Series 1300A. product guide. contents. features. All New Design. Features ft (33.52 m) Four-Section Boom. Mounting Configurations 3

Transcription

1 Series 13 product guide features ll New esign 11 ft (33.52 m) Four-Section oom 3 USt (27.2 t) Rating Self-lubricating Easy Glide Wear Pads Internal nti-two-block NEW VISION contents Features 2 Mounting onfigurations 3 Specifications 4 apacities 5 ccessories 1 imensions Specifications 11 *Product may be shown with optional equipment.

2 features Why uy a National rane Series 13? 13 2 *Product may be shown with optional equipment. 3 USt (27.2 t) maximum capacity 163 ft (49.6 m) w/optional jib maximum vertical reach* 119 ft (36.27 m) maximum vertical hydraulic reach* Load Moment Indicator system (LMI) with WS Proportional boom extension High performance planetary winch Heavy-duty triple pump hydraulics * Maximum vertical reach is ground-level to boom tip height at maximum extension and angle with outriggers/stabilizers fully extended. 3 USt Rating (27.2 t) The new 13 is a 3 USt machine and has increased capacities over the former Series 13 model. 11 ft (33.52 m) Four-section oom The longest in its size range. The longer boom allows the operator to perform more lifts without the use of a jib, reducing setup time and improving efficiency. ft (21 m) four-section boom or a 1 ft (3.5 m) four-section boom is also available. Overload Protection ll National rane boom trucks are equipped with overload protection: Load Moment Indicator (LMI) is standard on all series 13 machines. LMI with WS (Working rea efinition System) display console is weatherproof. L display is visible in full or low light. ll crane load lifting values are displayed simultaneously. Self-lubricating Easy Glide oom Wear Pads The self-lubricating boom pads, standard on the 13, reduce the conditions that cause boom chatter and vibration. The net result is smoother crane operation. HO -style Outriggers Two sets of HO -style outriggers with 2 ft (6.9 m) span, with 14 ft (4.27 m) mid span setting with manual locks and reduced capacity chart and fully retracted outrigger spread with reduced capacity chart. Outriggers are equipped with removable ball and socket aluminum foot pads. Independent outrigger controls (umbilical design) are located at rear of the crane and includes level indicator (sight bubble). ontinuous Rotation/Glide Swing The series 13 is supplied with 3 continuous rotation as standard, along with the glide swing feature - allowing free swing during rotation - and a manually applied foot brake. djustable Swing Speed Standard on the 13. control knob located on the swing motor brake release valve can be easily adjusted to the crane operator s swing speed preference. Oil ooler Radiator mounted on top of front outriggers with electric fan is standard. Heavier-duty Torsion ox The stronger standard torsion box improves rigidity, reduces truck frame flex and reduces the need for turret mounted counterweight. Speedy-reeve oom Tip and Sheave locks These standard features simplify rigging changes by decreasing the time needed to change line reeving. Electronic versions of manuals available through Manitowoc rane RE. Pre-painted omponents Painting crane components before assembly reduces the possibility of rust, improves serviceability and enhances the appearance of the machine. eluxe Operator s ab NEW VISION has a rigid powder coated steel structure, is well insulated, with ample safety glass for operator visibility and comfort. Multi-position seat with arm rest and single axis joystick controls, ventilation fans, diesel heater, wipers. Optional air conditioning is available. Optional open-seat control station in lieu of enclosed cab is available. Improved Serviceability earings on the boom extend and retract cables can be greased through access holes in the boom side plates. Number of internal boom parts has been reduced, decreasing service time when rebuilding the machine. New State-of-the-art ontrol Valve Provides smoother operation. The new design eliminates parts, reducing repair costs and improving the machine s serviceability. National rane is the Market Leader National rane is number one in the production of commercial truck-mounted boom trucks, with more than, units sold. National rane has many programs and people directly and indirectly involved to provide our customers with reliable products. National rane has the boom truck industry s leading test program. Every structural part of the crane is cycle tested up to, cycles at full capacity. In addition to cycle testing, each model is subjected to state-of-the-art strain gauge testing that measures metal deformation as small as one one-millionth of an inch. The net result is that any weak areas are caught in test, not on job sites where costly downtime occurs. Lift and telescoping cylinders are manufactured by National rane, so that the seals, packing glands, and end plates are traced for accurate shipment of replacement parts. Parts are available for all National rane machines for the life of the crane. National rane has a formalized quality program and is ISO 91 approved. National rane s Quality Management System is ISO 91:2 pproved.

