TEST FACILITIES AT SQAE(GS), KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Nodal officer and contact No
|
|
|
- Noah Franklin
- 5 years ago
- Views:
Transcription
1 TEST FACILITIES AT, KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Testing Facilities Available Range of Test Eqpt. TEXTILE (MECHANICAL) 1 Yarn Strength Tester 5 Kg / 20 Kg 2 Vertical Cloth Testing Machine 450 N / 2,400 N 3 Tensile Strength Tester 200 N / 500 N variable RPM 4 Vertical Cloth Testing Machine 220 N/ 1,300 N 5 Fabric Strength Tester 3,100 N 6 Cloth Testing Machine 4,400 N 7 Tensile Strength Tester 500 N / 1,000 N 2,500 N/5,000 N variable RPM 8 Horizontal Tensile Tester 750 Kg variable RPM 9 Horizontal Cloth Testing Machine 14,000 N 10 Rope Testing Machine 39,000 N 11 Twist Tester Turns per metre Upto 50 cm length 12 Dial Callipers 200 mm 13 Digital Vernier Calliper mm 14 Digital Fabric Thickness Gauge 0-5 mm 15 Steel Scale 300 & 1000 mm 16 Counting Glass Threads/ 2.5 cm 17 Wrap Reel 100 Turns 112 m yarn 18 Dhona Balance g 19 Table Top Scale Up to 50 Kg. 20 Sungle Pan Balance gm 21 Waterproofness Testing Appts Upto 90 cm water head 22 Bundesmann Water Repellency Appts 4 samples at a time 23 Cone Test 8 Nos at a time 24 Pressure Head Test Apparatus 76 mm Hg water Head 25 IJIRA Moisture Meter 1-18 % MR 26 Conductivity Meter ppm RUBBER & LETHER (MECHANICAL) 27 Tensile Testing Machine 0 15 Kg 0 30 Kg 0 75 Kg Kg Rate of Traverse 5, 30 & 50 cm/min 28 Ross Flux Testing Machine 100 cycles/min 29 De Mattia Flexing Machine 300 ± 10 flexing/min 30 Permanent Set Apparatus 5 test specimens at a time 31 Digimatic Height Gauge mm 32 Wallace Compression Set Apparatus Single specimen & 8 specimens at a time
2 Name of Estt with address, Name of RUBBER & LETHER (MECHANICAL) 33 Din Abrasion Resistance Testing Single Specimen Machine 34 Dial Thickness Gauge 0 10 mm (LC 0.01 mm) 0-50 mm (LC 0.01 mm) 35 Digital Thickness Gauge for Leather 0 10 mm (LC mm) 36 Mechanical Convection Hot Air Oven 0 250º C 37 Hot Air Ageing Oven 38 Dial Calliper mm (LC-0.01mm) mm (LC-0.01mm) 39 Micrometer mm (LC-0.01mm) 0-25 mm (LC-0.01mm) 40 Rubber Hardness Tester (Shore-A) Shore-A 41 Wash Wheels 12 Tumbler 16 Tumbler 16 Tumbler 42 Perspirometer 14 Samples at a time 43 Economy Incubator 0 100º C 44 Colour Matching Cabinet 8 different Light Source 45 Crockmeter 1 Sample at a time 46 Rub Fastness Tester 1 Sample at a time 47 Lux Meter Lux value 48 Single Pan Digital Balance 300 gms 49 Physical Balance 10 Kg 50 Sole Adhesion Tester N 51 Cold Chamber 0 to ( ) 40º C GENERAL STORES (MECHANICAL) 52 Vickers Pyramid Hardness Tester Kg 53 Rockwell Hardness Testing Machine B Scale 100 Kg 1/16" Ball/Rockwell C Scale 150 Kg Ball/Rockwell Hounsfield Tensometer Type V (0 62.5), (0 125) (0 250), (0 500) (0 1000), (0 2000) Kg 55 Large Tool Maker Microscope 0 360º 0 25 mm
