Our INNOVATION in sewer and pipe cleaning

Transcription

1 Our INNOVATION in sewer and pipe cleaning 2017

2 SN EN ISO 9001 : 2008 SN EN ISO : 2004 Version 10/ by enz technik ag

3 General terms of sale and delivery 4 STANDARD NOZZLES Standard cleaning nozzles Grenade-bombs Drainage channel nozzles Chisel point nozzles Guiding nozzles standard Flounder Enz-Bulldozer Ejector nozzles ROTATING NOZZLES RGS Radial rotating nozzles 75 /90 HRH Semi-radially rearward rotating nozzles HRV Semi-radial forward rotating nozzles KBR Rotating combination nozzles KBRV Rotating combination nozzles forward Bulldog recycling rotating nozzles Bulldog Antiblast Manhole & Lift Station nozzles Rotopuls vibration nozzles Guiding nozzles rotative Propeller nozzles Surface cleaner ULTRA HIGH PRESSURE Bulldog 15,000 psi Rotating nozzles up to 15,000 psi UR nozzles up to 36,000 psi UC nozzles up to 22,000 psi Surface cleaner nozzles up to 36,000 psi WIRE ROPE AND CHAIN SCRA- PERS 99 Wire rope and chain scraper CUTTERS Non-percussion milling cutters Cutting ball Percussion milling cutters ACCESSORIES Ceramic inserts enz JetMax ceramic (round jet) Inserts enz FanJet ceramic-steel (flat jet) Bushings Swivel joints Spray guns Combo kits JetCalc light JetCalc full version Order number index 139 Order sheet 144

4 General Information enz usa inc. / enz technik ag offers a large range of high quality pipe cleaning tools. Since 1985, through innovative designs, we have assisted the sewer and pipe cleaning industry to remain on the forefront of new and creative technologies. This ensures superior quality and gives you, the customer, a product that is efficient and durable. We are interested in being your Partner and helping you find the best solution for your problems. With our know-how and efforts we will accept any new challenges to help keep you on the forefront of the newest techniques available. The enz products All enz tools are calibrated to Customer specific Pump and Hose specifications with our own JetCalc Software to optimize the performance of your tool. The enz rotating nozzles are remarkable for their tremendous cleaning efficiency, which is based on a worldwide patented Drive and Brake jets design which increases and decreases the rotational speed with every half rotation therefore limiting the rotational speed. The resulting pressure vibrations essentially contribute to the disintegration of the deposits. We also carry a complete line of Rotating Chain Scrapers and Percussion Milling Cutters. Our ceramic orifice inserts ensure that enz tools have an outstanding durability. Our products are covered by International patents. Warranty / Safety / Liability enz Pipe and Canal Cleaning Tools are designed for highest possible performance. The materials and the heat treatment processes are selected for wear resistance and long life. enz is applying the most up to date manufacturing and quality assurance methods. The enz organization is ISO 9001 and ISO complaint. General Tool Warranty: enz warrants the quality of all tools supplied for the duration of 12 months from date of purchase. The warranty is limited to the replacement of faulty parts or the in house repair of faulty tools. No warranty is accepted if tools are not used or maintained in strict compliance with the operating manual supplied by enz. Warranty on ceramic nozzle inserts: The orifice diameters of enz ceramic nozzles are warranted for wear for the duration of 5 years from the date of purchase when used with potable water. And 2 years from the date of purchase when used with recycled water. The warranty is limited to the free of charge exchange of worn inserts. Warranty on Bulldog nozzles: enz warrants the internal mechanics of the Bulldog nozzles for 1 year. No warranty on excessive wear of head or skin body due to prolonged or abusive use. Despite all due care, this documentation may contain errors. enz technik ag and/or its Subsidiaries shall not be liable for any consequential damage. Technical modifications are reserved. Our Distributor Network covers the United States and Canada For a Distributor near you call: enz usa inc 1585 Beverly Ct. Unit 115 Aurora, IL Tel Fax sales@enzusainc.com

5 STANDARD NOZZLES Standard cleaning nozzles Grenade-bombs Drainage channel nozzles Chisel point nozzles Guiding nozzles standard Flounder enz -Bulldozer Ejector nozzles

6 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

7 Standard cleaning nozzles Made of wear-resistant, hardened steel, provided with front jet insert and blind plug (interchangeable). Angle of jet is 30, sturdy wall thickness, long service life and a minimum of wear and tear. Applications Appropriate for removal of sludge deposits and cloggings All nozzles from art onward are provided with ceramic inserts. Because of this, the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer. 7

8 Standard cleaning nozzles Silverline Standard cleaning nozzles 1/ NSL NSL NSL10F NSL15F 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT Ø 0.75 mm 4 Ø 0.95 mm 4 Ø 0.75 mm 4 Ø 0.90 mm 1 Ø 0.60 mm 1 Ø 0.60 mm ,075 5,075 5,075 5,075 Silverline Standard cleaning nozzles 1/4" - 3/ NSL10F NSL NSL15F NSL20F 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT Ø 0.80 mm 3 Ø 1.10 mm 3 Ø 1.00 mm 3 Ø 1.20 mm 1 Ø 0.80 mm 1 Ø 0.80 mm 1 Ø 0.80 mm ,075 5,075 5,075 5,075 8 Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Jet angle forward Maximum pressure [psi]

9 Standard cleaning nozzles Silverline Standard cleaning nozzles 3/8-3/4" NSL NSL30F NSL NSL40 1/4 NPT 1/4 NPT 1/4 NPT 3/8 NPT Ø 1.10 mm 6 Ø 1.00 mm 3 Ø 1.10 mm 6 Ø 1.30 mm 1 Ø 0.80 mm 4 Ø 0.50 mm ,075 5,075 5,075 5,075 Silverline Standard cleaning nozzles 1/2-3/4" SL SL SL40F SL70F 1/2 1/2 1/2 1/ Ø 1.20 mm 6 Ø 1.60 mm 6 Ø 1.20 mm 6 Ø 1.60 mm 1 Ø 1.10 mm 1 Ø 1.40 mm ,075 5,075 5,075 5,075 Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Jet angle forward Maximum pressure [psi] 9

10 Standard cleaning nozzles SL SL SL160 1/2 1/2 3/ Ø 1.10 mm 6 Ø 1.40 mm 6 Ø 2.20 mm 4 Ø 1.00 mm 4 Ø 1.10 mm 4 Ø 1.20 mm ,075 5,075 5, Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Jet angle backward Maximum pressure [psi] Measures [inch] Jet angle forward * Optional front jet

11 Standard cleaning nozzles Standard cleaning nozzles 3/8-1 1/ N /8 NPT 1/2 1/2 3/ M4 6 M6 6 M6 6 M6 1 M4 1 M6 3 M4 1 M M ,075 5,075 5,075 5,075 Standard cleaning nozzles 3/8-1 1/ SP / M8 8 M8 8 M8 8 M8 1 M8 1 M8 4 M8 1 M ,625 3,625 3,625 3,625 Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Jet angle backward Maximum pressure [psi] Measures [inch] Jet angle forward * Optional front jet 11

12 Standard cleaning nozzles Rotodrill TM 1/ REV ** ** ** ** 1/4 1/2 1/2 3/ M4 6 M4 6 M6 6 M ,075 5,075 5,075 5,075 3,625 ** Rotating front jet Repair set for Repair set for REV, , Repair set for Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Jet angle backward Maximum pressure [psi] Measures [inch] Jet angle forward * Optional front jet

13 Grenade-bombs This enz golden jet nozzle is made of wear-resistant hardened steel. Two different jet angles of 10 and 30 perform together providing strong traction and effective cleaning. The high efficiency is reached by appropriate water guidance. Applications Removal of stone, gravel and soft deposits Cleaning pipes before the use of chain flail head or cutter For optimal around cleaning, the nozzles to A can be equipped with fan-jet ceramic inserts. 13

14 Grenade-bombs Grenade-bombs 1/ N-10 1/4 NPT M ,075 Grenade-bombs 3/8-3/ N SP SP /8 NPT 1/2 1/2 1/2 3/4 3/4 3/ M6 6 M8 6 M8 3 M8 3 FanJet M8 4 M8 4 M8 The item and is only available with fan-jet inserts Ø 1.0 mm and Ø 1.5 mm. 4 M8 4 M8 4 M8 4 FanJet M8 1 M6 1 M8 1 M8 1 M8 1 M8 1 M8 1 M ,075 5,075 5,075 5,075 5,075 5,075 5, Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

15 Grenade-bombs Grenade-bombs A A-SP A-SP A-SP A M10 5 M10 10 M10 10 M10 10 M10 5 M10 5 FanJet M10 * * * * * ,625 3,625 3,625 3,625 3, B B-SP B-SP B M10 5 M10 10 M10 10 M10 5 M10 5 FanJet M10 * * * * ,625 3,625 3,625 3,625 Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.] 15

