CARBON & SULPHUR APPARATUS
|
|
- Juliana Armstrong
- 5 years ago
- Views:
Transcription
1 CARBON & SULPHUR APPARATUS The determination of carbon and Sulphur contents in iron & steel has become an absolute necessity for all chemical and metallurgical laboratories. Iron & steel plants, Foundries and forging units etc. There is a substantial saving of time in a short time. The dual determination is excellently suitable for Routing analysis. (Different Range of Carbon Burette Available (0.25%, 0.5%, 1.5%, 4.5%) To work on 220 / 230 volt A.C Supply. We reserve the right to change the Design and specifications without Prior notice
2 DIGITAL MUFFLE FURNACE The Furnace outer body is made of thick Mild Steel Sheet reattached with perforated sheet on the bottom portion and painted with attractive Power Coated Paint. Inner chamber made of ceramicc grooved Tile Set, heating elements are made of Kanthal A 1 wire in coil form U Shape, insulation by ceramic Fiber Wool heat resistance, Temp. Controlled by Digital Temperature Controller fitted in front base of the Furnace with L & T Contactor and Cr / Al Thermocouple. To work on 220 / 230 volt A.C Supply. AVAILABLE IN DIFFERENT SIZE INNER CHAMBER SIZE RATING Max. Temp. Working Temp. 4 x 4 x KW 1200 Deg. C 700 to 1100 Deg. C 6 x 6 x KW 1200 Deg. C 700 to 1100 Deg. C 8 x 8 x KW 1200 Deg. C 700 to 1100 Deg. C 12 x 12 x KW 1200 Deg. C 700 to 1100 Deg. C NOTE: High Temp. Furnace, upto C is also available We reserve the right to change the Design and specifications without Prior notice
3 HOT AIR OVEN Double Walled with two adjustable Shelves, inside made of thick Aluminium or Stainless Steel & outside of Mild Steel Sheet finished in Durable White Powder Coated Paint. The gap between two walls is filled with Pure Glass Wool to minimize loss of temperature. Temperature can be controlled by Digital Temp. Controller or Thermostate. Different type of Temp. Range available C, C, C, C. Air Circulating Fan can be provided on request AT AN EXTRA Cost. Inner Chamber Size 14 x 14 x x 18 x x 24 x 24 Power Supply Single Phase Single Phase Single Phase Digital Control Thermostatic Control We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
4 LABORATORY DISC PULVERSIER Laboratory Pulveriser is a Disc type grinder, especially designed to grind virtually material (Sponge Iron / Concrete / Iron Ore) to produce a fine mesh sample. It is self contained grinder with a rotary disc, having a planetary movement in a vertical plane. Grinding is done in between two discs one stationary and the other revolving eccentrically at high speed. A self locking device holds the hinged. Disc Diameter 175mm Max. Feed size Upto 6mm Discharge Size 100 Mesh Approx. Electricc Motor 3 hp 3 Phase We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
5 LABORATORY JAW CRUSHER This machine specially design for crushing Iron Ore, Sponge Iron, coal and Concrete for preparation of Sample in lab testing. Sponge Iron / Iron Ore Coal / Concrete Jaw Size 4 x 6 6 x 8 8 x 12 4 x 10 6 x 12 8 x 16 Feed Size 25 30mm 45 50mm 65 70mm 25 30mm 45 50mm 65 70mm Discharge Size 6 20mm 10 22mm 12 25mm 6 20mm 10 22mm 12 25mm Motor 3 hp 5 hp 10 hp 3 hp 5 hp 10 hp Motor RPM 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm Power Supply 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
6 LABORATORY HOT PLATE This hot plate is very useful for continuous heating Upto maximum C Rectangular plate of cast iron Machined to a smooth & leveled surface having Insulated elements is fitted on a robust mild steel body enamel painted. Temp. Controlled by Thermostate [50 0 C to C]. To work on 230 volts A.C complete with cord & plug. AVAILABLE IN DIFFERENT SIZE SIZE RATING 10 [W] x 12 [L] x 6 [H] 1000 Watt 10 [W] x 16 [L] x 6 [H] 1200 Watt 12 [W] x 18 [L] x 6 [H] 2000 Watt 18 [W] x 24 [L] x 6 [H] 3000 Watt (Hot Plate Rectangular) This Round Shape Hot Plate is very useful for heating upto C. Body of the plate is made of mild steel sheet Enamel painted. The top of the plate is of 8 Diameter with Energy Regulator Dia : 8 Round (Hot Plate Round) We reserve the right to change the Design and specifications without Prior notice
7 MAGNETIC STIRRER & HEATING MANTLE Outer Body made of Mild Steel Powder Coated with Stainless Steel Top. Stirring And Heating Units Are Properly Insulated with Heating System, Temp. Is Controlled by an Energy Regulator, Electronic Speed Controller and Teflon Coated Paddle, Heating System Capacity 2 Ltr / 5 Ltr / 10 Ltr / 20 Ltr Power Supply Single Phase Temp. Range Upto 75 0 C Magnetic Stirrer With three heat control and energy regulator. Capacity : 500ml, 1 Liter, 2 Liter, 3 Liter, 5 Liter, 10 Liter, Power Supply Single Phase Temp. Range Max C ` Heating Mantle We reserve the right to change the Design and specifications without Prior notice
8 WATER DISTILLATION UNIT This apparatus is used for Distilled Water, Outer Body made of Stainless Steel [SS 304 Grade with Organ Welding] with electric Cord, Socket & Plug. Wall Mounting Type Table Pattern Type Water Capacity 3 / 4 Ltr Per Hour 6 Ltr Per Hour 8 / 9 Ltr Per Hour Load 3 K.W 4 K.W 9 K.W Power Supply Single Phase Single Phase Three Phase Wall Mounting Type Table Pattern Type We reserve the right to change the Design and specifications without Prior notice
