Sliding Door Systems 8.1

Transcription

1 Sliding Door Systems : 8.1

2 : 02 Our Philosophy Key to what we do at Beyerle is to design exclusive products that offer maximum functionality ensuring a lasting impression on you, our customers. We offer a wide range of products including sliding hardware for glass and wooden doors, door handles, shower fittings, even library ladders and table frames. Our main focus is on the manufacturing of stainless steel products, but we also work with brass and aluminum. We combine these materials with leather and wood, to create unique designs to fit into any interior. Our products are individually processed through turning, milling, stamping, pressing and pipe machining to ensure our customers receive a consistent and high quality product. Beyerle has been a family owned and operated business since 1995 committed to the development and production of quality hardware. Please share our enthusiasm for inspiration:quality Andreas Beyerle, Owner of ABP-Beyerle GmbH

3 Contents : 03 Barn door hardware, stainless steel, solid Sliding door sets, track rail, solid Page Trolley Page Track rails Page 24 Accessories: couplings, wall mounts, spacers, glass/ceiling fixtures, door stoppers, etc. Page Barn door hardware, stainless steel, Econoline (tubular) Overview Page 32 Sliding door-sets, tubular, satin and polished Page Trolley / Track rails, tubular Page Accessories: coupling, wall mount, spacers, glass/ceiling fixture, door stoppers, etc. Page Glass connecting systems Page Flat Track system Runway Page 48 Accessories: track rails, end caps, etc. Page 49 Sliding door systems for shower cabinets Page Base bottom roller systems Page Sliding Door Systems Aluminum AS 50 glass Page AS 50 wood Page 73 Profile rails Page 74 Parts of AS 50 Page 75 Corner locks, latch Page 76 Pull handles (extract) Page Lockable pull handles (extract) Page Flush pulls (extract) Page Legend: Designer fittings + / height + height tested UpGrade +/- Height adjustable. Bottom rolls with height adjustment (only up). These sliding doors are certified by Prüfinstitut ift (Rosenheim) Upgrade by Soft Tec dampers.

4 : 04 News Soft-Tec Smooth and safe movement characterizes our sliding door systems. To further increase the functionality of our units, we have developed a patented Sof Tec door damper and stop assist system to ensure doors close quietly and don t slam. Soft-Close mechanism Soft-Close for the base bottom roller systems can be customized for different door panel weights. This system is also available for our AS 50 aluminum system. The dampers are fitted with a short damping path to optimize the relation between the profile lengths and the door passage widths. Stoppers gently catch the door at any desired stopping point. However, customers who want even more security may achieve additional suspension with our Soft-Tec system.

5 News Runway : 05 The clean, straight lines of this new Flat Track System are especially compatible with stainless steel. Full Moon A Classic design round bottom roller for glass and wooden doors. Q-Box A Square bottom roller - a visual paradox.

6 : 06 Certificate from Intertek Stainless steel sets, solid (Extract) INTERTEK REPORT NO: MID-002rev1 Intertek Testing Services, Inc Murphy Drive Middleton, WI / Fax: EVALUATION OF Flatec Trolley Model USO132EF / Wall Mount Model USU EF Set FOR Beyerle US L.L.C. 709 Pickens Industrial Drive TEST STANDARD: Marietta, GA Per customer's specifications, using the following standard as a guideline: ANSI/BHMA A "American National Standard for Sliding and Folding Door Hardware". SAMPLES: Samples were identified by the client as Flatec Sliding Door System. Intertek identified the samples as MID Samples were sent directly from the client and were received in good condition on 7/3/2013. Testing was conducted at Intertek in Middleton, WI. TEST DATES: RESULTS: 9/17/2013 to 9/26/2013 with extended life cycle to 10/7/2013 COMPLIANT Retest Subsection Test Description Initial Test Results Test Results Replaces: INTERTEK REPORT NO: MID-002 Sliding door fittings in accordance with ANSI/BHMA A * The testing institute intertek has successfully tested our ABP-Beyerle sliding door top Hung Systems for glass or wooden doors. Systems with certificates include: Solid Track: Flatec!, Flatec II, Unotec Home, Tritec among others. Hollow Track: Flatec 4, Flatec 5, Antra I, Antra II, Project among others. 4 Heavy Sliding Doors Compliant 5 Sliding Doors N/A 6 Folding Doors N/A 7 Finish Tests N/A The attached summary and data are results of the product testing and evaluation. * Revision 1 - Updated extended life cycle performance. Prepared By: Report Reviewed By: Han Fossum, RL Mark Harrison Technician 1 - Hardware Senior Associate Engineer - Hardware Building Products Group Building Products Group This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Top Hung Systems Durability 175,000 cycles = Feet Door mass: 320 lbs (145 kg) Initial Friction: (~ 22 N ) Corrosion resistance: 240 h (salt spray test accordingto EN 1670) Report No: MID 002 Client: Beyerle Model: Flatec 2 Trolley Model USO130EF / Wall Mount Model USU EF ANSI/BHMA A /24/2013 Page 1 of 3 (Extract) *American National Standard for Sliding and Folding Door Hardware Sliding door fittings in accordance with EN1527:2013 The testing institute IFT Rosenheim has successfully tested our ABP-Beyerle sliding door Base bottom rollers for glass and wooden doors. Systems with certificates include: Silent Glam, Belans. Base Bottom Roller System Durability: 100,000 cycles = Feet Door mass: 330 lbs (150 kg) Initial Friction: (~ 3 N ) Corrosion resistance: 240 h (salt spray test according to EN 1670) Warning! Proper header or mounting beam must be installed for the full length of the sliding door rail to provide adequate support because of the weight of the sliding door system.

