WA & R&M LK

Size: px

Start display at page:

Download "WA & R&M LK"

Paulina Hudson
5 years ago
Views:

Everett, Washington Inside This Issue 2 Project Study: Rockwell Collins in Everett, WA 3 Overhead Bridge Cranes Recent Projects 4

CM Shopstar VS Variable Speed Electric Chain Hoist CM Industrial Products Master Parts Depot 7 Replacement Parts Gorbel GS Series

Handling Solutions for Industry Main Office - Pacific, WA 1334 Thornton Avenue SW Pacific, WA 98047 Toll Free: Vancouver, WA

1 Washington Crane & Hoist Company, Inc. Spring/Summer 2017 Volume 12 Number 1 Material Handling Solutions for Industry Rockwell Collins Installs New Bridge Cranes in Everett, Washington Inside This Issue 2 Project Study: Rockwell Collins in Everett, WA 3 Overhead Bridge Cranes Recent Projects 4 Pacific, WA Office Info Vancouver, WA Office Info 5 Service Department Anchorage, AK Office Info 6 R&M LK Electric Chain Hoists CM Shopstar VS Variable Speed Electric Chain Hoist CM Industrial Products Master Parts Depot 7 Replacement Parts Gorbel GS Series Electric Chain Hoists Spanco PF Series Gantry Cranes 8 Hoist Repair Remanufactured Hoists WASHINGTON CRANE & HOIST Material Handling Solutions for Industry Main Office - Pacific, WA 1334 Thornton Avenue SW Pacific, WA Toll Free: Vancouver, WA Office 4707 NE Minnehaha Building E, Suite 503 Vancouver, WA Office: Fax: Anchorage, AK Office 651 East 100th Avenue Unit B Anchorage, AK Office: Fax:

Rockwell Collins in Everett, WA Installs New Bridge Cranes

their Everett WA facility and chose Washington Crane & Hoist

Washington Crane & Hoist provided the following: 1.

(2-1-Ton Hoists per Crane), 46 Span, Single Girder,

Ton Support Method: Free-Standing Runway System Runway Rail:

2 Rockwell Collins in Everett, WA Installs New Bridge Cranes Rockwell Collins recently installed new bridge cranes in their Everett WA facility and chose Washington Crane & Hoist to supply the overhead material handling equipment. Washington Crane & Hoist provided the following: 1. Furnished two bridge cranes on one free-standing runway system. 2. Performed system installation, start-up, certified load testing and operator training. Equipment Supplied Bridge Crane Systems: 2-2-Ton Capacity (2-1-Ton Hoists per Crane), 46 Span, Single Girder, Top-Running Runway System: Quantity: long Capacity: 4 Ton Support Method: Free-Standing Runway System Runway Rail: 30# ASCE Rail Runway Electrification: Duct-O-Wire conductor bar Bridge Crane Components: Manufacturer: R&M Materials Handling, Inc. - For More Information Call Washington Crane

Overhead Bridge Cranes Washington Crane designs, manufactures and installs engineered overhead bridge crane systems to meet your

Our team of experienced professionals can work directly with you and your company to determine the correct equipment configuration for

Bridge crane systems are available in single or double girder designs with either top- or under-running end truck configurations with

32-Ton Top-Running, Double Girder Bridge Crane 75-Ton Top-Running, Double Girder Bridge Crane at final assembly 25-Ton Top-Running,

of Alaska - Fairbanks, AK: 1-30-Ton, 28 Span, Double Girder, Top-Running Bridge Crane on 1-120 Building Supported Runway System Hancock

Supported Runway Systems Saxon Enterprises - Medford, OR: 1-10-Ton, 51 Span, Single Girder, Top-Running Bridge Crane Installed on

Installed on Existing Runway System The Vaughan Company - Montesano, WA: 1-5-Ton, 45 Span, Single Girder, Top-Running Bridge Crane on

