (cm) 8.5 Height (cm) Large passages 17 Small passage 16.5 Wetted parts Stainless steel, PTFE, carbide REGULATOR FITTINGS LARGE PASSAGE Fitting Fluid inlet (w/o adaptator) M 1/4 BSP Fluid Outlet F 1/4 BSP (x2) REGULATOR FITTINGS SMALL PASSAGE Fitting Fluid Inlet F 1/4 NPS Fluid Outlet F 1/4 BSP (x2) CONFIGURATION Manometer Bare pressure regulator PP (small passage) Pressure regulator PP (small passage) Bare pressure regulator GP (large passage) - charged materials Pressure regulator GP (large passage) - charged materials Pressure regulator - Piloted low pressure CHARACTERISTICS Pressure range (bar) Inlet Small passage 40 max Large passage 6 max manual command 10 max Outlet bar Command air 6 max Wetted parts Stainless steel, PTFE, carbide Piloted regulator SMALL PASSAGE REGULATOR - FITTINGS AND DIMENSIONS Fitting Fluid Inlet F 1/4" NPS Fluid Outlet F 1/4" BSP Air inlet (command) F 1/8" BSP Weight (kg) 1 Width (cm) 8.5 Height (cm) 7.3 LARGE PASSAGE REGULATOR - FITTINGS AND DIMENSIONS Fitting Fluid Inlet M 1/4" BSP + (M18x125, M3/8" NPS, M3/8"BSP) Fluid Outlet F 1/4 BSP Air inlet (command) F 1/8 BSP Weight (kg) 1 Width (cm) 7.3 Height (cm)

77 PRESSURE REGULATOR Pressure regulator - Piloted low pressure (continued) MANUAL CONTROL PILOTED REGULATOR - FITTINGS AND DIMENSIONS Fitting Fluid Inlet M 1/4" BSP + (M18x125, M3/8" NPS, M3/8"BSP) Fluid Outlet F 1/4" BSP Weight (kg) 1.6 Width (cm) 20 Height (cm) 8.5 CONFIGURATION Material Piloted stainless steel pressure regulator Stainless steel small passages Piloted stainless steel pressure regulator large passage Stainless steel large passages Piloted non-stick treated pressure regulator Non-stick Piloted regulator with wall bracket and pressure gauge Stainless steel Piloted regulator manual control Airspray spraying technologies AIRMIX Pressure regulator - Back low pressure SPECIFICATIONS Pressure (bar) - regulated materials 4 max Weight (kg) 1.3 Width (cm) 8.5 Height (cm) 16.8 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 1/4" BSP Fluid Outlet M 1/4" BSP + (M18x125, M3/8"NPS, M 3/8"BSP) CONFIGURATION Back pressure regulator Options: - - Wall bracket Pressure gauge: stainless MF 1/4 elbow Stainless steel tube Stainless steel shroud Gauge AIRLESS Electrostatic spraying and equipment Plural component pumps and machines High pressure gauges HIGH PRESSURE GAUGES Pressure range (bar) Fitting Internal diameter (mm) Diaphragm high pressure gauge M 3/8" NPS 50 Pressure gauge side inlet M 1/4 G 63 Pressure gauge side inlet M 1/4 G 63 Fittings and air treatment 75

78 FILTRATION Filter 60 bar CONFIGURATION EQUIPPED FILTER medium pressure Stainless steel Filter 3/8"- Low pressure pressure (bar) Stainless steel 60 6 Thread Inlet Outlet Drain F 3/8" NPT (x1) F 3/8" NPT (x2) F 3/8" G cuve (x1) M 1/4" NPT M 1/2" JIC (1) M 18x Strainers for suction rods STRAINERS CONFIGURATION Pump Height (mm) External diameter (mm) Material Micron Filtration size Mesh PMP150 / Polyamide PDM / / F Inox F Polyamide SCREEN CONFIGURATION (FILTRATION SURFACE 65 CM 2 ) Filtration size Filter number Micron Mesh Nozzle size

79 NOTES Airspray spraying technologies Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX 77

80 CYCLIX AGITATORS FOR L DRUMS AGITATORS FEATURES Stainless steel (agitator cover, suction and drain rods) Adjustable suction rod height Suction and return tubes Double effect jack with 3 positions command lever: up, stop, down The agitator cannot work during elevator movements BENEFITS Compatibility with all materials No product loss Suitable for recirculating Security CHARACTERISTICS Capacity (L) Motor type Pneumatic Pneumatic Reductor type - Gear train Rotation speed (rpm) Motor torque Nm CYCLIX PART NUMBERS FOR L DRUMS Elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Elevator for l drums 1024 (min) (max) Agitator for l drums Cover for l drums Suction/exhaust kit CYCLIX PART NUMBERS FOR 200 L DRUMS Elevator height (mm) Agitator rod length (mm) Paddle diameter (mm) Cover diameter (mm) Elevator for 200 l drums 1510 (mini) (maxi) Agitator for 200 l drums Cover for 200 l drums Suction/exhaust kit RECOMMENDED ACCESSORIES Exhaust assembly with oil recovery (length 1 m) Air feeding kit Drum roller unit for 200 litres drum Slotted paddle for thick materials 78

81 AGITATORS Agitators for edge pail mounting Airspray spraying technologies AGITATORS Bare agitator Agitator with 25 cm hose Agitator with 5 m hose System for barrel mounting AIRMIX Stainless steel agitators on cover Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AGITATORS AIRLESS 79

82 HOSES Product hoses for airspray spraying HOSES CONFIGURATION Designation Material Rubber/ PEBD internal sheath Polyamide (1) Internal diameter mm 6.35 (1/4") (1/4") Maximum pressure: bar Color blue white Temperature up to 60 C P.N. without P.N. without P.N. without P.N. without SK collar lengths with fittings part number A and B (free nut) 1/4" NPS 3/8" NPS 0.55 m /4" NPS 3/8" NPS 1 m (2) m m m m Product hoses for suction rod HOSE FOR SUCTION ROD Designation Polyethylene hose sleeve Ø 9.5 mm Ø 19 mm Ø 25 mm 5 m cut m cut m cut SK collar 80

83 HOSES Nitrile air hoses Airspray spraying technologies HOSES CONFIGURATION Material Nitrile Nitrile Nitrile Nitrile Color Black Black Black Black Internal diameter (mm) Conductor yes yes yes yes Color Gold Green White Blue Maximum pressure bar 10 P.N. by 5m P.N. by 15m P.N. by 25m P.N. by 100m Collar SK according to length with fittings Fitting A and B 1/4" NPS 3/8" NPS 26 x m m m m m m m m m m m m Polyamid or polyurethane air hoses HOSES CONFIGURATION Matière Polyamide Polyurethan Color translucent black blue black Internal diameter (mm) 2.7 x 4 4 x 6 6 x 8 6 x 8 8 x 10 4 x 6 6 x 8 8 x 12 Conductive No Maximum operating 10 pressure bar Temperature up to 60 C P.N. without fittings 25 m m m AIRMIX AIRLESS Electrostatic spraying and equipment Plural component pumps and machines Hose sleeve PART NUMBERS Product hole (mm) Length (m) Hoses Sleeve Fittings and air treatment 81

84 MISCELLANEOUS Lubricants and greases for pumps LUBRICANT FOR PUMP PACKINGS Lubricants for pump fittings T lubricant (1/4 l) can for solvent-based paints Kit of 3 T lubricant cans (2L each) Kit of 3 P lubricant cans (2L each) Grease Vaseline 1 kg "special PMP" Box of 450 g PTFE grease Techni Lub tube Box of grease (450g) Miscellaneous PART NUMBERS M22/Xcite gun wrench Large size brush Small size brush Large blow gun Viscosity cup N 4 CA4 Thickness gauge from 25 to 2000μ Adhesive-roller with KREMLIN REXSON logo (75mm x 100m)

85 RC 500 FULL VISOR MASK PROTECTION Airspray spraying technologies FEATURES AIRMIX Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment Complete assembly with protection screen Light and ergonomic Adjustable head and front protection Easy disposable screen protectors BENEFITS Complete protection of the operator face and eyes (against isocyanates especially) Reliable operator health protection against all type of paints, dust... Reduced fatigue and excellent working conditions for increased productivity Constant operator protection Suitable for everyone and user-friendly Easy maintenance SPECIFICATIONS Operating pressure (bar) Maximum temperature ( C) 35 RC500 complete assembly AIRLESS CONFIGURATION OF THE RC 500 FULL-VISOR MASK RC 500 full-visor mask complete (without network 10m air hose) General supply air hose (compliant - length 10m) ACCESSORIES Quantity RC 500 full-visor mask alone (without belt or supply 10m air hose) 1 Screen protector Mask/belt air hose 1

86 RC 756 RESPIRATORS PROTECTION FEATURES Respirator body made of silicone Equipped with large inlet and outlet valves (solvented, water-based or multi with isocyante materials) BENEFITS Hypoallergenic and high comfort Easy breathing Comfortable Performance (large diameter), visibility and high level of safety For an optimal protection whatever the type of paint used CONFIGURATION OF THE RC 756 RESPIRATOR RC 756 respirator FILTERS & PRE-FILTERS Type Quantity Filters for solvented paints A Filters for water-based paints A1B1P Filters for plural-components-isocyanates A1B1E1K1P ACCESSORIES Quantity Attach strap Spare inlet/outlet valves

87 ACCESSORIES FOR PROTECTION Protective overalls Airspray spraying technologies PART NUMBERS AIRMIX Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment Size Quantity Overalls Size S for 5 sets S Overalls Size M for 5 sets M Overalls Size L for 5 sets L Overalls Size XL for 5 sets XL Overalls Size XXL for 5 sets XXL Protective hood Non-woven, light and lets the skin breathe Conforms to European Standards AIRLESS PART NUMBERS Quantity Protective hood

88 86 NOTES

89 AIRMIX SPRAYING

90 XCITE AIRMIX GUN AIRMIX SPRAY GUNS New Sensations for New Performances The Xcite gun is the result of KREMLIN REXSON experience since The Xcite gun brings an excellent comfort to the operator. Its ultra light trigger, improve the productivity and stop all risks of RSI (Repetitive strains injuries) The new Xcite gun uses high quality components which ensure a perfect reliability maintaining a high level of performances. The last generation of Airmix the tip while using minimum atomization air and pressure. It's really useful when painting complex shape parts. 86 % * TRANSFERT EFFICIENCY HVLP COMPLIANT +/- 2% according to norm (EN ) FEATURES Ergonomic design and light trigger Nickeled brass air needle Increased atomization quality BENEFITS Reduced fatigue and excellent working conditions for increased productivity Compatible with water-based materials Long service life and good reliability productivity Outstanding spraying quality with reduced overspray Simple using SPECIFICATIONS Sprayed materials Polyurethanes, water-based products, high solids, twocomponents products, stains, lacquers, varnishes, etc. Body of the gun Forged aluminum Fluid Pressure Range (bar) Maximum air inlet pressure (bar) 6 Recommended atomization air pressure (bar) Fluid output (l/mn) Depends on the tip used Weigth Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel, PTFE, carbide Safety Trigger lock #6-85 mesh/ 168μ FITTINGS Fitting Air Inlet M 1/4 NPS Fluid Inlet M 1/2" JIC AIRCAP VX 24 KHVLP CONFIGURATION OF THE XCITE SPRAY GUN WITH AIRCAP AND FLUID SWIVEL FITTING Gun type Aircap Tip pressure (bar) Seat Xcite 120 VX 24 KHVLP To be ordered separately (see table) 120 Stainless steel Xcite 200 VX 24 KHVLP To be ordered separately (see table) 200 Carbide

91 XCITE AIRMIX GUN AIRCAP VX 24 KHVLP AIRMIX SPRAY GUNS Airspray spraying technologies CONFIGURATION OF THE XCITE SPRAY GUN WITH AIRCAP WITHOUT FLUID SWIVEL FITTING SEAL KITS Gun type Aircap Tip pressure (bar) Seal kit for Xcite gun (air) Repair kit for Xcite gun (seal kits included) Seat Xcite 120 VX 24 KHVLP To be ordered separately (see table) 120 Stainless steel Xcite 200 VX 24 KHVLP To be ordered separately (see table) 200 Carbide AIRMIX OLD GENERATION SEAL KITS Seal kit for MVX spray gun Repair kit for MVX spray gun (seal kit included) XCITE KITS WITH AIR AND FLUID HOSES Aircap Type Tip (mm) Diameter hose (mm) Hoses Length (m) Kit part number Xcite 120 VX 24 K HVLP To be ordered separately (see table) Xcite 200 VX 24 K HVLP To be ordered separately (see table) AIRLESS XCITE AIR AND FLUID HOSES KITS Diameter pressure (bar) (mm) Hoses Length (m) Hoses protection Kit part number Fluid and air hoses kit Fluid and air hoses kit Electrostatic spraying Aircaps for AIRMIX spray guns AIRCAP FOR XCITE SPRAY GUN VX24 For XCITE spray guns Spraying quality Excellent Excellent Non-stick coating - Plural component AIRCAPS FOR OLD STYLE AIRMIX SPRAY GUNS VX 14 For MVX spray gun Spraying quality Excellent Fittings 89

92 AIRMIX TIPS AIRMIX SPRAY GUNS tip needs to be To order a tip, replace the "x" characters in the table, by the chosen tip number in 134.5xx.xx4 for a Fine Finish or 134.5xx.xx2 for an Xtra Fine Finish tip, recommended for water-based materials or for an increased atomization quality due to the pre-atomization. (For example: order (Fine Finish) or (Xtra Fine Finish) if choosing a tip) (only tip has part number ) TABLE OF FINE FINISH TIPS Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking Marking on pump Caliber (mm) Gun Pump or or or or or or TABLE OF XTRA FINE FINISH TIP Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking Marking on pump Caliber (mm) Gun Pump or or or or or or

93 AIRMIX GUNS ACCESSORIES PART NUMBERS Tip size Microscreen (99 μ) (pack of 10) PTFE O'ring seals (pack of 10) and above PART NUMBERS Nozzles Size (mm) Quantity Unclogging needles Unplugging needles Seats for spray guns SEATS FOR XCITE SPRAY GUNS Type Quantity Polyacetal Stainless steel with seal Carbide with seal SEATS FOR MVX SPRAY GUNS Type Quantity Polyacetal Stainless steel with seal Carbide with seal SEAL KIT FOR AIRMIX GUNS Quantity Seals for stainless steel or carbide seats Airspray spraying technologies AIRMIX AIRLESS Electrostatic spraying PART NUMBERS Stainless steel screen for filter Size (μ) Quantity N N N Plural component For air adjustment at the gun inlet ADJUSTING NEEDLE VALVES Fittings 91

94 AIRMIX GUNS ACCESSORIES Extensions for Airmix spray guns AIRMIX EXTENSIONS FOR XCITE SPRAY GUNS Length in mm Straight extension EXTENSIONS FOR MVX SPRAY GUNS Length in mm Straight extension Elbow extension (45 angle) a third gun (non stainless steel construction) ADAPTOR TO FEED TWO OR THREE GUNS Adaptor divider TWO-GUN SYSTEM Material Stainless steel Stainless steel

