ACCESS SOLUTIONS 2018

Transcription

1 NUMERIC SEARCH LIST Order Order no. from no. to Page Order Order no. from no. to Page Order Order no. from no. to Page Order Order no. from no. to Page Order Order no. from no. to Page Order Order no. from no. to Page Climb smart! / /38/75/ / / / / / / / / / / / / / / / / /161/ / /161/ / /161/ / /161/163 Stirrup iron 147 Subject to technical modifications and printing errors. Dimensions and weights are approximate values. No part of this publication may be reproduced without our prior permission. D /2018 Schi ACCESS SOLUTIONS 2018 * years quality guarantee standard products Compliant product solutions according to new DIN EN 131 ACCESS SOLUTIONS 2018 Innovative climbing technique. Meeting the strictest health & safety standards.

2 GÜNZBURGER STEIGTECHNIK INTELLIGENT SOLUTIONS MADE IN GERMANY Therefore the Guidebook Access Solutions 2018 only contains products that fulfil the strictest of occupational safety standards and are also extremely easy to handle: Because that is precisely what you, as a professional, need. With our innovative ideas and solutions we set new trends, for instance in the non-slip step padding and climbing equipment ergonomics segments. We specifically supply excellent solutions in our standard assortment that contains more than 1,600 products. Because health and safety and added value for users are not just extras at GÜNZBURGER STEIGTECHNIK but standards on which we do not compromise. Simply Climb smart!. We offer more than others do. Products Made in Germany with 15 years quality guarantee and the know-how in all areas of this family company that is now on the hands of the fourth generation. The passion and commitment is evident in all our products and our competent service. Dear Reader, For around 120 years GÜNZBURGER STEIGTECHNIK has stood for specialist know-how, for the passion of developing new ideas and the ambition to inspire you, our customers, time and time again. This claim to be better than the others and to always create added values with our ideas, from which you profit in operational practice, has been continued for generations. My great-grandfather Leopold Munk was already considered to be an inventor. And just as he did in 1899, I am always very happy when our access solutions specialists succeed in creating an innovation, for which you appreciate us. That is exactly what we want to do. We want to earn your respect again and again every day. That only succeeds if we develop products of the highest quality, on which you can rely 100%. The Guidebook Access Solutions 2018 will inform and inspire you. And if you cannot find a solution for your specific problem in the guidebook just contact us: Our experts in the customised products department are specialists when it comes to finding applications for your individual needs. Often, we only need to adapt one of our standard products to make it perfect for your project. Wherever anyone needs to work at an elevated workplace: We are your competent partner and supply safe climbing equipment that you can always rely on. That s a promise! Best regards, Ferdinand Munk Managing director * n-tv familienfreundlichkeit im handwerk CSR-Rating in Silver Iron 2016 CSR Award powered by BHB * TÜV seal Made In Germany : all the products made in Günzburg are marked with this. 2

3 THE RANGE OVERVIEW Product highlights 2018 Contents Page Aluminium rung ladders Aluminium step ladders Wooden ladders Reinforced fibre glass ladders Product highlight Aluminium step ladder RungSafe R 13, Page 39 Shelf ladders 80 Working platforms Step stools 84 From Page 92 Platform ladders Stairs Bridging steps Walkways Manhole and shaft systems Product highlight ML construction manager Aluminium step ladder, Page Single-rail ladders 148 Fall protection 152 Vertical ladders Special-purpose products Roof, chimney, folding and mobile scaffolds, ladder platforms 184 Accessories and spare parts FlexxWork Page Product highlight Service Seminars Alphabetic search list

4 INTELLIGENT SOLUTIONS FROM GÜNZBURGER STEIGTECHNIK! Overview of our product advantages Rung ladders made of aluminium Step ladders made of aluminium Ladders made of reinforced fibre glass Working platforms Step stools Platform ladders Special purpose products Can be retrofitted Flexible Non-slip Full-surface contact nivello ladder shoe ergo-pad grip area Back-friendly Ergonomic Convenient Ideal carrying point Side-rail securing Temperature-resistant clip-step step padding Non-slip Grooved plastic Increased working safety clip-step R 13 step padding NEW! Number of rungs R 13 Certified Non-slip Plastic profile with alu minium oxide particles For wet and oily R 13 work areas Increased working safety Certified Non-slip Surface with aluminium oxide particles For wet and oily R 13 work areas Increased working safety relax step step padding Greater convenience High-quality rubber compound Safe stance 4

5 Rung ladders made of aluminium Step ladders made of aluminium Wooden ladders Ladders made of reinforced fibre glass Special purpose products 15 Can be retrofitted 'safe-cap' ladder joint NEW! More stability and durability Sturdy plastic Provides protection during loading and storage Increased working safety Safe stance Non-slip Standard stabiliser Improved working safety Flexible Safe stance Non-slip nivello stabiliser bar 'roll-bar' stabiliser NEW! Standard retrofit stabiliser NEW! nivello retrofit stabiliser bar Increased working safety Flexible Safe stance Simple change of location Back protection Health-promoting Wheeling instead of carrying Increased working safety Safe stance Non-slip Can be retrofitted Increased working safety Safe stance Non-slip Can be retrofitted 5

6 Seite 4 Seite 6 Seite 10 NEW! Ergonomics and safety at the workplace. Ladders with added value for a healthy back Rung ladders with 'roll-bar' stabiliser for wheeling the ladders help keep employees in industry and trade healthy. For this reason, more and more company doctors and occupational health workers recommend ergonomic access equipment from Günzburg. Chronic back pain is still the number one cause of work-related stoppage time. This means it is only logical that it is better to wheel rung ladders than to carry them. Those who wheel rather than carry save about half of the carrying weight and are relieved of a significant load. The user s back is happy, and the employer, too, since people have less time off work with back pain. Did you know? For ergonomic reasons, the German Social Accident Insurance (DGUV) recommends that transport wheels or similar should be used to move heavy or bulky ladders. Back-friendly and energy-reduced pulling Heavy carrying of rung ladders Wheeling instead of carrying: The 'roll-bar' stabiliser ensures easy transportation of rung ladders without putting strain on the back. ERGO Ergonomie und Arbeitssicherheit in der Steigtechnik NEWS Sonderteil: Arbeitssicherheit For more information about ergonomics, please refer to our Ergo -News brochure. This is available as a free download on our homepage, or as a fax or . Fax +49 (0) 8221 / , info@steigtechnik.de Steigtechnik mit Ergonomievorteil Leitern transportieren bitte recht ergonomisch und rückenfreundlich! Ergonomie und ihr gesundheitlicher Mehrwert Sonderbeitrag aus der AGR aktuell Nr. 49 Vorteile ergonomischer Transporthilfen Beispiel einer Leiter mit 'roll-bar'-traverse 6

7 Practical Video Service Product video watch. understand. be inspired. On our YouTube channel we publish interesting information about GÜNZBURGER STEIGTECHNIK as well as practical instruction, set-up and application videos about our products. The YouTube channel is continually being expanded and extended. Your advantages: Versatile and informative film contents Simple and visual product illustration Even more free and practical service provided by GÜNZBURGER STEIGTECHNIK. The product videos give you comprehensive insight of our product world. Find out about the premium product and workmanship quality, the product features and equipment details. Functions, design and product variants are presented clearly and interestingly. As well as short and sweet. After all, a video says more than a thousand words! Multi-purpose ladders Rung step ladders, double-sided Step ladders, single-sided and double-sided ML Step ladders, single-sided and double-sided Folding steps, single-sided Working platform, rigid Platform ladders, single-sided clip-step step padding Would you like to use our practical VIDEO SERVICE? Subscribe for free to our YouTube channel and make sure you are always up-todate new, simple and practical! /video or scan our QR code. Watch the new product videos now. /video 7

8 DIN EN 131 Part 1+2 Compliant product solutions according to new DIN EN 131 DIE NORMÄNDERUNGEN DIN EN 131-1/-2 PRÜFUNGEN & ANFORDERUNGEN DIN EN 131: 13 Fragen 13 Antworten und Tipps für Sie GÜNZBURGER STEIGTECHNIK ladders satisfy all of the requirements of the latest version of the DIN EN and -2 Do you have any questions about the new DIN EN and -2? All the information you need is presented clearly in our brochure 13 Questions - 13 Answers. The European standards DIN EN and DIN EN 131-2, which govern the construction, types and tests, have undergone a comprehensive revision. One fundamental new aspect is the classification of ladders into two classes. Ladders bearing the labelprofessional are designed for use at workplaces. Non-Professional applies to ladders that may only be used in private. The strength and durability requirements of the classification Professional are higher. You can view this using the QR-Code or simply request a free copy by sending an to info@steigtechnik.de. / normenservice Your advantages: Legally conform GÜNZBURGER STEIGTECHNIK ladders are state of the art and satisfy the requirements of the Health & Safety Act and Industrial Safety Regulation. The satisfy the ladder class Professional. Work safety The following is verified in new stricter tests: The declared stability and non-slip properties of the GÜNZBURGER STEIGTECHNIK ladders allow even better avoidance and reduction of work accidents. Safe in Europe The latest issues of the standards DIN EN and DIN EN apply throughout Europe, i.e. regardless in which European country you work in; GÜNZBURGER STEIGTECHNIK ladders satisfy all requirements of these standards. Safe and long-term investment Thanks to the new standards, GÜNZBURGER STEIGTECHNIK ladders are even more durable and sturdy. 8

9 IMPORTANT FOR 2018! Standards service Alterations to standards be informed. understand. be safe. In our STANDARDS Service we publish relevant and important changes to standards which affect GÜNZBURGER STEIGTECHNIK products. Our standards service is continually being expanded and extended. Your advantages: Completely up-to-date information thanks to our active involvement in standards committees Core changes visualised quickly and simply Legal certainty thanks to information about the latest technical standard Would you like to use our standard service? You will find it on our website at / normenservice or just scan the QR code. Keep up-to-date at all times new, simple and practical! 1. DIN EN Ladders Part 1: Terms, types, functional sizes Published February 2016 Transitional period (extended by European standards organisation CEN originally ) Reason for the extension delayed change to EN both parts of the standard are to be implemented as a package. Main change straight ladders with overall length longer than 3.0 m must have a larger standing width. Implementation e.g. through stabiliser bar or conical design. The push-up parts on push-up and multi-purpose ladders cannot be removed if they are longer than 3.0 m; they are also designed without stabiliser bars. All GÜNZBURGER STEIGTECHNIK ladders are available with the Steigtechnik Guidebook in compliance with the standard. Any GÜNZBURGER STEIGTECHNIK ladders currently being used, can be simply and inexpensively brought to a uniform level of safety using our retrofit kits. As previously, the respective products can also be purchased without stabiliser bars as of if they are used for their intended purpose, i.e. if the upper end of the ladder is secured e.g. with a hook or strap, or if the ladder is permanently installed. The standard in brief * The Ordinance on Safety and Health demands that ladders, step stools and other working equipment correspond to the latest technical standard. more than 3 m Straight ladder longer than 3 m + = Stabiliser bar Safe working in accordance with the standard 9

10 Alterations to standards be informed. understand. be safe. 2. DIN EN Ladders Part 2: Requirements, testing, marking 3. DIN EN Ladders Part 3: Identification and instructions of use DIE NORMÄNDERUNGEN DIN EN 131-1/-2 PRÜFUNGEN & ANFORDERUNGEN DIN EN 131: 13 Fragen 13 Antworten und Tipps für Sie Published April 2017 Specification of new tests for ladders: Strength test of ladder in their application position Torsion test of step ladders Durability test of stepladders Non-slip test of straight ladders Twisting test of straight ladders Strength test of stabilisation equipment (supports) Introduction of ladder classes Professional and Non-Professional. All corresponding GÜNZBURGER STEIGTECHNIK ladders were tested to the Professional requirements. You will find all detailed information about the changes to the standards DIN EN and -2 in our brochure: DIN EN /-2 Tests & requirements 13 questions 13 answers Modified standard agreed in Europe in September 2017 Probable publication date start of 2018 The following changes were made compared to the standard issue dated 2007 Extensive revision with clearer differentiation of specifications for safety signs (pictograms) on the ladders and instructions of use. Specification of general safety symbols acc. To ISO and additional safety information symbols. Additional requirements for multi-purpose ladders, push-up extension ladders, hinged ladders, telescopic ladders and mobile platform ladders. The manufacturer must provide instructions of use with each ladder. The previous regulation The manufacturer can provide user information on its website no longer applies. The instructions of use must contain binding specifications about the parts of ladders that need to be tested, and information abozt maintenance and storage. The standard in brief + = All ladders Definition of ladder class; testing according to new basic test principles Safe working in accordance with the standard 10

11 4. DIN Fire service Emergency ladder systems Part 1: Stationary emergency ladder systems with back protection, holding fixtures, platforms Amended standard published in April 2017 The following changes were made compared to the standard issue dated 2004 The title of the standard was changed, emergency ladder systems without back protection are no longer allowed, i.e. in contrast to the past, all emergency ladders must have a back protection from potential fall heights of up to 5.0 m. The previous regulation specifying that back protection must start between 2,200 mm and 3,000 m still applies. Terms have been added and/or adjusted, amongst other things that emergency ladder systems allow persons to rescue themselves, but also allow other persons to be rescued (e.g. by the fire service). Within the meaning of this standard, persons who can rescue themselves are persons who are physically and mentally able to use an emergency ladder system independently in compliance with this standard, Dimensions and requirements relating amongst other things to back protection have been revised and where possible adapted to DIN (vertical ladders on buildings with side rails) and DIN EN ISO (stationary accesses to mechanical systems). Regulations for access protection fixtures and extendable ladder parts have been included, including the fact that, when lowered, the rungs of the lower ladder segment and the extended emergency descent ladder must be at the same height. The dimensioning loads on platforms were revised: vertical load 4.0 kn/m 2 (previously 3.5 kn/m 2 ) single load 2.0 kn (previously 1.5 kn). Specifications for assembly and operating instructions were revised, including the fact that it must include information about repeat tests and maintenance. The changes to the new DIN standard parts have already been taken into account for the respective products in the guide and in our special constructions. 5. DIN EN ISO Part 1 to 4 Permanent means of access to machinery German DIN documents were published in October Standard parts regulate walkways, working platforms, ramps, stairs, stair ladders, railings and vertical ladders on machinery. The standard parts were included in the list of harmonised standards in the Official Journal of the EU and must be applied from onward. The changes to the new ISO standard parts have already been taken into account for the respective products in the guide and in our special constructions. DIN EN ISO PLANUNGSINFORMATIONEN FÜR ZUGÄNGE ZU MASCHINELLEN ANLAGEN The standard in brief DIN For more detailed information, please see our document PLANNING INFORMATION FOR ACCESS TO MACHINERY This is available free-of-charge from info@steigtechnik.de. + = Changed dimensions and safety regulations Compliant design Safe working in accordance with the standard 11

12 SMART TIPS! KEY FEATURES OF OUR RUNG LADDERS! 01 Aluminium rung ladders years quality guarantee standard products Rung-to-side-rail connection 4-fold edged rung-to-side-rail connection Long-lasting and safe Top-grade industrial quality Robust design for demanding applications Guide fixtures with high-strength reinforced fibre glass sheathing Use of premium materials Accessories for universal ladder inserts e.g. bucket hooks, platforms etc. Practical Makes work easier 'roll-bar' stabiliser Increased stability Simple change of location nivello ladder shoes With movable joint for full-surface contact to the ground 4 times the supporting surface of our conventional ladder shoes 1-3 Available for delivery within 1 3 working days. EXPRESS DELIVERY See page 227 for detailed information 12

13 ALUMINIUM RUNG LADDERS With design approval according to European Standard DIN EN 131, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. An overview of the special features of our rung ladders Choose from the varied range of rung ladders illustrated on the following pages the one best suited to your needs. 01 NEW! Number of rungs R 13 Safe push-up in the highest non-slip class R 13. Number of rungs R 13 is a certified,non-slip step padding for our rung ladders. Number of rungs R 13 with corundum elements fulfil the specifications of the assessment group R 13. The SprossenSafe R 13 enhances workplace safety, particularly in wet, dirty or oil-contaminated work environments. Attachment up to the maximum accessible rungs serves as a visual check that the ladder is being used correctly. Aluminium rung ladders NEW! Standard stabiliser Safe push-up in compliance with the standard The standard stabiliser ensures a safe stance for straight ladders in excess of 3 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up.* NEW! Retrofit stabiliser Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. nivello Stabiliser Extra safe push-up in compliance with the standard Increase working safety by using rung ladders with the extra-wide nivello stabiliser. The nivello stabiliser is fitted with non-slip and flexible nivello ladder shoes on both sides.* 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard Wheeling instead of carrying: Rely on increased stability and ideal convenience when changing location with rung ladders. The 'roll-bar' stabiliser allows sturdy and correspondingly heavy rung ladders to be moved easily from one spot to another even when extended. Going easy on your back and improving your health.* * The stabiliser is enclosed separately and is screwed to the lower end of the rail in two places. 13

14 Aluminium rung ladders Straight ladders Aluminium straight ladder with standard stabiliser 01 Aluminium rung ladders (* from 3.0 m) Safe push-up in compliance with standard Stable rectangular tube side-rails, rectangular rungs 30 x 30 mm grooved on both sides, permanent rung-to-side rail connection. Outside width 420 mm, rung spacing 280 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Fig Working height up to approx. m Overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs Weight approx. kg * 10114* 10116* 10118* 10120* 10124* 14

15 Aluminium rung ladders Straight ladders Aluminium straight ladder number of rungs R 13 with standard stabiliser (* from 3.0 m) Safe push-up in the highest non-slip class R 13. Stable rectangular tube side-rails, rectangular rungs 30 x 30 mm grooved on both sides, permanent rung-to-side rail connection. Outside width 420 mm, rung spacing 280 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Number of rungs R 13 is a certified, non-slip step padding for our rung ladders. Number of rungs R 13 with corundum elements fulfil the specifications of the assessment group R13. The SprossenSafe R 13 enhances workplace safety, particularly in wet, dirty or oil-contaminated work environments. Attachment up to the maximum accessible rungs serves as a visual check that the ladder is being used correctly. On request, also with 'roll-bar' stabiliser or nivello stabiliser. R Aluminium rung ladders Corundum coating R 13 Fig Number of rungs R 13 Safe push-up in the highest non-slip class R 13. Working height up to approx. m Overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs Weight approx. kg * 10814* 10816* 10818* 10820* 10824* 15

16 Aluminium rung ladders Straight ladders 01 Aluminium rung ladders Straight ladder made of aluminium with nivello stabiliser Extra safe push-up in compliance with the standard Stable rectangular tube side-rails, rectangular rungs 30 x 30 mm grooved on both sides, permanent rung-to-side rail connection, non-slip nivello ladder shoes. Outside width 420 mm, rung spacing 280 mm. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Accessories: Fig Bucket hook 19115, page 213 Working height up to approx. m Overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs Weight approx. kg Fig Straight ladder made of aluminium with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Working height up to approx. m Overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs Weight approx. kg RRP excl. VAT in Euros

17 Aluminium rung ladders Straight ladders Straight ladder made of aluminium Flexible use - intended purpose Stable rectangular tube side-rails, rectangular rungs 30 x 30 mm grooved on both sides, permanent rung-to-side rail connection, non-slip nivello ladder shoes. Outside width 420 mm, rung spacing 280 mm. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 01 Aluminium rung ladders Example illustration, attaching the ladder with hooks Working height up to approx. m Overall length m depth of side-rails mm Number of rungs Weight approx. kg Retrofit stabiliser for straight ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. ladder retrofit kit Width of stabiliser bar m Symbol For information about retrofit kits and the current standard, see pages 8-9 and page

18 Aluminium rung ladders Multi-purpose ladder 01 Aluminium rung ladders Aluminium multi-purpose ladder, 3-section with nivello stabiliser Extra safe push-up in compliance with the standard Can be used as straight ladder, step ladder and push-up extension ladder, suitable for stairs. Equipped with corrosion-resistant fittings, non-slip nivello ladder shoes, push-in hooks with automatically locking lift-off protection. High stability thanks to spreader lock with 2 high-strength nylon straps and detachable metal strut. Upper ladder with wall wheels. Rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Further usage options: Product video Aluminium multipurpose ladder Fig Working height up to approx. m Ladder length extended as three-part straight ladder m Ladder length as 2-section leaning ladder m Ladder length as 2-section stepladder with extension m Length of the individual ladder parts m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 6 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg Bridging platform kit Suitable for the 3-section multi-purpose ladder. Stable steel sub-structure, non-slip platform board, hanging hook with lock. Delivered disassembled, assembly instructions included. Only possible with order no Working height up to approx. m 3.00 Max. platform height m 1.00 Platform length m 1.43 Platform width m 0.33 Max. load kg Base widener 1.20 m Suitable for rectangular side-rails from mm Fig with ladder order no

19 Aluminium rung ladders Multi-purpose ladder Aluminium multi-purpose ladder, 3-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard Can be used as straight ladder, step ladder and push-up extension ladder, suitable for stairs. With 'roll-bar' stabiliser for flexible use. Equipped with corrosion-resistant fittings, non-slip nivello ladder shoes, push-in hooks with automatically locking lift-off protection. High stability thanks to spreader lock with 2 high-strength nylon straps and detachable metal strut. Upper ladder with wall wheels. Rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. 01 Aluminium rung ladders The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Accessories: Hook-in platform order no , page 213 Fig Further usage options: Fast and safe movement in all positions of use. Working height up to approx. m Ladder length extended as three-part straight ladder m Ladder length as 2-section leaning ladder m Ladder length as 2-section stepladder with extension m Length of the individual ladder parts m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 6 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg See the Accessories and Spare Parts chapter for suitable accessories for your ladder. 19

20 Aluminium rung ladders Push-up extension ladder Aluminium push-up extension ladder, 2-section with standard stabiliser 01 Aluminium rung ladders (* from 3,0 m) Safe push-up in compliance with the standard Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection, upper section of the ladder adjustable from rung to rung by hand, non-slip nivello ladder shoes. From size 2 x 14 upper section of the ladder with wall wheels. Outside width 420 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the overall length of the ladder is more than 3.0 m. The standard stabiliser ensures a safe stance for straight ladders in excess of 3 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg * 20810* 20812* 20814* 20816* 20818* 20820* 20824* 20

21 Aluminium rung ladders Push-up extension ladder Aluminium push-up extension ladder, 2-section with nivello stabiliser Extra safe push-up in compliance with the standard Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection; upper section of the ladder adjustable from rung to rung by hand, non-slip nivello ladder shoes. From size 2 x 14 upper section of the ladder with wall wheels. Outside width 420 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the overall length of the ladder is more than 3.0 m. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. 01 Aluminium rung ladders Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg Aluminium push-up extension ladder, 2-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg

22 Aluminium rung ladders Push-up extension ladder 01 Aluminium rung ladders Aluminium push-up extension ladder, 2-section Flexible use - intended purpose Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection, upper section of the ladder adjustable from rung to rung by hand, non-slip nivello ladder shoes. From size 2 x 14 upper section of the ladder with wall wheels. Outside width 420 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps Fig , attachment of the ladder with gutter holder Working height up to approx. m Extended overall length m Retracted overall length m Depth of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg Retrofit stabiliser for push-up extension ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

23 Aluminium rung ladders Push-up extension ladder Aluminium push-up extension ladder, 3-section with standard stabiliser Safe push-up in compliance with the standard Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection, non-slip nivello ladder shoes, central and upper section of the ladder adjustable from rung to rung by hand. Outside width 500 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the overall length of the ladder is more than 3.0 m. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. 01 Aluminium rung ladders Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg

24 Aluminium rung ladders Push-up extension ladder 01 Aluminium rung ladders Aluminium push-up extension ladder, 3-section with nivello stabiliser Extra safe push-up in compliance with the standard Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection, non-slip nivello ladder shoes, central and upper section of the ladder adjustable from rung to rung by hand. Outside width 500 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the overall length of the ladder is more than 3.0 m. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg Fig Aluminium push-up extension ladder, 3-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg

25 Aluminium rung ladders Push-up extension ladder Aluminium push-up extension ladder, 3-section Flexible use - intended purpose Stable and corrosion-resistant guide fixtures, insertion hooks with automatic locking lift-off protection, non-slip nivello ladder shoes, central and upper section of the ladder adjustable from rung to rung by hand. Outside width 500 mm, rung spacing 280 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the overall length of the ladder is more than 3.0 m. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 01 Aluminium rung ladders Fig , attachment of the ladder with gutter holder Working height up to approx. m Extended overall length m Retracted overall length m Depth of side-rails mm Number of rungs 3 x 8 3 x 10 3 x 12 3 x 14 Weight approx. kg Retrofit stabiliser for push-up extension ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

26 Aluminium rung ladders Rope-operated extension ladder 01 Aluminium rung ladders Aluminium rope-operated extension ladder, 2-section with standard stabiliser Safe push-up in compliance with the standard Automatic locking hook, height adjustment by synthetic rope from rung to rung, guide fittings, upper ladder section with wall wheels, non-slip nivello ladder shoes. Rung spacing 280 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Outside width mm Depth of side-rails mm Number of rungs 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg

27 Aluminium rung ladders Rope-operated extension ladder Aluminium rope-operated extension ladder, 2-section with nivello stabiliser Extra safe push-up in compliance with the standard Automatic locking hook, height adjustment by synthetic rope from rung to rung, guide fittings, upper ladder section with wall wheels, non-slip nivello ladder shoes. Rung spacing 280 mm. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. 01 Aluminium rung ladders Fig Working height up to approx. m Extended overall length m Retracted overall length m Outside width mm Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg Aluminium rope-operated extension ladder, 2-section with 'roll-bar' stabiliser Ergonomic transport and safe push-upin compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety -. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Fig Working height up to approx. m Extended overall length m Retracted overall length m Outside width mm Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg

28 Aluminium rung ladders Rope-operated extension ladder 01 Aluminium rung ladders Aluminium rope-operated extension ladder, 2-section Flexible use - intended purpose Automatic locking hook, height adjustment by 2 rope pulleys, allowing the central and upper ladder section to be adjusted from rung to rung, upper section of the ladder with wall wheels, non-slip nivello ladder shoes. Outside width 470 mm, rung spacing 280 mm. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps Fig , attachment of the ladder with gutter holder Working height up to approx. m Extended overall length m Retracted overall length m Outside width mm Depth of side-rails mm Number of rungs 2 x 14 2 x 16 2 x 18 2 x 20 2 x 24 Weight approx. kg Retrofit stabiliser for rope-operated extension ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

29 Aluminium rung ladders Rope-operated extension ladder Aluminium rope-operated extension ladder, 3-section with standard stabiliser Safe push-up in compliance with the standard Automatic locking hook, height adjustment by 2 rope pulleys, allowing the central and upper ladder section to be adjusted from rung to rung, upper section of the ladder with wall wheels, non-slip nivello ladder shoes. Outside width 470 mm, rung spacing 280 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. 01 Aluminium rung ladders Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 14 3 x 16 3 x 18 Weight approx. kg

30 Aluminium rung ladders Rope-operated extension ladder 01 Aluminium rung ladders Aluminium rope-operated extension ladder, 3-section with nivello stabiliser Extra safe push-up in compliance with the standard Automatic locking hook, height adjustment by 2 rope pulleys, allowing the central and upper ladder section to be adjusted from rung to rung, upper section of the ladder with wall wheels, non-slip nivello ladder shoes. Outside width 500 mm, rung spacing 280 mm. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 14 3 x 16 3 x 18 Weight approx. kg Fig Aluminium rope-operated extension ladder, 3-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Depth of side-rails mm Number of rungs 3 x 14 3 x 16 3 x 18 Weight approx. kg

31 Aluminium rung ladders Rope-operated extension ladder Aluminium rope-operated extension ladder, 3-section Flexible use - intended purpose Automatic locking hook, height adjustment by 2 rope pulleys, allowing the central and upper ladder section to be adjusted from rung to rung, upper section of the ladder with wall wheels, non-slip nivello ladder shoes. Outside width 470 mm, rung spacing 280 mm. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 01 Aluminium rung ladders Fig , attachment of the ladder with gutter holder Working height up to approx. m Extended overall length m Retracted overalllength m Depth of side-rails mm Number of rungs 3 x 14 3 x 16 3 x 18 Weight approx. kg Retrofit stabiliser for rope-operated extension ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. ladder retrofit kit Width of stabiliser bar m Symbol 31

32 Aluminium rung ladders Folding ladder 01 Aluminium rung ladders Folding ladder made of aluminium, 2-section with nivello stabiliser Extra safe push-up in compliance with the standard Can be used as a step and straight ladder. Ideal stability thanks to automatically locking steel hinges and non-slip ladder shoes. With nivello stabiliser and non-slip nivello ladder shoes for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Fig Working height up to approx. m Ladder length as leaning ladder m Ladder length as double ladder m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 4 2 x 6 2 x 8 Weight approx. kg Fig Folding ladder made of aluminium, 2-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety -. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Working height up to approx. m Extended overall length m Ladder length as double ladder m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 4 2 x 6 2 x 8 Weight approx. kg

33 Aluminium rung ladders Multi-purpose ladder Aluminium multi-purpose ladder, 2-section with nivello stabiliser Extra safe push-up in compliance with the standard Can be used as a step ladder, straight ladder and push-up extension ladder. High stability through spreader lock with 2 high-strength nylon straps, corrosion-resistant guide fittings, insertion hook with lift lock, non-slip nivello ladder shoes. Outside width 490 mm, rung spacing 280 mm. With nivello stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. 01 Aluminium rung ladders Fig Working height up to approx. m Extended overall length m Ladder length as double ladder m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 Weight approx. kg Aluminium multi-purpose ladder, 2-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard As above, however also with 'roll-bar' stabiliser. With 'roll-bar' stabiliser and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety -. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser is included separately and is Fig screwed on the lower end of the side-rail in two places. Working height up to approx. m Extended overall length m Ladder length as double ladder m Base spread m Width of stabiliser bar m Depth of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 Weight approx. kg

