The New Zealand Agent For Skyman

Transcription

1 The New Zealand Agent For Skyman Contact Chris Butler Jason Dennison Unit Parkhead Court - Petone Wellington Po Box Lower Hutt Ph: Fax: admin@jdrigging.co.nz

2 The Speedfix Range The quickest lightweight modular platform to assemble. Length Configuration Platform Weight H400 Skymax 500 Octo 800 SWP SWL SWP SWL SWP SWL 2 M M M M M M WTS 1*2+2* M M WTS 1*2+3* M M WTS 1*3+3* M M WTS 1*2+3+2* M M WTS 2*3+3* M M WTS 2*2+3+2* M M WTS 2*3+2+3* M WTS 2*3+3+3* M WTS 2* * M WTS 2* * M WTS 2* * S.W.P ( self weight of platform) includes; hoist, safety brake, wall and castor rollers, 55m power supply cable, overloads, central control box 50m steel wire ropes S.W.L Safe Working Load WTS Walk Through Stirrups * = Position of walk through stirrup We can test, certify and service all motors and safety brakes at our factory approved workshop based in Petone Wellington. We offer a comprehensive 1 year warranty, Parts and Installation service. We can also supply many other industry specific products, BMUs and a full range of heavy duty platforms, when safety, reliability and functionality are what you are after, we have it for you. All equipment meets with- Europe: Machine Directive 2006/42/EC, following EN 1808+A1 (June Safety Requirements on Suspended access Equipment - Design calculations, stability criteria, construction - Tests. All Sky Man standard equipment is 'CE' type approved.

3 H 400 Hoists Main Features - Easy and fast self reeving hoist - Modular construction for ease of maintenance and interchanging power attachments - Thermal overload to protect against overheating - Fail safe primary brake positively locked with power switch in off position - Hoist mounted, pendant and central control available - Low rope wear factor, no point loads to overstress wire - Independent secondary Safety Brake with manual trip and reset lever - Emergency descent at controlled speed possible when the primary brake is released Options - Overload/underload to protect against platform overloading - Top limit switch stops ascent at preset height - Anti-tilt device ensures platform does not tilt beyond preset maximum - Other power supplies upon request Power Supply Safe Working capacity Climbing speed Power consumption Selfweight Recommended steel wire rope 1~240V/50Hz 400 8,5m/min 3,6 Amp 40 6x17S mixed core 8mm 3~400V/50Hz 400 8,5m/min 1,8 Amp 40 6x17S mixed core 8mm Air 400 8,5m/min 2m/min at 6,5 bar 28 6x17S mixed core 8mm

4 Skymax 500 Hoist Main Features nominal safe working load (SWL) - Uses latest materials technology & design - Uses all existing construction steel wire ropes 8mm (having min breaking strength safety factor to code) - Unique patented traction principle with perfectly distributed load on steel wire rope (the most friendly hoist design for wire ropes) - Low & easy maintenance (min 250 hours or one year for service) - Highest efficiency gearbox (> 95%) - Single through shaft design from motor- to brake side (ultimate safety) - Lightweight: 45 (without safety brake) - Integrated handles for easy carrying - Electrobox containing integrated hour meter - Independent overspeed safety brake with manual trip and reset lever Options - Overload/underload to protect against platform overloading - Top limit switch stops ascent at preset height - Anti-tilt device ensures platform does not tilt beyond preset maximum - Other power supplies upon request Power Supply Safe Working capacity Climbing speed Power consumption Selfweight Recommended steel wire rope 1~220V/50Hz 500 8,5 m/min 6,8 Amp 45 all 8 mm steel wire ropes 3~380V/50Hz 500 8,5 m/min 2,7 Amp 45 all 8 mm steel wire ropes

5 Octo 800 and 1000 Main Features - Easy and fast self reeving hoist - Modular construction for ease of maintenance and interchanging power attachments - Thermal overload to protect against overheating - Fail safe primary brake positively locked with power switch in off position - Hoist mounted, pendant and central control available - Low rope wear factor, no point loads to overstress wire - Independent secondary Safety Brake with manual trip and reset lever - Emergency descent at controlled speed possible when the primary brake is released Options - Overload/underload to protect against platform overloading - Top limit switch stops ascent at preset height - Anti-tilt device ensures platform does not tilt beyond preset maximum - Other power supplies upon request Power Supply Safe Working capacity Climbing speed Power consumption Selfweight Recommended steel wire rope 3~240V/50Hz 800 8,5m/min 3,6 Amp 70 4 x 36 WS Polyprop core 9mm 3~400V/50Hz 800 8,5m/min 2,6 Amp 70 4 x 36 WS Polyprop core 9mm Air 800 8,5m/min 2m/min at 6,5 bar 54 4 x 36 WS Polyprop core 9mm 3~400V/50Hz ,5 m/min Start 11 Amp 75 12x17 special compacted 9mm Running 4 Amp

6 Independent Over Speed Safety Brake Main Features This unit is a precision engineered safety device which is normally used in conjunction with each hoist unit. It can be used on the primary or safety steel wire rope. For most market areas, it is used on the safety steel wire rope. It can be attached directly onto the hoist unit or the platform stirrup. The safety brake, independent of the drive system, actuates during Overspeed conditions only. Its primary function is to halt the descent of a hoist/platform. As the wire rope passes through, it senses the descent speed by means of a centrifugal mechanism. If, as the Safety Brake is travelling down the wire rope, the factory pre-set speed is exceeded, the Safety Brake will lock onto the steel wire rope thereby halting the hoist/platform and support the entire load. The Safety Brake has a Manual Trip Lever for manual activation or functional checking. It also has a Reset Handle. An additional safety feature which senses the horizontal inclination of the platform can be incorporated on request. When the platform reaches an inclination more than 15 à 18%, the safety brake will trip automatically and therefore the jaws will grab onto the steel wire rope. Part number Safe Working capacity Tripping speed Selfweight Recommended steel wire rope B m/min 4,8 all 8 mm steel wire ropes B m/min 4,8 all 9 mm steel wire ropes B m/min 7,3 all 9 mm steel wire ropes

7 Roofbeam LI LO 895 mm mm mm mm (24) (28) (18) (22) (27) (13) 517 (21) 405 (17) 680 (28) 507 (21) (25) (28) (12) 482 (20) 376 (16) 634 (26) 473 (19) (23) (27) (11) 450 (18) 351 (15) 594 (24) 442 (18) (22) (25) (10) 422 (17) 329 (14) 558 (23) 415 (17) 694 (28) 500 (20) (9) 398 (16) 309 (13) 526 (22) 390 (16) 654 (27) Mw = (3 x WLL x LO-SWR x LB)/Li BALANCE RATIO = 3:1 (28) = Number of 25 ballast weights required This easy to assemble modular Roofbeam system offers excellent capacity with minimal effort, we also offer a range of permanent Davits and assemblies. Please do not hesitate to contact us if you should have any questions or queries

8 Maxi Platform The Heavy Duty Modular Platform Length Configuration Platform Weight Octo 800 Octo 1000 SWP SWL SWP SWL 2m m m m m m m m m m m m m m m m m m m m m m