3 Name of Estt with address, Name of GENERAL STORES (MECHANICAL) 56 Hydraulic Pressure Tester 0 70, 0 50, 0 10 Kg/cm 2 57 Bursting Strength Tester 0 3.5, 0 14, 0 28 Kg/cm 2 58 Hand Cap Anemometer 0 30 m/s 59 EEL Light Master Photometer 0 10, , Lune/Sq ft 60 Simens Flicker Photometer Upto 250 Cd 61 Simens Photometer 62 DP-I Mini-processor in a box 63 Timber Moisture meter 0 30 % % 64 Shock Absorption Test Apparatus NA 65 Rigidity Test Apparatus NA 66 Penetration Test Apparatus NA 67 Harness Test Apparatus NA 68 Microscope 69 Digimatic Micrometer 0-25 mm 70 Dial Caliper mm 71 Dial Caliper mm 72 Digital Vernier Caliper mm 73 Digital Vernier Caliper mm 74 Central Lethe Machine - 75 Drilling Machine ¾" 76 Sieve Shaker 4 Sieves 77 Scroll Fret Saw Machine 610 mm 78 Centrifugal Steel Plate Blower 79 Air Compressor 4.2 Kg per cm² 80 Air Oven 250º C 81 Digital Hot Air Oven 300º C 82 Power Saw Machine Semi Hydraulic for Lethe Machine 83 Single Pan Digital Balance 0-5 Kg(LC-0.5) gms (LC-0.001) TEXTILE & RUBBER LEATHER (CHEMICAL) 84 ph meter Lovibond Comparator Mechanical Shaker 13 Holders Variable RPM 87 Nitrogen Assembly (Kjeldahl s Apparatus) 88 Rubber Hydrocarbon Assembly 89 Compound Microscope Magnification X 5X, 10X, 20X, 40X 90 Projection Microscope
4 Name of Estt with address, Name of TEXTILE & RUBBER LEATHER (CHEMICAL) 91 Muffle Furnace O C 92 Water Bath 93 Single Pan Balance Digital gm 94 Soxhlet Extraction Heater 6 heaters 95 Cold Water circulating System 10 O C 96 Hot Air Oven O C 97 Millipore Water Purification System Flow rate 30 l/hr. 98 Vacuum Pump GENERAL STORES (CHEMICAL) 99 ph meter Electro Deposition Analyser Upto 100% content 101 Strohlein Apparatus 0 1.5% 102 Muffle Furnace Upto 1200º C 103 Digital Hot Air Oven Upto 250º C 104 Single Pan Electronic Balance gm 105 Rotary Vacuum Pump PAINTS (CHEMICAL) 106 Spray Gun 1 Litre (Max) 107 Spray Gun 0.5 Litre (Max) 108 Oven Ambient to 300º C 109 Oven Ambient to 300º C 110 Hot Air Oven Upto 600º C 111 Accelerated Weather Equipment 38 44º C RPM Fineness of Grind Gauge 0 to 5 H & 6 to 5 H 113 Corrosion Cabinet 42 48º C HD-100% 114 Microscope 115 Binocular Microscope Ten Times (x10) 116 Scratch Test Apparatus 100 1,500 g 117 Wet Film Thickness Gauge Upto Cryptometer 0 50 mm 119 Abel Flash Point Apparatus 65º C (Max) 120 Bend Test Apparatus NA 121 Metal Pycknometer NA 122 Impact Tester º C 123 Falling Ball Impact Tester 2 lb, dia 2 3 /8 " Dist 8' (Min) 124 Falling Ball Impact Tester 10.5 Ib ±10% 125 Flow Cup No ml (Max) 126 Digital Gloss Meter With 45º & 60º Head 0 to 100 AMIL (Brand) 127 Film Applicator NA 128 Muffle Furnace Upto 1200º C
5 Name of Estt with address, Name of Nodal officer and contact No PAINTS (CHEMICAL) 129 Centrifuge Upto 4,000 rpm 130 Centrifuge 6,000 rpm (Max) 131 Analytical Balance 1 to 200g (Accuracy 0.01 g) 132 Bottle Shaking Machine 1 6 Bottle CHEMICAL TESTING 133 ph meter Digital Hot Air Oven º C 135 Drying Oven (Round) º C 136 Incubator 25 80º C 137 Abel Flash Point Apparatus 50º C 138 Refractometer (Abbe) Electronic Analytical Balance 220 g (Accuracy 1 mg) 140 Distillation Apparatus 141 Rotary Vacuum Pump 142 Muffle Furnace Upto 900º C DRUGS (CHEMICAL & BIOLOGICAL) 143 Disintegration Test Apparatus 6 Tabs at a time 144 Tablet Disintegration Tester 1 tab at a time 145 Auto Titrator ph Polarimeter 1 sample at a time 147 Melting Point Apparatus º C 148 UV Cabinet for Thin Layer Chromatography 254 and 365 nm 149 UV -- Visual Spectrophotometer UV-vis/ 1, nm 150 Nephlo Turbidity meter 0 1,000 NTU 151 Incubator 0 85º C 152 BOD Incubator 0 50º C 153 Vacuum Oven Press 0 30" Hg 154 Adco Vertical Autoclave 4.2 Kg /sq cm 155 Horizontal Laminar Flow Air flow press = 0.45 to.55 mps Air Flow vel = 15mm 156 Bio Sheild Fumigator NA 157 Rotary Horizintal Shaker 158 Centrifuge m/c 159 Muffle Furnace º C 160 Thermostatic Water bath (SS)