34 Aluminium rung ladders Multi-purpose ladders 01 Aluminium rung ladders Aluminium multi-purpose ladder, 4-section with nivello stabiliser Extra safe push-up in compliance with the standard Universally usable as straight and step ladder, and as a working platform. Use covering and handrail when used as work platform (see accessories). 6 automatically locking steel hinges provide operational safety. Rung spacing 280 mm. With 2 nivello stabilisers and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabilisers are included separately and are screwed on the lower end of the side-rail in two places. Further usage options: Fig Accessories: Fig Fig Fig and order no Wooden cover, 1-part, suitable for and Wooden cover, 1-part, suitable for Aluminium chequered plate cover, folds in the middle, suitable for and Aluminium chequered plate cover, folds in the middle, suitable for Aluminium handrail, can be clamped in place, for 31310, and Working height up to approx. m Ladder length as leaning ladder m Ladder length as double ladder m Height as working platform m Length as working platform m Base spread as stepladder m Base spread as working platform m Width of stabiliser bar m Transport dimensions m 0.35 x 0.76 x x 0.99 x x 0.99 x x 1.23 x x 1.23 x 0.25 Depth of side-rails mm Number of rungs 4 x 2 2 x x 3 4 x 3 2 x x 4 4 x 4 Weight approx. kg * * In accordance with DIN EN it cannot be used in the working trestle and wall clearance position. 34

35 Aluminium rung ladders Multi-purpose ladders Aluminium multi-purpose ladder, 4-section with 'roll-bar' stabiliser Ergonomic transport and safe push-up in compliance with the standard Patented design no Universally usable as straight and step ladder, and as a working platform. Use covering and handrail when used as work platform (see accessories). 6 automatically locking steel hinges provide operational safety. Rung spacing 280 mm. With 2 'roll-bar' stabilisers and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabilisers are included separately and are screwed on the lower end of the side-rail in two places. 01 Aluminium rung ladders Further usage options: Fig Accessories: Wooden cover, 1-part, suitable for and Wooden cover, 1-part, suitable for Aluminium chequered plate cover, folds in the middle, suitable for and Aluminium chequered plate cover, folds in the middle, suitable for Aluminium handrail, can be clamped in place, for 31310, and Fig Fig Fig and order no Working height up to approx. m Ladder length as leaning ladder m Ladder length as double ladder m Height as working platform m Length as working platform m Base spread as step adder m Base spread as working platform m Width of stabiliser bar m Transport dimensions m 0.35 x 0.76 x x 0.99 x x 0.99 x x 1.23 x 0.25 Depth of side-rails mm Number of rungs 4 x 2 2 x x 3 4 x 3 2 x x 4 Weight approx. kg

36 NEW! Aluminium rung ladders Telescopic ladders Aluminium telescopic ladder, 4-section with stabiliser Safe push-up in compliance with the standard Can be used as a step and straight ladder, suitable for stairs. Can be folded in the middle thanks to automatically locking steel hinges, both outer sections can be extended telescopically at a distance of 280 mm. 01 The stabiliser ensures a safe stance. Aluminium rung ladders Further usage options: Fig Working height as straight ladder up to approx. m Ladder length as leaning ladder m Ladder length as double ladder m Width of stabiliser bar m External width m Packaging dimensions m 1.03 x 0.50 x x 0.56 x x 0.63 x x 0.70 x 0.21 Number of rungs 4 x 3 4 x 4 4 x 5 4 x 6 Weight approx. kg NEW! Accessories: Wall-mounted ladder holder XL For the space-saving storage of ladders on the wall. For more information, please see chapter Accessories and spare parts on page

37 Aluminium rung ladders Telescopic ladders Aluminium telescopic ladder, 4-section Flexible use - intended purpose Can be used as a step and straight ladder, suitable for stairs. Can be folded in the middle thanks to automatically locking steel hinges, both outer sections can be extended telescopically at a distance of 280 mm. High stability thanks to conical design. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 01 Aluminium rung ladders Further usage options: Fig Working height as straight ladder up to approx. m Ladder length as leaning ladder m Ladder length as double ladder m External width m Packaging dimensions m 1.03 x 0.50 x x 0.56 x x 0.63 x x 0.70 x 0.21 Number of rungs 4 x 3 4 x 4 4 x 5 4 x 6 Weight approx. kg Accessories for telescopic ladders: Side-rail extension Height continuously adjustable. Adjustment range approx. 375 mm Fig

38 Aluminium rung ladders Step ladders Aluminium step ladder Sturdy rectangular tube side-rails, grooved rectangular rungs 30 x 30 mm permanently edged to the side-rails, conical side-rails for safe stand, lower ends of the side-rails with non-slip nivello ladder shoes, upper ends of the side-rails with end caps. High stability thanks to spreader lock with 2 high-strength nylon straps. 01 Aluminium rung ladders + For free You will receive our free tool tray when you purchase these rung step ladders. Solid, galvanised steel hinges with screw attachment. Accessories: Fig Bucket hook 19115, page 213 Working height up to approx. m Overall length m Bottom outside width m Base spread m Depth of side-rails mm Number of rungs 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 Weight approx. kg See the Accessories and Spare Parts chapter for suitable accessories for your ladder. NEW! Accessories: Wall-mounted ladder holder XL For the space-saving storage of ladders on the wall. For more information, please see chapter Accessories and spare parts on page

39 Aluminium rung ladders Step ladders Aluminium step ladder number of rungs R 13 Safe push-up in the highest non-slip class R 13 NEW! Sturdy rectangular tube side-rails, grooved rectangular rungs 30 x 30 mm permanently edged to the side-rails, conical side-rails for safe stand, lower ends of the side-rails with non-slip nivello ladder shoes, upper ends of the side-rails with end caps. High stability thanks to spreader lock with 2 high-strength nylon straps. 01 Number of rungs R 13 is a certified,non-slip step padding for our rung ladders. Number of rungs R 13 with corundum elements fulfil the specifications of the assessment group R 13. The SprossenSafe R 13 enhances workplace safety, particularly in wet, dirty or oil-contaminated work environments. Attachment up to the maximum accessible rungs serves as a visual check that the ladder is being used correctly. Aluminium rung ladders Accessories: + For free You will receive our free tool tray when you purchase these rung step ladders. Solid, galvanised steel hinges with screw attachment. Bucket hook 19115, page 213 Fig Number of rungs R 13 Safe push-up in the highest non-slip class R 13. Corundum coating R 13 Working height up to approx. m Overall length m Bottom outside width m Base spread m Depth of side-rails mm Number of rungs 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 Weight approx. kg See the Accessories and Spare Parts chapter for suitable accessories for your ladder. 39

40 Aluminium rung ladders Step ladders 01 Aluminium rung ladders Aluminium step ladder 4-section with nivello stabiliser For stairs. Height adjustable from rung to rung in no time. High stability thanks to spreader lock with 2 high-strength nylon straps. Now standard: With 2 nivello stabilisers 0.93 m or 1.20 m in width, non shoes on both sides for extremely safe standing and high working safety. The nivello stabilisers are included separately and are screwed on the lower end of the side-rail in two places each. Fig Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Base spread m Depth of side-rails mm Number of rungs 4 x 8 4 x 10 4 x 12 Weight approx. kg

41 Aluminium rung ladders Step ladders 01 Aluminium rung ladders Fig Aluminium step ladder 4-section with 'roll-bar' stabiliser For stairs. Height adjustable from rung to rung in no time. High stability thanks to spreader lock with 2 high-strength nylon straps. With wide 'roll-bar' stabiliser on one side, and a nivello stabiliser on the other with non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. Fast and safe. The 'roll-bar' stabiliser and the nivello stabiliser are included separately and are screwed on the lower end of the side-rail in two places. Working height up to approx. m Extended overall length m Retracted overall length m Width of stabiliser bar m Base spread m Depth of side-rails mm Number of rungs 4 x 8 4 x 10 4 x 12 Weight approx. kg

42 Aluminium rung ladders Step ladders 01 Aluminium rung ladders Aluminium step ladder suitable for stairs, with 4 side-rail extensions Sturdy rectangular tube side-rails, grooved rectangular rungs 30 x 30 mm permanently edged to the side-rails, conical side-rails for safe stand, lower ends of the side-rails and side-rail extensions with non-slip nivello ladder shoes, upper ends of the side-rails with end caps. High stability thanks to spreader lock with 2 high-strength nylon straps. Solid screwed steel hinges (galvanised steel). Side-rail extensions with sturdy guide, continuously adjustable downwards. The side-rail extensions can be safely and ergonomically locked with star knobs pleasant to touch and with non-slip softline coating. Adjustment range on the climbing section max. 400 mm. Adjustment range on the support unit max mm. + For free You will receive our free tool tray when you purchase these rung step ladders. Fig Ergonomic star knobs pleasant to the touch for safe locking of the side-rail extension. Sturdy and safe guide for the side-rail extension. Working height (support unit extended max.) up to approx. m Overall length approx. m Lower outside width, ladder retracted m Lower outside width, push-up unit extended m Lower outside width, support unit extended m Depth of side-rails mm Base spread, retracted approx. m Base spread, max. extended (0.4/1.0 m) m Number of rungs 2 x 5 2 x 6 2 x 7 2 x 8 Weight approx. kg

43 Aluminium rung ladders Hall ladders Aluminium hall ladder Ladder construction made of stable rectangular tube profiles, continuously grooved rectangular rungs, height adjustment by rope from rung to rung, locking by automatic locking hooks. Standing platform and back protection hoop at the upper end. 2 mobile stabiliser bars, 2000 mm wide, 4 swivel castors Ø 160 mm with locking device. The ladder can be folded together in a space-saving manner just needing a few steps. 01 Aluminium rung ladders Fig Working height up to approx. m Platform height approx. m Extended overall length m Retracted overall length m Base spread m Number of rungs including platform 2 x x x x Weight approx. kg

44 SMART TIPS! KEY FEATURES OF OUR STEP LADDERS! 02 Aluminium step ladders years quality guarantee standard products Ladders joint with 'safe-cap' Optimised ladder joint with larger contact surface 6-fold riveting and greater wall thickness for increased ladder stability and service life The 'safe-cap' offers protection during loading and storage of ladders. ergo-pad grip area Ergonomically shaped grip area for easier and more convenient handling of our step ladders Attachment to optimum carrying point Integrated clamping mechanism secures the side-rails of the ladder when folded Protected by patented design no / Step-to-side-rail connection 4-fold edged rung-to-side-rail connection Long-lasting and safe nivello ladder shoes With movable joint for full-surface contact to the ground 4 times the supporting surface of our conventional ladder shoes EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days. See page 227 for detailed information 44

45 ALUMINIUM STEP LADDERS With design approval according to European Standard DIN EN 131, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. An overview of the special features of our step ladders Choose from the varied range of step ladders illustrated on the following pages the one best suited to your needs. 02 clip-step step padding R13 The new clip-step R 13 step padding is a certified, non-slip covering for our step ladders. With its synthetic material profile including its aluminium oxide particles, the step padding clip-step R 13 meets the specifications of classification group R 13 and was classified with V6 for the displacement space in this classification group. The step padding clip-step R 13 provides additional increase of workplace safety, particularly in wet or oil-contaminated work environment. According to DIN EN 13, the step padding clip-step is applied up to the max. accessible step in the case of step ladders accessible from both sides, thus functioning as an optical check for correct use of the ladder. See the Accessories and Spare Parts chapter for clip-step R13 retrofit kits. Aluminium step ladders clip-step step padding Live up to the increased requirements on work safety and provide for optimised non-slip property, safe step and comfortable standing on our step ladders. The step padding made of grooved synthetic material is clipped onto the full surface of the step and is an exact fit. According to DIN EN 131, the step padding clip-step is applied up to the max. accessible step in the case of step ladders accessible from both sides, thus functioning in addition as an optical check for correct use of the ladder. See the Accessories and Spare Parts chapter for clip-step retrofit kits. relax step step padding The relax step step padding pads the front edge of the ladder step, thus providing increased comfort in case of long-lasting work on the ladder. The relax step step padding is made of a high-quality rubber compound and is worked into the leading edge of the step. Users can support themselves comfortably on the next step in the ladder. The soft step padding offer a pleasant and safe hold and therefore reduce work fatigue. Spring-mounted castors When in unloaded condition) step ladders can be easily moved thanks to the four self-locking spring-mounted castors Ø 80 mm at the side-rail ends. Two detachable metal struts connect both ladder sections and provide for high stability. 45

46 Aluminium step ladders step ladder Single-sided step ladder made of aluminium Grooved steps with a depth of 80 mm. Permanent step-toside-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Large, grooved standing platform for safe working. With practical, integrated tray made of top-quality plastic. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. 02 From 7 steps, spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Aluminium step ladders NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Product video Aluminium step ladder Fig Working height up to approx. m Total height m Platform height m Base spread m Bottom outside width m Number of steps including platform Weight approx. kg

47 Aluminium step ladders step ladder Single-sided step ladder made of aluminium, with clip-step Steps with a depth of 80 mm with non-slip clip-step step padding. Permanent step-to-side-rail connection. Non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. From 7 steps, spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination Product video Aluminium step ladder with clip-step Fig Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg Aluminium step ladders Single-sided step ladder made of aluminium, with clip-step R 13 Steps with a depth of 80 mm with certified, non-slip clipstep R 13 step padding for use in wet and oily work areas. Permanent step-to-side-rail connection. Non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. From 7 steps, spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Fig Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg

48 Aluminium step ladders step ladder Double-sided step ladder made of aluminium Grooved steps with a depth of 80 mm. Permanent step-toside-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Solid, sturdy and 4-fold bolted aluminium ladder joint. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination Aluminium step ladders NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Product video Aluminium step ladder Fig Working height up to approx. m Total height m Base spread m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9 2 x 10 2 x 12 2 x 14 Weight approx. kg

49 Aluminium step ladders step ladder Double-sided step ladder made of aluminium, with clip-step Steps with a depth of 80 mm with non-slip clip-step step padding. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. The clip-step step padding is only applied up to the maximum accessible step in accordance with DIN EN Product video Aluminium step ladder with clip-step Aluminium step ladders Fig Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9 2 x 10 2 x 12 2 x 14 Weight approx. kg Double-sided step ladder made of aluminium, with clip-step R 13 Steps with a depth of 80 mm with certified, non-slip clipstep R 13 step padding for use in wet and oily work areas. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. The clip-step R 13 step padding ons only applied up to the maximum accessible step in accordance with DIN EN Fig Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9 2 x 10 2 x 12 2 x 14 Weight approx. kg

50 Aluminium step ladders step ladder 02 Single-sided step ladder made of aluminium, with relax step Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. From 8 steps, spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Aluminium step ladders Fig Accessories: Wall bracket for ladder L 19839, page 218 Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg Single-sided step ladder made of aluminium, with relax step and castors Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. 4 self-locking spring-mounted castors at the side-rail ends. Permanent step-to-side-rail connection, non-slip nivello ladder shoes. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. Rigid connection through metal struts detachable on both sides. High stability thanks to conical design. Castor Ø 80 mm, spacing between steps 235 mm, ladder inclination 20. Fig Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg All ladders available with spring-mounted castors at an extra charge (see Accessories and spare parts chapter ). 50

51 Aluminium step ladders step ladder Single-sided step ladder made of aluminium, with castors Grooved steps with a depth of 80 mm, 4 self-locking spring-mounted castors on the side-rail ends. Permanent step-to-side-rail connection, non-slip nivello ladder shoes. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. Rigid connection through metal struts detachable on both sides. High stability thanks to conical design. Castor Ø 80 mm, spacing between steps 235 mm, ladder inclination clip-step and clip-step R 13 step padding You will find retrofit kits for these straight ladders in the Accessories and spare parts chapter. Fig Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg Aluminium step ladders Single-sided step ladder made of aluminium 250 kg, with clip-step R 13 Steps with a depth of 80 mm with certified, non-slip clipstep R 13 step padding for use in wet and oily work areas. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. From 5 steps, spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Fig Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg load 250kg Maximum load 250 kg. 51

52 Aluminium step ladders step ladder Double-sided step ladder made of aluminium, with relax step Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination Aluminium step ladders Fig NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 8 2 x 10 2 x 12 Weight approx. kg Fig Double-sided step ladder made of aluminium, with relax step and castors Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. 4 self-locking spring-mounted castors at the side-rail ends. Permanent step-to-side-rail connection, non-slip nivello ladder shoes. Rigid connection through metal struts detachable on both sides. High stability thanks to conical design. Castor Ø 80 mm, spacing between steps 235 mm, ladder inclination 20. NEW! Accessories: File holder Order no , page 213 Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 8 2 x 10 2 x 12 Weight approx. kg All ladders available with spring-mounted castors at an extra charge (see Accessories and spare parts chapter ). 52

53 Aluminium step ladders step ladder Double-sided step ladder made of aluminium, with castors Grooved steps with a depth of 80 mm. 4 self-locking spring-mounted castors at the side-rail ends. Permanent step-to-side-rail connection, non-slip nivello ladder shoes. Rigid connection through metal struts detachable on both sides. High stability thanks to conical design. Castor Ø 80 mm, spacing between steps 235 mm, ladder inclination 20. NEW! Accessories: File holder 19272, page 213 clip-step and clip-step R 13 step padding You will find retrofit kits for these straight ladders in the Accessories and spare parts chapter. Fig Aluminium step ladders Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 9 2 x 10 2 x 12 2 x 14 Weight approx. kg Double-sided step ladder made of aluminium 250 kg, with clip-step R 13 Steps with a depth of 80 mm with certified, non-slip clipstep R 13 step padding for use in wet and oily work areas. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area with clamping mechanism. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. The clip-step R 13 step padding ons only applied up to the maximum accessible step in accordance with DIN EN Fig load 250kg Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 Weight approx. kg Maximum load 250 kg. 53

54 Aluminium step ladders step ladder 02 Aluminium step ladders ML Single-sided step ladder made of aluminium Ideally suited for daily use thanks to its handy and slender shape and ergonomically shaped side-rails. Grooved aluminium steps with a depth of 80 mm and grooved, non-slip ladder bases made of plastic for full contact on the ground. Stable, 4-fold riveted ladder joint made of aluminium and permanent, tightly screwed stepto-side-rail connections. Large, grooved standing platform for safe working. With practical, integrated tray made of top-quality plastic and with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. The 3 5 step ladders are available in a choice of natural or anodised aluminium. With this version, the side-rails are anodised abrasion-proof. Product video ML aluminium step ladder Fig /11254 Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Wall-mounted ladder holder L For the space-saving storage of ladders on the wall. Page 218 Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. For more information, please go to page Material Natural aluminium Natural aluminium Natural aluminium Natural aluminium Natural aluminium Anodised aluminium Anodised aluminium Anodised aluminium Working height up to approx. m Total height m Platform height m Bottom outside width m Number of steps including platform Weight approx. kg NEW!

55 Aluminium step ladders step ladder ML double-sided step ladder made of aluminium Ideally suited for daily use thanks to its handy and slender shape and ergonomically shaped side-rails. Grooved aluminium steps with a depth of 80 mm and grooved, non-slip ladder bases made of plastic for full contact on the ground. Stable, 2-fold bolted ladder joint made of aluminium and permanent, tightly screwed stepto-side-rail connections. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination Aluminium step ladders Product video ML aluminium step ladder Fig NEW! Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Wall-mounted ladder holder XL For the space-saving storage of ladders on the wall. Page 218 Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. For more information, please go to page Material Natural aluminium Natural aluminium Natural aluminium Natural aluminium Natural aluminium Working height up to approx. m Total height m Bottom outside width m Number of steps 2 x 3 2 x 4 2 x 5 2 x 6 2 x 7 Weight approx. kg

56 Aluminium step ladders Straight ladder Straight ladder made of aluminium, with standard stabiliser 02 Aluminium step ladders (* from 3,0 m) Safe push-up in compliance with the standard Grooved steps with a depth of 80 mm. Permanent stepto-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area. Ladder width 420 mm, spacing between steps 235 mm. Ladder inclination 20. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Fig Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Handrail, for self-installation. Length 750 mm, height 190 mm Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. For more information, please go to page Length 1300 mm, height 200 mm Length 2000 mm, height 200 mm Exit side-rail For safe exit and entry of ladders , page 214 Working height up to approx. m Overall length m Width of stabiliser bar m Base area m Number of steps Weight approx. kg * 40614* 40616* 40618* 56

57 Aluminium step ladders Straight ladder Straight ladder made of aluminium Flexible use - intended purpose Grooved steps with a depth of 80 mm. Permanent stepto-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area. Ladder width 420 mm, spacing between steps 235 mm. Ladder inclination 20. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 02 Aluminium step ladders clip-step and clip-step R 13 step padding You will find retrofit kits for these straight ladders in the Accessories and spare parts chapter. Example illustration, attaching the ladder with hooks Working height up to approx. m Overall length m Base area m Number of steps Weight approx. kg See the Accessories and Spare Parts chapter for suitable accessories for your ladder. Retrofit stabiliser for straight ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the 'standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. For these ladders you can purchase the stabiliser (without nivello ladder shoe) as a retrofit kit. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

58 Aluminium step ladders Straight ladder Straight ladder made of aluminium, with relax step with standard stabiliser 02 Aluminium step ladders (* from 3,0 m) Safe push-up in compliance with the standard Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area. Ladder width 420 mm, spacing between steps 235 mm. Ladder inclination 20. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. Fig Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Handrail, for self-installation. Length 750 mm, height 190 mm Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. For more information, please go to page Length 1300 mm, height 200 mm Length 2000 mm, height 200 mm Exit side-rail For safe exit and entry of ladders , page 214 Working height up to approx. m Overall length m Width of stabiliser bar m Base area m Number of steps Weight approx. kg * 40424* 40426* 58

59 Aluminium step ladders Straight ladder Straight ladder made of aluminium, with relax step Flexible use - intended purpose Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing. Permanent step-to-side-rail connection, non-slip nivello ladder shoes and ergo-pad grip area. Ladder width 420 mm, spacing between steps 235 mm. Ladder inclination 20. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation/attachment, e. g. ladders fixed with hooks or with straps 02 Aluminium step ladders clip-step and clip-step R 13 step padding You will find retrofit kits for these straight ladders in the Accessories and spare parts chapter. Example illustration, attaching the ladder with hooks Working height up to approx. m Overall length m Base area m Number of steps Weight approx. kg See the Accessories and Spare Parts chapter for suitable accessories for your ladder. Retrofit stabiliser for straight ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during push-up. For these ladders you can purchase the stabiliser (without nivello ladder shoe) as a retrofit kit. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

60 Aluminium step ladders step ladder 02 Aluminium step ladders Single-sided step ladder made of aluminium With large standing platform and tray Grooved steps with a depth of 80 mm. Permanent step-to-siderail connection, non-slip nivello ladder shoes and ergo-pad grip area. Large standing platform approx. 400 x 400 mm, tray at the top approx. 350 x 200 mm, foldable. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. 2 handrails approx. 750 mm long, for self-installation (from order no , 1,300 mm long). Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Fig Working height up to approx. m Total height m Platform height m Base spread m Bottom outside width m Number of steps including platform Weight approx. kg Single-sided step ladder made of aluminium, with castors and handle With large standing platform and tray Grooved steps with a depth of 80 mm. Permanent step-toside-rail connection, non-slip nivello ladder shoes, with 2 lifting castors Ø 125 mm, 2 handles, galvanised steel. Large standing platform approx. 400 x 400 mm, tray at the top approx. 350 x 200 mm, foldable. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. 2 handrails approx. 750 mm long, for self-installation (from order no , 1300 mm long). Rigid connection through metal struts detachable on both sides (instructions included). High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Fig Working height up to approx. m Total height m Platform height m Base spread m Bottom outside width m Number of steps including platform Weight approx. kg

61 Aluminium step ladders Platform ladder Single-sided platform ladder made of aluminium, movable With large standing platform Grooved steps with a depth of 80 mm. Permanent stepto-side-rail connection, non-slip nivello ladder shoes and 2 fixed castors Ø 125 mm with locking device. 2 handrails and railings with knee board. Large non-slip working platform approx. 510 x 600 mm with toe board round the edge. Platform ladder foldable thanks to screw-off diagonal braces - for space-saving storage. Support unit with stabilising stabiliser bar for high stability. Spacing between steps 235 mm, ladder inclination Aluminium step ladders Fig Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. For more information, please go to page Working height up to approx. m Total height m Platform height m Base spread m Bottom outside width m Number of steps including platform Weight approx. kg

62 Aluminium step ladders ML building site ladder 02 NEW! ML building site step ladder aluminium Grooved steps with a depth of 80 mm. Permanent step-to-side-rail connection. Large standing platform approx. 400 / 360 x 425 mm. Optimised 'safe-cap' ladder joint with larger contact area, 6-fold riveting and increased wall thickness for even more ladder stability and service life. 2 pre-mounted handrails. Spreader lock with 2 high-strength nylon straps. High stability thanks to conical design. Spacing between steps 235 mm, ladder inclination 20. Aluminium step ladders Fig Parallel side-rails for larger work area Handrail pre-mounted on both sides Fig

63 Aluminium step ladders ML building site ladder Accessories: Retrofit kit step padding clip-step: Optimised non-slip and safe steps, comfortable standing. Is clipped on to cover the entire surface precisely. Transport lifting roller for step ladders For the lower ladder end. When closed, the step ladder can be moved thanks to its Ø 125 mm lifting rollers. 1 set = 2 pcs. For more information, please see chapter Accessories and spare parts on page 215. Retrofit kit R 13 step padding clip-step: Certified non-slip covering. Improved work safety specially in wet and oily work environments. Is clipped on to cover the entire surface precisely. Side-rail extension Safe standing on uneven ground. Height-adjustable, can easily be fitted to the side-rail if necessary. Adjustment range max. 375 mm. For more information, please see chapter Accessories and spare parts on page Aluminium step ladders Stipulated by BG Bau! Working height up to approx. m Total height m Platform height m Base spread m Bottom outside width m Number of steps including platform Total length folded approx. m Platform height up to railing tube approx. m Handrail length approx. m Outer dimensions/ packing dimensions approx. m 2.06 x 0.60 x x 0.63 x x 0.65 x x 0.68 x x 0.71 x 0.28 Weight approx. kg Accessories Retrofit kit clip-step Retrofit kit clip step R Transport lifting roller Side rail extension climbing part Side rail extension support unit * Specification subject to conditions, for the latest information please visit the homepage of BG Bau. Since 2014, the BG Bau promotes the purchase of one-sided and double-sided platform ladders, step stools and ladder accessories. All members of the BG BAU profit from this. This aims to prevent accidents on building sites and improve ergonomics. For more information by BG BAU, please visit: 63

64 SMART TIPS! KEY FEATURES OF OUR WOODEN LADDERS! Tool tray years quality guarantee standard products Practical and matching tray for small parts and tools 03 Standard equipment Wooden ladders Bucket hook for straight ladders Side-rails made of knot-free wood Lasting Safe Rungs made of ash wood / beech Hard-wearing Mortised rung-to-side-rail connection Reduced risk of injuries and pleasant to the touch thanks to smooth side-rail surface EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days. See page 227 for detailed information 64

65 WOODEN LADDERS GS tested according to European Standard DIN EN 131, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet or (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. Straight ladder made of wood with standard stabiliser (* from 3.0 m) Safe ascent in compliance with the standard Side-rails made of knot-free Carolina pine, rungs made of ash, pegged rung-to-side-rail connection, thus smooth side-rail surface. Spacing between rungs 280 mm, ladder width 420 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. 03 Wooden ladders NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Fig Working height up to approx. m Ladder length m Width of stabiliser bar m Height of side-rails mm Number of rungs Weight approx. kg * 33116* 65

66 Straight ladder made of wood Wooden ladders Straight ladder Flexible use - intended purpose Side-rails made of knot-free Carolina pine, rungs made of ash, pegged rung-to-side-rail connection, thus smooth side-rail surface. Spacing between rungs 280 mm, ladder width 420 mm. 03 Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation / attachment, e. g. ladders fixed with hooks or with straps Wooden ladders Fig , attachment of the ladder with hooks NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Working height up to approx. m Ladder length m Height of side-rails mm Number of rungs Weight approx. kg Retrofit stabiliser for wooden straight ladders Retrofitted: Safe working in accordance with the standard Thanks to the retrofit stabiliser, on-site ladders can be retrofitted to comply with the standard and therefore ensure compliant working conditions. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. Symbol ladder retrofit kit Width of stabiliser bar m For information about retrofit kits and the current standard, see pages 8-9 and page

67 Wooden ladders Step ladder Double ladder made of wood Side-rails made of knot-free Carolina pine / fir, rungs made of ash / beech, pegged rung-to-side-rail connection, thus smooth side-rail surface, stable steel horseshoe hinge. Equipped with a practical bucket hook as standard. High stability thanks to spreader lock with 2 galvanised steel chains. Spacing between rungs 280 mm. + For free You will receive our free tool tray when you purchase these rung step ladders. 03 Wooden ladders NEW! Accessories: Wall bracket for ladder XL 19841, page 218 Fig Working height up to approx. m Ladder length m Base spread m Bottom outside width m Top outside width m Number of rungs 2 x 4 2 x 5 2 x 6 2 x 7 2 x 8 2 x 10 Weight approx. kg Further wooden ladders on request. 67

68 SMART TIPS! KEY FEATURES OF OUR REINFORCED FIBRE GLASS LADDERS! years quality guarantee standard products Tested for or 1000 Volt Safe working in an electrical environment 04 Edged steps / rungs rung-to-side-rail connection Reinforced fibre glass ladders Long-lasting and safe Very strong adhered/ clamp connection Long-lasting and safe nivello ladder shoes With movable joint for full-surface contact to the ground 4 times the supporting surface of our conventional ladder shoes ergo-pad grip area Ergonomically shaped grip area for easier and more convenient handling of our step ladders Attachment to optimum carrying point Integrated clamping mechanism secures the side-rails of the ladder when folded Protected by patented design no / EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 68