3 Overhead Bridge Cranes Washington Crane designs, manufactures and installs engineered overhead bridge crane systems to meet your material handling requirements. Our team of experienced professionals can work directly with you and your company to determine the correct equipment configuration for your application. Bridge crane systems are available in single or double girder designs with either top- or under-running end truck configurations with capabilities and spans that will meet your requirements. 32-Ton Top-Running, Double Girder Bridge Crane 75-Ton Top-Running, Double Girder Bridge Crane at final assembly 25-Ton Top-Running, Double Girder Bridge Crane at final assembly (top photo also) 20-Ton Top-Running, Double Girder Bridge Crane Recent Projects University of Alaska - Fairbanks, AK: 1-30-Ton, 28 Span, Double Girder, Top-Running Bridge Crane on Building Supported Runway System Hancock Creek-Calligan Creek Hydro Project - Snoqualmie, WA: 2-35-Ton, 45 Span, Double Girder, Top-Running Bridge Cranes on 2-63 Building Supported Runway Systems Saxon Enterprises - Medford, OR: 1-10-Ton, 51 Span, Single Girder, Top-Running Bridge Crane Installed on Existing 125 Runway System The Boeing Company - Seattle, WA: 1-3-Ton, 48 Span, Single Girder, Top-Running Fall Protection Bridge Crane Installed on Existing Runway System The Vaughan Company - Montesano, WA: 1-5-Ton, 45 Span, Single Girder, Top-Running Bridge Crane on Free Standing Runway System 2-5-Ton, 45 Span, Single Girder, Top-Running Bridge Cranes on Free Standing Runway System Skills, Inc. - Auburn, WA: 4-2 x 1-Ton, 12 Span, Single Girder, Under-Running Bridge Cranes on 2 Parallel Free Standing Runway Systems Gem Fabrication -- Renton, WA Bridge Crane System: 1-3-Ton, 68-6 Span, Single Girder, Top-Running Runway System: Long, 3-Ton Capacity Free Standing with 30# ASCE Rail & Electrification

Pacific, WA Office Dave Thompson Equipment & Service Sales Seattle, WA Office Direct: 253-261-4515

Overhead cranes Controls Service and repair Work station cranes Inspections Preventative maintenance

Gammon, Service Manager for assistance with your service requirements.

1334 Thornton Avenue SW Pacific, WA 98047 Office: Jason Gammon Service Manager Seattle, WA Office Cell:

com Vancouver, WA Office Joe Allen Equipment & Service Sales Seattle, WA Office Direct 253-266-4116

com Gayle Singleton Office Manager Office: 360-694-9844 Fax: 360-694-9793 gsingleton@washingtoncrane.

Hoists Crane modernization Overhead crane operator training Replacement parts Hoist repair Call Dave

4 Pacific, WA Office Dave Thompson Equipment & Service Sales Seattle, WA Office Direct: Our Pacific, WA office serving the greater Puget Sound region. Overhead cranes Controls Service and repair Work station cranes Inspections Preventative maintenance Hoists Hoist repair Overhead crane operator training Replacement parts Crane modernization Call Jason Gammon, Service Manager for assistance with your service requirements. Call Dave Thompson or Joe Allen for assistance with your material handling requirements Thornton Avenue SW Pacific, WA Office: Jason Gammon Service Manager Seattle, WA Office Cell: Vancouver, WA Office Joe Allen Equipment & Service Sales Seattle, WA Office Direct Gayle Singleton Office Manager Office: Fax: Our Vancouver, WA office serving the greater Vancouver, WA and Portland, OR areas. Overhead cranes Controls Service and repair Work station cranes Inspections Preventative maintenance Hoists Crane modernization Overhead crane operator training Replacement parts Hoist repair Call Dave Thompson for assistance with your material handling requirements NE Minnehaha Building E, Suite 503 Vancouver, WA Office: Fax: Dave Thompson Equipment Sales Office: Fax: Direct:

Service Department Emergency breakdowns are the priority of our Service Department. Restoring your equipment to full production as quickly as possible is the key to your company s success.

Our Service Department Offers: Fast Response Time Technicians Are Extensively Trained & Experienced Service Trucks Carry A Full Complement Of Tools & The Most Common Replacement Parts One Of The

based on the duty cycle and individual characteristics acte ri tics of your equipment.