6 Name of Estt with address, Name of Nodal officer and contact No Srl.No Testing Facilities Available Range of Test Eqpt PETROLEUM PRODUCTS (CHEMICAL) 161 Tintometer Lovibond 162 Saybolt Chromo meter + 7 to Lovibond Comparator Viscometer Bath (Oil) º C 165 Viscometer Bath (Water) 0 50º C 166 Viscometer Bath (Oil) 0 50º C 167 Viscometer Bath (Oil) 0 100º C 168 Smoke Point Apparatus 0 40 mm 169 Rams Bottom Carbon Residue Bath 550º C 170 Mechanical Grease Worker 60 st/min (60 to 10,000) 171 Penetrometer Hot Air Oven 300º C 173 Incubator 37 45º C 174 Drop Point Apparatus 0 250º C 175 Wheel Bearing Apparatus 176 Corrosion Preventive Apparatus NA 177 Evaporation Loss Apparatus NA 178 Residue on Evaporation Bath 160º C & 0 5 lb/sq. inch 179 COC Flash Point Apparatus Upto 350º C 180 Abel s Flash Point Apparatus 181 Rust Preventive Apparatus 182 Freezing Point Apparatus 60ºC 183 Foaming characteristics Apparatus 24 O C & 93.5 O C 184 Emulsion & frothing Apparatus 185 Muffle Furnace 1000 O C 186 Copper Strip Corrosion bath Upto 100º C 187 Silver Strip Corrosion bath Up to 50 O C 188 Analytical Balance Up to 200g. 189 Distillation Apparatus Up to 400 O C
Asian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
Index for Labs under Civil Engineering
Index for Labs under Civil Engineering Sr. No. Laboratory Name 1 Applied Mechanics Laboratory- 1 2 Transportation Engineering Laboratory 3 Surveying Laboratory 4 Environmental Engineering Laboratory-2
IEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
FECR. World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments
FECR World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments Bursting Strength Testing Humidity Chamber / Conditioning Chamber Bursting Strength is reliable index of the strength
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
A.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
DEPARTMENT OF CIVIL ENGINEERING SCHOOL OF ENGINEERING GAUTAM BUDDHA UNIVERSITY
DEPARTMENT OF CIVIL ENGINEERING SCHOOL OF ENGINEERING GAUTAM BUDDHA UNIVERSITY LIST OF LABORATORIES IN CED S.N LAB NAME LAB Non Teching Staff Lab in charge o. NO 1 Soil Mechanics lab AP-104 Mr. Anuj Yadav
Hi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)
Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall
Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
INDEX FOR PRICE LIST
S.NO. DESCRIPTION PAGE S.NO. DESCRIPTION PAGE NO NO (A) (M) 1 Abbe Refractometer 2 1 Melting Point Apparatus 10 2 Abbe Refractometer Spares 2 3 Abel Flash Point Apparatus 9 (B) INDEX FOR PRICE LIST 1 Butyroo
PRICE SCHEDULE FOR LABORATORY EQUIPMENT Goods and related Services offered within Sri Lanka (in Sri Lankan Rupees)
PRICE SCHEDULE FOR LABORATORY EQUIPMENT 1 2 3 4 5 6 7 8 9 10 11 Goods and related Services offered within Sri Lanka (in Sri Lankan Rupees) Line Department of Chemistry (Faculty of Natural Science) per
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
Khushboo Scientific Private Limited
+91-8048602052 Khushboo Scientific Private Limited https://www.indiamart.com/khushbooscientific/ We are a distinguished Importer, Distributor, Exporter of Scientific. These products find application in
DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.
DMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)