69 REINFORCED FIBRE GLASS LADDERS With design approval according to European Standard DIN EN 131, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet (formerly BGI/GUV-I-694) and applicable DGUV regulations. Double-sided step ladder made of reinforced fibre glass Tested according to DIN EN 131. The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Grooved aluminium steps with a depth of 80 mm with permanent step-to-side-rail connection. Side-rails made of reinforced fibre glass profile, non-slip nivello ladder shoes and ergo-pad grip area. High stability thanks to spreader lock with 2 high-strength nylon straps. Spacing between steps 235 mm, ladder inclination 20. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. 04 Reinforced fibre glass ladders Solid, durable hinge screw connection Fig Accessories: Retrofit kit step padding clip-step: Optimised non-slip property, safe step and comfortable standing, full-surface and precise-fitting, clipped to the step. Retrofit kit R 13 step padding clip-step: Certified non-slip surface, improved work safety, specially designed for wet and oily work environments. For more information, please see chapter Accessories and spare parts on page Working height up to approx. m Ladder length m Bottom outside width m Number of steps 2 x 4 2 x 6 2 x 8 2 x 10 2 x 12 Weight approx. kg

70 Straight ladder made of reinforced fibre glass Straight ladders Straight ladder made of reinforced fibre glass, with standard stabiliser 04 (* from 3.0 m) Safe ascent in compliance with the standard Tested according to DIN EN 131. The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Side-rails made of reinforced fibre glass profile. Aluminium square rungs 30 x 30 mm grooved on both sides, permanently edged to the side-rails. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. Spacing between rungs 280 mm, outside width 420 mm. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. Reinforced fibre glass ladders Fig Working height up to approx. m Ladder length m Width of stabiliser bar m Height of side-rails mm Number of rungs Weight approx. kg * 35314* 70

71 Straight ladder made of reinforced fibre glass Straight ladders Straight ladder made of reinforced fibre glass Flexible use - intended purpose taking the standard DIN EN 131 into account. The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Side-rails made of reinforced fibre glass profile. Aluminium square rungs 30 x 30 mm grooved on both sides, permanently edged to the side-rails, non-slip nivello ladder shoes. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. Spacing between rungs 280 mm, outside width 420 mm. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation / attachment, e. g. ladders fixed with hooks or with straps 04 Reinforced fibre glass ladders Fig , attachment of the ladder with hooks Working height up to approx. m Ladder length m Height of side-rails mm Number of rungs Weight approx. kg Straight ladder made of reinforced fibre glass, with 'roll-bar' stabiliser As above, however also with 'roll-bar' stabiliser. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Number of rungs Weight approx. kg Width of stabiliser bar m

72 Plastic ladders push-up and rope-operated ladder 04 Reinforced fibre glass ladders Push-up and rope-operated ladder, 2-section, with standard- stabiliser Safe ascent in compliance with the standard Tested according to DIN EN 131. The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Stable metal guide fixtures, side-rails made from reinforced fibre glass profile, aluminium rungs. Spacing between rungs 280 mm, outside width 420 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. At least 10 years of resistance to ageing of the reinforced fibre glass profiles push-up extension ladder, adjustment from rung to rung by hand, both ladder units can be used separately. Ladder parts are not separable for order no , but with wall rollers at top rope-operated extension ladder, adjustment by rope pulley, automatic locking hooks, wall wheels at the top. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. Fig Working height up to approx. m Extended ladder length m Retracted ladder length m Width of stabiliser bar m Height of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 Weight approx. kg

73 Plastic ladders push-up and rope-operated ladder Push-up and rope-operated extension ladder made of reinforced fibre glass, 2-section Flexible use - intended purpose Taking the standard DIN EN 131 into account. The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Stable metal guide fixtures, side-rails made from reinforced fibre glass profile, aluminium rungs, non-slip nivello ladder shoes. Spacing between rungs 280 mm, outside width 420 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. At least 10 years of resistance to ageing of the reinforced fibre glass profiles push-up extension ladder, adjustment from rung to rung by hand, both ladder units can be used separately, order no with wall wheels at the top rope-operated extension ladder, adjustment by rope pulley, automatic locking hooks, wall wheels at the top. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation / attachment, e. g. ladders fixed with hooks or with straps 04 Reinforced fibre glass ladders Fig , attachment of the ladder with hooks Working height up to approx. m Extended ladder length m Retracted ladder length m Height of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 Weight approx. kg Push-up and rope-operated extension ladder made of reinforced fibre glass, with 'roll-bar' stabiliser As above, however also with 'roll-bar' stabiliser. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 2 x 18 2 x 20 Weight approx. kg Width of stabiliser bar m

74 Ladders made of reinforced fibre glass Platform ladder 04 Reinforced fibre glass ladders Platform ladder made of reinforced fibre glass mobile, foldable In accordance with European standard DIN EN 131-7, DGUV information sheet or (formerly BGI 637 or GUV-I 637). The version takes section of EN 61478: A1:2004 category 1 up to 1000 Volt into account. Grooved aluminium steps with a depth of 80 mm, permanently edged to the side-rails, side-rails made of reinforced fibre glass profile. Spacious platform 650 x 600 mm made of reinforced fibre glass grating. Handrail on both sides made of aluminium (made of reinforced fibre glass on request), platform railing on three sides. Safe standing ensured by non-slip nivello ladder shoes and stabiliser bar with 2 lockable fixed castors. Simple to fold up thanks to automatically locking steel hinges, space-saving storage. With large tray at the top. Ladder width 650 mm. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. Fig Working height up to approx. m Platform height up to approx. m Height including railing m Base spread m Cross-tube width approx. m Number of steps incl. platform Weight approx. kg

75 Ladders made of reinforced fibre glass Step ladder Double-sided step ladder made of solid reinforced fibre glass Tested according to DIN EN 131. The version takes EN 61478:2002 (Cat. 1: Volt) into account. Side-rails and rungs made of reinforced fibre glass, without filling material. Non-slip rungs, 28 x 29 mm, grooved on both sides. High-strength rung-to-side-rail connection, non-slip nivello ladder shoes. High stability thanks to conical design. Spacing between rungs 280 mm, ladder inclination 20. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. + For free You will receive our free tool tray when you purchase these rung step ladders. 04 Reinforced fibre glass ladders Solid, durable hinge screw connection Fig Working height up to approx. m Ladder length m Bottom outside width m Height of side-rails mm Number of rungs 2 x 4 2 x 5 2 x 6 2 x 8 2 x 10 2 x 12 2 x 14 Weight approx. kg NEW! Accessories: Wall-mounted ladder holder XL For the space-saving storage of ladders on the wall. For more information, please see chapter Accessories and spare parts on page

76 Straight ladder made of reinforced fibre glass Straight ladders Straight ladder made of reinforced fibre glass, with standard stabiliser 04 (* from 3.0 m) Safe ascent in compliance with the standard Tested according to DIN EN 131. The version takes EN 61478:2002 (Cat. 1: Volt) into account. Side-rails and rungs made of reinforced fibre glass, without filling material. Non-slip rungs, 28 x 29 mm, grooved on both sides. Very strong rung-to-side-rail connection. Spacing between rungs 280 mm, outside width 420 mm. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. Reinforced fibre glass ladders Fig Working height up to approx. m Ladder length m Width of stabiliser bar m Height of side-rails mm Number of rungs Weight approx. kg * 36814* 76

77 Straight ladder made of reinforced fibre glass Straight ladders Straight ladder made of solid reinforced fibre glass Flexible use - intended purpose Taking the standard DIN EN 131 into account. The version takes EN 61478:2002 (Cat. 1: Volt) into account. Side-rails and rungs made of reinforced fibre glass, without filling material. Non-slip rungs, 28 x 29 mm, grooved on both sides.high-strength rung-to-side-rail connection, non-slip nivello ladder shoes. Spacing between rungs 280 mm, outside width 420 mm. At least 10 years of resistance to ageing of the reinforced fibre glass profiles. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation / attachment, e. g. ladders fixed with hooks or with straps 04 Reinforced fibre glass ladders Fig , attachment of the ladder with hooks Working height up to approx. m Ladder length m Height of side-rails mm Number of rungs Weight approx. kg Straight ladder made of solid reinforced fibre glass, with 'roll-bar' stabiliser As above, however also with 'roll-bar' stabiliser. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Number of rungs Weight approx. kg Width of stabiliser bar m

78 Ladders made of reinforced fibre glass push-up and rope-operated ladder 04 Reinforced fibre glass ladders Push-up and rope-operated ladder, 2-section, with standard- stabiliser Safe ascent in compliance with the standard Push-up extension ladder tested according to DIN EN 131. The version takes EN 61478:2002 (Cat. 1: Volt) into account. Rope-operated extension ladder tested according to DIN EN 131. The version takes EN 61478:2002 (1000 Volt) into account. Side-rails and rungs made of reinforced fibre glass, without filling material, fittings made of galvanised steel. Non-slip rungs, 28 x 29 mm, grooved on both sides. Very strong rung-to-side-rail connection. Spacing between rungs 280 mm, outside width 420 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. At least 10 years of resistance to ageing of the reinforced fibre glass profiles to push-up extension ladder: Adjustment from rung to rung by hand, both ladder units can be used separately. Ladder parts are not separable for order no to rope-operated extension ladder: Adjustment by rope pulley, automatic locking hooks, with wall wheels at the top The standard stabiliser ensures a safe stance for straight ladders in excess of 3.0 m. Optimum stabiliser widths in combination with non-slip ladder shoes improve safety during ascent. Fig Working height up to approx. m Extended ladder length m Retracted ladder length m Width of stabiliser bar m Height of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 Weight approx. kg

79 Plastic ladders push-up and rope-operated ladder Push-up and rope-operated ladder 2-section Flexible use - intended purpose Push-up ladder taking the standard DIN EN 131 into account The version takes EN 61478:2002 (Cat. 1: Volt) into account. Rope-operated ladder taking the standard DIN EN 131 into account. The version takes EN 61478:2002 (1000 Volt) into account. Side-rails and rungs made of reinforced fibre glass, without filling material, fittings made of galvanised steel. Non-slip rungs, 28 x 29 mm, grooved on both sides. High-strength rung-to-side-rail connection, non-slip nivello ladder shoes. Spacing between rungs 280 mm, outside width 420 mm. In compliance with DIN EN 131-1, the attached push-up ladder part cannot be removed from the ladder when the ladder is more than 3.0 m long. At least 10 years of resistance to ageing of the reinforced fibre glass profiles to push-up extension ladder: Adjustment from rung to rung by hand, both ladder units can be used separately to rope-operated extension ladder: Adjustment by rope pulley, automatic locking hooks, with wall wheels at the top. Note: all kinds of straight ladders with a length over 3.0 m All straight ladders are available without stabilizers as before, if they are used exclusively as intended. Examples: permanent installation / attachment, e. g. ladders fixed with hooks or with straps Fig , attachment of the ladder with hooks Working height up to approx. m Extended ladder length m Retracted ladder length m Height of side-rails mm Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 Weight approx. kg Reinforced fibre glass ladders Straight ladder made of solid reinforced fibre glass with 'roll-bar' stabiliser As above, however also with 'roll-bar' stabiliser. Since the wheels can be tilted in no time, they allow fast and back-friendly movement of the ladder from location to location. The 'roll-bar' stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Number of rungs 2 x 8 2 x 10 2 x 12 2 x 14 2 x 16 Weight approx. kg Width of stabiliser bar m

80 SMART TIPS! KEY FEATURES OF OUR SHELF LADDERS! years quality guarantee standard products Hang-in, mobile, movable or turnable shelf ladders Solutions for all shelf systems Rail system Precise fit Easy installation 05 Shelf ladders Standard lengths and custom-made dimensions Precise fit and flexible for all requirements Alternative step configurations relax step step padding for comfortable and fatigue-free standing clip-step and clip-step R 13 step padding with high non-slip surface for our steps - Retrofit kits on request EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 80

81 SHELF LADDERS With design approval according to European Standard DIN EN 131, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. Shelf ladders are manufactured in the standard lengths shown below and made to size. Please always specify the exact vertical height. Hang-in shelf ladder made of aluminium Grooved steps with a depth of 80 mm, permanent step-to-side-rail connection, non-slip ladder shoes, upper end with 2 support and parking hooks Ø 35 mm. Ladder width 420 mm, spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Working height up to approx. m Ladder length m Vertical hook-in height m Base area m Number of steps Weight approx. kg Shelf ladders Fig Hang-in shelf ladder made of aluminium, with relax step Grooved steps with a depth of 80 mm with convenient relax step step padding for comfortable and safe standing, permanent step-to-side-rail connection, non-slip ladder shoes, the top end with 2 support and parking hooks Ø 35 mm each. Ladder width 420 mm, spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Working height up to approx. m Ladder length m Vertical hook-in height m Base area m Number of steps Weight approx. kg Fig

82 Mobile shelf ladder made of aluminium Shelf ladders Movable shelf ladders Grooved steps with a depth of 80 mm, permanent step-to-side-rail connection, non-slip ladder shoes at the bottom, lower end with 2 self-locking braking castors Ø 80 mm, smooth-running chassis at the upper end, ladder can be stored vertically at the shelf. Ladder width 420 mm, ladder width incl. castors 600 mm. Spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Fig Shelf ladders Working height up to approx. m Vertical hook-in height m Base area m Number of steps Weight approx. kg Mobile shelf ladder made of aluminium with relax step Grooved steps with a depth of 80 mm, with convenient relax step step padding for comfortable and safe standing, permanent step-to-side-rail connection, non-slip ladder shoes at the bottom, lower end with 2 self-locking braking castors Ø 80 mm, smooth-running chassis at the upper end, ladder can be stored vertically at the shelf. Ladder width 420 mm, ladder width incl. castors 600 mm. Spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Example illustration Working height up to approx. m Vertical hook-in height m Base area m Number of steps Weight approx. kg

83 Shelf ladders Shelf ladders for double shelf Shelf ladder made of aluminium for double shelf for moving to the side Grooved steps with a depth of 80 mm, permanent step-to -side rail connection, max. aisle width 1.60 m, width variations of up to 20 mm are compensated by the chassis. Please indicate vertical rail height, aisle width and aisle length. Ladder width 400 mm, ladder width incl. castors 580 mm. Spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Fig Shelf ladders Working height up to approx. m Ladder length m Vertical hook-in height m Base area m Number of steps Weight approx. kg Shelf ladder made of aluminium for double shelf, rotatable Grooved steps with a depth of 80 mm, permanent step-to -side rail connection, max. aisle width 1.60 m, width variations of up to 20 mm are compensated by the chassis. Please indicate vertical rail height, aisle width and aisle length. Ladder width 400 mm, ladder width incl. castors 580 mm. Spacing between steps 235 mm, ladder inclination 20. Note: We also manufacture shelf ladders in the exact vertical hook-in height you require. The price charged is the price of the next higher ladder plus a flat rate modification fee. Shelf ladders made to size are non-returnable. Example illustration Working height up to approx. m Ladder length m Vertical hook-in height m Base area m Number of steps Weight approx. kg Storage Rail system for shelf ladders Aluminium tube Ø 30 mm, 3000 mm long anodised Tube Ø 30 mm, 3000 mm long steel / galvanised Intermediate bracket (1 pce. required for every 1 m tube) 30310* Bracket with end stop right 30311* 30312* Bracket with end stop left * Mounting material is not included in the scope of delivery Aluminium tube Ø 30 mm, 3000 mm long Vertical height Rail system 8.5 Fig. Aluminium tube with bracket, with end stop right and left 83

84 SMART TIPS! KEY FEATURES OF OUR WORKING PLATFORMS! years quality guarantee standard products Enlarged working area Safe standing High-quality welded tubular frame design Maximum stability and durability 06 Working platforms Step stools Rating of the non-slip surface from R 10 R 13 Safe ascent and descent as well as working at a height guaranteed Outer shoes made of plastic (TPE) Very good chemical and thermal resistance High impact and friction resistance EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days available for delivery within 5 days. See page 227 for detailed information 84

85 WORKING PLATFORMS STEP STOOLS With design approval according to European Standard DIN EN 14183, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121, German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. Plastic wheeled step stool Easy to move thanks to 3 spring-mounted castors. Automatic lowering under load with brake and deflector ring. High stability thanks to non-slip, comfortable base. Made of sturdy, recyclable PE material, UV-stabilised. Colour: Light grey RAL Working height up to approx. m 2.50 Loaded height m 0.43 Unloaded height m 0.44 Ø top m 0.30 Ø centre m 0.37 Ø bottom m 0.45 Weight approx. kg Folding steps made of aluminium Foldable in no time, sturdy double side-rails, with non-slip step cover (205 x 360 mm) and non-slip ladder shoes. Only 85 mm in depth when folded. Working height up to approx. m Height of the top step m external width m Base spread m Number of steps 2 3 Weight approx. kg * * Fig Working platforms Step stools Folding steps made of aluminium, with foldable bracket With practical tray. Foldable in no time, sturdy double side-rails, with non-slip step cover (205 x 360 mm) and non-slip ladder shoes. Only 125 mm in depth when folded. Fig Fig Product video Folding steps made of aluminium Working height up to approx. m Height of the top step m external width m Base spread m Number of steps Weight approx. kg * * * * Subject to technical modifications and modifications in the configuration as well as model change. Fig Fig

86 Work platforms, step stools Work platforms, step stools ML Compact step stool Stable, foldable design. Large stepping surfaces with steps made of chequered aluminium plate. Space-saving storage. Working height up to approx. m Number of steps 2 3 Height of the top step m Top surface W x D m 0.23 x x 0.36 Base area W x D m 0.49 x x 0.80 Dimensions when folded W x H x D m 0.49 x 0.55 x x 0.55 x 0.07 Weight approx. kg Fig Folded Single-sided foldable working platform made of aluminium Sturdy rectangular tube side-rails made of aluminium, grooved steps with a depth of 80 mm, top surface made of grooved aluminium profilel, non-slip nivello ladder shoes, platform foldable. Working platforms Step stools Folded Working height up to approx. m Platform height m Top surface approx WxD m 0.65 x x 0.30 Base area WxD m 0.76 x x 0.83 Transport dimension WxD m 0.96 x 0.80 x x 0.83 x 0.17 Number of steps 3 4 Weight approx. kg Fig Double-sided working platform, foldable Sturdy rectangular tube side-rails made of aluminium, grooved steps with a depth of 80 mm, upper standing surface made of grooved aluminium profile, plastic shoes, platform foldable. Working height up to approx. m Platform height m Top surface approx WxD m 0.52 x x x 0.33 Base area WxD m 0.62 x x x 0.62 Transport dimension WxD m 0.33 x x x 1.05 Number of steps 2 x 2 2 x 3 2 x 4 Weight approx. kg Fig

87 Work platforms, step stools Step stools Working stand made of aluminium, fixed Particularly stable construction made of rectangular aluminium bar side-rails with load up to 300 kg. Steps with a depth of 200 mm, non-slip grooved. Non-slip plastic shoes on the ends of the side-rails. Shipment in disassembled parts. Assembly instructions included. Working height up to approx. m Platform height m Top surface W x D m 0.50 x x x x 0.30 Base area WxD m 0.57 x x x x 1.23 Number of steps Weight approx. kg Working stand made of aluminium, fixed with handrail Particularly stable construction made of rectangular aluminium bar side-rails with load up to 300 kg. Steps with a depth of 200 mm, non-slip grooved. Non-slip plastic shoes on the ends of the side-rails. High safety level thanks to one-sided handrail 900 mm high. Shipment disassembled, easy assembly, assembly instructions included. Fig Working platforms Step stools Working height up to approx. m Platform height m Top surface W x D m 0.50 x x x x 0.30 Base area W x D m 0.57 x x x x 1.23 Number of steps Weight approx. kg Fig Accessories: 1 set = 2 pcs. lifting castors of Ø 125 mm for selfinstallation

88 Work platforms, step stools Work platforms Single-sided working platform made of aluminium Stable welded round aluminium tube construction, top surface approx 410 x 300 mm for comfortable and safe standing. Side-rail ends with non-slip plastic shoes. Shipment in disassembled parts. Assembly instructions included. Step and platform version: Grooved aluminium Working height up to 2.50 approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area W x D m 0.54 x x x 1.00 Number of steps Weight approx. kg Fig with 4 pcs. spring-loaded braking castors order no Working platforms Step stools Step and platform version: wood Working height up to approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area WxD m 0.54 x x x 1.00 Number of steps Weight approx. kg Fig Step and platform version: steel grating Working height up to approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area WxD m 0.54 x x x 1.00 Number of steps Weight approx. kg Fig Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation suitable for platforms with 2 steps suitable for platforms with 3-4 steps Fig /

89 Work platforms, step stools Work platforms Working platform made of aluminium, double-sided Stable welded round aluminium tube construction, top surface approx 410 x 300 mm for comfortable and safe standing. Side-rail ends with non-slip plastic shoes. Shipment in disassembled parts. Assembly instructions included. Step and platform version: Grooved aluminium Working height up to approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area WxD m 0.54 x x x 1.50 Number of steps 2 x 2 2 x 3 2 x 4 Weight approx. kg Fig with 4 pcs. spring-loaded braking castors order no Step and platform version: wood Working height up to approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area WxD m 0.54 x x x 1.50 Number of steps 2 x 2 2 x 3 2 x 4 Weight approx. kg Working platforms Step stools Fig Step and platform version: steel grating Working height up to approx. m Platform height m Top surface W x D m 0.41 x x x 0.30 Base area WxD m 0.54 x x x 1.50 Number of steps 2 x 2 2 x 3 2 x 4 Weight approx. kg Fig Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation suitable for platforms with 2 steps suitable for platforms with 3-4 steps Fig /

90 Work platforms, step stools Step stools Steel and wood step stool Steps with a depth of 150 mm, coated, cover panel with hand opening, side-rails made of steel, grey coated (RAL 7023), non-slip ladder shoes. Working height up to approx. m Height of the cover board m Base area WxD m 0.46 x x x 1.00 Number of steps including cover board Weight approx. kg Fig Steel and wood step stool with braked fixed castors Construction as before, but complete with 1 set (= 4 pcs.) braked fixed castors for self-installation. The castors have been designed for movement in longitudinal direction and brake automatically when someone steps on the stool. Working platforms Step stools Working height up to approx. m Height of the cover board m Base area WxD m 0.46 x x x 1.00 Number of steps including cover board Weight approx. kg Fig Steel and wood step stool with braked swivel castors Construction as before, but complete with 1 set (= 4 pcs.) braked swivel castors for self-installation. In this construction, the step stool can be rotated on the spot or moved round corners. The castors brake automatically when someone steps on the stool. Working height up to approx. m Height of the cover board m Base area WxD m 0.46 x x x 1.00 Number of steps including cover board Weight approx. kg Fig Shipment disassembled, assembly instructions included.

91 Work platforms, step stools Bridging platforms Bridging platform made of aluminium, folding Stable structure, non-slip surface thanks to replaceable platform board, bases can be folded using snap fasteners, solid fittings. Safe and comfortable working on spacious platform area (1700 x 600 mm). Ascent and descent via grooved steps with a depth of 80 mm. The maximum load of 300 kg allows 2 people to work at the same time and offers sufficient capacity for working equipment and material. Spacing between steps 235 mm. Working height up to approx. m 2.70 Base area m 2.17 x 0.66 Platform size W x D m 1.70 x 0.60 Platform height m 0.69 Transport dimensions W x H x D m 1.70 x 0.66 x 0.19 Load maximum kg Weight approx. kg Fig ML aluminium bridging platform with folding feet Stable construction, platform made of chequered aluminium plate, feet hinged for folding down, non-slip plastic shoes. Safe and comfortable working on spacious base. 06 Working platforms Step stools Working height up to approx. m Base area m 1.64 x x 0.70 Platform size W x D m 1.30 x x 0.29 Platform height m Transport dimensions W x 1.30 x 0.45 x 0.11 H x D m 1.74 x 0.70 x 0.11 Load maximum kg Weight kg Fig Accessories: Wall-mounted ladder holder L For the space-saving storage of ladders on the wall. Suitable for all single-sided step ladders (including step ML) and all rung step ladders depth of side-railst 58 mm as well as for folding platforms with order no and

92 NEW! Work platforms, step stools Flexxwork FlexxWork. The flexible working platform. The system. 06 Working platforms Step stools 92

93 Work platforms, step stools Flexxwork NEW! 06 FlexxWork < Modular work plank system < Variable platform heights < Diverse assembly and application options < Assembly without tools < Up to a work height of 3.0 m < Ideal packaging dimensions only 1.20 x 0.60 m < Lightweight and easily expandable < Patent registered (# ) Working platforms Step stools 93

94 NEW! Work platforms, step stools Flexxwork 06 Working platforms Step stools FlexxWork FlexxWork. The flexible platform. The system. FlexxWork is a flexible work plank with a modular system that offers you a wide variety of assembly and application options. You can reach various working heights thanks to variable platform heights. Various assembly variants are possible with few modules. Flexible, fast and above all without tools. FlexxWork iis easy to handle and has compact packaging dimensions for easy transport and space-saving storage. Be it on the construction site, in industry and trade, the public purse, by fire, rescue and disaster services and also privately at home. Be it indoors or outdoors: FlexxWork is a versatile work plank that is an all-round talent for all work at FlexxWork. The flexible platform. The system. Diverse assembly and application options elevated workplaces up to 3.0 m that adapts to personal work situations. The system is assembled completely tool-free by means of an innovative plug system (patent registered (# ) and allows safe working at heights. FlexxWork can be assembled at various platform heights or even in longitudinal and cross-wise step-like constructions. Our tip: Drive work equipment and material onto the platform in a way that goes easy on your back by building an access ramp using the modules. The system can be infinitely expanded easily and inexpensively using the basic units and the expansion units. FlexxWork is a work plank system with numerous options. Various platform heights, an expansion in a longitudinal and parallel direction and also an access ramp offer variable combinations that can be expanded as required. watch. understand. be inspired. Discover the many options of the FlexxWork. Now watch the extensive video! More at: /flexxwork 94

95 Work platforms, step stools Flexxwork FlexxWork basic and expansion units Sturdy design in a modular system with aluminium extruded profiles, platforms with non-slip wooden platform board, innovative and very strong plug system (patent registered (# ), non-slip plastic end caps with integrated inner threads for compensation foot. Tool-free assembly. Space-saving transport and storage. Basic unit L 1x platform, 2x connecting units, 2x support frames, 16x fuse sockets Working height up to approx. m 2.37 Base area m 1.36 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.37 Load maximum kg 150 Weight kg Basic unit XL 1x platform, 1x step-on step, 2x connecting struts, 2x support frames 18x fuse sockets Working height up to approx. m 2.97 Base area m 1.47 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.97 Load maximum kg 150 Weight kg Extension unit L 1x platform, 2x connecting struts, 1x support frame, 16x fuse sockets 06 Working platforms Step stools Working height up to approx. m 2.37 Base area m 1.37 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.37 Load maximum kg 150 Weight kg Extension unit XL 1x platform, 2x connecting struts, 1x support frame, 16x fuse sockets Working height up to approx. m 2.97 Base area m 1.47 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.97 Load maximum kg 150 Weight kg

96 Work platforms, step stools Flexxwork FlexxWork basic and expansion units 3-F The basic and expansion units with a triple frame (3-F) expand the application options. The 3-F frames allow parallel assembly of the various units. The technical aspects of the design is identical to the basic and expansion units L and XL (see previous page). Basic unit L, 3-F 1x platform, 2x connecting units, 2x support frames, 16x fuse sockets Working height up to approx. m 2.37 Base area m 1.36 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.37 Load maximum kg 150 Weight kg Working platforms Step stools Basic unit XL, 3-F 1x platform, 1x step-on step, 2x connecting struts, 2x support frames 18x fuse sockets Working height up to approx. m 2.97 Base area m 1.46 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.97 Load maximum kg 150 Weight kg Expansion unit L, 3-F 1x platform, 2x connecting struts, 1x support frame, 16x fuse sockets Working height up to approx. m 2.37 Base area m 1.36 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.37 Load maximum kg 150 Weight kg Expansion unit XL, 3-F 1x platform, 2x connecting struts, 1x support frame, 16x fuse sockets Working height up to approx. m 2.97 Base area m 1.47 x 0.60 Platform size W x D m 1.20 x 0.60 Platform height m 0.97 Load maximum kg 150 Weight kg

97 Work platforms, step stools Flexxwork FlexxWork Single parts and accessories Connecting brace Can be combined with all basic and expansion unit and all support frames Weight kg Support frame L Can be combined with all basic and expansion unit and all support frames and the platform Weight kg Step-on step Can be combined with all XLexpansion units and all XL-support frames Weight kg Support frame XL Can be combined with all basic and expansion unit and all support frames and the platform Weight kg Support frame L 3-F Can be combined with all basic and expansion unit and all support frames and the platform Fuse sockets To safeguard all parts with each other. 1 set = 6 pcs Compensation foot To compensate uneven floors by means of a ball joint 06 Working platforms Step stools Weight kg Support frame XL 3-F Can be combined with all basic and expansion unit and all support frames and the platform Weight kg Access ramp Barrier-free ramp access and exist Weight kg Platform Suitable for all basic and expansion units with non-slip wooden platform board Weight kg Bridge segment Connecting element for seamless coupling of all FlexxWork units Weight kg

