TOLL FREE Flushing/Accessories RONDO. Finishing Nozzles. Flushing Nozzles AT MAKES A SMART NOZZLE TM TM. Flow Diversion Technology

Size: px

Start display at page:

Download "TOLL FREE Flushing/Accessories RONDO. Finishing Nozzles. Flushing Nozzles AT MAKES A SMART NOZZLE TM TM. Flow Diversion Technology"

Jacob Robbins
5 years ago
Views:

1 & ACCESSORIES R SMART NOZZLES (8)

WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM Flow Diversion Technology 68 General Cleaning Nozzles 2 2 WEISEL GENERAL CLEANING

The "Wiesel"" is an affordably priced compact nozzle which is perfect for general pipe cleaning. General Pipe Cleaning. Optional front jet to help penetrate minor blockages.

2 WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM Flow Diversion Technology 68 General Cleaning Nozzles 2 2 WEISEL GENERAL CLEANING NOZZLE WEISEL GENERAL The "Wiesel" CLEANING " is an affordably NOZZLE priced compact nozzle which is perfect for general pipe cleaning. The "Wiesel"" is an affordably priced compact nozzle which is perfect for general pipe cleaning. General Pipe Cleaning. Optional front jet to help penetrate minor blockages. General Pipe Cleaning. Optional front jet to help penetrate minor blockages. 55--F 6 x º F 56--F 6 x 6º x º / F 57--F SMART NOZZLE6 x 8º x º TYPICAL NOZZLE / F 8 x º - 15 Flow Diversion Technology drastically reduces energy robbing turbulence by more effectively DUAL DEGREE GENERAL CLEANING NOZZLE The "Dual Degree" nozzle nozzle has has six jets six (three jets (three 1 1 degree thrust jets jets and and three three degree degree cleaning cleaning jets) jets) which create create pulling pulling power power and and cleaning cleaning ability. ability. The The pull pull power power allows allows this this nozzle nozzle to travel to travel far into far into the the pipe pipe - and - and the the degree degree jets jets mean mean that that the sewer Smart Nozzle Insert the sewer or storm pipe will be cleaned effectively. or storm pipe will be cleaned effectively. C (Ceramic, Conical, Cylindrical) Orifice General pipe cleaning where longer pulls or an incline might be involved. General pipe cleaning where longer pulls or an incline might Optional be front involved. jet available. Optional front jet available. 52--F 6 Total: x1º, xº - 8 High Efficiency Low Efficiency 5--F 52--F 6 Total: 6 Total: x1º, x1º, xº xº / F 5--F 8 Total: 6 Total: x1º, x1º, xº xº / Water 5--F is channeled 8 Total: x1º, and xº shaped via the C orifice 8-18 TOLL FREE TOLL FREE TOLL FREE TOLL FREE (8)

AT MAKES A SMART NOZZLE TM TM Flow Diversion Technology Use prior to video inspection yields a 6 degree completely clean line, free of grease, dirt, and debris.

3 AT MAKES A SMART NOZZLE TM TM Flow Diversion Technology Use prior to video inspection yields a 6 degree completely clean line, free of grease, dirt, and debris. Smart Nozzle Insert Excellent line flushing nozzle with great thrust/pull, and flushing ability to bring debris back to the manhole F F F SMART NOZZLE52--F 52--F Type 5--F HW F HW F High EfficiencyHW F HW F BK 1 x 15º x 15º x 15º x 15º x 15º HW FLUSHING NOZZLE The low angle dual degree jets, make the HW the ultimate flushing nozzle while using less water and performing the job faster than drilled nozzles. 6 total: 6 x 1º 6 total: 6 x 8º 8 total: x 6º, x 12º Low Efficiency 1 total: 5 x 6º, 5 x 12º 12 total: 6 x 2º, 6 x º RONDO FINISHING NOZZLE The Rondo produces an umbrella spray pattern giving this nozzle a complete 6 degree cleaning pattern in the pipe. This is accomplished without moving parts or the maintenance commonly found with a rotation nozzle. TYPICAL NOZZLE Flow Diversion Technology drastically reduces energy robbing turbulence by more effectively / 1 1/ C (Ceramic, Conical, Cylindrical) Orifice Water is channeled and shaped via the C orifice / Finishing Nozzles Flushing Nozzles TOLL FREE (8)

WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM BEST Flow PRODUCTS, Diversion BEST Technology LOCAL SUPPORT TM TM 7 Flushing Nozzles MEGA 6 FLUSHING NOZZLE MEGA 6 The Mega 6

4 WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM BEST Flow PRODUCTS, Diversion BEST Technology LOCAL SUPPORT TM TM 7 Flushing Nozzles MEGA 6 FLUSHING NOZZLE MEGA 6 The Mega 6 produces extreme flushing capabilities FLUSHING for larger NOZZLE lines which makes this a favorite for cleaning storm drains and for culvert The Mega 6 produces extreme flushing cleaning. The anti-tip heavy weighted design capabilities for larger lines which makes this a makes the Mega 6 a virtual water shovel to flush favorite for cleaning storm drains and for culvert back all debris. cleaning. The anti-tip heavy weighted design makes the Mega 6 a virtual water shovel to flush back all debris. Storm The lines, red line culverts, in the photo large diameter depicts the pipe point lines which where the a jets strong of the nozzle come flushing contact floor with cleaning the floor nozzle of the is needed. pipe creating the water shovel affect. Working Storm lines, Diameter culverts, large diameter pipe lines where a strong flushing floor cleaning nozzle is needed F 11 x º-º F Part SMART No. NOZZLE No. & 11 Angle x º-º Rear Jets No. & Angle Front TYPICAL Jets 1 Hose 1/ NOZZLE Size Working Diameter Flow Diversion 11 x º-º Technology drastically reduces 1 1/ energy robbing turbulence by more effectively POWER JET FLUSHING NOZZLE POWER JET The Power Jet injector nozzle uses the water already in the pipe and accelerates it with a venturi pump FLUSHING effect to provide NOZZLE flushing and cleaning of large diameter high-flow lines. Large stones, mud, The Power Jet injector nozzle uses the water sand, and litter can all be effectively flushed from the already line using in the this pipe powerful and accelerates nozzle. it with a venturi pump effect to provide flushing and cleaning of large Smart diameter Nozzle high-flow Insert lines. Large stones, mud, sand, and litter can all be effectively flushed from the line using this powerful nozzle. C (Ceramic, Conical, Cylindrical) Orifice F 561--F F 528--F F Hose 1 1/ Size High Efficiency F 528--F F 1 1/ 11 x º-º Working 2-1 Diameter Water is channeled and shaped via the C orifice 2-1 The red line in the photo depicts the point in which the jets of the nozzle come in contact with the floor of the pipe creating the water shovel affect. Cleaning large diameter high-flow lines where it is difficult or impractical to plug or reroute the lines for cleaning. Also effective on older lines where pipe walls are delicate. Low Efficiency Cleaning large diameter high-flow lines where it is difficult or impractical to plug or reroute the lines for cleaning. Also effective on older lines where pipe walls are delicate. TOLL FREE TOLL FREE TOLL FREE TOLL FREE (8)

5 525-1-F 527--F F F 527--F F 6 x º 6 x º 6 x º 6 x º 6 x º 6 x º TRI-STAR PENETRATING NOZZLE The "Tri-Star"" is constructed with six rear thrust jets and four forward thrust jets. This design, combined with the PENETRATING heavy duty forged steel NOZZLE construction, makes this the best The "Tri-Star"" is constructed with six rear thrust blockage penetrator on the market. You will break jets and four forward thrust jets. This design, through blockages quickly to restore flow through combined with the heavy duty forged steel the pipe. construction, makes this the best blockage penetrator on the market. You will break A great nozzle for common obstruction removal and blockage through blockages quickly to restore flow through penetration, including ice. the pipe. A great nozzle for common obstruction removal and blockage penetration, including ice. 1 x º, x 2º 1 x º, x 2º 1 x º, x 2º 1 x º, x 2º 1 x º, x 2º 1 x º, x 2º / / AVANTI PENETRATING NOZZLE AVANTI The "Avanti is a high speed rotational nozzle designed with a hardened steel drilling fixture. The drilling PENETRATING action of this nozzle NOZZLE means it will bore through even the toughest The "Avanti is a high speed rotational nozzle obstructions. This nozzle has rear jets only (no front designed with a hardened steel drilling jets) which means it has a much stronger pull and fixture. The drilling action of this nozzle means it thrust ability than standard penetrating nozzles. will bore through even the toughest obstructions. This nozzle has rear jets only (no front The ultimate obstruction removing nozzle for extreme blockages jets) which means it has a much stronger pull and and long distance challenges. thrust ability than standard penetrating nozzles. The ultimate obstruction removing nozzle for Part extreme No. blockages No. & Angle Spinner Jets and long distance challenges F x 15º F / - 15 No. & Angle Spinner Jets 528--F F 527--F 528--F x 15º TRI-STAR / Penetrating Nozzles (8)

WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM Flow Diversion Technology Rotational Nozzles RDS ROTATIONAL NOZZLES The RDS is a high speed rotational nozzle that cleans the

& Angle Slot Jets 5219-1-F 5219-2-F x 15º x 15º - 8-8 5219--F SMART NOZZLE TYPICAL NOZZLE - 8 522-2-F 5221-1-F / - 12 6-15 5221-2-F 6-15 5221--F Flow Diversion Technology drastically reduces 6-15

6 WHAT MAKES A SMART NOZZLE TM TM BEST PRODUCTS, BEST LOCAL SUPPORT TM TM Flow Diversion Technology Rotational Nozzles RDS ROTATIONAL NOZZLES The RDS is a high speed rotational nozzle that cleans the entire inside of the pipe with spinning jets that scour the pipe walls. Offered with four different configurations to match specific cleaning challenges. TYP - A TYP - B/C TYP - D TYP - E No. & Angle Slot Jets F F x 15º x 15º F SMART NOZZLE TYPICAL NOZZLE F F / F F Flow Diversion Technology drastically reduces F 1 1/ F energy robbing turbulence by more 1 1/ effectively 1-28 ROTOMAX ROTATIONAL NOZZLES The "Rotomax" nozzle uses a controlled rotational cleaning head which rotates at a lower rotational speed than traditional spinning nozzles. This reduced speed rotation means jetspray contact time is dramatically increased thus allowing for superior Smart Nozzle cleaning Insert of pipe walls. The Rotomax also has a forward off-set jet that cuts and provides root maintenance. Grease removal, de-scaling, crust elimination, and an excellent secondary blockage removal nozzle after penetration has been established. Type C (Ceramic, Conical, Cylindrical) Orifice A B/C E B/C A B/C E A B/C Heavy Grease removal and entire pipe cleaning along with excellent root maintenance capabilities F High Efficiency 528--F F 522--F F + 1 offset forward Low Efficiency + 1 offset forward / offset forward offset forward offset forward 1 1/ Water is channeled and shaped via the C orifice TOLL FREE TOLL FREE TOLL FREE (8)

7 Large diameter pipe cleaning up to 12. Large diameter pipe cleaning up to F 526--F F 526--F 6 x 15 6 x 2 6 x 15 6 x 2 ROTOJET ROTATIONAL NOZZLE This state of the art development among rotation nozzles is independently driven, regardless of pressure and volume stream, with a rotation rate between 5 and ROTOJET rotations per minute. Fast removal of solid matter ROTATIONAL with this rotation NOZZLE system. This It is state also suited of the art for development cleaning tanks among and water rotation pipes. nozzles Working is independently with a water recovery driven, system regardless on the of pressure vehicle and is also volume possible stream, with this with nozzle. a rotation rate between 5 and rotations per minute. Fast removal of solid matter with this rotation system. It is also suited for cleaning tanks and water pipes. No. of Working Rotation with Jets a water Hose recovery Size system Working on the Diameter vehicle is also possible with this nozzle. 6 No. of Rotation Jets Rotational Nozzles Nozzles (8)