3 mounting configuration 3 The mounting configuration shown is based on an 5% stability factor. The complete unit must be installed on the truck in accordance with factory requirements, and a test performed to determine actual stability and counterweight requirements, since individual truck chassis vary. If bare truck weights are not met, counterweight will be required. summary of mounting and truck requirements are: Working area 3 Gross xle Weight Rating (GWR), front 1, lb ( 1 kg) Gross xle Weight Rating (GWR), rear 34, lb ( 4 kg) Gross Vehicle Weight Rating 52, lb (23 7 kg) Wheelbase (W) in (6. m) ab to xle/trunnion (T) 192 in (477mm); fter Frame (F) in (27mm) minimum Frame Section Modulus (SM), front axle to end of afterframe: 11, psi (9 MPa) 2 in3 (327-cm3) See Truck Frame Strength section. Estimated bare chassis weight required for stability prior to installation of crane or accessories: Front 9, lb (42 kg) Rear,5 lb (3 kg)* 1, lb (36 kg) with optional bed Front xle Maximum Weight** 1,5 lb (4763 kg) *1, lb (36 kg) is required at the rear axle for 3 stability. This weight does include the weight of the optional bed. ounterweight will be required above the 5 lb (3 kg) minimum bare chassis if the optional bed is not used to attain the 1, lb (36 kg) stability weight. **Weight in excess of 1,5 lb (4763 kg) will require the addition of a front stabilizer or additional rear axle stability weight for over front stability. One-half of the front axle weight in excess of the maximum at the rear axle will maintain stability. Example: 11, lb (499 kg) are Front xle will maintain stability if the rear axle bare is lb (39 kg) and 1, lb (49 kg) with the additional optional bed weight. *** single front stabilizer is not necessary for 3 stability if mounting dimensions are maintained and minimum rear axle and maximum front axle weights are not exceeded. NOTE 1: Gross Vehicle Weight Rating (GVWR) is dependent on all components of the vehicle (axles, tires, springs, frame, etc.) meeting manufacturers recommendations; always specify GVWR when purchasing trucks. NOTE 2: NOTE 3: NOTE 4: NOTE 5: iesel engines require a variable speed governor and energize-to-run fuel solenoid for smooth crane operation; electronic fuel injection is required. ll mounting data is based on a National Series 13 with subbase and an 5% stability factor. The complete unit must be installed in accordance with factory requirements, and a test performed to determine actual stability and counterweight requirements; contact the factory for details. Transmission neutral safety interlock switch is required. 13

