DAMPERS. BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria
|
|
|
- Prudence Taylor
- 5 years ago
- Views:
Transcription
1 DAMPERS BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria T. +43 (1) F (1) office@bategu.at Design VIBRAGOM dampers are composites made of rubber and metal. The metal parts cured onto the elastic rubber part are equipped with internal threads or stud bolts. This makes it easy to attach them to other structural components. The transfer of mechanical and/or acoustic vibrations is effectively prevented, because no metallic contact between the mounting hardware exists. Use For permanent spring mounting of moving masses To isolate vibration generators from their surrounding To protect auxiliary equipment from irritating vibrations To accommodate temperature-induced changes in the shape of structural parts Application Basically, all work machines and prime movers that generate mechanical or acoustic vibrations should be spring mounted. This largely prevents the transfer of inertia forces or imbalances and/or structure-borne noise to the environment. It is important to ensure that the structural design of spring mounted machine parts is not prone to bending or deformation. Feed lines and pipe connections to the elastically mounted auxiliary equipment must be flexible. Types of loads VIBRAGOM dampers can be subjected to compressional, shear and torsional loads. Tensile loads must be avoided. To ensure a long service life, compressional loads should be given preference. To achieve large deflections (softer cushioning and lower natural frequency), springs can be placed one above the other and bolted together. Larger deflections can also be achieved by tilting the main direction of loading. Page 1 of 14
2 DAMPER LACED Type 1 Bolt/bolt Order photo: VR Dimensions Damper laced, Type 1 D H G L dan f mm dan f mm Article ID Hardn. 3,6 1, M5 10 5,2 1,5 1,6 2,5 VR ,5 2, ,8 0, M5 10 5,6 3,5 1,3 5,5 VR ,4 2, ,0 3, M ,0 2,0 4,6 2,5 VR ,0 8, ,0 2, M ,5 4,5 3,3 7,0 VR ,0 5, ,0 6, M ,0 2,0 8,5 2,5 VR ,0 13, ,0 9, M ,0 3,0 13,0 5,0 VR ,0 20, ,0 5, M ,0 3,5 7,4 6,0 VR ,0 12, ,5 3, M ,0 5,0 5,5 8,0 VR ,0 9, ,0 10, M ,0 2,5 15,0 3,0 VR ,0 22, ,0 15, M ,0 2,5 22,5 5,0 VR ,0 37, ,0 9, M ,0 7,0 13,0 11,0 VR ,0 20,0 165 Page 2 of 14
3 Dimensions Damper laced, Type 1 D H G L dan f mm dan f mm Article ID Hardn. 85,0 22, M ,0 6,0 32,0 9,0 VR 109a ,0 54, ,0 25, M ,0 7,0 35,0 10,0 VR ,0 60, ,0 40, M ,0 7,0 58,0 11,0 VR ,0 90, ,0 65, M ,0 10,0 88,0 15,0 VR ,0 140,0 165 Page 3 of 14
4 DAMPER CYLINDRICAL Type 1 Bolt/bolt Order photo: VR Dimensions DAMPER cylindrical, Type 1 D H G L dan f mm dan f mm Article ID Hardn. 3,0 0, M4 8 4,6 2,0 1,5 4,0 VR ,2 2, ,0 1, M6 10 9,5 1,5 2,5 2,0 VR ,0 3, ,0 3, M4 8 25,0 1,0 4,5 1,5 VR ,0 7, ,0 1, M ,0 1,5 2,8 2,0 VR ,0 4, ,0 1, M4 12 8,5 1,5 2,0 2,0 VR ,0 3, ,0 6, M ,0 1,0 9,5 2,0 VR ,0 16, ,0 4, M ,0 1,5 5,8 2,5 VR ,0 9, ,0 3, M ,0 3,0 4,8 5,0 VR ,0 8, ,0 11, M ,0 1,0 16,0 2,5 VR ,0 26, ,0 6, M ,0 1,5 8,5 1,0 VR ,0 14, ,0 6, M ,0 2,5 9,5 4,0 VR ,0 16,0 165 Page 4 of 14
