PH-A 280 Series. 50W to 300W DC-DC Converters, Single Output High Density Power Modules. PH-A 280 Series 1. Specification
|
|
|
- Joanna McCormick
- 5 years ago
- Views:
Transcription
1 PH-A 280 Series 50W to 300W DC-DC Converters, Single Output High Density Power Modules Features High Density Up to 425 Vdc Input Fixed Operating Frequency High Efficiency Certified to IEC/EN OVC III Benefits Smaller Package Size Cover HVDC Telecom Requirements Easier System Filtering Better System Thermal Management No External Transformer Needed Quarter brick shown Specification Model PH50A280 PH75A280 PH100A280 PH150A280 PH300A280 ITEMS Input Voltage range VDC Input Current (1) A See Model selector Output Voltage Accuracy % +/-2 Maximum Ripple and Noise (5) mv 3.3 & 5V: 100mV, 12 & 15V: 150mV, 24V: 240mV, 28V: 280mV, 48V: 400mV (300W 480mV) Temperature Coefficient - <0.02 C / W Overvoltage protection (2) (4) - See model selector Overcurrent protection (6) % Remote sense (2) - Yes Remote ON/OFF control (2) - yes - SHORT=ON OPEN=OFF Series Operation (2) - Yes Parallel Operation - No Operating Temperature (2) C -40 C to +100 C (Baseplate), -40 C to +85 C (Ambient) Storage Temperature C -40 C to +100 C Humidity (non condensing) - Operating: 5-95%RH, Storage: 5-95%RH Cooling - Conduction cooled Withstand Voltage (3) - I/P to Baseplate 2.5kVAC (20mA), I/P to O/P: 3kVAC (20mA), O/P to Baseplate: 500VAC (20mA) for 1min Isolation Resistance MΩ >100MΩ at 25 C & 70%RH, Output to Baseplate: 500VDC Vibration Hz (1 minute sweep), Amplitude 0.825mm Constant (Maximum 49.0m/s²) X, Y, Z 1 hour each Shock m/s ² Safety Agency Approvals - UL , CSA , EN , EN (OVC III, PH300A only), CE mark (LVD) Weight (Typ) g W: 55, 300W: 100 Size (W x H x D) (7) mm Quarter Brick Format Half Brick Format 37.2 x 12.7 x x 12.7 x 57.9 Warranty yrs 5 Notes: (1) At 280 VDC input and maximum output current (baseplate temperature = 25 C) (2) Refer to detailed Specifications & Instruction Manual (3) This specification applies to the Power Module as a stand-alone item (4) OVP reset: Line OFF or Control OFF (5) VDC input, Constant load (6) Constant current limitation - Automatic recovery (7) Refer to outline drawing Read Instruction Manual carrefully before using the Power module unit PH-A 280 Series 1
2 Model Selector Model Output Output Adjust Max Output Max Output Efficiency (3) Input Current Load Reg (1) Line Reg (2) OVP Voltage Range (V) Current (A) Power (W) (%) (A) (mv) (mv) (V) PH50A V PH50A V PH50A V PH50A V PH75A V PH75A V PH75A V PH75A V PH75A V PH75A V PH75A V PH100A V PH100A V PH100A V PH100A V PH100A V PH150A V PH150A V PH150A V PH150A V PH150A V PH300A V PH300A V PH300A V PH300A V PH300A V Notes: (1) No load - Full load, Constant input voltage (2) VDC input, Constant load (3) At 280VDC input and maximum output current Derating Curve PH-A 280 Series Pin Assignments Pin Description Function +Vin Positive Input Terminal -Vin Negative Input Terminal +S Positive Remote Sense -S Negative Remote Sense +V Positive Output Terminal -V Negative Output Terminal CNT On/Off Control Terminal TRM Output Adjustment Trim Pin Heat Sink Accessories Model Description HAQ-10T PH50A to 150A 25mm transverse fins HAH-10T PH300A 25mm transverse fins HAH-15T PH300A 38mm transverse fins HAH-15L PH300A 38mm longitudinal fins 2 PH-A 280 Series
3 Basic Connection PH-A 280 Series Read instruction manual carefully before using the Power Module Outline Drawing PH50-A to PH150-A 280 Series PH-A 280 Series 3
4 Outline Drawing PH300-A 280 Series 4 PH-A 280 Series
5 TDK-Lambda France SAS 3 Avenue du Canada Parc Technopolis Bâtiment Sigma les Ulis France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via Giacomo Matteotti Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com Netherlands info@nl.tdk-lambda.com TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Local Distribution TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com TDK-Lambda Ltd. 1 Alexander Yanai Segula Petah-Tikva Israel Tel: Fax: info@tdk-lambda.co.il C.I.S. Commercial Support: Tel: +7 (495) Technical Support: Tel: +7 (812) info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info@at.tdk-lambda.com Switzerland Sales Office Eichtalstrasse Hombrechtikon Switzerland Tel: Fax: info@ch.tdk-lambda.com Nordic Sales Office Haderslevvej 36B DK-6000 Kolding Denmark Tel: info@dk.tdk-lambda.com PH-A 280 Series Oct18 v13 PH-A 280 Series 5
EVS Series. 300 and 600W Constant Current Power Supplies. EVS Series 1. Specification
