Compact catalogue. optibelt ALPHA SPECIAL customised solutions
|
|
- Olivia Powers
- 5 years ago
- Views:
Transcription
1 MATERIAL HANDLING Compact catalogue optibelt ALPHA SPECIAL customised solutions
2 A matter of trust. Paul, 46, Chief engineer POLYURETHANE TIMING BELTS optibelt polyurethane timing belts convince due to their impressive product features. They set standards regarding strength, elongation and wear. The thermal and chemical capacity is exceptional. It is good to know that these benefits are combined with a competent technical service. First class products for flexible drive solutions and conveyance challenges Optibelt is capable of implementing even the most challenging requirements economically. Professionalism you can also benefit from. Engineered in Germany Quality since 1872
3 POWER TRANSMISSION DRIVES 5 MECHANICAL belt joints 26 LINEAR DRIVES 9 ROUND BELTS 28 CONVEYOR DRIVES 11 TIMING BELT PULLEYS 30 POWER TRANSMISSION DRIVES LINEAR DRIVES CONVEYOR DRIVES ALPHA Power ALPHA flex ALPHA linear ALPHA V ALPHA Special ALPHA TORQUE ALPHA SRP endless open-ended endless welded / endless APPLICATION EXAMPLES Machine tools Textile machines Printing machines Packaging machines Office machines Medical devices Robots Handling devices Positioning drives Lifting drives Handling devices Door and gate opening drives Washing bays Plotters Packaging machines Gantry robots Parallel conveyors Synchronous conveyors Inclined conveyors Accumulating conveyors Vacuum conveyors Take-up and transfer units Separators Workpiece positioners
4 4 Belt product range optibelt ALPHA Belt product range PRODUCT GROUPS ALPHA TORQUE ALPHA Power ALPHA SRP Casted, endless ALPHA flex ALPHA linear ALPHA V Extruded, endless Extruded, open-ended Welded, endless BASIC PROFILES Profile, imperial MXL, XL, L (ALPHA TORQUE) PROFILE H XL, L, H, XH XL, L, H, XH Profile T T2.5, T5, T10, T20 DT5, DT10 T5, T10, T20, DT5, DT10 T5, T10, T20 T5, T10, T20, DT5 1, DT10 1 Profile TK, wedge T5K6, T10K6, T10K13 Profile AT AT5, AT10 AT5, AT10, AT20, DAT5, DAT10 Profile ATK, wedge Profile ATL AT5, AT10, AT20 ATL5, ATL10, ATL20 AT5, AT10, AT20, DAT5 1, DAT10 1 AT5K6, AT10K6, AT10K13 Profile HTD 5M, 8M, 14M, D5M, D8M 5M, 8M, 14M, 14ML 5M, 8M, 14M D5M 1, D8M 1 Profile F, flat belts F2, F2.5, F3, FL3 F2, F2.5, F3, FL3 Steel Standard tension Steel Steel cord 2 Steel, high flexible Aramid excluding AT20, 14M, XH, F2.5, F3 Steel, high flexible, excluding imperial profiles, T5, ATL10, AT20, F2.5, F3 Stainless steel excluding L, 5M, 14M, T5, AT5, ATL10, AT20, F2.5, F3 Special tension cords Optionally without coiling sleeve Aramid Steel, high flexible Stainless steel Polyester Aramid Stainless steel On request Double toothed profiles on request 2 and without the according profiles TK, ATK 3 Profile T10 available without coiling sleeve, further profiles on request
5 POWER transmission DRIVES
6 6 power transmission drives optibelt ALPHA TORQUE for power transmission drives Profiles MXL, XL, L, T2.5, T5, T10, T20 Endless, casted optibelt ALPHA TORQUE polyurethane timing belts have the following characteristics: Nominal sleeve height up to 380 mm Belt lengths up to 2250 mm DT2.5, DT5, DT10 Free choice of colour on request Position of the length tolerance field is definable, e. g. for fixed center distances Available profiles single-sided tooth: AT5, AT10, T2.5, T5, T10; T20, MXL, XL, L Double-sided tooth available for profiles DT2.5, DT5; DT10 AT5, AT10 Tension members: steel, high flexible steel, aramid, stainless steel, polyester, Vectran Casting process for optibelt alpha power and optibelt ALPHA TORQUE timing belts
7 power transmission drives 7 optibelt ALPHA Power For high performance power transmission drives Profiles Endless, casted optibelt alpha power polyurethane timing belts have the following characteristics: Optimised properties of the ALPHA Power offer up to 30 % higher power ratings T2.5, T5, T10, T20 Available profiles single-sided tooth: AT5, AT10, T2.5, T5, T10; T20 Double-sided tooth available for profiles DT2.5, DT5; DT10 DT2.5, DT5, DT10 High indexing precision and narrow tolerances Strong adhesion between polyurethane and tension cord Position of the length tolerance field is definable, e. g. for fixed center distances Tension members: steel, high flexible steel, stainless steel AT5, AT10 Casting process for optibelt alpha power and optibelt ALPHA TORQUE timing belts
8 8 power transmission drives optibelt ALPHA flex for power transmission drives Profile H, T5, T10, T20 Endless, extruded optibelt alpha flex polyurethane timing belts have the following characteristics: Length range from approx mm to 22,000 mm DT5, DT10 Belt can be produced in every pitch step within length range Production widths 100 mm or 150 mm Optional with polyamide fabric on the teeth from 1500 mm Direct weld on of cleats and guides possible AT5, AT10, AT20 Optional design includes high flexible or stainless steel tension members Dual cord with S+Z winding of the tension members for lower tracking force Available in profiles H, T5, T10, T20, AT5, AT10, AT20, 5M, 8M, 14M Double-sided tooth available for DT5, DT10, DAT5, DAT10, D5M, D8M DAT5, DAT10 5M, 8M, 14M D5M, D8M Concept of the optibelt alpha flex timing belt with dual (S+Z) tension members and extruded polyurethane
9 LINEAR DRIVES
10 10 LINEAR DRIVES optibelt ALPHA linear FOR LINEAR DRIVES Profiles XL, L, H, XH, T5, T10, T20 OPEN-ENDED, EXTRUDED optibelt ALPHA LINEAR POLYURETHANE TIMING BELTS HAVE THE FOLLOWING CHARACTERISTICS: AT5, AT10, AT20, ATL5, ATL10, ATL20 High tension force with low elongation High positioning accuracy Optional design includes high flexible steel, aramid and stainless steel tension members Timing belts for linear drives in profile ATL Available with polyamide fabric layers on the teeth and / or the belt top surface 5M, 8M, 14M, 14ML PU optionally with FDA / EU approval for direct contact with food Optional with thicker belt back, T2, PU foam yellow and APL plus Optional colours available F2, F2.5, F3, FL3 Roll lengths 50 m or 100 m, > 100 m available on request Available in profiles XL, L, H, XH, T5, T10, T20, AT5, AT10, AT20, ATL5, ATL10, ATL20, 5M, 8M, 14M, 14ML, F2, F2.5, F3, FL3 Design of the optibelt ALPHA LINEAR timing belt with parallel tension cords and extruded polyurethane