5 Dimensions DAMPER cylindrical, Type 1 D H G L dan f mm dan f mm Article ID Hardn. 16,5 5, M ,0 3,0 7,0 5,0 VR ,0 12, ,0 4, M ,0 4,0 6,0 6,0 VR ,0 10, ,0 10, M ,0 1,5 14,0 2,5 VR ,0 22, ,0 7, M ,0 2,0 11,0 3,0 VR ,0 19, ,0 6, M ,0 3,5 9,0 4,5 VR ,0 15, ,0 18, M ,0 4,0 26,0 6,5 VR ,0 43, ,0 12, M ,0 4,0 18,7 6,5 VR ,0 31, ,0 14, M ,0 5,0 20,0 8,0 VR ,0 34, ,0 31, M ,0 2,0 48,0 4,0 VR ,0 75, ,0 27, M ,0 4,0 40,0 6,0 VR ,0 66, ,0 28, M ,0 6,0 42,0 9,0 VR ,0 70, ,0 24, M ,0 6,0 35,0 10,0 VR ,0 58, ,0 38, M ,0 6,0 50,0 9,0 VR ,0 84, ,0 65, M ,0 6,0 90,0 10,0 VR ,0 140, ,0 58, M ,0 5,0 85,0 8,0 VR ,0 142,0 165 Page 5 of 14
6 Dimensions DAMPER cylindrical, Type 1 D H G L dan f mm dan f mm Article ID Hardn. 184,0 53, M ,0 7,0 78,0 11,0 VR ,0 130, ,0 115, M ,0 8,0 170,0 12,0 VR ,0 270, ,0 96, M ,0 7,0 145,0 11,0 VR ,0 217, ,0 112, M ,0 12,0 144,0 16,0 VR ,0 205, ,0 115, M ,0 7,0 140,0 11,0 VR ,0 230,0 165 Page 6 of 14
7 DAMPER CYLINDRICAL Type 2 Bolt/nut Order photo: VR Dimensions DAMPER cylindrical, Type 2 D H G L T dan f mm dan f mm Article ID Hardn. 2,7 0, M ,2 1,5 1,0 2,0 VR ,6 1, ,0 2, M ,0 1,0 4,0 2,0 VR ,0 6, ,0 4, M ,0 3,0 5,8 VR ,0 9, ,0 8, M ,0 1,0 12,0 2,0 VR ,0 20, ,0 7, M ,0 2,0 10,0 3,0 VR ,0 17, ,0 5, M ,0 2,5 7,0 2,0 VR ,0 12, ,0 5, M ,0 4,0 7,5 6,0 VR ,0 12, ,0 7, M ,0 1,0 11,0 2,0 VR ,0 19, ,0 5, M ,0 2,5 7,5 3,5 VR ,0 12, ,0 18, M ,0 3,0 27,0 6,0 VR ,0 45, ,0 15, M ,0 3,0 22,0 6,0 VR ,0 36, ,0 14, M ,0 4,0 20,0 3,0 VR ,0 32,0 165 Page 7 of 14
8 Dimensions DAMPER cylindrical Type 2 D H G L T dan f mm dan f mm Article ID Hardn. 2,7 0, M ,2 1,5 1,0 2,0 VR ,6 1, ,0 2, M ,0 1,0 4,0 2,0 VR ,0 6, ,0 4, M ,0 3,0 5,8 5,0 VR ,0 9, ,0 8, M ,0 1,0 12,0 2,0 VR ,0 20, ,0 7, M ,0 2,0 10,0 3,0 VR ,0 17, ,0 5, M ,0 2,5 7,0 2,0 VR ,0 12, ,0 5, M ,0 4,0 7,5 6,0 VR ,0 12, ,0 7, M ,0 1,0 11,0 2,0 VR ,0 19, ,0 5, M ,0 2,5 7,5 3,5 VR ,0 12, ,0 18, M ,0 3,0 27,0 6,0 VR ,0 45, ,0 15, M ,0 3,0 22,0 6,0 VR ,0 36, ,0 14, M ,0 4,0 20,0 3,0 VR ,0 32, ,0 26, M ,0 3,0 40,0 5,0 VR ,0 66, ,0 28, M ,0 5,0 42,0 8,0 VR ,0 70,0 165 Page 8 of 14
9 Dimensions DAMPER bevelled Type 2 Bolt D H G L T dan f mm dan f mm Article ID Hardn. 86,0 27, M ,0 6,0 40,0 10,0 VR ,0 67, ,0 37, M ,0 5,0 50,0 8,0 VR ,0 82, ,0 68, M ,0 5,0 100,0 10,0 VR ,0 167, ,0 70, M ,0 4,0 80,0 7,0 VR ,0 130, ,0 50, M ,0 6,0 74,0 10,0 VR ,0 123, ,0 98, M ,0 6,0 145,0 10,0 VR ,0 250, ,0 74, M ,0 5,0 113,0 8,0 VR ,0 168, ,0 102, M ,0 8,0 132,0 14,0 VR ,0 190, ,0 92, M ,0 5,0 122,0 8,0 VR ,0 190,0 165 Page 9 of 14