95 NOTES Airspray spraying technologies Fittings Plural component Electrostatic spraying AIRLESS AIRMIX 93

96 AVX AIRMIX SPRAY GUN - STAINLESS STEEL Light AIRMIX technology - Modular design for High Volume Production The AVX Airmix gun, thanks to its size and reduced weight increase the The atomization quality offered by last generation aircaps and tips AUTOMATIC AIRMIX GUNS % * TRANSFERT EFFICIENCY HVLP COMPLIANT FEATURES Light AIRMIX technology: Reduced size and weight Excellent atomization quality with outstanding Stainless steel design Choice of circulation in the base or the gun Choice of bases with rear or side connections Choice of tips for water-based materials BENEFITS Optimal application performances working environment, lower booth maintenance Compatible with water-based materials Performance level guaranteed for most materials and The design of the gun optimizes performances optimizes application performances +/- 2% according to norm (EN ) SPECIFICATIONS Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) Fluid output (cc/mn) Upon tip (see Airmix table) Weight (g) (gun only) 452 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel Seat Comes in stainless steel, carbide or polyacetal as an option FITTINGS Power supply Gun base Fluid F 1/4" NPS M 1/2 JIC - blue Airmix hose, Ø 4.8 or 6,35 mm Atomization air F 1/4" NPS M 1/4" NPS - air hose Ø 7 int Pilot air F 1/8" NPS Ø 4x6 CONFIGURATION OF THE AVX GUN FITTED WITHOUT BASE Version Aircap Nozzle AVX gun ( ) circulation in the base (1) (1) AVX gun ( ) circulation in the gun (1) (1) CONFIGURATION OF THE AVX GUN FITTED WITH BASE Base type Version Aircap Nozzle AVX gun ( ) side outputs circulation in the base (1) (1) AVX gun ( ) side outputs circulation in the gun (1) (1) AVX gun ( ) rear outputs circulation in the base (1) (1) AVX gun ( ) rear outputs circulation in the gun (1) (1) (1)To be ordered separately - see table page 99 KITS

97 AVX AIRMIX SPRAY GUN - STAINLESS STEEL BASES FOR THE AVX GUN FITTING KITS AUTOMATIC AIRMIX GUNS Base type Weight (g) Base for AVX (circulation in the base ( ) side outlet 240 stainless steel Base for AVX (circulation in the gun ( ) Base for AVX (circulation in the base ( ) rear outlet 480 stainless steel Base for AVX (circulation in the gun ( ) Fitting kit for side outlet base Fitting kit for rear outlet base AIRMIX Fittings Plural component Electrostatic spraying Airspray spraying technologies SUPPORTS Mounting support Ø Mounting support Ø KIT AIRLESS 95

98 ATX AIRMIX SPRAY GUN - STAINLESS STEEL The ATX Airmix gun, with its unsurpassed quality of atomization provides in most markets. AUTOMATIC AIRMIX GUNS FEATURES Excellent atomization quality with outstanding Modular design Stainless steel design BENEFITS working environment, lower booth maintenance Quick service: only 4 bolts to unscrew, no need to remove hoses Compatible with water-based materials SPECIFICATIONS Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 1-3 Fluid output (cc/mn) Upon tip (see Airmix table) Weight (g) (gun only) 750 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Stainless steel - treated stainless steel Seat Stainless steel FITTINGS Power supply Gun base Fluid F 1/4" NPS Elbow M 1/4" NPT - M 1/2 JIC Atomization air F 1/4" NPS M 1/8" BSP - 4x6 hose Pilot air F 1/8" NPS M 1/4" BSP - M 1/4" NPS CONFIGURATION OF THE ATX GUN FITTED WITHOUT BASE Version Aircap Nozzle ATX gun ( ) circulation in the base (1) (1) ATX gun ( ) circulation in the gun (1) (1) (1)To be ordered separately - see table XXX BASE FOR ATX GUN Base type Weight (g) ATX base (circulation in the base ( ) side outlet 310 stainless steel ATX base (circulation in the gun ( ) KITS Support and screen n 2 kit Support and screen n 4 kit Support and screen n 6 kit Support and screen n 12 kit SUPPORTS Mounting support Ø Mounting support Ø KIT

99 AXC AIRMIX SPRAY GUN - STAINLESS STEEL Compact AIRMIX technology - reduced size. The AXC Airmix gun, thanks to its ultra-compact size and very reduced machines. The atomization quality offered by last generation aircaps and tips AUTOMATIC AIRMIX GUNS Airspray spraying technologies FEATURES Compact Airmix technologie - reduced size and weight Excellent atomization quality with outstanding Stainless steel design Choice of tips for water-based materials BENEFITS Optimal application performances working environment, lower booth maintenance Compatible with water-based materials The design of the gun optimizes performances optimizes application performances AIRMIX SPECIFICATIONS Maximum air inlet pressure (bar) Trigger air pressure (bar mini) 3 Recommended atomization air pressure (bar) 1-3 Fluid output (cc/mn) Weight (g) (gun only) 472 Maximum Fluid Temperature ( C) 50 Air consumption (m 3 /h) Wetted parts Seat FITTINGS Power supply Fluid Atomization air Pilot air Upon tip (see Airmix table) Stainless steel - treated stainless steel Comes in stainless steel, carbide or polyacetal as an option M 1/2 JIC - blue Airmix hose, Ø 4,8 or 6,35 mm AIRLESS Electrostatic spraying CONFIGURATION OF THE AXC GUN Aircap Nozzle AXC gun w/o tip nor aircap (1) (1) and w/o Air Fittings (1)To be ordered separately - see table 99 KITS Plural component SUPPORTS Mounting support Ø KITS guns Fittings 97

100 AUTOMATIC AIRMIX GUNS Aircaps for AIRMIX AIRCAPS FOR AVX SPRAY GUNS VX124 VX24 VX54 For AVX spray guns (1) Spraying quality Excellent Excellent Good Excellent Excellent Very good Non-stick coating - - AIRCAPS FOR ATX SPRAY GUNS BX116 BX16 BX 56 ATX gun (1) Spraying quality Excellent Excellent Good Good Good Very good Non-stick coating - - AIRCAPS FOR AXC SPRAY GUNS VX114 VX14 VX54 For AXC spray guns (1) Spraying quality Excellent Excellent Good Very good Very good Very good Non-stick coating - - (1)To be used with the remote fan width adjustment kit 98

101 AIRMIX TIPS tip needs to be To order a tip, replace the "x" characters in the table, by the chosen tip number in 134.5xx.xx4 for a Fine Finish or 134.5xx.xx2 for an Xtra Fine Finish tip, recommended for water-based materials or for an increased atomization quality due to the pre-atomization. (For example: order (Fine Finish) or (Xtra Fine Finish) if choosing a tip) (only tip has part number ) TABLE OF FINE FINISH TIPS Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking Marking on pump AIRMIX SPRAY GUNS Caliber (mm) Gun Pump or or or or or or AIRMIX Electrostatic spraying Plural component Fittings Airspray spraying technologies AIRLESS TABLE OF XTRA FINE FINISH TIP Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Water output (l/mn) Pressure (bar) Screen marking Marking on pump Caliber (mm) Gun Pump or or or or or or

102 ACCESSORIES FOR AIRMIX SPRAY GUNS PART NUMBERS Tip size Microscreen (99 μ) (pack of 10) PTFE O'ring seals (pack of 10) and above PART NUMBERS Nozzles Size (mm) Quantity Unclogging needles Unclogging needles Seats for automatic spray guns SEATS FOR AVX AND AXC Type Quantity Polyacetal Stainless steel with seal Carbide with seal SEATS FOR ATX SPRAY GUNS Type Quantity Polyacetal Stainless steel with seal Carbide with seal SEALS FOR AIRMIX GUN SEATS Quantity Seals for stainless steel or carbide seats FILTERS supplied with 6 screen - 168μ Set-up pressure (bar) Inlet Outlet Between 2 hoses M1/2 JIC M1/2 JIC bar M1/2 JIC F1/2 JIC

103 ACCESSORIES FOR AIRMIX SPRAY GUNS Airspray spraying technologies PART NUMBERS AIRMIX Fittings Plural component Electrostatic spraying Stainless steel screen for filter Size (μ) Quantity N N N guns EXTENSIONS Lenght (cm) Straight extension Straight extension Elbow extension (45 angle) AIRLESS 101

104 EOS 15-C25 PUMP - STAINLESS STEEL AIRMIX PUMPS True accelerator of performance for your AIRMIX Xcite gun, the new paint Simplicity. The innovative design and component quality bring reliability and performance and allow for very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum. The new air motor design allows a smooth start-up under low pressure air and low air consumption. Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem. EOS pump range is available in wall-mounted versions with air control panel. FEATURES Optimization: compact Optimization: new cart and tripod design Optimization: new suction rods Easy Flow (Ø 16) Simplicity: simple design, reduced number of spare parts section coupling without tie rod construction Simplicity: differential air motor BENEFITS Lubricant protection against external pollution Full operator safety Compatible with water-based materials Steady output without any pulsation Recommended for materials up to 5000 cps Fits in small working areas Perfect stability (cart or tripod) Filtration optimized for sensible materials (recycled) Circulating for charged materials Ø 16: recommended for frequent color changes Easy maintenance output on the application output Improved sealing - easier maintenance Very simple, a few parts, minimum maintenance SPECIFICATIONS Pressure ratio 15/1 Fluid volume per cycle (cm 3 ) 25 (2 x 12.5) Number of cycles per litre of products 40 Fluid Output at 30 cycles/mn (l/mn) 0.75 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound pressure level (dba) 71.2 Sealing Packings Upper sealing Stainless steel cartridge with GT sealing Lower sealing UHMW polyethylene seal Weight (kg) (w/o support or rods) 7.6 Wetted parts hard chrome stainless steel, treated stainless steel, stainless steel Height (cm) - bare pump 58.5 Width (cm) - bare pump 15.8 Depth (cm) - bare pump 17 FITTINGS Fitting Air inlet (valve) F 3/8 BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 Fluid Outlet M 1/2 JIC 102

105 EOS 15-C25 PUMP - STAINLESS STEEL CONFIGURATION OF THE EOS 15-C25 PUMP - STAINLESS STEEL Set-up Atomization air regulator regulator Filter pump outlet AIRMIX PUMPS Wall-mounted 15-C Wall-mounted 15-C25 with suction rod Ø AIRMIX Fittings Plural component Electrostatic spraying Airspray spraying technologies STAND, CART, GRAVITY HOPPER AND RODS (SUCTION AND FLUSHING) Wall-mounted totem for EOS Stand for EOS pumps Single Post Cart for EOS pumps Gravity Hopper 6 liters C25 PUMP KITS WITH SWIVEL FITTING XCITE GUN EOS 15-C25 wall-mounted with Xcite gun kit EOS 15-C25 wall-mounted with Xcite gun kit Gun type Aircap Type Xcite 120 VX 14 Xcite 120 VX 14 Tip To be ordered separately (see table) To be ordered separately (see table) Hoses Length (m) Pump Ø AIRLESS 103

106 EOS 30-C25 PUMP - STAINLESS STEEL AIRMIX PUMPS True accelerator of performance for your AIRMIX Xcite gun, the new paint Simplicity. The innovative design and component quality bring reliability and performance and allow very simple maintenance, easy cleaning and safe color changes while using a minimum of solvents. The cost of ownership is reduced at a minimum. The new air motor design allows for a smooth start-up under low pressure air very low air consumption. Last generation paints developed for industrial markets are handle by EOS pump stainless steel construction without any problem. EOS pump range are available in wall-mounted versions with air control FEATURES Optimization: compact Optimization: new cart and tripod design Optimization: new suction rods Easy Flow (Ø 16) Easy Flush (Ø 25) Simplicity: simple design, reduced number of spare parts section coupling without tie rod construction Simplicity: differential air motor BENEFITS Lubricant protection against external pollution Full operator safety Compatible with water-based materials Steady output without any pulsation Recommended for materials up to 5000 cps Fits in small working areas Perfect stability (cart or tripod) Filtration optimized for sensible materials (recycled) Circulating for charged materials Ø 16: recommended for frequent color changers Ø 25: recommended for high viscosity products up to 5000cps Easy maintenance output on the application output Improved sealing - easier maintenance Very simple, a few parts, minimum maintenance SPECIFICATIONS Pressure ratio 30/1 Fluid volume per cycle (cm 3 ) 25 (2 x 12.5) Number of cycles per litre of products 40 Fluid Output at 30 cycles/mn (l/mn) 0.75 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound pressure level (dba) 74.9 Sealing Packings Upper sealing Stainless steel cartridge with GT sealing Lower sealing Weight (kg) (w/o support or rods) 7.6 Wetted parts Height (cm) - bare pump 58.5 Width (cm) - bare pump 15.8 Depth (cm) - bare pump 17 UHMW polyethylene seal Hard chrome stainless steel, treated stainless steel, stainless steel FITTINGS Fitting Air inlet (valve) F 3/8 BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 Fluid Outlet M 1/2 JIC 104

107 EOS 30-C25 PUMP - STAINLESS STEEL CONFIGURATION OF THE EOS 30-C25 PUMP - STAINLESS STEEL STAND, CART, GRAVITY HOPPER AND RODS (SUCTION AND FLUSHING) Set-up Atomization air regulator regulator Wall-mounted totem for EOS Stand for EOS pumps Single Post Cart for EOS pumps Gravity Hopper 6 liters Filter pump outlet AIRMIX PUMPS 30-C25 wall-mounted pump C25 wall-mounted pump with rod Ø C25 wall-mounted pump with rod Ø Ø Airspray spraying technologies AIRMIX AIRLESS 30-C25 PUMP KITS WITH XCITE GUN EOS 30-C25 wall-mounted with Xcite gun kit pump EOS 30-C25 wall-mounted with Xcite gun kit pump with rod EOS 30-C25 wall-mounted with Xcite gun kit pump Gun type Xcite 200 Aircap Type VX24 Xcite 200 VX 24 Xcite 200 VX 24 Tip To be ordered separately (see table) To be ordered separately (see table) To be ordered separately (see table) Hoses Length (m) Pump output Electrostatic spraying Fittings Plural component Ø 16 mm Ø 25 mm

108 10.25 GT PUMP - STAINLESS STEEL AIRMIX PUMPS Ideal for water-based and high solids materials FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts BENEFITS Can be used with a wide range of materials Compatible with water-based materials Easy maintenance SPECIFICATIONS Pressure ratio 10/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) 6 60 Maximum Fluid Temperature ( C) 60 Sound level (dba) 82 Sealing Packings Upper sealing GT seal cartridge Lower sealing GT seal Weight (kg) 17 Wetted parts Stainless steel Height (cm) 82 Width (cm) 35 Depth (cm) 21 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Model shown on a two-arm cart CONFIGURATION OF GT PUMPS Set-up Sealing packings Upper sealing Atomization air regulator Air regulator Pump output Wall mounted GT seals GT seal Wall mounted GT seals GT seal KITS H25 GT seal kit H25 GT repair kit air motor seal kit air motor maintenance kit CART, GRAVITY HOPPER AND RODS (SUCTION AND FLUSHING) Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate Gravity Hopper 6 liters

109 20.25 PUMP - STAINLESS STEEL Ideal for water-based and high solids materials AIRMIX PUMPS Airspray spraying technologies FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts BENEFITS Can be used with a wide range of materials Compatible with water-based materials Easy maintenance SPECIFICATIONS Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 78 Sealing Packings Upper sealing FITTINGS CONFIGURATION OF AIRMIX PUMPS Set-up sealing Lower sealing Weight (kg) 17 Wetted parts Height (cm) 83.8 Width (cm) 35.6 Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) Sealing packings Upper sealing M 1/4" NPS Fluid Inlet M 26 x 125 GT sealing Depth (cm) Stainless steel M 1/2" JIC Atomization air regulator Model shown on a two-arm cart Air regulator Pump output Wall mounted GT seal Wall mounted GT seal Wall mounted (GT seal) GT seal GT seal AIRMIX AIRLESS Electrostatic spraying KITS CART, GRAVITY HOPPER AND RODS (SUCTION AND FLUSHING) H25 GT seal kit H25 GT repair kit Seal kit for air motor Repair kit for air motor Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate Gravity Hopper 6 liters KITS FOR AIRMIX PUMPS - STAINLESS STEEL WITH XCITE - SWIVEL FITTING Wall-mounted Kit Wall-mounted GT kit Gun type Xcite 120 Xcite 120 aircap VX24 VX24 Tip To be ordered separately (see table) To be ordered separately (see table) Hoses Length (m) Pump out Plural component Fittings 107