16 Grenade-bombs Grenade-bombs 1 1/ C C-SP C-SP C A A-SP A 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/ M10 5 M10 10 M10 10 M10 5 M10 5 M10 5 FanJet M10 5 M10 10 M10 5 M10 5 FanJet M10 * * * * * * * ,625 3,625 3,625 3,625 3,625 3,625 3,625 Accessory and wearing parts Cage with skids for clay pipes + Inliner A for Grenade-bomb A B for Grenade-bomb B Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

17 Drainage channel nozzles No discharge of water from cleaning drainage channels. The drainage channel nozzle is suited for cleaning storm water drains which use channels, for example along roadways, pedestrian zones and parkings lots. The spray pattern of the water jets prevent any water from splashing up directly. Afterwards, clean up around work areas is virtually eliminated. Applications Cleaning of channels with gutters, flushing out of debris, gravel, leaves, straw, etc. Advantages of the drainage channel nozzle: No discharge of water from drainage channels Optimal flushing performance No cleaning of the area after the fact The nozzle functions in any position 17

18 Drainage channel nozzles Drainage channel nozzles 1/2" - 1 1/4" SP SP A-SP A-SP0 1/2 3/ / M8 8 M8 10 M10 10 M10 1 M8 1 M8 * * ,626 3,626 3,626 3, Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

19 Chisel point nozzles With its 4 to 5 very strong concentrated forward jets and the sharp cutting edges, the chisel point nozzles will tear through almost any kind of blockage. The sharp edges cut, break and penetrate through every kind of blockage. Made of wear-resistant, hardened steel. All nozzles from art onward are equipped with replaceable ceramic jets. Because of this, the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer. Applications Penetration of completely clogged pipes Opening of root masses Opening of frozen pipelines Hydraulic thrust boring flushing operations 19

20 Chisel point nozzles Pointed nozzles 1/8-1 1/ NSL NSL NSL N NSL40 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT Ø 0.95 mm 3 Ø 0.90 mm 3 Ø 1.35 mm 3 Ø 1.30 mm 3 Ø 1.45 mm 4 Ø 0.50 mm 4 Ø 0.60 mm 4 Ø 0.70 mm 4 M4 4 Ø 0.7 mm ,075 5,075 5,075 5,075 5, N NSL SL SL SL SL SL200 3/8 NPT 3/8 NPT 1/2 1/2 1/2 3/4 3/ Ø 1.5mm 3 Ø 1.7 mm 3 Ø 1.3 mm 3 Ø 1.8 mm 3 Ø 2.4 mm 3 Ø 2.7 mm 3 Ø 3.1 mm 4 M4 4 Ø 0.8 mm 4 Ø 0.7 mm 4 Ø 0.9 mm 4 Ø 1.1 mm 4 Ø 1.8 mm 4 Ø 1.9 mm ,075 5,075 5,075 5,075 5,075 5,075 5, Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

21 Chisel point nozzles /2 M4 1/ M6 3 M6 4 M4 3 M ,075 5, /4 M4 3/ M6 3 M6 4 M4 3 M ,075 5,075 Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.] 21

22 Chisel point nozzles M M6 6 M6 4 M6 3 M ,625 3, L L 1 M M10 6 M10 4 M8 3 M ,625 3, Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

23 Chisel point nozzles L L80 1 M M10 6 M10 4 M8 3 M ,625 3, /4 M6 1 1/ M6 6 M6 4 M6 3 M ,625 3,625 Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.] 23

24 Chisel point nozzles L L 1 1/4 M8 1 1/ M10 6 M10 4 M8 3 M ,625 3, Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.]

25 Guiding nozzles standard The enz golden jet guiding nozzles standard were developed specifically for targeted cleaning of pipe inlets. They are used in searching for connections in ground lines and can thus prevent the need for cleaning via a household connection, for example. Entrance into the connection is made using a head nozzle on a flexible hose. Applications Removal of stone, gravel and soft deposits 25

26 Guiding nozzles standard Guiding nozzles standard / M ,075 Accessory and wearing parts Hose with head nozzle Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Length Width Height [inch] Jet angle backward Measures [inch] Maximum pressure [psi]

27 Flounder This tool is especially suited to clean flat pipes and channels. The flat design combined with the rounded corners and edges provides the tool with ideal gliding properties. Ceramic jets with flow straighteners and an optimized flow reversal create compact and aggressive water jets. Applications Appropriate for removing mud and loose debris in flat pipes and channels, i.e. run-off gutters The low and compact design facilitates access to a wide variety of pipes and channels. 27

28 Flounder Flounder 1/2-1 1/ /2 3/ S1: 2 M8, S2: 2 M8 S1: 2 M8, S2: 4 M8 S1: 15, S2: 7.5 S1: 10, S2: 0 * * ,625 3, / S1: 2 M10, S2: 2 M10, S3: 4 M10 S1: 2 M10, S2: 4 M10, S3: 4 M10 S1: 15, S2: 7.5, S3: 0 S1: 15, S2: 7.5, S3: 0 * * ,625 3, Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Length Width Height [inch] Jet angle backward Measures [inch] Maximum pressure [psi]

29 enz -Bulldozer A successful improvement in channel and pipe cleaning. The enz -Bulldozer has a hydrostatic chamber, herewith reducing water turbulences and improving the flow dynamic to the ceramic inserts. The result is a compact, aggressive and most effective water jet not attained up to now. An optional forward jet, on all enz -Bulldozer Nozzles, clears the debris ahead of the advancing unit. If desired, the front-jet can be closed by a blind plug. Two additional nozzles, set slightly higher, clean the sides of the channel. Applications The low and compact construction allows cleaning pipes with heavy debris. Characteristics enormous flushing capacity = reduced water consumption immense water acceleration = superb flushing effect low compact design = very good cleaning of ground in channels with large water passage the replaceable rounded skids give the Bulldozer excellent gliding ability 29

30 enz -Bulldozer enz -Bulldozer 3/4-1 1/ G G 3/ M10 2 FanJet M10 6 M10 2 FanJet M10 1 M10 1 M ,625 3, G /4 1 1/ M10 2 FanJet M10 6 M10 2 FanJet M10 1 M10 1 M ,625 3, Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Length Width Height [inch] Jet angle backward Measures [inch] Maximum pressure [psi]

31 enz -Bulldozer Accessory and wearing parts Spare skids G enz -Bulldozer (left/right) G enz -Bulldozer G (left/right) G enz -Bulldozer G (left/right) enz -Bulldozer (left) enz -Bulldozer (right) Flat runner enz -Bulldozer G (wear-resistant) G enz -Bulldozer G (wear-resistant) G enz -Bulldozer G (wear-resistant) Stabilizing plate G enz -Bulldozer G (wear-resistant) Measures length width: inch from 31.5 inch Connecting thread [inch] Thrust jet Maximum pressure [psi] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Jet angle backward Weight [lb.] 31

32 Ejector nozzles These tools are outstanding in their enormous flushing capacity. Their main application is cleaning large, fully surcharged pipes and drains bigger than Ø 10. The specific arrangement of the nozzle inserts ensures that cleaning is done carefully because the nozzle jets do not work directly against the pipe wall. As a result, this tool is also appropriate for cleaning older channel systems. Applications for enormous flushing capacity It integrates the heavy water flow in pipes and channels into the flushing and cleaning process. The water volume usable for cleaning is enhanced to five times the actual pump capacity. A pump of 80 GPM increase the flushing capacity of the nozzle to 400 GPM. As a result enormous quantities of sand and gravel can be removed fast and efficiently. 32

33 Ejector nozzles Ejector nozzles 1-1 1/ A M6 6 M * * ,900 2, B D 1 1/4 1 1/ M10 10 M * * ,900 2,900 *The length of the tool is indicated without hoses. Swivel joint included. Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Length Width Height [inch] Recycling min. gpm at 1450 psi at the nozzle Pass [inch] Maximum pressure [psi] 33

34 Ejector nozzles Accessory and wearing parts Y-Connection " - 2 x 1/2" A02 1" - 2 x 3/4" B02 1 1/4" - 2 x 1" HP hose /2" A03 3/4" B03 1" Swivel joint for /A for B/D 34 Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Length Width Height [inch] Jet angle backward Measures [inch] Maximum pressure [psi]

35 ROTATING NOZZLES RGS Radial rotating nozzles 75 HRH Semi-radially rearward rotating nozzles HRV Semi-radial forward rotating nozzles KBR Rotating combination nozzles KBRV Rotating combination nozzles forward Bulldog recycling rotating nozzles Bulldog Antiblast Manhole & Lift Station nozzles Rotopuls vibration nozzles Guiding nozzles rotative Propeller nozzles Surface cleaner