DMS - 9202 (STOCKPILE STORAGE) EFFECTIVE DATES: AUGUST 2004 APRIL 2010. 9202.1. Description. This Specification governs for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile
Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily
Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
Date and Time of Pre Bid Meeting November 22, 2016 at a.m
Addendum No. 0 TENDER FOR SUPPLY, DELIVERY, INSTALLATION AND COMMISSIONING OF EQUIPMENT FOR LATEX TECHNOLOGY LABORATORY OF FACULTY OF ANIMAL SCIENCE AND EXPORT AGRICULTURE Tender No - UWU/B/C/6/09 Date
Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
UGANDA NATIONAL BUREAU OF STANDARDS NATIONAL METROLOGY LABORATORY
CALIBRATION CHARGES Page 1 of 5 In the derivation of calibration charges a number of factors have been taken into consideration. These include the following; 1. Personnel Salaries and man-hours for calibration
Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
CARBON & SULPHUR APPARATUS
CARBON & SULPHUR APPARATUS The determination of carbon and Sulphur contents in iron & steel has become an absolute necessity for all chemical and metallurgical laboratories. Iron & steel plants, Foundries
Faculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III
. (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis
POLARIMETERS SPARES/ACCESSORIES FOR POLARIMETERS
MODEL INSTRUMENT WITH SPECIFICATION PRICE POLARIMETERS RSP-1 Rajdhani Polarimeter(220 mm) with Sodium Lamp 31,875.00 Assembly & Choke RSP-2 Rajdhani Sodium Lamp Assembly 11,565.00 RSP-3 RSP-4 RSP-5 Rajdhani
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
Specifications of Products
ations of Products General Purpose Oil : White Mineral Oil Kinematic Viscocity 15/4 cst 40 HP-080 0.875 7.85 180 78-25.0 Lubricants and petrochemical applications, textile HS-080 0.864 8.56 158 60-35.0
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Shriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
Accurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
KOLHAPUR FOUNDRY & ENGINEERING CLUSTER
KOLHAPUR FOUNDRY & ENGINEERING CLUSTER With reference to 24 th April 2016 Tender Notice published in Maharashtra Times & Times of India for GSR, Water Tank, Screw Compressor, LPG system, Lab testing equipments
Accurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
Ref:CL/Mech./ Cal /BID-01(13-14) Date: 10 July 2013
Ref:CL/Mech./ Cal /BID-0(3-4) Date: 0 July 203 SUBJECT: Procurement of Calibration Services for the Equipments in Central Laboratory (Mechanical). Dear Sirs, Technical & Commercial Bids are invited for
cycling
www.motipcycling.com www.lubeca.n cycling CHAIN SPRAY SPORT Lubricant with ceramic particles to treat chains and gear wheels of bikes. Chain spray sport has a very low friction factor for minimal resistance,
ASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
SECTION 916 (Pages ) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS
916 BITUMINOUS MATERIALS. (REV 7-28-03) (FA 1-13-04) (7-04) SECTION 916 (Pages 785-797) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS 916-1 Superpave PG Asphalt Binder: 916-1.1
Environmental/Analytical LabCivil Engineering Lab Equipment
DIGITAL PH METER Display : 3.5 Digit LED. Range : ph 0 to 14.00, mv 0 to ± 1999. Resolution : ph 0.01, mv 1. : ph ± 0.01, mv ± 1 mv. Temp. Compensation : Auto 0 to 100 deg. C., Manual 0 to 100 deg. C.