7 Timeless elegance : 07

8 : 08 Trolleys Sliding door trolleys for glass doors,for solid track rail Flatec I Page 10 Unotec Home Page 11 Tritec Page 12 Antra I (Hollow tracks) Page 13 Sliding door trolleys for wooden doors,for solid track rail Flatec I Page 14 Flatec II Page 15 Unotec Home Page 16 Tritec Page 17 Antra I (Hollow tracks) Page 18 Antra II (Hollow tracks) Page 19 Designer trolleys, for solid track rail Shield Glass Page 20 Duetec glass Page 22 Shield wood Page 20 Skater wood Page 21

9 Sliding Door Systems : 09 Sliding door systems for glass and wooden door panels, stainless steel, for solid track rail Name loading capacity Soft-Tec damper Testet acc. height adjustment Page Soft-Stop damper to BHMS Grade 1 Flatec, glass 320 lbs yes yes yes 10 Unotec Home, glass 320 lbs yes yes no 11 Tritec, glass 320 lbs yes yes yes 12 Antra I, glass (tubular) 320 lbs no yes yes 13 Flatec I, wood 320 lbs yes yes yes 14 Flatec II, wood 320 lbs yes yes no 15 Unotec Home, wood 320 lbs yes yes no 16 Tritec, wood 320 lbs yes yes yes 17 Antra I, wood (tubular) 320 lbs no yes yes 18 Antra II, wood (tubular) 320 lbs no yes no 19 Designer sliding sets for glass and wooden door panels, stainless steel, for solid track rail Shield glass / wood 220 lbs no no yes 20 Skater, wood 220 lbs no no no 21 Duetec, glass 132 lbs no no yes 22 Sliding door systems for glass and wooden door panels, stainless steel, for tubular track rail Project, glass / wood 320 lbs no yes no 33 Flatec lbs no yes yes 34 Flatec 4, polished 320 lbs no yes yes 35 Flatec lbs no yes no 36 Torole 132 lbs no no yes 37 Flat Track Systems,for glass and wooden door panels, stainless steel Runway 176 lbs no no yes 48 Base bottom rolls for glass and wooden door panels, stainless steel, Soft-Close Mechanism Silent Glam 330 lbs yes yes (tested acc. EN ) yes Belans 330 lbs yes yes (tested acc. EN ) yes 61 Deeply Move 176 lbs yes no no 62 Full Moon 330 lbs yes no yes 63 Q-Box 330 lbs yes no yes 64 Sliding Systems Aluminum AS 50, g lass 110 lb s yes no yes 74 AS 50, wood 110 lb s yes no yes 75

10 : 10 Flatec I Stainless steel sets, solid Trolley Flatec I for glass door panel Complete sets, standard model, t = 5/16-1/2 adjustable height, approx. +/- 1/8 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USO210EF, hangar bolts not included 2 trolleys Flatec I, glass, stainless steel, USU120DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, stainless steel, USO260EF 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU44DS-1800EF 70 7/8 29 1/2-35 7/16 USU44DS-2100EF 82 11/ / /8 USU44DS-2300EF 90 9/ /4-44 1/16 USU44DS-2540EF /2-49 3/16 Glass drill holes, ø 1/2 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > + / height tested ø " " ø 1" 9 3/16 1 8" " " 1 " " " " 4 " 4 " ø ½" " " 7 8 " (1" ") ½ " (3 8" 5 16") 13 16" ¼ "- 3 8" " "

