PXF Series. PXF Series 1. Key Market Segments & Applications. PXF Features and Benefits. Single, Dual, Triple Output 40W & 60W DC-DC Converters
|
|
|
- Britney Davis
- 5 years ago
- Views:
Transcription
1 Industry Standard 2 x 2 Footprint Six Sided Shielding Agency Approved 12, 24 and 48V Inputs 4:1 Wide Range Input Models Single, Dual, Triple Output 40W & 60W DC-DC Converters Key Market Segments & Applications Telecom Datacom Point of Load PXF Features and Benefits Features UL, CSA, EN, CE Approvals Wide Range Input Six Sided Shielding Benefits Easier System Approvals Less Parts to Inventory Reduced Radiated Noise Specifications ITEMS PXF Maximum Output Power 40W or 60W Voltage Accuracy (Full Load, Nom. Vin) Single, Dual and Triple Main ±1%, Triple Auxiliaries ±5% Voltage Adjustment (1) ±10% (Single and Dual Output Only) Minimum Load, each output (2) Single Output = 0%, Dual and Triple = 10% of full load rating Line Regulation Single / Dual ±0.5%, Triple (main) ±1%, Triple (auxiliary) ±5% Load Regulation (10% to 100%) (3) Single ±0.5%, Dual ±1%, Triple (main) ±2%, Triple (auxiliary) ±5% Cross Regulation (25% to 100%) (4) Triple (main) ±1%, Dual/Triple (auxiliary) ±5% Start up time PXF40: 25ms typ., PXF40xxW, PXF60: 20ms max. Remote on/off (referenced to negative input) Positive Logic: ON: Open or V, OFF Short or <1.2V Temperature Coefficient <±0.02%/ C Operating Temperature See derating curves Maximum Case Temperature PXF40: +100 C, PXF40-xxW +105 C, PXF C Storage Temperature PXF40: -55 C to +105 C, PXF40xxW, PXF C Thermal Shock MIL-STD-810F Relative Humidity (non condensing) 5 to 95% Transient Response (25% step load change) 250µs recovery Overvoltage Protection (Zener clamp) Typical 3.3V: 3.9V, 5V: 6.2V, 12V: 15V, 15V: 18V Overcurrent and Short Circuit Protection Typically at 150%, hiccup with self recovery Input Surge Voltage (Maximum for 100ms) 12V input: 36V, 24V input: 50V, 48V input: 100V Reflected input ripple (peak to peak) (5) PXF40: 40mA, PXF40xxW, PXF60: 20mA Isolation Voltage Input - Output, Input to Case: 1600VDC minimum Isolation Resistance 10 9 Ω minimum Isolation Capacitance (max) PXF40, PXF60: 1000pF, PXF40xxW: 2500pF Switching Frequency (Fixed) 300kHz (typ.) MTBF (BELLCORE TR-NWT ) PXF40: 1,398,000; PXF40xxW: 1,105,000, PXF60: 1.093,000 hours Vibration 10-55Hz, 10G, 30 minutes each X, Y, Z axis Conducted and Radiated Emissions EN55022 Level A, see installation manual Immunity EN , -3, -4, -5, -6 Safety Agency Approval IEC , UL , EN , CE Mark (48V input only) Size mm (L x W x H) 50.8 x 50.8 x 10.1 Weight (g) 60 Warranty (yrs) 2 1
2 Refer to application notes on website for external circuitry and PCB layout (1) Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +Sense and - Sense should be connected to their corresponding outputs; + output, - output. (2) Dual and Triple output models require a minimum load of 10% on the output to maintain specified regulation. No load operation will not damage the device. (3) Load regulation for triple output: Main output:10-100%, with % balanced load on auxiliaries. Auxiliary outputs: 10% to 100% balanced on all outputs. (4) Cross regulation for dual output: asymmetrical load 25% / 100% full load. Cross regulation for triple output: Main output 100% load, auxiliary 100%, other auxiliary 25% to 100%. Auxiliary outputs: main output 100% load, auxiliary 100%, other auxiliary 25% to 100% or main output 25%, auxiliary 25%, other auxiliary 25% to 100%. (5) Simulated Source impedence of 12µH placed in series with + input. Model Selector Output Output Input Ripple/Noise Efficiency Max Load Volt(V) Curr(A) Volt(VDC) Model (mv) (%) Cap(uF) ) Single Outputs PXF40-12S3P