11 CONVEYOR DRIVES
12 12 conveyor drives optibelt ALPHA SRP for conveyor drives process of extrusion Casting CHARACTERISTICS OF THE CASTed optibelt ALPHA SRP WITH CLEATS: easy production of small belts with cleats through moulding process Large number of cleats within the narrowest space excellently formed, precisely shaped cleat geometries due to cast polyurethane process Reproducible high precision High stability of the cleat on the base belt due to homogeneous compouding optibelt ALPHA SRP timing belts with cleats process of centrifugal Casting CHARACTERISTICS OF THE CASTed optibelt ALPHA SRP WITH dual layer polyurethane backing: Production of small coated timing belts or flat belts by moulding process Backings without joints Highly stable production process High stability of the adhesion between backing and base belt due to homogeneous compouding optibelt ALPHA SRP timing belts with dual layer backing The optibelt ALPHA SRP is based on the belt designs of the optibelt ALPHA Power or optibelt ALPHA TORQUE timing belt range. Further designs on request.
13 conveyor drives 13 optibelt ALPHA V for conveyor drives Profiles XL, L, H, XH, T5, T10, T20 WELDED optibelt ALPHA V POLYURETHANE TIMING BELTS HAVE THE FOLLOWING CHARACTERISTICS: Minimum belt length ranges from 400 mm to 1200 mm Belt lengths available in every pitch step Low-priced and quick availability AT5, AT10, AT20 Ideal for transport drives Available with polyamide fabric on the teeth and / or on the belt top surface PU optionally with FDA / EU approval for direct contact with food Optional with thicker belt back, T2, PU foam yellow and APL plus Strong bonding of cleats and guides 5M, 8M, 14M, 14ML Despite discontinuous tension members approx. 50 % shear resistance versus the endless timing belts Available in profiles XL, L, H, XH, T5, T10, T20, AT5, AT10, AT20, 5M, 8M, 14M, 14ML, T5K6, T10K6, T10K13, AT5K6, AT10K6, AT10K13, F2, F2.5, F3, FL3 T5K6, T10K6, T10K13 AT5K6, AT10K6, AT10K13 F2, F2.5, F3, FL3 Finger-shaped punched-out belt ends and welded optibelt ALPHA V timing belt
14 14 ALPHA Special WITH COATINGS WITH MECHANICAL PROCESSING WITH CLEATS
15 optibelt ALPHA Special WITH COATINGS APL plus New! Despite other PVC foils, this coating is applied on the optibelt ALPHA LINear directly during the extrusion process; Welding to form optibelt ALPHA V in combination with the coating is possible jointless; completely adhesive; easy and cost-effective coating for conveyance. TIMING BELTS WITH COATINGS optibelt ALPHA SPECIAL are value-added with a coating on the belt top surface and can be mechanically processed. The wide range of coatings and forward machining options combined with the features of the timing belt allow for the development of innovative solutions for transport purposes.
16 16 conveyor drives Overview coatings, mate CHaracteristics FOAM POLYURETHANE (PU) Sylomer R (see picture) Sylomer L Celloflex Sylomer M PU-foam yellow PU 06 RUBBER Porol (see picture) EPDM with profiles or structures Polyurethane (PU) PU longitudinal groove (see picture) Pointed cone PU longitudinal groove fine PU-spike profile Pebbles rounded cone RUBBER Supergrip black (see picture) Supergrip blue Polyvinylchloride (PVC) PVC shark tooth (see upper picture) PVC longitudinal groove Supergrip petrol blue Supergrip green Supergrip white (see picture below) Minigrip petrol blue Minigrip green PVC cleats PVC fishbone pattern PVC saw tooth PVC triangular profile
17 conveyor drives 17 rial and surface SMOOTH OR SLIGHTLY STRUCTURED POLYURETHANE (PU) PU foil 65 Shore A Polythane D15 Polythane D44 PU foil blue PU foil 85 Shore A T2 (see picture) PU foil 92 Shore A Higher back RUBBER RP 400 (see picture) Correx beige Linatex Linaplus FGL NG red Linatrile Elastomer green POLYVINYLCHLORIDE (PVC) PVC foil petrol blue (see picture) PVC foil green PVC foil blue PVC foil white APL plus PVC pepita PA FABRIC PA fabric (see picture) PA fabric anti static Special PTFE (see upper picture) TT60 Para flees Chrome leather (see picture below) Viton
18 18 conveyor drives OPTIBELT EXTRACT FROM STANDARD COATINGS Picture of the coating Name, colour, material Standard thickness s [mm] Hardness / density Temperature resistance Minimum pulley Ø [mm] Slaving capacity Abrasion resistance Sylomer L, green, PU foam s kg/m 3 30 C C Ø Slaving Abrasion resistance PU 06, yellow, fine pored PU s Shore A 10 C C Ø Slaving Abrasion resistance PU foil 85 shore a, transparent, PU s Shore A 10 C C Ø Slaving Abrasion resistance Linatex, red, natural rubber s Shore A 40 C C Ø Slaving Abrasion resistance PU longitudinal groove, fine, transparent, PU s Shore A 10 C C Ø 70 Slaving Abrasion resistance Supergrip petrol blue, polyvinyl chloride s Shore A 10 C C Ø 60 Slaving Abrasion resistance APL plus, red, elastic PVC s Shore A 20 C C Ø Slaving Abrasion resistance
19 conveyor drives 19 optibelt ALPHA Special WITH MECHANICAL PROCESSING Milled shapes MECHANICAL PROCESSING Additional geometrical and dimensional adaptations of standard timing belts, coated belts and belts cleats extend the application options. The following processes are available for forward machining: Carved coating Grinding Milling Water jet cutting Punching Drilling Cutting, Carving Longitudinal groove in the teeth Punched timing belt
20 20 conveyor drives optibelt ALPHA Special WITH CLEATS TIMING BELTS WITH CLEATS Cleats can be additionally applied on optibelt ALPHA Linear, optibelt ALPHA V and optibelt ALPHA FLEX timing belts via various processes. These include welding, chemical bonding and mechanical connections. The in-house injection moulding process ensures good product availability. In case you cannot find the suitable cleat in our product range, we can produce or adapt it according to your requirements in a cost-effective way. We will be pleased to support you in finding the suitable solution for your transport tasks. Cleats including punched holes with attachments for tool carriers