4 specifications 4 oom and Jib ombinations ata vailable in three basic models. Model 13 Equipped with a 22- ft ( m) four-section boom. Maximum tip height is 7 ft (23.77 m). 22- ft ( m) four-section boom. Model 131 Equipped with a -1 ft ( m) four-section boom. This model can be equipped with a - ft ( m) two section jib. Maximum tip height w/ft (13.41 m) jib is 3 ft (.63 m). -1 ft ( m) four-section boom. 13FJM - ft ( m) two-section jib Model 1311 Equipped with a ft ( m) four-section boom. This model can be equipped with a - ft ( m) two-section jib. Maximum tip height w/ft (13.41 m) jib is 163 ft (49.6 m) ft ( m) four-section boom. 13FJM - ft ( m) two-section jib Note: Maximum tip height is measured with outriggers/stabilizers fully extended. 13 Winch ata o not deadhead line block against boom tip when extending boom. Keep at least 3 wraps of loadline on drum at all times. Use only 9/16 in diameter rotationresistant cable with 3,5 lb breaking strength on this machine. 1 Part Line 2 Part Line 3 Part Line 4 Part Line 5 Part Line 6 Part Line 7 Part Line MXIMUM LENGTH T MXIMUM ELEVTION WITH RIGGING SHOWN 1 ft boom / jib 1 ft ft ft 5 ft 43 ft 36 ft WITH LO LOK T GROUN LEVEL 11 ft boom / jib 11 ft 94 ft 7 ft ft ft 32 ft verage able reaking Lift and Lift and Lift and Lift and Lift and Lift and Lift and Winch Supplied Strength Speed Speed Speed Speed Speed Speed Speed Standard 9/16 in iameter Planetary Rotation 3,5 lb 7,7 lb (3493 kg),4 lb (6 kg) 23,1 lb (1 47 kg) 3, lb (13 9 kg) 3,5 lb (17 4 kg) 4 lb (2 9 kg) 53,9 lb (24 9 kg) Winch Resistant (17 4 kg) 1 fpm (5 m/min) 2 fpm ( m/min) fpm (16 m/min) 41 fpm (12 m/min) 33 fpm (1 m/min) 27 fpm ( m/min) 23 fpm (7 m/min) urst 9/16 in iameter of Rotation 3,5 lb 3, lb (1361 kg) 6, lb (22 kg) 9, lb (43 kg) 12, lb (53 kg), lb (64 kg) 1, lb ( 1 kg) 21, lb (9 526 kg) Speed Resistant (17 4 kg) 2 fpm (111 m/min) 132 fpm (4 m/min) fpm (27 m/min) fpm (2 m/min) 53 fpm (16 m/min) fpm (13 m/min) 3 fpm (11 m/min) 13 ll winch pulls and speeds in this chart are shown on the fourth layer. Winch line pulls would increase on the first, second and third layers. Winch line speed would decrease on the first, second and third layers. Winch line pulls may be limited by the winch capacity or the NSI 5 to 1 cable safety factor. These are shown below: Winch 4th Layer rum Pull llowable able Pull Standard planetary 7,7 lb (3493 kg) (low speed) 7,7 lb (3492 kg) 3, lb (1361 kg) ( burst of speed ) lock Type Rating Weight ownhaul Weight 5 USt (4.53t) lb (6 kg) 1 Sheave lock 12 USt (1.9t) lb (139 kg) 2 Sheave lock 19 USt (17.24t) lb (9 kg) 3 Sheave lock 3 USt (27.22t) 5 lb (261 kg)

5 capacities Load hart Rating: Series 13 (21 m) oom / Full-Span Outrigger 2 ft (6. m) National rane will send you a chart on request or you may secure needed load rating information through your nearest National rane dealer. LENGTH IN FEET Operating radius from /L rotation IN FEET with unloaded boom HEIGHT IN FEET UTION: o not operate crane booms, jib extensions, any accessories or loads within 1 ft (3m) of live power lines or other conductors of electricity. Jib and boom capacities shown are maximum for each section. o not exceed capacities at reduced radii. Load ratings shown on the appropriate charts are maximum allowable loads with the crane mounted on a factory-approved truck and all outriggers at either full span or at mid span range and set on a firm level surface so that the crane is level and all tires are suspended. lways level the crane with the level indicator located on the crane. The operator must reduce load to allow for factors such as wind, ground conditions, operating speeds and their effects on freely suspended loads. Overloading this crane may cause structural collapse or instability. Weights on any accessories attached to the boom or loadline must be deducted from the load chart capacities. o not exceed jib capabilities at any reduced boom lengths. o not deadhead lineblock against boom tip when extending boom or winching up. Keep at least three wraps of loadline on drum at all times. Use only specified cable with this machine. 5 SERIES 13 NO JI / FULL-SPN OUTRIGGER 2 ft LOLINE EQUIPMENT EUT ownhaul weight... lb (6 kg) One sheave block...2 lb (12 kg) Two sheave block... lb (9 kg) Three sheave block...5 lb (261 kg) Load hart Rating: Series 13 (21 m) oom / Full-Span Outrigger 2 ft (6. m) 22 ft ft ( M) RTE LOS WITHOUT JI ft *, 47,5 4,3 34,9 2, ft 33,5 33,1 32,7 27,3 21,2 16, 13,3,5 *SHE RES RE STRUTURLLY LIMITE PITIES ft 33,4 32,3 31,1,9 2,3 16, 13, 1,9 5, ft, 3,1 24,9 19,5 16, 13,5 11,5, 7,2 4, ft, 24,2 1,5, 13,5 11,,5 7,3 6,5 5,1 2, ft 19, 1,,5 12,7 1,95,95 7, 6,1 5, 4, 3,7 2,3 THIS HRT IS ONLY GUIE N SHOUL NOT E USE TO OPERTE THE RNE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13