PXF40-24WS3P PXF40-24S3P PXF40-48WS3P PXF60-24S3P PXF40-48S3P PXF60-48S3P PXF40-12S PXF40-24WS PXF40-24S PXF40-48WS PXF40-48S PXF60-24S PXF60-48S PXF40-12S PXF40-24WS PXF40-24S PXF40-48WS PXF40-48S PXF60-24S PXF60-48S PXF40-12S PXF40-24WS PXF40-24S PXF40-48WS PXF40-48S PXF60-24S PXF60-48S Dual Outputs ±12 ± PXF40-24WD ±1200 ±12 ± PXF40-12D ±1200 ±12 ± PXF40-24D ±1200 ±12 ± PXF40-48WD ±1200 ±12 ± PXF40-48D ±1200 ±15 ± PXF40-24WD ±750 ±15 ± PXF40-12D ±750 ±15 ± PXF40-24D ±750 ±15 ± PXF40-48WD ±750 ±15 ± PXF40-48D ±750 Triple Outputs 3.3V,±12V 6.0,± PXF40-12T / ,± V,±12V 6.0,± PXF40-24T / ,± V,±12V 6.0,± PXF40-48T / ,±330 5V,±12V 6.0,± PXF40-12T / , ±330 5V,±12V 6.0,± PXF40-24T / , ±330 5V,±12V 6.0,± PXF40-48T / , ±330 5V, ±15V 6.0, ± PXF40-12T / , ±110 5V, ±15V 6.0, ± PXF40-24T / , ±110 5V, ±15V 6.0, ± PXF40-48T / , ±110 2
3 Outline Drawing PXF40 Series Derating Curve OUTPUT POWER (%) PXF40-48S05 & PXF60-48S05 Derating Curve Pinout Function PIN# Single O/P Dual O/P Triple O/P 1 + Input + Input + Input 2 - Input - Input - Input 3 Remote on/off Remote on/off Remote on/off 4 N/C No Pin + Aux 5 - Sense (Note 1) + VO Common 6 + Sense (Note 1) Common -Aux 7 + Output Common + Output 8 - Output - VO - Output (Com) 9 Trim Trim N/C Heat Sink (5.58mm high) 7G0026A (includes thermal adhesive pad) PXF40 Series Options Single Output Dual Output Triple Output Suffix Function Function Function No Suffix Positive Logic & Output Trim Positive Logic & Output Trim Positive Logic (No Trim Function) 3
4 Outline Drawing PXF40 & PXF60 wide range (1) All dimensions in inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) (2) Pin pitch tolerance ±0.01 (0.25) (3) Pin dimension tolerance ±0.004 (0.1) Pinout PIN# Single O/P Dual O/P (7) 1 + Input + Input 2 - Input - Input 3 Remote on/off Remote on/off 4 - Sense + Output 5 + Sense Common 6 + Output Common 7 - Output - Output 8 Trim Trim PXF40 wide range and PXF60 Options Single Output Dual Output (7) Suffix Function Function No Suffix Positive Logic & Output Trim Positive Logic & Output Trim N Negative Logic & Output Trim Negative Logic & Output Trim Add suffix for required options, Example PXF40-48WS12-N (7) Dual output available on PXF40 wide range only 4
5 TDK-Lambda France SAS ZAC des Delaches CS rue Thuillere Villebon Courtaboeuf France Tel: Fax: france@fr.tdk-lambda.com Italy Sales Office Via dei Lavoratori 128/ Cinisello Balsamo (MI) Italy Tel: Fax: info.italia@it.tdk-lambda.com Netherlands info@tdk-lambda.nl TDK-Lambda Germany GmbH Karl-Bold-Strasse Achern Germany Tel: Fax: info.germany@de.tdk-lambda.com Local Distribution TDK-Lambda UK Ltd. Kingsley Avenue Ilfracombe Devon EX34 8ES United Kingdom Tel: +44 (0) Fax: +44 (0) powersolutions@uk.tdk-lambda.com TDK-Lambda Ltd. Kibbutz Givat Hashlosha Israel Tel: Fax: info@tdk-lambda.co.il C.I.S. Commercial Support: Tel: +7 (495) Technical Support: Tel: +7 (812) info@tdk-lambda.ru Austria Sales Office Aredstrasse Leobersdorf Austria Tel: Fax: info.germany@de.tdk-lambda.com Scandinavia Sales Office Valdemarsgade Ringsted Denmark Tel: Fax: info@de.tdk-lambda.com PXF June15 v7 Switzerland Sales Office Bahnhofstrasse Dietlikon Switzerland Tel: Fax: info@de.tdk-lambda.com 5
Input surge voltage (max 3 seconds) 24V Nom : 50VDC 48V Nom: 100VDC
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 6W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low patient leakage 4:1 Wide input range Benefits Easier system approval
Conducted and radiated emissions (Note 4) EN55011, EN55022, Class A and FCC part 18 Immunity (Note 5)
www.emea.tdk-lambda.com/pxc-m Single and Dual Output 3W DC-DC Converters Features 60601-1 approval I/O isolation 5kVAC, 2MOPP 0.25µA low leakage 4:1 Wide input range Benefits Easier system approval Patient