11 Unotec Home Stainless steel sets, solid : 11 Trolley Unotec Home for glass door panel Complete sets, standard model, t = 5/16-1/2 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU210EF, hangar bolts not included 2 trolleys Unotec Home, glass, stainless steel, USH100DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, stainless steel, USO260EF 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU34DS-1800EF 70 7/8 29 1/2-35 7/16 USU34DS-2100EF 82 11/ / /8 USU34DS-2300EF 90 9/ /4-44 1/16 USU34DS-2540EF /2-49 3/16 Glass drill holes ø 1/2 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > tested ø " " ø 1" " 999/16 ¼" " 3 16" ø2 3 8 " " 1 " " 7 8 " (1" ") ¼ "- 3 8" " " ½ " (3 8" 5 16") " 4" 4" ø ½" " " "

12 : 12 Stainless steel sets, solid Tritec Trolley Tritec for glass door panel Complete sets, standard model, t = 5/16-1/2 adjustable height, approx. +/- 1/8 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USO210EF, hangar bolts not included 2 trolleys Tritec, glass, stainless steel, USU122DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, stainless steel, USO260EF 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU64DS-1800EF 70 7/8 29 1/2-35 7/16 USU64DS-2100EF 82 11/ / /8 USU64DS-2300EF 90 9/ /4-44 1/16 USU64DS-2540EF /2-49 3/16 Glass drill holes ø 1/2 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > + / height tested ø " " ø 1" " 7 1/ " " 23 8 " " 1 " " 7 8 " (1" 11 16") ¼ "- 3 8" " ½ " (3 8" 5 16") " " " " ø ½" " " "

13 Antra I Stainless steel sets, tubular, dark bronze Trolley Antra I for glass door panel : 13 Complete sets, standard model, t = 5/16-1/2 adjustable height, approx. +/- 1/8, consisting of: 1 track rail (tube), stainless steel - dark bronze, ø 1, USO202DB length: see table 4-5 wall attachments, stainless steel - dark bronze, USU211DB, hangar bolts not included 2 trolleys Antra I glass, stainless steel - dark bronze, USO126DB 2 door stoppers, stainless steel - dark bronze, USO254DB 1 bottom guide, stainless steel - dark bronze, USO260DB 1 Allen key (SW5), Z926 1 installation instruction Set numbers track rail length passage width inch inch USU DB 70 7/8 29 1/2-35 7/16 USU DB 82 11/ / /8 USU DB 90 9/ /4-44 1/16 USU DB /2-49 3/16 Glass drill holes ø 33/64 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer, (USO226-19DB) separately for each wall attachment. Please find planning guides and installation instructions at + Special lengths of track rails, other individual components and accessories are available Tested according to ANSI/BHMA A / height tested ø " " ø 1" 9 3/16 1 8" " " 1 " " 7 8 " (1" ") " " ½ " (3 8" 5 16") 4 " 4 " ø ½" " " 13 16" ¼ "- 3 8" " "

14 : 14 Stainless steel sets, solid Flatec I Trolley Flatec 1 for wooden door panel Complete sets, standard model, t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU215EF, hangar bolts not included 2 trolleys Flatec I wood, stainless steel, USO121DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, plastic, USH268K 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU45DS-1800EF 70 7/8 29 1/2-35 7/16 USU45DS-2100EF 82 11/ / /8 USU45DS-2300EF 90 9/ /4-44 1/16 USU45DS-2540EF /2-49 3/16 Wood drill holes ø 13/32 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > + / height tested ø " 1 3 8" ø 1" 13 16" 9 1 8" 2 3 8" 2 3 8" 1" " ¼" ¼"-3 8" " " 1 ¾" " 4 " 4 " ø ½" " " 1 1 8"