36 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

37 RGS Radial rotating nozzles 75 The radial rotating nozzles enz golden jet are equipped with 4 radial jets of 75 for the pipe cleaning and 3 thrust jets for the advance which at the same time flush away the loosened residues. As a result, pipe ducts of all kinds, even with cross holes, will be cleaned. The moving part of the enz golden jet nozzle rotates at a limited speed. These water jets hit the pipe wall directly with great impact, resulting in excellent cleaning capacity. Applications Cleaning of perforated drain pipes Cleaning of lateral pipes Removal of solid deposits Cleaning of lift stations & wet wells 37

38 RGS Radial rotating nozzles 75 RGS Radial rotating nozzles 75 1/4-3/ N A B 1/4 NPT 1/2 1/2 3/ M4 4 M6 4 M6 4 M6 3 M4 3 M6 3 M6 3 M6 * * * * ,075 5,075 5,075 3,625 RGS Radial rotating nozzles / A B / M8 4 M10 4 M10 3 M8 3 M10 3 M10 * * * ,625 3,625 3, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

39 HRH Semi-radially rearward rotating nozzles The semi-radially rotating enz golden jet nozzles has 4- retroacting cutting-jets at an angle of 45, which provide the cleaning energy as well as the thrust in one function, resulting in a low water consumption, while maximizing cleaning and flushing. With sufficient water capacity, optional thrust jets can facilitate upward cleaning. Applications Cleaning of pipes for TV-inspection To remove mineral deposits in pipes, grease and sludge Removal of fine hair roots 39

40 HRH Semi-radially rearward rotating nozzles HRH Semi-radially rearward rotating nozzles 1/4-3/ AN BN ASN A B 1/4 NPT 3/8 NPT 1/4 NPT 1/2 3/ M4 4 M4 4 M4 4 M6 4 M6 3 M4 * * * * * ,075 5,075 5,075 5,075 3, AS A B AS BS 1/2 1/2 3/4 1/2 3/ M6 4 M6 4 M6 4 M6 4 M6 3 M6 3 M6 3 M6 * * * * * ,075 5,075 3,625 5,075 3, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

41 HRH Semi-radially rearward rotating nozzles HRH Semi-radially rearward rotating nozzles 1-1 1/ A B / M8 4 M10 4 M10 3 M8 3 M10 3 M10 * * * ,625 3,625 3,625 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 41

42 HRV Semi-radial forward rotating nozzles enz golden jet semi-radial nozzle is equipped with four 45 angle forward jets (A front jet is available upon request). As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets desintegrate most any residue and flush the debris ahead of the nozzle. Applications Core-flushing of the steel pipes during hydraulic thrust-boring Cleaning of residential lateral pipes from inside the house out to the mainline Removal of ice in manholes 42

43 HRV Semi-radial forward rotating nozzles HRV Semi-radial forward rotating nozzles 1/4-3/ N A B 1/4 NPT 1/2 1/2 3/ M4 4 M6 4 M6 4 M6 3 M4 3 M6 3 M6 3 M6 * * * * ,075 5,075 5,075 3,625 HRV Semi-radial forward rotating nozzles 1-1 1/ A B / M8 4 M10 4 M10 3 M8 3 M10 3 M10 * * * ,625 3,625 3,625 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 43

44 KBR Rotating combination nozzles This all around enz golden jet Combination nozzle is excellent for flushing out pipes as well as adjoining lateral pipes at any angle. The KBR nozzles combine 2 radial jets at a 90 angle and 2 semi-radial retro-jets at a 45 angle. As a result, the KBR nozzles combine excellent cleaning efficiency with low water consumption. This combination allows both a forward thrust of the nozzle while simultaneously flushing away debris. Applications To remove plastic deposits, soap, sludge, and small hair roots To clean heat exchangers Cleaning of grease lines in restaurant districts 44

45 KBR Rotating combination nozzles KBR Rotating combination nozzles 1/16 NPT, 1/8 NPT - 3/ N N 1/16 NPT 1/8 NPT / mm 45 / mm * * 90 / mm 45 / mm ,075 5, AxxN BxxN ASxxN BSxxN 1/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT mm mm mm mm * * ,075 5,075 5,075 5,075 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 45

46 KBR Rotating combination nozzles AN BN ASN A B 1/4 NPT 3/8 NPT 1/4 NPT 1/2 3/ M4 4 M4 4 M4 4 M6 4 M6 3 M4 * * * * ,075 5,075 5,075 5,075 3, AS A B AS BS 1/2 1/2 3/4 1/2 3/ M6 4 M6 4 M6 4 M6 4 M6 3 M6 3 M6 3 M6 * * ,075 5,075 3,625 5,075 3, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

47 KBR Rotating combination nozzles KBR Rotating combination nozzles 1" - 1 1/4" A B / M8 4 M10 4 M10 3 M8 3 M10 3 M10 * * * ,625 3,625 3,625 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 47

48 KBRV Rotating combination nozzles forward The nozzle KBRV is provided with 2 semi-radial jets directed forward in an angle of 45. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets desintegrate most any residue and flush the debris ahead of the nozzle. Applications To remove semi-hard deposits To clean heat exchangers Cleaning of grease lines Flushing of the pipes from the house toward the main line 48

49 KBRV Rotating combination nozzles forward KBRV Rotating combination nozzles forward 1/16 NPT - 1/4 NPT NV NV 1/16 NPT 1/8 NPT / mm 45 / mm * * 90 / mm 45 / mm ,075 5, AVxxN BVxxN AVSxxN BVSxxN 1/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT mm mm mm mm * * ,075 5,075 5,075 5,075 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 49

50 KBRV Rotating combination nozzles forward KBRV Rotating combination nozzles forward 1/4 NPT, 1/2" - 1 1/4" AVN AV AV BV 1/4 NPT 1/2 1/2 3/ M4 4 M6 4 M6 4 M6 3 M4 3 M6 3 M6 3 M6 * * * * ,075 5,075 5,075 3, V AV BV / M8 4 M10 4 M10 3 M8 3 M10 3 M10 * * * ,625 3,625 3, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

51 Bulldog recycling rotating nozzles The enz golden jet Bulldog Rotating Nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 0.04 inch. Applications For operation with recycling water and fresh water Transport and water costs are noticeably reduced. Characteristics Easy to handle To remove grease and hard deposits The tool is virtually maintenance-free 51

52 Bulldog recycling rotating nozzles Bulldog rotating nozzle 1/2-3/4 with STANDARD HEAD: outstanding cleaning, strong thrust, proven design S C /2 1/2 3/ M6, 30 6 M6, 30 6 M6, 30 3 M4 1 M6 1 M6 1 M ,900 2,900 2,900 Bulldog rotating nozzle 1/2-3/4 with RGS HEAD: Huge radial cleaning power, ideal for gravity cleaning in vertical pipes, with or without thrust S C /2 1/2 3/ M6, 80 6 M6, 80 6 M6, 80 3 M ,900 2,900 2, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet Weight [lb.]

53 Bulldog recycling rotating nozzles Bulldog rotating nozzle 1/2-3/4 with CROSS JET HEAD: Penetrates completely blocked lines, open frozen pipes, interlaced root removal S C /2 1/2 3/ M6, 30 6 M6, 30 6 M6, 30 3 M4 1 M6 1 M6 1 M ,900 2,900 2,900 Skids for Bulldog 1/2"- 3/4" Skid for Bulldog / Skid for Bulldog C 3/ Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 53

54 Bulldog recycling rotating nozzles Bulldog rotating nozzle 3/ A B BS 3/ M8, 85 3 M8, 45 3 M8, 85 3 M8, 45 3 M8, 85 3 M8, 45 6 M8 6 M8 6 M8 1 M8 1 M8 1 M ,900 2,900 2, LS HS LS HS SET100 / SET M10, 45 3 M10, 35 LS = slow turning HS = fast turning 3 M10, 90 3 M10, 35 3 M10, 45 3 M10, 35 3 M10, 90 3 M10, 35 3 M10, 90 3 M10, 35 6 M8 6 M8 6 M8 6 M8 6 M8 1 M10 1 M10 1 M10 1 M10 1 M ,900 2,900 2,900 2,900 2, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

55 Bulldog recycling rotating nozzles Accessory and wearing parts for Bulldog 3/4-1 Skid for Bulldog Skid for Bulldog , Thrust stop for , Head KBR for Bulldog Excl. inserts Head HRH for Excl. inserts Head KBR for Excl. inserts Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi Front jet * Option Measures [inch] Weight [lb.] 55

56 Bulldog recycling rotating nozzles Bulldog rotating nozzle 1-1 1/4" with KBR HEAD: outstanding cleaning, strong thrust, proven design A B 1 1 1/ M10, 35 2 M M10, 35 2 M M10 6 M10 1 M10 1 M ,900 2,900 Bulldog rotating nozzle 1" - 1 1/4" with RGS HEAD: huge radial cleaning power, ideal for gravity cleaning in vertical pipes, with or without thrust. S = Thrust AS BS 1 1 1/ M M M10 6 M10 1 M10 1 M ,900 2, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