EVS Series www.emea.tdk-lambda.com/evs 300 and 600W Constant Current Power Supplies Features Benefits 300W Convection cooled and 600W fan model Silent fanless chargers CC (constant current) mode Quick
CUS200M Series. Single Output 200 to 250W Medical & ITE Power Supplies. CUS200M Series 1. Specification
CUS200M Series www.emea.tdk-lambda.com/cus200m Single Output 200 to 250W Medical & ITE Power Supplies Features Benefits IEC 1-1 (2x MOPP) & IEC 950-1 Approvals Suitable for B & BF type Medical and ITE
RWS-B Series. 50W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
RWS-B Series. 100W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 100W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
CUT75 Series. Dual or Triple Output 75W Low Profile Power Supplies. CUT75 Series 1. Specification
CUT75 Series www.emea.tdk-lambda.com/cut Dual or Triple Output 75W Low Profile Power Supplies Features Benefits Triple (useable as dual) output supply Addresses multiple voltage needs in one hit Compact
CUS100ME Series. 2 x 4 100W AC-DC Power Supplies. CUS100ME Series 1. Specification
CUS100ME Series www.emea.tdk-lambda.com/cus100me 2 x 4 100W C-DC Power Supplies Features enefits 100W Convection Rating Quiet Operation 75W With 1m/s irflow at 85 C mbient Suitable for High mbient Temperature
Z+ Series. 200W, 400W, 600W and 800W Programmable DC Power Supplies. Z+ Series 1. Model Selector. Minimises system rack height
Z+ Series www.uk.tdk-lambda.com/zplus Features 2U high uilt-in US, RS232 & RS485 Optional LAN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc Arbitrary function generation 5 year warranty
Operating temperature (2, 3, 5) C -20 C to +70 C ( see derating curves) Storage temperature C -40 C to +85 C
www.uk.tdk-lambda.com/drb 15W to 100W Single Output DIN Rail Mount Power Supplies Features Compact Footprint Efficiency up 91% ErP Compliant Design Benefits Saves Space on Rail & Cabinet Cost Cooler Applications
MODEL ZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF
ZWS-BAF Series www.uk.tdk-lambda.com/zws-baf 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use Features 10 Year e-cap Lifetime 5 Year Warranty Convection Cooling Benefits
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification (1)
www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x 4 inch footprint
PXF Series. PXF Series 1. Key Market Segments & Applications. PXF Features and Benefits. Single, Dual, Triple Output 40W & 60W DC-DC Converters
Industry Standard 2 x 2 Footprint Six Sided Shielding Agency Approved 12, 24 and 48V Inputs 4:1 Wide Range Input Models Single, Dual, Triple Output 40W & 60W DC-DC Converters Key Market Segments & Applications
DSP Series 7.5W to 100W Low Profile Din Rail Mount Power Supplies
Low Profile for Building Automation 5V to 24V Outputs Wide Range AC Input -25 C to +71 C Operation Convection Cooled UL1310 Class 2 Class II Double Insulation 7.5W to 100W Low Profile Din Rail Mount Power
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification
ZMS100 Series www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x
Programmable Power Supplies
Programmable Power Supplies Automotive EMEA - Edition 1 2 Programmable Power Supplies Special models for automotive applications TDK-Lambda s series of programmable DC power supplies offer a wide variety
Input surge voltage (max 3 seconds) 24V Nom : 50VDC 48V Nom: 100VDC
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 6W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low patient leakage 4:1 Wide input range Benefits Easier system approval
Conducted and radiated emissions (Note 4) EN55011, EN55022, Class A and FCC part 18 Immunity (Note 5)
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 3W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low leakage 4:1 Wide input range Benefits Easier system approval Patient
DIN Rail Power Supplies 10W to 960W
DIN Rail Power Supplies 10W to 960W EN Edition 1 2015 2 Innovative, reliable, powerful DIN rail power supplies from TDK-Lambda deliver the highest quality and performance required for tough industrial
RWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
Power Supplies, DC-DC Converters and EMC/EMI Filters
Power Supplies, DC-DC Converters and EMC/EMI Filters Healthcare EMEA - Edition 1.1 Healthcare Power Supply Solutions. Worldwide. 2 www.emea.tdk-lambda.com TDK-Lambda Corporation, a group company of TDK
TDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
TDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
The benefits of using non-isolated DC-DC converters