9 SPECTRO POLISHING MACHINE This machine is very useful for preparation of Spectro sample very fast and clean. Outer body Made of thick M.Steel sheet with powder coated rust proof paint. Aluminium Oxide Disc 350mm Dia Available in 60 Grit and 120 Grit. Magnetic Holder also available for Micro Sample Motor for Disc Motor for Blower 2hp 3 phase 1 hp 3 phase Disc Size 350mm [14 ] Motor RPM ON / OFF Switch LOAD on Disc 2800 / 1440 rpm L & T Make Upto 1 Kg We reserve the right to change the Design and specifications without Prior notice
10 ABRASIVE CUT OFF MACHINE The chop type cut off wheel machine is suitable for quick and clean cutting of metallographic specimen from rods & tubes etc. Abrasive cutter is rugged, sturdy and designed to cut Metallurgical Samples to optimal quality consistently and safely. Cutting Wheel spindle is connected with motor shaft by pulley and belt mechanism. The movement of cutting wheel towards the specimen is applied by handle fixed with motor base pivot spindle and the cutter unit is balanced by springs for smooth chop type movement. SENIOR MODEL JUNIOR MODEL Cutting Cap. 3 Round 2 Round Coolant Tank 50 Ltr 30 Ltr Coolant Pump Tullu Type [Heavy] Tullu Type Electric Motor 5 hp Three phase 3 hp Three phase Cutting Wheel 250/300mm Dia 200/250mm Dia Motor (rpm) 2800 rpm 2800 rpm Vice Four side Movable Two side Movable We reserve the right to change the Design and specifications without Prior notice
11 METALLURGICAL POLISHING MACHINE Metallographic specimen polishing machine is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallographic structure of specimen under microscope. Double Disc Polishing Machine Single Disc Polishing Machine Electric Motor ½ hp + ½ hp ½ hp Motor RPM 1440 rpm 1440 rpm Power Supply Single Phase Single Phase Disc Dia 8 Round with S.S. Wash Basin Double Disc Single Disc We reserve the right to change the Design and specifications without Prior notice
12 DIGITAL BOMB CALORIMETER Used for determination of heat combustion of organic Matter and calorific value and sulphur content of coal, Solid and Liquid Fuels. The Bomb has a capacity of 300ml approx. a provided with a high Pressure Schroder valve. Tested as per the requirement of Institute of Petroleum. Supplied with, Bomb Calorimeterr Vessel with bomb support, Water Jacket, combined lid for calorimeter Vessel and PUF Jacket, stirrer, connecting leads, connecting Tube to Connect Bomb and pressure Gauge. Connecting Tube with fine Adjustment valve to Connect Pressure Gauge and Oxygen Cylinder pressure gauge on stand, spanner for Oxygen Tube Connection, Ignition Wire (2metres) Nicrome, Cotton Reel, Stand For unit, pellets press, Digital Beckman Thermometers O Ring small, O ring for Stirrer, Valve for Bomb and Valve Key. Supplied Without oxygen cylinder. To work on 220 / 230 volt AC Supply. NOTE: Bomb Calorimeter with Printer also avaialble at an Extra Cost We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
13 WEIGHING BALANCES Chainometic Balance Single Pan Balance Plaform Balance Digital Top Loading Balance TYPE Digital Top Loading Single Pan [Electrical] Chainometic Double Pan [Manual] Platform Balance CAPACITY 220gm 200gm 200gm READABILITY 0.001gm [3 Digit] gm [4 Digit] 0.1mgm 0.1mgm 60Kg to 500Kg 5gm to 50gm To Work on 220 / 230 volt AC Supply MAKE Shimazdu / Excel Leader / Dhona Leader / Dhona Excel We reserve the right to change the Design and specifications without Prior notice
14 HOT MOUNTING PRESS Metallurgical Mounting Press is designed for permanent mounting of metallographic or rock specimen in thermosetting plastic, we offer Bakelite Mounting Press. The Unit of a rugged construction and is activated by a hydraulic press, capacity 10 tones. The unit is provided with a pressure gauge to read the pressure being applied while mounting. The Press is supplied complete with Mould Heater, cooler and Thermometer. As a standard outfit, 25mm dia. NOTE: Mould assembly is supplied with machine, other sizes if mould assembly can be supplied as additional accessories at an extra cost. Mould diameter 25 / 32 / 40mm Hydraulic Jack 10 TONE Temperature Range 0 to 300 Deg. C Power Supply Single Phase. We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
15 LABORATORY ROLL CRUSHER This Crusher specially designs for crushing Sponge Iron, coal and Concrete for preparation of Sample in lab testing. Roller Size 4 x 8 4 x 10 6 x 10 6 x x 12 Feed Size 10mm 12mm 15mm 17mmm 20mm Discharge Size 2mm or above 2mm or above 2mm or above 2mm or above 2mm or above Motor 3 hp 3 hp 3 hp 5 hp 5 hp Motor RPM 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm Power Supply 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
16 LABORATORY BELT GRINDER Linisher is a continuous belt grinder. When the sample irregular, its surface needs leveling in order to render it suitable for mounting. This is achieved on Linisher belt. The Linisher consist of a continuous emery belt of size 4 width. The Belt travels on two aluminium pullies, one of which is directly coupled to motor. The other pulley is fitted on a spindle in a dolley which is spring loaded thus offering quick changing of worn out belts. The design also incorporate axial adjustment to align the belt in proper position. Emery Belt Size 100 x 915mm Electric Motor Working Area ½ hp Single Phase 4 x 7 Approximately We reserve the right to change the Design and specifications without Prior notice
17 THERMOCOUPLES / CABLES / INDICATORS & CONTOLLERS TYPE TEMP. RANGE J Type Upto C K Type Upto C R Type 13% Upto C R Type 17% Upto C Thermocouples Cable for Thermocouples [PVC / Asbestos / Fiber Glass / Steel Breaded] Temp. Controller PID Controller Non Contact Temp. Gun We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