6 capacities Load hart Rating: Series 131 (3.5 m) oom with - ft (7. m 13.4 m) Jib / Full-Span Outrigger 2 ft (6. m) 6 National rane will send you a chart on request or you may secure needed load rating information through your nearest National rane dealer. LENGTH IN FEET 2nd Jib 1st Jib 1 6 Operating radius from /L rotation with unloaded boom IN FEET SERIES 131 WITH - ft JI/ FULL-SPN OUTRIGGER 2 ft HEIGHT IN FEET Structural Limit Line w/ ' Jib Erected o not move unloaded boom beyond limit line. Stability Limit Line w/ lb lock Stability Limit Line w/ lb lock Structural Limit Line w/ lb lock Structural Limit Line w/ ' Jib Erected NOTE: 1. Operate with jib by radius when main boom is fully extended. If necessary increase boom angle to maintain loaded radius. 2. Operate with jib by boom angle when main boom is not fully extended. o not exceed rated jib capacities at any reduced boom lengths. UTION: o not operate crane booms, jib extensions, any accessories or loads within 1 ft (3m) of live power lines or other conductors of electricity. Jib and boom capacities shown are maximum for each section. o not exceed capacities at reduced radii. Load ratings shown on the appropriate charts are maximum allowable loads with the crane mounted on a factory-approved truck and all outriggers at either full span or at mid span range and set on a firm level surface so that the crane is level and all tires are suspended. lways level the crane with the level indicator located on the crane. The operator must reduce load to allow for factors such as wind, ground conditions, operating speeds and their effects on freely suspended loads. Overloading this crane may cause structural collapse or instability. Weights on any accessories attached to the boom or loadline must be deducted from the load chart capacities. o not exceed jib capabilities at any reduced boom lengths. o not deadhead lineblock against boom tip when extending boom or winching up. Keep at least three wraps of loadline on drum at all times. Use only specified cable with this machine. LOLINE EQUIPMENT EUT ownhaul weight... lb (6 kg) One sheave block...2 lb (12 kg) Two sheave block... lb (9 kg) Three sheave block...5 lb (261 kg) Load hart Rating: Series 131 (3.5 m) oom with - ft (7. m 13.4 m) Jib / Full-Span Outrigger 2 ft (6. m) TO 1 ft ( m) RTE LOS WITHOUT JI ft ft ft ft 6 ft *,, 36,9 31,9 26,4 2,1 14, 7, ,1, 2, 24, 19,, 12,3 9,7 7,7 4, , 23,5 1,5 14, 12, 1,,5 6,5 5,2 4,2 2, ,9 17, 14,5 11,7 9,9,3 6,7 5, 4,4 3, 2,95 2,1 1, ,3 13,7 11, 9,, 6,9 5, 4, 3, 3,1 2, 2,1 1, ft 1, 1, 1, 9,4,5 7, 5, 4,7 3,9 3, 2,7 2,2 1, 1, 1, TO ft JI RTE LOS ft JI 5,1 5,1 4,95 4, 4, 3,5 3, 3,2 2,5 2,1 1, 1, ft JI 2, 2, 2, 2,5 2,5 2, 2, 2, 2,5 1,95 1, 1,4 1,1 5 *SHE RES RE STRUTURLLY LIMITE PITIES 13 LENGTH 6 1 ft JI STOWE Reduce load lb Reduce load lb Reduce load lb Reduce load lb Reduce load 3 lb Reduce load lb RTE LO REUTIONS WITH STOWE JI Note: 1. ll capacities are in pounds, angles in degrees, and radii in feet. 2. Loaded boom angles are given as reference only. 3. Shaded areas are structurally limited capacities. 4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams. *5. See owners manuals. The, lb load requires optional 9/16" diameter 6x IWR cable. THIS HRT IS ONLY GUIE N SHOUL NOT E USE TO OPERTE THE RNE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

