Guardmatic Masonry / Refractory Saw Gasoline Model Parts List
|
|
- Madison Harris
- 5 years ago
- Views:
Transcription
1 October 23, 2003 d Guardmatic Masonry / Refractory Saw Gasoline Model Parts List
2 Reference Information: Model No.: Serial No.: Date Purchased: NOTES:
3 DECAL DESCRIPTIONS AND LOCATIONS DESCRIPCIÓN DE CALCAMONIAS Y UBICACIONES P/N Large Target Logo, Location: Front of Frame P/N Smaller Target Logo Location: Side of Bladeguard LIFT HERE Lower Blade Before Lifting LIFTING EYE Read manual. Lea el manual. Veuillez lire le manuel. WARNING Only Use Lifting Sling Approved For Overhead Lifting. LIFTING EYE 0 DEPTH STOP ADJUSTMENT (355,6mm) Read manual. Lea el manual. Veuillez lire le manuel. 20 (508,0mm) P/N Location: Rear of Engine Belt Guard Secure Or Remove Conveyor Cart Before Lifting OFF WATER PUMP ENGAGEMENT WATER PUMP OFF 1. Loosen Knobs. 2. Push Knobs Left. 3. Tighten Knobs. WATER PUMP ON 1. Loosen Knobs. 2. Push Knobs Right To Contact Belt. 3. Tighten Knobs. Do NOT Run Pump Dry. ON P/N Location: Left Side of Engine Platform P/N Warning Logo Location: Front of Bladeguard Switch Must Be In Start (ON) Position Before Starting Engine. START ARRANQUE STOP ENGINE PARADA MOTOR STOP P/N Stop Switch Decal Location: Near Stop Switch on Cutting Head P/N Location: Front of Bladeshaft Belt Guard P/N Warning Logo, Large Location: Side of Bladeguard P/N Location: Side of Water Pan
4 (x4) A (x4) (x4) (x4) (x2) (x2) (x2) (x2) (x2) (x6) (x2) (x6) (x4) (x4) (x4) (x2) (x3) (x3) (x3) (x3) (x3) (x3) (.005 ) (.015 ) (.020 )
5 (x2) B (x2) (x2) (x3) (x7) (x14) Bladeguard Assembly Complete (x2) (x2)
6 (x2) (x4) (x2) (x4) (x2) (x4) (x2) (x2) (x2) (x4) (x6) (x2) C (x2) (x2) (x2) (x4) (x4) (x2) (x2) (x2) (x4) (x4) (x3) (x4) (x2) (x2) (x2) (x4) (x2) (x4) (x4) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2)
7 D (x2) (x4) (x2) (x4) (x2) (x2) (x2) (x2) (x2) (x8) (x2) (x4) (x4) (x4) (x4) (x4) (x4) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x2) (x4) (x2) (x2) (x2) (x4) (x4) (x2)
8 E (13hp Honda only) (x2) - (9hp Honda only) (Clutch model) (Pulley model) (13hp Honda) (9hp Honda) (13hp Honda) (9hp Honda) (Clutch model) (Pulley model) (13hp Honda) (9hp Honda)
9 P/N Pos. Description P/N Pos. Description C Key, Woodruff # C,D Washer, Flat.375 Dia (13hp Clutch model) C Bolt, Carriage UNC x E Washer, Flat.438 Dia (9hp Clutch model) C Bolt, Carriage UNC x C Washer, Flat.500 Dia C Bolt, Carriage UNC x B,C,D Washer, Flat.250 SAE A Key, Square.250 x 1.50 Lg A, C Washer, Flat.312 SAE D Hose Clamp, Worm Drive B Washer, Flat.375 SAE A Key, Square.188 x 1.25 Lg C Washer, Flat.500 SAE E Key, Square.250 x 2.75 Lg (Clutch model) A,D Lockwasher, Split E Key, Square.250 x 2.75 Lg (Pulley model) D,E Lockwasher, Split.375 (Clutch model) C Nut, Std Hex UNC C Capscrew, Hex Hd UNC x A,B Nut, Jam Hex Hd UNF RH A Washer, Finger Swing C Nut, Jam Hex Hd UNC C Guide, Measuring Assembly A D Nut, Jam Hex Hd UNC C Guide, Measuring - Machined B Locknut, Fiber #10-24UNC C Drain Plug Assembly C,D Locknut, Fiber UNC A,C Grooved Bearing w/stud C Locknut, Thin, Fiber UNC B Link C Locknut, Fiber UNC B Track B,C D Locknut, Fiber UNC B Water Manifold C Locknut, Fiber UNC B Water Manifold Gasket C Nut, Acorn UNC C Skid, 2 x 4 x 47.5 Lg C Clamp, Hose A B Water Tube Assembly C