18 THERMOMETERS/HYDROMETERS We reserve the right to change the Design and specifications without Prior notice
19 BAROMETERS BAROMETER [DIAL TYPE] FORTIN BAROMETER (Mercury) DIGITAL BAROMETER We reserve the right to change the Design and specifications without prior notice com
20 B.O.D INCUBATOR (Low Temp.) Most versatile for Biochemical Oxygen Demand (BOD) determinations. Double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. The gap of 75 mm between the outer and the inner wall is fitted with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulatic fans for maintaining temperature uniformity throughout the chamber. Temperature From 5 0 C to 50 0 c is controlled by Micro Processor Digital Temperature Indicator-Cum- Controller with an accuracy of ± 0.1 C. To work on 220/230 A.C. supply Single Phase. NOTE: Automatic Voltage Stabilizer 3 KVA At an Extra Cost INNER CHAMBER SIZE CAPACITY 450 x 600 x 400mm (18 x 24 x 16 ) 4 Cu ft (113 Ltr.) 500 x 850 x 425mm (20 x 34 x 17 ) 6.1 Cu ft (172 Ltr.) 575 x 875 x 550mm (23 x 35 x 22 ) 10 Cu ft (283 Ltr.) 650 x 900 x 550mm (26 x 36 x 22 ) 12 Cu ft (339 Ltr.) We reserve the right to change the Design and specifications without prior notice kishorelab@gmail.com, kishorinter@yahoo. com
21 HUMIDITY CHAMBER Suitable for carrying out different quality control tests under Controlled conditions of temp. & humidity. Inner chamber consist of S.S. and outer wall of M.S sheet duly powder coated. The gap of 75mm between the outer and inner wall in filled with special grade glass wool / puf insulation to prevent Thermal losses. A self cooler air circulating fan is fitted to maintain uniform temp. And humidity Conditions throughout the chamber Temp. range from 5 0 C above ambient to 60 0 C is controlled by Digital Temp. & Humidity Controller with an accuracy of +2%. Humidity is controlled through an HUMIDISTATT thus controlling the desire set humidity range from Atmospheric humidity to 90 0 C C. NOTE: Cooling facility also available at an extra cost. To Work on 220 / 230 volt A.C Supply INNER CHAMBER SIZES 455 [W] x 710 [H] x 455mm [D] 605 [W] x 605 [H] x 605mm [D] 605 [W] x 910 [H] x 605mm [D] We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
22 Ph / CONDUCTIVITY / TDS / TURBIDITY METER Ph METER [Table Model] Ph METER [Pen Type] TDS METER [Table Model] TDS METER [Pen Type] CONDUCTIVITY METER [Table Model] TURBIDITY METER We reserve the right to change the Design and specifications without prior notice
23 SALT SPRAY CHAMBER FRP Chamber Salt Spray Acrylic Sheet Chamber FEATURES Wall Inner Chamber Outer Chamber Temp. Control Humidity Humidity Controller Temp. Accuracy Humidity Accuracy Inner Chamber Size Test Standard Power Supply FRP / SS SALT SPRAY ACRYLIC SHEET SALT SPRAY Double Walled Single Walled FRP / S.Steel Acrylic Sheet Mild Steel Painted Acrylic Sheet Ambient to 65 0 C Upto 30 0 C 95% to 99% 90% to 95% Fitted C + 3% RH NIL C + 5% RH 800 x 550 x 550mm 680 x 410 x 410mm Customize Customize 220 / 230 volt 50Hz 220 / 230 volt 50Hz We reserve the right to change the Design and specifications without prior notice kishorelab@gmail.com, kishorinter@yahoo..com
24 WATER BATH Double walled with inner chamber made of S.S Sheet and outside of M.S. duly powder coated. The gap between the walls is filled with special Grade glass wool in order to avoid thermal loses. A drain plug is also fitted to the unit. The Inner chamber fitted with immersions type heating element is covered with perforated Removable diffuser tray. The cover is provided with the unit as a standard accessory. Temp. From ambient to C is controlled by Digital Temperature Controller. NOTE: Water circulating pump an extra cost. / stirrer at To work on 220/230 volt A.C supply. DIGITAL Double Walled with inner chamber made of S.S Sheet and outside of M.S duly powder coated. Temperature controlled by Thermostatic controller. AVAILABLE INNER CHAMBER SIZES 300 x 250 x 100mm 6 Hole of 75mm dia 405 x 355 x 100mm 12 hole of 75mm dia THERMOSTATIC We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
25 CROSS HATCH CUTTER Cross Hatch cutter is suitable for checking adhesion of coating by cross cut method. This cutter having single cutting blades. Test is carried out by performing crossed cuts at right angle. After clear with Adhesionm Tape or brush. Can be used in accordance to ASTM D 3359 and IS mm x 11 Blades 2mm x 6 Blades 3mm x 5 Blades Coating Upto 60 Micron Coating Upto 61 Micron to 120 Micron Coating Upto 120 Micron to 250 Micron We reserve the right to change the Design and specifications without prior notice
26 PENCIL HARNDESS TESTER Pencil Hardnerss Testert is suitable to determine the resistance of coating materials to scratch effect on the surface. Can be used in accordance to ASTM D 3363 and IS 101. In the test pwncils of various degrees of hardness are moved over the surface under a fixed pressure and angle to the surface. The degree of hardness of the pencil which damages the surface is taken as a measurement of scratch hardness. AVAIALBLE RANGE OF PENCIL: 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 3H, and 4H We reserve the right to change the Design and specifications without prior notice