98 Work platforms, step stools Work platforms Modular working platform Versatile welded construction with a rectangular side-rails made of aluminium. Steps made of chequered aluminium plate. Step dimensions: 555 x 250 mm. Plastic shoes on the ends of the side-rails. The basic module can be extended individually using an additional module. The extension module can only be used in connection with the basic module. Simple installation. Assembly instructions included. Wheels are available as optional equipment for changing locations and floor brackets for stationary use as an option. Do you want an individual bridging step? Our bridging step module is available for connecting two working platforms together so that you get a walkway with access at both sides Complete set-up with basic and extension modules 06 Working platforms Step stools Fig with order no Basic module order no Extension module 3 order no Basic module order no with extension module 1 order no Extension module 4 order no Extension module 2 order no Bridging step module order no Accessories: Floor mounting bracket (1 set = 2 pcs.) Fixed castors (1 set = 2 pcs.) Ø 50 mm for self-installation Fig Fig Name of the itern Basic module Working height up to approx. m Expansion module 1 Expansion module 2 Expansion module 3 Expansion module Platform height m Bridging step module Base area W x D 0.63 x x x x x x 0.56 Number of steps 2 2. step 3. step 4. step 5. step Weight approx. kg

99 Work platforms, step stools Work platforms Working platform, stackable Stable, torsion-free aluminium structure. Platform cover made of non-slip chequered aluminium plate. Non-slip plastic shoes on the ends of the side-rails. Large bases on 3 steps, space-saving storage as they are safely stackable. Other dimensions on request. 06 Fig Working platforms Step stools Working height up to approx. m 2.70 Platform height m 0.68 Top surface approx m 0.50 x 1.00 Transport dimensions W x H x D m 1.30 x 0.68 x 0.97 Load maximum kg Number of steps 3 Weight approx. kg

100 Work platforms, step stools Work platforms Fixed working platform made of aluminium Sturdy, welded tube construction, steps made of chequered aluminium plate, side-rail ends with non-slip plastic shoes. Top base: 550 x 300 mm. 06 Working platforms Step stools Fig Fig Product video Working platform made of aluminium Fig Fig Fig Fig Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation* set = 2 pcs. lifting castors of Ø 125 mm for self-installation Fig Fig Fig set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation * not for order no Working height up to approx. m Platform height m Base area W x D m 0.59 x x x x x 1.39 Number of steps Weight approx. kg

101 Work platforms, step stools Work platforms Fixed working platform made of aluminium, with handrail Sturdy, welded tube construction, steps made of chequered aluminium plate, side-rail ends with non-slip plastic shoes. High safety level thanks to one-sided handrail 600 mm high. The handrail is easy to screw in place (bore holes on the right) and is included separately. Top base: 550 x 300 mm. Product video Working platform made of aluminium Fig Working platforms Step stools Fig Fig Fig Fig with Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation* set = 2 pcs. lifting castors of Ø 125 mm for self-installation set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation Fig Fig Fig * not for order no Working height up to approx. m Platform height m Total height m Base area W x D m 0.74 x x x 1.39 Number of steps Weight approx. kg

102 Work platforms, step stools platforms Fixed working platform made of aluminium R13 Sturdy, welded tube construction, steps made of aluminium. Safety steps with certified non-slip surface R 13 Side-rail ends with non-slip plastic shoes. Top base: 550 x 300 mm. 06 Working platforms Step stools Fig Fig Covering R 13 Fig Fig Fig Fig Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation* set = 2 pcs. lifting castors of Ø 125 mm for self-installation Fig Fig Fig set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation * not for order no Fig. Working height up to approx. m Fig. Order 2.20 no Fig Fig Platform height m Base area W x D m 0.59 x x x x x 1.34 Number of steps Weight approx. kg

103 Work platforms, step stools platforms Working platform made of aluminium R13 fixed, with handrail Sturdy, welded tube construction, steps made of aluminium. Safety steps with certified non-slip surface R 13 Side-rail ends with non-slip plastic shoes. High safety level thanks to a one-sided handrail 600 mm high. The handrail is easy to screw in place (bore holes on the right) and is included separately. Top base: 550 x 300 mm. 06 Covering R 13 Fig Working platforms Step stools Fig Fig Fig Fig with Accessories: 1 set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation* set = 2 pcs. lifting castors of Ø 125 mm for self-installation set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation Fig Fig Fig * not for order no Working height up to approx. m Platform height m Total height m Base area W x D m 0.75 x x x 1.34 Number of steps Weight approx. kg

104 Work platforms, step stools platforms Working platform made of aluminium, movable, with steel grating Sturdy, welded tube construction, steps made of non-slip steel grating, side-rail ends with non-slip plastic shoes. Movable through 2 lifting castors. Top base: 550 x 300 mm. 06 Working platforms Step stools Fig Steel grating covering Product video Working platform made of aluminium Fig Fig Fig Fig Accessories: 1 set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation Fig Working height up to approx. m Platform height m Base area W x D m 0.69 x x x x 1.46 Number of steps Weight approx. kg

105 Work platforms, step stools platforms Working platform made of aluminium, movable, with steel grating, with handrail Sturdy, welded tube construction, steps made of non-slip steel grating, side-rail ends with non-slip plastic shoes. Movable through 2 lifting castors. High safety level thanks to a one-sided handrail 600 mm high. The handrail is easy to screw in place (bore holes on the right) and is included separately. Top base: 550 x 300 mm. Product video Working platform made of aluminium Steel grating covering Fig Working platforms Step stools Fig Fig Fig Fig Accessories: 1 set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation Fig Working height up to approx. m Platform height m Total height m Base area W x D m 0.73 x x x 1.46 Number of steps Weight approx. kg

106 Work platforms, step stools Work platforms 06 Working platforms Step stools Fig Movable working platform made of aluminium Particularly stable construction, sturdy rectangular tube side-rails, platform depth 400 mm, extendable with a spacing of 200 mm. With 2 sliding handles and 2 fixed castors, Ø 125 mm, non-slip ladder shoes. Inclination 45. Load up to 200 kg. On request, for the same price, also available without handles and castors but with 4 mounting brackets instead. Please indicate on order. Step and platform version: grooved aluminium Working height up to approx. m Platform height m Base area m Number of steps Step width 600 mm Weight approx. kg Step and platform version: steel grating Working height up to approx. m Platform height m Base area m Number of steps Step width 600 mm Weight approx. kg Step width 800 mm Weight approx. kg Step width 800 mm Weight approx. kg Step width 1000 mm Weight approx. kg Step width 1000 mm Weight approx. kg

107 Work platforms, step stools Work platforms Accessories: Railing Made of round aluminium tube of Ø 40 mm. With knee and toe board. Simple installation. Side railing suitable for left or right at choice. Side railing, suitable for 2 steps onesided Side railing, suitable for 3 steps onesided Side railing, suitable for 4 steps onesided Side railing, suitable for 5 steps onesided Front-end railing 600 mm wide Fig with a handrail order no and additionally with front-end railing order no Front-end railing 800 mm wide Front-end railing 1000 mm wide Set of castors, strong construction Fig NEW! Fig Working platforms Step stools Transport handle Hinged transport handle for railings of Ø 40 mm. The transport handle can be clamped to railing tubes of Ø 40 mm later

108 Work platforms, step stools accessory platforms Accessories: NEW! Front-end railing for work platform High level of safety thanks to 600 mm high sturdy railing made of aluminium tube. The railing is completely preassembled and easy to screw on. Only possible in connection with handrails on both sides. Outside dimension W x D m 0.62 x 0.59 Packaging dimensions m 0.62 x 0.59 x 0.75 Weight approx. kg Fig NEW! 2. Handrail bracket The safety of the work platform is imporved with the handrail. For an all-round railing two handrails art.no and a front-end railing art. No are required. Working platforms Step stools Outside dimension W x D m 0.59 x 1.02 Packaging dimensions m 0.59 x 1.02 x 0.50 Weight approx. kg Fig set = 4 pcs. spring-loaded braking castors Ø 50 mm for self-installation* set = 2 pcs. lifting castors of Ø 125 mm for self-installation Fig Fig * not for order no set = 4 pcs. foot plates Ø 80 mm with rubber cover, mobile support, with height adjustment, for self-installation Fig

109 Work platforms, step stools machine platforms ML machine platform height adjustable Sturdy design, non-slip surface thanks to platform board, feet by means of snap fasteners, 2-fold hinges for 3 working heights 2250 / 2500 / 2750 mm, solid fittings. Safe and comfortable working on spacious base (1700 x 600 mm). Ascent and descent via grooved steps with a depth of 65 mm. The maximum load of 300 kg allows 2 people to work at the same time and offers sufficient capacity for working equipment and material. NEW! 06 Fig Working platforms Step stools Working height up to approx. m 2.25 / 2.50 / 2.75 Platform height m 0.25 / 0.48 / 0.73 Base area at height 0.25 m 1.71 x 0.73 Base area at height 0.49 m 2.00 x 0.73 Base area at height 0.74 m 2.20 x 0.73 Packaging dimensions m 1.71 x 0.74 x 0.25 Load maximum kg 300 Weight approx. kg

110 SMART TIPS! KEY FEATURES OF OUR PLATFORM LADDERS! years quality guarantee standard products Accessories Handrails and central lever gears for individual complementation 07 Platform ladders Large stepping and standing surfaces Safe, comfortable, fatigue-free working even with tools and for longer periods of time Surface materials Non-slip version for safe standing Aluminium, wood, steel, steel grating, can be chosen suitable for the purpose Movable with lockable castors Quick and simple change of location EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 110

111 PLATFORM LADDERS With design approval according to European Standard DIN EN 131-7, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121 and applicable German Social Accident Insurance (DGUV) regulations. Platform ladder FlexxStep The stable aluminium design in industrial quality offers edged rungs for safe ascent to the spacious platform with the grooved aluminium cover. With handrail, platform railing on three sides and knee bar for safe walking and standing. Suitable for working for longer periods as well. Even with tool and working equipment. The self-closing safety door is a safety highlight that rounds off the complete package. Thanks to a flexible telescopic section, FlexxStep can be extended in only a few moments and without tools, making it vertically adjustable and suitable for use on stairs. Integrated castors and a practical folding mechanism permit a fast change of location and turn the FlexxStep platform ladder into flexible working equipment. Technical overview: Version in accordance with DIN EN and the French standard NFP /353 Comfortable standing platform, 480 x 655 mm Self-closing safety door Platform railings on three sides with handrail and knee bar Platform height up to 2370 mm Gradually adjustable outrigger Integrated tool storage tray Transport through castors Ø 150 mm Telescopic section can be fitted without tools Four-fold edged rung-to-side-rail connection Stable aluminium profile side-rails 07 Platform ladders Fig Simple transport through castors Ø 150 mm Protected all-round by stable railing and knee board Suitable for all ground surfaces thanks to gradually adjustable outrigger with quick-release lock 111

112 Platform ladders FlexxStep FlexxStep standard version Working height up to approx. m FlexxStep 4 rungs FlexxStep 5 rungs FlexxStep 6 rungs Telescopic attachment plus 2 rungs Telescopic attachment plus 3 rungs Platform height m max. plus 0.56 max. plus 0.82 Base spread m Width incl. outrigger m Number of rungs incl. standing platform Weight approx. kg * * Standard version FlexxStep, order no only in conjunction with plus 2 rungs in conjunction with plus 2 and 3 rungs in conjunction with plus 2 and 3 rungs * contains 2 pcs. * contains 2 pcs. 07 FlexxStep with telescopic attachment Platform ladders FlexxStep plus incl. telescopic attachment FlexxStep 4 rungs (52524) with telescopic attachment plus 2 rungs (52520) Platform height m FlexxStep 5 rungs (52525) with telescopic attachment plus 2 rungs (52520) Platform height m FlexxStep 5 rungs (52525) with telescopic attachment plus 3 rungs (52521) Platform height m FlexxStep 6 rungs (52526) with telescopic attachment plus 2 rungs (52520) Platform height m FlexxStep 6 rungs (52526) with telescopic attachment plus 3 rungs (52521) Platform height m Standard plus 1 rung plus 2 rungs plus 3 rungs Weight approx. kg FlexxStep with telescopic attachment, order no

113 Platform ladders - Platform ladders mobile, folding Platform ladder made of aluminium mobile, foldable Sturdy profile side-rails with a depth of 80 mm, grooved steps, permanently edged to the side-rails, spacious platform 650 x 600 mm made of grooved aluminium cover, handrail on both sides, platform railing on three sides. Safe standing ensured by non-slip nivello ladder shoes and stabiliser bar, with 2 lockable fixed castors 125 mm Ø, with a large tray on top. Ladder width 650 mm. 07 Fig Platform ladders Working height up to approx. m Platform height m Height including railing m Total length folded m Base spread m Cross-tube width m Number of steps incl. platform Weight approx. kg

114 Platform ladders - Platform ladders mobile, foldable Platform ladder made of aluminium, mobile, foldable, with small stabiliser bar Sturdy profile side-rails with a depth of 80 mm, grooved steps, permanently edged to the side-rails, spacious platform 650 x 600 mm made of grooved aluminium cover, handrail on both sides, platform railing on three sides. Safe standing ensured by non-slip nivello ladder shoes and small stabiliser bar with ballast weight, with 2 lockable fixed castors 125 mm Ø, with a large tray on top. Ladder width 650 mm. The small stabiliser bar is particularly suitable for narrow shelf aisles and for use in other tight spaces. Ballast weights ensure the required stability. Assembly instructions included. 07 Platform ladders Fig Fig. Ballast weight 80 kg Working height up to approx. m Platform height m Height including railing m Total length folded m Base spread m Cross-tube width m Number of steps incl. platform Ballast weight approx. kg Weight with ballast approx. kg

115 Platform ladders Single-sided platform ladder Single-sided platform ladder, made of aluminium, with spring-mounted castors Stable aluminium rectangular tube side-rails, steps with a depth of 200 mm, platform size 600 x 800 mm. Complete with railing on three sides with toe and knee board. 4 self-locking swivel castors Ø 125 mm, 2 with locking device. Shipment in disassembled parts, detailed assembly instructions included. In accordance with DIN EN 131-7, handrails on both sides are optional on the ascensions of platform ladders with an ascent angle greater or equal 60. See the Accessories and Spare Parts chapter for suitable accessories. Product video Platform ladder made of aluminium R 13 Corundum coating R 13 on request Fig with handrail order no Step and platform version: Grooved aluminium Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg Platform ladders Step and platform version: Wood Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg Step and platform version: Steel grating Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg

116 NEW! Platform ladders Single-sided platform ladder Single-sided platform ladder, made of aluminium, with casters and handle Stable aluminium rectangular tube side-rails, steps with a depth of 200 mm, platform size 600 x 800 mm. Complete with railing on three sides with toe and knee board. With two fixed casters Ø 125 mm and two pushing handles. Shipment in disassembled parts, detailed assembly instructions included. In accordance with DIN EN 131-7, handrails on both sides are optional on the ascensions of platform ladders with an ascent angle greater or equal 60. For matching accessories, please go to page Fig with handrail order no R 13 Corundum coating R 13 on request Product video Platform ladder made of aluminium Platform ladders Step and platform version: Grooved aluminium Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg Step and platform version: Wood Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg Step and platform version: Steel grating Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.09 Number of steps incl. platform Weight approx. kg

117 Platform ladders Double-sided platform ladder Double-sided platform ladder made of aluminium, with spring-mounted castors Stable aluminium rectangular tube side-rails, steps with a depth of 200 mm, platform size 600 x 800 mm. Complete with railing on both sides with toe and knee board. 4 self-locking swivel castors Ø 125 mm, 2 with locking device. Shipment in disassembled parts, detailed assembly instructions included. In accordance with DIN EN 131-7, handrails on both sides are optional on the ascensions of platform ladders with an ascent angle greater or equal 60. For matching accessories, please go to page R 13 Product video Platform ladder made of aluminium Corundum coating R 13 on request Fig with handrail order no Step and platform version: Grooved aluminium Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.90 Number of steps incl. platform Weight approx. kg Platform ladders Step and platform version: Wood Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.90 Number of steps incl. platform Weight approx. kg Step and platform version: steel grating Working height up to approx. m Platform height w/o handrail m Base area W x D m 0.77 x x x x x x 2.90 Number of steps incl. platform Weight approx. kg

118 Platform ladders Accessories Accessories: Handrail Suitable for aluminium platform ladders, with access on one side. Screwed to the ascent, optionally right or left, suitable for platform ladders incl. platform. Handrail Suitable for aluminium platform ladders, with access on both sides. Screwed to the ascent, optionally right or left, suitable for platform ladders incl. platform. For platform ladders, 3 steps For platform ladders, 3 steps For platform ladders, 4-6 steps For platform ladders, 4-6 steps For platform ladders, 7-8 steps For platform ladders, 7-8 steps Fig Fig NEW! Pluggable railing version Suitable for aluminium platform ladders, with access on one side to NEW! Pluggable railing version Suitable for aluminium platform ladders, with access on both sides to Sturdy aluminium design comprising 2 side railings and a closing railing incl. foot and knee bars. Easy to dismantle thanks to toolfree system. The pluggable railing version can only be inserted in combination with the handrail. Sturdy aluminium design comprising 2 side railings incl. foot and knee bars. Easy to dismantle thanks to toolfree system. The pluggable railing version can only be inserted in combination with the handrail. Platform ladders On one side Both sides NEW! Pluggable handrail Pluggable version, left side NEW! Pluggable handrail Pluggable version, right side Suitable for aluminium platform ladders to Suitable for aluminium platform ladders to Easy to dismantle thanks to toolfree system. Easy to dismantle thanks to toolfree system. The inserted handrail. version can only be inserted in combination with the inserted railing version. The inserted handrail. version can only be inserted in combination with the inserted railing version. For platform ladders, 3 steps For platform ladders, 3 steps For platform ladders, 4-6 steps For platform ladders, 4-6 steps For platform ladders, 7-8 steps For platform ladders, 7-8 steps Fig Fig

119 Platform ladders Accessories Safety barrier Improves safety on the platform and prevents falls during ascent. Selfclosing study.aluminium design with handle on both sides. Dimensions W x H 640 x 600 mm NEW! Safety rope Improves safety on the platform and prevents falls during ascent. Sturdy screw connection on the railing and very string rope. NEW! Tray Incl. holder and attachment NEW! Chassis With swivelling castors, Operation through central lever. NEW! 500 x 220 mm, clamping area Ø 35 mm x 310 mm, clamping area Ø 35 mm Pole Suitable for aluminium platform ladders, with access on one side. To attachment of the face-side railing. Fig NEW! Retrofit kit stainless steel For outdoor use, for self-installation. NEW! Platform ladders On one side Both sides Fig Retrofit kit for casters and pushing handles With the pushing handles and casters Ø 125 mm facilitate easy transportation of the aluminium platform ladders with access on one side to The retrofit kit is screwed on and thereby replaces the four series casters. NEW!

120 SMART TIPS! KEY FEATURES OF OUR STAIRS, BRIDGING STEPS AND WALKWAYS! Simple installation years quality guarantee standard products Delivery in pre-assembled component groups including assembly instructions Large stepping surfaces and bases Safe, comfortable, fatigue-free working even with tools and for longer periods of time 08 Stairs Bridging steps Walkways 45 / 60 / x Inclination angle For all sizes standard inclination angles 45 and 60 Surface materials Non-slip designs for safe standing Wide range of different materials to choose from suitable for every individual purpose Special inclination angles available upon request EXPRESS DELIVERY 10 Available for delivery within 10 working days. See page 227 for detailed information 120

121 STAIRS BRIDGING STEPS WALKWAYS Stairs with design approval, manufactured in accordance with European standard DIN EN ISO Industrial stairs made of aluminium With standard inclination angles of 45 and 60. Special inclination angles upon request. These stairs are manufactured according to DIN EN ISO Industrial aluminium stairs cannot be use for domestic purposes according to DIN Notes from the standard sections of DIN EN ISO 14122: Stairs with an inclination of 45 should be given preference for safety reasons. Only if required by the local conditions, stairs or stair ladders with an inclination of 60 should be chosen. We offer stair ladders for access to machines upon request. These may have an inclination between 45 and 75 and always have to be fitted with two handrails. Industrial stairs must be fitted with at least one handrail. Two handrails have to be fitted in case of stair widths of 1200 mm or more. The second handrail is offered for an extra charge. The standard scope includes one handrail. Handrails are always included separately. In case of an access height exceeding 500 mm and a side gap next to the stair stringer of more than 120 mm, a railing has to be fitted on this side of the stairs as a protection. In case of passages through a railing, an automatically closing one-way gate, consisting of handrail and knee guard is required at the same height as the railing. One-way gates must open towards working level and shut against a fixed stop. An intermediate platform is required for stairs (up to 45 ) and a vertical height of more than 4000 mm, for stair ladders (over 45 ) from a vertical height of more than 3000 mm. Permissible load: 1,5 kn/m 2. Higher loads upon request. In case of inclinations of 45 and a step width of 600 mm, a centre stabiliser is required from a vertical height of 3750 mm; this is required as from a vertical height of 3330 mm in case of a step width of 800 or 1000 mm. These central stabilisers could be a bracket or support frame; please note the delivery options at the end of the chapter. Stairs, bridging steps and walkway systems are manufactured to order. For this reason, they are non-returnable. Marking of our products according to non-slip classes Our products are marked with non-slip class certification Characteristic construction features Side-rails made of sturdy aluminium profiles; upper end with support brackets, lower end with plastic shoes; foot bracket upon request. Railings made of round tubes, Ø 40 mm, with screwed together fasteners; railing height 1100 mm. Railings in plug-in design are available with web members or covers at an extra charge. Non-slip step covers are screwed to the side-rails. Standard delivery with grooved aluminium step cover; deep grooved aluminium covers, perforated aluminium or steel sheet, aluminium grating, steel grating or corundum coating R 13 are also available at an extra charge. Delivery from the factory is in pre-assembled component groups, railings are always included separately, incl. assembly instructions and Manufacturer's Declaration. 08 Stairs Bridging steps Walkways R 9 R 11 R 13 R 13 Grooved aluminium Deeply grooved aluminium Perforated sheet made of aluminium Aluminium grating, anodised R 13 R 11 R 13 Perforated sheet made of steel steel grating Corundum coating R 13* * on request 121

122 Stairs, bridging steps and walkway systems Stairs 45 stairs made of aluminium Step width mm. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture special sizes upon request. Intermediate dimensions are available without extra charge. Handrail on both sides is optional (necessary in case of wall clearance > 120 mm acc. to DIN EN ISO ). Fig with 2nd handrail order no Stairs Bridging steps Walkways The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating 45 stairs made of aluminium Step width/ Step depth mm Number of steps Vertical height mm Base area mm / / / Second handrail at an extra charge

123 Stairs, bridging steps and walkway systems Stairs 60 stairs made of aluminium Step width mm. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture special sizes upon request. Intermediate dimensions are available without extra charge. Handrail on both sides is necessary acc. to DIN EN ISO Fig with 2. handrail order no The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 11 Deeply grooved aluminium R 13 Perforated sheet made of aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating 08 Stairs Bridging steps Walkways 60 stairs made of aluminium Width of the steps / depth of steps mm Number of steps Vertical height mm Base area mm / / / Second handrail at an extra charge

124 Stairs, bridging steps and walkway systems Stairs 45 stairs with platform made of aluminium Step width mm. Platform length 600 mm. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. If no support surface or attachments are provided by the customer, it is imperative that 2 brackets are used for fastening. Handrail on both sides is optional (necessary in case of wall clearance > 120 mm acc. to DIN EN ISO ). Extra charge for each bracket and railing at the front side (Page 133) Fig additionally with bracket order no and front-end railing order no Additionally special cover steel grating. 08 Stairs Bridging steps Walkways The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating 45 stairs made of aluminium with platform Width of the steps / depth of steps mm Number of steps Vertical height mm Base area mm / / / Second handrail at an extra charge

125 Stairs, bridging steps and walkway systems Stairs 60 stairs with platform made of aluminium Step width mm. Platform length 600 mm. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. If no support surface or attachments are provided by the customer, it is imperative that 2 brackets are used for fastening. Handrail on both sides is necessary acc. to DIN EN ISO Extra charge for each bracket and railing at the front side (Page 133) Stairs with platform, additionally with bracket and front-end railing. The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 11 Deeply grooved aluminium R 13 Perforated sheet made of aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating 08 Stairs Bridging steps Walkways 60 stairs made of aluminium with platform Width of the steps / depth of steps mm Number of steps Vertical height mm Base area mm / / / Second handrail at an extra charge

126 Stairs, bridging steps and walkway systems Platform stairs 45 platform stairs made of aluminium, mobile Step width mm. Platform length 600 mm. 2 swivel castors Ø 125 mm on ascending sector, chassis bar with 2 fixed wheels Ø 160 mm, on the supporting part, each with locking device (total stop). The standard scope of delivery with two-sided handrail and 3-sided platform railing. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. Fig Stairs Bridging steps Walkways The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating We will be happy to offer you central lever gears upon request. See also page 131. Symbol 45 platform stairs made of aluminium, mobile Width of the steps / depth of steps mm Number of steps Vertical height mm Base area mm Chassis width mm / / /

127 Stairs, bridging steps and walkway systems Platform stairs 60 platform stairs made of aluminium, mobile Step width mm. Platform length 600 mm. 2 swivel castors Ø 125 mm on ascending sector, chassis bar with 2 fixed wheels Ø 160 mm, on the supporting part, each with locking device (total stop). The standard scope of delivery with two-sided handrail and 3-sided platform railing. Stairs according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. Fig The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 11 Deeply grooved aluminium R 13 Perforated sheet made of aluminium R 13 Aluminium grating, anodised R 13 We will be happy to offer you central lever gears upon request. See also page 131. Perforated sheet made of steel R 11 steel grating 08 Stairs Bridging steps Walkways Symbol 60 platform stairs made of aluminium, mobile Width of the steps / depth of steps mm Number of steps Vertical height mm Base area mm Chassis width mm / / /

128 Stairs, bridging steps and walkway systems Bridging steps 45 bridging steps made of aluminium, stationary or mobile Step width mm. Platform length 800 mm. Lower side-rail ends with foot brackets for floor-mounted installation. Bridging steps according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. Handrail on both sides is optional (necessary in case of wall clearance > 120 mm acc. to DIN EN ISO ). For platform extensions and other accessories, see page 130. Fig with 2nd handrail order no Stairs Bridging steps Walkways The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel R 11 steel grating Option: Mobile bridging steps: Please indicate the option chassis on your order. Re-equipping bridging steps that were already delivered requires retrofitting at the factory. Carriage consisting of 2 yellow stabiliser bars with 2 castors each of 160 mm dia. with locking device. Width of stabiliser with 3 7 steps 1190 mm, with 8 11 steps 1570 mm. In the case of movable bridging steps, the stabiliser bars reduce the clear height by 200 mm bridging steps, stationary, made of aluminium Number of steps Width of the steps / Clear height H2 mm depth of steps mm Clear width L2 mm Base area mm / / / Second handrail at an extra charge

129 Stairs, bridging steps and walkway systems Bridging steps 60 bridging steps made of aluminium, stationary or mobile Step width mm. Platform length 800 mm. Lower side-rail ends with foot brackets for floor-mounted installation. Bridging steps according to technical description and standards as per general information given at the beginning of the chapter. We would be pleased to manufacture larger platforms and special sizes on request. Intermediate dimensions are available without extra charge. Handrail on both sides is necessary acc. to DIN EN ISO For platform extensions and other accessories, see page 130. Fig with 2nd handrail order no The standard version is made of grooved aluminium. Other covers at extra charge (see page 132). Non-slip classes R 9 Grooved aluminium R 11 Deeply grooved aluminium R 13 Perforated sheet made of aluminium R 13 Aluminium grating, anodised R 13 Perforated sheet made of steel Option: Mobile bridging steps: Please indicate the option chassis on your order. Re-equipping bridging steps that were already delivered requires retrofitting at the factory. Carriage consisting of 2 yellow stabiliser bars with 2 castors each of 160 mm dia. with locking device. Width of stabiliser with 3 7 steps 1190 mm, with 8 11 steps 1570 mm. In the case of movable bridging steps, the stabiliser bars reduce the clear height by 200 mm R 11 steel grating 08 Stairs Bridging steps Walkways 60 bridging steps, stationary, made of aluminium Width of the steps / depth of steps mm Number of steps Clear height H2 mm Clear width L2 mm Base area mm / / / Second handrail at an extra charge

130 Stairs, bridging steps and walkway systems Accessories Accessories: NEW! Platform extension Platform extension 200 mm (the platform is available with a spacing of 200 mm up to 2000 mm (L2), > 2000 mm upon request). Extra charge for step width. NEW! Railing extension 200 mm surcharge. 600 mm mm mm Fig Fig NEW! Safety barrier Safety barrier with knee rail for platform width 650 to 1050 mm. NEW! Safety rope Safety rope with karabiners and eye bolts for platform width 650 to 1050 mm. 650 mm mm mm mm mm mm Fig Fig NEW! Safety doors According to DIN EN ISO Safety doors for platform width 650 to 1050 mm. NEW! Tray Stairs Bridging steps Walkways Fig Fig NEW! 500 x 220 mm, clamping area Ø 40 mm x 300 mm, clamping area Ø 40 mm NEW! PFB 650 PFB 850 PFB 1050 PFL 1000 PFL 1200 PFL mm mm mm Hook Hook holder for plug-fitted railing Ø 40 mm. Plug-fitted railing Replacement set plug-fitted pocket aluminium For retrofitting rigid railings to plugfitted railings 1 set = 2 pcs. incl. attachment material Rigid / plug-fitting railing

131 Stairs, bridging steps and walkway systems Brake systems Brake systems ZBS swivel castors can be lifted and lowered with a lever, operating lever with locking bolts, optionally right or left, work lift 50 mm. Swivel castors can be selected from Ø 125 mm to Ø 200 mm. NEW! ZBS swivel castors can be lifted and lowered with a lever, operating lever with locking bolts, optionally right or left, work lift 50 mm. Swivel castors can be selected from Ø 125 mm to Ø 200 mm ZBS swivel castors can be operated with a foot lever located in the middle below the first step. Swivel castors can be selected from Ø 100 mm to Ø 200 mm ZBS swivel castors can be operated with a foot lever located in the middle below the first step. Swivel castors can be selected from Ø 100 mm to Ø 200 mm ZBS 3 2 or 4 swivel castors with hydraulic brake can be operated. Swivel castors can be selected Ø 160 mm or Ø 200 mm ZBS 4 2 swivel castors can be operated with a foot lever located on the right next to the first step. Swivel castors Ø 100 mm. Stairs Bridging steps Walkways ZBS 5 2 swivel castors can be operated with the foot lever located in-between. Swivel castors Ø 125 mm