110 20.50 PUMP - STAINLESS STEEL AIRMIX PUMPS The pump is ideal for water-based and high solids. The Turbo air motor is recommended for continued use. FEATURES Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio Stainless steel design BENEFITS Easy maintenance Can be used with a wide range of materials Compatible with water-based products SPECIFICATIONS Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 78 Sealing Packings Upper sealing Lower sealing GT Weight (kg) 22 Wetted parts Stainless steel Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC CONFIGURATION OF AIRMIX PUMPS Set-up Atomization air regulator pressure Wall mounted Wall mounted Turbo wall mounted KITS H50 GT seal kit H50 GT repair kit Seal kit for air motor Repair kit for air motor CART AND RODS (SUCTION AND FLUSHING) Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate

111 NOTES Airspray spraying technologies Fittings Plural component Electrostatic spraying AIRLESS AIRMIX 109

112 40.25 PUMP - STAINLESS STEEL AIRMIX PUMPS Ideal for outputs up to 1.5 litre/mn FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts BENEFITS Can be used with a wide range of materials Compatible with water-based products Easy maintenance SPECIFICATIONS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26x125 M 1/2" JIC CONFIGURATION OF THE PUMP -STAINLESS STEEL Set-up Wall mounted Wall mounted arms cart mounted ATOMIZATION AIR KIT WITH REGULATOR Atomization air kit with regulator (for AIRMIX spray guns)

113 40.25 PUMP - STAINLESS STEEL KITS H25 GT seal kit H25 GT repair kit Seal kit for air motor Repair kit for air motor AIRMIX PUMPS AIRMIX Electrostatic spraying Fittings Plural component Airspray spraying technologies CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate KITS FOR PUMP WITH AIRMIX XCITE SWIVEL FITTING Wall-mounted Kit Hot spraying wall-mounted Kit Gun type Xcite 200 Xcite 200 aircap VX24 VX24 Tip To be ordered separately (see table) To be ordered separately (see table) Suction Atomization air regulator Hoses Length (m) AD60 Heater Pump output Kit part number AIRLESS 111

114 40.25 WB PUMP - STAINLESS STEEL AIRMIX PUMPS Recommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn. FEATURES Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts BENEFITS For high viscosity materials Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance SPECIFICATIONS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) 1.5 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 77 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 92 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' M 1/2" JIC CONFIGURATION OF THE WB PUMP - STAINLESS STEEL Set-up Wall mounted arms cart mounted ATOMIZATION AIR KIT WITH REGULATOR Atomization air kit with regulator (for AIRMIX spray guns) KITS H25 WB seal kit Repair kit H25 WB Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION OR FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1"

115 40.50 PUMP - STAINLESS STEEL Ideal for feeding two guns. AIRMIX PUMPS Airspray spraying technologies FEATURES Simple design, reduced number of spare parts Large diameter suction rod and high compression ratio BENEFITS Easy maintenance Can be used with a wide range of materials SPECIFICATIONS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 43.2 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Lower sealing GT sealing Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 80 Width (cm) 40 Depth (cm) 28 AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26 x 125 M 1/2" JIC CONFIGURATION OF THE PUMP - STAINLESS STEEL Set-up Wall mounted Wall mounted arms cart mounted Electrostatic spraying ATOMIZATION AIR KIT WITH REGULATOR Atomization air kit with regulator (for AIRMIX spray guns) KITS H50 GT seal kit H50 GT repair kit Seal kit for air motor Repair kit for air motor Plural component CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 113

116 40.50 WB PUMP - STAINLESS STEEL AIRMIX PUMPS FEATURES Puls-Absorber device Stainless steel design Stainless steel strainer Simple design, reduced number of spare parts BENEFITS For high viscosity materials Compatible with water-based products Long service life and good reliability No crushing possible Easy maintenance SPECIFICATIONS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 60 Sound level (dba) 80 Sealing Packings Upper sealing Lower sealing GT seal Wetted parts Stainless steel Weight (kg) - wall-mounted 22 Height (cm) 92 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 1'' M 3/4" JIC CONFIGURATION OF THE WB PUMP -STAINLESS STEEL Set-up Wall mounted arms cart mounted FITTING TO CONNECT A XCITE GUN KIT Adaptator stainless steel F 3/4" JIC/M 1/2" JIC ATOMIZATION KIT Atomization air kit with regulator (for AIRMIX spray guns) KITS H50 WB seal kit H50 WB repair kit Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Suction rod 1"

117 NOTES Airspray spraying technologies Fittings Plural component Electrostatic spraying AIRLESS AIRMIX 115

118 17.A2 FLOWMAX PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. FEATURES External valves assemby Floating piston Sealing ensured by a Superlife bellow seal Stainless steel design BENEFITS Easy maintenance High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Compatible with water-based materials Fluid discharge without retention of a wide range of coating materials SPECIFICATIONS Pressure ratio 17/1 Fluid volume per cycle (cm 3 ) 60 Number of cycles per litre of products 16 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 11 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 74 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) - wall-mounted 20 Wetted parts Stainless steel Height (cm) 62.2 Width (cm) 33 Depth (cm) 21 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2 JIC CONFIGURATION OF THE FLOWMAX AIRMIX 17.A2 PUMP Set-up Atomization air regulator pressure Wall-mounted 17.A2 Flowmax pump arm cart 17.A2 Flowmax pump KITS Seal kit for external valves Seal kit for air motor Repair kit for air motor

119 17.A2 FLOWMAX PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Airspray spraying technologies CARTS AND RODS (SUCTION AND FLUSHING) Single Post Cart Two Post Cart w/o plate Two Post Pump Mounting Plate AIRMIX KITS FOR FLOWMAX AIRMIX 17.A2 PUMPS WITH XCITE SWIVEL FITTINGS Wall-mounted stainless steel 17.A2 Kit Gun type Xcite 120 Tip VX24 To be ordered separately (see table) Suction Drain Fittings Plural component Electrostatic spraying Hoses Length (m) Pump output AIRLESS 117

120 20.25F FLOWMAX PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Universal AIRMIX pump for use with all materials, including water-based and high solids. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity SPECIFICATIONS Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Fluid Output at 30 cycles/mn (l/mn) Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 10.8 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 80 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Weight (kg) - wall-mounted 22 Wetted parts Stainless steel Height (cm) 99.1 Width (cm) 48.3 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC CONFIGURATION OF THE FLOWMAX AIRMIX 20.25F - STAINLESS STEEL Set-up Atomization air regulator pressure Wall mounted arms cart-mounted KITS Seal kit H25F Repair kit H25F Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate

121 20.50F FLOWMAX PUMP - STAINLESS STEEL Universal AIRMIX pump for use with all materials, including water-based and high solids. AIRMIX FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX SPECIFICATIONS Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 6 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene Upper and lower GT Polyethylene Weight (kg) - wall-mounted 27 Wetted parts Stainless steel Height (cm) 97.5 Width (cm) 47 Depth (cm) 27 FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Inlet M 26 x 125 M 1/2" JIC Model shown: F AIRLESS Electrostatic spraying CONFIGURATION OF THE FLOWMAX AIRMIX 20.50F - STAINLESS STEEL KITS Set-up Atomization air regulator pressure Seal kit H 50F Repair kit H 50F Seal kit for air motor Repair kit for air motor Wall mounted Wall mounted Turbo Wall mounted Turbo Wall mounted Plural component CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 119

122 34.A2 FLOWMAX PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. FEATURES External valves assemby Floating piston Sealing done by a Superlife bellow seal Stainless steel design BENEFITS Easy maintenance High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials SPECIFICATIONS Pressure ratio 34/1 Fluid volume per cycle (cm 3 ) 60 Number of cycles per litre of products 16 Fluid Output at 30 cycles/mn (l/mn) 1.8 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) 71 Sealing packing Bellows Polyethylene Upper and lower GT (Polyethylene) Wetted parts Inox Weight (kg) - wall-mounted 26.5 Height (cm) 61 Width (cm) 41 Depth (cm) 25 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26 x 125 M 1/2 JIC CONFIGURATION OF THE FLOWMAX 34.A2 PUMP Set-up Wall-mounted Flowmax 34.A arm cart Flowmax 34.A ATOMIZATION AIR KIT WITH REGULATOR Atomization air kit with regulator (for AIRMIX spray guns) KITS Seal kit for external valves Seal kit for air motor Repair kit for air motor

123 34.A2 FLOWMAX PUMP - STAINLESS STEEL CARTS AND RODS (SUCTION AND FLUSHING) AIRMIX FLOWMAX PUMPS Two Post Cart w/o plate Two Post Pump Mounting Plate KITS FOR FLOWMAX 34.A2 PUMPS Wall-mounted stainless steel 34A2 Kit Gun type Xcite 200 VX24 Tip To be ordered separately (see table) Suction Atomization air regulator Hoses Length (m) Pump output Kit part number AIRMIX Fittings Plural component Electrostatic spraying Airspray spraying technologies AIRLESS 121

124 40.25F FLOWMAX PUMP - STAINLESS STEEL AIRMIX FLOWMAX PUMPS New generation Flowmax pump for low volume applications FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing - ideal for isocyanates Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity SPECIFICATIONS Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 50 Number of cycles per litre of products 20 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar 21.6 Fluid Output at 30 cycles/mn (l/mn) Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 72 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Wetted parts Stainless steel Weight (kg) - wall-mounted 37 Height (cm) 97 Width (cm) 40 Depth (cm) 28 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M1/4" NPS kit) Fluid Inlet M 26 x 125 Fluid Outlet M 1/2" JIC CONFIGURATION OF THE FLOWMAX 40.25F PUMP - STAINLESS STEEL Set-up Wall mounted Cart mounted ATOMIZATION AIR KIT Atomization air kit with regulator (for AIRMIX spray guns) KITS Kit part number Seal kit H25F Repair kit H25F Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION AND FLUSHING) Kit part number Two Post Cart w/o plate Two Post Pump Mounting Plate

125 40.50F FLOWMAX PUMP - STAINLESS STEEL New generation Flowmax pump, ideal for feeding two guns AIRMIX FLOWMAX PUMPS Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal SPECIFICATIONS BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity Pressure ratio 40/1 Fluid volume per cycle (cm 3 ) 100 Number of cycles per litre of products 10 Fluid Output at 30 cycles/mn (l/mn) 3 Air consumption (m 3 /h) at 30 cycles/mn at 4 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 77 Sealing packing Bellows Polyethylene Upper and lower GT (Polyethylene) Wetted parts Stainless steel Weight (kg) - wall-mounted 42 Height (cm) 97 Width (cm) 40 Depth (cm) 28 AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve) F 3/4" BSP Air outlet (option atomization air M 1/4" NPS kit) Fluid Inlet M 26x125 Fluid Outlet M 1/2" JIC CONFIGURATION OF THE FLOWMAX 40.50F PUMPS- STAINLESS STEEL KITS Set-up Wall mounted Wall mounted Cart-mounted (on a 2-arms cart) ATOMIZATION AIR KIT Atomization air kit with regulator (for AIRMIX spray guns) Seal kit H 50F Repair kit H 50F Seal kit for air motor Repair kit for air motor Electrostatic spraying Plural component CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 123

126 HP 60/61 HEATERS HEATERS Their original design ensures an optimized heat transfer, with no risk of burning the paint in the heater. This equipment will allow you to reduce the viscosity of paints without using solvents. temperature may be. This version of the equipment is to be used only for water-based materials. FEATURES A thermometer is integrated into the command box Modular design BENEFITS No pressure loss when working with high viscosity materials Easy maintenance SPECIFICATIONS Termostatic type Liquid dilatation and dry contact Thermal fuse Cut-out at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 250 Weight (kg) 23 Wetted parts Room temperature ( C) 40 maxi HP HEATER - STAINLESS STEEL VERSION Stainless steel heater Fitting Temperature ( C) Volt Watt plug (m) Inlet Outlet HP M 1/2 JIC M 1/2 JIC HP M 1/2 JIC M 1/2 JIC HP M 1/2 JIC M 1/2 JIC

127 AD 60/61 HEATERS NON EXPLOSIVE Original design ensuring optimum heat transfer with no risk of burning the paint in the heater. Allows to reduce paint viscisity without dilution. To be used in zone 1 and 2 according to ATEX. HEATERS Airspray spraying technologies Agreement INERIS 03ATEX 0079X II 2 G EEx d IIA T3 FEATURES A thermometer is integrated into the command box Modular design BENEFITS No pressure loss when working with high viscosity materials Easy maintenance AIRMIX SPECIFICATIONS Thermostat type Thermal fuse Cut at 121 C Thermometer Graduation C Temperature range ( C) Pressure (bar) 240 maxi Weight (kg) Aluminum: 15.5 Stainless steel: 25 Wetted parts Room temperature ( C) Aluminum: aluminum body, galvanized chrome 40 maxi Electrostatic spraying Plural component Fittings AIRLESS AD AD HEATERS - ALUMINUM VERSION (SOLVENT-BASED MATERIALS) Aluminum heater HEATERS - STAINLESS STEEL VERSIONS (SOLVENT OR WATER-BASED MATERIALS) Stainless steel heater Cable length Fitting Temperature ( C) Volt Watt Inlet Outlet Cable length Fitting Temperature ( C) Volt Watt Inlet Outlet AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC AD M 1/2 JIC M 1/2 JIC

128 ONE-PASS HEATER NON EXPLOSIVE The economical and reliable solution for a constant spraying quality to reduce the viscosity of paints without adding solvents. The heating of the product is done in one single passage in the One-pass heater thanks to the new design and the optimized thermal exchange This innovative design offers the possibility to install directly the One-pass heater directly between the pump and the gun without recirculation. Its and mounting plate) To be used in zone 1 and 2 according to ATEX HEATERS Agreement ISSeP 05ATEX031 II 2 G Ex d IIA T3 FEATURES Standard stainless steel version A thermometer is integrated into the command box Reduced dimensions Modular design t max: 20 C at an ouput of 800 cc/mn BENEFITS Compatible with water-based materials No pressure loss when working with high viscosity materials Mounting on mobile versions Quick and easy maintenance Optimised performances in most applications SPECIFICATIONS Thermostat type Thermal fuse Cut at 72 C Thermometer Graduation 0-60 C Temperature range ( C) Pressure (bar) 120 Weight (kg) 16.5 Wetted parts Stainless steel and PTFE Room temperature ( C) 40 maxi ONE PASS Stainless steel Onepass heater HEATER PART NUMBERS Cable length Fitting Temperature ( C) Volt Watt Inlet Outlet One-pass 230V M 1/2 JIC M 1/2 JIC One-pass 115V M 1/2 JIC M 1/2 JIC

129 ACCESSORIES FOR HOT CIRCULATION Airspray spraying technologies Allowing paint circulation on the gun while maintaining ease of use. Remote set-up possible using an additional hose. Y-FITTING PART NUMBERS Fittings on gun guns F 1/2" JIC M 1/2" JIC materials) AIRMIX Electrostatic spraying Fittings Plural component Allows you to set the perfect output for circulation. CIRCULATION VALVES PART NUMBERS (NON STAINLESS STEELS) Pump intake x 125 F M M 1/2 JIC M 1'' G M M 3/4 JIC AIRLESS Airmix back pressure regulator Regulation pressure: 0-70 bar. AIRMIX BACK PRESSURE REGULATOR PART NUMBERS Version Pump intake x 125 Wall-mounted F 26 x 125 M 26 x 125 M 1/2 JIC