Capscrew, Hex Hd UNC x A Flange, Outer C,D Capscrew, Hex Hd UNC x B Quick Disconnect Body A,D Capscrew, Hex Hd UNC x B Machined Ball Stud A Capscrew, Hex Hd UNF x C Crank Handle Assembly C Capscrew, Hex Hd UNC x C Drain Hose D Capscrew, Hex Hd UNC x A,C Nut, Keps.313UNC D Capscrew, Hex Hd UNC x C Splash Curtain C Capscrew, Hex Hd UNC x A Shim, Brass.005 Thick C Capscrew, Hex Hd UNC x A Shim, Brass.015 Thick C Capscrew, Hex Hd UNC x A Shim, Brass.020 Thick C Capscrew, Hex Hd UNC x C Adjustment Screw, Guardmatic D Capscrew, Hex Hd UNC x C Stop Sleeve A Capscrew, Hex Hd UNF x C Adjustment Nut Assy, Guardmatic B Capscrew, Hex Hd UNC x C Fitting, Grease 1/8 NPT B Screw, Mach Rd Hd #10-32UNF x C Flange Bearing B Screw, Mach Rd Hd #10-32UNF x C Rubber Boot, 4 Inch (27 ribs) C,D Capscrew, Hex Hd UNC x C,D Capscrew, Hex Hd UNC x A,D Screw, Set Soc Cup Pt UNCx D Switch, Toggle A Screw, Set Soc Cup Pt #10-24UNC x B Yoke End B Pin, Cotter.094 x B Pin, Clevis.375 Dia B Pop Rivet, USM #D88BS B Water Valve, 1/4NPT M x 1/4NPT F B Washer, Flat #10 SAE A Brg w/seal, 20ID x 47OD x 14mm D Washer, Flat.250 Dia B Grip, Handle A,C,D Washer, Flat.313 Dia C Spring, Foot Pedal
10 P/N Pos. Description P/N Pos. Description A Pulley, 3G3V Bore A Screw, Set Soc Cup Pt UNC x C Pin, Snapper.375 Dia C Bearing, Lower Pivot, Mach C Pin, Clevis.50 Dia x 1.13 Lg C Bearing, Upper Pivot, Mach D Connector, Snap Plug Female (14-16G a) C Capscrew, Hex Hd UNC x FT D Blub, primer C Front Anchor D Strainer, Suction C Nut Plate Weldment B Elbow, 90 Barb 3/8Hose x 1/4NPT A Bladeshaft, Guardmatic D Elbow, Barb, 3/8 Hose x 1/2 NPT A Arbor Housing, Guardmatic D Isolator, Engine, Duro A Assembly, Bladeshaft D Isolator, Engine, Duro D Wire Ty,.094 x 8.0 Lg (GM-Gas Stop Switch Grp) D Washer, Sp.0625 x.375 x D Plate, Switch on/stop C Hairpin, Cotter.120 Dia x E Engine, 13hp Honda GX390 Gasoline D Eye Nut, Saw Tiedown E Engine, 9hp Honda GX390 Gasoline E Adapter, M12 x 10mm Hose Barb A Depth Stop E Hose Assembly, Oil Drain D Tubing, 3/8 Dia x 36 (Primer Blub to Water Pump) E Cap, Blanking D Tubing, 3/8 Dia x 12 (Primer Blub to Strainer) E Tube Nut, M D Tubing, 3/8 Dia x 48 (Water Pump To Guard) A Capscrew, Hex Hd UNF x B Blade Guard Assy 20, GM B Splash Guard E V-Belt Banded, 3VX C Vinyl Tubing, 3/8 ID C Conveyor Cart Assy, Guardmatic A Bolt, Carriage UNC x A,D Capscrew, Hex Hd UNC x 5.00 (F.T.) D Tee Knob, UNC C Frame Weldment, Guardmatic E Hose Clamp, Worm Drive C Spacer, Head Platform D Cord Assy (Stop Switch) A Belt Guard Wldmt, Guardmatic C Adjustment Nut Weldment A Guard, Inner, Blade Belts C Tilt Adjust Yoke A Pulley, 3G3V 3.35OD.75 Bore D Water Pump, Mechanical, Mod A Counter Shaft, 1.00 Dia D Pulley, 1G3V w/ set screws D Bracket Wldmt, Tension C Wrench, 1/2 x 3/ D Front Pulley Guard C Wood Insert E Clutch, 3G3V 3.48OD 1.0 Bore C Screw, Wood Rd Hd #8-32UNC x 1.25 Phil D Support Tilt Arm, GM-Gas A Collar, Inner C Tilt Frame Weldment, GM-Gas C Decal, Ruler Set, Guardmatic C Brkt, Spring, Foot Pedal, GM-Gas C Knob, Tee 5/16-18UNC x C Foot Pedal Wldmt, GM-Gas E Capscrew, Hex Hd UNF x 1.50 (13hp Clutch model) E Pulley, 3G3V 3.48OD, 1.0 Bore w/ setscrews D Grommet, 7/16ID x 11/16 Dia Hole C Frame Group, GM-Gas D Plug, Plastic Hole 3/4 Dia A Head Platform Wldmt, GM Gas C Spherical Washer Set A Head Pivot Platform Wldmt, GM Gas A Snap Ring, External 2.25 Dia Shaft D Mount, Isolator Honda 9 &13hp C Conveyor Cart Back Stop D Base, Engine, Honda 9 &13hp B Screw, Mach, Hex Hd #10-24UNC x D Platform Brkt, Engine, GM-Gas D Fitting, Elbow 90, 3/8 Hose x 3/8 NPT D Guard, Engine Belt, GM-Gas A Bearing Insert, 1 ID x 52mm OD D Bracket, Water Pump E Capscrew, Hex Hd UNF x 1.50 (9hp Clutch model) D Shield Weldmt, Water Pump B Handle, Tubing, PC Black A Pulley, 3G3V 4.50,1.0 w/ set screws