Ball-on-Three Disks Test Machine
Ball-on-Three Disks Test Machine Suitable for testing: A test method using this test configuration is currently under review within the Diesel Fuel Subcommittee of ASTM Committee D2 on Petroleum Products
PERFORMANCE ACCESSORIES PERFORMANCE ACCESSORIES. G au g e s. M u d f l a p s
PERFORMANCE ACCESSORIES PERFORMANCE ACCESSORIES G au g e s C e n t r a l Locking Kit B l a d e s And Scrapers S t y lu s And Nitto Tape M u d f l a p s 207 Mini Mechanical Gauges 1.5 Mechanical gauges
Calitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
The Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
ASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
Special Provision No. 111S12 July 2017
AMENDMENT TO OPSS 1103, NOVEMBER 16 Special Provision No. 111S12 July 17 OPSS 1103, November 16, Material Specification for Emulsified Asphalt, is deleted in its entirety and replaced with the following:
Accessories for Force Test Stands, Universal Testers and Tensile Testers
Accessories for Force Test Stands, Universal Testers and Tensile Testers Compatible with: Fixtures, General, Page 1 MT-500 MT-1500 MT-2500 PEEL TEST FIXTURE, 180 DEGREE, ASTM D-903 Force Test Stand Universal
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt
MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1103 NOVEMBER 16 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
Introduction. MRP Group of Companies. MRP AutoRub. Our Contacts. MRP AutoRub Private Limited. Our Management Team
Introduction Pvt Ltd situated in Chennai, India was started in the year 1979 as a manufacturer of Moulded Rubber Components like O Rings, Rubber Pad and has become the specialist and market leader in manufacturing
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
uridongne co,. ltd. uridongne co., ltd. Industrial Lubricants
Industrial Lubricants uridongne co,. ltd. Lubricant Research Institute #40 Galji-ro, Namsan-myeon, Gyeongsan-si, Gyeongsangbuk-do, 38573, South Korea TEL : +82-53-857-5900 FAX : +82-53-851-7116 www.euridongne.com
Tex-614-J, Testing Epoxy Materials
Overview Effective: August 1999 May 2000. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification DMS-6100, Epoxies and Adhesives. The test to be
CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
LIST OF ASSETS FOR DISTRIBUTION TRANSFORMERS PROPOSED FOR TENDER SALE SR. NO. 1 No.