130 CTM COLOR CHANGE VALVES CIRCULATINGS AIRMIX At the same time, you will reduce costs through less down time and lower solvent consumption. Two valves per module PTFE seals Modulable design allows for expansion Paint circulation through the valve Opening index as standard CTM VALVE SPECIFICATIONS Designation AIRMIX Max pressure (bar) Ø of passage (mm) 6 Trigger air for hose 2.7 x 4 Fluid inlet F 1/4 NPS Fluid outlet F 1/4 NPS ACCESSORIES Airmix Assembly module rods comes with outlet module: End module (inlet) bar Intermediate module bar End module (inlet) bar Intermediate module bar

131 STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use. CIRCULATINGS AIRMIX Airspray spraying technologies FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts FEATURES Pressure ratio 8/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 30 CPM at 5 bar 20.4 Maximum air inlet pressure (bar) 6 48 Maximum Fluid Temperature ( C) 60 Balanced acoustic pressure (dba) 76 Sealing Packings Upper sealing Lower sealing Weight (kg) - wall-mounted 27 Wetted parts BENEFITS Can be used with a wide range of materials Compatible with water-based materials Easy maintenance PEHD Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 25.4 Stainless steel AIRMIX AIRLESS FITTINGS Fitting Air inlet (valve air equipment) F 3/4 BSP KITS Fluid Inlet M 26 x 125 CONFIGURATION OF THE AIRMIX Set-up M 1/2 JIC Atomization air regulator pressure Seal kit H Repair kit H Seal kit for air motor Repair kit for air motor Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted Electrostatic spraying Plural component CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 129

132 PUMP - STAINLESS STEEL CIRCULATINGS AIRMIX For circulating and large production. The Turbo air motor is recommended for continued use. FEATURES Large diameter suction rod and high compression ratio Stainless steel design Simple design, reduced number of spare parts BENEFITS Can be used with a wide range of materials Compatible with water-based materials Easy maintenance SPECIFICATIONS Pressure ratio 16/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 30 CPM at 5 bar 41.5 Maximum air inlet pressure (bar) 6 96 Maximum Fluid Temperature ( C) 60 Sound level (dba) 76 Sealing Packings Upper sealing Lower sealing PEHD Weight (kg) - wall-mounted 27 Wetted parts Stainless steel Height (cm) 86.4 Width (cm) 35.6 Depth (cm) 25.4 FITTINGS Fitting Air inlet (valve air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 M 1/2 JIC CONFIGURATION OF THE AIRMIX PUMP Set-up Atomization air regulator pressure Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted KITS Seal kit H Repair kit H Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION AND DRAIN) Two Post Cart w/o plate Two Post Pump Mounting Plate

133 PUMP - STAINLESS STEEL For circulating and large production. The Turbo air motor is recommended for continued use. CIRCULATINGS AIRMIX Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX FEATURES Pressure ratio 08/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 20.4 Maximum air inlet pressure (bar) 6 48 Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene FITTINGS Upper and lower Weight (kg) - wall-mounted 32 Wetted parts Height (cm) 105 Width (cm) 40 Depth (cm) 27 Fitting Air inlet (valve air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 CONFIGURATION OF THE FLOWMAX AIRMIX Set-up GT Polyethylene Stainless steel M 1/2 JIC Atomization air regulator pressure Bare Wall mounted Wall mounted Cart mounted Turbo wall-mounted Turbo wall-mounted KITS Seal kit H120F Repair kit H120F Seal kit for air motor Repair kit for air motor AIRLESS Electrostatic spraying Plural component CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate Fittings 131

134 16.120F FLOWMAX PUMP - STAINLESS STEEL CIRCULATINGS AIRMIX For circulating and large production. The Turbo air motor is recommended for continued use. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity SPECIFICATIONS Pressure ratio 16/1 Fluid volume per cycle (cm 3 ) 240 Number of cycles per litre of products 4 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 41.5 Maximum air inlet pressure (bar) 6 96 Maximum Fluid Temperature ( C) 50 Sound level (dba) 76 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) 32 Wetted parts Stainless steel Height (cm) 105 Width (cm) 40 Depth (cm) 27 FITTINGS Fitting Air inlet (air equipment) F 3/4 BSP Fluid Inlet M 26 x 125 M 1/2 JIC CONFIGURATION OF THE FLOWMAX AIRMIX F PUMP - STAINLESS STEEL Set-up Atomization air regulator pressure Bare pump Wall mounted Wall mounted Cart-mounted Turbo wall-mounted Turbo wall-mounted KITS Seal kit H120F Repair kit H120F Seal kit for air motor Repair kit for air motor CARTS AND RODS (SUCTION AND FLUSHING) Two Post Cart w/o plate Two Post Pump Mounting Plate

135 PUMP - STAINLESS STEEL High output,cartridge free bellow pump for circulating and automatic machines. CIRCULATINGS AIRMIX Airspray spraying technologies FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity AIRMIX SPECIFICATIONS Pressure ratio 8/1 Fluid volume per cycle (cm 3 ) 440 Number of cycles per litre of products 2.3 Fluid Output at 20 Cycles/mn (l/mn) Air 20 CPM at 5 bar Maximum Fluid Temperature ( C) 50 Maximum air inlet pressure (bar) 6 Sound level (dba) 76 Sealing packing Bellows Polyethylene Wetted parts Upper and lower Weight (kg) 54 Height (cm) 110 Width (cm) 40 Depth (cm) 27 GT ployethylene Stainless steel, hard-chrome stainless steel, carbide AIRLESS Electrostatic spraying FITTINGS Fitting Air Inlet F 3/4" BSP Fluid Inlet F 3/4" BSP Fluid Outlet F 3/4" BSP Set-up Wall mounted Plural component CART, FILTER AND ROD (SUCTION AND FLUSHING) Two Reinforced Arms w/o mounting plate Pump bracket Suction rod Ø25 plunging tube length 600 mm Fittings 133

136 20.220F FLOWMAX PUMP - STAINLESS STEEL CIRCULATINGS AIRMIX High output, cartridge free bellow pump for circulating and automatic machines. FEATURES Sealing done by one large stroke bellow Stainless steel design Mobile piston seal BENEFITS High reliability No more lubricant cups Leak free Total sealing between pump and its environment, ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Fluid discharge without retention of a wide range of coating materials Compatible with water-based materials Excellent suction capacity SPECIFICATIONS Pressure ratio 20/1 Fluid volume per cycle (cm 3 ) 440 Number of cycles per litre of products 2.3 Fluid Output at 30 cycles/mn (l/mn) Air 20 CPM at 5 bar 63.4 Maximum air inlet pressure (bar) Maximum Fluid Temperature ( C) 50 Sound level (dba) < 82 Sealing packing Bellows Polyethylene Upper and lower GT polyethylene Weight (kg) 66 Wetted parts Stainless steel, carbide, hard chromed stainless steel Height (cm) Width (cm) 64 Depth (cm) 32.5 FITTINGS Fitting Air inlet (valve) F 3/4" BSP Fluid Inlet F 1" BSP Fluid Outlet F 3/4 NPS CONFIGURATION OF THE F PUMP - STAINLESS STEEL Set-up pressure Atomization air regulator Filter Wall-mounted CART, FILTER AND RODS (SUCTION AND FLUSHING) Two Reinforced Arms w/o mounting plate Pump bracket Suction rod Ø25 plunging tube length 600 mm

137 PRESSURE REGULATORS Pressure regulator - manual control - AIRMIX AIRMIX CHARACTERISTICS Pressure range (bar) Inlet 250 max Outlet (upon version) 10-70; Weight (kg) 3.6 Width (cm) 8.9 Height (cm) 20 Wetted parts Stainless steel, PTFE, carbide Airspray spraying technologies AIRMIX FITTINGS Fitting Fluid Inlet F 3/8" NPS Fluid Outlet F 3/8" NPS CONFIGURATION Manual regulator / 70 bar Manual regulator / 120 bar Manual regulator PH / 120 bar Options: Wall bracket AIRLESS AIRMIX features an increased regulation accuracy and a remote control. SPECIFICATIONS Pressure range (bar) Inlet (upon version): 120 max (version 5-40) or 250 max (versions and ) Outlet (upon version): 05-40; 10-70; Weight (kg) (max: version) 4.1 (max: version ) Width (cm) - w/o pilot 8.9 Height (cm) - (max: version) 27.5 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 3/8" NPS CONFIGURATION OF PILOTED REGULATOR WITH/WITHOUT PILOT CONFIGURATION OF CARTRIDGE PILOTED REGULATORS WITHOUT PILOT Fluid Outlet Air Inlet (pilotage) F 3/8" NPS F 1/4" BSP Piloted regulator with pilot120-5/40 bar Piloted regulator with pilot / 70 bar Piloted regulator with pilot / 120 bar Piloted regulator without pilot / 40 bar Piloted regulator without pilot / 70 bar Piloted regulator without pilot / 120 bar Cartridge piloted regulator / Cartridge piloted regulator / Cartridge piloted regulator / Electrostatic spraying Plural component Fittings 135

138 PRESSURE REGULATORS ACCESSOIRES Wall bracket Pressure regulator - back - AIRMIX SPECIFICATIONS Pressure range (bar) Inlet 120 max Regulated outlet Weight (kg) 3.6 Width (cm) 8.9 Height (cm) 20 Wetted parts Stainless steel, PTFE, carbide FITTINGS Fitting Fluid Inlet F 3/8" NPS Fluid Outlet F 3/8" NPS CONFIGURATION Set-up Fitting (suction) Manual regulator / Manual regulator / 120 Equipped for wall-mounting, supplied 26 x Wall bracket High pressure gauges Metal pressure gauge with glass and glycerin lens; totally impact and solvent resistant. HIGH PRESSURE GAUGES Pressure range (bar) Fitting (mm) Diaphragm high pressure gauge M 3/8" NPS - F 3/8" NPS Pressure gauge side inlet M 1/4 G Pressure gauge side inlet M 1/4 G

139 FILTRATION Filter 240 bar EQUIPPED FILTER ACCESSORIES FOR FILTERS Maximum (bar) Stainless steel screen Inlet Outlet Drain F 3/8" NPT F 3/8" NPT F 1/4" NPT Embase (x1) F 3/8" NPT M 1/2" JIC M 18x F 3/8" NPT M 1/2" JIC M 18x for EOS F 3/8" NPT M 1/2" JIC M 18x Airspray spraying technologies AIRMIX avoids all unnecessary line down time due to blockages. FILTER CONFIGURATION Maximum (bar) Stainless steel screen output (l/mn) Inlet Outlet F 1/4 NPS F 1/4 NPS (1) AIRLESS STRAINERS CONFIGURATION Height Filtration size Pump Material (mm) (mm) Micron Mesh Polyamide EOS 15-C25/EOS30-C25 (Ø16) EOS 30.C /17. A2/20.25/20.25F/34.A2/40.25/40.25F/08.120/ F/16.120/16.120F (Ø25) SCREEN CONFIGURATION (FILTRATION SURFACE 65 CM2) Filter number /40.50WB / F2 / / F2 Micron Filtration size Mesh Stainless steel Stainless steel Stainless steel Polyamide Nozzle size & & Electrostatic spraying Plural component Fittings 137

140 CYCLIX AGITATORS FOR L DRUMS AGITATORS This elevator-agitator for to 200l drums features a double-effect jack for materials and a full stainless steel rod. easy to install in paint kitchens, existing installations or an essential component of new installations. FEATURES Stainless steel (agitator cover, suction and drain rods) Suction and return tubes up, stop, down The agitator cannot work during elevator movements BENEFITS Compatibility with all materials No product loss Suitable for recirculating Security CHARACTERISTICS Capacity (L) Motor type Pneumatic Pneumatic Reductor type - Gear train Rotation speed (rpm) Motor torque Nm CYCLIX PART NUMBERS FOR L DRUMS Elevator for l drums 1024 (min) (max) Agitator for l drums Cover for l drums Suction/exhaust kit CYCLIX PART NUMBERS FOR 200 L DRUMS Elevator for 200 l drums 1510 (mini) (maxi) Agitator for 200 l drums Cover for 200 l drums Suction/exhaust kit RECOMMENDED ACCESSORIES Exhaust assembly with oil recovery (length 1 m) Air feeding kit Drum roller unit for 200 litres drum Slotted paddle for thick materials

141 AGITATORS Airspray spraying technologies Agitator for barrel edge mounting. Minimum barrell height of 300 mm AGITATORS Bare agitator Agitator with 25 cm hose Agitator with 5 m hose System for barrel mounting AIRMIX Fittings Plural component Electrostatic spraying Stainless steel Agitator: For drums diameter between 295 and 325 mm Minimum drum height of 390 mm AGITATORS Stainless steel agitator for Ø325 cover AIRLESS 139

142 HOSES spraying The hoses should be chosen according to the pressure used in the application and electrical conductibility HOSES CONFIGURATION Designation NO YES Color GREY BLUE Internal diameter mm 3.2 (1/8'') 4.8 (3/16'') 6.35 (1/4'') 3.2 (1/8'') 4.8 (3/16'') 6.35 (1/4'') Max.operating pressure bar Temperature up to 100 C 25 m m m Fitting alone to crimp Fitting alone to screw in Fitting alone stainless steel to crimp Fitting alone stainless steel to screw in PART NUMBER ACCORDING TO LENGTH WITH FITTINGS per meter (free nut) 1/2 JIC With spring Without spring Without spring With spring Without spring 0.4 m m m m m m m m m m m m m Stainless Steel Fittings 0.6 m m m m m HOSE FOR SUCTION ROD Designation Ø 9.5 mm Ø 19 mm Ø 25 mm 5 m cut m cut m cut wing collar

143 HOSES Nitrile air hoses Airspray spraying technologies To use so that the equipment (gun and pump) have the same potential HOSES CONFIGURATION Designation Material Nitrile Nitrile Nitrile Nitrile Color Black Black Black Black Internal diameter (mm) Conductor yes yes yes yes Color Gold Green White Blue Maximum pressure bar Collar SK Fitting A and B 1/4" NPS 3/8" NPS 26 x m m m m m m m m m m m m AIRMIX AIRLESS Electrostatic spraying HOSES CONFIGURATION Designation Material Polyurethan Color translucent black blue black Internal diameter (mm) 2.7 x 4 4 x 6 6 x 8 6 x 8 8 x 10 4 x 6 6 x 8 8 x 12 Conductive Maximum operating pressure bar 10 Temperature up to 60 C 25 m non Plural component PART NUMBERS Length (m) Hoses Sleeve Fittings 141

144 MISCELLANEOUS LUBRICANT FOR PUMP PACKINGS Lubricants for pump fittings T lubricant (1/4 l) can for solvent-based paints Kit of 3 T lubricant cans (2L each) Kit of 3 P lubricant cans (2L each) Grease Vaseline 1 kg "special PMP" Box of 450 g PTFE grease Techni Lub tube Box of grease (450g) Miscellaneous PART NUMBERS M22/Xcite gun wrench Large size brush Small size brush Large blow gun Viscosity cup N 4 CA Thickness gauge from 25 to 2000μ Adhesive-roller with KREMLIN REXSON logo (75mm x 100m)