7 capacities Load hart Rating: Series 131 (3.5 m) oom with - ft (7. m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m) National rane will send you a chart on request or you may secure needed load rating information through your nearest National rane dealer. LENGTH IN FEET 2nd Jib 1st Jib 1 6 Operating radius from /L rotation with unloaded boom IN FEET Stability Limit Line w/ lb lock HEIGHT IN FEET o not move unloaded boom beyond limit line. Stability Limit Line w/ lb lock Structural Limit Line w/ ' Jib eployed Structural Limit Line w/ ' Jib eployed UTION: o not operate crane booms, jib extensions, any accessories or loads within 1 ft (3m) of live power lines or other conductors of electricity. Jib and boom capacities shown are maximum for each section. o not exceed capacities at reduced radii. Load ratings shown on the load rating charts are maximum allowable loads with the outriggers properly extended and the outrigger lock pins engaged on a firm, level surface and the crane leveled and mounted on a factory recommended truck. lways level the crane with the level indicator located on the crane. The operator must reduce load to allow for factors such as wind, ground conditions, operating speeds and their effects on freely suspended loads. Overloading this crane may cause structural collapse or instability. Weights on any accessories attached to the boom or loadline must be deducted from the load chart capacities. o not exceed jib capabilities at any reduced boom lengths. o not deadhead lineblock against boom tip when extending boom or winching up. Keep at least three wraps of loadline on drum at all times. Use only specified cable with this machine. 7 SERIES 131 WITH - ft JI / MI-SPN OUTRIGGER 14 ft LOLINE EQUIPMENT EUT ownhaul weight... lb (6 kg) One sheave block...2 lb (12 kg) Two sheave block... lb (9 kg) Three sheave block...5 lb (261 kg) NOTE: 1. Operate with jib by radius when main boom is fully extended. If necessary increase boom angle to maintain loaded radius. 2. Operate with jib by boom angle when main boom is not fully extended. o not exceed rated jib capacities at any reduced boom lengths. Load hart Rating: Series 131 (3.5 m) oom with - ft (7. m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m) TO 1 ft ( m) RTE LOS WITHOUT JI ft *, 41,,1 3,5 23,95 13,, ft,1, 2, 24, 13,9,9 6,5 4, 2, ft 27, 22,1 14, 9,4 6,5 4, 3,3 2, 1, 1, ft 21,5 14,95 9, 6, 4,95 3, 2, 1,5 1, ft 14,95 1,2 7,5 5, 3,5 2,9 2,5 1, ft 1, 1,2 7,2 5,3 4, 3, 2,2 1, 1, TO ft JI RTE LOS ft JI 5,1 5,1 3, 2,7 1, ft JI 2, 2, 2, 2,4 1,9 1,4 9 5,4 2, 9 *SHE RES RE STRUTURLLY LIMITE PITIES LENGTH 6 1 ft JI STOWE Reduce load lb Reduce load lb Reduce load lb Reduce load lb Reduce load 3 lb Reduce load lb RTE LO REUTIONS WITH STOWE JI Note: 1. ll capacities are in pounds, angles in degrees, and radii in feet. 2. Loaded boom angles are given as reference only. 3. Shaded areas are structurally limited capacities. 4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams. *5. See owners manuals. The, lb load requires optional 9/16" diameter 6x IWR cable. THIS HRT IS ONLY GUIE N SHOUL NOT E USE TO OPERTE THE RNE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13