27 CONICAL MANDREL TESTER Conical Mandrel is used for determination of extensibility of painted Panels, which are clamped, is Position & Formed round the Conical Mandrel by rotating of the roller frame. The 200mm Mandrel tapers from 37mm to 6mm diameter which can be measured with the help of scale. After test the panels are examined to determine Minimum diameter at which failure by elongation occurs. Can be used in accordance to ASTM D 522 and ISO We reserve the right to change the Design and specifications without prior notice
28 COATING THICKNESS GUAGE INDIAN DEFELSKO USA PENCIL TYPE TYPE BASE RANGE Coatmeasure M2 Coatmeasure C Coatmeasure M & C DEFELSKO USA Pencil Thickness Guage Ferrous Model Micron Non Ferrous Model Micron Ferrous & Non Ferrous Micron Ferrous Model Micron Micron / Micron We reserve the right to change the Design and specifications without prior notice kishorelab@gmail.com, kishorinter@yahoo. com
29 TUBULAR IMPACT TESTER Many surface coating are subject to the risk of damage by Impact. Impact Tester allow reproducible condition of Impact to be defined. The instruments consist of a graduated vertical tube mounted into a solid base. This tube act as a guide for an impacting weight of pre determined mass. The height from this falls is variable. Standard Tube Length 25 and 40 Different Weight 2 LB, 4 LB and 6 LB We reserve the right to change the Design and specifications without prior notice
30 PORTABLE GLOSS METER Compact, portable, sensitive & accurate handy instrument, battery operated for the measurement of different geometry 45 degree, 60 degree, 85 degree. Suitable to check gloss value of curved as well as flat surfaces, tiny and large objects. Portable Gloss Meter with a Micro Controller base display and rechargeable batteries. Unit is small and light weight HOLD Facility We reserve the right to change the Design and specifications without prior notice
31 Available 210 Shads in the form of different sizes. RAL K7 RAL K5 RAL K1 SHADE CARD 5 Colors per page Fan Deck Size 1.97 x 5.9, Color Sample 1.97 x.79 Gloss Well Suited for Color Combination & Comparison Full Page Color Sample 1.97 x 5.9 Semi Matte or Gloss U Shaped Protective cover 16 Colors per page Booklet Size 4.09 x 7.48, Color Sample 1.1 x.71 Gloss RAL SHADE CARD PANTONE SHADE CARD Pantone provides an accurate method for selection, specification. Available in Solid uncoated and solid coated. Each colour identify by unique Pantone names and number. We reserve the right to change the Design and specifications without prior notice
32 COLOUR MATCHING CABINET This Color comparison light Cabinet is suitable to stimulate different lighting condition & obtain an objective assessment of colour. Fluorescent artificial day light Incandescent tungsten filament lamp Ultra violet black light lamp TL 84 Cool White Fluorescent Inner Chamber Size Power Supply 28 x 20 x 16 Approx. Single Phase We reserve the right to change the Design and specifications without Prior notice
33 TUMBLER DRUM It shall consist of a Circular Drum of 1000mm inside dia and 500mm inside length and shall be Constructed of Mild Steel plate at Least 5mm thickness. The Drum shalll be replaced whenever the thickness of the plate is produced by angle lifter 50 x 50 x 5mm shall be solidly attached longitudinally over the entire length of the inner side of the Drum by riveting in such manner as to prevent a accumulation of material between the lifter and the drum. The light of the drum axis shall not be more than 700mmm from the floor. Motor 1.75 hp Gear Motor Drum RPM 25 or 26 rpm Motor RPM 1440 rpm Power Supply 3 Phase We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo..com
34 ROTAP SIEVE SHAKER The Gyratory Sieve Shaker is Durable Constructed suitable for 6 No. of 12 Dia & 18 Dia Sieves with Lid and Receiver. Running parts operate under Oil, Machine is easily installed reproduced the circular and the tapping motion with a mechanical action. NOTE: 1. Different Size of Test Sieves also available AT AN Extra Cost. 2. Timer also available At an Extra Cost To Work on 220 / 230 volt A.C Supply Electric Motor Power Supply RPM 0.75 hp Single Phase 1440 rpm. We reserve the right to change the Design and specifications without Prior notice
35 CRUCIBLES PLATINUM CRUCIBLE & LID NICKEL CRUCIBLE & LID VOLATILE MATTER CRUCIBLE & LID SILICA CRUCIBLE & LID PARTICULAR Platinum Crucible Nickel Crucible V M Crucible Silica Crucible CAPACITY 10ml, 25ml, 50ml 25ml, 50ml, 100ml 15ml 25ml, 50ml, 80ml We reserve the right to change the Design and specifications without Prior notice kishorelab@gmail.com, kishorinter@yahoo. com
36 LAB SOLVENTS & GLASSWARES We reserve the right to change the Design and specifications without Prior notice com
U tube viscometer. Kinematic viscosity bath RASAYAN
Viscosity The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. For liquids, it corresponds to the informal notion of "thickness". For example,
More informationIEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
More informationEnvironmental/Analytical LabCivil Engineering Lab Equipment
DIGITAL PH METER Display : 3.5 Digit LED. Range : ph 0 to 14.00, mv 0 to ± 1999. Resolution : ph 0.01, mv 1. : ph ± 0.01, mv ± 1 mv. Temp. Compensation : Auto 0 to 100 deg. C., Manual 0 to 100 deg. C.
More informationHA Thickness Gauge IS:2386 (part 1)- 1963
AGGREGATE TESTING HA50.05 Mechanical Rotating Sample Divider (Motorised) IS : 1607-1960 For obtaining representative sample for sieve analysis. It is suitable for dry sands, fine powders, ores, refractory
More informationTender No. CL1 GEOTECHNICAL ENGINEERING LAB. CIVIL ENGINEERING DEPT.