57 Bulldog recycling rotating nozzles Bulldog rotating nozzle 1" - 1 1/4" with 2 IN 1 HEAD: RGS head with KBR jet configuration. You get one head capable of two operations. S = Thrust AS 1 1 1/ M10, 80 3 M10, BS 3 M10, 80 3 M10, 45 6 M10 6 M10 1 M10 1 M ,900 2,900 Accessory and wearing parts for Bulldog 1-1 1/4" Skid for Bulldog , A 1 1/ Skid for Bulldog , B 1 1/4-1 1/ Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi Front jet * Option Measures [inch] Weight [lb.] 57

58 Bulldog recycling rotating nozzles Head KBR for Excl. inserts Head RGS for Excl. inserts Thrust stop for AS/BS Cage universal (without nozzle) RA with rolls 1 1/ RAW without rolls 1 1/ Cage universal (without nozzle) RB with rolls 1 1/4-1 1/ RBW without rolls 1 1/4-1 1/ Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

59 Bulldog Antiblast This nozzle was designed specifically to prevent blowing toilets while jetting in residential areas. Reduce the water pressure through toilets and vent traps with the Bulldog Antiblast. Cleaning sewer lines when near home installations brings the risk of pressure equalization through toilets and traps. This happens from negative pressure arising ahead of the nozzle or excess pressure following the nozzle if the installations are not correct or venting is not working properly. It s a very unpleasant surprise when this effect unintentionally turns a toilet into a shower! For this reason, enz collaborated with a prestigious technical institute to develop and test the Bulldog Antiblast. The Antiblast prevents this unpleasant side effect and guarantees cleaning in all directions. Advantages No pressure equalisation through stench traps or toilets Excellent streak-free, all-around cleaning Low maintenance, and compatible with recycled water Proven design Very simple to match to pump capacity Scientifically examined and tested 59

60 Bulldog Antiblast Bulldog Antiblast A B / M10 6 M10 6 M10 6 M8 6 M10 6 M10 1 M10 1 M10 1 M ,160* 1,160* 1,160* * To prevent a blow-out, this pressure at the nozzle should not to be exceeded. 60 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1160 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

61 Manhole & Lift Station nozzles The enz golden jet manhole nozzles are specifically designed for cleaning shafts, vertical pipes and lift stations. The forward facing water jets provide circumferential cleaning without stripes. The nozzles are self-centering during operation and do not have protruding parts that can cause the nozzle to become wedged on the access ladder. They clean with a front jet on the floor as well and require little space in the cleaning vehicle. Additional advantages include the manhole nozzles having no water loss from leaks and require practically no maintenance. The arduous cleaning with a hand nozzle or a lance is history with the manhole nozzle. Likewise, conical shafts can be cleaned easily. Advantages Circumferential cleaning of vertical pipes such as shafts or fountains 61

62 Manhole & Lift Station nozzles Manhole & Lift Station nozzles 1/2" - 1 1/4" A B LS A B 1/2 3/ / M8, M8, M10 6 M10, 80 6 M10, 80 2 M6 2 M6 * 1 M10 1 M ,900 2,900 3,625 2,900 2, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Optional front jet Weight [lb.]

63 Rotopuls vibration nozzles The enz golden jet rotating nozzle is provided with an eccentrically supported rotor, which produces very fast vibrations and pulsating jets. The resulting pulsations become so strong that deposits up to 4 thickness are disintegrated. Applications The Rotopuls nozzles remove middle-hard deposits in pipes of plastic, steel or concrete. In many cases, Rotopuls nozzles can replace the use of Percussion Milling Cutters or Rotating Chain Scrapers. Important: Rotopuls nozzles develop strong hydraulic impacts and vibrations. This can possibly cause damage in some pipes (i.e. clay pipes, thin-walled plastic pipes or PVC pipes). Therefore, it is important that Rotopuls Nozzles are only used in Steel, Cement, and Thick Walled Polyethylene pipes. 63

64 Rotopuls vibration nozzles ROTOPULS KBR vibration nozzles 1/8 NPT - 1/4 NPT ANExx BNExx ANESxx BNESxx 1/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT / / / / ,075 5,075 5,075 5,075 ROTOPULS KBR vibration nozzles 1/4 NPT - 3/8 NPT ANE ANE BNE 1/4 NPT 1/4 NPT 3/8 NPT M4 2 M4 2 M4 3 M4 * ,075 5,075 5, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

65 Rotopuls vibration nozzles ROTOPULS KBR vibration nozzles 1/2" - 1 1/4" AE AE BE EK BE 1/2 1/2 3/ / M4 4 M6 4 M6 4 M6 4 M10 3 M6 3 M6 3 M6 3 M8 3 M10 * * * * * ,075 5,075 3,625 3,625 3,625 ROTOPULS vibrating nozzle 1/2" ANE AE 1/4 NPT 1/ M4 4 M4 3 M4 3 M6 * ,075 5,075 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 65

66 Rotopuls vibration nozzles Turbopuls for recycling water 1/2" - 3/4" (working pressure up to 2,900 psi A B A** B** 1/2 3/4 1/2 3/ M6 1 M6 1 M8 1 M8 3 M8 3 M8 6 M8 6 M ,900 2,900 2,900 2,900 ** If you are using a 1" hose, it s recommended to reduce it to a 3/4" hose 95.BF100BM on the last few yards in order to avoid any vibration loss on the nozzle, together with thrust booster Z. Turbopuls for recycling water 1" - 1 1/4" (working pressure up to 2,900 psi) A-W** B-W** A B 1 1 1/ / M8 1 M8 1 M8 1 M8 6 M10 6 M10 6 M10 6 M ,900 2,900 2,900 2,900 ** Turbopouls with soft impact head 66 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

67 Rotopuls vibration nozzles Twin-Kit (without Turbopuls) from ,900 Twin-Kit (without Turbopuls) /4 from ,900 Standard impact head for A/B Soft impact head for A-W/B-W Especially for PVC-pipes Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.] 67

68 Rotopuls vibration nozzles Pointed center for Turbopuls for recycling water 1/2" - 1 1/4" E For AE For For HP hose 95.BF100BM Lenght 59 inch, DN16 Thrust booster Z 68 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * Option Weight [lb.]

69 Guiding nozzles rotative The enz golden jet guiding nozzles rotative were developed specifically for targeted cleaning of pipe inlets. They are used in searching for connections in ground lines and can thus prevent the need for cleaning via a household connection, for example. Entrance into the connection is made using a head nozzle on a flexible hose. The guiding nozzles are available with and without vibration. Applications Removal of hard deposits in PE, steel and concrete pipes, such as trickle lines 69

70 Guiding nozzles rotative Guiding nozzles rotative AS A-001 1/2 1/ M4 4 M6 3 M6 3 M ,075 5,075 Accessory and wearing parts Hose with head nozzle Eye bolt with nut Divers accessory Eye bolt with nut, pointed center, ceramic insert, screw with copper ring 70 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.]

71 Propeller nozzles The enz golden jet Propeller Nozzle completely and efficiently cleans pipes from 12 to 80 diameter. The skids are easy to adjust and can even be adapted to clean egg-shaped or oval pipe profiles. The propeller nozzles have been designed to work with fresh and recycled water. Due to the refined bearing, sealing system, and ceramic jet inserts, the Propeller Nozzles are virtually maintenance-free. Applications For cleaning large pipes 71

72 Propeller nozzles Propeller nozzles 1-1 1/ A* B* A B** A B 1 1 1/ / / M10 3 FanJet M10 3 M10 3 FanJet M10 3 M10 3 FanJet M10 3 M10 3 FanJet M10 3 M10 3 FanJet M10 3 M10 3 FanJet M10 3 M10 3 M10 6 M10 6 M10 6 M10 6 M / / / / / / ,900 2,900 2,900 2,900 2,900 2,900 **Largest egg profile Ø 23.6/ Application area for egg runner Ø 27.6/ Ø 39.4/59.0 *Propeller nozzle for cleaning drinking water fountains Ø Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.]

73 Surface cleaner Surface cleaner The rotating enz golden jet nozzle for cleaning surfaces is remarkable for its high efficiency. It outperformes conventional flat jet or round jet nozzles with a large margin. Turbo killer Applications Surface cleaner: To remove deposits of concrete-slurry, cleaning of facades, steps, walls, traffic signs, etc. Turbo killer: for the cleaning of steps, walls, artificial surfaces, traffic signs, etc. This special nozzle for cleaning surfaces is rotated by the cleaning liquid by means of an impeller. The exhaust axis has an inclination against the central axis of the rotating nozzle, which results in a circular movement. 73

74 Surface cleaner Surface cleaner 3/ N** 3/8 NPT 2 M ,075 **Caution, recoil force: the lance must comply with country-specific regulations Turbo killer 1/ /4 1/4 1/4 1/ at 1,400 psi: 2.9 at 2,175 psi: 3.6 at 2,900 psi: 4.2 at 1,400 psi: 3.8 at 2,175 psi: 4.7 at 2,900 psi: 5.6 at 1,400 psi: 4.7 at 2,175 psi: 6.1 at 2,900 psi: 7.2 at 1,400 psi: 5.9 at 2,175 psi: 7.3 at 2,900 psi: ,075 5,075 5,075 5, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.]