132 Stairs, bridging steps and walkway systems Step surfaces Industrial stairs made of aluminium Standard version for stairs, stairs with platform, movable platform stairs and bridging steps are fitted with a step cover made of grooved aluminium. Other step covers are available at an extra charge. Extra step cover per step (compared with standard grooved aluminium step) R 11 Non-slip classes Only for steps / bridging steps with an inclination of 60. Deeply grooved aluminium Step width/ 600 mm Step width/ 800 mm Step width/ 1000 mm R 13 Aluminium grating, anodised Step width/ 600 mm Step width/ 800 mm Step width/ 1000 mm Stairs Bridging steps Walkways R 13 Only for steps / bridging steps with an inclination of 60. R 13 R 11 Perforated sheet made of aluminium Step width/ 600 mm Step width/ 800 mm Step width/ 1000 mm Perforated sheet made of steel Step width/ 600 mm Step width/ 800 mm Step width/ 1000 mm steel grating Step width/ 600 mm Step width/ 800 mm Step width/ 1000 mm Step replacement made easy! With our step replacement set you can replace the steps on all sets of steps that have an inclination of 45 or 60 yourself. This is possible with the materials grooved aluminium and deeply grooved aluminium. Step replacement set 45 step Step replacement set 60 step

133 Stairs, bridging steps and walkway systems Step surfaces accessories Overview of step covers Non-slip class Step depth mm Grooved aluminium R 9 X X Deeply grooved aluminium R 11 X Perforated sheet made of aluminium R 13 X Aluminium grating, anodised R 13 X Perforated sheet made of steel R 13 X X steel grating R 11 X X Accessories Aluminium triangular bracket suitable for step width Aluminium triangular bracket suitable for step width Aluminium triangular bracket suitable for step width Step width/ 600 mm mm mm Aluminium support frame for 45 stairs Aluminium support frame for 60 stairs Aluminium support frame for 90 under the platform Front-side railing suitable for step width Front-side railing suitable for step width mm mm Stairs Bridging steps Walkways Front-side railing suitable for step width 1000 mm Foot bracket for floor-mounted installation 1 set = 2 pcs Tray for railing W x H x D mm 600 x 100 x 300 from 800 mm

134 Stairs, bridging steps and walkway systems Platform surfaces Platform stairs made of aluminium, single-sided, stationary With design approval, corresponds to DIN EN ISO Ascents consisting of leaning ladders with edged steps. Platform made of grooved aluminium profile, platform length 800 mm, platform width 650 mm, three-sided platform railing 1100 mm with toe and knee boards as well as standard handrails on both sides. Stabiliser bars and foot brackets for safe floor-mounted installation. Permissible total load 150 kg. Step depth 80 mm, inclination 70, outside width 650 mm. Shipment in disassembled parts detailed assembly instructions included. Fig Number of steps Vertical height m Base area m Width of stabiliser bar m Weight approx. kg Stairs Bridging steps Walkways Platform stairs made of aluminium, single-sided, mobile GS-tested, according to the European standard DIN EN (replaces BGI 637). Ascents consisting of leaning ladders with edged steps. Platform made of grooved aluminium profile, platform length 800 mm, platform width 650 mm, three-sided platform railing 1100 mm with toe and knee boards as well as standard handrails on both sides. Clear height 300 mm, 2 stabiliser bars for high stability, with 2 castors Ø 100 mm allowing convenient movement to flexible locations. Permissible total load 150 kg. Step depth 80 mm, inclination 70, outside width 650 mm. Shipment in component groups for easy assembly, instructions included. Fig Number of steps Vertical height m Base area m Width of stabiliser bar m Weight approx. kg

135 Stairs, bridging steps and walkway systems Bridging Bridge made of aluminium, double-sided, stationary With design approval, corresponds to DIN EN ISO Ascents consisting of leaning ladders with edged steps. Platform made of grooved aluminium profile, platform length 800 mm, platform width 650 mm, railing on both sides 1100 mm with toe and knee boards as well as standard handrails on both sides. Stabiliser bars and foot brackets for safe floor-mounted installation. Permissible total load 150 kg. Step depth 80 mm, inclination 70, outside width 650 mm. Shipment in disassembled parts detailed assembly instructions included. Fig Number of steps Vertical height m Base area m Width of stabiliser bar m Weight approx. kg Accessories: Tray Incl. holder and attachment NEW! Safety rope Safety rope with karabiners and eye bolts for platform width 600 mm. NEW! 08 Stairs Bridging steps Walkways 500 x 220 mm, clamping area Ø 35 mm Fig Fig

136 Stairs, bridging steps and walkway systems Walkway systems Walkway systems Design in accordance with DIN EN ISO Walkway systems in modular construction Platform cover of the walkway modules in standard version, grooved aluminium (Non-slip class 9) or steel grating (Non-slip class 11). 08 R 9 R 11 Stairs Bridging steps Walkways Grooved aluminium steel grating For a wide range of indoor applications in production, in the warehouse, as access to machines, as a walkway along building walls and many more. Thanks to innovative modular construction, walkway systems can be arranged conveniently, cost-effectively yet precisely meeting your requirements. You can specify the platform height of the walkway system between 1.25 up to 3.00 metres individually. The desired total length is achieved by way of combining 3 different walkway lengths. The modules can be easily assembled and safely interconnected thanks to pre-assembled component groups and fastened to the ground using foot brackets. The modules are manufactured as stable, corrosion resistant aluminium construction with support frame. Access to the walkway conveniently via a 45 stairway with handrails and automatically closing safety door. Railings on both sides of the walkway provide for high level of working safety. The walkway modules are maintenance-free and durable. Delivery is made in easy-to-assemble component groups. Detailed assembly instructions are included. Note: You can only combine modules of the same platform height when making up a walkway. Please contact us if you need different platform heights on a walkway system. The walkway systems are suitable for interior applications. Please contact us for outdoor applications, we will be glad to furnish you with our individual quotation. 136

137 Stairs, bridging steps and walkway systems Walkway systems Walkway systems in modular construction Walkway modules A walkway module consists of 1 platform, 1 support section and 2 rigid railings. Platform cover made of non-slip, grooved aluminium or steel grating. Rigid railings with toe and knee boards on both sides. Height 1100 mm. Stationary fastening by means of foot brackets. Permissible load 150 kg / m², load 300 kg. Please indicate the exact height needed from the factory (upper edge of the platform) when ordering. The walkway modules are delivered custom-fit in height according to your requirement. Please compile the desired walkway length from the following, given walkway lengths and combine the complete walkway with the suitable stair module. Walkway modules: Grooved aluminium cover Platform height mm Platform length mm Platform width mm Platform width incl. railing mm Platform height mm Platform length mm Platform width mm Platform width incl. railing mm Walkway modules: Steel grating cover Platform height mm Platform length mm Platform width mm Platform width incl. railing mm Stairs Bridging steps Walkways Platform height mm Platform length mm Platform width mm Platform width incl. railing mm

138 Walkway systems in modular construction Modular construction system Stairs, bridging steps and walkway systems Walkway systems Besides the walkway modules, you can also make up your walkway for your specific requirements and conditions individually from our modular construction system. A complete walkway system comprises at least: = 1 Platform 1 Support section 2 Railings 1 Platform stairway Walkway system Choose from the following options: Platform Non-slip class* R 9 * Platform cover Platform length mm Platform width mm Grooved aluminium Grooved aluminium Stairs Bridging steps Walkways R 11* R 13 * Grooved aluminium steel grating steel grating steel grating Aluminium grating, anodised Aluminium grating, anodised Aluminium grating, anodised R 13 * Perforated sheet made of steel Perforated sheet made of steel Perforated sheet made of steel R 11 * Wooden platform board Wooden platform board Wooden platform board

139 Stairs, bridging steps and walkway systems Walkway systems Walkway systems in modular construction Modular construction system Support section 1 support section is needed for each platform. Platform height mm Platform width mm Railing, rigid Please note that you need 2 railings for each platform. Platform length mm Railing height mm 1260 / / / Stairs Bridging steps Walkways Railing, plug-fitted type Railing fastening using railing plug-in pockets and securing bolts with safety rope. Removable easily and without tools. Platform length mm Railing height mm 1260 / / /

140 Walkway systems in modular construction Stairs, bridging steps and walkway systems Walkway systems Stairway modules A stairway module consists of 1 stairway, 1 platform, 1 front-side railing and 1 safety door. Step and platform cover made of non-slip, grooved aluminium. Inclination 45 Step width 800 mm Step depth 240 mm Platform length 690 mm Platform width 850 mm Stairway including automatically closing safety door and railing for the platform front side. Rigid handrails and railings with toe and knee boards on both sides. Height 1100 mm. Stationary fastening by means of foot brackets. Permissible load 150 kg/m², load 300 kg. Please indicate the exact height needed from the factory (upper edge of the platform) when ordering. The stairway modules are delivered custom-fit in height according to your requirement. We gladly deliver intermediate sizes at the price of the next higher number of steps. Other stairway inclinations on request. Stairway modules: Grooved aluminium cover 08 Stairs Bridging steps Walkways Number of steps Top edge of platform (vertical height) mm up to Base area mm A support frame order no is recommended from 10 steps onwards Stairway modules: Alternative step and platform covers Alternatively, we offer further step and platform covers for the stairway modules. The extra charge is calculated against the standard grooved aluminium step cover. Step and platform cover Deeply grooved aluminium R Aluminium grating, anodised R Perforated sheet made of aluminium R Perforated sheet made of steel R Steel grating R

141 Stairs, bridging steps and walkway systems Walkway systems System railing For universal use Simple installation Stable construction Attractive design We offer connecting elements and tubes with an outside Ø of 40 mm for system railings, with which all variants of construction can be fitted. Surface treatment e.g. powder coating can be carried out in all standard RAL colours on request. Overview of connectors Designation Designation Designation Designation Designation Order no. Tube connector T-piece Tube connector cross piece Tube connector corner piece Tube connector joint 0-90 (2 pcs. required) Tube connector railing connector Designation Tube connector joint 0-90 (+1 pc. order no required) Designation Railing pocket Designation Railing filler Designation Safety pin 58 mm Designation Order no. Wall bracket Stairs Bridging steps Walkways Designation Designation Designation Designation Designation Order no. Ground bracket Railing joint piece Corner joint 90 head unit Corner joint 90 open End cap 108 x Designation End plug ø 40 x Designation T-slot screw M8 x 18 cpl Designation T-slot screw M8 x 55 cpl Designation Toe board 108x25x Toe board 108x25x Order Designation no. Round aluminium tube ø 40x3x Round aluminium tube ø 40x3x

142 Walkway systems in modular construction Stairs, bridging steps and walkway systems Walkway systems Fig. Stairway order no with walkway module order no , walkway module order no and walkway module order no Stairs Bridging steps Walkways 142

143 Stairs, bridging steps and walkway systems Walkway systems Walkway systems in modular construction Step and platform cover grooved aluminium 08 Stairs Bridging steps Walkways Fig. Stairway order no with walkway module order no and walkway module order no

144 SMART TIPS! KEY FEATURES OF OUR MANHOLE AND SHAFT SYSTEMS! Shaft ladders in two widths years quality guarantee standard products Use of fall stop rail with wide version possible Fields of application are sewage plants, landfills, retention basins, pump shafts etc. Shaft ladders made of steel, stainless steel, reinforced fibre glass Suitable material depending on the purpose Access aids Various options for safe entry and exit 09 Manhole and shaft systems Among other things, DIN and DGUV require: manhole ladders must have a holding device fitted at their exit that ensures safe access and exit e.g. grab bars or handles. Accessories for shaft ladders Various variants Rigid or movable Different material designs EXPRESS DELIVERY 1-3 Available for delivery within 1-3 working days. See page 227 for detailed information 144

145 MANHOLE AND SHAFT SYSTEMS With design approval; access aids corresponding to DIN 19572; shaft ladders in conformity with the Construction Product Directive (BauPVO) 305/2011 (EU) and the European Standard DIN EN (you will find the declaration of performance on our website). Access aid (grab bar) Made of stainless steel V4A (1.4571), pickled and passivated, especially good value for money thanks to mobile use, only the sleeve remains fixed in the shaft. Length approx. m 1.60 Weight approx. kg Socket Made of stainless steep V4A (1.4571), pickled and passivated (round) or galvanised steel (rectangular), suitable for the above access aid. Material Stainless steel V4A (1.4571) Galv. st. Weight approx. kg Access aid (grab bar) complete with sleeve Made of stainless steep V4A (1.4571), pickled and passivated, or galvanised steel, can be lowered, for attachment to the wall. Length approx. m Material Stainless steel V4A (1.4571) Galv. st. Weight approx. kg Access aid (grab bar) complete with sleeve Made of stainless steep V4A (1.4571), pickled and passivated, or galvanised steel, can be lowered, for attachment to the ladder side-rails from 50 x 20 to 60 x 25 mm (not for shaft ladders made of reinforced fibre glass). Length approx. m Material Stainless steel V4A (1.4571) Galv. st. Weight approx. kg Access aid, double side-rails Made of stainless steel V4A (1.4571), pickled and passivated, or galvanised steel, can be lowered, complete with fittings for ladder side-rail 50 x 20 mm, for ladder widths 340 and 440 mm. 09 Manhole and shaft systems Working length approx. m for ladder width mm Length access aid mm Material Galv. st. Stainless steel V4A (1.4571) Galv. st. Stainless steel V4A (1.4571) Weight approx. kg Accessories: We recommend express anchors for the attachment of sockets to the shaft wall (approved by the building authorities), minimum concrete thickness 220 mm Fig

146 Steel shaft ladder, hot-galvanised Shaft equipment Shaft ladder Clear width 300 mm / 400 mm. Rectangular tube side-rails 50 x 20 mm, non-slip perforated rungs. Fig Number of rungs Ladder length approx. m Outside width mm Clear width mm Outside width mm Clear width mm Shaft ladders made of stainless steel V4A (1.4571), pickled and passivated Clear width 300 mm / 400 mm. Rectangular tube side-rails 50 x 20 mm, non-slip perforated rungs. Number of rungs Ladder length approx. m Outside width mm Clear width mm Outside width mm Clear width mm Manhole and shaft systems Fig Shaft ladder made of reinforced fibre glass Clear width 300 mm / 400 mm. Rectangular side-rails 58 x 25 mm, grooved rungs. Fig Number of rungs Ladder length approx. m Outside width mm Clear width mm Outside width mm Clear width mm Wall brackets are not included in the scope of delivery.

147 Shaft equipment Accessories shaft ladder Accessories for shaft ladders Rigid wall bracket 150 mm, galvanised steel Adjustable wall bracket mm, galvanised steel Adjustable wall bracket mm, galvanised steel Adjustable wall bracket mm, galvanised steel Fig , 62018, Adjustable wall bracket mm, galvanised steel Adjustable wall bracket mm, galvanised steel Rigid wall bracket 150 mm, stainless steel V4A (1.4571) Adjustable wall bracket mm, stainless steel V4A (1.4571) Fig , 62019, Adjustable wall bracket mm, stainless steel V4A (1.4571) Adjustable wall bracket mm, stainless steel V4A (1.4571) Adjustable wall bracket mm, stainless steel V4A (1.4571) Adjustable wall bracket mm, stainless steel V4A (1.4571) Foot plate stainless steel V4A (1.4571) Ladder connections for extension, stainless steel V4A (1.4571) Fig , 62021, Rigid wall bracket 150 mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Adjustable wall anchor mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Adjustable wall anchor mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Adjustable wall anchor mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Adjustable wall anchor mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Adjustable wall anchor mm, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass Ladder connections for extension, stainless steel V4A (1.4571), for ladders made of reinforced fibre glass For attachment to the shaft, dowels and bolts may be used instead of nuts and screw bolts only if their suitability has been substantiated for the location of use. They have to be selected according to the force acting on the ladder anchoring point as stated by the manufacturer. Note: Ladders with 4 9 rungs require 2 sets (=4 pcs.) of wall anchors, ladders with rungs require 3 sets (= 6 pcs.) of wall anchors, ladders with rungs require 5 sets (=10 pcs.) of wall anchors. 1 set = 2 pieces (1x right, 1x left). Dowels and screws for attachment to the wall are not part of the scope of delivery. Please contact well-known dowel suppliers for information Fig , 62022, Fig , 62023, Fig , 62024, Manhole and shaft systems Stirrup iron For single-rung manhole ladders. Stirrup iron with seamless coating made of high-density polypropylene. Tested according to DIN and DIN V 1264 and DIN EN Suitable for retrofitting. Prices on request. 147

148 SMART TIPS! KEY FEATURES OF OUR SINGLE-RAIL LADDERS! years quality guarantee standard products Single-rail ladders made of steel, stainless steel, aluminium with fall stop rail Suitable material depending on the purpose Lateral side-slip protection on the rung Additional safety Accessories Access aid, lockable door, rest platform 10 Single-rail ladders Single-rail ladders with foldable rungs Optically unobtrusive Functional Nicely designed EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 148

149 SINGLE-RAIL LADDERS With design approval, corresponding to DIN Part 2 and European Standard DIN EN 353-1, German Social Accident Insurance (DGUV) information sheet (formerly BGI/GUV-I 5189) and applicable accident prevention regulations. Single-rail ladder Fall stop rail welded to the rungs. All single-rail ladders complete with connection straps. Side-slip protection made of plastic on steel ladders, bevelled stainless steel side-slip protection on stainless steel ladders, laterally screwed down side-slip protection made of aluminium on aluminium ladders. Ladder width 370 mm. Material Length m Galvanised steel Stainless steel V4A (1.4571) Aluminium Wall bracket rigid Spacing to wall 150 mm, bore spacing 250 mm, borehole diameter 16 mm. Material Galvanised steel Stainless steel V4A (1.4571) Wall bracket adjustable Adjustable mm, bore spacing 254 mm, borehole diameter 16 mm. Larger adjustment ranges on request. Material Galvanised steel Stainless steel V4A (1.4571) Note the instruction manual during mounting. We recommend fitting a wall bracket every 1.12 m; the max. space between the wall brackets must not exceed 1.40 m. 10 Single-rail ladders Wall bracket aluminium For attaching single-rail ladders to round poles, pole spacing 155 mm, attachment boreholes 18 x 65 mm. Identification plate For fall protection equipment. Material Aluminium

150 Single stile ladders Single stile ladders All the stainless steel parts are pickled and passivated. Foldable rest platform Compulsory for ascent heights over 10 m, installation on every rung possible. Attachment directly on the central fall stop rail. Material Galvanised steel Stainless steel V4A (1.4571) Access aid Plug-on type, rotatable with handles and turn lock. Material Galvanised steel Stainless steel V4A (1.4571) Rail slip-on device For access aid, to be screwed to the top part of the ladder. Material Stainless steel V4A (1.4571) Aluminium Access protection unit made of aluminium The access protection unit is simply hung into a rung and secured by means of a padlock provided by the customer. Thus the single-rail ladder cannot be ascended by unauthorised persons. Single-rail ladders Material Aluminium Safety strap runner For all GÜNZBURGER STEIGTECHNIK fall protection systems. Robust design with snap hook. Smoothly sliding and good handling thanks to rounded, ergonomic shape. All test requirements according to DIN EN are fulfilled. Made of stainless steel V4A (1.4571), polyamide and aluminium. Max. rated load 150 kg, min. rated load 50 kg. Safety belt DIN EN

151 Single-rail ladders Single-rail ladders with foldable rungs Single-rail ladders with foldable rungs These maintenance ladders are used where ladders should not be optically obtrusive and blend in harmoniously with the building. The outside width of approx. 468 mm with the rungs folded down means the single-rail ladder can be installed in almost any corner or niche. The unobtrusive design makes the ladder suitable for indoor use, too. The basic body is made of aluminium, a fall stop rail is integrated as standard. See the previous page for safety strap runner and safety belt. Rungs with lateral side-slip protection, anodised E6 / EV1 as standard. A fold-down mechanism has to be fitted after a maximum of 5.0 m ladder length. The mechanism used to fold/unfold the rungs can be operated from above or below. The operating lever with its ball-and-socket system is of the plug-on type. When the operating lever has been removed, the ladder is also protected against unauthorised use. The single-rail ladder with foldable rungs can also be used as an emergency ladder up to a ladder length of 5.0 m. The single-rail ladder can be powder-coated individually according to the RAL colour scale or anodised. Technical data: Width with rungs folded down 468 mm Width with rungs folded up 160 mm Spacing to wall 150 mm Wall spacer brackets required every 1400 mm Connecting parts stainless steel V4A (1.4571) Installation length depends on the constructional circumstances. Prices on request. 10 Single-rail ladders Rungs folded down. Rungs folded up. 151

152 SMART TIPS! KEY FEATURES OF OUR FALL PROTECTION! Fall stop rail made of steel, stainless steel, aluminium Suitable material depending on the purpose years quality guarantee standard products Rail fastener for Ladder side-rail Rungs Stirrup iron Safety strap runner Tested and certified safety during ascent and descent Existing and additional CE test points and voluntary tests passed Tested with 150 kg steel weight Slides smoothly Easy to handle thanks to ergonomic shape 11 Inexperienced persons: Length of ladder Experienced person: Length of ladder Fall protection Stationary ladders on buildings DIN :2009 Ladder length max. 50 m Max. distance between rest platforms 10 m Max. distance between rest platforms 25 m not mandatory if the ladder is 50 m long and there is a rest platform at the upper end. Machine accesses DIN EN ISO : 2016 Max. distances between rest platforms 12 m EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 152

153 FALL PROTECTION According to European Directive 89/686/EEC and European Standard DIN EN 353-1, DGUV regulation (formerly BGR/ GUV-R198), DGUV information sheet (formerly BGI 691) and applicable accident prevention regulations. Fall stop rail with connection strap Length Order m no Galvanised steel Stainless steel V4A (1.4571) Aluminium Rail fastener for rungs (not shown) For the attachment of fall stop rails to ladders. Attachment of the fall stop rail to the ladder rungs at a distance of 1.68 m, but at least 4 attachment products with smaller ladder lengths. Galvanised steel Stainless steel V4A (1.4571) Rail push-on device For access aid, to be screwed to the top rail. Stainless steel V4A (1.4571) Rail stop, fixed (not shown) Stainless steel V4A (1.4571) Rail stop, detachable (not shown) Stainless steel V4A (1.4571) Rail point For exit at the side. Only for single-rail ladders. Rail fastener for stirrup irons For rung spacing 280 mm. Galvanised steel Stainless steel V4A (1.4571) Rail fastener for ladder side-rail For fastening at the side. For side-rail size up to 50 x 20 mm Galvanised steel Stainless steel V4A (1.4571) For side-rail size up to 60 x 25 mm Galvanised steel Stainless steel V4A (1.4571) Access aid Plug-on type, rotatable with handles and turn lock. Length Order m no. Galvanised steel Stainless steel V4A (1.4571) Stainless steel V4A (1.4571) Safety strap runner For all GÜNZBURGER STEIGTECHNIK fall protection systems. Robust design with snap hook. Smoothly sliding and good handling thanks to rounded, ergonomic shape. All test requirements according to DIN EN are fulfilled. Made of stainless steel V4A (1.4571), polyamide and aluminium. Max. rated load 150 kg, min. rated load 50 kg Safety belt DIN EN Foldable rest platform Can be fitted to each rung. Attachment directly on the central fall stop rail. 11 Fall protection ID plate For fall stop equipment Galvanised steel Stainless steel V4A (1.4571) RRP excl. VAT in CHF ,

154 SMART TIPS! KEY FEATURES OF OUR VERTICAL LADDERS! years quality guarantee standard products Vertical ladders made of steel, stainless steel, aluminium, anodised aluminium Various materials can be chosen depending on the purpose Rational modular principle Easy and fast installation Accessories Platforms, exits, access ladders, lockable doors, wall brackets etc. Practical planning aids Available for download from 12 Vertical ladders EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days. See page 227 for detailed information 154

155 VERTICAL LADDERS With design approval, according to European Standard DIN EN ISO or DIN or DIN , Workplace Regulations ASR A 1.8, German Social Accident Insurance (DGUV) information sheet (formerly BGI/GUV-I-5189) and applicable accident prevention regulations. Vertical ladders are always your suitable ascending solution whenever buildings, plants or machinery require permanent access. Vertical ladders are robust, durable, efficient and allow safe ascent and descent, even at large heights. Comfortable platforms allow breaks for a rest and simply changeover where vertical ladders are installed offset. A comprehensive range of accessories covers a wide range of different requirements which construction conditions may require. The optimised mounting system from GÜNZBURGER STEIGTECHNIK now enables time saving of up to 30 percent even in the case of complex systems with multi-section types. A new and highly stable attachment technique for the important back protection hoop is the modern response to increasing requirements with respect to economy. We plan vertical ladders in close coordination with the client, depending on location and purpose of use. After all, good planning is half the solution. 12 Vertical ladders 155

156 Vertical ladders Vertical ladders Depending on condition and purpose, different standards are applicable for the construction of vertical ladders. The vertical ladders of GÜNZBURGER STEIGTECHNIK meet these standards: DIN : Stationary vertical ladders on buildings Range of application: on buildings for maintenance and cleaning work. There are specific regulations on chimneys, please send us your enquiry. DIN : Emergency ladder systems Range of application: Emergency ladder systems are building constructions with which people can be rescued in emergency situations. As a matter of principle, selfrescue should be possible. DIN EN ISO : Stationary vertical ladders on machinery Range of application: As access to stationary and mobile machines and machinery plants. This may also include a building as part of a piece of machinery. 12 Vertical ladders Vertical ladders are available from us in various materials suitable to the purpose of use: Material Rungs Ladder width Transparent anodised aluminium Depth of side-rails 30 x 30 mm grooved 520 mm 60 mm Characteristic features Robust and attractive appearance Range of application Architecture and all demanding applications Bright aluminium 30 x 30 mm grooved 520 mm 60 mm Economic, light, universal All indoor areas and conditionally suitable for outdoor use Galvanised steel 30 mm perforated rungs 520 mm 60 mm Very robust and durable Industry and building constructions Stainless steel 30 mm perforated rungs 520 mm 60 mm Long-life and durable Hygienic, chemical, foodstuff sectors; industry and architecture 156

157 Vertical ladders Stationary vertical ladders on buildings DIN : Stationary vertical ladders on buildings Single- and multiple-flight vertical ladders with back protection Practical planning aid can be downloaded from: /planungshilfen 12 Range of application On buildings for maintenance and cleaning work. There are specific regulations on chimneys pertaining to attachment and back protection please send us your enquiry. Vertical ladders Planning and use The height of the individual ladder sections as well as spacing of the rest platforms is defined under consideration of certain groups of persons (1 or 2) with regard to the experience in using vertical ladders. 1) Persons with experience in using vertical ladders (e.g. antenna builders); to DIN person subgroup C 2) Persons without experience in using vertical ladders (e.g. private individuals); to DIN person subgroup A+B 157

158 Vertical ladders Stationary vertical ladders on buildings * * Distance to the edge of the roof Please note: As from a drop height of 5.0 m, a back protection has to be fitted, building construction permitting. As from a drop height of 10.0 m, the vertical ladder has to be offset. The maximum length of a ladder section must not exceed 10.0 m. Exception: If for structural reasons an offset should not be possible, the ladder can be continued beyond 10.0 m as a single-flight type. In this case, the transfer platform has to be replace by a hinged rest platform (order no / / / 68960). For lateral bridging steps, the ladder sections must run at a higher level. At unsecured exits, railings are recommended to be fitted to both sides of the vertical ladder, see DIN EN ISO (exit railing, order no ). If the gap at the exit is larger than 75 mm, exit step, order no ff must be ordered as well. A safety door, order no , is recommended for the exit. 12 Vertical ladders 158

159 Vertical ladders Stationary vertical ladders on buildings DIN : Stationary vertical ladders on buildings Single- and multiple-flight vertical ladders with back protection Single-flight vertical ladder with back protection (up to a maximum head 10.0 m) Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Order no. Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Vertical ladder connector * * * * * Delivery scope for ascent height below 5.0 m without back protection Multiple-flight vertical ladder with back protection (as from 10.0 m ascent height) For person group 1 = The maximum height of the individual ladder sections is 10.0 m. Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Back protection hoop offset construction Transfer platform Vertical ladder connector For person group 2 = The maximum height of the individual ladder sections is 6.0 m. Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Back protection hoop offset construction Transfer platform Vertical ladder connector 12 Vertical ladders 159

160 DIN : Emergency ladder systems Single- and multiple-flight vertical ladders with back protection Vertical ladders Emergency ladder systems Practical planning aid can be downloaded from: /planungshilfen 12 Vertical ladders Range of application Emergency ladder systems are building structures that, in the event of danger, allow capable persons to rescue themselves or allow other persons to be rescued. Comments about the terms Emergency ladder systems allow persons to rescue themselves, but also allow other persons to be rescued (e.g. by the fire service) They are no substitute for a second building-related rescue route within the meaning of the building laws. Within the meaning of DIN , persons who can rescue themselves are persons who are physically and mentally able to use an emergency ladder system independently in compliance with this standard, Planning and use When planning emergency ladder systems, the competent fire control authority has to be involved. In case of potential drop heights of more than 1.0 m, holding devices have to be fitted on exits, entries and bridges. Please note As from a drop height of 10.0 m, the vertical ladder has to be offset. In these cases, the maximum height of a ladder section must not exceed 6.0 m. If the distance between the vertical ladder and the railing is greater than 120 mm, the railing must be permanently attached to the vertical ladder near the handrails and the knee rails (new requirements from the new DIN :2017) (use of > extension spacer; order no ; page 173). For lateral bridging steps, the ladder sections must run at a higher level. At unsecured exits, railings are recommended to be fitted to both sides of the vertical ladder, see DIN EN ISO (exit railing, order no ). If the gap at the exit is larger than 75 mm, exit step, order no ff must be ordered as well. 160