10 DAMPER LACED Type 2 Bolt/nut Order photo: VR Dimensions Damper laced, Type 2 Dimension Load Pressure Load Shear D H G L T dan f mm dan f mm Article ID Hardn. 4,5 2, M ,0 1,0 3,2 2,5 VR ,5 5, ,4 0, M ,5 2,5 1,2 4,0 VR ,8 2, ,0 4, M ,0 2,0 6,2 2,5 VR ,0 11, ,0 2, M ,0 4,0 3,6 6,5 VR ,0 5, ,0 11, M ,0 2,0 14,0 2,5 VR ,0 22, ,0 10, M ,0 2,0 14,0 4,0 VR ,0 21, ,5 4, M ,0 2,5 6,4 4,0 VR ,0 10, ,5 3, M ,0 4,0 5,4 7,0 VR ,0 9, ,0 19, M ,0 1,5 28,0 4,0 VR ,0 46, ,0 7, M ,0 5,0 11,0 8,0 VR ,0 17,0 165 Page 10 of 14
11 Dimensions Damper laced, Type 2 D H G L T dan f mm dan f mm Article ID Hardn. 70,0 21, M ,0 5,0 30,0 8,0 VR 109a ,0 50, ,0 26, M ,0 6,0 38,0 10,0 VR ,0 63, ,0 36, M ,0 6,0 54,0 10,0 VR ,0 90, ,0 55, M ,0 8,0 72,0 12,0 VR ,0 180,0 165 Page 11 of 14
12 DAMPER CYLINDRICAL Type 3 Nut/nut Order photo: VR Dimensions DAMPER cylindrical, Type 3 D H G T dan f mm dan f mm Article ID Hardn. 2,5 1, M4 4 3,7 1,0 1,5 2,0 VR ,8 2, ,5 4, M6 6 18,0 2,5 6,3 4,0 VR ,0 10, ,0 5, M6 6 25,0 2,0 7,5 3,0 VR ,0 12, ,0 5, M6 6 23,0 3,0 7,5 5,0 VR ,0 12, ,0 5, M8 8 23,0 1,5 8,0 2,5 VR ,0 13, ,0 19, M8 8 75,0 2,5 28,0 5,0 VR ,0 47, ,0 17, M ,0 2,0 26,0 5,0 VR ,0 44, ,0 14, M8 8 48,0 3,0 20,0 6,0 VR ,0 30, ,0 28, M ,0 1,5 42,0 4,0 VR ,0 66, ,0 28, M ,0 4,0 44,0 7,0 VR ,0 73, ,0 28, M ,0 4,0 37,0 8,0 VR ,0 58, ,0 69, M ,0 4,0 50,0 7,0 VR ,0 97,0 165 Page 12 of 14
13 Dimensions DAMPER cylindrical, Type 3 D H G T dan f mm dan f mm Article ID Hardn. 155,0 60, M ,0 4,0 85,0 8,0 VR ,0 140, ,0 65, M ,0 2,5 90,0 6,0 VR ,0 125, ,0 44, M ,0 5,0 74,0 8,0 VR ,0 110, ,0 88, M ,0 4,0 130,0 8,0 VR ,0 210, ,0 63, M ,0 4,0 99,0 6,5 VR ,0 142, ,0 95, M ,0 6,0 122,0 12,0 VR ,0 172, ,0 78, M ,0 4,0 105,0 6,5 VR ,0 170,0 165 Page 13 of 14
14 DAMPER LACED Type 3 Nut/nut Order photo: VR Dimensions Damper laced, Type 3 D H G T dan f mm dan f mm Article ID Hardn. 2,3 0, M5 5 3,2 1,5 1 2,5 VR ,8 1, ,2 VR M , , M ,5 VR , M ,5 5,5 2,5 VR , , M8 8 15,5 3 5,5 6 VR ,5 7, M ,5 7 VR , , M VR 109a ,5 22, M VR M VR M VR Page 14 of 14
HOLLOW SPRINGS. BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria
HOLLOW SPRINGS BATEGU Gummitechnologie GmbH & Co KG 1190 Vienna, Muthgasse 22 Austria T. +43 (1) 368 21 53-0 F. + 43 (1) 368 21 53-24 office@bategu.at www.bategu.at Properties: Due to their spherical shape,
LIGHTWEIGHT GEISLINGER GESILCO SHAFT
LIGHTWEIGHT GEISLINGER GESILCO SHAFT GEISLINGER GESILCO SHAFT The Geislinger Gesilco shaft product range is based on more than 20 years experience in developing fibre composite couplings and shafts. The
TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.
MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories
Lightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
SPRINGS; SHOCK-ABSORBERS; MEANS FOR DAMPING VIBRATION
CPC - F16F - 2017.08 F16F SPRINGS; SHOCK-ABSORBERS; MEANS FOR DAMPING VIBRATION Springs, shock-absorbers or vibration-dampers; Their arrangement in, or adaptation for, particular apparatus if not provided
CENTA POWER TRANSMISSION CENTAX-SEC CENTA X-SEC ENGLISH. Is this PDF up to date? click here for an update check!