145 RC 500 FULL VISOR MASK Maximum protection for excellent working conditions, optimal health protection with low operating costs. The RC 500 is compliant with the latest european norms (EN14594, EN 166) PROTECTION Airspray spraying technologies FEATURES Complete assembly with protection screen Light and ergonomic BENEFITS Complete protection of the operator face and eyes (against isocyanates especially) Reliable operator health protection against all type of paints, dust... Reduced fatigue and excellent working conditions for increased productivity Constant operator protection RC500 complete assembly AIRMIX Suitable for everyone and user-friendly Electrostatic spraying Fittings Plural component Easy disposable screen protectors Easy maintenance SPECIFICATIONS Operating pressure (bar) Maximum temperature ( C) 35 CONFIGURATION OF THE RC 500 FULL-VISOR MASK RC 500 full-visor mask complete (without network 10m air hose) General supply air hose (compliant - length 10m) AIRLESS ACCESSORIES Quantity Screen protector Mask/belt air hose

146 RC 756 RESPIRATORS PROTECTION compliant with the latest european norms (Respirator: EN 140, Filters: EN 14393) FEATURES Respirator body made of silicone Equipped with large inlet and outlet valves (solvented, water-based or multi with isocyante materials) BENEFITS Hypoallergenic and high comfort Easy breathing Comfortable Performance (large diameter), visibility and high level of safety For an optimal protection whatever the type of paint used CONFIGURATION OF THE RC 756 RESPIRATOR RC 756 respirator FILTERS & PRE-FILTERS Type Quantity Filters for solvented paints A Filters for water-based paints A1B1P Filters for plural-components-isocyanates A1B1E1K1P ACCESSORIES Quantity Attach strap Spare inlet/outlet valves

147 ACCESSORIES FOR PROTECTION Airspray spraying technologies Protects the operator. Comfortable to wear, giving protection for dust or plush. Conforms to European Standards Made in non-woven fabric, they come with elasticated wrists and wide trouser legs to protect footwear PART NUMBERS Taille Quantity Overalls Size S for 5 sets S Overalls Size M for 5 sets M Overalls Size L for 5 sets L Overalls Size XL for 5 sets XL Overalls Size XXL for 5 sets XXL AIRMIX Protects the head and hair Non-woven, light and lets the skin breathe Conforms to European Standards Electrostatic spraying Fittings Plural component AIRLESS PART NUMBERS Quantity Protective hood

148 146 NOTES

149 AIRLESS SPRAYING

150 M250 AIRLESS AIRLESS SPRAY GUNS Recommended for quality AIRLESS industrial applications FEATURES Ergonomic design BENEFITS SPECIFICATIONS Sprayed materials Corrosion-resistant products, primers, Body of the gun Aluminum Wetted parts Aluminum Needle 540 Seat CONFIGURATION OF THE M250 SPRAY GUNS Gun type Tip M SEAL KITS KITS FOR AIRLESS M250 SPRAY GUNS M250 gun 148

151 AIRLESS SPRAY GUNS ACCESSORIES Allows for extremely rapid cleaning, without the need for any tool Manually removable (or conventional key lock system); very easy to use, it is also completely leak free Tip can be set in three possible positions: spraying, unplugging or removing. TIP GUARDS FOR REVERSIBLE TIPS TIP KIT Manual Quantity 8 REPAIR KIT To determine the part number of a tip, use the number engraved on the tip to replace the crosses in following part number: XXX. REVERSIBLE TIPS Output at grey red orange green red engraved on the tip engraved on the tip engraved on the tip engraved on the tip engraved on the tip engraved on the tip engraved on the tip engraved on the tip engraved on the tip TIP GUARDS FOR FLAT TIPS - TIP KIT Quantity AIRMIX AIRLESS 149

152 AIRLESS SPRAY GUNS ACCESSORIES Flat tips ensure high precision and performance; The choice of the tip must be done according : XX.XX (replace of the X by the number read on the table) FLAT TIPS Size Tip red red engraved on the tip Conical tips for direct mounting an manual and automatic guns CONICAL TIPS Adjustable fan tips provide a simultaneous adjustment of fan width and output

153 AIRLESS SPRAY GUNS ACCESSORIES EXTENSIONS FOR AIRLESS SPRAY GUNS AND HANDLES (1) See table page 145 EXTENSION SEALS Quantity AIRMIX SWIVEL FITTINGS red AIRLESS UNPLUGGING NEEDLES FOR FLAT TIPS Tip Quantity 151

154 AIRLESS ASI 24 AND 40 AUTOMATIC AIRLESS SPRAY GUNS High output FEATURES BENEFITS faster color changes and less maintenance SPECIFICATIONS 50 Body of the gun Stainless steel Wetted parts Seat FITTINGS Control air PART NUMBERS (1)to be ordered separately in the table of tips REPAIR KIT 152

155 AIRLESS ASI 40 GT SPRAY High reliability AIRLESS gun for high productivity: KREMLIN unique design for very abrasive UV and HS materials. AIRLESS spraying for reduced overspray High power preventing any needle blockage AUTOMATIC AIRLESS SPRAY GUNS FEATURES BENEFITS Very easy to service AIRMIX viscosity material applications SPECIFICATIONS Body of the gun Stainless steel Wetted parts Seat AIRLESS FITTINGS Control air PART NUMBERS REPAIR KIT

156 AUTOMATIC AIRLESS SPRAY GUNS ACCESSORIES Diaphragm has to be chosen depending on nozzle diameter. it increases atomization quality. PART NUMBERS Diaphragm Diaphragm 25 Diaphragm 60 - standart mounting - 154

157 STAINLESS STEEL Very compact gun with possibility of circulation AUTOMATIC AIRLESS SPRAY GUNS FEATURES Miniature size BENEFITS AIRMIX SPECIFICATIONS Body of the gun Aluminium Wetted parts Stainless steel Seat AIRLESS FITTINGS Control air CONFIGURATION OF THE AS2 AIRLESS GUN tips 155

158 AIRLESS GUNS AUTOMATIC AIRLESS SPRAY GUNS AIRLESS spraying for reduced overspray: can also be used as shutdown valve on a high pressure network FEATURES BENEFITS viscosity material applications SPECIFICATIONS Body of the gun Aluminium Wetted parts Stell or Stainless steel Seat FITTINGS Control air Mounting support PART NUMBERS GUNS FOR AIRLESS STAINLESS STEEL AND NON STAINLESS STEEL REPAIR KIT ADAPTATION PART 156

159 AUTOMATIC AIRLESS SPRAY GUNS ACCESSORIES Diaphragm has to be chosen depending on nozzle diameter. it increases atomization quality. AIRMIX FILTRATION SCREEN AIRLESS 157

160 AUTOMATIC AIRLESS SPRAY GUNS ACCESSORIES Flat tips ensure high precision and performance; The choice of the tip must be done according : XX.XX (replace of the X by the number read on the table) FLAT TIPS Size Tip red red engraved on the tip Conical tips for direct mounting an manual and automatic guns CONICAL TIPS Adjustable fan tips provide a simultaneous adjustment of fan width and output. ADJUSTABLE FAN TIPS

161 STAINLESS STEEL Ideal for outputs up to 1.5 litre/mn AIRLESS PUMPS FEATURES ratio Stainless steel design SPECIFICATIONS Wetted parts BENEFITS Easy maintenance Stainless steel AIRMIX AIRLESS FITTINGS Wall mounted - - Wall mounted 2 arms cart mounted KITS KITS FOR PUMP WITH M250 GUN Wallmounted Gun type M Tip AD60 Pump

162 STAINLESS STEEL AIRLESS PUMPS paints. Ideal for outputs up to 1.5 litre/mn. FEATURES Stainless steel design Stainless steel strainer BENEFITS Easy maintenance SPECIFICATIONS Wetted parts Stainless steel FITTINGS Wall mounted 2 arms cart mounted KITS 160

163 STAINLESS STEEL Ideal for feeding two guns AIRLESS PUMPS FEATURES ratio SPECIFICATIONS FITTINGS Wetted parts BENEFITS Easy maintenance Stainless steel AIRMIX AIRLESS Wall mounted - - Wall mounted 2 arms cart mounted KITS 161

164 STAINLESS STEEL AIRLESS PUMPS paints. Ideal for outputs up to 1.5 litre/mn. FEATURES Stainless steel design Stainless steel strainer BENEFITS Easy maintenance SPECIFICATIONS Wetted parts Stainless steel FITTINGS Wall mounted 2 arms cart mounted FITTING TO CONNECT AN AIRLESS GUN KIT KITS 162

165 STAINLESS STEEL AIRLESS PUMPS FEATURES Stainless steel design Rugged design BENEFITS Well-suited for anti-corrosion materials to reach places AIRMIX SPECIFICATIONS FITTINGS Air Inlet Wetted parts chromed stainless steel 64 AIRLESS Wall mounted Wall mounted Cart-mounted KITS

166 STAINLESS STEEL AIRLESS PUMPS AIRLESS unit especially designed for industrial coating applications. Ideal for feeding two guns FEATURES Cart-mounted pump Rugged design Stainless steel design ratio BENEFITS Adapted for construction sites Easy maintenance SPECIFICATIONS Wetted parts Stainless steel 90 FITTINGS CONFIGURATION PUMP Cart-mounted REPAIR KITS 164

167 STAINLESS STEEL AIRLESS PUMPS FEATURES Stainless steel design Rugged design BENEFITS for anti-corrosion materials to reach places AIRMIX SPECIFICATIONS FITTINGS Air Inlet Wetted parts AIRLESS Wall mounted - Cart-mounted - KITS 165

168 STAINLESS STEEL AIRLESS PUMPS AIRLESS unit especially designed for industrial coating applications. Ideal for feeding two guns FEATURES Cart-mounted pump Rugged design Stainless steel design ratio BENEFITS Adapted for construction sites Easy maintenance SPECIFICATIONS Wetted parts Stainless steel FITTINGS Cart-mounted REPAIR KITS 166

169 34.A2 FLOWMAX STAINLESS STEEL Unique design with external valves for an easy maintenance. Flowmax technology ensures total sealing. Quick inversion of this pump allows for a perfectly stable fan shape at the gun. Performance, extended lifetime, reliability. AIRLESS FLOWMAX PUMPS FEATURES Stainless steel design BENEFITS Easy maintenance coating materials AIRMIX SPECIFICATIONS Wetted parts Stainless steel 25 FITTINGS CONFIGURATION OF THE FLOWMAX 34.A2 PUMP AIRLESS KITS KITS FOR FLOWMAX 34.A2 PUMPS Wall-mounted Gun type M Tip Pump - 167

170 STAINLESS STEEL AIRLESS FLOWMAX PUMPS New generation Flowmax pump for low volume applications FEATURES Stainless steel design BENEFITS coating materials SPECIFICATIONS Wetted parts Stainless steel FITTINGS CONFIGURATION OF THE FLOWMAX Wall mounted Cart-mounted KITS 168

171 40.50F FLOWMAX STAINLESS STEEL New generation Flowmax pump, ideal for feeding two guns AIRLESS FLOWMAX PUMPS FEATURES Stainless steel design BENEFITS coating materials AIRMIX SPECIFICATIONS Wetted parts Stainless steel FITTINGS AIRLESS KITS Wall mounted - - Wall mounted 169

172 STAINLESS STEEL AIRLESS FLOWMAX PUMPS FEATURES Stainless steel design BENEFITS coating materials SPECIFICATIONS Wetted parts chromed stainless steel 65 FITTINGS Air Inlet Wall mounted Wall mounted - Cart-mounted - KITS 170

173 65.130F2 FLOWMAX STAINLESS STEEL AIRLESS FLOWMAX PUMPS FEATURES Stainless steel design BENEFITS coating materials AIRMIX SPECIFICATIONS FITTINGS Air Inlet Wetted parts chromed stainless steel AIRLESS Wall mounted - Cart-mounted - KITS 171

174 AIRLESS FLOWMAX PUMPS ACCESSORIES CONFIGURATION OF STEEL FILTERS CONFIGURATION OF STAINLESS STEEL FILTERS Stainless steel Accumulator Stainless steel equipped Maximum FILTER ACCESSORIES

175 AIRLESS FLOWMAX PUMPS ACCESSORIES > > 68 AIRMIX 2 Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel > > 68 AIRLESS STRAINERS CONFIGURATION Pump Stainless steel Stainless steel

176 CYCLIX AGITATORS FOR AGITATORS materials and a full stainless steel rod. easy to install in paint kitchens, existing installations or an essential component of new installations. FEATURES BENEFITS No product loss Security CHARACTERISTICS Motor type Reductor type Motor torque Nm Elevator for l drums Agitator for l drums Cover for l drums CYCLIX PART NUMBERS FOR 200 L DRUMS Elevator for 200 l drums Agitator for 200 l drums Cover for 200 l drums RECOMMENDED ACCESSORIES Drum roller unit for 200 litres drum 174

177 AGITATORS Agitator for barrel edge mounting. AGITATORS Bare agitator AIRMIX Stainless steel Agitator: AGITATORS AIRLESS 175

178 HOSES Those hoses should be chosen according to the diameter, the length and the pressure used in the application HOSES CONFIGURATION SINGLE BRAIDED HOSE YES Internal diameter m 5 m 6 m 8 m HOSES CONFIGURATION DOUBLE BRAIDED HOSE YES Internal diameter PART NUMBER ACCORDING TO LENGTH WITH FITTINGS PER METER 2 m 5 m 6 m 8 m 20 m 176

179 HOSES For all products, particularly those which are sensitive to air humidity (like silicone) and those which are chemically aggressive. HOSES CONFIGURATION Material color Conductive m m YES AIRMIX AIRLESS HOSE FOR SUCTION ROD Ø 9.5 mm Ø 19 mm Ø 25 mm 5 m cut - 25 m cut LUBRICANT FOR PUMP PACKINGS 177

180 RC 500 FULL VISOR MASK PROTECTION Maximum protection for excellent working conditions, optimal health protection with low operating costs. The RC 500 is compliant with the latest european norms (EN14594, EN 166) FEATURES BENEFITS Complete protection of the operator face and eyes increased productivity Constant operator protection Easy maintenance SPECIFICATIONS RC500 complete assembly ACCESSORIES Quantity Screen protector 2 178

181 RC 756 RESPIRATORS compliant with the latest european norms (Respirator: EN 140, Filters: EN PROTECTION FEATURES BENEFITS Hypoallergenic and high comfort AIRMIX of safety used CONFIGURATION OF THE RC 756 RESPIRATOR AIRLESS Type Quantity ACCESSOIRES Quantity Attach strap 179

182 ACCESSORIES FOR PROTECTION Protects the operator. Comfortable to wear, giving protection for dust or plush. Conforms to European Standards Made in non-woven fabric, they come with elasticated wrists and wide trouser legs to protect footwear PART NUMBERS Quantity Overalls Size S for 5 sets S 5 Overalls Size M for 5 sets M Protects the head and hair Non-woven, light and lets the skin breathe Conforms to European Standards PART NUMBERS Quantity 5 180

183 ELECTROSTATIC SPRAYING

184 KMV 3 SPRAY GUN MANUAL ELECTROSTATIC GUNS Perfect for complex tubular parts such as tubes, frameworks, chassis, tables. Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0.24 mj To be used in zone 1 FEATURES Built-in HT generator BENEFITS viscosity lower than 5 Mohms.cm SPECIFICATIONS Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) max 20 Total Length (cm) 285 mm 40 s CA4 maxi Probe voltage kv Maximum current 100 μa Maximum temperature ( C) 60 - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KMV KMV 3 SPRAY GUN CONFIGURATION Nozzle Fan shape Aircap Caliber (mm) Voltage cable length (m) gun 10 gun 15 KMV3 GUN KITS Resistivity range Hoses Length (m) Kit with power supply part number Kit part number w/o power supply kit Higher than 5 M.cm kit Higher than 5 M.cm low resistivity Lower than 5 M.cm 10 - FITTING TO CONNECT WITH AIRSPRAY PUMPS (PMP 150/02.75) KMV3 REPAIR KIT 182