161 Vertical ladders Emergency ladder systems DIN : Emergency ladder systems Single- and multiple-flight vertical ladders with back protection * * Distance to the edge of the roof Single-flight vertical ladder with back protection (up to a maximum head 10.0 m) Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Vertical ladder connector Multiple-flight vertical ladder with back protection (as from 10.0 m ascent height) The maximum height of the individual ladder sections is 6.0 m. Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Back protection hoop offset construction Transfer platform Vertical ladder connector Vertical ladders 161

162 DIN EN ISO : Stationary vertical ladders on machinery Single- and multiple-flight vertical ladders with back protection Vertical ladders Stationary vertical ladders on machinery Practical planning aid can be downloaded from: /planungshilfen 12 Vertical ladders Range of application Access to plants and machinery. Planning and use Vertical ladders on machinery permit access for maintenance and servicing work as well as for repairs and cleaning. This may also include a building as part of a piece of machinery. Please note: As from a drop height of 3.0 m, a back protection has to be fitted. As from a drop height of 10.0 m, the vertical ladder has to be offset. The maximum length of a ladder section must not exceed 6.0 m. If for structural reasons an offset is not possible, please contact us, we will be pleased to advise you. For lateral bridging steps, the ladder sections must run at a higher level. At unsecured exits, railings are required to be fitted to both sides of the vertical ladder, see DIN EN ISO (exit railing, order no ). If the gap at the exit is larger than 75 mm, exit step, order no ff must be ordered as well. A safety door, order no , is required for the exit. 162

163 Vertical ladders Stationary vertical ladders on machinery DIN EN ISO : Stationary vertical ladders on machinery Single- and multiple-flight vertical ladders with back protection * * Distance to the edge of the roof Single-flight vertical ladder with back protection (up to a maximum head 10.0 m) Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Vertical ladder connector Multiple-flight vertical ladder with back protection (as from 10.0 m ascent height) The maximum height of the individual ladder sections is 6.0 m. Ascent height up to (m) Ladder length (m) incl. exit side-rail Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 1.96 m Ladder section 2.80 m Ladder section 3.64 m Exit side-rail Wall bracket rigid, spacing to wall 200 mm Back protection hoop, Ø 700 mm Back protection hoop strut 3000 mm Back protection hoop offset construction Transfer platform Vertical ladder connector Safety strut Vertical ladders 163

164 Vertical ladders Modular kit system Vertical ladders: Modular construction system Ladder elements Ladder section 1.96 m 7 rungs Ladder width 520 mm, rung spacing 280 mm, side-rail dimensions 60 x 25 mm, rung dimensions 30 x 30 mm, rung version: grooved rungs with anodised aluminium and bright aluminium, perforated rungs with galvanised steel and stainless steel. Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 2.80 m 10 rungs Ladder width 520 mm, rung spacing 280 mm, side-rail dimensions 60 x 25 mm, rung dimensions 30 x 30 mm, rung version: grooved rungs with anodised aluminium and bright aluminium, perforated rungs with galvanised steel and stainless steel. Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Ladder section 3.64 m 13 rungs Ladder width 520 mm, rung spacing 280 mm, side-rail dimensions 60 x 25 mm, rung dimensions 30 x 30 mm, rung version: grooved rungs with anodised aluminium and bright aluminium, perforated rungs with galvanised steel and stainless steel. Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Vertical ladder connector 200 mm Vertical ladder connector on the inside for connecting the vertical ladders. Material Cast aluminium Stainless steel Connecting brace mm long, made of stainless steel, to reinforce ladder sections if, contrary to the standard, the spacing of the wall brackets is larger than 2.0 m for construction reasons. 2 pieces are required per ladder. Vertical ladders NEW! Material Stainless steel Circlip 2 clips for mounting the back protection when using the connecting units. Material Galvanised steel

165 Vertical ladders Modular kit system Wall brackets, U-shaped construction Rigid wall bracket Galvanised steel Ø 13 Ø 13 Wall clearance 150 mm Adjustable wall brackets Galvanised steel Wall clearance adjustment range mm Wall clearance 200 mm mm Fig Fig Wall brackets, single version & foot plates Dimension between axes Ø 16x26 Adjustable wall brackets Wall clearance adjustment range mm Galvanised steel Dimension between axes Ø 16x26 Rigid wall brackets Wall clearance 200 mm Galvanised steel Stainless steel Stainless steel Fig Fig Dimension between axes Ø 16x26 Adjustable wall brackets Wall clearance adjustment range mm Galvanised steel Dimension between axes Ø 16 Adjustable wall brackets Wall clearance adjustment range mm Galvanised steel Stainless steel; axle dimensions 650, 65 mm Stainless steel; axle dimensions 435, 100 mm Fig Fig Dimension between axes 410 Wall clearance 500 Fig Ø 16 Rigid wall bracket Wall clearance 500 mm 1 set comprising 1x right, 1x left Wall clearance 800 mm on request Galvanised steel Fig Material Dimension between axes Ø 16 Wall clearance mm Special wall brackets* Wall clearance see table. 1 set comprising 1x right, 1x left * Longer delivery times thanks to order-related production. Weight kg Galvanised steel Vertical ladders Stainless steel

166 Vertical ladders Modular kit system Wall brackets for use on insulating facades, pre-set facades etc Dimension between axes Ø 16x26 Adjustable wall brackets with clamping bracket Wall clearance adjustment range mm Galvanised steel Dimension between axes Wall br. full facade thermal insulation Wall clearance adjustment range mm Ø 16 Stainless steel; axle dimensions 650, 65 mm Galvanised steel Fig Dimension between axes Ø 16 Adjustable wall brackets with clamping bracket Wall clearance adjustment range mm Galvanised steel Foot plate 120 x 120 mm, for attaching the vertical ladders to the ground. Bore hole Ø 13 mm Galvanised steel Stainless steel; axle dimensions 435, 100 mm Stainless steel Fig Fig NEW! C-connector For screwing the back protection on 1 set = 5 pcs. Galvanised steel Vertical ladders Mounting and attachment The mounting sets for the respective vertical ladder modules are included in the scope of delivery. Attachment: The standard scope of delivery of the pre-assembled vertical ladder includes rigid wall brackets with a wall clearance of 200 mm. These are not included when modular construction elements are ordered. Please include them in your order. In addition, we offer you adjustable wall brackets for complex facades which you can order in place of the standard wall brackets. The maximum spacing between the individual attachment elements is 2.0 m (Accessories). Dowels and screws for attachment to the wall are not part of the scope of delivery. Please contact well-known dowel suppliers for information. The background must have a sufficient load-bearing capacity. Proof of this as well as correct mounting has to be provided for each building project and checked and approved by an expert responsible for structural stability. Detailed assembly instructions are included with the delivery. 166

167 Vertical ladders Modular kit system Entry and exit aids at the top Exit side-rail, straight Side-rail dimensions 60 x 25 mm, total length 1600 mm, useful length 1200 mm Fig. 2 pcs. order no with ladder Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Exit side-rail angled One-sided, angled. Side-rail dimensions 60 x 25 mm, total length 1600 mm, useful length 1200 mm Extension set for exit side-rail On one side, for extension on existing exit side-rails (see modular elements). Comprising handrail 500 mm and support section 1200 mm with floor bracket Material Order no. Anodised aluminium Bright aluminium Material Order no. Anodised aluminium Bright aluminium Galvanised steel Galvanised steel Fig. 2 pcs. order no with ladder Stainless steel Fig. 2 pcs. order no complete with 2 pcs. order no Stainless steel Fig Roof parapet bridging steps With grating, galvanised steel, des cending ladder: length 1220 mm, to be cut to size on site, passage width 536 mm, special widths on request, we recommend adjustable wall anchors (4 pcs) or foot plates (2 pcs.) for the bottom end of the descent. Order Material no. Anodised aluminium Bright aluminium Galvanised steel Stainless steel Fig Supporting handle With screw-on plates for attachment to the masonry Galvanised steel Length mm Stainless steel Length mm Vertical ladders 167

168 Vertical ladders Modular kit system Entry and exit aids at the top Roof parapet bridges in special lengths* With grating. Descending ladder: Length 1960 mm. To be cut to size on site. Passage width 536 mm, special widths on request. We recommend adjustable wall brackets (4 pcs.) or foot plates (2 pcs.) for the bottom end of the descent. Material Length mm Weight kg Bright aluminium Anodised aluminium Galvanised steel Stainless steel * Made to order, longer delivery times Exit step For widening the top step and reducing the gap width at the exit. Dimensions approx. 520 x mm. Made up of grooved rungs. Including 2 clamps for the ladder rail. Bright aluminium Galvanised steel Stainless steel * Fig in existing ladder Clearance mm Order no Clearance mm Order no Clearance mm Order no * Longer delivery times thanks to order-related production. Exit aid at the top 12 Vertical ladders Safety doors According to DIN EN ISO Automatically closing. Material bright aluminium fittings made of stainless steel. Easy mounting, adjustable passage width. Safety barrier Can only be used if a safety door cannot be employed for structural engineering reasons. Automatically closing spring mechanism. Can be used on the left and right. With red heat-shrink sleeve, to be screwed to ladder side-rail or exit side-rail. Length approx. 630 mm. Without fall stop rail Aluminium Automatically closing safety door order no fitted to the exit side-rail order no Fig

169 Vertical ladders Modular kit system Safety door with fall stop rail Automatically closing thanks to concealed spring mechanism, with pre-fitted fall stop rail, incl. stainless steel vertical ladder connector. Two entry and exit barriers self-locking through gravity. May only be fitted to steel/stainless steel. Roof parapet bridge with safety door and fall stop rail Automatically closing thanks to concealed spring mechanism, with pre-fitted fall stop rail, incl. stainless steel vertical ladder connector. Two entry and exit barriers self-locking through gravity. May only be fitted to steel/stainless steel. Galvanised steel Galvanised steel Stainless steel VA Stainless steel VA Fig fitted to compulsory accessory exit side-rail angled order no Fig comprising roof parapet bridge, 2 ladder sections, 1 safety door with fall stop rail Back protection Back protection hoop lateral exit Back protection hoop dia. 700 mm Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Back protection hoop offset construction Set comprising 2 hoops as shown with connection piece and mounting set. Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Back protection hoop strut 3000 mm long Material Material Anodised aluminium Bright aluminium Galvanised steel Anodised aluminium Bright aluminium Galvanised steel Stainless steel Stainless steel Safety strut for offset version 12 To enable safe gripping between successive side-rails on multiple-flight vertical ladders, EN ISO requires the intermediate space to be secured be an additional vertical ladder side-rail. Vertical ladders Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel

170 Transfer and intermediate platform Transfer platform between ladder sections Ø 700 mm Platform as a bridging step between two ladder sections. Vertical ladders Modular kit system Material Galvanised steel Stainless steel Fig in existing ladder Pull rope Intermediate platform, foldable Can be used as a rest platform for single-flight vertical ladders. Attachment by means of an additional bracket on the back protection. 1 bracket is included in the scope of delivery. Incl. pull rope for operation from above. Not suitable for emergency ladder systems according to DIN Dimensions approx. 600 x 300 mm. Material Anodised aluminium Bright aluminium Galvanised steel Stainless steel Access protection units for maintenance ladders in accordance with DIN Aluminium access ladder Lockable steel door 12 Hang-in, lockable. Length 2.5 m. Useful length approx. 1.7 m. Suitable for ascent heights from 4.5 m. Safety door with sheet metal panelling. Can be locked using a padlock provided by the customer. Passage block at the upper end, padlock to be provided by the customer. Vertical ladders Fig in existing ladder Material bright aluminium Fig in existing ladder Material steel

171 Vertical ladders Modular kit system Access protection units for escape ladders in accordance with DIN Aluminium emergency descent ladder 12 rungs. Automatic triggering of the ladder. Recommended dis tance to ground in retracted condition 2.5 m. Lever-operated release mechanism. Release from above. right aluminium. Protected access, rotatable The mechanical lock of the protected access is opened by means of a spring mechanism following manual actuation of the tilting lever and closed again by automatic locking by hand. Can be used for emergency ladder systems. Material galvanised steel Basic and expansion platforms/ rescue platforms Base platform Grating cover with two steel mounting brackets. Railing on one long side and the end. According to DIN Special brackets for ETICS facades / insulating facades on request. Surface load 3.5 kn/m², individual load 1.5 kn/m². 80 mm 120 mm 80 mm 120 mm Bracket flange Ø 12 mm Fig (on add. extension platform) Fig (flange plate and strut for brick masonry) For surface Width mm Depth mm Console dimension mm (screw spacing) Weight approx. kg Concrete Concrete The standard version of the base platform is suitable for mounting to concrete masonry. For brick masonry you also require two flange plates and two struts, please indicate the following order number. Additional flange plate & strut for Depth mm Console dimension mm (screw spacing) Brick masonry x Brick masonry x Vertical ladders 171

172 Vertical ladders Modular kit system Basic and expansion platforms/ rescue platform Extension platform Grating cover with one mounting bracket. Railing on one end incl. railing connector. Extension platforms can be screwed together as required. Surface load 3.5 kn/m², individual load 1.5 kn/m². 80 mm 120 mm 80 mm Bracket flange Ø 12 mm 120 mm For surface Width mm Depth mm Console dimension mm (screw spacing) Weight approx. kg Order no. Concrete Concrete Concrete Concrete Fig (on existing base platform) The standard version of the base platform is suitable for mounting to concrete masonry. For brick masonry you require a flange plate and a strut in addition, please indicate the following order number. Additional flange plate & strut for Depth mm Console dimension mm (screw spacing) Order no. Brick masonry x Brick masonry x Connecting brace Connecting brace Suitable for platform depth 800 mm For attachment between railing of the base or extension platform and the back protection hoop to close the gap there. Suitable for platform depth 1000 mm For attachment between railing of the base or extension platform and the back protection hoop to close the gap there Safety barrier Release mechanism for emergency ladders via safety barrier Automatic when barrier is operated. Required for accesses to the ladder less than 5.82 m vertical height and simultaneous use of the emergency ladder p Barrier made of galvanised steel Ø 16 Spacer segment Wall clearance adjustment range mm. 12 Vertical ladders For exit on the left, in conjunction with order no For exit on the right, in conjunction with order no Corner joint NEW! NEW! For basic platform 800/1000 mm We recommend the corner connector for stabilising the longitudinal and face side. Galvanised steel Galvanised steel Adapter plate The adapter plate is required for brick masonry to enlarge the wall plug distance and the screwing surface. Suitable for wall bracket and distance segment. W x H x D 300 x 300 x 8 mm, 5.7 kg Hot-dip galvanised Stainless steel, bore hole spacing attachment 150 x 150 mm Fig

173 Vertical ladders Modular kit system Base and extension platforms and rescue platforms for roof exit Exit railing at the side As a rule, equipment for the protection of persons is required at exit points and should preferably consist of railings on both sides of the vertical ladder, see DIN EN ISO Dimensions approx x 1500 mm. Including 2 clamps for the exit side-rail. Attachment using ground bracket or ballast weight mm approx. 600 mm. Incl. extension spacer with mounting kit and connecting parts for vertical ladder mm 1200 mm 1020 mm Fig (2 pcs.) with compulsory accessories order no (2 pcs.) and order no (2 pcs.) on existing ladder. Bright aluminium with ground bracket and toe board Bright aluminium with ballast weights Weight approx. kg Mounting kit and connecting parts for vertical ladder Mounting set for extension spacer The mounting set comprises two side-rail profiles 500 mm long (dimensions: 60 x 25 mm) which can be sawn to size as required and attached to the exit side-rail and exit railing using the screws provided. Material Bright aluminium Rescue platform for roof exit According to DIN Rescue platform made of highquality aluminium, connecting elements made of stainless steel, extremely weather-proof, stable surface. Standing surface 800 mm wide, element length from 1500 mm, safety railing on three sides with 1000 or 1100 mm protection height. Complete with supporting structure, supporting bases and sealing elements. The supporting structure is adaptable to the roof slope. The rescue platforms are available with end-to-end safety railing on the front or rescue opening with built-in rescue door. The safety door is not included in the standard scope of delivery. The railing and the safety door have toe and knee boards. The rescue platforms have been designed for a vertical load of 500 kg/m 2. Your individual dimensions on request Further special versions on request. 12 Vertical ladders 173

174 SMART TIPS! KEY FEATURES OF OUR SPECIAL-PURPOSE PRODUCTS! Working trestles Foldable or height-adjustable Functional and stable High stability thanks to nivello ladder shoe Window cleaner s ladder made of aluminium Plug-fit ladder sections Easy storage Handy to use Single-rail mast ladders Simple, universal use, easy assembly With integrated fall protection Roof ladders Suitable for all standard roof coverings and inclinations up to 60 In 3 lengths and 4 colour variants 13 Special-purpose products EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information 174

175 SPECIAL-PURPOSE PRODUCTS Ladders in accordance with German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I-694) and applicable DGUV regulations. Window cleaner s ladder made of aluminium with nivello stabiliser Easy-to-handle ladder sections, push-in connections with locking device, upper section of the ladder with rollers and non-abrasive wedge-shaped lay-on rubber pads, non-slip ladder shoes, permissible load of the 4-section set 100 kg, in accordance with DIN Lower section of the ladder with nivello stabiliser 0.90 m in width and non-slip nivello ladder shoes on both sides for extremely safe standing and high working safety. The nivello stabiliser is included separately and is screwed on the lower end of the side-rail in two places. Ladder combination 2-section 3-section 4-section set set set Working height up to approx. m Ladder length m Ladder width top/bottom mm 140/ / /900 Number of rungs Weight approx. kg Fig Single bottom section Single middle section Single upper section Ladder length m Ladder width top/bottom mm 340/ / /430 Height of side-rails mm Weight approx. kg Number of rungs Aluminium upper section for window cleaner s ladder Short upper ladder section with wheels, length 1.68 m. Ideal for space-saving transport and storage. With non-abrasive wedge-shaped pad and non-slip ladder shoes. Fig , 12006, Fig Ladder length m 1.68 Ladder width top/bottom mm 140/430 Number of rungs 4 Weight approx. kg Attachable section with wheels and lay-on rubber pads, suitable for straight, push-up and ropeoperated extension ladders. Length m 1.00 Width mm 0.29 Weight approx. kg Special-purpose products Fig

176 Mast hanging ladder Special-purpose products Mast ladder Stable construction with hanging hook Ø 320 mm made of galvanised steel and safety chains with snap hooks. Ladders for higher loads on request. Fig Ladder length incl. hook m Ladder width m Height of side-rails mm Number of rungs Load capacity vertically hanging kg Weight approx. kg Single-rail mast ladder with integrated fall protection According to European Standard DIN EN The aluminium ladder units are placed on the all-terrain ladder foot, which compensates ground unevenness automatically and secured by quick-release locks. A ladder unit is fastened to the mast using the 2 ratchet straps included in the scope of delivery. The ratchet straps can be hooked into the ladder unit quickly and easily using snap hooks. The hoisting device can be reconnected left to right by 180. This makes the transport of ladder units upwards or downwards easier. The fitter is secured against fall by the safety belt with safety strap runner in the fall stop rail as soon as the first ladder unit has been placed. Ladder width 0.37 m. Material bright aluminium. Fastening suitable for mast min. Ø 200 mm, max m. See chapter 11 for safety strap runner and safety belt. Special-purpose products Ladder Ladder section Ladder section Hoisting base 1.12 m 1.96 m device

177 Special-purpose products Tank vehicle ladder Takes the requirement regarding material strength and stability of European Standard DIN EN into account Tank vehicle ladder Two-part ladder with platform and safety cage, heightadjustable. Guide and connection parts in stainless steel. Chassis yellow powder-coated with 4 wheels, edged non-slip rungs. The platform height of the tank vehicle ladder can be adjusted using a cable winch with a spacing of 280 mm. Locking from rung to rung, platform with R 13, grating cover, railing on both sides with toe and knee board, front side of platform with 2-part safety door and safety cage (this can be selected as an option and must be ordered separately). The tank vehicle ladder is constructed solely for access when performing operation or inspection tasks during loading or unloading of the tank. The tank vehicle ladder is available in 3 chassis versions that only differ in terms of the chassis. Type 1 has 4 swivel castors Ø 150 mm allowing flexibly positioning of the tank vehicle ladders. Type 2 has 2 swivel castors Ø 150 mm on the ascent and 2 rollers Ø 280 mm on the support part. Type 8 has 4 swivel castors Ø 150 mm and central lever gears Pressing the chassis lever will lower the chassis for more stability and can be lifted again for moving. This tank vehicle ladders can be positioned by one person. Delivery time: 15 working days. Fig and Type 1 Type 2 Type 8 Total height max. mm Total length max. mm Total width max. mm Platform height max. mm Platform height min. mm Max. load kg Platform length mm Swivel castors with locking device 4 x Ø x Ø x Ø 150 Wheels - 2 x Ø Platform width mm Weight approx. kg Chassis Type 1 has 4 swivel castors Ø 150 mm. Type 2 has 2 swivel castors Ø 50 mm on the ascent and 2 rollers Ø 280 mm on the support part. Type 8 has 4 swivel castors Ø 150 mm and central lever gears. Pressing the chassis lever will lower the chassis for more stability and can be lifted again for moving. 13 Special-purpose products Chassis type 1 Chassis type 2 Chassis type 8 177

178 Special-purpose products accessories tank vehicle ladders Accessories NEW! Fig Fig Fig Tank vehicle ladder safety cage The safety cage serves as fall protection during operating or inspection work. One of the two safety cage versions must be used. Version rectangular round Safety cage approx. mm 1500 x 1500 x 600 Ø 1320 x Safety cage square with a retractable toe board The safety cage with a retractable toe board services as a fall guard during the operating and control work. Thanks to the retractable toe board, the safety cage can be adapted more easily to the contour of the vehicle Supporting spindles The supporting spindle has been designed exclusively for stabilising or locking the tank vehicle ladder in place. 1 set = 2 supporting spindles Spindle winches Compensation of uneven ground and partial raising of the tank vehicle ladder. 1 set = 2 supporting spindles Cable winch, force-guided brakes Action goes easy on the rope and makes optimum use of the rope drum volume. NEW! Bumper strip for face-sided platform The bumper strip prevents damage to the tank vehicle. Surcharge for replacement of the standard winch with a special winch Special-purpose products NEW! Ground strap To guarantee the electrical conductivity of the tank vehicle ladder. Available for tank vehicle ladder Type 1,2 and

179 Special-purpose products ML working trestle ML working trestle folding Sturdy aluminium design, side bars in rectangular profiles, Cross bracing thanks to welded square rungs. High stability thanks to spreader lock with 2 high-strength nylon straps below the rungs, side bars with inner shoes and cover caps, non-slip surface thanks to screen print coating, just 110 mm wide when folded. NEW! Fig Height of the working trestle approx. m 0.81 Dimensions unfolded W x D x H m 0.90 x 0.59 x 0.81 Dimensions folded W x D x H m 0.90 x 0.11 x 0.87 Max. load kg Weight approx. kg Special-purpose products 179

180 Special-purpose products Working trestle, loading input Aluminium working trestle, height adjustable Stable aluminium structure, gradual height adjustment from approx mm, safe locking thanks to clamping lever on each adjustment tube, cross reinforcement on both sections. Bases with adjustment screws for level compensation, exchangeable wear cover 1000 x 60 x 25 mm made of fir, all side-rail ends closed. Adjustment range approx. m Base area WxD m 0.50 x 0.78 Max. load kg Weight approx. kg Fig Aluminium working trestle, foldable Stable aluminium structure, side-rails made of rectangular profiles, cross reinforcement through edged rectangular rungs, sturdy steel hinges, high stability thanks to spreader lock with 2 high-strength nylon straps, non-slip nivello ladder shoes, upper cover 73 mm wide thanks to 2 aluminium profiles, only 150 mm wide when folded up. Height of the working trestle approx. m 0.81 Base area WxD m 0.90 x 0.71 Max. load kg Weight approx. kg Fig Aluminium loading bridge Sturdy loading bridge made of non-slip, grooved aluminium. With toe boards at the side. The load can be moved into or out of the vehicle in one movement. Length approx. 2 m, max. load 700 kg. 13 Special-purpose products Working width m 0.80 Total width m 0.85 Length m 1.92 Side profile mm 98 Max. load kg Weight approx. kg Fig with order no (2 pcs.) and order no

181 Special-purpose products Transport box Aluminium transport box, stackable For universal use e.g. as protective packaging for tools and measuring instruments, sports accessories, hobby utensils, photo equipment or camping equipment. Stable construction with all-round beads, multiple riveting of lid hinges with stacking corners, all-round seal in the edge profile, snap-down locks with fixture for padlock or cylinder lock (see below). Comfortable handles. Fig Fig (2 pcs.) with order no Outside dimensions mm 582x385x x385x x385x x495x x585x x585x x790x515 Inside dimensions mm 550x350x x350x x350x x460x x550x x550x x755x485 Contents approx. litres Weight approx. kg Lock set With 2 keys, keyed differently Lock set With 2 keys, keyed the same Carriage made of aluminium For easy and convenient movement of the aluminium transport boxes. Stable aluminium angles, 2 fixed castors Ø 125 mm, 2 swivel castors Ø 125 mm with locking device. Load 150 kg. Shipment disassembled, assembly instructions included. Suitable for transport boxes 11136/ / Special-purpose products 181

182 Special-purpose products Straight ladder, roof ladder Slater-and-tiler lie-up ladder made of wood To lay onto roof slopes up to 75 and for load distribution during roofing work. Side-rails made of choice and knot-free coniferous wood with bevelled ends for easy pushing of the ladder. With sturdy rungs curved upwards made of knot-free ash wood. The side-rails and rungs are bonded water-resistant, coated weather-proof and screwed down four times per rung in addition. Ladder width 350 mm, spacing between rungs 280 mm. Note: according to BGR 203 on roofing work, slater-and-tiler lie-up ladders have to be hooked in to safety roof hooks according to DIN EN 517. They must not be hung into the topmost rung. Slater-and-tiler lie-up ladders are not suitable for use as straight ladders. Ladder length approx. m Number of rungs Weight approx. kg Fig Roof ladder made of aluminium Suitable for all standard roof coverings and inclinations up to 60. Side-rails made of sturdy aluminium profile, rungs with multiple attachment and strong grooves for safe standing at all permissible inclinations. Ladder width 330 mm. The large spacing between roof covering and rung protects the roof covering from damage. Each ladder has standard connecting straps so that any number of ladders can be screwed to each other without any problems. Roof ladders are available in 3 lengths (1.96 m / 2.80 m / 4.20 m) and 5 versions (natural aluminium, coated brick red, coated brown RAL 8028, coated red-brown, coated anthracite grey RAL 7016). Accessories not included in the scope of delivery. See the following pages for accessories for your roof ladders. 13 Deviations in colour are possible due to the printing process. Special-purpose products Fig Aluminium Red Brown Red-brown Anthracite grey Version Alu Alu Alu Red Red Red Brown Brown Brown Redbrowbrowbrown Red- Red- Anthracite grey Anthracite grey Anthracite grey Ladder length m Number of rungs Weight approx. kg

183 Special-purpose products accessories roof ladders Accessories for roof ladders Roof hooks for pan tiles and single-hip tiles Complete with grooved nails. Roof hooks must be attached to the middle of the rafter, at least 2 hooks are required for the first ladder, at least 1 hook is required for each further ladder. In accordance with Construction Product Regulation (BauPVO) 305/2011 (EU) and DIN EN 517 (you will find the declaration of performance on our website). Roof hook Galv. steel Red Brown Red-brown Anthracite grey Fig Roof hooks for plain tiles Roof hook Galv. steel Red Brown Red-brown Anthracite grey Coloured roof hooks are hot-galvanised and powder-coated. Safety roof hooks in accordance with DIN EN 517 must be fitted to roofs with a slope of > 20 and < 75. They must be distributed on the roof surface as follows: Top row < 1.0 m below the roof ridge Intermediate rows at a distance of < 5.0 m from the respective row above Bottom row < 1.5 m above the eaves, measured in the roof inclination The horizontal spacing of the safety hooks in one row must not exceed more than 2.0 m. To be applied in case of eaves heights of over 3.0 m! Fig Clamp mounting For the attachment and securing of roof ladders on the lower roof hook. Clamp mounting Stainless steel V4A (1.4571) Fig Standing grille 800 x 250 mm, complete with sub-assembly, for easy self-installation (instructions included). In accordance with Construction Product Regulation (BauPVO) 305/2011 (EU) and DIN EN 516 (you will find the declaration of performance on our website). Standing grille Galv. steel Red Brown Red-brown Anthracite grey Fig Plastic cover Glazed roof tiles have may advantages but they are sensitive to mechanical loads. For this reason, we offer to provide the lower sides of the roof ladders with a protective cover for glazed roof tiles. This cover is made of black EPDM plastic and is self-adhesive. Simply remove any oil, dirt etc. from the roof ladder, pull of the protective backing and stick the cover in place - that's it. Plastic cover (1 set = 2 pcs.) For roof ladder length m Special-purpose products Fig

184 SMART TIPS! KEY FEATURES OF OUR MOBILE SCAFFOLDINGS! years quality guarantee standard products Fall protection Railing with integrated knee board for guaranteed safety Modular construction system Easy and fast installation without tools More than 180 variants Roof, chimney, folding and mobile scaffolds, ladder platforms Innovative Product details with quality Aluminium boards, height-adjustable for levelling, castors with central load application when braked, self-locking pawls Innovative spring clip for plug-on frames no unintentional slacking, captive, permanently fitted All parts Easily available at genuine part price 14 EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days. See page 227 for detailed information 184

