MK CX-3 GAS POWERED CONCRETE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

Transcription

1 MK CX-3 GAS POWERED CONCRETE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial Number is located on the Rear Crossbar SERIAL NUMBER: NOTE: For your (1) one year warranty to be effective complete the warranty card (including the Serial Number) and mail it in as soon as possible.

2 EXPLODED VIEW: MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 37

3 PARTS LIST: Item Description Qty MK p/n A Assembly, Frame 1 n/a A1 Casting, Frame, Right A2 Casting, Frame, Left A3 Support, Horizontal Frame A4 Connector, Tube 1 3/8 x 5/ A5 Screw, 5/16-18 x 1 ½ Hex Hd. Cap A6 Washer, 5/16 SAE Flat A7 Washer, 5/16 Split Lock A8 Wheel, Front, 4 X 1 ½ A9 Shim, ¾ x 1 ¼ x A10 Axle, Front A11 Bushing, Flange A12 Wheel, Rear, 8 X 2 ¼ A13 Pin, Cotter 1/8 x A14 Collar, Set ¾ B Assembly, Console 1 n/a B1 Console, Frame B2 Screw, 5/16-18 x 1 ½, Hex Head Cap B3 Washer, 5/16 SAE Flat B4 Washer, 5/16 Split Lock B5 Nut, 5/16 Hex B6 Label, Console C Assembly, Truck 1 n/a C1 Truck, Weldment C2 Plate, Serial Number C3 Label, CX C4 Tag, Serial Number, Blank D Assembly, Blade Shaft 1 n/a D1 Shaft, Blade, D2 Screw, Blade Shaft, ½-13 x 1 Hex Head, Left Hand Thread, Grade D3 Screw, Blade Shaft, ½-13 x 1 Hex Head, Right Hand Thread, Grade D4 Flange, Inner D5 Flange, Outer D6 Pulley, Polly-V 2 ½ x 1 x J D7 Bearing, 1 Pillow Block D8 Screw, 3/8-16 X 1 1/2 Hex Head Cap D9 Washer, 3/8 Split Lock D10 Washer, 3/8 SAE Flat D11 Nut, 3/8-16 Hex E Assembly, Shaft Cover 1 n/a E1 Casting, Cover, Shaft E2 Screw, 5/16-18 X 1 Hex Head Cap E3 Washer, 5/16 Split Lock E4 Washer, 5/16 SAE Flat MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 38

4 F Assembly, Blade Guard 1 n/a F1 Guard, DC Rear Blade DC F2 Fitting, Brass, 1/8 MNPT X 3/8 BARB F3 Screw, 3/8 X 2 ½ Socket Head Shoulder, w/ 5/16-18 Thread F4 Washer, 3/8 SAE Flat F5 Guard, DC Front Blade DC F6 Screw, 5/16-18 x ¾ Hex Head Cap F7 Washer, 5/16 Split Lock F8 Label, Caution, Lift Guard, 1.5 X F9 Label, Warning, Blade Failure, 1.5 X F10 Nut, 5/16-18 Nylock Hex G Assembly, Belt Guard 1 n/a G1 Casting, Guard, Belt G2 Guard, Inner Belt G3 Screw, 5/16-24 UNF X ½ Hex Head Cap G4 Washer, 5/16 Split Lock G5 Belt, Polly-V, 240J G6 Nut, ¼-20 Acorn, High Crown G7 Washer, ¼ Split Lock G8 Screw, ¼-20 x ½ Hex Head Cap G9 Washer, ¼ SAE Flat G10 Washer, ¼ Split Lock G11 Label, Caution, Guards in Place, 1.5 x H Assembly, Honda 6.5 H.P. Engine n/a H1 Honda GX200QXC9 6.5 hp w/ Cyclone Filter H2 Plate, Engine Bolt H3 Deflector, 8 hp H4 Screw, 6-32 x ½ Pan Head Phillips Self-Tapping Cap H5 Pin, Throttle Control H6 Screw, 8-32 x 3/8 Pan Head Cap H7 Pin, Cotter, 1/16 x ¾ H8 Oil Drain, Sub-assembly H9 Pulley, Polly-V, J16 x 2 ½ x 1.0 I.D H10 Screw, 5/16-18 x 2 Hex Head Cap H11 Washer, 3/8 SAE Flat H12 Washer, 3/8 Split Lock H13 Nut, 3/8-16 Hex H14 Arm, Tension H15 Nut, 5/ H16 Label, Caution, Hot Surface 1.5 x H17 Label, Warning, Refueling, 1.5 x H18 Label, Danger, California, 1.5 x H19 Label, Danger, Lethal Exhaust, 1.5 x H20 Plug, Plastic, ¾ Round H21 Plate, Engine Bolt, Front H22 Label, Home Depot Tool Rental H23 Label, Caution Belt Tension, 1.5 x H24 Label, Caution, Sparkplug, 1.5 x H25 Label, Caution, Hands and Feet, 2 X MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 39