CENTA POWER TRANSMISSION --3-7 CENTAX-SEC ENGLISH Is this PDF up to date? click here for an update check! ONE SYSTEM. FULL FLEXIBILITY. SYSTEM COUPLING COMPONENTS APPLICATIONS TECHNICAL DATA SERVICE At
Vibration Control Technology Industry. Catalogue 2012
Vibration Control Technology Industry Catalogue 212 The information in this product catalogue is based on the experience gained in decades of research on the development and manufacture of components for
UNIT-3 PART-A C.K.GOPALAKRISHNAN, AP/MECH, MAHALAKSHMI ENGINEERING COLLEGE, TRICHY
UNIT-3 PART-A 1. List the loads normally acting on a shaft? Bending load Torsional load or tw isting load. Axial thrust. 2. Write dow n the expression for the power transmitted by a shaft. P=2π NT/60 Where
LORD Micro-Mounts for Electronic Components PRODUCT BROCHURE
LORD Micro-Mounts for Electronic Components PRODUCT BROCHURE Creating Solutions to Your Most Demanding Challenges Are your electronic circuit boards suffering from excessive shock and vibration? A COLLABORATIVE
Microcellular polyurethane as steering coupling element
Microcellular polyurethane as steering coupling element Material specific properties of solutions based on Cellasto -Elastolit-X composite structures Contents Cellasto material specific properties: Classification,
BEVELGEAR. Competence and Performance.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY BEVELGEAR Competence and Performance General Advantages of Spiral, Hypoid and Zerol Bevel Gears High level of coverage due to the fact that several teeth are
SUSPENSION 04 CLAMPS
SUSPENSION CLAMPS 04 4 SUSPENSION CLAMPS 57 Contents General... 58 Suspension clamp trunnion type, forged,... 63 Suspension clamp trunnion type, forged, with bigger angle of deflection, for aluminium based
DESIGN OF MACHINE ELEMENTS UNIVERSITY QUESTION BANK WITH ANSWERS. Unit 1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS
DESIGN OF MACHINE ELEMENTS UNIVERSITY QUESTION BANK WITH ANSWERS Unit 1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS 1.Define factor of safety. Factor of safety (FOS) is defined as the ratio
MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
High Pressure Fuel Rail Feed Lines September Platform Section Title Change
9 10-14 1 9 10-14 SUBJECT DATE High Pressure Fuel Rail Feed Lines September 2014 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0082 DDC-SVC-MAN-0182
Power Transmission Solutions
RINGFEDER Products are available from MARYLAND METRICS Power Transmission Solutions 11 2011 Partners for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD
AGE 222. Introduction to Farm Machinery Dr. O. U. Dairo. Farm Machinery and Power
AGE 222 Introduction to Farm Machinery Dr. O. U. Dairo Farm Machinery and Power Equipment in the farm are classified as farm power and farm machinery Power provides pull/force required tom operate implements
Roscommon Equipment Center Northeast Forest Fire Supervisors in Cooperation with Michigan s Forest Fire Experiment Station
REC Newsnote #10 January 1999 Conversion of M1008 and M1009 Electric Systems to 12 Volt Roscommon Equipment Center Northeast Forest Fire Supervisors in Cooperation with Michigan s Forest Fire Experiment
Clutch Damper High Cycle Fatigue
Abstract Clutch Damper High Cycle Fatigue KD Wang LUK Incorporated Kalyan Bairavarasu LUK Incorporated The clutch damper of the manual transmission system is prone to vibration related fatigue damage when
Hours / 100 Marks Seat No.
17610 16172 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
Design and Vibrational Analysis of Flexible Coupling (Pin-type)
Design and Vibrational Analysis of Flexible Coupling (Pin-type) 1 S.BASKARAN, ARUN.S 1 Assistant professor Department of Mechanical Engineering, KSR Institute for Engineering and Technology, Tiruchengode,
Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders
TECHNICAL Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders Leo Dupuis, Bosch-Rexroth Sr. Development Engineer Introduction Large hydraulic cylinders (LHCs) are integral
Floor Mount Stool - Slammer Stone Seat
Floor Mount Stool - Slammer Stone Seat Model S561-100 Overall Height 18.5" Base Width 6" Seat Diameter 13" Weight 14 lbs Base: 18" high, 2 1 /2" tubing, fully welded both top and bottom to 6" x 6" x 1
SKF Disc Couplings. Selection
