epcatalogs.com Service Manual Excavator Type TC 210 LC/NLC Type TC 225 LC/NLC

Transcription

1 Service Manual Excavator Type TC 210 LC/NLC Type TC 225 LC/NLC

2 Service Manual Excavator TC 210/225 LC/NLC A Index 1. Safety Instructions / Safety Measures 2. Drive motor 3. Traveling mechanism 4. Hydraulic system settings 5. Main pump / Auxiliary pumps 6. Control block 7. Slewing Mechanism 8. Travel motor / Crawler gear 9. Pilot control block 10. Pilot Control Equipment 11. Arm System Hydraulic Cylinders 12. Hydraulic system auxiliary equipment 13. Air conditioning system 14. Maintenance intervals 15. Instructions for Welding 16. Technical Data 17. Hydraulic diagrams 18. Amendments for type TC 225 LC/NLC Introduction 3

3 Service Manual Excavator TC 210/225 LC/NLC A General Copyright This Service Manual is subject to copyrights. The rights concerned, in particular regarding reprinting, photo-mechanical or digital processing or reproduction, also of extracts, are only permissible upon written consent by TEREX GmbH. This provision shall not affect any reproduction for internal purposes. The contents of the Service Manual may be modified at any time without notice. As regards translations into foreign languages, the German version of this Service Manual shall prevail. Contact Technischer Service TEREX GmbH Fon: +49(0)4222/954-0 Fax: +49(0)4222/ Mail: service@atlas-terex.de Postal Address TEREX GmbH Technischer Service Atlasstraße 6 D Ganderkesee 4 Introduction

4 Service Manual Excavator TC 210/225 LC/NLC A General Basic instructions for work on the machine The present Service Manual describes excavator types TC 210 / TC 225. The excavators are designed to the present state of the art and operationally reliable. Nevertheless the operation of the equipment implies risks, in particular, if the equipment is not used properly or in compliance with the intended use. With regard to the prevention of accidents, the following procedures should therefore be followed: Every machine owner shall provide staff working on the machine with clear written instructions on basis of the present Service Manual, the related safety data sheets and the appropriate technical standards. Inspection work on the equipment may only be performed by the Technical Service of TEREX GmbH and/or trained and authorized expert staff. If an excavator is combined with components or replacement parts from third party manufacturers, these components shall be described in separate manuals provided by the relevant manufacturer and/or supplier. Should issues arise which - according to the reader's opinion - are not addressed to exhaustingly enough in this Service Manual, please contact TEREX GmbH for your own safety. The contents of the present Service Manual may be modified at any time without notice. As regards translations into foreign languages, the German version of this Service Manual shall prevail. Guarantee TEREX GmbH guarantees the reliability and operability of excavator types TC 210 / TC 225 only to the extent that: the equipment is only used in compliance with the intended purpose and operated and/ or maintained in accordance with the provisions of the present Service Manual; the excavator design is not modified unless explicitly agreed upon in writing by TEREX GmbH; only original spare parts and/or accessories authorized by TEREX GmbH are used; inspection and maintenance work is carried out in the stipulated frequencies. Introduction 5

5 Service Manual Excavator Type TC 210 LC/NLC Type TC 225 LC/NLC Section 1 Safety Instructions / Safety Measures Valid: A

6 Buy now Terex Excavator TC 210LC/NLC, TC 225LC/NLC Service Manual PDF With Instant Download