We offer training classes for your operator and maintenance personnel to complement these programs.

Inspection Our Inspection Program covers every operating mechanism, all wear items, safety features, structural components, bolted and welded connections and code compliance.

5 Service Department Emergency breakdowns are the priority of our Service Department. Restoring your equipment to full production as quickly as possible is the key to your company s success. Our service technicians have at least ten years experience repairing and maintaining overhead crane systems and have received extensive factory training from major manufacturers, such as P&H, Shaw-Box, Yale and CM. Our service technicians identify the source of problems quickly, develop a repair strategy and effect repairs as quickly as possible to restore your equipment to full production. Our Service Department Offers: Fast Response Time Technicians Are Extensively Trained & Experienced Service Trucks Carry A Full Complement Of Tools & The Most Common Replacement Parts One Of The Largest Replacement Parts Inventory In The Pacific Northwest 24-Hour Emergency Repair, 7 Days A Week Preventative Maintenance Washington Crane offers customized preventative maintenance programs based on the duty cycle and individual characteristics acte ri tics of your equipment. ent These customized programs are designed to provide you with enhanced safety, maximum productivity and reliability of your equipment. We offer training classes for your operator and maintenance personnel to complement these programs. The goal of preventative maintenance is to reduce the cost of ownership of your equipment and provide safe, reliable operation. Inspection Our Inspection Program covers every operating mechanism, all wear items, safety features, structural components, bolted and welded connections and code compliance. Our inspectors remove component covers to inspect brake operation and adjustment, hoist limit switch function and proper lubrication of all gearboxes, wire rope and load chain. A detailed report is provided upon completion of all inspections. You can be assured that you will have a thorough understanding of the condition of your equipment from the perspective of safety, compliance and reliability. Training Washington Crane offers comprehensive onsite training classes. Classes are customized for your individual facility and equipment requirements. Students are tested at the completion of each class and receive a training certificate and wallet card if they achieve a passing grade. Training Classes Offered: Overhead Crane Operator Training: Classes will help your operators comply with State and Federal Codes for providing a safe workplace. A skilled operator can reduce maintenance costs and improve productivity. Training Includes: Daily Start-up Safety Checks Equipment Operation Safe Hoisting Procedures Anchorage, Alaska Office Standard Hand Signals Course Manual Overhead cranes Controls Service and repair Work station cranes Inspections Preventative maintenance Hoists Crane modernization Overhead crane operator training Replacement parts Hoist repair Call Sam Dick for assistance with your material handling requirements. 651 East 100th Avenue, Unit B Anchorage, AK Office: Fax: Sam Dick General Manager Office: Fax: Direct: sdick@washingtoncrane.com

5 ton (2500 kg), two fall Variable frequency drive option on TMU up to 5 tons (5000 kg) Various hoist suspensions including 10, 15 and 20 ft. (3, 4.

(15 m) two fall overload device (clutch); on the load path Two-speed TMU trolley drive unit (speed is High density polyethylene black chain 80/20 FPM) container Trolley brake, drop lugs and bumpers

the DWP of the hoist. No air gap adjustment required.