LIST OF ASSETS FOR DISTRIBUTION TRANSFORMERS PROPOSED FOR TENDER SALE SR. NO DESCRIPTION QTY PICTURE ABB CORE WRAPPER To make Wound cores for transformers Range 5 KVA to 750 KVA. The ABB Core Wrapping
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
ICL Calibration And Testing Services, SCO - 37, Ground Floor, Sector-12, Panchkula, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 09.12.2016 Page 1 of 8 I. DIMENSION (Basic Measuring, Gauge etc.) 1 LENGTH GAUGE/SETTING ROD $ Up to 100 mm >100 mm to 500 mm 1.5 µm 7.20 µm Using ULM, Gauge Block grade- 0 & Electronic
CODE DESCRIPTION QUANTITY
ANNEX AGRI/ 11 A- Pesticides 05-11-00001 Insecticides Karate 5 % 15,000 Lt 05-11-00002 Insecticide, winter oil (spindle oil) 16,000 Lt 05-11-00003 Fungicide Raxil DS2 64,000 Kg 05-11-00004 Fungicide Ridomil
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Rough Hey Road Grimsargh Preston PR2
Atut Sp. z o.o. INDUSTRIAL FILTRATION INDUSTRIAL FILTRATION PAGES. Dystrybucja:
industriefiltration_engl_02 07.02.2006 14:15 Uhr Seite 77 K TECHNICAL FILTER PAPERS, PLAIN AND EMBOSSED 78-79 K TECHNICAL FILTER PAPERS, CREPED 80 K TECHNICAL FILTER BOARDS 81 K FILTER DISCS 82-84 K ABSORBENT
ENGINE MEASUREMENTS ENGINE MEASUREMENTS AND SPECIFICATIONS CYLINDER HEAD. Measure Cylinder Compression. Using Telescoping Gauges and Hole Gauges
ENGINE MEASUREMENTS AND SPECIFICATIONS Tool List Qty. Required Compression Gauge, 20 kgf/cm²: E-Z-GO Part No. N/A... 1 Compression Gauge Adapter, M14 1.25: E-Z-GO Part No. N/A... 1 Valve Seat Cutter, 45-35
DMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)
Asphaltic Concrete Patching Material (Stockpile Storage or Bagged) Effective Date: May 2017 1. DESCRIPTION This Specification governs for crushed stone asphaltic concrete intended primarily as a cool-
ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 NOVEMBER 07 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04 DESIGN
Specifications for lab instruments
P2/97/16-17 07.01.2017 Sir, Sub: E- tender for supply of Lab equipments- regarding E Tender is invited for the supply of Lab equipments Specifications for lab instruments 1. Hot air oven with NABL t raceable
BUREAU OF INDIAN STANDARDS (Western Region Office, Mumbai) DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS. Our Ref: DDGW Sectt(PCO/RD) 23 Jan 2014
BUREAU OF INDIAN STANDARDS (Western Region Office, Mumbai) DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref: DDGW Sectt(PCO/RD) 23 Jan 2014 Sub: Preparation & review of draft manuals for product
L U B R I C A N T S & MATERIALS
PRODUCT GUIDE L U B R I C A N T S & MATERIALS TRUSTED BRANDS ERACHECK CFC-Free Oil-in-Water Testing by QCL-IR Technology Ultimate high-speed, precision solution for low, and sub- ppm concentrations of
Additin RC 9305 Additive Package
Technical Data Sheet Additin RC 935 Additive Package Type Ashless multifunctional oxidation, rust and wear inhibiting additive package - for antiwear hydraulic fluids according to: DIN 51524, part 2 and
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
Beaker, Heavy Wall; Kimax Graduated, with spout. 5 9 9 95 0 0 00 ml 00 ml 000 ml 000 ml 000 ml $.90 $8.5 $9. $9. $8. $. Beaker, Standard; Kimax Graduated, with spout. 0 5 0 05 0 88 89 90 9 07 9 08 09 0
Laboratory Equipment. Tel: +44 (0) u Fax: +44 (0) u
Laboratory Equipment 78 Load Measurement 78 Drying and Weighing 79 Test Sieves 80 Sieve Shakers 81 Laboratory Hardware 82 Glass and Plastic Ware 82 Temperature Measurement 82 General 85 Mobile Laboratories
Tex-614-J, Testing Epoxy Materials
Overview Effective Date: January 2001 - July 2002. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification "DMS-6100, Epoxies and Adhesives." The
Automotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
ASTM Aviation (Turbine) Jet Fuel Sample ID: JF1211
ACID NUMBER D3242 Report result to the nearest 0.001 mg KOH/g Acidity BOCLE (LUBRICITY) D5001 Report result to nearest 0.01 mm Fully-automatic WEAR SCAR DIAMETER (WSD) Semi-automatic WEAR SCAN DIAMETER
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
MAPÚA INSTITUTE OF TECHNOLOGY STANDARD PRACTICE GUIDE
DEPARTMENT: SPG NO: DATE ISSUED: SUPERSEDES: Institutional Laboratory Management Office SUBJECT: ILMO-05-02 July 1, 2013 ILMO-05-01 EECE-EELAB-02-01 Policies and Guidelines on Repair, Preventive Maintenance,
Test Methods & Procedures Spec Numbers Description
METHODS & PROCEDURES Test Methods & Procedures Test Methods & Procedures Spec Numbers Description Air Release Value Minutes to 0.2% air @ 50 Aniline Point Anti-Wear Vane Pump Test 250 hours, 140 bar @
MANATEC. Service Equipment & Tools. for Two Wheeler & Three Wheeler Workshop.