11 NOTES / NOTAS:
12 Target Corporate Office West 119th Street Olathe, Kansas Phone: Customer Service: Customer Service Fax: Corporate Office Fax: Customer Service, Int l: Cerritos, CA Warehouse: Cerritos, CA Warehouse Fax: Target Latin America, Mexico, Caribbean, Central and South America West 119th Street Olathe, Kansas Phone: Fax: Target Canada Phone: Fax: Warning! Some dust created bypower sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead based paints. Crystalline silica from bricks and cement and other masonry products. Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particals. From the Electrolux Group. The world s No.1 choice.
IPL, PC 18, , PC 18 Concrete Saw. Spare Parts. Piezas de repuesto. Pièces de rechange
IPL, PC 18, 2006-17, 542 20 10-13 PC 18 Concrete Saw Spare Parts Piezas de repuesto Pièces de rechange 542 20 10-13 542 19 10-12 - Large Target Logo Location: Rear of Cowl 542 18 97-32 - Small Target Logo
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationPRO 65 G Concrete Saw
IPL, PRO 65 G, 2005-16, 542 20 10-25 PRO 65 G Concrete Saw Spare Part Piezas de repuesto Pieces de rechange 542 20 10-25 Reference Information: Model No.: Serial No.: Date Purchased: NOTES: 2 CONTENTS
More informationDS 700 DS 800. Spare parts Pieces de rechange Piezas de repuesto IPL, DS 700 / DS 800, , HUSQVARNA CONSTRUCTION PRODUCTS
IPL, DS 700 / DS 00, 2007-49, 04 2 4-01 DS 700 DS 00 Spare parts Pieces de rechange Piezas de repuesto 04 2 4-01 HUSQVARNA CONSTRUCTION PRODUCTS Reference Information: Model No.: Serial No.: Date Purchased:
More informationMT (10/19/07) Rev. 02 PARTS MANUAL
MT1741210 (10/19/07) Rev. 02 PARTS MANUAL Table Of Contents PRODUCT COMPONENTS PAGES Engine... 4 Frame... 6 Drive... 8 Auger Housing... 10 Discharge Chute... 12 Handle Assembly... 14 Shift Yoke... 16
More informationParts Manual x x85. Models
Parts Manual Models 6271270x85 1741581 6271270x85 Auger Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 0011 4 Auger Housing REF NO PART NO. 480 1501211MA
More informationER48FX730VLCA ER52FX730VL ER52FX730VLCA
PARTS MANUAL ER48FX730VL ER48FX730VLCA ER52FX730VL ER52FX730VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
More informationFIGURE 1 - PARTS LIST: MK-2025SSP LPG CONCRETE SAW P/N
EXPLODED VIEW FIGURE 1 - PARTS LIST: MK-0SSP LPG CONCRETE SAW P/N 16893 19 1 3 0 1 13 17 1 1 10 11 16 9 6 3 8 18 7 1 PARTS LIST FIGURE 1 - PARTS LIST: MK-0SSP LPG CONCRETE SAW P/N 16893 1 BELT, BX3 1076
More informationPARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
More informationParts List. Model Reproduction. Not for Revision B
Parts List Model 1695539 1737492 Revision B Rev. Date 10/2009 Table Of Contents PRODUCT COMPONENTS PAGES Engine... 4 Frame... 6 Drive... 8 Auger Housing... 10 Discharge Chute... 12 Handle Assembly...