SK Disc Couplings The SK disc coupling is the ideal solution in medium to high applications that require torsional rigidity, offer some allowance for misalignment, and do not require lubrication. These
18SP709Rev Page 1 of 8
18SP709 EPA10/GHG14 Two-Filter Fuel System Rev KM59 GEN1 DD13 High Pressure Fuel Feed Lines, Mounting Bracket and P-clips Service Kit (P/N: A0000701032) PERSONAL INJURY All parts provided within this kit
Series 54 and S54 Resilient Couplings
Series 54 and S54 Resilient s Bibby Transmissions Resilient s Bibby are the world originator of the resilient grid type shaft coupling, which is universally accepted by engineers to be one of the most
Designing for Quiet, Vibration-Free Operation
Designing for Quiet, Vibration-Free Operation By Neil Plesner Market Development Manager E-A-R Indianapolis, Indiana DESIGNING FOR QUIET, VIBRATION-FREE OPERATION A common problem associated with many
Introduction Pulleys are similar to rollers but without bearings or rotating parts inside. They are placed in the front and rear of the conveyor and p
PULLEYS 43-52 Introduction Pulleys are similar to rollers but without bearings or rotating parts inside. They are placed in the front and rear of the conveyor and provide traction to the belt. Applications
1-3/8" inside-to-inside dimension. length of the leg. S162
Member Designation MEMBER DEPTH: FLANGE WIDTH: STIFFENER LIP: Member Depths are taken in 1/100 inches. Flange Widths are taken in 1/100 inches. Member Flange Width Stiffener Lip (in) For Track Sections,
THE FIBRE COMPOSITE PRODUCT LINE BY GEISLINGER
THE FIBRE COMPOSITE BUILT TO LAST. THE COMPACT AND LIGHTWEIGHT GESILCO DESIGN PAVES THE WAY FOR GREAT OPPORTUNITIES. For 60 years Geislinger has been driven by its inventive spirit to develop innovative
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET
RYOBI 10 INCH COMPOUND MITER SAW MODEL NO. TS1350 REPAIR SHEET 1 FIGURE A 36 26 25 24 SEE FIGURE B 23 27 20 28 29 30 35 31 37 33 2 10 22 11 12 9 21 13 14 17 16 15 32 18 31 19 34 SEE FIGURE D 8 6 5 4 2
Design principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
ANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
BMW E36/E46 Driveshaft Removal & Installation
BMW E36/E46 Driveshaft Removal & Installation A driveshaft is essentially just a spinning shaft which sends torque from the engine to the differential. The drive flange on the transmission side of the
Economic and Comfortable. Highly Flexible Couplings for Construction Vehicles.
Economic and Comfortable. Highly Flexible Couplings for Construction Vehicles. Modern engines with high torques and optimized fuel consumption are making significantly higher demands on today s drivelines.
Plate Girder and Stiffener
Plate Girder and Stiffener (Gelagar Pelat dan Pengaku) Dr. AZ Department of Civil Engineering Brawijaya University Introduction These girders are usually fabricated from welded plates and thus are called
Tubular Centrifugal Inline Fans Page Introduction... 2 Construction Features... 3 Specification and Dimension Data TCN-D (Inline Fan- Direct
Tubular Centrifugal Inline Fans Page Introduction........................................... 2 Construction Features.................................. 3 Specification and Dimension Data TCN-D (Inline Fan-
FATIGUE RESISTANT & MAINTENANCE- FREE GEISLINGER COMPOWIND
FATIGUE RESISTANT & MAINTENANCE- FREE GEISLINGER COMPOWIND Courtesy of Vestas Wind Systems A/S GEISLINGER. LEADERS IN ENGINEERING. Geislinger develops and produces torsional vibration dampers, torsional
voith.com The reference in silent thrusters Voith Rim-Drive technology in yachts
voith.com The reference in silent thrusters Voith Rim-Drive technology in yachts 1 2 Voith Inline Thruster VIT A Revolutionary Thruster System. Building a Rim-Drive thruster system that offers the ultimate
L15 Dynamics & Vibration Laboratory
LABORATORY PLANNING GUIDE L15 Dynamics & Vibration Laboratory Content Covered subjects according to the curriculum... 2 Main concept... 3 Initial training provided for laboratory personnel... 3 Requirements
ENTWICKLUNG DIESELMOTOREN
ENTWICKLUNG DIESELMOTOREN BMW Steyr Diesel Engine Development Center MULTIBODY AND STRUCTURAL DYNAMIC SIMULATIONS IN THE DEVELOPMENT OF NEW BMW 3- AND 4-CYLINDER DIESEL ENGINES Dr. Stefan Reichl, Dr. Martin
UNIT IV DESIGN OF ENERGY STORING ELEMENTS. Prepared by R. Sendil kumar