185 MOBILE SCAFFOLDINGS With design approval according to European Standard DIN EN 1004, Ordinance on Industrial Safety and Health (BetrSichV), TRBS 2121 and applicable handling instructions BGI 663. Protective assembly railing: Fall protection for mobile scaffoldings When mobile scaffoldings are assembled or disassembled, the risk of falls increases whenever the work process reaches the point when the railing has already been disassembled or has not been assembled yet and persons are on the platform. The term of leading railing is known from the field of facade scaffoldings. GÜNZBURGER STEIGTECHNIK now offers a corresponding additional folding frame as a protective assembly railing for the respective scaffolding length of 1.8 m, 2.45 m and 3.0 m which distinctly reduces the risk of a fall. These additional frames are secured from the ground or from the platform already secured by struts using clamps on the scaffold frames and secured by snap-in hooks. Two additional hooks which snap into the platform ensure high lateral stability. Particularly in the case of high scaffolding heights, the protective assembly railing offers a plus in protection against falls and simply more secured working. Installation without need of tools, straightforward and easy to handle. Fig The foldable additional frame is easy and space-saving to handle. Foldable additional frame in welded construction made of round aluminium tube 50 x 1.5 mm. Additional frame suitable for scaffolding dimensions m Width m Height m Transport dimensions m 1.91 x 0.22 x x 0.22 x x 0.22 x 0.87 Weight approx. kg TIP: Contact your employers' liability insurance association and the DGUV (German Social Accident Insurance) concerning inspection documents and records. Use our check list for the inspec tion according to BetrSichV: free download at > Service. Snap-in hooks fasten the protective assembly railing securely to the scaffold frames. Before anyone climbs onto the first platform, the additional frame is fitted effortlessly from the ground. Clip tray As per BetrSichV 3 (3) and TRBS 2121 part 1, mobile scaffoldings must be subjected to testing each time there is a new set-up, after they have not been used for a longer period, following unusual events, such as accidents or natural phenomena acting on the scaffolding, for example, a heavy storm. The documents must accompany the scaffolding and be attached to it. The weather- and UV-resistant clip tray keeps the documents safe from the influences of the weather while keeping the documents easily visible on the mobile scaffolding. The clip tray is easy to attach and remove and encloses the scaffolding tube. The inspection documents are inserted and the clip fixed to the tube. Suitable for round tube Ø 40 mm and Ø 50 mm. Suitable for round tube Ø 40 mm 50 mm Secured by the "leading rail", the platform can be accessed without danger and can be used to continue scaffolding work. The protective assembly railing is then hooked in "leadingly" for the following platform before the next level is accessed. Roof, chimney, folding and mobile scaffolds, ladder platforms

186 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with chassis bar* Can be assembled very quickly and without tools, high stability, flexible. Easy to handle and rewarding price/performance ratio. Chassis bar 4 large swivel castors Ø 200 mm with centric load application, with locking devices and spindles for height compensation. Choose between the following scaffolding dimensions: 0.75 m x 1.80 m, 2.45 m or 3.00 m. The mobile scaffolding can be moved on the chassis bar by undoing 8 screw connections and positioned from the centre to the wall side. All scaffolding parts are separately available as spare parts. Technical overview: Fig Tested to DIN EN 1004 Load class / scaffolding group 3, 2.0 kn/m 2 Working reaches up to m Scaffolding dimensions: 0.75 x 1.80 m / 0.75 x 2.45 m / 0.75 x 3.00 m Swivel castors Ø 200 mm Plug-in connections and quick-release locks on the frame sections or struts Design according to the modular principle = reliable spare parts supply Roof, chimney, folding and mobile scaffolds, ladder platforms 14 * Chassis bar not included in the standard scope of delivery for a platform height of 2.45 m, since not required. Working height up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 0.75 m x Weight approx. kg

187 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 0.75 x 1.80 m Scaffolding dimensions 0.75 x 2.45 m Scaffolding dimensions 0.75 x 3.00 m Platform height m Parts list Order no. Order no. Order no. Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Chassis bar 2.00 m Swivel castor Ø 200 mm Step-on bracket n.m. = not possible n.z. = not permissible Ballast kg Ballast kg Ballast kg Use indoors Centre set-up Side set-up n.m n.m n.m Use outdoors Centre set-up n.z. n.z. n.z n.z. n.z. n.z n.z. n.z. n.z. Side set-up n.m n.z. n.z. n.z. n.m n.z. n.z. n.z. n.m n.z. n.z. n.z. Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Roof, chimney, folding and mobile scaffolds, ladder platforms Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm

188 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with chassis bar* and double-size platform Inexpensive, universally usable standard scaffolding with especially large working area. Choose between the following scaffolding dimensions: 1.35 m x 1.80 m, 2.45 m or 3.00 m. Safe standing ensured by wide chassis bars, carriage with 4 large swivel castors Ø 200 mm with central load application, with locking devices and spindles for height compensation. The scaffolding is assembled and disassembled quickly and without tools thanks to plug-in connections and quick-release locks. Low weight of the individual parts. Technical overview: Fig Tested to DIN EN 1004 Load class / scaffolding group 3, 2.0 kn/m 2 Working reaches up to m Scaffolding dimensions: 1.35 x 1.80 m / 1.35 x 2.45 m / 1.35 x 3.00 m Swivel castors Ø 200 mm Plug-in connections and quick-release locks on the frame sections or struts Design according to the modular principle = reliable spare parts supply Roof, chimney, folding and mobile scaffolds, ladder platforms 14 * Chassis bar not included in the standard scope of delivery for a platform height of 2.45 m and 3.45 m, since not required. Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 1.35 m x Weight approx. kg

189 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 1.35 x 1.80 m 1.35 x 2.45 m 1.35 x 3.00 m Platform height m Parts list Order no. Order no. Order no. Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Platform without trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Chassis bar 2.00 m Swivel castor Ø 200 mm Step-on bracket n.m. = not possible n.z. = not permissible Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms Use indoors Ballast kg Ballast kg Ballast kg Centre set-up Side set-up n.m. n.m n.m. n.m n.m. n.m Use outdoors Centre set-up n.z. n.z. n.z. n.z n.z. n.z. n.z. n.z n.z. n.z. n.z. n.z. Side set-up n.m. n.m n.z. n.z. n.z. n.z. n.m. n.m n.z. n.z. n.z. n.z. n.m. n.m n.z. n.z. n.z. n.z

190 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with platforms at a spacing of 2.0 m, with chassis bar Like all mobile scaffoldings, this scaffolding made of aluminium has been consequently designed according to the modular principle, can be quickly assembled and disassembled thanks to plug-in connections and snap fasteners on the struts and is operational in just a few simple steps. Low weight and little space required by the components facilitate and rationalise the transport between warehouse and place of use. The scaffolding is built from platform to platform: You stand safely on the lower level and continue building upwards from there. The scaffolding can be moved to the right or left on the chassis bar by means of screw connections. This saves valuable time to adapt the unit when working on facades. 4 large swivel castors Ø 200 mm with centric load application, with locking devices and spindles for height compensation ensure convenient handling and stability. Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Tested to DIN EN 1004 Load class/scaffolding group 3, 2.0 kn / m 2 Working reaches up to m Scaffolding dimensions: 0.75 x 1.80 m / 0.75 x 2.45 m / 0.75 x 3.00 m Set-up of platform to platform at a spacing of 2.00 m High stability thanks to wide chassis bar Height adjustment by spindles Swivel castors Ø 200 mm 14 Mobile scaffolding made of aluminium with chassis bar*, platforms at a spacing of 2.0 m Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 0.75 m x Weight approx. kg * Chassis bar not included in the standard scope of delivery for a platform height of 2.45 m, since not required. 190

191 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 0.75 x 1.80 m 0.75 x 2.45 m 0.75 x 3.00 m Platform height m Parts list Order no. Order no. Order no. Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Chassis bar 2.00 m Swivel castor Ø 200 mm Step-on bracket n.m. = not possible n.z. = not permissible Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms Use indoors Ballast kg Ballast kg Ballast kg Centre set-up Side set-up n.m n.m n.m Use outdoors Centre set-up n.z. n.z. n.z n.z. n.z. n.z n.z. n.z. n.z. Side set-up n.m n.z. n.z. n.z. n.m n.z. n.z. n.z. n.m n.z. n.z. n.z

192 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with platforms at a spacing of 2.0 m with outrigger The ideal mobile scaffolding where there is not a lot of space. The adjustable outriggers allow for multiple adaptations. When fully extended, the outriggers provide secure support on any surface and guarantee safe working conditions at large heights. When the outriggers are retracted, the mobile scaffolding can be moved through alleys, doorways etc. or can be used for wall-side application without any problems. Low weight, push-in connections on the frame sections, snap fasteners on the braces, exact height compensation by spindles and 4 large swivel castors Ø 200 mm with centric load application stand for easy handling. All the scaffolding parts for this mobile scaffolding type are also available as spare parts or extension parts. You can choose choice between 3 scaffolding dimensions: 0.75 x 1.80 m, 0.75 x 2.45 m or 0.75 x 3.00 m. Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Tested to DIN EN 1004 Load class/scaffolding group 3, 2.0 kn / m 2 Working reaches up to m Scaffolding dimensions: 0.75 x 1.80 m / 0.75 x 2.45 m / 0.75 x 3.00 m Set-up of platform to platform at a spacing of 2.00 m Height adjustment by spindles Swivel castors Ø 200 mm Outriggers adjustable 14 Mobile scaffolding made of aluminium with adjustable outriggers**, platforms at a spacing of 2.0 m Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 0.75 m x Weight approx. kg * For platform heights m = 3.0 m - clearace between last and second to last platform **Outriggers not included in the standard scope of delivery for a platform height of 2.35 m, since not required. 192

193 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 0.75 x 1.80 m 0.75 x 2.45 m 0.75 x 3.00 m Platform height m Parts list Order no. Order no. Order no. Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Outrigger Swivel castor Ø 200 mm Step-on bracket Ballast kg Ballast kg Ballast kg Use indoors Centre set-up Side set-up Use outdoors Centre set-up Side set-up n.m. = not possible n.z. = not permissible x10 4x20 4x20 4x40 4x x10 4x20 4x20 4x40 4x x10 4x30 4x x10 4x30 4x x20 4x x20 4x x10 4x50 n.z. n.z. n.z x30 n.m. n.z. n.z. n.z n.m. n.z. n.z. n.z. 4x x10 4x50 n.z. n.z. n.z x30 n.m. n.z. n.z. n.z n.m. n.z. n.z. n.z. 4x40 Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms

194 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with adjustable outriggers* The ideal mobile scaffolding where there is not a lot of space. The adjustable outriggers allow for multiple adaptations. When fully extended, the outriggers provide secure support on any surface and guarantee safe working conditions at large heights. When the outriggers are retracted, the mobile scaffolding can be moved through alleys, doorways etc. or can be used for wall-side application without any problems. Low weight, push-in connections on the frame sections, snap fasteners on the braces, exact height compensation by spindles and 4 large swivel castors Ø 200 mm with centric load application stand for easy handling. All the scaffolding parts for this mobile scaffolding type are also available as spare parts or extension parts. You have a choice between 3 scaffolding dimensions: 0.75 x 1.80 m, 0.75 x 2.45 m or 0.75 x 3.00 m. Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Technical overview: Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Tested to DIN EN 1004 Load class / scaffolding group 3, 2.0 kn/m 2 Working reaches up to m Swivel castors Ø 200 mm Scaffolding dimensions: 0.75 x 1.80 m / 0.75 x 2.45 m / 0.75 x 3.00 m Outriggers adjustable 14 *Outriggers not included in the standard scope of delivery for a platform height of 2.35 m, since not required. Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 0.75 m x Weight approx. kg

195 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 0.75 x 1.80 m 0.75 x 2.45 m 0.75 x 3.00 m Platform height m Parts list Order no. Order no. Order no. Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Triangular outrigger Swivel castor Ø 200 mm Step-on bracket Ballast kg Ballast kg Ballast kg Use indoors Centre set-up x x10 4x x10 4x20 4x30 4x40 4x x10 4x20 Side set-up n.m x n.m x10 4x x10 4x20 4x30 4x40 4x30 n.m x10 4x20 Use outdoors Centre set-up x n.z. n.z. n.z x30 4x40 4x50 n.z. n.z. n.z n.z. n.z. n.z. 4x10 4x30 4x50 Side set-up n.m x n.z. n.z. n.z. n.m x30 4x40 4x50 n.z. n.z. n.z. n.m n.z. n.z. n.z. 4x10 4x30 4x50 n.m. = not possible n.z. = not permissible Safe and space-saving: Adjustable outrigger with swivel base When extended: firm stand and safe working conditions When retracted: suitable for wall-side set-up and transport through doorways, alleys etc. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms

196 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with adjustable outriggers* and double-size platform Universally usable mobile scaffolding with double-size platform (scaffolding width 1.35 m). Available in the scaffolding dimensions: 1.35 x 1.80 m, 1.35 x 2.45 m and 1.35 x 3.00 m. This gives you a safe and spacious workplace with Working reaches at a spacing of 1,00 m from 4.40 to m. Extended outriggers ensure safe standing conditions. Retracted outriggers save space and make it easier in confined spaces to move the scaffolding to the next place of use. Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Tested to DIN EN 1004 Load class / scaffolding group 3, 2.0 kn/m 2 Working reaches up to m Scaffolding dimensions: 1.35 x 1.80 m, 2.45 m or 3.00 m Swivel castors Ø 200 mm Outriggers adjustable 14 *Outriggers not included in the standard scope of delivery for a platform height of 2.35 m and 3.35 m, since not required. Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions 1.35 m x Weight approx. kg

197 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 1.35 x 1.80 m 1.35 x 2.45 m 1.35 x 3.00 m Platform height m Parts list Order no Order no Order no Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Platform without trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Triangular outrigger Swivel castor Ø 200 mm Step-on bracket Ballast kg Ballast kg Ballast kg Use indoors Centre set-up x20 4x Side set-up n.m. n.m x20 4x30 n.m. n.m n.m. n.m Use outdoors Centre set-up x n.z. n.z. n.z. n.z. 4x x10 4x40 n.z. n.z. n.z. n.z x10 n.z. n.z. n.z. n.z. 4x40 Side set-up n.m. n.m x n.z. n.z. n.z. n.z. 4x40 n.m. n.m x10 4x40 n.z. n.z. n.z. n.z. n.m. n.m x10 n.z. n.z. n.z. n.z. 4x40 n.m. = not possible n.z. = not permissible You do not require any tools for assembly and disassembly. The scaffolding is ready for use very quickly thanks to plug-in connections, quick-release locks and spindles for height compensation. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms

198 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Mobile scaffolding made of aluminium with inclined steps This mobile scaffolding is a suitable ascending aid for work that requires frequent ascent and descent as well as transport of loads. The inclined ascents from platform to platform with a depth of 100 mm can be walked up and down forwards and backwards comfortably and safely like on a stairway. The entry frame allows unobstructed access with tools, equipment and bulky parts. Handrails ensure additional safety. The scaffolding can be assembled and disassembled without tools. The platforms facilitate this by their spacing of 2.00 m. The 4 large swivel castors Ø 200 mm with centric load application, locking devices and spindles for height compensation permit easy handling and safe standing. All scaffolding parts are separately available as spare parts. You have a choice between 3 scaffolding dimensions: 1.35 x 1.80 m, 1.35 x 2.45 m or 1.35 x 3.00 m Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Tested to DIN EN 1004 Load class / scaffolding group 3, 2.0 kn/m 2 Working reaches up to m Scaffolding dimensions: 1.35 x 1.80 m / 1.35 x 2.45 m / 1.35 x 3.00 m Inclined ascents with solid handrail from platform to platform Large entry frame Fig with ballast weights order no Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. 14 Mobile scaffolding made of aluminium with adjustable outriggers*, platforms at a spacing of 2.0 m Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 1.35 x x x x x x 3.00 Weight approx. kg *Outriggers not included in the standard scope of delivery for a platform height of 2.35 m and 3.35 m, since not required. 198

199 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 1.35 x 1.80 m 1.35 x 2.45 m 1.35 x 3.00 m Platform height m Parts list Entry frame Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Platform without trapdoor Toe board, front side Toe board, long side Push-up bottom Push-up Handrail Handrail top Diagonal brace Horizontal strut Triangular outrigger Swivel castor Ø 200 mm Step-on bracket Ballast kg Ballast kg Ballast kg Use indoors Centre set-up x Side set-up n.m x10 n.m n.m Use outdoors Centre set-up n.z. n.z n.z. n.z x10 4x20 4x40 n.z. n.z. Roof, chimney, folding and mobile scaffolds, ladder platforms Side set-up n.m x10 n.z. n.z. n.m x20 n.z. n.z. n.m x40 n.z. n.z x x x x x x x x x

200 Roof, chimney, folding and mobile scaffolds, ladder platforms ML scaffolding ML scaffolding The ML scaffolding is the entry-level model for mobile scaffoldings with professional "Made in Germany" quality. It is compact, light and yet stable at the same time. The hook-in wooden platform board provides a safe and non-slip stance. The ML scaffolding is fitted with 4 smooth-running swivel castors Ø 125 mm with locking device. Optional outriggers increase standing safety if required. The outriggers can be adjusted gradually without tools, adapted to the ground and retracted in a space-saving way. When extended, you get a scaffolding dimensions of 0.60 x 1.60 m with the ML scaffolding. The platform can be attached at different heights, enable Working reaches of up to 3.00 m to be reached. Delivery is made in component groups. Assembly and installation instructions included. Load class/scaffolding group 2, 1.5 kn/m 2. Overview of product highlights: In accordance with BGR 173 small scaffoldings Compact, light and stable Mobile scaffolding ready to use quickly Space-saving storage and transport Fig Roof, chimney, folding and mobile scaffolds, ladder platforms Product video ML scaffolding Standing platform is quickly hooked into place 4 smooth-running swivel castors Ø 125 mm with locking device 14 Folding scaffolding w/o tel. outrigger Folding scaffolding w. tel. outrigger Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 0.60 x x 1.60 Weight approx. kg Telescopic outrigger 1 set = 4 units 200

201 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Standard folding scaffolding made of aluminium, for narrow passages If space is tight, folding scaffolding is the right solution: They fit through any standard door and only takes up a little space when folded up. When it is extended, you get a scaffolding dimension of: 0.75 x 1.80 m or 1.35 x 1.80 m, which allows Working reaches of up to 3.00 m to be achieved. 4 swivel castors Ø 125 mm with locking device. Self-locking folding hinge. The non-slip platform guarantees a firm stand. Delivery is made in component groups. Once assembled completely, the scaffolding can be quickly assembled and disassembled without tools. GS tested, load capacity 1.5 kn/m 2. Technical overview: GS-tested Foldable Self-locking folding hinge Working reach up to approx m Scaffolding dimensions: 0.75 x 1.80 m / 1.35 x 1.80 m 4 swivel castors Ø 125 mm with locking device Load capacity: 1.5 kn/m 2 Fig Scaffolding dimensions 0.75 x 1.80 m 1.35 x 1.80 m Platform height m Parts list Folding frame unit with 4 swivel castors Ø 125 mm with locking device Folding frame unit with 4 swivel castors Ø 125 mm with locking device Platform without trapdoor Fig Fig Roof, chimney, folding and mobile scaffolds, ladder platforms 14 Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 0.75 x x 1.80 Weight approx. kg

202 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Folding scaffolding made of aluminium with extension unit The folding scaffolding with extension unit offers even more safety during ascent and working as well as additional usage advantages. Thanks to the quickly and easy to assemble extension unit, you can reach a working reach of up to 3.60 m. The non-slip platform comes with a large trapdoor, a stable railing on the left and right serves as fall protection in accordance with the legal regulations. When folded together, the scaffolding requires little space for storage and transport. Available scaffolding dimensions 0.75 x 1.80 m / 1.35 x 1.80 m. 4 swivel castors Ø 125 mm with locking device. Self-locking folding hinge. GS tested, load capacity 1.5 kn/m 2. Delivery is made in component groups. Once assembled completely, the scaffolding can be quickly assembled and disassembled without tools. For ballasts see assembly instructions. Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Fig with attachment LKW Fig Fig GS-tested Working reach up to approx m Platform with trapdoor Railing Scaffolding dimensions: 0.75 x 1.80 m / 1.35 x 1.80 m 4 swivel castors Ø 125 mm with locking device Load capacity: 1.5 kn/m 2 Scaffolding dimensions 0.75 x 1.80 m 1.35 x 1.80 m Platform height m Parts list Folding frame unit with 4 swivel castors Ø 125 mm with locking device Folding frame unit with 4 swivel castors Ø 125 mm with locking device Platform with trapdoor Platform without trapdoor Horizontal strut Railing frame 0.75 m Railing frame 1.35 m Ballast kg Scaffolding dimensions m 0.75 x x 1.80 Platform height m Use indoors Use outdoors Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 0.75 x x 1.80 Weight approx. kg

203 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Folding scaffolding made of aluminium with triple platform This scaffolding made of aluminium with its platform of about 3.25 m 2 is the right product for overhead work on large ceiling areas. The double folding frame with 4 swivel castors of Ø 125 mm and 4 height-adjustable stand tubes allow assembly, modification and disassembly in a short time. The platform height can be set from a height of 0.53 m m in steps of 15 cm. Technical overview: GS-tested Foldable Self-locking folding hinge Working reaches: 2.30 to 3.80 m, adjustable at a spacing of 15 cm Scaffolding dimension: 1.90 x 1.90 m Load capacity: 1.5 kn/m 2 4 swivel castors Ø 125 mm with locking device 4 height-adjustable stand tubes Fig with ladder order no Working reach up to approx. m 3.70 Scaffolding height m Platform height m Scaffolding dimensions m Weight approx. kg Accessories: Push-up ladder with self-locking snap fasteners, 2-part, hook-in type for folding trestle. Fig Roof, chimney, folding and mobile scaffolds, ladder platforms

204 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Folding scaffolding made of aluminium with triple platform With its platform size of approx m 2, this platform offers a lot of space for tools, material and employees. The basic version already has a working height of up to 4.40 m. Depending on the type, up to m can be reached. The triple platform is particularly suitable for work such as working on ceiling areas etc. 4 large swivel castors with Ø 200 mm with centric load application, locking devices and spindles guarantee safe standing, exact height compensation and easy movement. Technical overview: Fig GS-tested According to DIN EN 1004 Foldable Self-locking folding hinge Working reaches up to m Scaffolding dimension: 1.90 x 2.45 m Load capacity: 1.5 kn/m 2 4 large swivel castors Ø 200 mm with locking device Precise height adjustment by spindles Roof, chimney, folding and mobile scaffolds, ladder platforms Ballast kg Use indoors Centre set-up Use outdoors Centre set-up n.z. Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. 14 Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 1.90 x x x x 2.45 Weight approx. kg

205 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Roof and chimney scaffolding made of aluminium The roof and chimney scaffoldings give you the safe support you may expect when working at heights. The stable weather-resistant modular construction is easy and straightforward to assemble and disassemble in accordance with the assembly and disassembly instructions. Additional advantage: the railings, struts and platform can also be used for mobile scaffoldings. The ladders can also be used individually for other purposes. Note: The extension unit (order no ) can only be used in connection with the basic unit (order no to ). Please follow the instructions for assembly and use. Technical overview: Load class/scaffolding group 2, 1.5 kn/m 2 Scaffolding dimension: 0.75 x 2.45 m Working reaches: 2.00 m or 4.00 m Optionally also available with a platform length of 1.80 m or 3.00 m (on request) Fig Basic units Straight ladder 4.20 m Straight ladder 4.70 m Straight ladder 5.80 m Straight ladder 7.00 m Counter-ladder 3.00 m Outside width 490 mm Rung connector Tensioning connector to secure the pair of ladders Wooden rests with screw connection Brackets for platform, adjustable Platform without trapdoor, 2.45 m Toe board, front side Toe board, long side Railing frame Longitudinal railing Extension unit Plug-on frame 2.00 m Platform with trapdoor, 2.45 m Toe board, front side Toe board, long side Diagonal brace Horizontal strut Support strut Fig with order no Roof, chimney, folding and mobile scaffolds, ladder platforms Basic units Extension unit Working reach up to approx. m Scaffolding height m Platform height m 2.00 Scaffolding dimensions m 0.75 x x x x x 2.45 Weight approx. kg

206 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Folding scaffolding made of aluminium If you do not want to do without the typical advantages of folding scaffoldings, but need to work on spacious platforms at a great height, you should read these two pages very attentively. These types of scaffolding offer you the ideal combination: assembly and disassembly of the base unit quickly, can be folded and fits through every standard door. The scope of delivery includes all parts which guarantee safe work at heights of up to approx m. Also available in the scaffolding length 2.45 m and 3.0 m. Price on request. Fig Technical overview: GS-tested Corresponds to BetrSichV Extension versions correspond to load close/scaffolding group 2, in accordance with DIN EN 1004 Load capacity: 1.5 kn/m 2 Foldable, with self-locking folding hinge 4 swivel castors Ø 125 mm with spindles and locking device When used with standard parts, can be extended for Working reaches up to m or m Scaffolding dimensions: 0.75 x 1.80 m / 1.35 x 1.80 m Roof, chimney, folding and mobile scaffolds, ladder platforms Fig with outrigger 14 Note: The number of ballast weights required depends on the structure, the location and scaffolding height. The set-up and usage instructions provide you with detailed information about this. Working reach up to approx. m Scaffolding height m Platform height m Scaffolding dimensions m 0.75x x x x x x x x x x1.80 Weight approx. kg

207 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Scaffolding dimensions 0.75 x 1.80 m Scaffolding dimensions 1.35 x 1.80 m Platform height m Platform height m Parts list Order no. Parts list Order no. Folding frame unit Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Triangular outrigger Swivel castor Ø 125 mm Step-on bracket Folding frame unit Plug-on frame 1.00 m Plug-on frame 2.00 m Railing frame 1.00 m Longitudinal railing Platform with trapdoor Platform without trapdoor Toe board, front side Toe board, long side Diagonal brace Horizontal strut Triangular outrigger Swivel castor Ø 125 mm Step-on bracket Ballast kg Use indoors Centre set-up Side set-up Use outdoors Centre set-up n.z. n.z. n.z. Side set-up n.z. n.z. n.z. Ballast kg Use indoors Centre set-up Side set-up Use outdoors Centre set-up n.z. n.z. n.z. n.z. Side set-up n.z. n.z. n.z. n.z. Choose between 3 scaffolding dimensions: 1800 mm 2450 mm 3000 mm Roof, chimney, folding and mobile scaffolds, ladder platforms *Outriggers not included in the standard scope of delivery for a platform height of 1.80 m and 2.80 m, since not required. *Outriggers not included in the standard scope of delivery for a platform height of 1.80 m, 2.80 m and 3.80 m, since not required x x x x x x x x x x x

208 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Ladder platform made of aluminium You can make a universally safe ascending aid from the ladder platform and 2 suitable ladders (1-part straight ladders) in no time. Platform with trapdoor. 2 people are needed to build the structure. Choose between 1.80 m, 2.45 m and 3.0 m platform length. The maximum working height is 7.0 m. The ladder platforms have been designed for wall-side application and are especially suitable for inside and outside work on roof, halls, façades etc. The ladders shown here are not included in the scope of delivery. IMPORTANT: Only straight ladders may be used that have an outer width of 420 mm, up to max. 20 rungs (Item no , , ). Technical overview: Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Load class/scaffolding group 2, payload 1.5 kn/m 2 Platform lengths: 1.80 m, 2.45 m or 3.00 m Max. working height 7.0 m Main components can also be used with mobile scaffoldings 14 Working height depends on the ladder length max m Platform length m Weight approx. kg

209 Roof, chimney, folding and mobile scaffolds, ladder platforms Mobile containers Individual scaffolding parts / accessories Longitudinal railing Plug-on frame For scaffolding dimensions 0.75 m. For scaffolding lengths m Weight kg Height m Weight kg Railing frame front side, 1.00 m Fig Plug-on frame For scaffolding dimensions 1.35 m. Fig For scaffolding lengths m Height m Weight kg Weight kg Railing frame front side For folding scaffolding extension unit. Fig Entry frame Fig Suitable for folding scaffoldings with order no Suitable for folding scaffoldings with order no Platform without trapdoor For scaffolding lengths m Weight kg Platform with trapdoor For scaffolding lengths m Weight kg Platform with trapdoor For mobile scaffolding with inclined ascents, top. For scaffolding length m Weight kg Fig Fig Fig Height m 2.00 Weight kg Plug-on frame For folding scaffolding with triple platform. Height m 2.00 Weight kg Aluminium toe board, long side For scaffolding lengths m Weight kg Aluminium toe board, front side For scaffolding widths m Weight kg Fig Fig Fig Roof, chimney, folding and mobile scaffolds, ladder platforms Folding frame unit For scaffolding lengths m Weight kg Fig Folding frame unit Suitable for folding scaffoldings with order no For scaffolding lengths m Weight kg Fig Fig Fig

210 Individual scaffolding parts / accessories Roof, chimney, folding and mobile scaffolds, ladder platforms Accessories Horizontal strut Inclined ascent, bottom For scaffolding lengths m Weight kg Fig Fig Diagonal brace For scaffolding lengths m Weight kg Inclined ascent For scaffolding lengths m Weight kg Fig Fig Triangular outrigger Fig For scaffolding lengths m Weight kg Spring-loaded clip for mobile scaffolding With short bolt Roof, chimney, folding and mobile scaffolds, ladder platforms Fig Fig Weight kg Handrail top For mobile scaffolding with inclined ascent. For scaffolding lengths m Weight kg Handrail For mobile scaffolding with inclined ascent. Fig Fig NEW! With long bolt Wall spacer bracket Adjustable up to 1.0 m. Weight kg Tray Incl. holder and attachment. Suitable for clamping range up to Ø 50 mm x 220 mm For scaffolding lengths m Weight kg x 300 mm Fig Fig