More informationWYS48FX730VLCA WYS52FX730V WYS52FX730VCA
PARTS MANUAL WYS48FX730VL WYS48FX730VLCA WYS52FX730V WYS52FX730VCA 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103 3 4
More information42B350Z PARTS MANUAL
4 2 B 3 5 0 Z PARTS MANUAL 64 56 68 2 48 45 30 47 62 26 38 7 35 33 65 43 42 6 16 26 40 31 1 23 14 5 16 19 36 21 20 27 28 24 26 66 22 44 28 29 28 68 34 30 29 32 39 13 17 14 15 12 5 3 4 57 55 54 61 59 60
More informationWYDB52CT810V34 WYDB52CT810V34CA PARTS MANUAL
WYDB52FR691V32 WYDB52FR691V32CA PARTS MANUAL WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
More informationSELF PROPELLED SAW SERIES PARTS LIST
C35 Series 08/2012 SELF PROPELLED SAW SERIES C35 VANGUARD GASOLINE SERIES Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationWYDB60FS691V34 WYDB60FS691V34CA WYDB52FR691V32CA WYDB52FX691V34CA WYDB60FX691V34 WYDB60FX691V34CA PARTS MANUAL
WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA WYDB60FX691V34
More informationMODEL NO REPAIR PARTS FRAME
FRAME 37 FRAME Key No. Part No. Description 90 198573X479 COVER, BOTTOM 91 198574 SCREW, 1/4--20X.63 103 406364X008 IDLER ASSEMBLY, AUGER 105 198576 PIN, HAIR.38DIAX1.64LG 106 198580 PIN, CLEVIS 3/16 DIA
More informationHydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationKey No. Part No. Description Key No. Part No. Description ENGINE
ENGINE 16 2 5 25-2 20 22 24 12 17 18 25-1 10 13 14 15 25-3 ÁÁ 6 4 11 7 23 8 25-2 20-5 25-4 9 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 2 - - -
More informationFIGURE 9 - PARTS LIST: MK-3024K CONCRETE SAW - P/N
FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 20 FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 IDENTIFYING 1 SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP 150774 2 2 GRIP, HANDLE, 1.0 ID 150842 2 3 WASHER, 3/8
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationTECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8
TECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8 IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS Deluxe Seat Adjustment Easy hand lever action allows forward and
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695821 (I1224E), 11.5TP 24" Dual Stage Snowthrower 1695842 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrowers Not for Reproduction
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationJOYSTICK STEERING CONTROL & RELATED PARTS (continued)
COUNTRY CLIPPER "ZETON BRAT" MOWER REPAIR S MANUAL COUNTRY CLIPPER " ZETON BRAT" ZERO TURN RADIUS MOWER TABLE OF CONTENTS PAGE... CONTENTS SECTION MOWER DECKS AND RELATED S.... " DECK ASSEMBLY.... " DECK
More informationPARTS MANUAL WYDB60FX691V34CA WYDB52FX691V34E
PARTS MANUAL WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrower. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695994 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrower Not for Reproduction Manual Part No. Revision - Rev. Date: 7/20/2011 Table
More informationASSY, CALIPER - LOADED AK150. Page 50 GEM Parts Catalog Section 5 - Brakes January 2009
4 5 6 2 0 9 3 7 8 ASSY, CALIPER - LOADED AK50 * PISTON, BRAKE CALIPER 2 *2 CALIPER, MACHINED INNER *3 CALIPER, MACHINED OUTER *4 PIN, COTTER - /6 X.0 LG ZINC PLATED 5 0522-00402 SCREW, SOCKET CAP HEAD
More informationEW32FS481V EW36FS481V EW48FS481V EW32FS481VCA EW36FS481VCA EW48FS481VCA
EW32FS481V EW36FS481V EW48FS481V EW32FS481VCA EW36FS481VCA EW48FS481VCA PARTS MANUAL ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE
More informationMK CX-3 GAS POWERED CONCRETE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK CX-3 GAS POWERED CONCRETE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space
More informationPARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011)