6 Washington Crane - Your Source for Name Brand Hoists As an authorized distributor for these major brands, we can supply you with new hoists to meet your requirements or factory replacement parts for your existing equipment. LK Electric Chain Hoists Standard Features: 1/8 to 5 ton ( kg) capacities: HMI-Certified License Single fall up to 2.5 ton (2500 kg), two fall Variable frequency drive option on TMU up to 5 tons (5000 kg) Various hoist suspensions including 10, 15 and 20 ft. (3, 4.5 and 6 m) lifts hook, push trolley & motorized trolley (TMU) standard; additional lifting heights available up Disc brake positioned after the mechanical to 98 ft. (30 m) single fall, 49 ft. (15 m) two fall overload device (clutch); on the load path Two-speed TMU trolley drive unit (speed is High density polyethylene black chain 80/20 FPM) container Trolley brake, drop lugs and bumpers are standard Innovative Slip Clutch & Brake: LK Electric Chain Hoists: DC brake for quiet operation; IP66 protection class Easy to adjust slip clutch/overload device Hoist brake designed to last for the DWP of the hoist. No air gap adjustment required. Disc brake is positioned after the clutch on load path Design enables brake to hold load without interaction of the clutch Electrical Limit Switch: Rocker style electrical limit, protected inside hoist body Limit switch triggered by rubber protection of bottom block or rubber cased fall stop on loose end Mounted to pressure cast aluminum chain guide Toughest Gearbox in the Business: Minimum AGMA 10 heat treated helical gearing Permanently lubricated gearbox for the DWP of the hoist Quiet gear train -- < 70 db - Maximum Load Wheel: Precision manufactured, hardened load wheel Patented load wheel with five intermediate teeth; low noise, less chain wear, for smooth and quiet operation Control: Voltage control 48 VAC (50 Hz) or 115 VAC (60 Hz) Single speed hoists are voltage re-connectable for 208, 230, 460V/3/60 Hz and easily re-connectable with plug and fuse change All R&M hoists are statically and dynamically tested with a minimum of 125% rated load prior to shipping ASME HST-1 ASME B30.16 EC Declaration of Conformity CSA approval (60 Hz, 115 VAC models only) RoHS Compliant Plug-in push button pendant with E-stop & built in mainline contactor are standard Integral hoist control panel and push button enclosures both meet NEMA Type 3R (IP55) protection classification Innovative Performance with Easy Operations: Power and control plugs for quick assembly and disassembly Electrics split on two main printed circuit boards (PCB) Power and motor control PCB Electrical cover safety cables retain fasteners during service Electrical components designed for plug and play Easily replaceable components (including hoist motor) Easy access to internal chain guide and sprocket--can be easily inspected and replaced High Performance TEFC (Totally Enclosed Fan Cooled) Motor: Heavy duty type 50% ED rating (exceeds 30 min. rating) on three phase motors IP55 protection; Class F Insulation Optimum cooling with ribbed aluminum construction motor for maximum surface area Motor thermal protection with bi-metal switch Hoist Body: Constructed of pressure-cast aluminum 70μm epoxy painted for corrosion resistance NEW! Shopstar VS Variable Speed Electric Chain Hoist The CM ShopStar VS variable speed electric chain hoist is built for rugged industrial and commercial applications where precision load control is critical. This durable hoist features a high H4-plus duty cycle and a compact design ideal for use at workstations and production lines. The ShopStar VS is a superior alternative to air hoists. Capacities: 250 to 1,100 lbs. Standard Lift: 10 feet Speeds: Up to 63 ft./min. Thermally protected hoist motor Rugged, cast aluminum alloy hoist frame & body with durable epoxy powder-coat finish to protect against corrosion Gear train lifetime lubricated with nonoxidizing grease. Totally enclosed hoist frame protects motor from environmental contamination Compact design makes hoist ideal for use in tight spaces & allows for easy installation and maintenance Standard overload device protects the hoist, operator and surrounding structure from damaging overloads Durable CM Hoistaloy Load Chain Single & 3-phase voltage options H4 Plus duty cycle 5:1 Design factor NEMA 4 industrial-rated control system Standard rigid-hook suspension High reliability and long life Lifetime warranty Made in U.S.A. MASTER PARTS DEPOT Washington Crane is an Authorized Master Parts Depot and Service Center for Puller & Lever Hoists Hand Chain Hoists Electric Chain Hoists Air Chain Hoists Manual & Powered Trolleys Chain Slings Shackles Replacement Parts For More Information

Replacement Parts Washington Crane is an authorized distributor for most major brands of crane and hoist equipment manufacturers.

Non-stock items are expedited by our Parts Department direct from our national network of suppliers.