185 MANUAL ELECTROSTATIC GUNS Aircaps, tips, needles for KMV3 Airspray spraying technologies TIPS. AIRCAPS AND NEEDLES FOR AUTOMATIC GUNS AIRMIX Fittings and air treatment Plural component pumps and machines AIRLESS Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) Fluid output 16 Nm /h at 4 bar /mn at 1.5 bar AIRCAP RINGS Electrostatic spraying and equipment 183

186 KMP 3 SPRAY GUN MANUAL ELECTROSTATIC GUNS equipment, accessories... Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Built-in HT generator SPECIFICATIONS Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 FITTINGS BENEFITS viscosity lower than 5 Mohms.cm 1 max 285 mm 40 s CA4 maxi kv 100 μa - Polyethylene Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KP3 KMP 3 SPRAY GUN CONFIGURATION Fan shape Aircap Tip Size (mm) Voltage cable length (m) spray gun Flat spray gun Flat KMP3 GUN KIT Resistivity range Hoses Length (m) Kit part number w/o power supply Higher than 5 M.m Higher than 5 M.m low resistivity Lower than 5 M.m 10 Kit with power supply part number FITTING TO CONNECT WITH AIRSPRAY PUMPS (PMP 150/02.75) KMP3 REPAIR KIT 184

187 MANUAL ELECTROSTATIC GUNS Aircaps, tips, needles for KMP3 AIRMIX Fittings and air treatment Plural component pumps and machines Airspray spraying technologies AIRLESS TIPS, AIRCAPS AND NEEDLES FOR AUTOMATIC GUNS Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) Fluid output 24 N m /h at 4 bar 600 cm /mn at 4 bar 24 N m /h at 4 bar 800 cm /mn at 4 bar AIRCAP RINGS Electrostatic spraying and equipment 185

188 KMX 3 SPRAY GUN MANUAL ELECTROSTATIC GUNS Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Built-in HT generator BENEFITS viscosity lower than 5 Mohms.cm SPECIFICATIONS Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 800 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Upon tip 285 mm 40 s CA4 maxi kv 100 μa Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity< 5Mohms.cm) F 1/2" JIC AIRCAP KX 16 KMX 3 GUN CONFIGURATION Tip Fan shape Aircap Size (mm) Voltage cable length (m) spray gun Flat 10 spray gun Flat 15 KMX3 KITS Resistivity range Hoses Length (m) Kit part number w/o power supply Kit with power supply part number Higher than 5 M.com 10 Higher than 5 M.cm 15 low resistivity Lower than 5 M.cm 10 - KMX3 REPAIR KIT 186

189 MANUAL ELECTROSTATIC GUNS Aircaps, tips, needles for KMX3 Fittings and air treatment Airspray spraying technologies AIRMIX Plural component pumps and machines AIRLESS AIRCAPS, TIPS, NEEDLE Gun type Aircap w/o ring Tips Needle for manual guns Type 5 Nm /h at 2 bar tips 8 Nm /h at 2 bar AIRCAP RING Electrostatic spraying and equipment 187

190 MANUAL ELECTROSTATIC GUNS Special tips with dielectric insert SPECIAL TIPS Size (1) Water output in l/mn Ø equivalent (mm) Screen mark Avarage width of fan at 25 cm 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number the tip number the tip number the tip number the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx 188

191 NOTES Airspray spraying technologies Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX 189

192 KMC 3 SPRAY GUNS MANUAL ELECTROSTATIC GUNS Ideal for complex parts such as tubes, frameworks, chassis and tables... Compliant with ATEX Directive: INERIS 03 ATEX 0026X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES Built-in HT generator BENEFITS viscosity lower than 5 Mohms.cm SPECIFICATIONS Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 800 Flow rate (l/mn) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Upon tip 285 mm 40 s CA4 maxi kv 100 μa Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS Fitting (resistivity > 5Mohms.cm) M 1/2" JIC Fitting (resistivity < 5Mohms.cm) F 1/2" JIC AIRCAP KXC 5 KMC 3 H20 GUN Tip Fan shape Aircap Size (mm) Voltage cable length (m) spray gun 10 spray gun 15 KMC 3 GUN KIT Resistivity range Hoses Length (m) Kit part number w/o power supply Kit with power supply part number kit Higher than 5 M.cm 10 kit Higher than 5 M.cm 15 KMC3 REPAIR KIT 190

193 MANUAL ELECTROSTATIC GUNS Aircaps, tips, needles for KMC3 AIRCAPS, TIPS, NEEDLES AND MAINTENANCE KITS FOR KMC 3 Gun type Aircap Tip Needle for KAC type Air output Size (mm) Fluid output 8 Nm /h at 2 bar 200 cm /mn 8 Nm /h at 2 bar /mn 8 Nm /h at 2 bar 400 cm /mn 8 Nm /h at 2 bar 500 cm /mn 8 Nm /h at 2 bar 600 cm /mn 8 Nm /h at 2 bar /mn AIRMIX Fittings and air treatment Plural component pumps and machines AIRLESS Airspray spraying technologies Electrostatic spraying and equipment 191

194 MANUAL ELECTROSTATIC GUNS STD9 power supply for manual guns The STD 9 compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 12V. It is designed to be used with KMP 3, KMV 3, KMX 3 and KMC3. It has a built-in electronic system to ensure the safe operation of the spray gun. A switch in the the ATEX safe zone. STD9 POWER SUPPLY STD 9 power supply (manual guns) guns FLUID AND AIR HOSES air hose (F 1/4" NPS) product hose (F 1/2" JIC) Length 5m 10m 10 m insulating 5 m 10 m (resistivity higher than 5 M /cm) (resistivity higher than 5 M /cm) (resistivity lower than 5 M /cm)

195 NOTES Airspray spraying technologies Fittings and air treatment Plural component pumps and machines Electrostatic spraying and equipment AIRLESS AIRMIX 193

196 SPRAYMIUM LOW PRESSURE SPRAY GUN MANUAL ELECTROSTATIC GUNS performances. It's dedicated to companies interested in the process improvement by facilitating the operator work. It's light and a controls and value display is integrated in the gun which allow the operator to choose between 3 preset voltage levels. Compliant with ATEX: ISSeP 08ATEX020 II 2 G Ex 0,24 mj FM approved For use in ATEX zone 1 FEATURES Built-in HT generator Built-in pressure sensor BENEFITS operation Quick maintenance SPECIFICATIONS Fan type Super Vortex Super Vortex Flat SSV08 SSV12 SP 8 bar 8 bar 8 bar Air inlet pressure 6 bar 1 bar 6 bar 1 bar 6 bar 1 bar Temperature (ambient) 0 C - 40 C 0 C - 40 C 0 C - 40 C cm s s. 14 s s. 14 s s. 880 g. 880 g. 880 g. 85 kv maxi. (+0kV; Spraymium or Spraybox 85 kv maxi. (+0kV; Spraymium or Spraybox 85 kv maxi. (+0kV; Spraymium or Spraybox Output current 100 μa maxi. 100 μa maxi. 100 μa maxi. Air connection on the F 1/4 NPS F 1/4 NPS F 1/4 NPS ø 8mm ø 8mm ø 8mm Paint Connection type M 1/2 JIC M 1/2 JIC M 1/2 JIC CONFIGURATION OF THE SPRAYMIUM LOW PRESSURE SPRAY GUN Tip Resistivity range (M.cm) Fan shape Size (mm) SPRAYMIUM SSV08 LP HR JR SPRAYMIUM SSV12 LP HR JR SPRAYMIUM SP LP HR JP JP SPRAYMIUM SSV08 LP LR JR 08 SPRAYMIUM SSV12 LP LR JR 12 SPRAYMIUM SP LP LR JP JP SPRAYBOX CONTROL BOX PART NUMBERS 194

197 SPRAYMIUM LOW PRESSURE SPRAY GUN MANUAL ELECTROSTATIC GUNS Airspray spraying technologies FLUID HOSES FOR HR AND LR Fluid Resistivity range (M.cm) Fitting Length (m) FF 1/2 JIC 10 (1) - (1)Need an extension, see relevant table. HR FLUID HOSES EXTENSIONS PART NUMBERS Length (m) AIRMIX Length (m) PAINT HOSES KITS WITH EXTENSIONS FOR LR Length (m) Paint hoses kits with extensions 15 Paint hoses kits with extensions 20 AIRLESS SPRAYMIUM GUN KITS Kit designation Resistivity range (M.cm) Fan shape Tip size (mm) Hoses Length (m) Kit SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM Plural component pumps and machines Fittings and air treatment SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM Electrostatic spraying and equipment 195

198 SPRAYMIUM HIGH PRESSURE SPRAY GUN MANUAL ELECTROSTATIC GUNS The Spraymium performances. It's dedicated to companies interested in the process improvement by facilitating the operator work. It's light and a controls and value display is integrated in the gun which allow the operator to choose between 3 preset voltage levels. The AIRMIX version is avaiblable in fan or round spray. Compliant with ATEX Directive: ISSeP 08ATEX020 II 2 G Ex 0,24 mj FM approved To be used in zone 1 FEATURES Built-in HT generator Built-in pressure sensor BENEFITS operation Quick maintenance SPECIFICATIONS Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) Total Length (cm) Probe voltage Maximum current Upon tips 0-85 kv 100 μa AIRCAP X 14 CONFIGURATION OF THE ELECTROSTATIC SPRAYMIUM GUN Resistivity range Tips Fan shape Aircap (M.cm) size (mm) SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYBOX CONTROL BOX 196

199 SPRAYMIUM HIGH PRESSURE SPRAY GUN FLUID HOSES FOR HR AND LR HR FLUID HOSES EXTENSIONS PART NUMBERS Resistivity range (M.cm) Resistivity range (M.cm) Fitting MANUAL ELECTROSTATIC GUNS Length (m) FF 1/2 JIC FF 1/2 JIC FF 1/2 JIC FF 1/2 JIC Fluid Produit Length (m) FF 1/2 JIC FF 1/2 JIC (1) - (1)Need an extension, see relevant table. Fitting Airspray spraying technologies AIRMIX PAINT HOSES KITS WITH EXTENSIONS FOR LR Resistivity range (M.cm) Length (m) Paint hoses kits with extensions Paint hoses kits with extensions Length (m) AIRLESS SPRAYMIUM GUN KITS Resistivity range (M.cm) Fan shape Air cap Tip size (mm) Hoses Length (m) SPRAYMIUM SPRAYMIUM SPRAYMIUM Plural component pumps and machines Fittings and air treatment SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM SPRAYMIUM Electrostatic spraying and equipment 197

200 MANUAL ELECTROSTATIC GUNS Special tips with dielectric insert for SPRAYMIUM SPECIAL TIPS FOR SPRAYMIUM Size (1) Water output in l/mn Ø equivalent (mm) Screen mark Average width of fan at 25 cm 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number the tip number the tip number the tip number the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx

201 KMV 3 H2O SPRAY GUN This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an optimal electrostatic effect. Perfect for complex parts: tubular, frames, complex shapes, tables... MANUAL H2O ELECTROSTATIC GUNS Airspray spraying technologies FEATURES Built-in HT generator BENEFITS Model shown: KMP3 H2O AIRMIX SPECIFICATIONS Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 FITTINGS 1 max 285 mm 40 s CA4 maxi kv 100 μa Fitting Air M 1/4" NPS - Polyethylene F 1/2" JIC AIRLESS Electrostatic spraying and equipment AIRCAP KMV KMV 3 H2O GUN CONFIGURATION Tip Fan shape Aircap Size (mm) Aircaps, tips, needles for KMV3 H2O Plural component pumps and machines AIRCAPS, TIPS AND NEEDLES FOR KMV 3 H2O Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) 16 Nm /h at 4 bar AIRCAP RINGS Fittings and air treatment 199

202 KMP 3 H2O SPRAY GUN MANUAL H2O ELECTROSTATIC GUNS This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an while maintaining excellent edge coverage: cabinets, industrial bodyshops, accessories... FEATURES Built-in HT generator BENEFITS SPECIFICATIONS Maximum air inlet pressure (bar) 6 10 Weight w/o hose nor cable (g) Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) mm 40 s CA kv 100 μa Polyacetal - Polyethylene FITTINGS Fitting Air M 1/4" NPS F 1/2" JIC AIRCAP KP3 KMP3 H2O FLAT FAN CONFIGURATION Tip Fan shape Aircap Size (mm) Flat 1.2 Aircaps, tips, needles for KMP3 H2O TIPS, AIRCAPS AND NEEDLES FOR KMP3 H2O Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) Fluid output 24 N m /h at 4 bar 600 cm /mn at 4 bar 24 N m /h at 4 bar 800 cm /mn at 4 bar AIRCAP RINGS 200

203 KMX 3 H2O GUN This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an while maintaining excellent edge coverage: cabinets, industrial bodyshops, accessories... MANUAL H2O ELECTROSTATIC GUNS Airspray spraying technologies FEATURES Built-in HT generator BENEFITS AIRMIX SPECIFICATIONS Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 620 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 FITTINGS Upon tips Fitting Air M 1/4" NPS 285 mm 40 s CA4 maxi kv 100 μa Polyacetal - Polyethylene F 1/2" JIC Model shown KMP AIRLESS Electrostatic spraying and equipment AIRCAP KX16 KMX3 H2O GUN CONFIGURATION Tip Fan shape Aircap Size (mm) Aircaps, tips, needles for KMX3 H2O Plural component pumps and machines TIPS, AIRCAPS AND NEEDLES FOR KMX3 H2O Gun type Aircap w/o ring Tips Needle for manual guns Type 5 Nm /h at 2 bar table 8 Nm /h at 2 bar table AIRCAP RING Fittings and air treatment 201

204 MANUAL H2O ELECTROSTATIC GUNS Special tips with dielectric insert SPECIAL TIPS Size (1) Water output in l/mn Ø equivalent (mm) Screen mark Average width of fan at 25 cm 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number the tip number the tip number the tip number the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx

205 KMC3 H2O GUN This gun is designed for water-based materials without built-in electronic and without electrical cable. This gun has to be used with a special hose for an optimal electrostatic effect. Perfect for large complex parts. MANUAL H2O ELECTROSTATIC GUNS Airspray spraying technologies FEATURES Built-in HT generator BENEFITS AIRMIX SPECIFICATIONS Maximum air inlet pressure (bar) Weight w/o hose nor cable (g) 620 Total Length (cm) Probe voltage Maximum current Maximum temperature ( C) 60 Upon tips 285 mm 40s CA 4 maxi kv 100 μa Polyacetal - Polyethylene Model shown: KMX3 H2O gun AIRLESS FITTINGS Fitting Air M 1/4" NPS AIRCAP KXC5 F 1/2" JIC Electrostatic spraying and equipment KMC3 H2O HOLLOW FAN GUN CONFIGURATION Tip Fan shape Aircap Size (mm) KMC 3 H20 MAINTENANCE KIT Plural component pumps and machines Aircaps, tips, needles KMC3 H2O AIRCAPS, TIPS, NEEDLES FOR KMC 3 Gun type Aircap Tip Needle for KAC type air output Size (mm) Fluid output 8 Nm /h at 2 bar 200 cm /mn 8 Nm /h at 2 bar /mn 8 Nm /h at 2 bar 400 cm /mn 8 Nm /h at 2 bar 500 cm /mn 8 Nm /h at 2 bar 600 cm /mn 8 Nm /h at 2 bar /mn Fittings and air treatment 203