PARTS LIST Models Mfg. No. Description 1696060 MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011) Manual Part No. Revision A Rev. Date: 6/20/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handles
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationIPL, PP 418, , PP 418. Spare parts Pieces de rechange Piezas de repuesto HUSQVARNA CONSTRUCTION PRODUCTS
IPL, PP 1, 200-1, 10 02 9-01 PP 1 Spare parts Pieces de rechange Piezas de repuesto 10 02 9-01 HUSQVARNA CONSTRUCTION PRODUCTS A B Right REFERENCE DIAGRAM Top Front A D B E C F A Frame, Fuel Tank & Battery
More informationTable of Contents QUICK REFERENCE GUIDE FOR 52B25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...
B X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR BX...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE PARTS...F
More informationReproduction. Not for. Large Frame Dual Stage Snowthrowers. Parts Manual. Attachment
Parts Manual Attachment Large Frame Dual Stage Snowthrowers Mfg. No. Description 1695987 (L1528E), 14.5TP 28" Dual Stage Snowthrower 1695988 (L1730E), 16.5GT 30" Dual Stage Snowthrower 1695996 (L1428EX),
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationParts Manual WH3615/ WH4817/ WH5217/ English
Parts Manual WH6/66400 WH48/664002 WH2/66400 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2008 HTC. All rights reserved. Beatrice,
More informationTECHNICAL DATA BROCHURE ZTR 308/3II
Date 8/84 Page 1 of 6 TECHNICAL DATA BROCHURE ZTR 308/3II IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS. ' Seat Adjustment Loosen bolts on sliding brackets under each side of
More informationSERVICE SAW SERIES PARTS LIST C48 HYUNDAI GASOLINE SERIES
C48 Series 03/2011 C48 HYUNDAI GASOLINE SERIES Hyundai Gasoline Engine Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times.
More informationILLUSTRATED PARTS LIST
IPL MODEL STHM 71 72 1 7 7 ILLUSTRATED PARTS LIST 70 2 7 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STHM - 2CV with a serial number of 00001-0 SM-1A with a serial number of 001- SM-72A
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationTECHNICAL DATA BROCHURE ZTR 426
TECHNICAL DATA BROCHURE ZTR 426 Date 8/84 IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION. Page 1 of 6 Seat Adjustment Loosen bolts on sliding bracket under each side of seat, slide seat forward or
More informationWYS52FX730VCA FOR SERIAL NUMBERS U00681 AND ABOVE
PARTS MANUAL WYS52FX730V WYS52FX730VCA FOR SERIAL NUMBERS 201312U00681 AND ABOVE 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationParts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
More informationKey No. Part No. Description
ENGINE 2 6 20 25-3 25-2 Á Á 22 24 25-1 16 8 5 10 18 23 12 25-2 20-5 25-4 14 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description 2 - - - - - - ENGINE 3 002x97 BOLT, CARRIAGE 5/16-18 5
More informationMODEL S-32, 3200, ALL AMERICAN
MODEL S-32, 3200, ALL AMERICAN 1. 1 3201-7001 Chassis Weldment 2. 1 3204-7010 Bell Crank Weld 3. 1 3204-7009 Seconday Lift Weld 4. 1 3204-2018 Primary Lift Arm 6. 1 340-3025-S0 Seat Spring 6. 3 847-2803
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationENGINE. Ref. Drive Page. Ref. Auger Housing Page
ENGINE 16 2 1 5 25--2 20 22 24 12 17 18 25--1 10 13 14 15 6 25--3 4 7 11 23 8 25--2 26 25--4 9 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 1 6219
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,
More informationMfg. No: P216020KWV, 21" 6 TP Steel Deck Series
Parts Manual Mfg. No: 7800557 P216020KWV, 21" 6 TP Steel Deck Series Copyright Briggs and Stratton. All Rights reserved 28-Sep-2018 Model Components Table Of Contents Page Accessory Recycling Kits..............................................................................