UNIT IV DESIGN OF ENERGY STORING ELEMENTS Prepared by R. Sendil kumar SPRINGS: INTRODUCTION Spring is an elastic body whose function is to distort when loaded and to recover its original shape when the
Standard Elastomeric Bearings
Standard Elastomeric s Elastic support of structural members subject to static loading Scope and dimensioning guidelines planmäßig elastisch lagern Standard Elastomeric s type bi-trapez Permissible compressive
Finite Element Modeling and Analysis of Vehicle Space Frame with Experimental Validation
Finite Element Modeling and Analysis of Vehicle Space Frame with Experimental Validation Assoc. Prof Dr. Mohammed A.Elhaddad Mechanical Engineering Department Higher Technological Institute, Town of 6
3.2 UTLI41A AND UTLI46A GENERAL SPECIFICATIONS
3.2 UTLI41A AND UTLI46A GENERAL SPECIFICATIONS The UTEM SkyTel UTLI41A or UTLI46A is an insulated telescoping aerial lift available with either a side mounted single man platform or an end mounted single
Super Cushion Air Springs
NE W Super Cushion Air Springs Interflex Hose & Bellows Ltd. www.interflex.co.uk Ludlow Business Park Ludlow Shropshire SY8 1XF United Kingdom Email: airsprings @ interflex.co.uk Phone: 616-538-1111 Watts:
STEERING COLUMN - STANDARD
STEERING COLUMN - STANDARD 1994 Toyota Celica 1994 STEERING Toyota - Steering Column - Standard Celica DESCRIPTION & OPERATION Steering column is a collapsible 2-piece design. Columns use shear pins to
The Reference in Silent Thrusters. Voith Rim-Drive Technology
The Reference in Silent Thrusters. Voith Rim-Drive Technology 1 A Revolutionary Thruster System. Building a Rim-Drive thruster system that offers the ultimate in comfort without compromise in performance
Wheelchair Cushions- The Science behind seating. Dr. Stephen Sprigle, Evan W. Call, Sharon Pratt, PT
Wheelchair Cushions- The Science behind seating Dr. Stephen Sprigle, Evan W. Call, Sharon Pratt, PT Important characteristics of wheelchair cushions Mechanical Properties Load deflection Recovery Impact
Composite Design for Armoured Fighting Vehicles
Composite Design for Armoured Fighting Vehicles A presentation to IOM 3 18 th March 2008 Dr Mark French QinetiQ Project Manager mafrench@qinetiq.com 01252 394377 Armour and Structural Design Research Areas
Article on Sheath materials, Thermowells, Fittings, and Terminations
Article on Sheath materials, Thermowells, Fittings, and Terminations 1. INTRODUCTION Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or
VIBRATION CONTROL VIBRATION CONTROL
13 VIBRATION CONTROL Vibration Control Isomounts Isomounts are general-purpose vibration isolators suitable for mobile and static equipment installations. Available in three different sizes Isomounts come
Technical Data Sheet. British Standards Compliant. TECHNICAL DATA SHEET System 160 (British Standards)
Technical Data Sheet British Standards Compliant Mass 10 System 160 Mass 25 Mass 50 MAT 75 / 125 Superprop Hydraulics Quickbridge MU Falsework MU Bridging Compact Bridging BarrierGuard 800 Instrumentation
Heat treatment Elimination in Forged steel Crankshaft of Two-stage. compressor.
Research Journal of Engineering Sciences ISSN 2278 9472 Heat treatment Elimination in Forged steel Crankshaft of Two-stage Compressor Abstract Lakshmanan N. 1, Ramachandran G.M. 1 and Saravanan K. 2 1
DESIGN OF A MODIFIED LEAF SPRING WITH AN INTEGRATED DAMPING SYSTEM FOR ADDED COMFORT AND LONGER LIFE
DESIGN OF A MODIFIED LEAF SPRING WITH AN INTEGRATED DAMPING SYSTEM FOR ADDED COMFORT AND LONGER LIFE Sean D Silva 1, Sumit Jain 2 1, 2 Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology,
KEYWORDS: ANSYS, Clamping effects, Leaf spring, Pro-E. International Journal of Computational Engineering Research Vol, 03 Issue, 10
International Journal of Computational Engineering Research Vol, 03 Issue, 10 Leaf Spring Analysis with Eyes Using FEA B.Mahesh Babu 1, D.Muralidhar Yadav 2, N.Ramanaiah 3 1 Assistant Professor, Dr.Samuel
AGN 076 Alternator Bearings
Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 076 Alternator Bearings BEARING TYPES In the design of STAMFORD and AvK alternators, the expected types of rotor
Power Transmission Solutions
11 2011 Power Transmission Solutions Partner for performance A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany to fabricate and promote Friction Spring
Transverse Distribution Calculation and Analysis of Strengthened Yingjing Bridge