15 Flatec II Stainless steel sets, solid Trolley Flatec II for wooden door panel : 15 Complete sets, standard model, t = 1 7/16-1 3/4 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU215EF, hangar bolts not included 2 trolleys Flatec II wood, stainless steel, USO130DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, plastic, USH268K 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU55DS-1800EF 70 7/8 29 1/2-35 7/16 USU55DS-2100EF 82 11/ / /8 USU55DS-2300EF 90 9/ /4-44 1/16 USU55DS-2540EF /2-49 3/16 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to EN 1527 : 2013 > Soft-Tec > tested ø " 1 3 8" " ø23 8" 2 3 8" 1" 11 16" ø ¼" 2 3 8" 2 3 8" 11 16" " " ¼" 1 ¾" 4" 4" ¼"-3 8" " 1 1 8"

16 : 16 Stainless steel sets, solid Unotec Home Trolley Unotec Home for wooden door panel Complete sets, standard model, t = 1 7/16-1 3/4 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU215EF, hangar bolts not included 2 trolleys Unotec Home, wood, stainless steel, USH105DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, plastic, USH268K 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU35DS-1800EF 70 7/8 29 1/2-35 7/16 USU35DS-2100EF 82 11/ / /8 USU35DS-2300EF 90 9/ /4-44 1/16 USU35DS-2540EF /2-49 3/16 Wood drill holes ø 13/32 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > tested ø " 1 3 8" ø 1" " " 9 ¼" ø2 3 8" 2 3 8" 1" " ¼" " " 1 ¾" 4 " 4 " ø 3 8" " " ø 3 16" ¼"-3 8" " 1 1 8"

17 Tritec Stainless steel sets, solid Trolley Tritec for wooden door panel : 17 Complete sets, standard model, t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU215EF, hangar bolts not included 2 trolleys Tritec wood, stainless steel, USO123DS-EF 2 door stoppers, stainless steel, USO290EF 1 bottom guide, plastic, USH268K 1 special tool for decorative screws, Z923 1 installation instruction Set numbers track rail length passage width inch inch USU65DS-1800EF 70 7/8 29 1/2-35 7/16 USU65DS-2100EF 82 11/ / /8 USU65DS-2300EF 90 9/ /4-44 1/16 USU65DS-2540EF /2-49 3/16 Wood drill holes ø 13/32 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A > Soft-Tec > + / height tested ø " 1 3 8" ø 1" " ø23 8 " " 1 " " " " " " 31 8 " " ¼" " ¼ "- 3 8" 1 ¾" " ø 8 3" " 1 1 8"

18 : 18 Antra I Stainless steel sets, tubular, Dark Bronze Trolley Antra I for wooden door panel Complete sets, standard model, t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8 consisting of: 1 track rail (tube), stainless steel - dark bronze, ø 1, USO202DB length: see table 4-5 wall attachments, stainless steel - dark bronze, USU213DB, hangar bolts not included 2 trolleys Antra I wood, stainless steel - dark bronze, USO129DB 2 door stoppers, stainless steel - dark bronze, USO254DB 1 bottom guide, plastic, USH268K 1 Allen key (SW5), Z926 1 installation instruction Set numbers track rail length passage width inch inch USU DB 70 7/8 29 1/2-35 7/16 USU DB 82 11/ / /8 USU DB 90 9/ /4-44 1/16 USU DB /2-49 3/16 Wood drill holes ø 13/32 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer, (USO226-33DB) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A / height tested ø2 5 16" 1 3 8" ø1" 9 1 8" ø 2 3 8" 2 3 8" 1" ¼" " " " 1 ¾" 4" 4" ø 3 8" " " 13 16" ¼"-3 8" " 1 1 8"

19 Antra II Stainless steel sets, tubular, Dark Bronze Trolley Antra II for wooden door panel : 19 Complete sets, standard model, t = 1 7/16-1 3/4 consisting of: 1 track rail (tube), stainless steel - dark bronze, ø 1, USO202DB length: see table 4-5 wall attachments, stainless steel - dark bronze, USO213DB, hangar bolts not included 2 trolleys Antra II wood, stainless steel - dark bronze, USO131DS-DB 2 door stoppers, stainless steel - dark bronze, USO254DB 1 bottom guide, plastic, USH268K 1 Allen key (SW5), Z926 1 installation instruction Set numbers track rail length passage width inch inch USU DB 70 7/8 29 1/2-35 7/16 USU DB 82 11/ / /8 USU DB 90 9/ /4-44 1/16 USU DB /2-49 3/16 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer, (USO226-33DB) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 22 Tested according to ANSI/BHMA A tested ø " 1 3 8" ø 1" 2 3 8" " ø 2 3 8" 2 3 8" 1" ¼" " ¼"-3 8" 1 ¾" " 2 3 8" 2 3 8" 11 16" ø ¼" 11 16" 4" 4" 1 1 8"