More informationMK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
More informationENGINE 2 6 20 25 2 22 24 25 1 16 8 25 3 5 25 4 10 18 12 14 Ref.Drive Page Ref. Auger Housing Page 3 ENG100A 2 ENGINE 3 2x97 BOLT, CARRIAGE 5/16 18 5 28x76 RETAINER, PUSH 6 710026 NUT, HEXWDFLLK 5/16 18
More information4/08 revised 6/08 FORM NO
PARTS LIST American-Lincoln Models (): 56514750 (VD Gas), 56514851 (VD LP), 56514853 (VD Diesel), 56514855 (MD Gas), 56514856 (MD LP GM3.0L), 56514857 (MD Diesel S4Q2), 56514858 (VD LP) 4/08 revised 6/08
More informationPIÈCES DÉTACHÉES. Chasse-neige. Révision 10/
PIÈCES DÉTACHÉES Chasse-neige 555 860 Révision 10/2004 Y v a n B é a l - 2 1, a v. d e l A g r i c u l t u r e - B. P. 1 6 Z. I. d u B r é z e t - 6 3 0 1 4 C l e r m o n t - F e r r a n d C e d e x 2
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP
MODEL NO. -900 & UP MODEL NO. 00-900 & UP MODEL NO. 0-900 & UP MODEL NO. 0-900 & UP SKID SPRAYER FORM NO. 99-055 REV. B SET-UP AND PARTS LIST Refer to the illustrated Parts List for the details of parts
More informationPARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA
PARTS MANUAL ET60CT656SD ET60CT656SDCA ET72CT724RD ET72CT724RDCA 2 A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationWYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE
PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...
More informationTABLE OF CONTENTS PAGE NO. DESCRIPTION
P-11549 (3-9-07) TABLE OF CONTENTS DESCRIPTION PAGE 36" DECK AND RELATED PARTS 1 48" DECK AND RELATED PARTS CASTER WHEEL ASSEMBLY 3 DECK SPINDLE ASSEMBLY 4 DECK IDLERS AND RELATED PARTS 5 DRIVE LINE PARTS
More informationRC-200EX / RC-150EX Rim Clamp Tire Changer
RC-200EX / RC-150EX Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies as well as automotive and most light truck tire/wheel assemblies (holds 6 to 8-inch wheels for manual tire
More informationCross Reference Listing of Caterpillar parts to Kress parts for Kress 200C II Coal Haulers (Serial Numbers HND-M096, HND-M097, & HND-M098)
Cross Reference Listing of Caterpillar parts to Kress parts for Kress 200C II Coal Haulers (Serial Numbers HND-M096, HND-M097, & HND-M098) 0300167 RING BACKUP 222457 323180 BOLT HX HD.50-13NC 1.62GR8 211343
More informationSERVICE SAW SERIES PARTS LIST C44 KUBOTA DIESEL SERIES
C44 Series 03/2011 SERVICE SAW SERIES C44 KUBOTA DIESEL SERIES Kubota, Diesel Engine Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
More informationTable of Contents QUICK REFERENCE GUIDE FOR 48K19X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...
4 8 K 9 X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 48K9X...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE
More informationReproduction. Not for. Hybrid Frame Dual Stage Snowthrowers. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695984 (I924E), 9TP 24" Dual Stage Snowthrower 1695993 (H924RX), 9TP 24" Dual Stage Snowthrower (CE/Export) Hybrid Frame Dual Stage Snowthrowers Not for Reproduction
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationENGINE / MOTEUR Ref. Drive Page. Ref. Auger Housing Page
ENGINE / MOTEUR 1 16 2 17 5 27 27 12 18 25--2 20 22 24 13 15 25--1 6 25--3 4 21 7 11 25--4 10 8 25--2 9 Ref. Drive Page 3 Ref. Auger Housing Page 37 ENGINE / MOTEUR Key No. N o sur le schéma Part No. N
More informationTable of Contents QUICK REFERENCE GUIDE FOR 42K17Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...
4 2 K 1 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 42K1Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS... E - 1 CONTROL COMPONENTS
More informationTable of Contents QUICK REFERENCE GUIDE FOR 60K25X...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...