75 Surface cleaner Accessory and wearing parts Rebuild kit for for for for Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.] 75

76 76 Surface cleaner

77 ULTRA HIGH PRESSURE Bulldog 15,000 psi Rotating nozzles up to 15,000 psi UR nozzles up to 36,000 psi UC nozzles up to 22,000 psi Surface cleaner nozzles up to 36,000 psi

78 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

79 Bulldog 15,000 psi The enz golden jet Bulldog High Pressure rotating nozzle is specially designed for internal pipe cleaning up to 15,000 psi. It is suitable for removing even the most stubborn deposits from the pipe walls. Thanks to its clever bearing system, the Bulldog is virtually leak-free, resulting in higher efficiency. In addition, the forward-facing cross-jet cuts out the material from the blocked pipe like a milling cutter. Applications Cleaning of heat exchangers in chemical and nuclear plants General industrial cleaning 79

80 Bulldog 15,000 psi Bulldog 37 UHP M M M M6, 75 3 M6, 45 3 M6, 75 3 M6, 45 2 M ,000 15,000 Bulldog 37 UHP 1/2 NPT N N 1/2 NPT 1/2 NPT M6, 75 3 M6, 45 3 M6, 75 3 M6, 45 2 M ,000 15, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.]

81 Bulldog 15,000 psi Bulldog 60 UHP M M M M M6, 80 3 M6, 80 3 M6, 45 3 M6, 80 3 M6, 45 2 M ,000 15,000 15,000 Bulldog 60 UHP 1/2 NPT N N N 1/2 NPT 1/2 NPT 1/2 NPT M6, 80 3 M6, 80 3 M6, 45 3 M6, 80 3 M6, 45 2 M ,000 15,000 15,000 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.] 81

82 Bulldog 15,000 psi Accessory and wearing parts Bulldog 60 UHP Head Unplugger for , , Inserts are not included Skid guidance for , , Thrust part for , , M M M Thrust part for N, N, N N M /2 NPT 6 M Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.]

83 Rotating nozzles up to 15,000 psi The maximum pressure rotating nozzles enz golden jet are specifically designed for up to 15,000 psi cleaning pressure. They are especially efficient for cleaning the hardest deposits such as heat exchangers pipes in chemical nuclear plants, as well as in general industrial applications. Applications Cleaning of heat exchangers in chemical and nuclear plants and for general industrial pipe cleaning 83

84 Rotating nozzles up to 15,000 psi 15,000 psi Rotating nozzles (RGS) For Ø , equipped as radial rotating nozzle with 4 water jets (RGS) at an angle of 75 to the pipe wall N /4 NPT 1/2 NPT 1/2 NPT M4 4 M6 4 M ,000 15,000 15,000 15,000 psi Rotating nozzles (HRH) For Ø , equipped as semi-radial rotating nozzle with 4 water jets (HRH backwards) at an angle of aprrox. 45 to the back N /4 NPT 1/2 NPT 1/2 NPT M4 4 M6 4 M ,000 15,000 15, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet Weight [lb.]

85 Rotating nozzles up to 15,000 psi 15,000 psi Rotating nozzles (KBR) For Ø , equipped as combination nozzle (KBR) with 2 water jets, semi-radial with an angle of approx. 45, directed backward and 2 water jets radial acting at an angle of 90 to the pipe wall N N N 1/16 NPT 1/8 NPT 1/8 NPT / mm 90 / mm 45 / mm 90 / mm 45 / mm 90 / mm ,000 15,000 15, N /4 NPT 1/2 NPT 1/2 NPT M4 4 M6 4 M ,000 15,000 15,000 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet Weight [lb.] 85

86 Rotating nozzles up to 15,000 psi 15,000 psi Rotating nozzles (KBRV) For Ø , equipped as combination nozzle (KBRV) with 2 water jets, semi-radial with an angle of approx. 45, directed forwards and 2 water jets radial acting at an angle of 90 to the pipe wall. Attention! Use only with a lance! NV NV 1/16 NPT 1/8 NPT / mm 90 / mm 45 / mm 90 / mm ,000 15, N /4 NPT 1/2 NPT 1/2 NPT M4 4 M6 4 M ,000 15,000 15, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet Weight [lb.]

87 Rotating nozzles up to 15,000 psi 15,000 psi Rotating nozzles For Ø , equipped with 2 water jets, semi-radial with an angle of approx. 10, directed forwards. Attention! Use only with a lance! SPEZ SPEZ SPEZ SPEZ 1/4 1/2 1/2 1/ M4 2 M4 2 M4 2 M ,000 15,000 15,000 15, SPEZ SPEZ 1/2 1/ M4 2 M ,000 15,000 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure Measures [inch] Front jet Weight [lb.] 87

88 UR nozzles up to 36,000 psi The maximum pressure rotating nozzles enz golden jet are most efficient in cleaning the inside wall of pipes with a pressure up to 36,000 psi. They are most appropriate to remove harder deposits from the pipe walls. Characteristic: constant rotation, very low leakage, durability. Applications Cleaning of heat exchangers in chemical and nuclear plants and for general industrial pipe cleaning. 88

89 UR nozzles up to 36,000 psi UR A B UNF 9/16 LH M LH M3 2 M3 * * ,000 36,000 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.] 89

90 UC nozzles up to 22,000 psi The UC nozzle (with brake jet) is applied for industrial cleaning of heat exchangers and completely clogged pipes. The cross jet, which is directed to the front, cuts the material in the completely clogged pipe like a milling cutter. Simultaneously 2 radial jets of 90 clean the pipe wall. Through the same effect the removed material is flushed away. The cross jet causes a reaction force which, in many cases, makes it necessary to set the nozzle on a lance. The UC nozzles are available with or without thrust. Applications For industrial cleaning of heat exchangers and completely clogged pipes The UC nozzle has become a tool for universal use. 90

91 UC nozzles up to 22,000 psi UC nozzles up to 15,000 psi /16 NPT 1/8 BSPP 1/8 NPT 1/4 BSPP 1/4 NPT 3/8 BSPP 3/8 NPT / 6 7 / M M4-90 * (+ min. 4 gpm) * (+ min. 5 gpm) * (+ min. 4 / 9 gpm) * (+ min. 4 gpm) * (+ min. 4 gpm) M M M ,000 15,000 15,000 15,000 15,000 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * Optional Weight [lb.] 91

92 UC nozzles up to 22,000 psi UC nozzles up to 22,000 psi M7 1/8 BSPP 1/4 BSPP 1/4 UNF RH 1/4 UNF LH 3/8 UNF RH 3/8 UNF LH 3/8 BSPP 9/16 UNF RH 9/16 UNF LH / 8 8 / M M4-75 * (+ min. 5 gpm) * (+ min. 6 gpm) * (+ min. 5 / 11 gpm) * (+ min. 5 gpm) * (+ min. 5 gpm) M M M ,000 22,000 22,000 22,000 22, Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * Optional Weight [lb.]

93 Surface cleaner nozzles up to 36,000 psi The rotating enz golden jet nozzle for cleaning surfaces is remarkable for its high efficiency. It outperforms conventional flat jet or round jet nozzles with a large margin. Applications To remove deposits of concreteslurry, cleaning of facades, steps, walls, traffic signs, etc. 93

94 Surface cleaner nozzles up to 36,000 psi Surface cleaner 3/ NHD** 3/8 NPT 2 M ,000 **Caution, recoil force: the lance must comply with country-specific regulations 94 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.]