20 : 20 Stainless steel sets, solid Shield Trolley Shield for glass and wooden door panel + / height Complete sets, adjustable height, approx. +/- 1/8 standard model for glass doors t = 5/16-1/2 standard model for wooden doors t = 1 7/16-1 3/4 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USU212EF glass, hangar bolts not included USU214EF wood, hangar bolts not included 2 trolleys Shield, stainless steel, USO140EF glass with cover, USO141EF wood with cover 2 door stoppers, stainless steel, USO252EO 1 bottom guide, stainless steel, USO260EF glass 1 bottom guide, plastic, USH268K wood 1 Allen key (SW5), Z926, 1 installation instruction Glass set track rail length passage width Numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Wood set track rail length passage width Numbers mm mm USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Glass drill holes ø 33/64, Wood drill holes ø 13/32 Maximum door weight 220 lbs (100 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF glass, USO226-33EF wood) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories, refer to page 22 ø " " " 4 " 4 " ø 1" 9 1 8" " 1" " 11 (13/9) v 7 8 " (1" ") ¼ "- 3 8" " " 8 ½ t (10/12) " (3 8" 5 16") " t v 5 16" " 3 8" 1" ½ " 7 8 " ø ½" " " ø " 13 8" " 1 3 8" ø 2 3 8" 4" 4" ø 1" 9 1 8" 2 3 8" 1" " ¼" " " 1 ¾" ø 25 64" " " ¼"-3 8" " 13 8" 1 1 8" Dimensions in mm are exact - Inches are approximate - Dimensional data not binding. by ABP-Beyerle GmbH - We reserve the right to alter specifications without notice version USO91 wood drilling pattern_us

21 Skater Stainless steel sets, solid Trolley Skater for wooden door panel : 21 Complete sets, standard model, t = 1 7/16-1 3/4 consisting of: 1 track rail, solid stainless steel, ø 1, USO200EF length: see table 3-4 wall attachments, stainless steel, USO214EF, hangar bolts not included 2 trolleys Skater, wood, stainless steel, USO150EF-B 2 door stoppers, stainless steel, USO253EF 1 bottom guide, plastic, USH268K 1 Allen key (SW5), Z926, 1 installation instruction Set numbers track rail length passage width inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Wood drill holes ø 13/32 Maximum door weight 220 lbs (100 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page " ø 1" ø 2 3 8" 4 ¾ " " 4 ¾ " " " " " " 1" " " ¼" 1 ¾" ¼"-3 8" " " ø 3 8" " 1 1 8"

22 : 22 Stainless steel sets, solid Trolleys 4" 2 3/16" 2 3/16" 9 3/16" 2 3/16" /16" /16" Art. No. Trolley, Flatec I USO120DS-EF for glass doors t = 5/16-1/2 USO121DS-EF for wooden doors t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8 satin stainless steel (AISI 303/304) Maximum door weight 320 lbs (145 kg), per pair Glass drill holes ø 1/2 Wood drill holes ø 13/32 4" Art. No. Trolley, Flatec II USO130DS-EF for wooden doors t = 1 7/16-1 3/4 without height adjustment satin stainless steel (AISI 303/304) 9/16" 9/16" 3 9/16" 4" 1 3/16" 1/4" Maximum door weight 320 lbs (145 kg), per pair 4" /16" 2 3/16" 9 9/16" 2 3/16" 2 3/16" 9 9/16" Art. No. Trolley, Unotec Home USH100DS-EF for glass doors t = 5/16-1/2 USH105DS-EF for wooden doors t = 1 7/16-1 3/4 without height adjustment satin stainless steel (AISI 303/304) Maximum door weight 320 lbs (145 kg), per pair Glass drill holes ø 1/2 Wood drill holes ø 13/32 2 3/8" 5 11/16" 2 3/16" " 7 1/16" " 7 1/16" Art. No. Trolley, Tritec USO122DS-EF for glass doors t = 5/16-1/2 USO123DS-EF for wooden doors t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8 satin stainless steel (AISI 303/304) Maximum door weight 320 lbs (145 kg), per pair Glass drill holes ø 1/2 Wood drill holes ø 13/32 Art. No. Trolley, Duetec USO110EF for glass doors t = 5/16-1/2 adjustable height, approx. +/- 1/8 satin stainless steel (AISI 303) 2 3/16" 9 3/4" Maximum door weight 132 lbs (60 kg), per pair Glass drill holes ø 1/2 4" 2 3/16"