Tender No. CL1 GEOTECHNICAL ENGINEERING LAB. CIVIL ENGINEERING DEPT. I. EQUIPMENT/ASSESSORIES/GOODS FOR GEOTECHNICAL ENGINEERING LABORATORY A. LIST OF ITEMS &APPROVED MANUFACTURERS/SUPPLIERS Sr. No Equipment/Apparatus/Accessories/Goods
More informationFECR. World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments
FECR World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments Bursting Strength Testing Humidity Chamber / Conditioning Chamber Bursting Strength is reliable index of the strength
More informationLaboratory Equipment. Tel: +44 (0) u Fax: +44 (0) u
Laboratory Equipment 78 Load Measurement 78 Drying and Weighing 79 Test Sieves 80 Sieve Shakers 81 Laboratory Hardware 82 Glass and Plastic Ware 82 Temperature Measurement 82 General 85 Mobile Laboratories
More informationINDEX FOR PRICE LIST
S.NO. DESCRIPTION PAGE S.NO. DESCRIPTION PAGE NO NO (A) (M) 1 Abbe Refractometer 2 1 Melting Point Apparatus 10 2 Abbe Refractometer Spares 2 3 Abel Flash Point Apparatus 9 (B) INDEX FOR PRICE LIST 1 Butyroo
More informationDate and Time of Pre Bid Meeting November 22, 2016 at a.m
Addendum No. 0 TENDER FOR SUPPLY, DELIVERY, INSTALLATION AND COMMISSIONING OF EQUIPMENT FOR LATEX TECHNOLOGY LABORATORY OF FACULTY OF ANIMAL SCIENCE AND EXPORT AGRICULTURE Tender No - UWU/B/C/6/09 Date
More informationKOLHAPUR FOUNDRY & ENGINEERING CLUSTER
KOLHAPUR FOUNDRY & ENGINEERING CLUSTER With reference to 24 th April 2016 Tender Notice published in Maharashtra Times & Times of India for GSR, Water Tank, Screw Compressor, LPG system, Lab testing equipments
More informationTEST FACILITIES AT SQAE(GS), KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Nodal officer and contact No
TEST FACILITIES AT, KOLKATA LAB STORES DTE Name of Estt with address, Name of Srl.No Testing Facilities Available Range of Test Eqpt. TEXTILE (MECHANICAL) 1 Yarn Strength Tester 5 Kg / 20 Kg 2 Vertical
More informationThe Safest Heating Method!
ACE Instatherm For Glass Vessels The Safest Heating Method! Borosilicate Glass Eliminate the need for heating tapes, immersion heaters and heating mantles. Instatherm is a safer, more precise heating method
More informationInstatherm ACE. The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and heating mantles P.
ACE For Glass Vessels Borosilicate Glass Fused-to-Glass Conductive Heating Film Integral Outer Insulation Instatherm The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and
More informationCassia Siamia BLOOD BANK REFRIGERATED CENTRIFUGE MP 6000 R. Technical Data (MP 6000 R)
BLOOD BANK REFRIGERATED CENTRIFUGE The range of Blood component separation equipment and Hi-Volume Centrifuges are designed for Blood bags, large capacity centrifuge tubes and bottles. These centrifuges
More informationTechnosys Blood Bank Refrigerator
Technosys Blood Bank Refrigerator BBR-350 Bags BBR-250 300 Bags Shelves of BBR Handle of BBR The chamber is to be constructed in double wall. The interior of the chamber is to be made of Stainless Steel
More informationADVANCED. DIGIPREP Programmable Fully Automatic Metallography Grinder & Polisher
DIGIPREP 251 ADVANCED DIGIPREP preparation systems are designed for fully automated materialographic sample preparation for consistent and reproducible specimen quality. DIGIPREP s variable speed base
More informationInstatherm ACE. The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and heating mantles.
ACE For Glass Vessels Borosilicate Glass Fused-to-Glass Conductive Heating Film Integral Outer Insulation Instatherm The Safest Heating Method! Eliminate the need for heating tapes, immersion heaters and
More informationEquipment. QualiCut QualiMount QualiPol
Equipment QualiMet materials preparation equipment is reliable and affordable perfect for your metallographic laboratory. QualiCut QualiMount QualiPol Welcome Inspect & Protect The material preparation
More informationPOLARIMETERS SPARES/ACCESSORIES FOR POLARIMETERS
MODEL INSTRUMENT WITH SPECIFICATION PRICE POLARIMETERS RSP-1 Rajdhani Polarimeter(220 mm) with Sodium Lamp 31,875.00 Assembly & Choke RSP-2 Rajdhani Sodium Lamp Assembly 11,565.00 RSP-3 RSP-4 RSP-5 Rajdhani
More informationShaking Incubators & Shakers
Shaking Incubators & Shakers Bench Top Shaking Incubator LBSI Series Bench Top Shaking Incubator provides a controlled environment for continuous growth of biological organisms. LBSI Series has a wide
More informationIndex for Labs under Civil Engineering
Index for Labs under Civil Engineering Sr. No. Laboratory Name 1 Applied Mechanics Laboratory- 1 2 Transportation Engineering Laboratory 3 Surveying Laboratory 4 Environmental Engineering Laboratory-2
More informationGLASSCO LABORATORY EQUIPMENTS PVT. LTD.