95 Surface cleaner nozzles up to 36,000 psi MJ-nozzles xxx xxx xxx xxx xxx xxx M14 x 1.5 LH 9/16"-18 UNF LH M24 x 1.5 RH 3/8" BSP 1/2" BSP 3/8 NPT 1/2" NPT 1/4" BSP G 3/4" M M24 x 1.5 RH ,250 5,250 11,600 15,000 21,700 36,000 Accessory and wearing parts Repair kit MJ 1, MJ 2, MJ 3, MJ 25 Seat and rotor inch MJ 4, MJ 6 Seat and rotor inch Repair kit MJ 1, MJ 2, MJ 3, MJ 25 Seat and rotor inch MJ 4, MJ 6 Seat and rotor inch Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at maximum pressure at the nozzle Measures [inch] Front jet * On order Weight [lb.] 95

96 96 Surface cleaner nozzles up to 36,000 psi

97 WIRE ROPE AND CHAIN SCRAPERS Wire rope and chain scraper 99

98 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

99 Wire rope and chain scraper The chain scraper head enz golden jet is a highly effective multi-purpose tool designed for easy use and maintenance under rugged work conditions. All rotating chain scraper models can be adapted to a wide range of pipe diameters by simply adusting the skid and selecting the respective chain length. For extra heavy deposits, chains with welded manganese steel plates and roller chain attachments are available for our larger chain cutters. (Roller chains are NOT recommended in clay pipes) Due to their high cleaning effect, rotating chains generate considerable mechanical forces. Any pipe made from steel, cast iron or plastic will accept these forces without risk of damage. When working in clay pipes a Cable Loop attachment is available for pipes 8 thru 16 diameter. Clay pipes have a tendency to be brittle due to damage from roots, external forces and offsets. The cable loop attachment offers a softer cleaning effect when operating under these conditions. (Prior to the use of chain scrapers, especially in clay pipes, it is strongly recommended to pre-clean with an enz Grenade Bomb or Rotojet Nozzle. We also recommend video inspection for pipe offsets and cracks which might impair the integrity of the pipe during the cleaning process.) Applications Cleaning pipes prior to the installation of inliners (application of coating and injections) Root cutting Removal of incrustations, hardened grease and mineral deposits Removal of concrete seepage in newly installed sewage pipelines Removal of certain damaged inliners Cutting of taps with diamond crown cutter 99

100 Wire rope and chain scraper Chain scraper 1/ N ATR-US** BTR-US** CTR-US** TR-SET-US 1/4 NPT 3/8 NPT 1/2 3/ , 3, 4, 5, 6, 8 2, 3, 4, 5, 6, 8 2, 3, 4, 5, 6, 8 4, 5, 6, 8, 10, (12*) 5 8 (13*) 8 (13*) 8 (13*) 13 (40*) 3 M4 2 M6 2 M6 2 M6 1 M6 - up to 44 gpm 2 M6 from 44 gpm 3 M4 4 M6 4 M6 4 M6 4 M8 1.6/ ,075 5,075 5,075 3,625 3, A B TR-US 1/2 3/ , 6, 8, M6 3 M6 1 M6 up to M6 from M6 3 M6 4 M ,625 3,625 4, Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Maximum pressure [psi] * Option Rotating nozzles Measures [inch] ** Various Ø available

101 Wire rope and chain scraper Wire rope and chain scraper for recycling water 1 These tools can be operated with Recycling-Water so that they allow an economically working principle. All models below are available in the RS (Link chain) version RL TR/RS R/RS R/RS M8 2 M6 3 M10 3 M10 3 M10 4 M8 3 M10 3 M ,625 3,625 3,625 3,625 Connecting thread [inch] Thrust jet Weight [lb.] Application range [inch] Front jet Recycling min. gpm at 1450 psi at the nozzle Maximum pressure [psi] * Option Rotating nozzles Measures [inch] ** Various Ø available 101

102 102 Wire rope and chain scraper sets ATR/BTR/CTR-SET-US TR-SET-US A=3/8, B=1/2, C=3/4 1 Wire rope and chain scraper 2 optional 3 optional 4 inclusive optional 5 optional optional 6 inclusive inclusive 8 optional inclusive 9 optional 10 inclusive 12 optional

103 Accessories Pipe diameter Ø 2" Ø 3" Ø 4" per yard Pin bolt chains (1 set) G G G G Chains (1 set) K K K K Root knife (all Ø) M Wire rope and chain scraper Cage (all Ø) Accessories A/B Pipe diameter Ø 3" Ø 4" Ø 6" Ø 8" per yard Chains (1 set) Torx screwdriver T10 (all Ø) C10 103

104 104 Accessories ATR/BTR/CTR-US Pipe diameter Ø 2" Ø 3" Ø 4" Ø 5" Ø 6" Ø 8" per yard Pin bolt chains (1 set) Chains (1 set) Root knife (all Ø) G G G G G G 11.G K K K K K K K TRM Wire rope and chain scraper Housing excl. skids (all Ø) TR Housing incl. skids (all Ø) Skids TR TR TR TR Milling cutter head (all Ø) TR

105 Accessories TR-US Pipe diameter Ø 4" Ø 5" Ø 6" Ø 8" Ø 9" Ø 10" Ø 12" per yard Pin bolt chains (1 set) Chains (1 set) G G G G G G G G K K K K K K K 11 Wire brush (1 set) SE SE SE Wire rope and chain scraper Root knife (all Ø) TR Housing excl. skids (all Ø) TR Skids TR TR TR TR TR TR TR Milling cutter head (all Ø) TR 105

106 106 Accessories RL Pipe diameter Ø 6" Ø 8" Ø 10" per yard Pin bolt chains (1 set) G G G G Chains (1 set) K K K 11.B Wire rope and chain scraper Chain plates (1 set, all Ø) R Skids with rolls (all Ø) R Diamond crown D D

107 Accessories TR/RS Pipe diameter Ø 6" Ø 8" Ø 10" per yard Pin bolt chains (1 set) G G G G Chains (1 set) K K K 11.B Wire rope and chain scraper Diamond crown (all Ø) D 107

108 108 Accessories R/RS Pipe diameter Ø 8" Ø 10" Ø 12" Ø 14" Ø 16" per yard Pin bolt chains (1 set) Chains (1 set) Link chain with plate (1 set) Pull part (all Ø) G G G G G 12.G P 12.07P 12.09P 12.11P 12.13P Wire rope and chain scraper Chain plates (all Ø) Cutter head (all Ø) Universal teeth (all Ø) Centre tooth or centre cap (all Ø) Centerhead (all Ø) Wire rope head (all Ø) Wire rope loop (1 set) Rope brushes (1 set) R R 15.ZU 15.ZS R S S S S S S SE SE SE SE SE Diamond crown (all Ø) D D D Skids with rolls (front), Skids with rolls (back) (all Ø) R R

109 Accessories R/RS Pipe diameter Ø 16" Ø 18" Ø 20" Ø 22" Ø 24" Ø 26" Ø 28" Ø 30" Ø 32" per yard Pin bolt chains (1 set) Chains for center head (1 set) Chains (1 set) G G G G ZG ZG ZG ZG ZG G G 12.G ZG ZG ZG Wire rope and chain scraper Pull part (all Ø) Cutter head (all Ø) R Universal teeth (all Ø) 15.ZU Centre tooth for centre cap (all Ø) 15.ZS Center head (all Ø) R Wire rope head (all Ø) S Wire rope loop (1 set) S S S S S S Rope brushes (1 set) SE SE SE SE 109 Skids with rolls for egg shaped pipes (all Ø) R

110 110 Wire rope and chain scraper

111 CUTTERS Non-percussion milling cutters Cutting ball Percussion milling cutters

112 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

113 Non-percussion milling cutters These enz golden jet rotating cutters work without impacts (percussion). The replaceable cutter heads are equipped with tungsten carbide and diamond tipped teeth. The cutters are designed to work in 2 to 3 pipe diameter. The cutter units can be used in a wide variety of applications. Calcium deposits, cement and grout can be removed as efficiently as mineral deposits, roots and wood. Applications Concrete or concrete sludges Layers of mineral deposits Roots, wood Series 13 Milling heads are for fixed diameter and one specific pipe size. 113

114 Non-percussion milling cutters Cutters without impacts 1/ TR 1/ TR M6 to 50 2 M6 from 50 4 M6 4 M8 1 M6 to 50 2 M6 from ,625 3,625 Accessory and wearing parts Cutter head TR TR, TR Cutter head TR TR, TR Carbide insert with screw 16.16Z TR 16.19Z TR Wear ring for plastic pipes TR TR Hard ring for plastic pipes TR TR Wear ring for plastic pipes TR TR 114 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.]