21 conveyor drives 21 optibelt ALPHA Special WITH CLEATS Available standard polyurethane cleat materials: PU 92 Shore A, white PU 65 and 85 Shore A, transparent PU 98 Shore A, greyish white In contrast to coatings with frictional connection, cleats allow for a synchronous traction of the goods to be conveyed in conveyor drives. Furthermore, they e. g. convey the goods in longitudinal direction and / or sideways and align them if necessary position goods on the conveyor belt separate the goods allow for high acceleration and / or high speeds synchronise the goods to be conveyed with the belt The Optibelt cleat range offers a great number of cast blanks and cleats which can directly be used for many different applications. In case none of these cleats are suitable, an appropriate cleat can be produced by adapting the present cleat via mechanical processing by producing an appropriate cleat in a customised injection mould The production in a dedicated injection mould is suitable for simple cleat shapes in medium volumes and for more com - plex shapes in small volumes. It can be carried out in the company s own tool shop. PU FDA 85 Shore A, transparent / blue GFK (PU) Further materials and colours available on request Cleats as workpiece carriers Parallel conveyor with supporting table simple Shape and function of the cleat special rectangle round T-shaped L-shaped blades trapezoidal shape V-trapezoidal shape triangle concave, convex groove holes inserts
22 22 conveyor drives optibelt ALPHA Special CUSTOMISED SOLUTIONS The processing of PU timing belts is one of our specialities. Due to many years of experience we develop optimum solutions for special applications of our customers in the segments of conveyance, food, packaging, glass, wood, linear drives and medical applications. All product groups of endless and joined belts can be used for conveyance. Examples of applications are: parallel and synchronous conveyors, inclined conveyors, accumulating conveyors, vacuum conveyors, separators or workpiece postioners, exhaust units The base belts which were selected according to the requirements can be adapted to the special type of conveyance if necessary via coatings and /or cleats The base belt, the coating and the cleat can all be additionally adapted in geometry and dimension via mechanical processing. These forward machined special belts are labelled special in addition to their actual product group name. Example: The product group name of an endless welded optibelt ALPHA V polyurethane timing belt with additional coating is changed to optibelt ALPHA V Special. Coated timing belts have the following characteristics: Improved chemical resistance, e. g. for applications in food industry High abrasion resistance, e. g. accumulation conveyors High temperature resistance, e. g. for the conveyance of heat treated parts Good cut resistance, e. g. for sharp-edged goods to be conveyed Non-stick, e. g. for contact with adhesives Antistatic, e. g. for the conveyance of electronic parts Absorption of shocks, e. g. when placing sensitive goods
23 conveyor drives 23 optibelt ALPHA Special APPLICATION EXAMPLES Picture 1: customised solution for the conveyance of semi-finished goods The example given in picture 1 presents a customised solution for the conveyance of semi-finished products. In this particular case, an optibelt ALPHA V AT20 ST was coated with the coating material Sylomer L, green, PU foam. Afterwards, grooves and holes were cut out via water jet, and vacuum pockets were milled with an NC milling machine. With such belt the semi-finished products can be conveyed on to further processing steps via vacuum technology. For a special machinery manufacturer OPTIBELT has deve - loped a solution (see picture 2), for the conveyance of cuton-demand material (pipe, square and rectangular profiles) without changing the belt type. Furthermore, a slipping of the cutted material due to the startstop-frequency has to be prevented. The belts (depending on the number of pieces 4-6 belts) do run synchronously in parallel depending on the lengths of the cutted profile. The belt back is equipped with foam profiles (Sylomer R, blue, PU foam) and PU cleats in order to ensure a conveyance with exact positioning of the individually cut profiles. Picture 2: Customised solution for the conveyance of cut material The customised solution shown in picture 3 was ordered by a customer from the pet / animal food industry in order to convey empty pet / animal food packaging to filling stations. The belt back was coated with a natural rubber (RP 400, yellow) and equipped with cleats. The welded cleats have an additional glass fibre reinforced protective layer in order to counter the high shear forces of the sharp-edged pet / animal food packaging. Furthermore, the cleats ensure an exact positioning of the goods to be conveyed. Picture 3: customised solution for the conveyance of pet / animal food packaging
24 24 Timing Belts for the Packaging Industry TIMING BELT PACKAGING TIMING BELTS FOR TUBULAR BAG PACKAGING MACHINES All rubber and polyurethane timing belts of the OPTIBELT product portfolio can be provided with various coatings for use in tubular bag packaging machines. With the aid of these timing belts, the foil that was previously sealed in longitudinal direction forming a tube is withdrawn from a filling tube. Due to an additional sealing in transverse direction, a bag is produced that can then be filled. Such a bag is sealed completely by another transverse seal. This system is used globally in the food and non-food sector. From potting soil over frozen products up to salad, consumer products are packed in this manner every day. In this area, the optibelt ALPHA Special discharge belts with and without vacuum support have proven successful, with common profiles such as T10, L and H being available in various length ranges.