The benefits of using non-isolated DC-DC converters The DC power requirement for electronic industrial equipment often consists of a 24V high power output and a number of lower power, lower voltages. Traditionally
ZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
PAF SERIES. Features. Model naming method PAF 500 F / Conformity to RoHS Directive. Applications. Product Line up. DC/DC Module 400W-700W PAF
SERIES DC/DC Module 400W-700W 2 Features Full brick industry standard size (61 12.7 116.8mm) High power density (industry-leading level in 700- F48) Broad range of baseplate operating temperatures: -40
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
Ordering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
*Last time buy date of PAH200H: Mar. 29, *Last time buy date of PAH50S, 75S, 100S, 150S, 200S: Dec. 2, PAH450S PAH75D
*Last time buy date of 200H: Mar. 29, 2019. *Last time buy date of 50S, 75S, 100S, 150S, 200S: Dec. 2, 2019. SERIES Single / Dual Output 50-450W 200H 200S 300S 350S 450S 75D 2 75D 100S 150S 75S Features
DRL-1 Series Instruction Manual
DRL-1 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage could lead to an electrical shock, damage to the unit
(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency
SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
LS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
Switching Power Supply
Switching Power Supply Easy-to-use Industrial Power Supply with Versatile Functions (); Power Supply Suitable for Peak Loads such as Motors and Solenoids (-P) Remote control function incorporated. Remote
Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies Part Numbers
Standard Series Key features: Wide power range: 7.W-4W Universal input : 7.W-W: 8-264V /1-37V DC W: 8-2V /17-264V 24-37V DC (selectable) W, W, 24W: 8-264V /11-3V DC 4W: 3 phase: 32- V 3 phase: 3- V Overcurrent/overvoltage
<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Sixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
Switching Power Supply
Switching Power Supply Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs: 10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, ±12, and ±15 V. 65 mm depth enables mounting onto panels
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
Note1: Efficiency is tested by nominal Vin, full load and at 25 C. Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 1Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 93% No minimum load required EN5155, IEC/EN95-1 & UL95-1
Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
DC/DC converter SINGLE OUTPUT
DC/DC converter SINGLE OUTPUT SOPHISTICATED DC/DC TOPOLOGY! η = 94%!! DC/DC high efficiency module Wide Input range Various output voltages High output current High efficiency up to 94% Approved: UL60950,
Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
Switching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
Model Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power
Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection
OUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A
210W to Single Output Full Brick DC/DC Converters STANDARD FULL BRICK PACKAGE POWER DENSITY UP TO 5.53W/CM 3 EFFICIENCIES FROM 86-91% ACTIVE LOAD SHARING WIDE INPUT VOLTAGE RANGE ACTIVE LOAD SHARING REMOTE
INDUSTRIAL POWER SUPPLIES SFL-SERIES
INDUSTRIAL POWER SUPPLIES SFL-SERIES Operating Instructions 1. Application The SFL-series are compact, rugged switching power supplies designed for applications in process automation and other industrial
DH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
Panel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)
Z+ Series Features 2U high uilt-in US, RS232 & RS485 Optional LN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc rbitrary function generation 5 year warranty Minimises system rack
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
Open Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Efficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 91% No minimum load required UL695-1, EN5155 & IEC/EN695-1
Specifications 2019-V AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W
2019-V1.0-0318 Specifications AC-DC Din Rail Mounted Power Supply IS-70 Series, 70W No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2019 AC-DC Din Rail
PRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number....: T223-0035/16 Date of issue...: 2016-02-01
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
The 3 kw Models will accept 200*/230 VAC single phase and 200*/208 VAC three phase input power.