MANATEC TM Partners in Progress Service Equipment & Tools for Two Wheeler & Three Wheeler Workshop www.manatec.in Three Wheeler Lift (Electro Hydraulic) Model : ME - TWL (Floor Plate) Lifting of Three
Darryl R. Rose VP Marketing Energex Inc.
Darryl R. Rose VP Marketing Energex Inc. Drose@energex.com QA Overview A QA program starts at the front end and continues throughout the entire process: Every raw material supplier is qualified prior to
MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 FEBRUARY 1996 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT 1103.01 SCOPE 1103.02 REFERENCES 1103.03 Not Used 1103.04 Not Used 1103.05 MATERIALS
Penetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
File No: 7(600)/2016/Pur Date:
File No: 7(600)/206/Pur Date: 09.06.207 Revised Technical Specification issued after the Pre-Bid Conference for Bio-Diesel Plant using Leather Fleshing Waste, Chamois Leather, Fish Oil and Slaughter House
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY CONTROL SERVICES, INC. 2340 SE 11 th Avenue Portland, OR 97214 George Cahill Phone: 503 236 2712 CALIBRATION Valid To: September
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
CLASS II BIOSAFETY CABINET
PRODUCT CATALOG CLASS II BIOSAFETY CABINET www.biolabscientific.com CLASS II BIOSAFETY CABINET Biolab Biological Safety Cabinet Class II Series is engineered specifically for laboratory operations that
Faculty of Mechanical Engineering B.E. Marine Engineering (R 2013) Semester III FLUID MACHINERY LABORATORY
Faculty of Mechanical Engineering B.E. Marine Engineering (R 23) Semester III MV63 MARINE HYDRAULICS AND FLUID MACHINERY LABORATORY Requirements for a batch of 30 students FLUID MECHANICS LABORATORY. 2.
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
TEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
General Apparatus. Petroleum Products Timers Clamps Frames Laboratory Jacks Set-up Frame Set.
Set-up Frame Set Lab-Chron Timer Lab-Line presents a wide variety of high quality general laboratory apparatus to compliment our line of constant temperature products. Choose corrosion-resistant alloy
RANDO HDZ. Rando HDZ, our premium, zinc additized, anti-wear hydraulic oil that helps provide you with:
HYDRAULIC OILS RANDO HDZ The demands on your equipment, time and bottom line multiply daily. Rando HDZ helps keep your equipment operating longer, faster and harder, allowing you to extend the time between
DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
THE INDUSTRY AT CROSSROADS
THE AUTOMOTIVE INDUSTRY AT THE CROSSROADS 2008 REGISTRATIONS TOTAL COUNTRY FLEET ---- 5.9 MILLION CARS & LIGHT TRUCKS ----- 2.556 MILLION BUSES & HEAVY TRUCKS 353 THOUSAND MOTORCYCLES ----------------
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at