25 Timing Belts for the Packaging Industry 25 S FOR THE INDUSTRY One particular feature are the rubber timing belts with special coatings. These are produced on the basis of the base belt in a vulcanization process, with the applied coating neither exhibiting a bonding or a joint. The materials used are Red Rubber 40 and silicone rubber. However, also Linatex and other rubber types can be applied subsequently with a joint on the belts. In addition, polyurethane coatings e.g. with PU 06 foam, yellow are possible. The requested material is likewise applied subsequently or by endless spraying. However, if higher cycle times are used for the packaging machines, timing belts with vacuum support are the suitable choice. OPTIBELT offers various variants and designs of the tooth-sided grooves and vacuum recesses.
26 26 MecHanical connections mechanical BESIDES THE TIMING BELT joint ZS / ZSi, CONNECTIONS HAS BEEN EXTENDED BY TIMING BELT joint ZS AND ZSi THE TIMING BELT joint ZS / ZSi IS DESIGNED FOR THE REPEATED DETACHING AND joining OF timimg BELTS IN THE application. Both designs are available in stainless steel for the profiles AT10 and H ex stock. Thus, this connection can be used in combination with the suitable timing belts in the food and pharmaceutical industry. For the profile T10 the inserts for the toothed side are made of brass which is not suitable for the application in the food and pharmaceutical industry. The back plates are connected with the inserts on the toothed side via bolts that are screwed on through the belt. The belt back of the design ZSi is 1 mm higher so that the back plates are enbedded into the timing belt and end at the height of the belt back. The standard widths belt joints for the profiles AT10 and T10 are 25; 32 and 50 mm, and for the H profile 25.4; 38.1 and 50.8 mm. Further intermediate widths and width exceeding 50 mm on request.
27 MecHanical connections 27 TIMING BELT joints THE RANGE OF MECHANICAL THE Version PINJOIN TIMING BELT joint PINJOIN THE TIMING BELT joint PINJOIN IS Designed for a singular connection of timing belts directly into the application on site. The belt is joined via threaded pins made of stainless steel in cross holes all through the tooth. Thus, this connection can be used in combination with the suitable timing belts in the food and pharmaceutical industry. The pinjoin connection is also suitable for the connection of coated belts. In the spot of the connection, however, the coating is bluntly placed face to face. The standard width ranges of lock connections for the profile AT10 are 25, 32 and 50 mm. Further profiles, intermediate widths and width exceeding 50 mm on request.
28 28 RoUND belts optibelt RR / RR Plus polyurethane RoUND belts optibelt round belts consist of high quality materials which are produced as openended rolls in different diameters from 2 mm to 20 mm in special production processes. The design optibelt RR Plus is equipped with an additional polyester tension cord. CHARACTERISTICS Advantageous friction coefficient Good skid resistance during conveyance Good wear and abrasion resistance High elasticity, good absorption High tensile strength Colour proof, leaves no stains Resistant against grease, oil and various chemical UV and ozone resistant In the design optibelt RR Plus extremely low stretch ADVANTAGES Welding on the spot, also in design optibelt RR Plus No disassembly of the drive / shafts Quick breakdown elimination Short downtimes Simple storage (on rolls) Immediately available Diverse construction designs, as every desired length can be produced optibelt RR ROUND BELTS ARE MAINLY USED IN transport SYStems, E. G. FOR THE CONVEYAnCE OF: Tiles, plates, flat glass Veneers in wood processing Roof tiles, marble, concrete slabs Cardboard conveyance in the packaging sector Also as guiding belts for the conveyance of bottles and cans optibelt RR Plus is especially suitable for use in long conveyors
29 RoUND belts 29 shore A 82 YELLOW Application: for small deflecting pul - leys, flexible at low temperatures, very elastic quality, low power transmission capability. shore A 85 LIGHT BLUE FDA Application: food industry for direct contact with food. shore A 88 GREEN (SMOOTH / ROUGH) Application: in all areas with medium loads; the rough surface design offers advantages for the conveyance of wet or greasy products plus the slaving effect is optimised. shore A 92 WHITE Application: for medium to heavy loads; the design white still offers enough flexibility. For continuous operation even at higher temperatures. shore A 98 BLUE Application: especially for extreme loads and high temperatures; very strong quality, please respect the minimum pulley diameter by all means. shore A 65 BLACK Application: for special applications, belt diameters from 5 mm to 12 mm available, very flexible at low temperatures, extremely soft material.
30 Timing belt pulleys STANDARD-Timing belt pulleys Timing belt pulley according to draft
31 Timing belt pulleys 31 optibelt ZRS STANDARD TIMING BELT pulley pre-bored Profile width code number of teeth XL L H XH Standard timing belt pulley with cylindrical drilled hole Profile belt width [mm] number of teeth 5M M M Profile belt width [mm] number of teeth T T AT AT
32 32 timing belt pulleys optibelt ZRS STANDARD timing belt pulleys for taper bushes Profile belt width [mm] number of teeth 5M M M Taper bushes Standard timing belt pulley with taper bushes Profile width code number of teeth L H XH
33 Timing belt pulleys 33 Timing belt pulley according to draft CUSTOMISED SOLUTION 50 Ø Profile: T5 Number of teeth: z = 40 Pitch: 5 Tolerance band: 0,05 R R ,05 A A (1:1) 8 JS9 / A Ra x 45 A A Ra1.6 1 x Ø25 G D-view M 1:2
34 34 ONLINE TOOL optibelt ONLINE CLEAT SELECTOR FINDING THE RIGHT CLEAT With an online tool, OPTIBELT now enables the quick and clear access to its comprehensive cleat range. Using this cleat selector, customers can select their individual transport solution from a standard spectrum of more than 400 different cleat shapes, specifically for their application, or adjust them subsequently to their requirements. In the selection mask of this online tool, the most important base data regarding shape, material and dimensions of the cleats can be accessed. After that, each hit with the associated information can be downloaded free of charge as PDF or CAD file. DATA SHEET SELECTOR CURRENT DATA SHEETS ON DEMAND The data sheet selector allows a quick and clear online access to data sheets of the OPTIBELT product groups optibelt ALPHA TORQUE, optibelt ALPHA POWER, optibelt ALPHA FLEX, optibelt ALPHA LINEAR and optibelt ALPHA V. By selecting the base belts, profiles and tensile reinforcements, the corresponding data sheet for the timing belt can be found. The data sheet does not only include the most important base data of the belts, but also relevant design data, such as minimum diameter for pulleys and idlers. Each data sheet can then be downloaded free of charge as PDF file. PRICE CALCULATOR QUICK COST SUMMARY With the aid of the price calculator, the prices of the standard products optibelt ALPHA FLEX, optibelt ALPHA LINEAR and optibelt ALPHA V of the segment OPTIBELT Material Handling can be inquired quickly and easily online. Depending on the selected base belt with the requested profile, it is displayed which tensile reinforcements are available and which fabric combinations are possible. Based on this, the prices for the suitable drive solutions can be calculated specifically. After that, a corresponding, official quotation indicating price and delivery time may be requested.