8 WHAT MAKES A SMART NOZZLE TM TM BEST Flow PRODUCTS, Diversion BEST Technology LOCAL SUPPORT TM TM Cutting Systems COMBI CUTTING SYSTEMS The "Combi"" Cutting System is a versatile cutting nozzle that can be fitted with an aggressive drive chain cutter or a less aggressive link chain cutter. The drive chain design is best suited for the most difficult obstructions while the link chain is for older pipes. Each design is easily interchangeable and comes with various lengths for different pipe sizes. SMART NOZZLE F F F x 9º x 9º x 9º TYPICAL NOZZLE / Flow Diversion Technology drastically reduces energy robbing turbulence by more effectively Drive Chain Replacment Chain For Combi C (Ceramic, Conical, Cylindrical) Orifice No. of Links Smart Nozzle Insert Z Z Z Z Z Z Z Z 16 Quantity Z Z Z Z Z Z Z Z Aggressive root cutting and mineral deposit removal, and/or general pipe line root maintenance No. of Links Link Chain Replacment Chain For Combi Quantity High Efficiency Low Efficiency Water is channeled and shaped via the C orifice 8 TOLL FREE TOLL FREE TOLL FREE (8)

Small line root cutting. Flexible skid allows for travel through bends and over off sets. Large diameter pipe cleaning up to 12.

9 Small line root cutting. Flexible skid allows for travel through bends and over off sets. Large diameter pipe cleaning up to F F F F 526--F Large line root cutting and mineral deposit removal. Top photo shown with optional Wamax skid for smaller lines. Bottom photo shown with optional Vari-Turn centering skid. 6 x 15 6 x 2 EEL CUTTER CUTTING SYSTEMS The EEL Cutter is a high speed rotational chain cutter utilizing a bristled centering skid to allow it to maneuver through bends, over bad offsets, and around elbows. This unique ROTATIONAL design allows NOZZLE access to normally This state impassable of the art areas. development among rotation nozzles is independently driven, regardless of pressure and volume stream, with a rotation rate between 5 and rotations per minute. Fast removal of solid matter with this rotation system. It is also suited for cleaning tanks and water pipes. Working with a water recovery system on the vehicle is also possible with this nozzle. x 9º x 9º x 9º No. of Rotation Jets 6 ROTOJET / K11 CUTTING SYSTEMS The K11 Cutting System takes over where the Combi Cutter leaves off - handling root cutting and mineral deposit removal in larger diameter lines up to. This high speed rotational chain cutter is capable of cutting through the largest and toughest root masses. Cutting Rotational Systems Nozzles No. & Type Rotor Jets F x R 1 1/ (8)

10 WHAT MAKES A SMART NOZZLE TM TM BEST Flow PRODUCTS, Diversion BEST Technology LOCAL SUPPORT TM TM Milling System WAMAX MILLING SYSTEM The Wamax Milling System utilizes an exclusive turbine driven gearing system to generate cutting torque to turn the milling head. This combined with the hammer-drill effect of the cutting wheel makes the Wamax capable of cutting concrete, major mineral deposits, and solid blockages. The internal gearing also allows the system to be used with much lower GPM jetting machines when compared to other milling systems. Part SMART No. NOZZLEType F TYPICAL No. & Angle NOZZLE Front Jets F Flow Diversion WAMAX Technology 2 8 x drastically 1º reduces 58--F WAMAX 8 x 1º energy robbing turbulence by more effectively C (Ceramic, Conical, Cylindrical) Orifice Smart Nozzle Insert WAMAX 1 x 15º WAMAX Removal of concrete and major mineral deposits. Available in three sizes Wamax 1, 2,. WAMAX 2 WAMAX High Efficiency Low Efficiency Water is channeled and shaped via the C orifice TOLL FREE TOLL FREE TOLL FREE (8)