RWS-B Series. 100W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 100W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
RWS-B Series. 50W to 600W Single Output General Purpose Power Supplies. RWS-B Series 1. Specification
RWS-B Series www.uk.tdk-lambda.com/rws-b 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 5 Year Warranty Global Safety Approvals Compact Size Benefits Better Field
DSP Series 7.5W to 100W Low Profile Din Rail Mount Power Supplies
Low Profile for Building Automation 5V to 24V Outputs Wide Range AC Input -25 C to +71 C Operation Convection Cooled UL1310 Class 2 Class II Double Insulation 7.5W to 100W Low Profile Din Rail Mount Power
CUT75 Series. Dual or Triple Output 75W Low Profile Power Supplies. CUT75 Series 1. Specification
CUT75 Series www.emea.tdk-lambda.com/cut Dual or Triple Output 75W Low Profile Power Supplies Features Benefits Triple (useable as dual) output supply Addresses multiple voltage needs in one hit Compact
Operating temperature (2, 3, 5) C -20 C to +70 C ( see derating curves) Storage temperature C -40 C to +85 C
www.uk.tdk-lambda.com/drb 15W to 100W Single Output DIN Rail Mount Power Supplies Features Compact Footprint Efficiency up 91% ErP Compliant Design Benefits Saves Space on Rail & Cabinet Cost Cooler Applications
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification (1)
www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x 4 inch footprint
ZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification
ZMS100 Series www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x
MODEL ZWS50-BAF ZWS75-BAF ZWS100-BAF ZWS150-BAF ZWS300-BAF
ZWS-BAF Series www.uk.tdk-lambda.com/zws-baf 50W to 300W Single Output Power Supplies, Low Cost & High Reliability Worldwide Use Features 10 Year e-cap Lifetime 5 Year Warranty Convection Cooling Benefits
CUS200M Series. Single Output 200 to 250W Medical & ITE Power Supplies. CUS200M Series 1. Specification
CUS200M Series www.emea.tdk-lambda.com/cus200m Single Output 200 to 250W Medical & ITE Power Supplies Features Benefits IEC 1-1 (2x MOPP) & IEC 950-1 Approvals Suitable for B & BF type Medical and ITE
EVS Series. 300 and 600W Constant Current Power Supplies. EVS Series 1. Specification
EVS Series www.emea.tdk-lambda.com/evs 300 and 600W Constant Current Power Supplies Features Benefits 300W Convection cooled and 600W fan model Silent fanless chargers CC (constant current) mode Quick
DIN Rail Power Supplies 10W to 960W
DIN Rail Power Supplies 10W to 960W EN Edition 1 2015 2 Innovative, reliable, powerful DIN rail power supplies from TDK-Lambda deliver the highest quality and performance required for tough industrial
PH-A 280 Series. 50W to 300W DC-DC Converters, Single Output High Density Power Modules. PH-A 280 Series 1. Specification
PH-A 280 Series www.uk.tdk-lambda.com/ph-a 50W to 300W DC-DC Converters, Single Output High Density Power Modules Features High Density Up to 425 Vdc Input Fixed Operating Frequency High Efficiency Certified
Z+ Series. 200W, 400W, 600W and 800W Programmable DC Power Supplies. Z+ Series 1. Model Selector. Minimises system rack height
Z+ Series www.uk.tdk-lambda.com/zplus Features 2U high uilt-in US, RS232 & RS485 Optional LAN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc Arbitrary function generation 5 year warranty
Programmable Power Supplies
Programmable Power Supplies Automotive EMEA - Edition 1 2 Programmable Power Supplies Special models for automotive applications TDK-Lambda s series of programmable DC power supplies offer a wide variety
CUS100ME Series. 2 x 4 100W AC-DC Power Supplies. CUS100ME Series 1. Specification