8 capacities Load hart Rating: Series 1311 (33.5 m) oom with - ft (7. m-13.4 m) Jib / Full-Span Outrigger 2 ft (6. m) National rane will send you a chart on request or you may secure needed load rating information through your nearest National rane dealer. LENGTH IN FEET 2nd Jib 1st Jib Operating radius Structural Limit Line from /L rotation IN FEET w/ ' Jib ected Er with unloaded boom HEIGHT IN FEET o not move unloaded boom beyond limit l StabilityLimit Line w/ lb lock Structural Limit Line w/ ' Jib Erected UTION: o not operate crane booms, jib extensions, any accessories or loads within 1 ft (3m) of live power lines or other conductors of electricity. Jib and boom capacities shown are maximum for each section. o not exceed capacities at reduced radii. Load ratings shown on the appropriate charts are maximum allowable loads with the crane mounted on a factory-approved truck and all outriggers at either full span or at mid span range and set on a firm level surface so that the crane is level and all tires are suspended. lways level the crane with the level indicator located on the crane. The operator must reduce load to allow for factors such as wind, ground conditions, operating speeds and their effects on freely suspended loads. Overloading this crane may cause structural collapse or instability. Weights on any accessories attached to the boom or loadline must be deducted from the load chart capacities. o not exceed jib capabilities at any reduced boom lengths. o not deadhead lineblock against boom tip when extending boom or winching up. Keep at least three wraps of loadline on drum at all times. Use only specified cable with this machine. SERIES 1311 WITH - ft JI / FULL-SPN OUTRIGGER 2 ft NOTE: 1. Operate with jib by radius when main boom is fully extended. If necessary increase boom angle to maintain loaded radius. 2. Operate with jib by boom angle when main boom is not fully extended. o not exceed rated jib capacities at any reduced boom lengths. LOLINE EQUIPMENT EUT ownhaul weight... lb (6 kg) One sheave block...2 lb (12 kg) Two sheave block... lb (9 kg) Three sheave block...5 lg (261 kg) Load hart Rating: Series 1311 (33.5 m) oom with ft- ft (7. m-13.4 m) Jib / Full-Span Outrigger 2 ft (6. m) ft *, 43,,9 3,9,5 19, 14,9 6,3 32 ft 11 ft RTE LOS WITHOUT JI ft,1 2,9 24, 1, 14, 12, 9, 7, 3, ft 23, 17, 14,1 11, 9,5 7,95 6, 5,1 4,5 2, 1, ft 17, 13, 11,2 9,,1 6, 5, 4,3 3,5 2,5 2, 1, ft 13,3 1,95 9,2 7,5 6, 5, 4, 3,7 3, 2, 1,95 1,5 1, ft 7,95 6,3 5,95 5,7 5,4 4, 3,9 3,2 2, 2,1 1, 1, ft JI RTE LOS ft JI 4,2 4,1 4, 3,5 3, 3,3 3,5 2,5 2, 1, 1, ft JI 2,5 2,5 2,5 2,5 2, 2, 2, 2,5 1,9 1, 1,4 1,5 *SHE RES RE STRUTURLLY LIMITE PITIES 13 LENGTH 6 1 ft JI STOWE Reduce load lb Reduce load lb Reduce load lb Reduce load lb Reduce load 3 lb Reduce load lb RTE LO REUTIONS WITH STOWE JI Note: 1. ll capacities are in pounds, angles in degrees, and radii in feet. 2. Loaded boom angles are given as reference only. 3. Shaded areas are structurally limited capacities. 4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams. *5. See owners manuals. The, lb load requires optional 9/16" diameter 6x IWR cable. THIS HRT IS ONLY GUIE N SHOUL NOT E USE TO OPERTE THE RNE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

9 capacities Load hart Rating: Series 1311 (33.5 m) oom with - ft (7. m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m) National rane will send you a chart on request or you may secure needed load rating information through your nearest National rane dealer. UTION: LENGTH IN FEET 2nd Jib 1st Jib Operating radius 2 4 from /L rotation with unloaded boom IN FEET HEIGHT INFEET StabilityLimit Line w/ lb lock o not move unloaded boom beyond limit l Structural Limit Line w/ ' Jib ected Er Structural Limit Line w/ ' Jib ected Er o not operate crane booms, jib extensions, any accessories or loads within 1 ft (3m) of live power lines or other conductors of electricity. Jib and boom capacities shown are maximum for each section. o not exceed capacities at reduced radii. Load ratings shown on the load rating charts are maximum allowable loads with the outriggers properly extended and the outrigger lock pins engaged on a firm, level surface and the crane leveled and mounted on a factory recommended truck. lways level the crane with the level indicator located on the crane. The operator must reduce load to allow for factors such as wind, ground conditions, operating speeds and their effects on freely suspended loads. Overloading this crane may cause structural collapse or instability. Weights on any accessories attached to the boom or loadline must be deducted from the load chart capacities. o not exceed jib capabilities at any reduced boom lengths. o not deadhead lineblock against boom tip when extending boom or winching up. Keep at least three wraps of loadline on drum at all times. Use only specified cable with this machine. 9 SERIES 1311 WITH - ft JI / MI-SPN OUTRIGGER 14 ft LOLINE EQUIPMENT EUT ownhaul weight... lb (6 kg) One sheave block...2 lb (12 kg) Two sheave block... lb (9 kg) Three sheave block...5 lb (261 kg) NOTE: 1. Operate with jib by radius when main boom is fully extended. If necessary increase boom angle to maintain loaded radius. 2. Operate with jib by boom angle when main boom is not fully extended. o not exceed rated jib capacities at any reduced boom lengths. Load hart Rating: Series 1311 (33.5 m) oom with - ft (7. m-13.4 m) Jib / Mid-Span Outrigger 14 ft (4.3 m) ft *, 43,,9 3,9 24,3 13,3, 32 ft 11 ft RTE LOS WITHOUT JI ft 34,1,2 24, 13,95,9 6, 4,3 3, ft 2, 14,4 9, 6,5 4, 3, 2, 1, 1, ft 14,9 9, 6, 4,5 3, 2, 1, 1, ft 1, 6,9 5,5 3,7 2,7 1,95 1, ft 7, 5, 3,9 2,5 2,5 1, ft JI RTE LOS 73 ft JI 4,2 4,1 2, 1, 1, ft JI 2,5 2,5 2,5 2, 1,4 95 5,3 2,1 5 *SHE RES RE STRUTURLLY LIMITE PITIES LENGTH 6 1 ft JI STOWE Reduce load lb Reduce load lb Reduce load lb Reduce load lb Reduce load 3 lb Reduce load lb RTE LO REUTIONS WITH STOWE JI Note: 1. ll capacities are in pounds, angles in degrees, and radii in feet. 2. Loaded boom angles are given as reference only. 3. Shaded areas are structurally limited capacities. 4. Handling of personnel is only permitted with full span extension of all outrigger and stabilizer beams. *5. See owners manuals. The, lb load requires optional 9/16" diameter 6x IWR cable. THIS HRT IS ONLY GUIE N SHOUL NOT E USE TO OPERTE THE RNE. The individual crane s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13