35 35 Sole and exclusive holder of all copyright and usage rights as well as other rights of usage and exploitation: Arntz Optibelt Group, Höxter / Germany. Any type of use, reproduction or any exploitation or passing on to third parties requires the previous written approval of the Arntz Optibelt Group, Höxter / Germany. Revision 6, Print: /0815Hux
36 optibelt MaTerIal handling Gmbh im emerten 11 T + 49 (0) Rinteln f + 49 (0) GeRMAny e info-omh@optibelt.com
POLYURETHANE TIMING BELTS OPTIBELT-USA.COM
POLYURETHANE TIMING BELTS 800-292-6081 OPTIBELT-USA.COM OPTIBELT s quality ensures our operations always run their best. Paul, 46, Chief Engineer OPTIBELT polyurethane timing belts prove their value because
More informationmaterial HaNDlINg CompaCt Catalogue
MATERIal HANDLING Compact catalogue A matter of trust. Paul, 46, Chief engineer POLYURETHANE TIMING BELTS optibelt polyurethane timing belts convince due to their impressive product features. They set
More informationMATERIAL HANDLING. optibelt ALPHA SPECIAL customised solutions
MATERIAL HANDLING Compact catalogue optibelt ALPHA SPECIAL customised solutions A matter of trust. Paul, 46, construction foreman POLYURETHANE TIMING BELTS Polyurethane timing belts are convincing due
More informationTECHNICAL PRODUCT INFORMATION. optibelt ALPHA. For drive solutions with polyurethane Optibelt timing belts
TECHNICAL PRODUCT INFORMATION optibelt ALPHA For drive solutions with polyurethane Optibelt timing belts optibelt ALPHA for drive performance Optibelt ALPHA timing belts are manufactured in moulds and
More informationMATERIAL HANDLING FOOD & BEVERAGE
MATERIAL HANDLING FOOD & BEVERAGE PRODUCTS SPECIALISTS Always a clean solution. Paul, 46, head of engineering design PU konform nach EU-Verordnung 10/2011 und FDA IN WORLDWIDE USE As an experienced partner
More informationPOWER TRANSMISSION TEXTILE
POWER TRANSMISSION TEXTILE PRODUCTS SPECIALISTS So that everything runs smoothly. Norbert, 42, foreman IN WORLDWIDE USE The modern textile industry offers an enormous band width, not only in relation to
More informationRydell. Product Range. Polyurethane timing belts. Rydell Industrial (Belting) Co.
Polyurethane timing belts Product Range Rydell offers the most comprehensive range of polyurethane timing belts available to satisfy all industry requirements. www.rydell.com.au Endless Belts R Gates Synchro-Power
More informationPACKAGING POWERING GLOBAL INDUSTRY
PACKAGING POWERING GLOBAL INDUSTRY Packaging industry The Megadyne Group is a worldwide leader in the development, manufacture, fabrication and distribution of rubber timing and V-Belts, Polyurethane synchronous
More informationThe new standard easy drive The catalog 2015
The new standard easy drive The catalog 2015 Table of contents Introduction Table of contents 2 Foreword 3 Introduction 4-7 Online configurator 8-9 Timing belt easy drive Polyurethane General 10-11 Profiles
More informationCONVEYOR BELTS REACH ROHS. Process and conveyor belts are composite products made of high-quality fabrics and various coating materials.
CONVEYOR BELTS CONVEYOR BELTS Process and conveyor belts are composite products made of high-quality fabrics and various coating materials. The combination of these materials results in a variety of belts
More informationTiming Belts Our product range
GB Timing Belts Our product range» Standard program» Production engineering» Joint techniques» Cleats» V-guides» Special surface coating» Sprockets» Tools 02 03 Bode Belting More than 30 years experience
More informationoptibelt ALPHA TORQUE
t Profiles: ß s ht h s T2.5, T5, T10, MXL, XL, L t Profiles: ß h t h s AT5, AT10 s optibelt ALPHA TORQUE POLYURETHANE TIMING BELTS ß s s ß t t h t h t h s1 Profiles: DT5, DT10 maintenance-free, with steel
More informationThe new standard. easy drive The catalog
The new standard easy drive The catalog Table of contents Introduction Table of contents 2 Foreword 3 Introduction 4-7 Online configurator 8-9 Timing belt easy drive Polyurethane General 10-11 Profiles
More informationHEADQUARTERS TIMING BELTS AND PULLEYS AND PRODUCTION PLANTS CHIORINO
Timing belts R 2 CHIORINO S.p.A. founded in Biella in 1906 is an international leading company in the full-cycled production of conveyor and transmission belts. During January 2011 CHIORINO S.p.A. started
More informationRPP Rubber Chain 85 RPP Rubber Chain Double Sided 90 RPP Rubber Chain Blue 93 RPP Rubber Chain Yellow 97 RPP Rubber Chain Red 100 Imperial Timing
T I M I N G B E LT S RPP Rubber Chain 85 RPP Rubber Chain Double Sided 90 RPP Rubber Chain Blue 93 RPP Rubber Chain Yellow 97 RPP Rubber Chain Red 100 Imperial Timing Belts 102 Imperial Timing Belts Double
More informationmaterial handling optibelt rr / rr Plus / hrr
material handling optibelt rr / rr Plus / hrr Page 2 optibelt rr / rr Plus round belts 82 yellow For use with small idler pulleys; fl exible at low temperatures; very elastic; low power transmission capacity
More informationTIMING BELT BACKINGS
The World Leader In Polyurethane Timing Belts TIMING BELT BACKINGS Materials and Characteristics B208 SUPERIOR TIMING BELT BACKINGS Strength and Flexibility To meet the needs of your specific application,
More informationOPTIbELT TECHNICAL MANUAL RUbbER TIMINg belt DRIvEs
OPTIBELT products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationMcKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements.