CUS100ME Series www.emea.tdk-lambda.com/cus100me 2 x 4 100W C-DC Power Supplies Features enefits 100W Convection Rating Quiet Operation 75W With 1m/s irflow at 85 C mbient Suitable for High mbient Temperature
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
UL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
Unit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
HAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
RP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
DH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
RCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option
Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
HBC DC-DC Series Data Sheet 300-Watt Half-Brick Converters
Applications Intermediate Bus architectures Telecommunications equipment LAN/WAN applications Data processing applications Features RoHS lead solder exemption compliant High efficiency up to 94% High power
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
S24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
MPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option
Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP10-48 S 05 W A - P T Name Input Output Output Input Pin Connection Remote On/Off
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/77/76098235.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
RWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
DCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
![Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/82/86441596.jpg "Notes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/80/80466451.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
Power Supplies, DC-DC Converters and EMC/EMI Filters
Power Supplies, DC-DC Converters and EMC/EMI Filters Healthcare EMEA - Edition 1.1 Healthcare Power Supply Solutions. Worldwide. 2 www.emea.tdk-lambda.com TDK-Lambda Corporation, a group company of TDK
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
C B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
FEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
DC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
Model Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power
Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection
Features. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
Series AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
Note1: Efficiency is tested by nominal Vin, full load and at 25 C. Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 1Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 93% No minimum load required EN5155, IEC/EN95-1 & UL95-1
Open Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
DORADO MV DC/DC CONVERTERS 24V Input 12VDC 8A Output
1/4 Brick Dorado MV Series Industry standard pinout and footprint High efficiency: 86% at 12V, 8A; 88% at 12V, 4A Very low common-mode noise for a commercial DC/DC converter Constant switching frequency
DC/DC Converter URF48_QB-75W(F/H)R3 Series
DC/DC Converter 75W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 93% Isolation voltage: 2.25K VDC Input under-voltage
DC/DC Converter URB1D_LMD-10WR3 Series
DC/DC Converter FEATURES 10W, ultra wide input isolated & regulated single output DC-DC converter Ultra wide input voltage range (4:1) High efficiency up to 85% Enhanced isolation, isolation voltage: 2250VDC
Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 91% No minimum load required UL695-1, EN5155 & IEC/EN695-1
Efficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
DEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
Series AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,