10 accessories 1 Radio Remote ontrols Eliminate the handling and maintenance concerns that accompany cabled remotes. Operate to a range of about ft (76 m), varying with conditions. One-Person asket Strong but lightweight steel basket with 3 lb (139-kg) capacity, gravity hung with swing lock and full body harness. Heavy-duty Personnel asket 1,2 lb (5 kg) capacity steel basket with safety loops for four passengers. Gravity leveling x 42 in (13 x 17 cm) platform. Fast attachment and secure locking systems. Load chart must show 2,3 lb (143 kg) minimum to operate this accessory. ir onditioning ack of cab mounted, self contained modular unit with in cab cool air outlets. Requires 13+ amp. chassis alternator. Winch rum Rotation Indicator Last Wrap Indicator Option on winch with indicator in cab. Outrigger ontrols at operator s seat in addition to ground controls. Single Front Outrigger enter mount front stabilizer with a in vertical stroke with first-up feature. Outrigger Motion larm Outrigger motion alarm with and without SFO. Hour Meter Hour meter in truck cab to record crane operation hours. Hook lock Stowage Hook block and downhaul weight stowage box attached to the boom rest. Open Seat ontrols Open seat controls with railing in lieu of cab. Steel Tool ox Options Spanish-Language anger ecals, ontrol Knobs, and Operators Manuals N4R 1-S 21-S (for dual locking baskets) S-1 S-R1 (provides rotation) WRI LLI IOR SFO OM-3 HRM HS SS S SOM 13

11 dimensions specifications imensions Specifications 11 13

12 Regional Headquarters mericas Manitowoc, Wisconsin, US Tel: Fax: Shady Grove, Pennsylvania, US Tel: Fax: Europe, Middle East, frica Ecully, France Tel: Fax: sia Pacific Shanghai, hina Tel: Fax: Singapore Tel: + 11 Fax: Regional Offices mericas razil lphaville Tel: Fax: Mexico Monterrey Tel: Fax: Europe, Middle East, frica lgeria Hydra Tel: Fax: zeck Republic Netvorice Tel: Fax: France audemont Tel: Fax: ergy Tel: Fax: ecines Tel: Fax: Germany Langenfeld Tel: Fax: Hungary udapest Tel: Fax: Italy Parabiago Tel: Fax: Netherlands reda Tel: Fax: Poland Warsaw Tel: Fax: Portugal lfena Tel: Fax: Lisbon Tel: Fax: Russia Moscow Tel: Fax: U..E. ubai Tel: Fax: U. K. Middlesex Tel: Fax: Sunderland Tel: Fax: sia Pacific ustralia Melbourne Tel: Fax: Sydney Tel: Fax: hina eijing Tel: Fax: Xi an Tel: Fax: Korea Seoul Tel: Fax: Philippines Makati ity Tel: Fax: Factories U.S.. Manitowoc Shady Grove razil lphaville France harlieu La layette Moulins India alcutta Puna Italy Niella Tanaro Germany Wilhelmshaven Portugal Fânzeres hina Zhangjiagang onstant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment MNITOWO Printed in US Form No / 2M