Sorensen DLM 3 & 4 kw Series DC Power Supply High Power Density : 3 kw and 4 kw models, 2U (3½ high), (19 wide); no top or bottom clearance spacing required Preview Push-button : Overvoltage protection
D R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
Features. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
DORADO MV DC/DC CONVERTERS 24V Input 12VDC 8A Output
1/4 Brick Dorado MV Series Industry standard pinout and footprint High efficiency: 86% at 12V, 8A; 88% at 12V, 4A Very low common-mode noise for a commercial DC/DC converter Constant switching frequency
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
NES50-48 : High efficient DC/DC converters
NES5048 Series: Isolated DC/DC Converters NES5048 : High efficient DC/DC converters Features Industry standard EighthBrick pin map High efficiency Low noload power dissipation Wide operating temperature
Input voltage Power rating Output voltage Output current With Front mounting Bracket. With DIN-rail mounting Bracket 400/480 VAC
Three-phase Input Switch Mode S8PE DIN-rail mounting, 3-phase input Switch mode Supply with a range of 5A to 40A output current 3 phase 400/480 or 200/230 VAC input 5, 10, 20 and 40A; 24 VDC output Higher
UCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
PDR circuit breaker - Ground fault Datasheet
- Ground fault Datasheet protection device Features Blue housing 1-3 poles plus neutral 7-100mA Preciese, temperature independent operation Choise of time delays, terminals and actuator colours Application
Safety Interlock Switches
Safety Interlock Switches ATK ATK Safety Key Selector Switch Key-type selector switch with direct opening mechanism Selector Switch for secure equipment activation during maintenance 0 types of exclusive
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
Industrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
CN100A110 SERIES Instruction Manual
CN100A110 SERIES Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all cautions and warnings before using
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/80/80466451.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
Output Current. Output Unit. Feature Set i 6A A 033 V R TDK- Lambda Dallas Technical Center. 14 Amps 3.3V Single
Ordering information Product Identifier Platform Input Voltage Current Unit Range # of Feature Set i 6A 24 014 A 033 V 001 -R TDK- Lambda Dallas Technical Center Option Table Feature Set 33.0 x 22.9mm
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/77/76098235.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
Power ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
EB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
RP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
UNA SERIES Embedded Power Supply Features Model naming method UNA 350P / Applications UNA Conformity to RoHS Directive Product Line-up
SERIES 350PB, PN 350PB/350PN Specifications CH 2 3 5 Voltage Range (*)(*8) V AC85-265 (AC85-5 : Need output derating) Frequency (*)(*8) Hz 7-63 Power Factor (00/20VAC)(typ) (*5) 0.98 / 0.92 (Ta=25) Input
Digital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
Sorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
J1000. Compact Inverter Series.
J1000 Compact Inverter Series www.yaskawa.eu.com Focus on Application Customer orientation and application focus two attributes of machine equipment YASKAWA offers with its J1000 compact inverter drive
INTRONICS CORPORATE PROFILE
INTRONICS CORPORATE PROFILE Founded in 1968, INTRONICS is an international electronics manufacturing company maintaining performance and quality leadership in several core product lines: Standard, Modified
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
Maximum input voltage 420V or less Including peak value
Input-output condition Input voltage range DCV~4V Average voltage Maximum input voltage 4V or less Including peak value Input ripple voltage lower limit Rated input voltage Rated output voltage 75V or
HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
FR circuit breaker - hydraulic magnetic,
FR circuit breaker - hydraulic magnetic, Datasheet railway, very high current Features Ideal for very high current applications Precise, temperature independent operation Panel mount Integrated auxiliary
A22NK. Key-type Selector Switches
Key-type Selector Switches -mm dia. Key-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy
Features. Description. Table of Contents
Features Very low profile Very high efficiency (typically 90%) Single and dual output versions Input voltages from 24V to 110VDC nominal voltages from 5V to 48VDC -40 C to +71 C operation without de-rating
Power Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module
Description. Operational Features. Mechanical Features. Safety & EMC. Control Features. Protection Features
48Vdc Input, 12Vdc@33A Output Quarter-brick Converter AVQ400-48S12-6L Description The AVQ400-48S12 is a single output DC/DC converter with standard quarter-brick outline and pin configuration. It delivers