115 Non-percussion milling cutters Hard ring for plastic pipes TR TR Exchangeble centre TR TR Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.] 115

116 Cutting ball The enz golden jet cutting ball works without impact, but has the ability to switch in vibration. The cutting ball is equipped with a hard metal front cut for pipes that are more than 50% clogged. The side blades are self-sharpening and maintain their sharpness over their entire service life. Applications Interlaced roots Mineral deposits Lime scale The cutting ball's area of application is diverse. Due to its spherical shape it goes easily around curves without damaging the pipe. The cutting ball is leakage-free and can be operated with recycling water. 116

117 Cutting ball Cutting ball CB70 1/2" A AS 1/2 1/ M6 6 M6 3 M ,900 2,900 Cutting ball CB90 1/2" A AS 1/2 1/ M6 6 M6 3 M ,900 2,900 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet * On order Weight [lb.] 117

118 Percussion milling cutters The enz golden jet impact milling cutters range from 4 to 24 pipe diameter. In many cases, the use of a Precussion Milling Cutter is the only alternative to digging up pipes under foundations or roads. Percussion Milling Cutters are specifically designed to remove stubborn deposits like concrete, injection cement, as well as calcareous and mineral deposits. They are equipped with tungsten carbide and/or diamond tipped teeth. They work with a percussion system of impulses per minute and up to 12 tons of impact force. Applications To remove concrete, injection cement, calcarious layers etc. Ø 4 24 Please ask for special equipment for plastic deposits! When using the pull rod (drawing device) the cutters can be driven with half the water quantity (from 8 ). Characteristics superior performance compared to other cutters extended tooth life easy handling low maintenance cost proven design All impact milling cutters can be operated without impacts by means of a simple mechanical change over. 118

119 Percussion milling cutters Impact milling cutters 1, 1 1/ M10 3 M10 3 M10 3 M10 3 M10 3 M ,175 2,175 2, * Standard Housing * Standard Housing / 1 1/4 1 / 1 1/4 1 / 1 1/ M10 3 M10 3 M10 3 M10 3 M10 3 M ,175 2,175 2,175 To mill in deformed plastic or glass fiber pipes, please ask for special ground tooth * Standard Housing Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet Weight [lb.] 119

120 Percussion milling cutters Impact milling cutters 1, 1 1/ * Standard Housing * Standard Housing / 1 1/4 1 / 1 1/4 1 / 1 1/ M10 3 M10 3 M10 3 M10 3 M10 3 M ,175 2,175 2, * Standard Housing * Standard Housing adapter plates * Standard Housing adapter plates 1 / 1 1/4 1 / 1 1/4 1 / 1 1/ M10 3 M10 3 M10 3 M10 3 M10 3 M ,175 2,175 2,175 To mill in deformed plastic or glass fiber pipes, please ask for special ground tooth * Standard Housing adapter plates 120 Connecting thread [inch] Rotating nozzles Maximum pressure [psi] Application range [inch] Thrust jet Recycling min. gpm at 1450 psi at the nozzle Measures [inch] Front jet Weight [lb.]

121 Percussion milling cutters Accessory and wearing parts Cutter head K , changeable 8" K* , changeable 9" K , changeable 10" K , changeable 12" K , changeable 14" K , changeable 15" K , changeable 16" K , changeable 18" K , changeable 20" K , changeable 24" * K in combination with will need to order skid Art. No Skids , " - 10" " Hub NA K, K 8" - 10" NA K, K, K 12" - 14" NA K, K 16" - 18" NA K 20" NA K 24" Adapter plates KU for the enlargement of the skids diameter (12 parts) 18" - 24" Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling 121

122 Percussion milling cutters Diamond crown D K 4" D K 6" D K 8" D K 10" D K 12" D K 14" D K 16" Pull rod ZS pulling of the cutter 8" - 24" Center head with hole 15.ZKB cutters Universal cutting tooth, can be used as offset application both inside and outside 15.ZU cutters 4" - 24" Universal cutting tooth, specifically for plastic deposits, can be used as offset application both inside and outside 15.ZU-GSL cutters 4" - 24" Center teeth 15.Z1 cutters 5" - 6" Center teeth 15.Z1-100 cutters 4" Universal cutting tooth for centre cap 15.Z1-ZK cutters 8" - 24" Carbide tooth 15.ZHU cutters 4" - 24" 122 Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling

123 Percussion milling cutters Diamond tooth 15.ZDSU-30 cutters 4" - 24" Diamond tooth 15.ZDSU-60 cutters 4" - 24" Swivel joint with thrust jets S cutters 4" - 24" Cam plate 14.K " Hub for cutters until 6" 14.K " Hub for cutters from 8" - 24" Disc spring 14. T1 Sliding disc 14.G cutters Nord Lock for teeth (always as pairs) Extension for the shaft of impact drilling for cutter 12" Additional weight Ø 12" - 24"back Spacers for cutter heads 14.D 1 pair Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling 123

124 Percussion milling cutters IMC recycling impact milling cutters R R R 1 1/4 1 / 1 1/4 1 / 1 1/ M10 3 M10 3 M10 3 M10 3 M10 3 M ,175 2,175 2, Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling

125 Percussion milling cutters Accessory and wearing parts Cutter head K , changeable 8" K* , changeable 9" K , changeable 10" * K in combination with will need to order skid item no Skids R " R , " - 10" Hub NAR K, K, K 8" - 10" Diamond crown D K 8" D K 10" Pull rod ZS pulling of the cutter 8" - 10" Center head with hole 15.ZKB cutters Center head without hole 15.ZKW cutters Universal cutting tooth, can be used as offset application both inside and outside 15.ZU cutters 8" - 10" Universal cutting tooth, specifically for plastic deposits, can be used as offset application both inside and outside 15.ZU-GSL cutters 8" - 10" Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling 125

126 Percussion milling cutters Universal cutting tooth for centre cap 15.Z1-ZK cutters 8" - 10" Carbide tooth 15.ZHU cutters 8" - 10" Diamond tooth 15.ZDSU-30 cutters 8" - 10" Diamond tooth 15.ZDSU-60 cutters 8" - 10" Swivel joint with thrust jets S cutters 8" - 10" Cam plate 14.KR25W 0.09" Hub until 6" Torque wrench Stahlwille cutters 8" - 10" Hex socket 3/4" SW to torque wrench Socket adapter 3/4" - 1/2" to torque wrench Hand lever grease gun Pressol cutters 8" - 10" 126 Connecting thread [inch] Rotating nozzles Measures [inch] Application range [inch] Thrust jet Weight [lb.] min. gpm at 1450 psi at the nozzle Front jet Recycling

127 Percussion milling cutters Grease Motorex Plantogel for hand lever gun Transport board cutters 8" - 10" 127

128 128 Percussion milling cutters

129 ACCESSORIES Ceramic-steel inserts enz JetMax ceramic (round jet) Inserts enz FanJet ceramic-steel (flat jet) Bushings Swivel joints Spray guns Combo kits Deflection devices and accessories Hoses and accessories Maintenance JetCalc light JetCalc full version

130 enz usa inc Beverly Ct. Unit 115 Aurora, IL Tel Fax

131 Ceramic-steel inserts enz JetMax ceramic (round jet) JetMax ceramic-steel inserts are resistant to recycled or to any other quality water regardless of how aggressive. The lifetime of a ceramic nozzle insert is many times longer, compared to orifices made of hardened steel or other hard materials. enz fluid mechanics improves the flow drastically. The integrated flow-straightener is unique (patent pending). The cleaning affect is exceedingly increased with the same amount of water and energy M4 M6 M8 M10 1 G 1/4 14,500 14,500 7,250 7,250 7, (in increments of 0.1) (in increments of 0.1) (in increments of 0.1), 3.2, (in increments of 0.1), 3.2, 3.4, 3.6, 3.8, (in increments of 0.1), 3.2, 3.4, 3.6, 3.8, 4.0 Inserts enz FanJet ceramic-steel (flat jet) 22.08F 22.10F F M8 M10 1 G 1/4 7,250 7,250 7, (= 1.1mm round jet) 1.5 (= 1.6mm round jet) 1.0 (= 1.1 round jet) 1.5 (= 1.6 round jet) 1.9 (= 2.1 round jet) 2.2 (= 2.4 round jet) 2.5 (= 2.7 round jet) 2.8 (= 3.0 round jet) 1.9 (= 2.1 round jet) 2.2 (= 2.4 round jet) 2.5 (= 2.7 round jet) 2.8 (= 3.0 round jet) Thread [inch] Wrenche size [inch] Jet angle forward Maximum pressure [psi] Available nozzle sizes [mm] 131

132 Bushings N G 1/2 to NPT 3/8 3/4 to 1/2 1 to 5/ A B A 1 to 1/2 1 to 3/4 1 1/4 to 1 1 1/2 to 1 Extensions C210 C C 217 C /4 to 3/8 1/4 to 1/2 1/2 to 3/4 1/2 to 1 3/4 to 1 1 to 1 1/4 C 214 C to 1 1/2 1 1/4 to 1 1/2 Swivel joints Rust proof, sturdy execution, smooth operation, with excellent flow dynamic, suitable for larger channel cleaning and for operating cutters S /2 3/4 1 1 male 1 1/4 female 1 1/4 1 1/2 3 M , ,625 3,625 3,625 3,625 3,625 3, Connecting thread [inch] Length [ft.] Maximum pressure [psi] Thrust jet gpm Measures [inch] Weight [lb.]