0 K X PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 0KX...A - DECK COMPONENTS...B - DECK LIFT COMPONENTS... C - FRAME COMPONENTS... D - DRIVE COMPONENTS...E - CONTROL COMPONENTS LINKAGE PARTS...F
More information2
PARTS MANUAL F48K17FC 2 CONTENTS FRONT CASTER ASSEMBLY... 6 DRIVE TIRE ASSEMBLY... 7 SEAT ASSEMBLY... 8 BRAKE ASSEMBLY... 10 FUEL ASSEMBLY... 12 DECK SUPPORT ASSEMBLY... 15 MAINFRAME ASSEMBLY... 17 TAIL
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationParts List for The 36 & 42 Wright Stander Mower (For Serial Numbers and Higher Until Superseded)
Parts List for The & Wright Stander Mower (For Serial Numbers 00 and Higher Until Superseded) Replace with newer revisions as they become available 00 Wright Manufacturing, Inc. All rights reserved Revised:
More informationTable of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS...
4 8 K 1 9 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS...E - 1 CONTROL COMPONENTS
More informationGEM Car Parts Direct
* * L0111-01163 ASSY, BRAKE PEDAL 05 1 * ASSY, SWITCH BRAKE (See following pages for breakdown of parts) 1 2 * ASSY, MASTER CYLINDER (See following pages for breakdown of parts) 1 3 0211-00116 WLDMT, BRAKE
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-1010 2 2 CARRIAGE WELDMENT 4-1114 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More information72B27LD PARTS MANUAL
7 2 B 2 7 L D PARTS MANUAL 6 MID-CUT SECTION 6 MID-CUT DECK ASSEMBLY 25 24 23 26 22 00 20 9B SEE NOTE A 9A 75 34 6 2 87 98 05 03 2 90 2 68 53 93 02 69 5 49 5 7 8 0 0 9 36 88 8 58 97 3 46 59 3 72 92 76
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationParts Manual P-ZT54 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual P-ZT54 / 9913402 Please
More information8 PARTS MANUAL 8.1 LIFT ASSEMBLY
8 PARTS MANUAL 8.1 LIFT ASSEMBLY 19 8.2 LIFT ASSEMBLY PARTS LIST ITEM QTY DESCRIPTION PART # 1 1 TOWER WELDMENT, POWER SIDE 4-0767 2 2 CARRIAGE WELDMENT 4-0778 3 8 GLIDE BEARING 2-0772 4 4 GREASE NIPPLE
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationBoxer 700HDX Parts Manual
BIG POWER IN ALL PLACES Phone: Sales - 800-831-0042, Parts and Service - 800-255-8839 www.boxerequipment.com Boxer 700HDX Parts Manual SN 5082 and Higher Part No. 76345-820 Manufactured by: Morbark, LLC.
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationClassic12 Belt Sander
Classic12 Belt Sander Section II Parts and Service Manual AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 21 Assembly Drawing #1 11/00 7 8 9 12 13 11 1 10 85 14 6 81 80 79 76
More informationParts Manual P-ZT4822 / P-ZT5224 / P-ZT6126 / P-ZT6128BS / P-ZT26 BF / P-ZT4822 CARB /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual P-ZT4822 / 966613301
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0
More informationPARTS ORDERING INFORMATION
RP-268 REPAIR PARTS FOR VE268 Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order and send
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: DM7, DM8, DM9 SECTION: 43 2501 Griffin Ave. Selma, AL 36703 (334) 872-6261 (334) 874-2700 Parts Ordering 1-800-304-2836 Fax 1-800-572-1784 www.bushhog.com
More information61 MID-CUT DECK ASSEMBLY
6 1 K 2 8 A PARTS MANUAL A A 102 101 100 103 99 83 97 61 34 93 12 86 123 2 74 124 55 56 92 48 5 7 8 10 84 9 36 73 95 3 31 58 76 62 59 22 27 64 44 43 87 17 1 13 35 31 41 40 26 24 91 55 48 23 22 59 21 31
More informationPRO HYDRO WALK BEHIND MOWERS MID-SIZE SERIES 3
Parts Manual for MID-SIZE SERIES 3 POWER UNIT MODELS SPLH153KW SPLH173KW MOWER MODELS SPA361 SPA481 SPA521 SPA611 McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED.
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE
More information