McKenzie Handling Systems has been designing and manufacturing standard and custom belt conveyors since its incorporation in 1985. Belt types for all your applications Permanently Sealed Bearings T-slots
More informationHTD - Timing Belt Drives. Mustang Speed Mustang Torque
HTD - Timing Belt Drives Mustang Speed Mustang Torque SIT Timing Belt Drives SIT Timing belts are modern drive elements made of high-quality materials and produced according to the latest manufacturing
More informationTIMING BELTS TIMING BELTS
TIMING BELTS TIMING BELTS TABLE OF CONTENTS COMPANY Table of contents 2 Company 3 Timing belts Polyurethane open-ended/endless General 4-5 Profiles 6 Versions 7 Pitches 8 Technical data T-pitch 9 AT-pitch
More informationSynchro-Power. Open-end and endless polyurethane synchronous belts. First class performance on both power transmission and linear applications
E2/20133 Synchro-Power Gates Synchro-Power polyurethane belts provide maximum power transmission combined with perfect tooth meshing and tight and accurate tolerances. Polyurethane is extremely wear and
More informationTORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
More informationThe new standard easy drive The catalog 2019
The new standard easy drive The catalog 2019 Table of contents Foreword Table of contents 2 Foreword 3 Introduction 4-7 Online configurator 8-9 Timing belt easy drive Polyurethane General 10-11 Profiles
More informationProducts & Applications. CarPOWER. Drive solutions with Optibelt
Products & Applications CarPOWER Drive solutions with Optibelt optibelt CarPOWER High technology from original equipment manufacturer! Ribbed Belts RBK Timing Belts ZRK V-belts MARATHON 1 Repair Sets KIT
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationLONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
More informationProducts Media No HabaSYNC Timing Belts. Habasit Solutions in motion
Products Media No. 4107 HabaSYNC Timing Belts Habasit Solutions in motion Contents 2 Contents 2 Introduction HabaSYNC Timing Belts 3 Industries Served 4 Application Examples 5 Application Designs and Layouts
More informationTension Cords. HPL high performance cords: the cord cross section is increased compared with standard. This results in a lower belt
www.sitspa.com ELATECH M and V The timing elts manufactured y ELATECH have een designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications
More informationTiming Belts. Economical means to transfer power Meshing between belt teeth and those of the sprocket Clean No slip characteristic.
Timing Belts Timing Belts Economical means to transfer power Meshing between belt teeth and those of the sprocket Clean No slip characteristic. Origins of the Timing Belt Trapezoidal profile developed
More informationDELIVERY PROGRAMME Weldable conveyor belting made of Polyurethane and Polyester as well as welding instruments and joining tools
DELIVERY PROGRAMME Weldable conveyor belting made of Polyurethane and Polyester as well as welding instruments and joining tools The specifications in this catalogue are based on our current knowledge
More informationTOP DRIVE - HTD - CHD 3M - 5M - 8M - 14M APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. Office-ATM machines
TOP DRIVE - HTD - CHD Performance index TOP DRIVE HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050. This profile has been used for many
More informationProducts Media No HabaSYNC Timing Belts. Habasit Solutions in motion
Products Media No. 4107 HabaSYNC Timing Belts Habasit Solutions in motion Contents 2 Introduction 3 Available options 4 Industries we serve 5 Needs and solutions 6 Covers 7 Belt attachments 8 Modifications
More informationSIT Power Transmission, a history of passion and technology
SIT Power Transmission, a history of passion and technology SIT S.p.A., a core member of the Scaglia Group which was founded nearly 200 years ago in Bergamo Italy, has a 50 years history dedicated to manufacturing
More informationUrethane Timing Belts and Pulleys
Urethane Timing Belts and Pulleys Gates Mectrol Passion for Products OUR EXPERTISE Gates Mectrol is a global manufacturer of belting and other automation components to the material handling industry. Our
More informationTension Cords. HPL high performance cords: the cord cross section is increased compared with standard. This results in a lower belt
www.sitspa.com ELATECH M and V The timing elts manufactured y ELATECH have een designed to comply with every need of the design engineer in linear motion, power transmission and in conveying applications
More informationURETHANE PRODUCT GUIDE POWERING GLOBAL INDUSTRY
URETHANE PRODUCT GUIDE INTRODUCTION ABOUT US URETHANE ING Megadyne, headquartered in Mathi Italy, is a global manufacturer of urethane timing belts. Megadyne was started in 1957 when Mr. Corrado Tadolini
More informationBRECO, BRECOFLEX timing belts. Timing belt types AT-DL BAT BATK
BRECO, BRECOFLEX timing belts Timing belt types Properties Mechanical Positive fit, synchronous run Constant length, no post-elongation Low noise Wear resistant Low-maintenance Highly flexible Positional
More informationInstallation Tensioning Procedure
Contents PARTICULARS Introduction PIX X treme HTD Belts Construction Features Designation Pitch range Length range Pulley Dimensions Length tolerances Width tolerances PIX X treme Classical Belts Construction
More informationMain features: All the Megablue product line is FDA/USDA/USDA Dairy Approved.