211 Roof, chimney, folding and mobile scaffolds, ladder platforms Accessories Individual scaffolding parts / accessories Height-adjustable spindle 300 mm, with foot plate. Support strut For roof/chimney scaffolding. See page 205 Weight kg Step-on bracket Fig Fig Rung connector Weight kg 2.1 Weight kg Fig Fig Swivel castor With parking brake and spindle for height adjustment (300 mm). Tensioning connector Ø mm Weight kg Fig Weight kg Fig Swivel castor With parking brake and pin. Ø mm Weight kg Ballast weight Weight kg Fig Fig Wooden rest Weight kg Counter-ladder 3.0 m Outside width 490 mm Fig Illustration similar Roof, chimney, folding and mobile scaffolds, ladder platforms Chassis bar Bracket 14 Fig Length m For chimney scaffolding Weight kg Weight kg * * incl. castors Fig Fig

212 SMART TIPS! KEY FEATURES OF OUR ACCESSORIES AND SPARE PARTS! Comprehensive selection of accessories Safe working in many fields of application For universal use on ladders from GÜNZBURGER STEIGTECHNIK More practical working in many fields of application. Spare parts Long-term availability Operational safety 15 year quality guarantee All products Made in Germany Accessories and spare parts years quality guarantee standard products 15 EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days. See page 227 for detailed information 212

213 ACCESSORIES AND SPARE PARTS Accessories in accordance with TRBS 2121 and German Social Accident Insurance (DGUV) information sheet (formerly BGI 694 or GUV-I 694) and applicable DGUV regulations. Modification and completion work, e.g.: Installation of castors, hooks, cross tubes, chains etc. for you at a flat-rate charge per modification. A comprehensive range of tried-and-trusted accessories will make your working equipment even safer and more practical to use. Even after many years, you will still be able to purchase the most frequently needed spare parts for all the products offered. The following pages will give you an overview. Hook-in platform Suitable for rung ladders. The hook-in platform is for all those who have to stand on the ladder for a longer period. It provides a safe and fatiguefree, safe stance and can be fastened easily if necessary. With powder-coated surface. Non-slip platform cover. Tray Suitable for rung ladders. Practical tray for paint, brush, screwdrivers etc. It is simply hooked into the ladder rungs at the respective height Bucket hook Suitable for edged step and rung ladders. Simple push into the rung opening, leaving you both hands free for safe work. Galvanised steel Hook-in platform, collapsed. Hook-in step Suitable for rung ladders. Made of chequered plate Tool tray Suitable for double-sided rung ladders. Practical and suitable tray for small parts and tools during work on the ladder. Load-bearing capability: 10 kg. Sturdy PVC (without contents). File holder Suitable for step ladders. Sturdy and practical holder for document files. To be hooked into the ladder step. Turns the ladder into a file holder and makes work easier in the office and warehouse. Anodised surface Accessories and spare parts

214 Accessories and spare parts Exit side-rail retractable For safe exit and entry of ladders. Useful length approx. 1.0 m. The ladder can be fully retracted when this is in the retracted position. Made of aluminium. Swivel base with rubber cover Ideal for use on grating and as a spare part. Suitable for ladders with side-rail width 25 mm incl. mounting material Fig Suitable for attachment to straight ladders. Attachment angled angled left right Gutter holder Suitable for all ladder side-rails. Secures the straight ladder safely to all sides without clamping the side-rail, providing safe hold when passing over to the roof. Suitable for attachment to push-up extension ladders. Attachment straight left straight right Fig Lashing strap For securing the ladder during use and transport. Length 1.0 m. Ridge bracket For straight ladders with rungs 30 x 30 mm. For quick repair work on roof and chimneys. The ridge bracket is fixed to the rungs of the straight ladders. Thanks to the wheels, the straight ladder can be rolled to the ridge, turned over and hung safely in place. Made of aluminium Accessories and spare parts Ladder suspension unit Lockable by padlocks provided by the customer. Galvanised steel. 1 set = 2 pcs. Ladder suspension hook Can be folded aside when not needed. Galvanised steel. 1 set = 2 pcs

215 Accessories and spare parts Side-rail extension Safe standing on uneven ground. Height-adjustable, can easily be fitted to the side-rail if necessary. Adjustment range max. 375 mm. For rectangular tube side-rails 58 mm mm mm mm Base widener Easy to attach with 4 screws. Non-slip and stable end caps. Length 1200 mm. For rectangular tube side-rails 58 to 98 mm. The ladders have to be secured against slipping Side-rail extension Gradually adjustable, max. 375 mm. Effortless mounting to stabiliser bars. Only for ladders with bar widths of 930 mm or 1200 mm. Fruit tree poles For attachment to straight and push-up extension ladders for safe standing for all tree work. Factory fitting at an extra charge. 1 set = 2 tube supports with screw connection (attachment to rungs), 2 belt straps (safety device), 1 set of ground spikes (for the ladder). Suitable for straight ladder and push-up extension ladder Suitable for straight ladder and push-up extension ladder Suitable for straight ladder and push-up extension ladder Wall spacer bracket Suitable for rung ladders. With tool tray. Max. wall clearance 68 cm, min. wall clearance 50 cm, adjustable every 3 cm. Transport lifting roller for step ladders For the lower ladder end. When closed, the step ladder can be easily moved by means of the lifting rollers with Ø 125 mm. 1 set = 2 pcs Accessories and spare parts

216 Accessories and spare parts Ground spikes According to applicable standards and regulations, ground spikes must be used on natural ground. Suitable for ladders up to model year 2004 or ladders without nivello ladder shoe: Steel spikes with plate, universally suitable from side-rail height 50 x 25 mm to 98 x 25 mm. Ground spikes Suitable for ladders from model year 2005 with nivello ladder shoe Steel spikes, universally suitable from side-rail height 50 x 25 mm to 98 x 25 mm Roll-top For shelf ladders. 2 pieces required. Rigid connection Can be released at one side. Please indicate ladder order no. Complete with fastening material (bolt, spring, sleeve) Accessories and spare parts 15 Spring-mounted castor for step ladders Spring-mounted castor for lower end of the ladder Ø 80 mm. 4 pieces are required for step ladders: 2x right, 2x left. Spring-mounted castor right Spring-mounted castor left Ø 50 mm Alternatively rotatable by 360 Spring-loaded swivel castor right Spring-loaded swivel castor left Ladder rack Wall clearance 160 mm, Outside width 475 mm, Tube Ø 25 mm. Galvanised steel Perforated rung Depth of tread 29 mm, hole Ø 6 mm (only available in the lengths shown). Designs: Bright steel, stainless steel Length mm Material Order no. 300 Bright steel Stainless steel Bright steel Stainless steel Bright steel Stainless steel

217 Accessories and spare parts Chain restraint Knotted-link chain restraint for step ladders instead of nylon straps. Length 2.0 m, 1 chain with 2 fasteners Hook for rung ladders, step ladders and wide rung ladders Lay-on hook for guide rail up to Ø 36 mm up to Ø 50 mm up to Ø 80 mm Hook for special ladders Link chain restraint for step ladders instead of nylon straps. Length 2.00 m, 1 chain with 2 fasteners Spreader lock For rung step ladders made of aluminium and rung multi-purpose ladders made of aluminium. Please indicate ladder order no.1 high-strength nylon belt Lay-on hook, reinforced fibre glass coated Hook for special ladders round up to 50 mm round up to 100 mm round up to 150 mm round up to 200 mm Lay-on hook, reinforced fibre glass coated Angled up to 50 mm Angled up to 100 mm Angled up to 150 mm Angled up to 200 mm ergo-pad grip area Ergonomically shaped grip area for easy and convenient handling of our step ladders. For aluminium single-sided step ladders (including relax step ), double-sided step ladders and straight step ladders (including relax step ) from GÜNZBURGER STEIGTECHNIK. suitable for Fig Fig Fig Accessories and spare parts

218 Accessories and spare parts NEW! Wall-mounted ladder holder XL For the space-saving storage of ladders on the wall. Suitable for all double-sided step ladders (also ML step ladder) and all rung step ladders with a side rail height 73 mm and for ladders with the order no , 30408, , , , , , , , , , , , , , 50006, 50007, , Weight approx. kg Wall-mounted ladder holder L For the space-saving storage of ladders on the wall. Suitable for all single-sided step ladders (including step ML) and all rung step ladders with side-rail height 58 mm as well as for folding platforms with order no and Weight approx. kg Fig Ladder holder Accessories and spare parts Version in galvanised steel plate, then powder-coated in RAL 3000 red, for wall mounting. Gradually adjustable depth from mm. Dimensions approx. mm 150 x 96 x Weight approx. kg 1.00 Weight approx. kg 1.00 for on-site profile half-cylinder including CL1 lock Fig Fig

219 Accessories and spare parts Retrofit stabiliser bars according to amendment DIN EN NEW! Retrofit stabiliser bar length 0.93 m * Fig Version for side-bar 58 mm for side-bar 73 mm Fig Retrofit stabiliser bar length 1.20 m * Fig Fig Version for side-bar 73 mm for side-bar 85 mm for side-bar 98 mm Fig Retrofit stabiliser bar with nivello length 0.93 m * Fig Version for side-bar 58 mm for side-bar 73 mm Fig Retrofit stabiliser bar with nivello length 1.20 m * Fig Fig Version for side-bar 73 mm for side-bar 85 mm Retrofit stabiliser bar for straight ladders made of wood length 0.93 m * for side-bar 98 mm Fig Accessories and spare parts 15 Version for side-bar 70 mm * incl. attachment material 219

220 Fig. Step ladder order no with retrofit kit for order no Fig. Step ladder order no with retrofit kit for order no Retrofit kit step padding clip-step Accessories and spare parts Live up to the increased requirements on work safety and provide for optimised non-slip property, safe step and comfortable standing on our step ladders. The step padding made of grooved plastic is clipped onto the step to cover the whole surface and is custom-fit. It can be removed again without damage to the ladder and leaving no residue. According to DIN EN 131, the step padding clip-step is applied up to the max. accessible step in the case of step ladders accessible from both sides, thus functioning as an optical check for correct use of the ladder. Simple attachment with just one click Take at look at the product video for clip-step and clip-step R 13 step padding on YouTube now. Aluminium step ladder single-sided ladder retrofit kit Aluminium step ladder double-sided with castors ladder retrofit kit Aluminium step ladder double-sided Reinforced fibre glass step ladder Aluminium step ladder with large standing platform Aluminium step ladder with castors and handle, with large standing platform and tray Accessories and spare parts 15 Aluminium step ladder single-sided with castors Straight ladder made of aluminium Movable platform ladder made of aluminium ML Step ladder made of aluminium single-sided ML Step ladder made of aluminium double-sided Bulk item 1400 mm Only suitable for ladders from GÜNZBERGER STEIGTECHNIK. 220

221 Accessories and spare parts Retrofit kit R 13 step padding clip-step The new clip-step R 13 step padding is a certified, non-slip covering for our step ladders. With its synthetic material profile including its aluminium oxide particles, the step padding clipstep R 13 meets the specifications of classification group R 13 and was classified with V6 for the displacement space in this classification group. The step padding clip-step R 13 provides additional increase of workplace safety, particularly in wet or oil-contaminated work environment. The clip-step R 13 step padding is clipped onto the step to cover the whole surface and is custom-fit. It can be removed again without damage to the ladder and leaving no residue. According to DIN EN 131, the step padding clip-step is applied up to the max. accessible step in the case of step ladders accessible from both sides, thus functioning as an optical check for correct use of the ladder. Fig. Step ladder order no with retrofit kit for order no Simple attachment with just one click Fig. Step ladder order no with retrofit kit for order no Aluminium step ladder single-sided ladder retrofit kit Aluminium step ladder double-sided with castors ladder retrofit kit Aluminium step ladder double-sided Reinforced fibre glass step ladder Aluminium step ladder with large standing platform Aluminium step ladder with castors and handle, with large standing platform and tray Aluminium step ladder single-sided with castors Straight ladder made of aluminium Movable platform ladder made of aluminium ML Step ladder made of aluminium single-sided ML Step ladder made of aluminium double-sided Bulk item 1400 mm Accessories and spare parts 15 Only suitable for ladders from GÜNZBERGER STEIGTECHNIK. 221

222 Accessories and spare parts nivello inside shoe For ladders from model year 2005, for rung and step ladders made of aluminium. 58 x x x x Fig Fig Fig Side-rail dimensions Inside shoe For ladders up to model year 2004, for rung and step ladders made of aluminium. 58 x x x x For rung and step ladders made of aluminium, electrically conductive. 58 x x x x x 20 mm 50 x 20 mm 30 x 20 mm For folding steps made of aluminium order no , Support section 50 x Ascent 30 x For steel shelf ladders, grey. 50 x x For steel shelf ladder, black, electrically conductive. 50 x For platform ladders. 59 x Fig For platform ladders, electrically conductive 59 x For step ladders ML made of aluminium 35 x For rigid working platforms made of steel. Ø 25 mm Fig For rigid working platforms made of steel, electrically conductive. Ø 25 mm For step ladders ML made of aluminium, left Accessories and spare parts Fig For ladders made of solid reinforced fibre glass. 73 x x Inside shoe For step ladders ML made of aluminium, right Castor x 20 mm Inside shoe, front, for ML compact step stools 34 x For push-up extension ladders, ropeoperated extension ladders, multi-purpose ladders, window cleaner's ladders. 68 x 20 mm Inside shoe, rear, for ML compact step stools 68 x For aluminium ladders

223 Accessories and spare parts Outside shoe Wheel axle For multi-purpose ladders For cross-tube 58 x x For rigid working platforms made of aluminium order no , 50031, Side-rail dimensions Fig For push-up and rope-operated extension ladders, 2-section For rope-operated extension ladders, 3-section Pleaseindicate the ladder order no. Rope pulley Fig Ø 30 mm Electrically conductive for rigid aluminium working platforms , 50031, Side-rail dimensions Ø 30 mm For 2- and 3-section rope-operated extension ladders Fig Wall pad For window cleaner's ladders For telescopic ladders order no , 32015, 32017, Outside shoe Inside shoe Rung sliding piece Fig Corner strut* Rung step ladders made of aluminium Step ladders made of aluminium Step spare parts set For step ladders ML Comprising: 4 screws 2 step brackets 1 step Fig Please indicate step length on order Spring-mounted castor For platform ladders. Castor with axle and spring. Please indicate the order no. of platform ladders. Pull-out stop Spring-mounted castor with locking device Spring-mounted castor without locking device Electrically conductive with locking device Electrically conductive without locking device Spring-mounted castor * For shelf ladders. Left Fig Fig Transport safeguard plate * Right Accessories and spare parts 15 For rung ladders made of aluminium * incl. attachment material For rung and step ladders made of aluminium. 58 x 25 mm x 25 mm Fig

224 Accessories and spare parts Side-rail cover cap Tray * 50 x 20 mm 30 x 20 mm For step ladders made of aluminium. 58 x 25 mm 61 x 25.6 mm 50 x 20 mm x 20 mm x 25 mm x 25.6 mm For step ladders made of aluminium, single-sided. 73 x 26 mm 73 x 26 mm Side-rail cover cap Tray * For aluminium step ladders with new ladder shoe from model year x 25 mm x 25 mm x 25 mm For folding steps made of aluminium. Fig x 25 mm Stabiliser, complete * Tray * Please indicate the ladder order no. or length, bore hole spacing and height of cross-tube. For ladders up to model year With nivello, for ladders from model year Hinge * For step ladders ML made of aluminium Guide fixture, top * For push-up, rope-operated ladders (multi-purpose ladder, cranked, without number). Please specify the ladder type. For rung step ladders made of aluminium. 73 x 25 mm x 25 mm Hinge * Fig x 25 mm Guide fixture, bottom * Accessories and spare parts For ladders made of solid reinforced fibre glass. 73 x 25 mm Hinge * Fig For 2-section rope-operated extension ladders. Please specify the ladder type. 73 x 25 mm x 25 mm x 25 mm Insertion hook * 15 For rung push-up extension ladders made of aluminium and rung multipurpose ladders made of aluminium. For rung step ladders made of wood Insertion hook without lift lock Insertion hook with lift lock Without lift lock With lift lock When ordering spare parts, please indicate the article number of the ladder you have. 224 * incl. attachment material

225 Accessories and spare parts Automatic steel hinge * Locking hook, complete Multi-function ladder Outer hinge Multi-function ladder Centre hinge Folding ladders Scaffolding folding frame Telescopic ladders On request¹ ¹Please indicate the telescopic ladder order no. Product stickers Control sheet for periodic tests Climbing equipment must be checked recurrently, depending on the operating conditions, influences of the environment, load and frequency of use. For standard-conform testing we offer control sheets in accordance with BetrSichV, TRBS, DGUV Information (formerly BGI 694 and GUV-I 694) for ladders and DGUV Information (formerly BGI/GUV-I 663) for mobile scaffolding as well as DGUV Information (formerly BGI/GUV-I 5189) for vertical ladders, all of which can be downloaded for free. Download from de. Operating instructions 73 x 25 mm x 25 mm x 25 mm Fig Fig Product-specific operating instructions must be affixed according to DIN EN Explanation of the pictograms used are found at For 2-section rung rope-operated extension ladders made of aluminium. Operating instructions for straight ladders (1 packaging unit = 20 pcs.) Operating instructions for multi-purpose ladders (1 packaging unit = 20 pcs.) Operating instructions for single-sided step ladders (1 packaging unit = 20 pcs.) Operating instructions for double-sided step ladders (1 packaging unit = 20 pcs.) Operating instructions for step ladders made of steel-wood (1 packaging unit = 20 pcs.) Operating instructions for multi-function ladders (1 packaging unit = 20 pcs.) Operating instructions for rung step ladders (1 packaging unit = 20 pcs.) Operating instructions for push-up ladders (1 packaging unit = 20 pcs.) Operating instructions for rope-operated extension ladders (1 packaging unit = 20 pcs.) Operating instructions for straight step ladders (1 packaging unit = 20 pcs.) Operating instructions for step stools/platforms without holding device/handrail (1 packaging unit = 20 pcs.) Operating instructions for step stools/platforms with holding device/handrail (1 packaging unit = 20 pcs.) Ladder marking Individual ladder marking on 8 differently coloured stickers (according to RAL). You can have us print your individual logo and/or lettering and have the sticker affixed to your ladders. The stickers are 200 x 45 mm in size and fit in the side-rail spacing between the rungs or steps. RAL colour Test badge The test badge is located on the sticker with the order number when the ladder is delivered. Please use this test badge for all later recurring tests. Deviations in colour are possible due to the printing process. Accessories and spare parts Size 40 x 40 mm. * incl. attachment material 225

226 SMART TIPS! KEY FEATURES OF OUR SERVICE! Advisory service Competent Qualified In accordance with the latest technical standard Labelling for maximum product information Colour coding Instructions Warning stickers Documents for periodic tests Comprehensive check sheets Test badges Repair manuals Standards Completely up-to-date standards thanks to our active involvement in standards committees Core changes visualised quickly and simply Legal certainty thanks to information about the latest technical standard Service Seminars Alphabetic search list 16 EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days. See page 227 for detailed information Practical seminars Training to become a person competent for checking ladders, step stools, small scaffolding and mobile scaffolding, one-day seminar with certificate Also in-house on request. 226

227 Information Product tests Almost all our products are type and GS-tested. The following institutes conduct the tests at our company: TÜVRheinland, TÜV Product Service, BG-PRÜFZERT, DEKRA, DEKRA EXAM, Intertek Deutschland. Welding verification Certification by GSI SLV in compliance with EN and EN to EXC 2 and DIN EN ISO * Made in Germany * TÜV seal "Made In Germany : all the products made in Günzburg are marked with this. years quality guarantee standard products Guarantee conditions We select the best materials and suitable manufacturing processes for our products. Our company has been awarded certification according to European standard DIN EN ISO 9001:2008 and has an operational quality assurance management. We can therefore grant you a 15-year guarantee for our series products. The guarantee does not cover motor drives or additional electrical, hydraulic or pneumatic equipment or its supply lines the legal regulation applies here. The guarantee takes effect on the purchase date. Invoices or receipts serve as evidence of this. The guarantee covers material, production or design defects which can be attributed to us. Damage caused by natural wear, improper usage or changes are not covered by the guarantee. In the case of a guarantee claim, we will make improvements or provide a replacement at our own discretion. Any further claims are excluded. Express delivery The company GÜNZBURGER STEIGTECHNIK attaches great importance to ensuring that the items listed in the Steigtechnik Guidebook are available very quickly and that most products are on stock at the Günzburg works. Speed is often the decisive factor, not only for you, but for us as well. We are your reliable delivery partner! Our three categories in the express delivery program. EXPRESS DELIVERY 1-3 Available for delivery within 1 3 working days ex Günzburg works. EXPRESS DELIVERY 3-5 Available for delivery within 3 5 working days ex Günzburg works. EXPRESS DELIVERY 10 Available for delivery within 10 working days ex Günzburg works. Express shipping: Available at favourable conditions for a small surcharge. Just contact us! The deadlines stated for the express delivery program apply for the Federal Republic of Germany. All orders and deliveries are subject too the General Terms and Conditions of the company GÜNZBURGER STEIGTECHNIK that are known to the buyer (see also ) and can be handed over on request. The company GÜNZBURGER STEIGTECHNIK reserves the right to select the shipping method. He above-mentioned delivery deadlines are non-binding and do not represent a legally binding delivery date. Service Seminars Alphabetic search list

228 What you should certainly know! Selection of the right ladder length and scaffolding height Our column "What you should certainly know" contains articles stating facts that everyone should know who uses ladders steps, scaffolding or similar For safe use. This information is also available online on our website. Which ladder size/length is required? EU Directive 2009/104/EC (formerly 2001/45/EC) includes the requirement that users be able to stand safely and hold themselves safely at all times. (Implemented in Germany through the BetrSichV.) 4 Stop Straight ladders may only be ascended up to the fourth step/rung from the top. The so-called elbow method is used to determine the correct leaning angle. 3 Stop Double-sided step ladders may only be ascended up to the third step/rung from the top. 5 Stop Multi-purpose ladders in position of use Straight ladders with push-up extension may only be ascended up to the fifth rung from the top. Service Seminars Alphabetic search list Straight ladders with platform and platform ladders must be selected in such a way that the user can reach the maximum working height required from the platform without having to stretch

229 Illustration of standing height and working height The choice of the right ladder/scaffolding always depends n the circumstances and the working height required. Equation * Standing height m = approx. working height * Depending on person's height Standing height Working height Standing height Working height Standing height Working height Calculation of ladder length with vertical height known Required minimum ladder length (in m) at the following work angle 75 rung ladders (only just within the allowed tolerance) 70 Rung ladders (Our recommendation) 70 Step ladders 60 Stairways 45 Stairways verti. Height (in m) verti. H F * verti. H F * verti. H F * verti. H F * verti. H F * * Height x Factor X The required minimum lengths can be read from the table. We always recommend selecting the next largest overall length from our delivery range. Example of how to calculate the minimum ladder length: Vertical height (upper contact point) = 6.0 m If a rung ladder is used: (70 inclination angle) 6.0 m x = 6.40m The values are rounded to 5 cm. Elbow method A straight ladder that is positioned too steeply can fall over. If it is too flat, it might slip away. Use the elbow method to select the correct inclination angle. Service Seminars Alphabetic search list

230 What you should certainly know! Standards, laws and regulations Standards are recognised engineering rules that define the production, testing and use of products. The application of these standards becomes mandatory, if specified in private contracts or in laws, such as the German Product Safety Act (ProdSG). It is obvious from the German Work Safety Act (ArbSchG) and the DGUV regulations that the respective standards need to be satisfied when using climbing equipment. Portable ladders Applicable standards DIN EN to 4 The standard describes and is applicable for... portable ladders for a whole range of different purposes e.g. straight ladders, push-up extension ladders, step ladders, multi-purpose and hinged ladders for use by 1 person with a weight of max. 150 kg. Step stools DIN EN portable ascents with one or more steps where the top surface must not be higher than 1.0 m, and is designed for use by 1 person with a weight of max. 150 kg. Platform ladders Steps, working platforms and walkways DIN EN DIN EN ISO to 4 mobile platform ladders with a working platform of max. 1 m2 in area, a platform height of max m and for use by 1 person with a weight of max. 150 kg. stationary access to machinery e.g. ramps, steps, parapet bridges, railings, working platforms, walkways and vertical ladders. The standard does not apply for ladders for specific professional use, such as fire-fighting ladders, roof ladders, as well as step stools. ladders such as single-sided or double-sided step ladders. portable ladders according to EN or -4, ladders according to EN 1147, step stools according to EN 14183, stationary access according to EN ISO lifts, mobile lifting platforms or other equipment designed for transporting persons between two levels. Vertical ladders DIN to 2 stationary vertical ladders on buildings with side-rails or centrerail. Fall protection depends on the overall vertical height and person subgroup; back protection or fall stop required. stationary vertical ladders as emergency ladders or access to machinery. Vertical ladders DIN stationary vertical ladders with side-rails, with and without back protection as an emergency ladder system. stationary vertical ladders as passages on buildings or access to machinery. Service Seminars Alphabetic search list Mobile scaffoldings DIN EN 1004 mobile working platforms made of pre-fabricated components with a height of 2.50 m to m (within buildings) and from 2.50 m to 8.00 m (outside buildings). small scaffoldings, façade or protective scaffoldings. If you have any questions about standards or regulations in the field of climbing equipment, please do not hesitate to contact the experts at GÜNZBURGER STEIGTECHNIK

231 One-day seminar Seminar Fit for access solutions Are you fit on the subject of access solutions? Do you know whether ladders can still be used or repaired? Do you know which step of a step ladder you can climb up to? We will get you and your employees fit for access solutions! Seminar starts 8 a.m. Seminar ends 4 p.m. Our seminars Training to become a person competent for checking ladders, step stools, small scaffolding and mobile scaffolding are recognised by the VDSI e.v. and are evaluated with two training points. This makes them suitable as further training for health and safety specialists in accordance with 5 sect. 3 ASiG (German Occupational Health Act) and DGUV regulation 2. Training to become a person competent for checking ladders, step stools, small scaffolding and mobile scaffolding The Ordinance on Industrial Safety and Health (BetrSichV), TRBS, DGUV Information or (previously BGI 694 or GUV-I 694) for ladders and DGUV Information (previously BGI/GUV-I 663) mobile scaffolding, demand that the employer has to ensure that working equipment which are subject to influences which cause damage and can lead to hazards for employees are recurrently checked for their proper condition by a person competent to carry out such checks. GÜNZBURGER STEIGTECHNIK offers you the possibility, within the scope of a one-day seminar, to impart necessary knowledge to your employees in theory and practice several times a year and at different German locations but also for larger groups (from 10 persons on). The training contents are oriented towards the current standards and regulations and they are very practically oriented and not manufacturer-specific. Besides the topics ladders and step stools, small scaffolds and mobile scaffolding are also focal points of the seminar. The participants receive a folder containing training documents as well as a certificate. Around people have taken part in these seminars over the past 18 years. For further information about dates and venues call: Phone +49 (0) / or visit Look forward to experienced and practice-oriented trainers Learn on the basis of numerous examples and demonstration samples Benefit afterwards as well from comprehensive seminar material We also carry out company-specific events (from 10 persons on) Service Seminars Alphabetic search list

232 NEW! Individual custommade designs PRODUCT HIGHLIGHTS Innovative brake system High-strength aluminium special screw channel profiles Ergonomic design High-quality materials 15 year quality guarantee "Made in Germany" certified Handle bar with "SoftGrip" Transport logistics Mobile containers We develop and manufacture the mobile container that exactly matches your wishes. Contact us: Service Seminars Alphabetic search list 16 For more information, take a look at our brochure Mobile containers for transport logistics or visit our website Professional and premium transport logistics for demanding use in industry Our mobile containers meet the high demands of industry. We are setting the new benchmark regarding transport logistics characterised by excellent workmanship, first-class material quality, top-quality equipment and sophisticated design. Convince yourself with our comprehensive standard range of products and a lot of innovative product details. Mobile container versions are also available in custom-made special designs. We can draw on years of extensive experience and continuous further development in the area of rescue technology. Our professional mobile containers have been timetested and proven time and again during tough rescue operations in the most adverse of conditions. Ideal employment of the systems in industry, in workshops, kanban systems and manufacturing locations. 232

233 Intelligent solutions Made in Germany GÜNZBURGER STEIGTECHNIK * n-tv familienfreundlichkeit im handwerk 2016 Iron 2016 CSR Award powered by BHB GÜNZBURGER STEIGTECHNIK is considered the top name for ladders, mobile scaffolding and specialised structures well beyond Europe. Not least because you get a quality guarantee of 15 years on our products. Access equipment made in Günzburg has a tradition going back more than 120 years. Today, the company is being managed by the fourth generation of the founding family. With a staff of around 250 committed employees, GÜNZBURGER STEIGTECHNIK develops and produces intelligent solutions. CSR-Rating in Silver 2017 It is no coincidence that our motto is Steigtechnik mit Grips, which means "Climb smart. But what exactly do we mean by that? Quite simply: Intelligent products and product details with practical added value for our customers. Right from the beginning, it has been especially important to us that production takes place exclusively at our corporate headquarters in the Bavarian town of Günzburg. The outcome of this down-to-earth company policy is a unique promise: 15 years quality guarantee will always give the good and safe feeling of having decided in favour of the right product with GÜNZBURGER STEIGTECHNIK. So for us, production at the home location is at once a quality feature and a philosophy and we also rank among the pioneers in this regard: We are the first company whose products have been certified by the Technical Inspection Association TÜV Nord with the quality seal "Made in Germany". The solutions provided by GÜNZBERGER STEIGTECHNIK are employed in numerous fields: in industry and trade, by public clients and of course by the private sector. Our series product range includes more than 1600 products. Service Seminars Alphabetic search list 16 * TÜV seal Made In Germany : all the products made in Günzburg are marked with this. 233