5 J Assembly, Depth Control 1 N/a J1 Wheel, Depth Control J2 Screw, 3/8-16 X 1/2 Socket Head Set J3 Knob, Ball, 2, 3/8-16 Insert J5 Screw, 1/2 X 3/4 Socket Head Shoulder, w/ 3/8-16 X 5/8 Thread J6 Tube, Depth Control ¾ J7 Nut, 3/8-16 Nylock Hex J8 Screw, 3/8-16 X 2 Hex Head Cap J9 Bearing, Flange, FHSLF G J10 Screw, 3/8-16 X 1 ½ Hex Head Cap J11 Washer, 3/8 SAE Flat J12 Nut, 3/8-16 Nylock Hex J13 Screw, Depth Control J14 Nut, 3/4-10 Hex J15 Spring, Detent K Assembly, Handlebar 1 n/a K1 Handlebar K2 Grip, Handle K3 Tri-Knob, 3/8-16 X K4 Washer, 3/8 SAE Flat L Assembly, Pointer L1 Arm, Pointer L2 Pointer L3 Wheel, Pointer, w/ 3/8 X 1/2 X 1 5/8 nylon bushing L4 Screw, 1/4-20 X 3/4 Thumb L5 Nut, 3/8-16 Nylock Hex L6 Washer, 3/8 SAE Flat L7 Clip, Stop M Assembly, Water Valve M1 Bracket, Water Valve M1A Bracket, Water Valve OR M2 Screw, ¼-20 x ½ Hex Head Cap M3 Washer, ¼ Split Lock M4 Fitting, Brass, 1/2 MNPT X Garden Hose Swivel M5 Valve, Ball, Shut-Off, 1/2 FNPT X 1/2 FNPT M6 Nut, 1/2 NPT M7 Fitting, Brass, 1/2 MNPT X 3/8 BARB M8 Clamp, 5/8 Hose M9 Hose, 3/8 ID Vinyl N Assembly, Throttle, Honda 1 n/a N1 Screw, X 1/2 Pan Head Phillips Cap N2 Washer, #10 SAE Flat N3 Nut, Clip N4 Assembly, Throttle Control N5 Cable, Throttle, CX3 Honda NA Assembly, Throttle, Robin 1 n/a NA1 Screw, X 1/2 Pan Head Phillips Cap NA2 Washer, #10 SAE Flat MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 40

6 NA3 Nut, Clip NA4 Assembly, Throttle Control NA5 Cable, Throttle, CX3 Robin P Assembly, Wire Harness, CX3 Premium 1 n/a P1 Harness, Wire, CX3 Premium P2 Tachometer (redington) P3 Screw, 6-32 x 3/8, Pan Head Self Tapping P4 Switch, Engine On/Off PA Assembly, Wire Harness, Standard 1 n/a PA1 Harness, Wire, Standard PA2 Switch, Engine On/Off Q Assembly, Accessory Pack, 1 n/a Q1 Manual, Owner s Q2 Card, Warranty Q3 Tube, Owner s Manual Q4 Wrench, ¾, Open End R Assembly, Carton R1 Carton, Outer R2 Carton, Top Pad R3 Carton, Tray R4 Carton, Chock R5 Carton, Accessory Box R6 Carton, Bumper S Blades - - S1 MK-CX10, 12 x.100 x CX S2 MK-CX10, 14 x.100 x S3 MK-AX10, 12 x.100 x S4 MK-AX10, 14 x.100 x S5 MK-GX10, 12 x.100 x S6 MK-GX10, 14 x.100 x MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 41