MEGABLUE Megablue Megablue is Megadyne s product, specifically created to give a good alternative to the classical plastic modular belt for the food processing industry. This product, with its smooth surface,
More informationTiming Belt Design Hints A guide to Timing Belt drives
Timing Belt Design Hints A guide to Timing Belt drives Properties This table is provided to assist in specifying an Optibelt drive element for a particular drive application. Ambient temperature Maximum/minimum
More informationOPTIBELT PRODUCT RANGE
OPTIBELT PRODUCT RANGE OVERVIEW OF ALL PRODUCTS VERSION 1 / 2013 INCLUDING PULLEYS AND BUSHES Page 2 HigH-TECH machinery REQUiRES HigH-TECH DRiVE TECHnOLOgY. Since 1948 the OPtibelt company has been manufacturing
More informationProduct range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
More informationAUTOMOTIVE & TIRE PRODUCTION LINE ADVANCING DRIVE TECHNOLOGY
AUTOMOTIVE & TIRE PRODUCTION LINE ADVANCING DRIVE TECHNOLOGY Automotive & tire production line The Megadyne Group, founded almost 60 years ago, is a global organization specializing in the development
More informationGatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
Gary L. Miller Plant Engineering November 7, 1991 DIFFERENCES IN SYNCHRONOUS BELTS All toothed belts are not the same; subtle differences in tooth profiles and construction affect performance. Synchronous
More informationTurcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,
More informationELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3
ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationCatalog POWER TRANSMISSION BELT R TEK INTERNATIONAL. 214 Martin Dr, Wylie, Texas, 75098, USA
ADD: 214 MARTIN DR, WYLIE, TEXAS, 75098, USA TEL: +1 (817) 808 6335 FAX: +1 (817) 290 0537 EMAIL: info@rtekindustrial.com WEB: http://www. rtekindustrial.com 2009 2010 Catalog POWER TRANSMISSION BELT R
More informationPOWER TRANSMISSION OIL & GAS
POWER TRANSMISSION OIL & GAS PRODUCTS SPECIALISTS For trouble-free operations. Norbert, 42, engineer WORLDWIDE PARTNER Optibelt provides its customers and corporate partners with engineered drive solutions
More informationSYNCHRONOUS BELT DRIVES SYNCHRONOUS BELT DRIVES
Section SYNCHRONOUS BELT DRIVES This state of the art, integrated r a ng e o f s y n c h ro n o u s b e l t drive components is capable of meeting almost any applicational requirement. Comprehensive range
More informationPRODUCTS AND APPLICATIONS AGRO POWER
PRODUCTS AND APPLICATIONS AGRO POWER AGRO POWER V-belts Kraftbands Ribbed belts Variable speed belts Owner of any and all copyrights and intellectual property rights as well as other rights of use and
More informationPOSITIVELY DRIVEN CONVEYOR BELTS
CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive
More informationCONTI SYNCHROBELT and CONTI SYNCHROFORCE CXP III double-sided timing belts
ContiTech Power Transmission Systems ContiTech Group of Continental AG for synchronous power transmission on both sides Throughout the field of mechanical drive engineering high demands are made on the
More informationgrupo peosa
EN grupo peosa www.siban.com GRUPO PEOSA GRUPO PEOSA consists of various companies which manufacture technical rubber products intended for different industrial, marine and mining areas: SIBAN PEOSA, S.A.U.
More informationPOWER TRANSMISSION LAWN & GARDEN
POWER TRANSMISSION LAWN & GARDEN SPECIALISTS For a well-kept garden. Norbert, 42, landscape gardener USED WORLDWIDE As a strong partner in the field of grounds maintenance, Optibelt offers numerous drive
More informationDRB Power Transmission Belts
DRB DRB power transmission belts, essential for transferring power of all automotive, industrial and agricultural machines all over the world, have been accepted by customers as a pronoun for quality and
More informationTiming Belts
Timing Belts www.medway-uk.com 1 Timing Belts Imperial Product Description The MEDWAY classical timing belt (synchronous) has a trapezoidal tooth profile providing a positive drive by the meshing of belt
More informationRubber V-BELTS LINEA-X ESAFLEX VARISECT XDV2 CONTRAFOR PLURIBAND
MEGADYNE Rubber ISORAN TIMING BELTS Rubber Timing belts are available in single or double sided version, in classical pitches and RPP profiles. A large range of products available from stock. MXL - XL
More informationProduct range Power transmission belts
Product range Power transmission belts flat belts Siegling total belting solutions 2 Siegling Extremultus exceptional power transmission Contents We have developed the Siegling Extremultus power transmission
More informationBELT DRIVES BELT DRIVES. the mark of engineering excellence
BELT DRIVES BELT DRIVES TS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS GEARED DRIVES BELTS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS the mark of engineering excellence the mark of engineering
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationATLATOS THE TiMiNG BELT
ATLATOS THE TiMiNG BELT ATLATOS THE product OF Our TEAM ATLATOS is not just any timing belt. ATLATOS is aiming to be the best quality timing belt for the best price on the market. This is based on a simple
More informationBELTS BELTS V-BELTS SYNCHRONOUS BELTS IMPORTANT REMINDER
IMPORTANT REMINDER When using ARAMID FIBER REINFORCED (KEVLAR) be sure NOT to tension at higher force than recommended for standard conventional construction belts. Specially designed sheaves may be required
More informationYour partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making Picture on front page: By kind permission of Werk5 GmbH,
More informationREMAWELL. REMA TIP TOP Sidewall Conveyor Belts
REMA TIP TOP Sidewall Conveyor Belts REMAWELL Industrie Chemische Beständigkeitsliste Chemical resistance chart Tableau de résistance chimique Tabla de resistencia quimica Industrie Service and maintenance
More informationUrethane Timing Belts and Pulleys
Urethane Timing Belts and Pulleys Gates Mectrol Passion for Products OUR EXPERTISE Gates Mectrol is a leading manufacturer of synchronous timing belts, timing pulleys and other polymer based automation