133 Spray guns The maximum temperature is 150 C. For more comfort with easy trigger operation and light to hold. The lance can be provided with various nozzles /8 3/8 1/2 1/ Combo kits These compact toolboxes contain the most common used tools for pipe cleaning. This allows for clean and easy storage as well as for a rapid inventory check prior to leaving for the job site. The tool case is made from a shock resistant plastic and can withstand high and low temperatures. Tools not included /2" Combo kit 3/4" Combo kit 1" Combo kit , , , , A*, BTR , , , B, B*, CTR or TR , A*, L, , A, TR *Or Bulldog * Or Bulldog * B for 80 GPM Kit * Or Bulldog or Also available: 1/4 and 3/8 Combo kits. Other tool kit combinations are available upon request. Connecting thread [inch] inside: Length Width Hight [inch] Length [ft.] Wrenche size [mm] outside: Length Width Hight [inch] Application range [inch] 133

134 Deflection devices and accessories Banana extra small 91M Deflection device for cables and high-pressure hoses from Banana small 91 Deflection device for cables and high-pressure hoses from Banana medium 91A Deflection device for cables and high-pressure hoses from Flex guide for hoses (made out of stainless steel), small 91.05M until max. 5/8 hoses from Flex guide for hoses (made out of stainless steel) for 3/4-1 1/4 hoses from Flex guide for hoses for 1-1 1/4 hoses from Lower single roller 90 Avoid unnecessary wear on high-pressure hoses. The guide system mounts between the inside of the pipe and the upper edge of the manhole. The clamp jaw is adjustable to the manhole depth. Additional extensions are available. 13 ft. Extension (Deflection device) for 90 Connecting thread [inch] min. gpm at 1450 psi at the nozzle Measures [inch] Application range [inch] Maximum pressure [psi] Weight [lb.] 134

135 Additional second quick-lock for 90 Manhole roller guide 93 for an easy guiding of the highpressure hose Rope clip for upper deflection device 93.7 Adapter for flex guide for hoses Flex guide for hoses with adapter and 10 ft extension Hoses and accessories Hose C yards, 3/16" for 3,625 psi 1 1/8 male, 1 1/4 female C yards, 3/16" for 3,625 psi 1 1/8 male, 1 1/4 female C yards, 3/16" for 3,625 psi 1 1/8 male, 1 1/4 female C yards, 1/4" for 3,625 psi 1 1/4 male, 1 1/2 female C yards, 1/4" for 3,625 psi 1 1/4 male, 1 1/2 female C yards, 5/16" for 3,625 psi 1 1/4 male, 1 1/2 female Hand adapter A-22MF-04BM KAE A-22MF-08BM KAE 1/4" male, M22 x 1.5 female 1/2" male, M22 x 1.5 female Connecting thread [inch] Application range [inch] min. gpm at 1450 psi at the nozzle Maximum pressure [psi] Measures [inch] 135

136 Hose reel C330 incl. swivel joint, open-end wrench 27 mm and nozzle holder (without nozzles) 1 x 1/8 male, 1 x 1/2 female 1 x 1/4 male, 1 x 1/2 female 9.7 Maintenance Nozzle gauge C200 with 20 bolts with Ø 0.02" " C201 with 16 bolts with Ø 0.06" " Set nozzle cleaning tool C202 with 2 pins, incl. box Socket wrench C mm: for M4-inserts C101 C mm: for M6-inserts 7.0 mm: for M8-inserts C mm: for M8-inserts strong version C mm for M10-inserts Screw locking glue medium C192 Loctite Connecting thread [inch] Application range [inch] min. gpm at 1450 psi at the nozzle Maximum pressure [psi] Measures [inch]

137 Screw locking glue high-strength C109 Loctite 638 Screw locking glue high-strength C227 Loctite 270 Corrosion protection spray C191 Cleans and protects pipe-cleaning-tools 137

138 JetCalc light JetCalc light calculates the optimal match between the nozzle and the truck. Therefore, the nozzle will achieve it s best performance with the truck specifications. You get the JetCalc light version free by downloading it from JetCalc full version This JetCalc version calculates the optimal components for our nozzles and figures in the pressure loss. This program is specially for enz products. Other nozzle brands can also be calculated with this program. 138

139 Order number index G K G K G K M G K K K K K K K K G G G G G G TRM TR TR TR TR TR D G K G K G G K K SE G G K K SE G K G G K K SE G K TR TR TR TR TR TR TR TR TR G G G K G K G K R D G R R R R D D S D D R S C TR TR TR TR TR TR TR TR TR D D R D D R D D D D D E G G G G G N

140 A A B B ANE N ANE A B A B LS AN ANE ASN BN BNE A AS B A AS B BS A B N A B A B N NV N NV ANESxx ANExx ASxxN AVSxxN AVxxN AxxN BNESxx BNExx BSxxN BVSxxN BVxxN BxxN AN ASN AVN BN A AE AS AV B AE A AE AS AV B BE BS BV EK V A AV B BE BV N NV N NV N SPEZ N N N N SPEZ SPEZ SPEZ SPEZ SPEZ A B A* B* A B** N ATR-US** BTR-US** CTR-US** A B TR-SET-US TR-US RL TR/RS R R R/RS R R/RS RA RB A

141 B B B G P P P P P G S SE G S S SE SE G S S SE SE G S S SE SE S S SE SE ZG ZG ZG ZG ZG ZG ZG ZG G G G G G S G S G G G TR TR T ZS * Standard Housing K K NA NAR R ZS * Standard Housing K* K* R * Standard Housing K K R * Standard Housing K NA * Standard Housing K K * Standard Housing K NA * Standard Housing adapter plates K KU * Standard Housing adapter plates K NA * Standard Housing adapter plates K NA D G K K KR25W Z Z Z1-ZK Z1-ZK ZDSU ZDSU ZDSU ZDSU ZHU ZHU ZKB ZKB ZKW ZS ZS ZU ZU ZU

142 15.ZU ZU-GSL ZU-GSL Z Z A AS N** NHD** N A B A F F F S S S NSL NSL10F NSL NSL15F NSL10F NSL NSL15F NSL20F NSL NSL30F N NSL SL SL40F SL SL70F SP Z NSL SL SL SL REV ** ** ** ** N N SP SP SP SP A B A A-SP A-SP A-SP A-SP B B-SP B-SP C C-SP C-SP A A-SP A-SP C S A B BS SET100 / SET A B C S A AS B BS LS LS A B HS HS AS BS C S A B A** B** A A-W** B B-W** A B C A A AS G G G G

143 N N N N N A B xxx xxx xxx xxx xxx xxx NSL NSL NSL N N NSL NSL SL SL SL SL SL L L L A B L L L A B D M A M BF100BM A-22MF-04BM KAE A-22MF-08BM KAE C C C C C C C C C C C C C C C C C C C C C C C C C C

144

145 Standard Terms & Conditions 1. Prices and Validity Catalog prices effective on the current price list date supersede all previous prices. Catalog prices shown are subject to change without any prior notice and typographical errors are subject to correction. Prices quoted are List Prices valid for 30 days from the date of the quotation. 2. Taxes All prices shown in the price list and in quotations exclude any federal, state, or local taxes where applicable. Any tax, will be added to the invoice. 3. Title and Transportation / Handling All prices are to be understood FOB warehouse Aurora. Title to the goods passes to the buyer at the point of origin (Free on board warehouse Schaumburg). The cost of transport and the risk of any transport damage and/or losses lies with the buyer. Lacking the buyer s specific instruction, Enz USA will ship via UPS and arrange for adequate transport insurance. All cost for transport, handling fee ($3.00) and insurance incurred will be charged to the buyer. The buyer shall make all claims for transport damages or loss to the freight carrier or the insurance company involved. The buyer will not withhold payment to Enz USA Inc., on damaged or lost goods once title has past to the buyer. Enz USA Inc., retains a security interest in the goods until the purchase price is paid in full. 4. Terms of Payment and Credit Approval The Standard Terms of payment of Enz USA Inc. are 30 days net from the date of invoice. Any exception from this rule requires a written agreement. The acceptance of all purchase orders is subject to the approval of the credit Department of ENZ USA Inc. In the case of payments delayed 45 days or more from the date of the invoice, any further shipment will be COD until the total balance is paid off. In the case of payments delayed 60 days or more from the date of the invoice, the shipment of further merchandise is withheld until all invoices are paid down to 45 days. A finance charge of.05% per day will be added to all unpaid invoices past the net 30 days term (18% p.a.). 5. Billing or Shipping Errors Billing or shipping errors and disputed invoices must be brought to the attention of Enz USA, within 10 days of the invoice date. Credits for returned merchandise may be used against further purchases. All Claims for shipping errors and shortages must be reported immediately. 6. Returns for Credit No returned goods are accepted without a Returned Goods Authorization (RGA) number. At our discretion, Enz USA reserves the right to apply a 15% re-stocking charge. Merchandise returned must be identified as to original invoice number and date purchased. All return shipments are at the cost and risk of the buyer. Any credit is subject to inspection for damage and wear of the returned good. Worn or obsolete goods are not accepted for return for credit. 7. Special Orders Once an order for special customs work has been placed in production, no cancellation will be accepted. A premium of 25% will be charged on special orders. All deposits are non-refundable. 8. Express Orders - Orders called in after 2:30 p.m. Central Time will be shipped the following day. - Orders called in after 3:30 p.m. Central Time for same day shipment are subject to a $25 - surcharge. 9. Minimum Purchase Order The minimum order amount is $50 - net invoice.

146 enz usa inc Beverly Ct. Unit 115 Aurora, IL Phone Fax