Modern Applied Science; Vol. 8, No. 3; 4 ISSN 93-844 E-ISSN 93-85 Published by Canadian Center of Science and Education Transverse Distribution Calculation and Analysis of Strengthened Yingjing Bridge
Sub Base Fuel Tank With Walk-in Type Enclosure. Installation Instructions
Sub Base Fuel Tank With Walk-in Type Enclosure Installation Instructions CONTRACTOR: INSTALLATION INSTRUCTIONS Phoenix Products, LLC 1727 Bennett St. Jacksonville, FL 32206-3197 Phone: (904) 354-1858 Fax:
DESIGN AND ANALYSIS OF COMPOSITE LEAF SPRING
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.177 183, Article ID: IJMET_07_05_019 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
Combi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
The right twist for your machine. Torque motors 1FW6
The right twist for your machine Torque motors 1FW6 Achieve higher dynamics and precision smoothly In the machine tool industry and other sectors, there is a constant demand for greater precision and higher
1. SPECIFICATIONS 2. WHEEL ALIGNMENT Front Suspension. (gas type) Rear Suspension. (gas type)
441101 053 1. SPECIFICATIONS Front Suspension Rear Suspension Description Suspension type Spring type Shock absorber type Stabilizer bar type Suspension type Spring type Shock absorber type Stabilizer
Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015
Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015 ANNEX XXXIV Requirements on mechanical couplings 1. Definitions For the purposes of this Annex: 1.1. Mechanical coupling
CENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124
Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and
DuraCooler Keel Cooler
HEAT EXCHANGE SYSTEMS DuraCooler Keel Cooler Streamlined Header Design for Improved Efficiency One Piece 90/10 Copper-Nickel Construction Superior Heat Transfer Available in Flange-Mount or Through-Hull
Geislinger Damper. The smallest possible damper for each engine
The Geislinger damper is capable of adjusting the natural frequency of a system and of reducing torsional vibration. Thus it reliably protects the crankshafts, camshafts, intermediate and propeller shafts
IJRASET: All Rights are Reserved
Failure Analysis and Design Modification of Propeller Shaft of Bus Sweety P. Mhaske¹, Nitin P. Doshi² PG Scholar Mechanical Engg, Bapurao Deshmukh College of Engg & Technology, Sevagram, Wardha, Maharashtra,
DESIGN OF QUICK CONNECT-DISCONNECT HYDRAULIC COUPLING
DESIGN OF QUICK CONNECT-DISCONNECT HYDRAULIC COUPLING Rohit George Sebastian 1 and Satheesh Kumar S. 2 1 Final year B.Tech student, Department of Mechanical Engineering, Government Engineering College
Planning Manual Ergoline Esprit 770-S. Ergoline Esprit 770-S. Dynamic Power Dynamic Power Climatronic. Contents
Planning Manual EN 60335-2-27:2003+A1:2009 Ultra Performance Plus-Technology combines face tanning units with UV-B optimized Spaghetti lamps. This ensures maximum, standardized tanning intensity as well
Installation Instructions
Installation Instructions Eibach Springs, Inc. 264 Mariah Circle Corona, California 92879-1751 USA Tech Support 800-222-8811 Ext 114 Eibach Multi-Pro R1 Coilovers - #2085.712 2006-2008 BMW, 325i, 328i,
4" and 6" Rigid Unloader Instructions
1004 East Illinois Street Assumption, IL 62510 217-226-4421 4" and 6" Rigid Unloader Instructions Instructions Date: 01-22-09 Printed in the U.S.A. Page 1 of 6 Copyright 2009 by www.gsiag.com Group RA-3036
SOLUTIONS FOR SAFE HOT COIL EVACUATION AND COIL HANDLING IN CASE OF THICK AND HIGH STRENGTH STEEL
SOLUTIONS FOR SAFE HOT COIL EVACUATION AND COIL HANDLING IN CASE OF THICK AND HIGH STRENGTH STEEL Stefan Sieberer 1, Lukas Pichler 1a and Manfred Hackl 1 1 Primetals Technologies Austria GmbH, Turmstraße
Vibration damage mechanism analysis on rotor of diesel generating set with rigid coupling
Journal of Physics: Conference Series PAPER OPEN ACCESS Vibration damage mechanism analysis on rotor of diesel generating set with rigid coupling To cite this article: Bing Yan et al 2015 J. Phys.: Conf.
FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft
, July 5-7, 2017, London, U.K. FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft Ashwani Kumar, Neelesh Sharma, Pravin P Patil Abstract The main
Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES. 2. What are the two type of poles used in salient pole machines?
SRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF EEEE QUESTION BANK Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES 1. Name the two types of synchronous machines. 1. Salient
Study on Dynamic Behaviour of Wishbone Suspension System
IOP Conference Series: Materials Science and Engineering Study on Dynamic Behaviour of Wishbone Suspension System To cite this article: M Kamal and M M Rahman 2012 IOP Conf. Ser.: Mater. Sci. Eng. 36 012019
Contents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x
Contents Part Number Legend... 2 The HELIX Racing Clutch Range... 4 Clutch Terminology... 5 Clutch Fitting & Flywheels... 6 Release Bearings... 7 Concentric Slave Cylinder Release Bearings... 8 Clutch
DESIGN, ANALYSIS & FABRICATION OF SHAFT DRIVEN BICYCLE
DESIGN, ANALYSIS & FABRICATION OF SHAFT DRIVEN BICYCLE Dandage R.V. 1, Patil A.A. 2, Kamble P.N. 3 1 Asst. Prof. Mechanical engineering, RMCET MU, (India) 2& 3 UG Student, Mechanical engineering, RMCET
Tension and Compression Load Cell Model 8435
Technical Product Information w Tension and Compression Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential
VERTEX UNIVERSAL TESTING MACHINE
OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of
Retrofitting Turbomachinery with High Performance Flexible Dry Couplings
A l t r a I n d u s t r i a l M o t i o n Warner Electric Boston Gear TB Wood s Formsprag Clutch Wichita Clutch Retrofitting Turbomachinery with High Performance Flexible Dry Couplings Marland Clutch Industrial
Locking Assemblies & Locking Elements
US 01 2016 Locking Assemblies & Locking Elements Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION GMBH
FINITE ELEMENT ANALYSIS OF TIE-ROD FOR SPACECRAFTS
FINITE ELEMENT ANALYSIS OF TIE-ROD FOR SPACECRAFTS Kiran S Sankanagoudar 1, Dr.H.K.Amarnath 2, Prashant D. Bagalkot 3, Mukund Thakur 4 1 M.Tech Student, Gogte Institute of Technology, Belgaum, (India)
Vibration, and Sound Quality
Vehicle Noise, Vibration, and Sound Quality By Gang Sheng (Gang Sheng Chen) SASInternational Warrendale, Pennsylvania USA Table of Contents Preface ix Chapter 1 Introduction to Vehicle Vibrations and Sound
18SP701Rev2 GHG14 Two-Filter Fuel System KM63 GEN2 DD15AT Engines High Pressure Fuel Feed Lines, Mounting Bracket and P-clips Service Kit
18SP701Rev2 GHG14 Two-Filter Fuel System KM63 GEN2 DD15AT Engines High Pressure Fuel Feed Lines, Mounting Bracket and P-clips Service Kit (P/N: A4730704432) PERSONAL INJURY All parts provided within this
GENERAL INFORMATION FEATURES.
TECHNICAL GUIDE GENERAL INFORMATION SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has one of the highest strength-to-mass ratios of any structural
PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
Regulation for Installing
Regulation for Installing Phase Conductors and Earth Wires, as well as OPGW/OPPC (PCEWOP) made from aluminium, aluminium alloy, steel, aluminium clad steel, HACIN and combinations of these materials with
VDE-registered oil-resistant PVC control cable with black outer sheath for a wide range of applications
VDE-registered oil-resistant PVC control cable with black outer sheath for a wide range of applications - PVC control cable, VDE registered, oil resistant, flexible and UV-resistant for various applications,
Aquadrive Antivibration System
Aquadrive Antivibn System GKN Land Systems Aftermarkets & Services Headquarters: GKN Service International GmbH Nussbaumweg 19 21 51503 Rösrath, Germany www.gknservice.com www.aquadrive.com Art. No. 190213_10/2011
INSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS DODGE RAM 1500 REGULAR CAB REGULAR CAB
INSTALLATION INSTRUCTIONS PARTS LIST: 2 Steel Running Boards 3 12mm Hex Nuts 1 Driver/Left Mounting Bracket 4 10-1.5mm x 35mm Hex Bolts 1 Driver/Left Support Bracket 4 10mm x 27mm OD x 3mm Flat Washers
Vibration Control. Catalog Vibration Control. Y o u r T e c h n o l o g y S p e c i a l i s t
Vibration Control Freudenberg Group Vibration Control Catalog 2007 Y o u r T e c h n o l o g y S p e c i a l i s t The information in this product catalog is based on the experience gained in decades of
Buffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
Technical Specification. for. Supply, installation and commissioning of Diesel Generators for UNDP
United Nations Development Programme Recovery and Crisis Prevention برنامج األمم المتحدة اإلنمائي Iraq Technical Specification for Supply, installation and commissioning of Diesel Generators for UNDP February
Nomenclature... xi Hydraulic Laws, Theorems, and Equations...xii
Nomenclature... xi Hydraulic Laws, Theorems, and Equations...xii 1 Introduction 1.1 Component Design Perspective...1 1.2 Hydraulic Power Evolution...2 1.3 Hydraulic Applications...6 1.4 Component Design
Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines.
E X P E R I E N C E C O U N T S Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines. PSI...the respected leader in piping system technology. Time tested and proven
A STUDY ON THE PROPELLER SHAFT OF CAR USING CARBON COMPOSITE FIBER FOR LIGHT WEIGHT
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 5, May 2018, pp. 603 611, Article ID: IJMET_09_05_066 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=5
Interface Webinar Wednesday. with Keith Skidmore
Interface Webinar Wednesday Torque 101 with Keith Skidmore www.interfaceforce.com 480 948 5555 Definitions What is a Torque Transducer? Rotary vs. Reaction Shaft vs. Flange Couplings Floating vs. Fixed