More informationprofile depth: 0.2 mm 2.6 mm 1.9 mm maximum width: 2200 mm 1950 mm 1150 mm further information: - - pitch 16 mm, ribs square, 2 mm wide
1 On the basis of its many years interaction with engineers and end users, Fogarty Belting has developed a comprehensive range of profiled belts, capable of meeting all the requirements of industry with
More informationDECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING CONSULTANCY, DESIGN, PRODUCTION, AFTER-SALES SERVICE CONTENT 03 Consultancy, design, production, after-sales service 04 Strip decoiling,
More informationGeneral Catalogue. Products line 2017/C.2_ENG
General Catalogue Products line 2017/C.2_ENG Edition 2017/C.1_ENG March 28th 2017 All the technical data are updated to the date of publication. All texts, charts and illustrations of this document are
More informationCONVEYING BELTS FOR AUTOMOTIVE THE SUSTAINABLE COMPONENT FOR THE TRANSPORT IN THE VEHICLE ASSEMBLY
CONVEYING BELTS FOR AUTOMOTIVE THE SUSTAINABLE COMPONENT FOR THE TRANSPORT IN THE VEHICLE ASSEMBLY WE THE TEAM OF STRICKER STAND FOR: professional consultation CONFIDENT CONVEYING ECONOMICAL CONSUMPTION
More informationProducts & Applications SERVICE TOOLS. Drive solutions with Optibelt
Products & Applications SERVICE TOOLS Drive solutions with Optibelt optibelt TT 3 Frequency tension tester for the universal measurement of tension of V-belts, timing belts and ribbed belts The Optibelt
More informationPOSITIVELY DRIVEN CONVEYOR BELTS
CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive
More informationGeneral information on radial seals
170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either
More informationINDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
More informationGatesFacts Technical Information Library Gates Compass Power Transmission CD-ROM version 1.2 The Gates Rubber Company Denver, Colorado USA
Timing Belt Selection And Troubleshooting David E. Roos Maintenance Technology September 1989 Evenly spaced teeth on the bottom surface of synchronous or timing belts mesh with grooves on the pulleys for
More informationLow wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
More informationSection 4: Synchronous Belt Drives
SYNCHRONOUS BELT DRIVES SECTION : 4 Section 4: Synchronous Drives Offering high power transmission combined with accurate positioning in a compact drive envelope, Fenner synchronous drives continue to
More informationP r o d u c t R a n g e > > >
Product Range > > > Wrapped V-Belts Kraftbands Raw Edge V-Belts Kraftbands Chloroprene Timing Belts Polyurethane Timing Belts 1 2 3 4 8 optibelt RED POWER 3 High performance wedge belts, 8 optibelt BLUE
More informationPOWER TRANSMISSION ROAD CONSTRUCTION
POWER TRANSMISSION ROAD CONSTRUCTION PRODUCTS SPECIALISTS FOR ASPHALT So it holds together well. Norbert, 42, foreman OPTIBELT SUCCESS STORY OPTIMAL PERFORMANCE UNDER EXTREME CONDITIONS The industrial
More information60 Drive Design & Maintenance Manual FRICTION BELT DRIVES. Max. Bore Pulley F J K L M N Outside Code Dia (P) Grooves No. Metric Inch Type Dia (O)
Catalogue Pitch No. of Bush Max. Bore Pulley F J K L M N Outside Code Dia (P) Grooves No. Metric Inch Type Dia (O) 031Z0041 56 1 1008 25 1 9 49 28 13 22 60 Z0042 56 2 1108 28 1 1 /8 9 49 35 27 22 60 031Z0051
More information3 ISO RoHS 3 Reach
3 ISO 9001 3 RoHS 3 Reach POWER Classical V-Belts The conventional V Belts are produced with top-quality material and submitted to rigorous controls that guarantee elevated duration and resistance to oils,
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More information4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
More informationTable of Contents. 1. Introduction Structure Material Characteristics
1 Table of Contents 1. Introduction Structure Material Characteristics 2. Standard belt type and Belt order code Standard belt type & Belt width Order Code 3. Application 1) Open Ended Applications 2)
More informationPSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
More informationEngineered Belts. Combined material solutions for precision and customized product control
EN Engineered Belts Combined material solutions for precision and customized product control Engineering techniques and covering materials Precision ground profiles on any axis of the belt or cover, control
More informationindex Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8
pv-belts index Megadyne PV-belts 2 Belt features and structure 3 Belt cross sections and dimensions 4 Pulleys 5 Standard belt range 6 Symbols, units, terms 8 Drive calculation procedure 9 Table 8: performance
More informationELATECH. isync T - AT. isync
ELATECH In the spirit of continuos innovation, in order to answer to the increased need of industry in power transmission, ELATECH has developed the rane of belts. belts are made with special polyurethane
More informationSYNCHRONOUS BELT DRIVES
Back to Contents TORQUE DRIVE PLUS 2 DRIVES NEW GENERATION TDP 2 BELTS LOW NOISE, MINIMUM BACKLASH, HIGH POWER DRIVE BELTS BELT RANGE DRIVE DESIGN PAGE 164 This state of the art, integrated range of synchronous
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
More informationInstallation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationUrethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
More informationREINFORCED POLYURETHANE ARC-POWER TIMING BELTS
B217 REINFORCED POLYURETHANE ARC-POWER TIMING BELTS The revolutionary arc shaped state-of-the-art timing belt design represents the most unique and efficient timing belt available. This world-wide patented
More informationPU ENDLESS MOULDED TIMING BELTS PU OPENEND EXTRUDED TIMING BELTS PU ENDLESS MOULDED MULTIRIB BELTS PU ENDLESS FLAT BELTS
Production range P.U. MEGAPOWER P.U. MEGALINEAR P.U. MEGAFLEX P.U. MEGARIB P.U. MEGAFLAT PU ENDLESS MOULDED TIMING BELTS PU OPENEND EXTRUDED TIMING BELTS PU ENDLESS EXTRUDED TIMING BELTS, ANY SPECIAL LENGTH
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
BELT CONVEYOR Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More information