Demag Detroit Hoist Dillon Downs Dresser Duct-o-Wire Duff Norton Electrolift Electromotive Gardner Denver Gleason Gorbel Harrington Howell Hubbell Industrial Electric Reels Ingersoll-Rand PF Series

Spanco Stearns Stinson Electric Telemotive Thern UniTech Vaculift Walker-Bux Wallace Wampfler Weissenfels Wright Yale Zimmerman GS Series Electric Chain Hoist New Hoists from the Gorbel Name You

The Spanco PF Series gantry cranes can be ideal if: Your building can t support jib cranes or overhead cranes. PF Gantry Cranes are self-supporting and travel directly on the floor.

You lease your facility; these gantries can be relocated in the future. Your plant has been making do with multiple forklifts.

7 Replacement Parts Washington Crane is an authorized distributor for most major brands of crane and hoist equipment manufacturers. We maintain an extensive inventory of replacement parts for quality name brands, such as CM, SHAW-BOX, R&M, GORBEL, YALE, CLEVELAND TRAMRAIL, BUDGIT & more. Non-stock items are expedited by our Parts Department direct from our national network of suppliers. Abell Howe Acco Aero-Motive American Monorail Anver Beebe Budgit Bushman Caldwell Cattron Chester Cleveland Tramrail CM Coffing Control Chief Crosby David Round Distributor For These Manufacturer Demag Detroit Hoist Dillon Downs Dresser Duct-o-Wire Duff Norton Electrolift Electromotive Gardner Denver Gleason Gorbel Harrington Howell Hubbell Industrial Electric Reels Ingersoll-Rand PF Series Gantry Cranes Insul 8 J D Neuhaus LiftAll LiftTech Lo-Hed Louden Motortronics Olympic Synthetic Positech Power Electronics R&M Renfroe Reuland Ruger Saf-T-Bar Saftronics Saturn SEW Eurodrive Shaw-Box Spanco Stearns Stinson Electric Telemotive Thern UniTech Vaculift Walker-Bux Wallace Wampfler Weissenfels Wright Yale Zimmerman GS Series Electric Chain Hoist New Hoists from the Gorbel Name You Trust Overview Spanco PF Series Gantry Cranes offer high capacity, high height, long span, and economical lifting solutions. The Spanco PF Series gantry cranes can be ideal if: Your building can t support jib cranes or overhead cranes. PF Gantry Cranes are self-supporting and travel directly on the floor. Your lifting volume is moderate and can t justify more expensive, permanently installed cranes. You need an economical, versatile lifting system to supplement your existing overhead cranes. You lease your facility; these gantries can be relocated in the future. Your plant has been making do with multiple forklifts. Coordinating too many lifts, especially on heavy or very long loads, is unsafe, inefficient, and time consuming. Can t fit a double leg PF crane into your plant due to narrow bays or crowded machinery? Check out Spanco Single Leg Gantry Cranes. Power Drive Options for PF Series Gantry Cranes Capacities: up to 15 tons Height under I-beam, standard: up to 35 Spans, standard: up to 40 Spans, custom: up to 50 * * For custom spans above 50, contact Washington Crane. V-Track Drives: Two motors drive rigid steel V-groove wheels along a fixed path. See Power Drive Options Kits. Guide Angle Drives: Ideal for installations where gantry runs along a wall. Two motors on one side of the gantry drive trackless polyurethane wheels that are led by a small guide angle. The guide angle simply lags into the floor, at the base of the wall. See Power Drive Kits. Trackless Drives: When you need to keep your shop floor clear of all tracks or angle guides. A selector switch in the control pendant selectively turns each motor on and off to guide the gantry along. Gorbel s GS hoist line offers a wide range of models in different speeds and capacities to best meet your needs. Gorbel s rugged construction makes them ideal for both high production environments and those applications requiring only periodic lifting and positioning. Gorbel Electric Chain Hoist Features The compact body design makes it the perfect dimension for any work area and makes it an ideal hoist for low headroom applications. Plus, the smaller size lends itself to easy installation and relocation All components from gears to case are fabricated at a single location for superior quality control Available in a variety of three phase configurations, as well as Capacities from 1/8 to 5 tons to meet the needs of users in a wide range of industries Can be used with Gorbel Work Station Crane trolleys or equipped with trolleys for S Beams and W Beams Direct acting upper and lower limit switches Tested in accordance with ASME, as well as FEM/ISO Ideal for both high production environments and those applications requiring only periodic lifting and positioning Low voltage, 24V transformer fused for operator protection. Modular brake and clutch externally mounted for easy service. Standard DC brake for long service life. Totally enclosed, fan cooled motor. Cased hardened gears provide quiet, smooth operation, and longevity. All components from gears to case are fabricated at a single location for superior quality control. Modular control package features standard IEC contactors, as well as upper and lower limit switches. Consistent rectifier throughout the hoist offering and voltage range minimizes spare parts inventory.