23 Trolleys Stainless steel sets, tubular : /16 2 3/16 9 3/16 2 3/16 2 3/16 9 3/16 Art. No. Trolley, Antra I USO126DB for glass doors, t = 5/16-1/2 USO129DB for wooden doors, t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/8, Stainless steel - dark bronze coated Maximum door weight 320 lbs (145 kg), per pair Glass drill holes ø 33/64 Wood drill holes ø 13/32 4 Art. No. Trolley, Antra II USO131DS-DB for wooden doors,t = 1 7/16-1 3/4 without height adjustment, Stainless steel - dark bronze coated 9/16 3 9/16 9/16 4 9/16 1/4 Maximum door weight 320 lbs (145 kg), per pair New York: Trolley Flatec I, Door handle Impero, Flatec glass connector

24 : 24 Track rails Stainless steel sets, solid Track rail length " " " 100" 5 1 8" " " 5 1 8" 5 1 8" " " " 5 1 8" 5 1 8" 26 ¾" 26 ¾" 26 ¾" 5 1 8" 5 1 8" " " " 5 1 8" 5 1 8" " " " " 5 1 8" drilling distance Track rail ø 1, solid, satin stainless steel (AISI 303) one-piece, for single doors: Art. No. track rail length passage width number of wall mount USO EF 70 7/8 29 1/2-35 7/16 3 USO EF 82 11/ / /8 4 USO EF 90 9/ /4-44 1/16 4 USO EF /2-49 3/16 4 Track rail ø 1, solid, satin stainless steel (AISI 303) two-pieces, with coupling for bi-parting or larger doors: Art. No. track rail length passage width number of wall mount USO EF-US 118 1/8 55 1/ USO EF / /8 7 USO EF / /4-94 1/ " 5 1 8" " " " USO205EF Track rail ø 1, solid, custom made, two-pieces (or more), with couplings longer than 106 : USO200EF Please note length and drilling distance 5 1 8" max " 5 1 8" max " 1/8

25 Coupling Stainless steel sets, solid : 25 Ø 1" 2" 2" Art. No. USO205EF coupling, traversable ø 1, l = 3 5/16 for track rail USO200EF satin stainless steel (AISI 303) order only together with track rail Wall mount Art. No. Coupling, angle adjustable ø 1 3/4, L: 2 3/16 angle adjustment 90 to for track rail USO200EF solid, ø 1 mm Special order of Track rail satin stainless steel (AISI 303) ø 2 3/8 5/16-18UNC L ø 9/16 Art. No. USU210EF USU215EF Wall mount (5/16-18 UNC) for glass doors on masonry without trim and baseboard disk ø 2 3/8, distance l = 3/16 fasteners not included for wooden doors on masonry without trim and baseboard disk ø 2 3/8, distance l = 3/4 hangar bolts not included satin stainless steel (AISI 303) M8 5 16"-18UNC Ø 15 Ø 9 16" Art. No. Wall mount (5/16-18 UNC) for glass doors on masonry without trim and baseboard disk ø 2 3/8, distance l = 3/16 hangar bolts not included USU212EF satin stainless steel (AISI 303) USU211DB satin stainless steel - dark bronze coated L for wooden doors on masonry without trim and baseboard disk ø 2 3/8, distance l = 3/4 hangar bolts not included USU214EF satin stainless steel (AISI 303) USU213DB satin stainless steel - dark bronze coated Wall bracket, adjustable ø ¼ Art. No. USU310EF Wall mount, adjustable for glass doors on masonry for track rail USO200EF, solid ø 1 walldisk +/- 3/16 adjustable in height and +/- 3/16 adjustable in width. hangar bolts not included hook wrench Z932 is necessary (see page 30) ½