11 General cleaning This nozzle is rated to, PSI. Large diameter pipe cleaning up to 12. General cleaning This nozzle is rated to, PSI. General cleaning This nozzle is rated to, PSI F 526--F 597--F F F F RADIAL NOZZLE STANDARD NOZZLE The standard RADIAL NOZZLE is ideal for the most common sewer blockages. Designed to clean lines to 12 in diameter. Available with or with out forward jet. 5 x 5º 5 x 5º 5 x 15º 5 x 15º ROTATIONAL NOZZLE This state of the art development among rotation nozzles 1 x is º independently driven, regardless - 12 of pressure and volume stream, with a rotation - 12 rate between 1 x º 5 and rotations per minute. - Fast 12 removal of solid matter with this rotation - system. 12 It is also suited for cleaning tanks and water pipes. Working with a water recovery system on the vehicle is also possible with this nozzle. RADIAL VORTEX No. of Rotation Jets Hose STANDARD Size Working NOZZLE Diameter The RADIAL VORTEX nozzle combines 15 rear jets for thrust with either 6 x 15 5 or 5 degree angles for effective cleaning. Ideally suited 6 - for 2 8 to 12 lines 6 x 2 on a maintenance program. 6 Available with or without forward jet F F F F F F F F 5 x 15-5º 6 x 15-5º 5 x 15-5º 6 x 15-5º 1 x º 1 x º SNUB NOSE STANDARD NOZZLE The SNUB NOSE nozzle is a basic design similar to the standard Radial Nozzle but shorter. The shortness allows for easier negotiation of turns. It is especially effective when working in pipes with small openings. Available with forward jet. 5 x 5º 6 x 5º 5 x 15º 1 x º 1 x º ROTOJET Standard Rotational Nozzles Nozzles (8)

12 WHAT MAKES A SMART NOZZLE TM TM BEST Flow PRODUCTS, Diversion BEST Technology LOCAL SUPPORT TM TM Standared Nozzles MINI MISSILE HIGH EFFICIENCY NOZZLE The MINI MISSILE is a solid one piece construction nozzle. The Mini Missile s aerodynamic design combined with 5 degree orifices creates optimum thrust. These large volume orifices also produce massive water output resulting in powerful capabilities F F x 5º x 5º SMART NOZZLE PULLING EYE STANDARED NOZZLE TYPICAL NOZZLE Flow Diversion Technology drastically reduces energy robbing turbulence by more effectively C (Ceramic, Conical, Cylindrical) Orifice Smart Nozzle Insert 1 x º The PULLING EYE nozzle is used for pulling cable of tag lines for TV and/or Bucket Machines F 6 x 2º Drains, small pipes with limestone, soap and grease build up as well as general pipe cleaning applications. This nozzle is rated to, PSI. Attach and pull camera This nozzle is rated to, PSI. High Efficiency Low Efficiency 6 Water is channeled and shaped via the C orifice TOLL FREE TOLL FREE TOLL FREE (8)

13 WHAT MAKES A SMART NOZZLE TM TM Flow Diversion Technology SMART NOZZLE TYPICAL NOZZLE Flow Diversion Technology drastically reduces energy robbing turbulence by more effectively C (Ceramic, Conical, Cylindrical) Orifice Smart Nozzle Insert High Efficiency Low Efficiency Water is channeled and shaped via the C orifice TOLL FREE (8)

14 GAMAJET Product Cleaning SyStemS, i n C. Data Gamajet E-Z8 Tank Cleaner A faster, easier way to clean tanks. The E-Z8 provides the SAME flow as traditional, larger tank cleaners, but this new unit is lighter, shorter and narrower for much easier entry and maneuverability. The new Gamajet E-Z8 offers unparalleled ease of handling in a wide variety of tank cleaning applications. Safe Easy Handling Smaller in diameter than any other fluid driven unit with similar flow characteristics. No power assists required. Fits through small openings while maintaining the flow required to clean larger vessels. Light weight, smaller size makes unit easy to move and handle. Manufactured in the USA for reliability, technical support, and easy service. Durability New generation sealed gear technology provides up to double the life compared to current flo-thru lubrication design. Efficient - State of the art gearing, individually designed stators and nozzles, and proper lubrication insure maximum service life and cleaning efficiency. Easy access to all working parts Standard sizes, minimum number of connections assure simple maintenance. All parts in stock and available on short notice for shipment from our US factory. Compatibility Offers more choices for O-ring material to allow for greater fluid compatibility when using harsh chemicals. Economical Develops a pattern that is twice as tight as other larger tank cleaners, insuring a complete scouring of every square inch of a vessel with minimum use of energy and cleaning solutions. Twice the Life Tighter Spray Pattern All the Flow All in One Tank Cleaner Half the Weight Easier Maintenance Shorter in Length Material of Construction: 16 Stainless Steel Nozzle sizes: 1/, 9/2, 5/16, /8, and 7/16 Stators: Large, Small, LM, and LV Weight: 15 lbs. Length: 1 Minimum Entry Opening: -/ Dual Nozzle, 6-/ Triple Nozzle Inlet Connection: 1 ½ NPT Female/2 Quick Disconnect Male (2 NPT or Butt Weld Available) Flow Range: 25 to 1 gallons per minute Pressure range: 2 to 1 psig Pattern Coverage: 1-1/2º Dual Nozzle, 1º Triple Nozzle O-Ring Materials: Viton, EPDM, Zalak, Kalrez Minimum Full-Cycle Time: 8 Minutes Viton, Zalak, and Kalrez are registered trademarks of DuPont Dow Elastomers 8 because your business depends on clean tanks (8)