PROGRAMMED FOR PRECISIO N GLASSCO LABORATORY EQUIPMENTS PVT. LTD. STAINLESS STEEL TOP Magnetic Stirrer with Hotplate - Analog Aluminium Moulded Construction Easy temperature & Stir controls Installed with
More informationLAB EQUIPMENTS. Manufacturing & Servicing of:
Manufacturing & Servicing of: LAB EQUIPMENTS OVERHEAD STIRRER MAGNETIC STIRRER LAB OIL BATH LAB OIL BATH WITH MAG. STIRRER TEMPERATURE CONTROLLER MULTI CHANNEL TEMP. INDICATOR LAB CENTRIFUGE We Service
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationRefrigerators/Freezers
Explosion-Proof, Corrosion-Resistant Refrigerator Flammable Material Storage Refrigerator/Freezer Laboratory Freezer Lab-Line offers a complete line of refrigerators and freezers to accommodate virtually
More informationSpecifications for lab instruments
P2/97/16-17 07.01.2017 Sir, Sub: E- tender for supply of Lab equipments- regarding E Tender is invited for the supply of Lab equipments Specifications for lab instruments 1. Hot air oven with NABL t raceable
More informationOPERATING INSTRUCTIONS. Models SI-1400 through SI-1406
INCUBATOR-GENIE TM OPERATING INSTRUCTIONS Models SI-1400 through SI-1406 U.S. PAT 5,918,979 80 Orville Drive, Suite 102, Bohemia, NY 11716 U.S.A. Phone: (631) 567-4700 Fax: (631) 567-5896 Toll Free: 888-850-6208
More informationBOHLENDER GmbH Phone: +49(0)9346 / Fax: +49(0)9346 / Internet:
Internet: www.bola.de E-Mail: info@bola.de BOLA-Flat Flange Distillation Apparatuses made of Fluoroplastic () with SAFE LAB-System 5 9 Suitable for the distillation of strong alkaline or acid products
More informationTECHNICAL SCOPE OF SUPPLY
TABLE OF CONTENTS 1.0 GENERAL DATA 2.0 MAIN FRAME 3.0 MAIN SHAFT 4.0 ADJUSTMENT RING 5.0 HEAD 6.0 BOWL 7.0 CLAMP RING 8.0 ECCENTRIC 9.0 SOCKET 10.0 COUNTERSHAFT 11.0 CRUSHER HYDRAULIC SYSTEM AND SETTING
More informationTo, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION
Page - 1 To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Dear Sir, We are pleased to enclose our offer for the following machines :- Draw Bench Semi Duty Twin HP 30 RPM 1500 (60' X
More informationCORRECT HANDLING OF FLEXIBLE ABRASIVES
L E T T H E S P CONTENTS Page III, IV V - VII CORRECT HANDLING OF FLEXIBLE ABRASIVES OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF FLEXIBLE ABRASIVES 4, 5 WHEEL LABEL MARKINGS 6, 7 USE
More information** you can select your inner chamber material either aluminium Or Stainless steel. * Complete unit in 304 grade stainless steel on request.
These are suitable for preservation of vaccines, insulin, liver extracts, chemicals etc. and to make biochemical oxygen demand determination. It is made up of double walled M.S. Sheet finished with epoxy
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationGRINDING & POLISHING FORCIPOL FORCIMAT
GRINDING & POLISHING FORCIPOL FORCIMAT MODULAR CONFIGURATION GRINDING & POLISHING MACHINE FORCIPOL 102/202 FORCIMAT 52/102 The FORCIPOL Series grinding and polishing machines offer practical and economical
More informationFoaming of Lubricating Oils (manual)
Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine
More informationPolishing machines range
MACHINES Polishing machines range Presi has developed a new complete range of polishing machines for all materials applications. From single sample to large production PRESI gives you the best solution.
More informationAccurate to 0.1 NIST Traceable Advanced PID Algorighm USB Port Free datalogging/control software. Controllers I N S C O N TA G N
Accurate to 0.1 NIST Traceable Advanced PID Algorighm USB Port Free datalogging/control software Controllers P 2010 C O N TA R I C I I N S G N Serving the laboratory glassware industry for over 70 years
More informationAUTOMATIC VOLUMETRIC FILLING MACHINE, FILLING RANGE 250ml TO 5 Ltrs. & 5 Ltrs. To 20 Ltrs..
An ISO 9001 : 2008 UNITECH AUTOMATIC VOLUMETRIC FILLING MACHINE, FILLING RANGE 250ml TO 5 Ltrs. & 5 Ltrs. To 20 Ltrs.. Drip free nozzles with filling range of 250ml to 5000ml/5Ltrs. to 20 Ltrs. with drip
More informationBoekel Complete Culture Control Incubators
Boekel Complete Culture Control Incubators Continuing the Tradition of Quality and Performance Today, continuing in the tradition of making quality incubators for your culturing, incubation, and heating
More informationPenetration. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationRockers &Shakers Shakers
Rockers &Shakers Shakers Shakers are ideal for almost any vessel from microcentrifuge tubes through petri dishes and microtitre plates to conical flasks. Shakers are available with either an orbital action
More informationTex-614-J, Testing Epoxy Materials
Overview Effective: August 1999 May 2000. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification DMS-6100, Epoxies and Adhesives. The test to be
More informationISO 9001, ISO1400, ISO13485, CE and WHO-GMP certified.
ISO 9001, ISO1400, ISO13485, CE and WHO-GMP certified. Environmentally friendly Ultra Deep Freezer, -40 degree powered by Meditech Technology for safe storage. Stable Temperature Control Temperature is
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationLaboratory Clamps & Supports
Laboratory Clamps & Supports Multi-Purpose Clamps Specialty Clamps Clamp Accessories Connectors & Holders Lab-Frames Support Stands & Plates Safety Equipment Lab-Lifts Flow Control MULTI-PURPOSE UltraJaws
More informationThermo Scientific Variomag Magnetic Stirrers
Thermo Scientific Variomag Magnetic Stirrers Wear-free operation for peace of mind Reliability, safety and performance for stirring applications of Thermo Fisher Scientific Thermo Scientific Variomag Stirrers
More informationLaboratory Clamps & Supports
By Laboratory Clamps & Supports Multi-Purpose Clamps Specialty Clamps Clamp Accessories Connectors & Holders Lab-Frames Support Stands & Plates Safety Equipment Lab-Lifts Flow Control MULTI-PURPOSE UltraJaws
More informationVessels and Distillation Equipment
Vessels and Distillation Equipment 147 A suitable solution for practically every application in well-known BOLA-quality and optimally adapted to your needs. PRODUCT TIPS BOLA Scrubber Columns Pressure:
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationFURNACES. Includes Gas Flowmeter and Manifold! F (15) 73 FB cu. ft. (45)
Selection Guide MUFFLE (WITH CONTROLLER) Working Temperature Range Chamber Volume Type F C cu. in. (l) Page Thermolyne Quality - Low Price! FB1300 212-2012 100-1100 76 (1.3) 66 FB1400 212-2012 100-1100
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationFile No: 7(600)/2016/Pur Date:
File No: 7(600)/206/Pur Date: 09.06.207 Revised Technical Specification issued after the Pre-Bid Conference for Bio-Diesel Plant using Leather Fleshing Waste, Chamois Leather, Fish Oil and Slaughter House
More informationFor the Professional/Contractor Flap Discs for Angle Grinders
Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and
More informationABOUT. In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery.