206 ISOBUBBLE II MANUAL H2O ELECTROSTATIC GUNS For water-based paints, the pump and paint should be isolated in an ISOBubble. The ISOBubble II, with a compact design, can be installed near the working area. With a large sliding cover, it allows for fast and easy pressure adjustements and colour changes. A built-in safety device ensures the system is grounded when the gun is not triggered or if the cover is opened. FEATURES New connectic BENEFITS SPECIFICATIONS Material White polyethylene Total height (mm) Internal height (mm) Weight (kg) Maximum air inlet pressure (bar) 6 ISOBUBBLE II PART NUMBERS Recommended hoses Hoses Length (m) Barrel ISOBubble II gun or automatic guns) Pump not supplied

207 MANUAL H2O ELECTROSTATIC GUNS STD9 B power supply for H2O manual guns The STD 9 B compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 8V. It has to be used with KMP 3 H2O, KMV 3 H2O, KMX 3 H2O and KMC 3 H2O. It has a built-in electronic system to ensure the safe operation of the spray gun. A switch in the power supply turns the voltage on when the gun is triggered and atomization air STD9 POWER SUPPLY Airspray spraying technologies AIRMIX Feeding hoses for H2O guns The special hose allows for an optimum electrostatic effect by preventing any condensation. Fittings and air treatment Plural component pumps and machines AIRLESS ADAPTATION FITTING FEEDING HOSES FOR H2O GUN 15 m length. 10 m length. Electrostatic spraying and equipment 205

208 KAV SPRAY GUN AUTOMATIC ELECTROSTATIC GUNS Swirling fan for the ultimate wrap-around effect on tubular parts. Compliant with ATEX directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be use in zone 1 FEATURES BENEFITS Generator barrel close to the gun SPECIFICATIONS 6 6 Trigger air pressure (bar mini) 4 Weight 1100 with BG barrel Total Length (cm) 40s max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 brass FITTINGS Fitting Air Fitting (resistivity > 5Mohms.cm) M 1/2 JIC Fitting (resistivity < 5Mohms.cm) F 1/2 JIC KMV AIRCAP PISTOLET KAV Aircap Tip Voltage cable length (m) with generator barrel with out generator barrel Aircaps, tips, needles for KAV TIPS, AIRCAPS AND NEEDLES FOR AUTOMATIC GUNS Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) 16 Nm /h at 4 bar /mn at 1.5 bar AIRCAP RINGS 206

209 KAP SPRAY GUN New generation of automatic electrostatic gun which guarantees product savings and increased productivity thanks to the wrap-around effect. AUTOMATIC ELECTROSTATIC GUNS Airspray spraying technologies Compliant with ATEX Directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be used in zone 1 FEATURES SPECIFICATIONS 6 Maximum air inlet pressure (bar) 6 4 Trigger air pressure (bar mini) 4 Weight 1100 with BG barrel 0.24 Total Length (cm) 40s max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 FITTINGS Fitting Air Fitting (resistivity > 5Mohms.cm) Fitting (resistivity < 5Mohms.cm) M 1/2 JIC F 1/2 JIC BENEFITS Generator barrel close to the gun AIRMIX AIRLESS Electrostatic spraying and equipment KP3 AIRCAP KAP CONVENTIONAL GUN Aircap Nozzle Diameter Voltage cable length (m) with generator barrel with generator barrel Plural component pumps and machines AIRCAPS Fan width (cm) 20 TIPS Nozzle Diameter Fittings and air treatment 207

210 AUTOMATIC ELECTROSTATIC GUNS Aircaps, tips, needles fo KAP TIPS, AIRCAPS AND NEEDLES FOR AUTOMATIC GUNS Gun type Aircap w/o ring Tip Needle automatic guns Type Size (mm) Fluid output 24 N m /h at 4 bar 600 cm /mn at 4 bar 24 N m /h at 4 bar 800 cm /mn at 4 bar AIRCAP RINGS 208

211 KAX SPRAY GUN AUTOMATIC ELECTROSTATIC GUNS New generation of automatic electrostatic guns witha swirling fan for maximum wrap-around effect on complex Airspray spraying technologies Compliant with ATEX Directive: INERIS 04 ATEX 0093X II 2 G EEx 0,24 mj To be used in zone 1 FEATURES BENEFITS Generator barrel close to the gun AIRMIX SPECIFICATIONS 120 Trigger air pressure (bar mini) 4 6 Weight 1100 with BG barrel Upon tip Total Length (cm) 40s CA4 max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 FITTINGS Fitting Air Fitting (resistivity > 5Mohms.cm) M 1/2 JIC Fitting (resistivity < 5Mohms.cm) F 1/2 JIC AIRLESS Electrostatic spraying and equipment KX16 AIRCAP KAX GUN Supplied with aircap Tip Voltage cable length (m) with generator barrel 12 without generator barrel - Aircaps, tips, needles for KAX AIRCAPS, TIPS, NEEDLE Gun type Aircap w/o ring Tips Needle for manual guns Type 5 Nm /h at 2 bar tips table 8 Nm /h at 2 bar tips table AIRCAP RING Plural component pumps and machines Fittings and air treatment 209

212 AUTOMATIC ELECTROSTATIC GUNS Special tips with dielectric insert SPECIAL TIPS Size (1) Water output in l/mn Ø equivalent (mm) Screen mark Average width of fan at 25 cm 20 bar 35 bar 50 bar 13 cm 19 cm 23 cm 27 cm 35 cm or or or or 12 number the tip number the tip number the tip number the tip (1) To determine the part number of a tip, use the number listed in the table and replace the crosses in the following part number: 134.5xx.xxx

213 KAC SPRAY GUN New generation of automatic electrostatic guns. Swirling fan for a maximum wrap-around effect on complex parts. AUTOMATIC ELECTROSTATIC GUNS Airspray spraying technologies Conforme à la Directive ATEX: INERIS 04 ATEX 0093X II 2 G EEX 0,24 mj To be used in zone 1 FEATURES BENEFITS Generator barrel close to the gun AIRMIX SPECIFICATIONS 120 Trigger air pressure (bar mini) 4 6 Weight 1100 with BG barrel Upon tip Total Length (cm) 40s CA4 max. Probe voltage 85 kv max Maximum current 100 μa Maximum temperature ( C) 60 FITTINGS Fitting Air Fitting (resistivity > 5Mohms.cm) M 1/2 JIC Fitting (resistivity < 5Mohms.cm) F 1/2 JIC AIRLESS Electrostatic spraying and equipment AIRCAP KXC5 KAC GUN Fluid output (l/mn) Voltage cable length (m) Upon tip 12 Upon tip - Plural component pumps and machines Aircaps, tips, needles for KAC AIRCAPS, TIPS, NEEDLES FOR KAC Gun type Aircap Tip Needle for KACv type air output size (mm) Fluid output 8 Nm /h at 2 bar 200 cm /mn 8 Nm /h at 2 bar /mn 8 Nm /h at 2 bar 400 cm /mn 8 Nm /h at 2 bar 500 cm /mn 8 Nm /h at 2 bar 600 cm /mn 8 Nm /h at 2 bar /mn Fittings and air treatment 211

214 AUTOMATIC ELECTROSTATIC GUNS STD9 A power supply for automatic guns The STD 9 A compact power supply transforms main alternating current into a variable direct current adjustable between 3V and 12V. It has to be used with the KAP 3, KAV 3, KAX 3 and KAC 3. It has a built-in electronic system to ensure the safe operation of the spray gun. A switch in the power supply turns the voltage on when the gun is triggered and atomization air STD9 POWER SUPPLY Air control cabinet Turn electrostatic gun into a non-bleeding gun Controls air pressures Equipped with 2 air regulators for atomization and fan air control Pneumatic switches for gun trigger control. AIR CONTROL CABINET Air control cabinet Generator barrel, special HT cable supply. GENERATOR BARREL Length (m)

215 SPECIFIC ELECTROSTATIC EQUIPMENT Conversion kits Airspray spraying technologies Whatever the gun type is (KMP, KMV, KMX, KMC), it is possible to switch to another version (for example from KMC to KMX) by choosing the appropriate conversion kit. Tip Supplied with aircap Kit designation 1.2 AP1000 Resistivity gauge AIRMIX Comes complete with probe PART NUMBER AP 1000 high precision resistivity gauge Spray gun cover AIRLESS Essential during spraying, the cover offers total protection for the spray gun SPRAY GUN COVER Quantity 10 Hose protection sleeve Electrostatic spraying and equipment PART NUMBER Product hole (mm) Length (m) Hoses Sleeve (for AIRMIX version with hoses 1m + 10m) FILTERS 6 screen - 168μ FILTER SCREEN Thread sure (bar) Inlet Outlet Between 2 hoses M1/2 JIC M1/2 JIC bar M1/2 JIC F1/2 JIC Filtration size Filter number Micron Mesh Nozzle size Screen number 12 (x5) Screen number 12 (x5) Plural component pumps and machines Fittings and air treatment 213

216 214 NOTES

217 PLURAL COMPONENT PUMPS AND MACHINES

218 PU 2125 F PUMP MECHANICAL MIXING The Flowmax technology, a Kremlin Rexon patented SuperLife bellow design, ensures a perfect mixing accuracy thanks to the total sealing without packings. FEATURES Sealing done by a FLOWMAX bellow on the catalyst side Comes with mixer, mix manifold, air feeding 6 L catalyst gravity tank Semi-automatic manifold with synoptic Catalyst re-circulation standard Cart-mounted pump BENEFITS High reliability No more lubricant cups Leak free ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Ready to use pump Safe operation User-friendly Chemical compatibility w/o any risk of corrosion with water-based materials areas) SPECIFICATIONS Mixing ratio (upon version) 1/1-2/1-3/1-4/1-5/1 Pressure ratio 0.9 à 1.6/1 Max Fluid viscosity in CA 4 Maximum air inlet pressure (bar) 6 Balanced acoustic pressure (dba) 80 Weight (kg) 50 Wetted parts 180 s Stainless steel, polyethylene, treated steel DOSING RATIO Volumic dosing ratio Fluid Output at 20 Cycles/ mn (l/mn) Pressure ratio Fluid pressure (upon air motor pressure) 4 bar 6 bar PU 2125 F 1/1 1/ / PU 2125 F 2/1 2/ / PU 2125 F 3/1 3/ / PU 2125 F 4/1 4/ /1 6 9 PU 2125 F 5/1 5/ / FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Outlet M 1/2" JIC PU 2125F PART NUMBERS PU 2125F pump cart-mounted - Dosing ratio 1/ PU 2125F pump cart-mounted - Dosing ratio 2/ PU 2125F pump cart-mounted - Dosing ratio 3/ PU 2125F pump cart-mounted - Dosing ratio 4/ PU 2125F pump cart-mounted - Dosing ratio 5/

219 PU 2160 F PUMP The Flowmax technology, a Kremlin Rexon patented SuperLife bellow design, ensures a perfect mixing accuracy thanks to the total sealing without packings. spraying. MECHANICAL MIXING Airspray spraying technologies FEATURES Cart-mounted pump Comes with mixer, mix manifold, air feeding 6 L catalyst gravity tank standard Sealing done by a FLOWMAX bellow on the catalyst side Semi-automatic manifold with synoptic Catalyst re-circulation Complete stainless steel 316 catalyst circuit on 10/1 pressure ratio version BENEFITS areas) Ready to use pump Chemical compatibility w/o any risk of corrosion with water-based materials High reliability No more lubricant cups Leak free ideal to work with moisture-sensitive catalysts Ideal for UV and pre-catalyzed materials Safe operation User-friendly Ideal for chemically agressive catalysts AIRMIX AIRLESS SPECIFICATIONS Mixing ratio (upon version) 1/1-2/1-5/1-10/1 Pressure ratio 10/1-15/1-18/1-20/1 Max Fluid viscosity in CA 4 Maximum air inlet pressure (bar) 6 Balanced acoustic pressure (dba) 80 Weight (kg) 60 Wetted parts 180 s Electrostatic spraying and equipment DOSING RATIO Volumic dosing ratio Fluid Output at 20 Cycles/ mn (l/mn) Pressure ratio Fluid pressure (upon air motor pressure) 4 bar 6 bar PU 2160 F 1/1 1/ / PU 2160 F 2/1 2/ / PU 2160 F 5/1 5/ / PU 2160 F 10/1 10/ / Plural component pumps and machines FITTINGS Fitting Air inlet (valve) F 3/8" BSP Air outlet (atomization air) M 1/4" NPS Fluid Outlet M 1/2" JIC PU 2160F PART NUMBERS PU 2160 F pump - cart-mounted - pressure ratio 1/ PU 2160 F pump - cart-mounted - pressure ratio 2/ PU 2160 F pump - cart-mounted - pressure ratio 5/ PU 2160 F pump - cart-mounted - pressure ratio 10/ Fittings and air treatment 217

220 PU 3000 ELECTRONIC DOSING electronic control and mechanical metering, ready to use. operate the machine. to the operator. most markets requirements. FEATURES Plug & Spray Innovative control system of pump change-over Direct injection in the high performance static mixer Possibility to print records and solvent User-friendly control panel Preventive maintenance alarm Continuous ratio checking and alarm Low level drum alarm Ratio check kit in standart with 2 liters test tube Filter and drain assembly in standart Sealing done by a FLOWMAX bellow on the catalyst side Wide range of ratio from 5 to 160% BENEFITS Quick start-up Unsurpassed +/- 1% mixing accuracy and +/- 1% repeatability Perfect mixing Fluid and solvent consumptions stored in memory User friendly User-friendly and easy programming for the operator Safe operation Visual control of mixing accuracy No product loss High reliability ideal to work with moisture-sensitive catalysts Suitable for use on a wide range of markets SPECIFICATIONS 115/230V - 75W Maximum air inlet pressure (bar) 6 Fluid viscosity Mixing accuracy +/- 1% 10cc at 2000 cc / min Mixing ratio 1/1-30/1 Wetted parts 218

221 PU 3000 TECHNICAL CHARACTERISTICS Pressure ratio 1/1. 7/1 0/6-0/40 PU AIRMIX version 30 / / ELECTRONIC DOSING Airspray spraying technologies PU 3000 DIMENSIONS AIRMIX Electrostatic spraying and equipment Fittings and air treatment Height (cm) Depth (cm) Width (cm) AIRMIX version Control Box FITTING Fitting Air inlet (valve) F 3/4" BSP Air Outlet F 1/4" BSP Fluid Outlet F 3/4 JIC AIRLESS PU 3000 PART NUMBERS PU AIRMIX version PU 3000 OPTIONS PART NUMBERS Spray booth glass mounting kit Flushing pump Please consult us Plural component pumps and machines 219

222 CYCLOMIX MICRO AND MICRO+ PH ELECTRONIC DOSING parameters. The programming is user-friendly and quick, with data in-putting by magnetic signal. Flushing and maintenance are FEATURES and solvent Operating pressure from 2 to 200 bar Continuous ratio checking and alarm User-friendly control panel Stainless steel design possibility to print records (with RS 232 option) Possibility to monitor the Cyclomix Micro from the spray booth (with the glass kit option) Design of the mixing plate BENEFITS Dosing +/- 1% and repeatability +/- 0.5% Quick start-up. Minimal material and solvent wastage. Solvent savings and environmental protection spray technologies User-friendly and easy programming for the operator Fluid and solvent consumptions stored in memory SPECIFICATIONS 4 Product pressure (bar) Weight (kg) / 230V - 75W Wetted parts 316L stainless steel on PH version catalyst side Mixing ratio single component and 0,6/1 to 20/1 Mixing accuracy 1% cm 3 /mn Fluid viscosity cps height (cm) 17.3 (command cabinet) - 40 (dosing unit) Width (cm) 36.6 (command cabinet) (dosing unit) Depth (cm) 11.1 (command cabinet) - 30 (dosing unit) FITTINGS Air supply Air outlet Fluid supply Fluid outlet Fitting F 1/4" BSP F 1/4" BSP M 1/2" JIC M 1/2" JIC CYCLOMIX MICRO AND MICRO+ PART NUMBERS Number of bases Number of catalysts CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro CYCLOMIX Micro+ PH (without mixer - see options) CYCLOMIX Micro+ PH PART NUMBERS OPTIONS CYCLOMIX MICRO AND MICRO+ Mixing assembly for Cyclomix Micro+ PH RS 232 connection kit for printer Spray booth glass mounting kit m extension cable between control cabinet and mixing panel