Product Data Gamajet E-Z8 Gamajet E-Z8 Inlet Connection: Construction - Design: Impeller & Final Shafts: Shaft & Gearbox Bushings: Bearings: 1 NPT-Female / 2 Quick-Disconnect Male.

15 Product Data Gamajet E-Z8 Gamajet E-Z8 Inlet Connection: Construction - Design: Impeller & Final Shafts: Shaft & Gearbox Bushings: Bearings: 1 NPT-Female / 2 Quick-Disconnect Male. Optional: 2 NPT Female Parts are machined from 16-L Stainless Steel investment castings or bar stock. For increased wear resistance, the input and output shafts are plasma-sprayed with a Chromium Oxide coating on Stainless Steel. Input shaft thrust is absorbed by a Tungsten carbide bushing. Gearbox bushings are carbon-filled Teflon or other non-cupric material. Bearings in the rotating tee and nozzle housings are selflubricating, carbon-fiber-reinforced polyphenylene sulfide. Bearing Cups: Main body castings are protected by replaceable 16-L Stainless Steel cups for extended frictional wear life. Static Seals: Dynamic Seals: Nozzles: Drive Mechanism: Planetary Gearhead: Lubricant: Operating & Maintenance: Warranty: O-Ring materials are selected for each application. Viton is standard with Kalrez, Zalak and EPDM available. Other materials can be supplied on special order. Rotary shaft and housing seals are spring-loaded, doublelipped and made of PTFE. They are reinforced for extra long wear and protection against leakage, abrasion and deposit build-up. Standard nozzle sizes 1/ (6.5 mm), 9/2 (7.1 mm), 5/16 (7.9 mm), /8 (9.5 mm), 7/16 (11.11 mm) (12.1 mm). Other nozzle sizes available upon request. The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the input shaft, the bottom of this shaft is connected to the inside of a sealed, planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane. The sealed planetary gearhead has an external casing made of steel, surface-anodized to become stainless. This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require any lubricant. All internal parts are hardened sintered steel, the end caps and output shaft are stainless steel. A food grade grease is inside (Halo-Guard FG-2) the sealed gearhead casing. No additional customer-supplied or user-maintained lubricant is needed. Complete operating and maintenance procedures are covered in a detailed instruction manual furnished with all machines. Ready availability of in-stock spare parts or kits, and the ease of on-site maintenance minimize the need for costly factory repairs. Prompt factory overhaul or repair service is always available. Replacement parts and service kits are stocked year round. Special 2-8 hour delivery available upon request at no extra charge. Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings, bearings, bushings, and seals are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse. This warranty shall not apply to any malfunction resulting from use of non-gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet Terms and Conditions of Sale. 877-GAMAJET because your business depends on clean tanks (8)

OEM Nozzles. Your Vactor dealer is. Vactor Manufacturing, Inc South Illinois Street Streator, IL U.S.A

OEM Nozzles. Your Vactor dealer is. Vactor Manufacturing, Inc South Illinois Street Streator, IL U.S.A Your Vactor dealer is Vactor Manufacturing, Inc. 1621 South Illinois Street Streator, IL 61364 U.S.A Tel: 815.672.3171 Fax: 815.672.2779 www.vactor.com Effective 09/06 Specifications subject to change