ABOUT US In 1973 Baertec Machinery took its place in Bursa Industry by producing Aluminium and Pvc & Metal Processing Machinery. In 1973 Baertec Machinery took its place in Bursa Industry by producing
More informationCAPACITOR DISCHARGE STUD WELDING SYSTEMS
CAPACITOR DISCHARGE STUD WELDING SYSTEMS ARE complete stud welding systems which weld CD studs using the CD stud welding process. CONSIST OF the following items: A CD stud welding Power Supply/Controller
More informationSMALL CONSTRUCTION EQUIPMENTS
SMALL CONSTRUCTION EQUIPMENTS SR NO CONCRETE MIXERS 1 [CM-1] FULL BAG CONCRETE MIXER WITH MECHANICAL HOPPER MOUNTED ON [500 19] TYRES CONCRETE MIX 200 LTS A] 6 HP AIR COOLED DIESEL B] 3PH 5 HP ELECTRIC
More informationGeneral Apparatus. Petroleum Products Timers Clamps Frames Laboratory Jacks Set-up Frame Set.
Set-up Frame Set Lab-Chron Timer Lab-Line presents a wide variety of high quality general laboratory apparatus to compliment our line of constant temperature products. Choose corrosion-resistant alloy
More informationLUBRICATING GREASES. Test Methods
LUBRICATING GREASES s Page Evaporation Loss of Lubricating Greases and Oils ASTM D972, D2878; IP 183; FTM 791-351...148 Evaporation Loss of Lubricating Grease Over Wide Temperature Range ASTM D2595, D2878...149
More informationMachines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight
44 Dough Dividing & Moulding Machine Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight precision, solid design,
More informationQH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
More informationAGGREGATE TEST EQUIPMENTS
CONTENTS CONTENTS Aggregate Crush ng Value Apparatus 6 D g tal Po nt Load Tester 14 Aggregate Impact Value(AIV) Apparatus 6 M cro Deval Test ng Mach ne 15 R ffle Boxes ( Sample Spl tters ) 7 Laboratory
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING
More informationMAINTENANCE STANDARDS TABLE
TABLE 4 MAINTENANCE STANDARDS TABLE Unit: mm [in.] ( Maximum rpm, (no-load) Minimum rpm, (no-load) According to engine specification Adjust governor setting. Compression pressure MPa (kgf/cm 2 ) [psi]
More informationONTENTS. CONTENTS Page CORRECT HANDLING OF GRINDING WHEELS
C O M E T L E T T H E S P A R K S F L Y ONTENTS CONTENTS Page III, IV V - VII CORRECT HANDLING OF GRINDING WHEELS OTHER ACTIVITIES 2, 3 GRINDING MACHINES AND STANDARD TYPES OF ABRASIVES 4, 5 WHEEL LABEL
More informationCompetence in Plastic Labware
Competence in Plastic Labware material separation 86 www.vitlab.com Measuring and transferring Measuring scoops, PP White. Also suitable as weighing scoops. With precision formed filling edge and comfortable,
More informationISO 1716 INTERNATIONAL STANDARD. Reaction to fire tests for building products Determination of the heat of combustion
INTERNATIONAL STANDARD ISO 1716 Second edition 2002-02-01 Reaction to fire tests for building products Determination of the heat of combustion Essais de réaction au feu des produits de construction Détermination
More informationCeramics for pyrometers, furnace construction & laboratory ware. Schunk Ingenieurkeramik
Ceramics for pyrometers, furnace construction & laboratory ware Schunk Ingenieurkeramik Advantages High dimensional tolerance Very good thermal shock resistance Chemical corrosion resistance High heat
More informationdial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
More informationSalt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371
Salt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371 Specification/Model SS600e CASS/AASS SS1000e CASS/AASS SS1300e CASS/AASS SS3000e CASS/AASS Chamber Temperature Range Ambient + 9
More informationGeneral Equipment. Content - Section 8. Grease Nipples. Grease Equipment. Garage Equipment. Coils, Plugs & Sockets. Electrical Cable.
8 General Equipment Content - Section 8 Grease Nipples Grease Equipment Garage Equipment Coils, Plugs & Sockets Electrical Cable Test Kits Tube Cutter Flaring Tool 8.1 General Equipment Grease Nipples
More informationPRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES
WATER METERS VALVES & COCKS PRESSURE GAUGES DIAL THERMOMETERS PRESSURE & TEMP. SWITCHES PRESSURE & TEMP. TRANSMITTERS PIPES, PIPE FITTINGS & FLANGES FILTER, REGULATOR & LUBRICATORS W IKA V I INSTRUMENTS
More informationCLEANING, INSPECTION AND REPAIR. Valve Spring Compressor (Part No. HD-34736B) Figure Compressing Valve Springs
b0134x3x 5694 8 7 12 10 1 6 13 11 Valve Spring Compressor (Part No. HD-34736B) 9 Figure 3-11. Compressing Valve Springs 5 14 4 3 2 15 2767a 1. Right crankcase half 2. Pin (2) 3. O-ring (2) 4. Plate 5.
More informationAUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405
AUTOMATIC FILM APPLICATOR AB3120, AB3220, AB3320, AB3400, AB3125, AB 3225, AB3325, AB3405 PRODUCT DESCRIPTION The TQC Automatic film applicator provides a reliable basis to apply coating films to test
More informationKhushboo Scientific Private Limited
+91-8048602052 Khushboo Scientific Private Limited https://www.indiamart.com/khushbooscientific/ We are a distinguished Importer, Distributor, Exporter of Scientific. These products find application in
More informationHeat Exchangers. Evaporator Catalogue
Heat Exchangers Evaporator Catalogue Version 30: January 2015 Heat Exchangers Thermocoil Catalogue V30 2015 Evaporators Page 2 INDEX EVAPORATORS PAGE Evaporator Design and Info 4 Quick Find List (Sorted
More informationAccurate to 0.1 NIST Traceable Advanced PID Algorithm USB Port Free datalogging/control software
Accurate to 0.1 NIST Traceable Advanced PID Algorithm USB Port Free datalogging/control software CONTROLLERS Serving the laboratory glassware industry for over 75 years State-of-the-Art and Vacuum Controllers
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationwww.labtron.com info@labtron.com Distillation Tester LDT-A10 Labtron LDT-A10 is automated and can withstand a very high temperature. It is designed according to Test Methods for Distillation Characteristics
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationOFI MODEL 60 ATMOSPHERIC CONSISTOMETER INSTRUCTIONAL MANUAL
OFI MODEL 60 ATMOSPHERIC CONSISTOMETER INSTRUCTIONAL MANUAL OPERATING INSTRUCTIONS OFI MODEL 60 ATMOSPHERIC CONSISTOMETER GENERAL The Model 60 Atmospheric Consistometer is utilized to condition cement
More informationOxygen Bomb Calorimeter
Oxygen Bomb Calorimeter EN ISO 1182: Reaction to fire tests for building products Determination of the heat of combustion. This instrument determines the potential maximum total heat release of a product
More informationTABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING M
TABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING MACHINES/HEADS... WIRE RACK SCALE... CUT-OFF SAWS...
More information2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing
More informationAdvance - Elevating De Dusting Machine.
Formulation Process. Sub Category: Advance - Elevating De Dusting Machine. Formulation Process. Sub Category: Advance Dust Extractor Machine. Formulation Process. Sub Category: Advance Tablet Inspection
More informationIntegrated temperature test and calibration bench Model CBS-SC4000
Calibration technology Integrated temperature test and calibration bench Model CBS-SC4000 WIKA data sheet CT 92.33 Applications Testing and calibration of temperature measuring instruments such as: - Mercury
More informationwww.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationproduct manual H-3860D H-3860D_man_0816 Los Angeles Abrasion Machine
product manual H-3860D H-3860D_man_0816 Los Angeles Abrasion Machine General Model H-3860D (Los Angeles Abrasion Machine) is designed to conform to ASTM C131, C535 and AASHTO T96. These methods cover
More informationwww.cmadishmachines.com Table of Contents CMA-66 1. PARTS MANUAL... 4 1.1. Initial Parts Kit (P/N 13996.81)... 4 1.2. Initial Parts Kit (P/N 13996.80)... 5 1.3. Exploded View Drawings... 6 1.3.1. Cabinet
More informationUJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
More informationTex-614-J, Testing Epoxy Materials
Overview Effective Date: January 2001 - July 2002. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification "DMS-6100, Epoxies and Adhesives." The
More informationSimplifying Inspection MAGNETIC PARTICLE TESTING ACCESSORIES
MPI Accessories 7 Magnaflux 7 Magnetic Particle Testing Accessories are designed to help improve the speed, detection capabilites, and cost effectiveness of your MPI system. Simplifying Inspection 48 CABLES,
More information4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
More informationISOCAL - 6 Range Europa Venus Calisto
-45 to 250 C ACROSS RAngE ISOCAL - 6 Range Europa Venus Calisto g 35 x 160mm Calibration Volume g The Most Flexible Temperature Calibrator g S model includes Universal Input Temperature Indicator g Windows
More informationPRECISE. Glove Boxes
PRECISE Glove Boxes PRECISE Basic Glove Boxes All models feature: One-piece molded, medium-density polyethylene shell. Dry powder epoxy-coated steel superstructure. 1/4" thick laminated safety glass viewing
More informationCOOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION
Cooling system component layout 26-2-2 DESCRIPTION AND OPERATION 1 Heater matrix 2 Heater return hose 3 Heater inlet hose 4 Heater inlet pipe 5 Throttle housing 6 Connecting hose 7 Throttle housing inlet
More informationWater Baths & Shaking Water Baths. Quality Technology for Routine Applications
Water Baths & Shaking Water Baths Quality Technology for Routine Applications 94 Water Baths and Shaking Water Baths The TW and SW Water Bath Series are microprocessor-controlled, durable, and long-lasting
More informationIncubators. Incubators
Incubators Stuart has a number of incubators specially designed for accurate and reproducible temperature controlled applications. All incubators have state of the art microprocessor detection, setting
More informationACE GLASS. Benchtop Reactors. Filter Reactors Pressure Reactors
ACE GLASS Benchtop Reactors Filter Reactors Pressure Reactors 2 Table of Contents Item Page Filter Reactors... 3 Benchtop All-in-One Reactor... 12 Pressure Reactors... 13 Reactor Accessories... 9,20 Temperature
More informationModel No Multimix HTM Power. Drive. Digital Inverter Sensor less Vector Control. Speed. Material Mixing capacity Lifting.
2 3 4 5 6 7 Model No Multimix HTM 2105 1/2HP Compact gear AC Motor in Electronic variable speed inverter 0-50 rpm up to 10 kgs by gas spring slider - Quad paddle mixer 83mm - Vessel clamp Model No Multimix
More information