223 CYCLOMIX MULTI AND MULTI PH ELECTRONIC DOSING Airspray spraying technologies FEATURES and solvent Adaptable programming for each color production stops, solvent-based materials Fast mixing ratio accuracy by beakers batch mode Operating pressure from 2 to 200 bar Autowash system Multilingual display and integrated instruction manual Stainless steel design Numerical interface Integrated spraying air management Design of the mixing plate Robotic interface BENEFITS Dosing +/- 1% and repeatability +/- 0.5% Quick start-up. Minimal material and solvent wastage. Ideal application for each color Perfect compatibility with production conditions evolutions Visual control of mixing accuracy touch-up works AIRMIX Off-production gun automatic monitoring User-friendly and easy programming for the operator Compatible with water-based materials Quick link with an on-line automate Connection with an on-line automate AIRMIX AIRLESS SPECIFICATIONS 115 / 230 V - 75 W 4 Product pressure (bar) bar Weight (kg) 70 Wetted parts Stainless steel and PeHD Mixing ratio 0.6/1 à 30/1 (160% à 5%) Mixing accuracy +/- 1% 3 /h) cm 3 /mn cm 3 /mn Fluid viscosity cps height (cm) 60 (control cabinet) - 77 (mixing unit) Width (cm) 60 (control cabinet) - 60 (mixing unit) Depth (cm) 40 (control cabinet) - 77 (mixing unit) Electrostatic spraying and equipment FITTINGS Fitting Air supply F 1/4" BSP Air outlet F 1/4" BSP Fluid supply M 1/2" JIC Fluid outlet F 1/4" BSP CYCLOMIX MULTI PART NUMBERS Number of bases Number of catalysts CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi CYCLOMIX Multi PH CYCLOMIX Multi PH CYCLOMIX Multi PH OPTION PART NUMBER CYCLOMIX MULTI Autowash Plural component pumps and machines Fittings and air treatment 221

224 CYCLOMIX EXPERT ELECTRONIC DOSING mono, bi or tri-component materials The machine can handle 2 working stations at the same time. The machine programming by means of a color catalysts. market needs, in manual or automatic spraying. - Remote color screen control cabinet FEATURES Automatic component management up to 24 components in 1,2, 3 components and solvent retention zones BENEFITS Innumerible possibilities Flexibility when changing materials Continuous process control Stainless steel design Compatible with water-based materials of potlife Mixed material and solvent savings Safe operation batch mode touch-up works Adaptable programming for each color Ideal application for each color 3 data access level upon each operator Safety use Assisted data and tolerance product manufacturer Quick and easy data entry eliminating any errors Color man/machine interface User friendly Standard monitoring of 2 guns (2 priming - Ratio check standard) Multiples solvent choice for each recipe Magnetic injection volume adjustment - electro magnetic valves USB data storage Batch number management gear Possibility to manage 2 workstations simultaneously (1 or 2 guns or both) Safe operation Full operator safety Solvent consumption optimlization upon recipe Mixing optimization upon ratios Production Follow-up optimization Handles a large range of materials 222

225 CYCLOMIX EXPERT SPECIFICATIONS Voltage (V) Operating pressure (bar) Mixing ratio (in standard) 0.6/1 at 30/1 Mixing accuracy +/- 1% cm 3 /mn Fluid viscosity cps Wetted parts Stainless steel and PeHD (option 316L) Width (cm) 100 (3K) - 89 (2K) Height (cm) 119 (3K) - 91 (2K) Weight (kg) 48 (2K) - 68 (3K) ELECTRONIC DOSING Airspray spraying technologies AIRMIX CONTROL BOX CHARACTERISTICS Width (cm) 60 Height (cm) 60 Depth (cm) 40 Weight (kg) 25 Fittings and air treatment Electrostatic spraying and equipment CYCLOMIX EXPERT PART NUMBER CYCLOMIX Please consult us AIRLESS Plural component pumps and machines

226 NOTES

227 FITTINGS AND AIR TREATMENT

228 Male to male connection Pmax: 20 bar Max Pressure (20 bar) METRICAL FITTINGS - 20 BAR Male/Male M 14 x 125 M 18 x 125 M 14 x 125 M 18 x 125 METRICAL ADAPTORS TOWARDS BSP - 20 BAR METRICAL ADAPTORS TOWARDS NPT - 20 BAR (1) (1) Male/Male M 14 x 125 M 18 x 125 M 26 x 125 M 38 x 150 G 1/8" (BSP) (5 x 10) G 1/4" (BSP) (8 x 13) G 3/8" (BSP) (12 x 17) G 1/2" (BSP) (15 x 21) (1) (1) (1) (1) (1) G 3/4" (BSP) (20 x 27) G 1" (BSP) (26 x 34) Male/Male M 26 x 125 1/2" NPT Male to male connection Pmax: 60 bar FITTINGS BSP (GAZ) - 60 BAR Male/Male G 1/8" (5 10) G 1/4" (8 13) G 3/8" (12 17) G 1/2" (15 21) G 3/4" (20 27) G 1/8" (5x10) (1) G 1/4" (8 13) (1) (1) (1) G 3/8" (12 17) G 1/2" (15 21) FITTINGS NPT - 60 BAR Male/Male 1/4" NPT 3/8" NPT 1/4" NPT /8" NPT (1) (1) (1) (1) G 3/4" (20 27) FITTINGS NPS - 60 BAR Male/Male 1/4" NPS 3/8" NPS 1/4" NPS /8" NPS ADAPTOR NPS TOWARDS BSP (GAZ) - 60 BAR (1) Male/Male 1/4" NPS 3/8" NPS G 1/4" BSP G 3/8" BSP G 1/2" BSP (1) (1) (1) (1) (1) G 3/4" BSP (1) 226

229 Female to female connection Pmax: 60 bar FITTINGS BSP (GAS) - 60 BAR Female/Female G 1/4" (BSP) G 1/4" (BSP) (8 x 13) G 3/8" (BSP) (12 x 17) ADAPTOR BSP (GAZ) TOWARDS METRIC - 20 BAR Female/Female G 1/4" (BSP) M 14 x T FEMALE BSP (GAZ) - 60 BAR Fittings 3 G 1/4" (BSP) (8 13) Fittings 3 G 3/8" (BSP) (12 17) Fittings 3 G 1/2" (BSP) (15 21) Fittings 3 G 3/4" (BSP) (20 27) T FEMALE NPT - 60 BAR Fittings 3 1/4" NPT Male to female connection Pmax: bar ADAPTOR NPS TOWARDS JIC, NPS AND METRIC - 20 BAR Female/Male 1/4" NPS 3/8" NPS 1/2" JIC (1) (1) 1/4" NPS (1) M (1) FITTINGS BSP (GAZ) - 60 BAR Female/Male G 1/4" (8 13) G 3/8" (12 17) G 3/4" (20 27) G 1/4" (8 13) G 3/8" (12 17) G 1/2" (15 21) G 3/4" (20 27) G 1" (26 34) FITTINGS METRIC - 20 BAR Female/Male M M M M M M ADAPTOR METRIC TOWARDS NPS - 20 BAR Female/Male M M /4" NPS /8" NPS ADAPTOR JIC TOWARDS METRIC - 20 BAR Female/Male M M /2" JIC ADAPTOR JIC TOWARDS NPS AND METRIC - 20 BAR Female/Male 1/2" JIC 1/4" NPS /8" NPS M 18 x Airspray spraying technologies AIRMIX AIRLESS Electrostatic spraying and equipment Plural component pumps and machines Fittings and air treatment 227

230 special air hoses CONFIGURATION FITTINGS C D C D C D Straight Right angle 90 T- piece G 1/8" (5 x 10) BSP G 1/8" (5 x 10) BSP G 1/4" (8 x 13) BSP G 1/4" (8 x 13) BSP D G 1/4" (8 x 13) BSP x 8 hose T T for hose 4 x 6 2,7 x 4 Hose T- piece 4 x 6/2,7 x 4 Reduction T- piece C (maximum pressure: 10 bar) C cuanneled A (F) (M) B QUICK FITTINGS Type Ø5 (14x125) Ø5 (1/4" BSP) Ø5 (1/4" BSP) Ø5 (1/4" NPS) Complete assembly A and B Part A with built-in chutter valve Part B (F) (M) (F) (F) Part C for rubber hose Ø 7 Ø Holding collar COMPLETE QUICK DISCONNECT 1/4" NPS FOR AIR HOSE QUICK FITTINGS FOR Ø 8 HOSE Type Part A with on/off press buttom for hose Ø 8 Part C for hose Ø 8 Ø Fittings for low pressure polyamide hoses FITTINGS CONFIGURATION Thread size Material Hoses Inter. Diameter (mm) M 3/8" NPS Nickel plated brass / M 1/4" NPS Nickel plated brass / M 3/8" NPS Nickel plated brass /

231 FITTINGS CONFIGURATION Material Thread size Hoses Inter. Diameter (mm) Straight fittings Nickel plated brass 1/4" NPS Nickel plated brass 1/4" NPS Nickel plated brass 1/4" NPS Nickel plated brass 3/8" NPS Nickel plated brass 3/8" NPS Nickel plated brass 3/8" NPS Stainless steel M 14 x Nickel plated brass M 14 x Nickel plated brass M 18 x Stainless steel M 18 x Nickel plated brass M 18 x Nickel plated brass M 18 x Nickel plated brass M 26 x Elbow fittings Nickel plated brass M 18 x Junction fittings without thread Nickel plated brass Nickel plated brass Collar Airspray spraying technologies AIRMIX AIRLESS Plugs Pmax: bar PLUGS CONFIGURATION Male Male G 1/8 " (5 x 10) G 1/4" (8 x 13) G 3/8" (12 x 17) G 1/2" (15 x 21) G 3/4" (20 x 27) Electrostatic spraying and equipment (protective coated steel) Pmax: 400 bar FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 7/8" JIC 1/2" JIC /4" JIC /8" JIC Plural component pumps and machines (stainless steel) Pmax: 360 bar FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC Fittings and air treatment 229

232 Male to male adapters: Pmax: 360 bar PROTECTED STEEL FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 1/4" NPT /8" NPT /2" NPT /4" NPT STAINLESS STEEL FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 1/8" NPT /4" NPT /8" NPT /2" NPT /4" NPT PROTECTED STEEL FITTING CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 7/16" JIC 7/8" JIC 11/16" JIC 1 5/16" JIC 1/8" G co /4" G co /8" G co /2" G co /4" G co " G co NICKEL-COATED FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 3/8" NPT Pmax: 360 bar FITTINGS CONFIGURATION Male/Female (free nut) 1/2" JIC 1/2" JIC (stainless steel) Pmax: 360 bar FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 1/4" NPT /8" NPT /2" NPT /4" NPT

233 (protective coated steel) Pmax: 360 bar Airspray spraying technologies NPT FITTINGS CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 1/8" NPT /4" NPT G CO FITTING CONFIGURATION Male/Male 1/2" JIC 3/4" JIC 1/8" G co /4" G co /8" G co AIRMIX Plugs Pmax: 360 bar PLUGS CONFIGURATION Female 1/2" JIC Male 1/8" NPT AIRLESS Low pressure valves 3 WAYS VALVE PART NUMBERS 3 1/4" BSP x 1/4" BSP (stainless steel) WAYS MALE/MALE VALVE PART NUMBERS Input Output Ball valve (M) G 1/4" (8 x 13) (M) M 14 x Inlet (male) G 3/8" (12 x 17) outlet (male) M 14 x 125 (M) G 3/8" (12 x 17) (M) M 1/4" NPS Inlet (male) G 1/2" (15 x 21) outlet (male) M 18 x 125 (M) G 1/2" (15 x 21) (M) M 18 x Inlet (male) G 1/2" (15 x 21) outlet (male) G 1/2 (15 x 21) (M) G 1/2" (15 x 21) (M) G 1/2" (15 x 21) Inlet (male) G 3/8" (12 x 17) outlet (male) M 18 x 125 (M) G 3/8" (12 x 17) (M) M 18 x WAYS FEMALE/FEMALE VALVE PART NUMBERS Input Output Valve (F) 1/4" BSP (8 x 13) (F) 1/4" BSP (8 x 13) Valve (F) 3/8" BSP (12 x 17) (F) 3/8" BSP (12 x 17) Electrostatic spraying and equipment Plural component pumps and machines Air bleeding valves AIR BLEDDING VALVE PART NUMBER Inlet thread (male) G 1/4" (8 x 13) Fittings and air treatment 231

234 Needle valves 2 WAYS VALVE PART NUMBERS Input Output Female/Male M 14 x 125 M 14 x Male/Male G 1/4" (8 x 13) M 14 x WAYS VALVE PART NUMBERS Female/male/male M 14 x PART NUMBER Input Output (bar) Female/Female G 3/8" (12 x 17) G 3/8" (12 x 17) 250 bar Air line output control valves VALVE PART NUMBERS Input Output Female/Male G 1/4" (8 x 13) G 1/8" (8 x 13) Female/Male M 14 x 125 M 14 x Bleeding valves BLEEDING VALVES PART NUMBERS Input Output (bar) Male/Male G 1/4" (8 x 13) M 18 x Fittings - General information DETAILS Denomination Fitting characteristics Geographical area Max. operating pressure (bar) M cylindrical metric France 20 G = BSP conical gas (or cylindrical) Europe - Asia 60 NPT conical USA - Asia 60 NPS cylindrical USA - Asia 60 JIC cylindrical angle 74 Universal

235 Regulators Airspray spraying technologies CHARACTERISTICS Regulator 1/4" 1/2" 3/4'' Max. inlet pressure (bar) Max. output (m 3 /h) CONFIGURATION Pressure (bar) Type Red knob regulator 3,5 1/4'' Grey knob regulator 3,5 1/4'' regulators 1/4" with isolating valves 2 manometers, 1 inlet valve - 1 outlet valve M 1/4" NPS 3,5 & 9 1/4'' Grey knob regulator 5,5 1/4'' Red knob regulator 5,5 1/4'' Regulator with pressure gauge 5,5 1/4'' Grey knob regulator 9 1/4'' Bare regulator 4 1/2" Bare regulator 9 1/2" Equipped regulator with pressure gauge and wall bracket 10 1/2" regulators (1/4" + 1/2") with isolating valves 2 manometers, 1 inlet valve - 2 outlet valves M 1/4" NPS 9 1/4'' Red ring regulator 10 1/2'' Red ring regulator 10 3/4'' AIRMIX AIRLESS cartridges Electrostatic spraying and equipment Technical characteristics: 3 /h SPECIFICATIONS Air output (m3/h) Height (cm) 29 Fitting Air Inlet F8 x 13G Set-up 1 regulated pressure gauge 1 valve F 1/4" G 1 ball valve F 1/4" G 2 air outlet taps M 1/4" NPS PART NUMBERS Blue cartridge for water Red cartridge for oil Plural component pumps and machines Fittings and air treatment 233