Hoist Repair WASHINGTON CRANE & HOIST Material Handling Solutions for Industry President........................... Mike Currie Operations Manager..................Chris Payne Marketing & Sales Manager.

com Our Hoist Repair Facility is staffed with full-time factory trained technicians and is supported by one of the most complete parts inventories in the Pacific Northwest.

authorized warranty repair center for most hoist brands Large stock of replacement parts for CM, YALE, SHAW-BOX, BUDGIT and R&M Fast turnaround?

1-ton through 5-ton hoists in the greater Portland, OR and Seattle, WA metro areas For more information, call Dave Thompson: Direct: 253-261-4515 Office: Before Remanufactured Hoists Remanufacturing

factory specifications Unit is repainted Unit is load tested and furnished with load test certification After For more information, Our remanufactured hoists offer: call Dave Thompson: A 1-year

8 Hoist Repair WASHINGTON CRANE & HOIST Material Handling Solutions for Industry President Mike Currie Operations Manager Chris Payne Marketing & Sales Manager Jeff Jetter LOCATIONS Seattle, WA Office: Washington Crane & Hoist Company, Inc Thornton Avenue SW Pacific, WA Toll Free: Our Hoist Repair Facility is staffed with full-time factory trained technicians and is supported by one of the most complete parts inventories in the Pacific Northwest. Complete hoist mechanical and electrical repairs Experienced factory trained and authorized repair technicians Factory authorized electric motor distributor Electric motor rewind capability Factory authorized warranty repair center for most hoist brands Large stock of replacement parts for CM, YALE, SHAW-BOX, BUDGIT and R&M Fast turnaround? 3 to 5 days depending on part availability Custom designed shipping containers to transport your hoist via UPS, FEDEX or common carrier Onsite hoist maintenance training Free pickup and delivery on 1-ton through 5-ton hoists in the greater Portland, OR and Seattle, WA metro areas For more information, call Dave Thompson: Direct: Office: Before Remanufactured Hoists Remanufacturing Includes: Unit is completely disassembled All bearings are replaced Gearbox grease and gasket are replaced Unit is reassembled with any additional parts requiring replacement to return unit to factory specifications Unit is repainted Unit is load tested and furnished with load test certification After For more information, Our remanufactured hoists offer: call Dave Thompson: A 1-year warranty for parts and labor Direct: A cost savings over similar new equipment Office: In stock for immediate shipment dthompson@washingtoncrane.com Vancouver, WA Office (serving Oregon): Washington Crane & Hoist Company, Inc NE Minnehaha Building E, Suite 503 Vancouver, WA Office: Fax: Anchorage, AK Office: Washington Crane & Hoist Company, Inc. 651 East 100th Avenue, Unit B Anchorage, AK Office: Fax: Overhead Cranes Workstation Cranes Hoists Training Replacement Parts Repair Service Inspection Crane Modernization Fabrication Controls Consulting Engineering Copyright 2017 Washington Crane & Hoist Co., Inc. All rights reserved. Reproduction of this newsletter by any means, in whole or part, without written permission is prohibited by law. Solutions is published two times per year by Washington Crane & Hoist Company, Inc.

SPACEMASTER WIRE ROPE HOISTS

SPACEMASTER WIRE ROPE HOISTS The Spacemaster SX represents an innovative design that includes a large drum diameter giving Spacemaster SX hoists the lowest headroom and best wheel loads in the industry