26 : 26 Stainless steel sets, solid Wall bracket, adjustable 13/16" Art. No. USO242EF Wall mount, adjustable for track rail USO200EF wall clearance can be adjusted approx. 1/4, attachment point using elongated hole, satin stainless steel (AISI 303) 5/16" ø 1 1/2" 1 1/2" - 1 3/4" Wall mount, end face 5/16" 8 13/16" 13/16" Art. No. USO240EF Wall bracket, end face for track rail USO200EF attachment point is adjustable using elongated hole, satin stainless steel (AISI 303) Spacer disk drywall Ø 1 1/2" 2 3/8" 90 ø ½ ½ ø ¼ ø ¼ Art. No. Spacer disk-set, for drywall USO213K thickness: 1/2 / 1/8 for strong track rail mounting on a support frame for dry wall drill hole in drywall with ø 2 3/16-2 1/8, plastic 2 Spacer L ø 5/16" ø 9/16" Art. No. Spacer ø 9/16 for glass doors with baseboards and casing, distance l = 3/4 USO226-19EF satin stainless steel (AISI 303) or USO226-19DB satin stainless steel -dark bronze coated for wooden doors with baseboards and casing, distance l = 1 5/16 USO226-33EF satin stainless steel (AISI 303) or USO226-33DB satin stainless steel - dark bronze coated ø 5/16" ø 9/16" t Art. No. Spacer disk ø 9/16 to compensate wall unevenness, only one piece per wall mount! satin stainless steel (AISI 303), solid USO216-2EF thickness t = 1/16 USO216-5EF thickness t = 3/16 USO216-10EF thickness t = 3/8 or stainless steel - dark bronze coated USO216-2DB thickness t = 1/16 USO216-5DB thickness t = 3/16 USO216-10DB thickness t = 3/8

27 Glass mount Stainless steel sets, solid : 27 Ceiling mount L Art. No. Glassmount set USO230-G for glass doors t = 5/16-1/2 distance l = 3/16 decorative screw ø 1 3/16 for mounting the track rail USO200EF onto glass panel glass protection set satin stainless steel (AISI 303) Glass drill holes ø 9/16 + 1/ ¼ ø 2 ½ ø1 3 8 Art. No. USU348EF Ceiling mount for single track rail USO200EF prepared for glass door t = 5/16-1/2 satin stainless steel (AISI 303) USU348H-EF Additional kit for wooden doors t = 1 7/16-1 3/4 ø ø 7 8 ø 2 ½ 1 ¼ ø1 ø13 8 Art. No. USU349EF Ceiling mount for double track rails USO200EF prepared for glass door t = 5/16-1/2 satin stainless steel (AISI 303) USU349H-EF Additional kit for wooden doors t = 1 7/16-1 3/ ø 7 8

28 : 28 Stainless steel sets, solid Damper set Our trolleys are characterised by their particularly smooth and safe movement, which corresponds with the specific norms. The special stoppers catch any door fitting. One of our own patented developments is the Soft-Tec damper. It combines a damping effect when opening the door with a stopping aid. The system can be used in the initial assembly and for retrofitting. The system is available for the trolley systems: glass doors: Flatec I, Unotec Home, Tritec wooden doors: Flatec I, Flatec II, Unotec Home, Tritec. Art.No. USO290EF Soft-Tec Damper set for Unotec Home, Tritec pair of Soft-Tec damper stop, door weight lbs (30-60 kg) satin stainless steel (AISI 303/304) Soft-Tec Damper set for Flatec 1 / pair of Soft-Tec damper stop door weight lbs (30-60 kg) satin stainless steel (AISI 303/304) Replacement damper for door weight lbs (15-30 kg) ø1 7 8 ø Door stoppers L ø 1 9/16 Art. No. USO250EF USO251EF Door stopper for Unotec Home/Objekt ø 1 3/16 mm, length l = 2 1/4 for Flatec, Duetec, Tritec ø 1 3/16, length l = 1 3/4 rubber, satin stainless steel (AISI 303) 1 3/4 ø 1 9/16 Art. No. Door stopper USO254DB for Antra l = 1 3/4 rubber, satin stainless steel - dark bronze coated

29 Stainless steel sets, solid : 29 Door stoppers, for biparting panels Art. No. Door stopper set USO255EF 1 pair for for biparting panels, ø 1 stopper adjustable satin stainless steel (AISI 303), rubber Glass drill holes ø 1/2 + 1/64 4 1/4" 4 1/4" 4 1/4" Glass drill holes ø 1/2" Glass drill holes ø 1/2" Glass drill holes ø 1/2" ø 1" ø 1" ø 1" 4" 4" 4" 1 9/16" 2 1/16" 2 1/16" 2 1/16" 1 9/16" 1 9/16" ¼ 1¼ Art. No. USO257EF Door stopper set 1 pair for biparting panels, L = 4 31/32, satin stainless steel (AISI 303) Glass drill holes ø 31/64 + 1/64 suitable Allen key (SW5), Z926 order separately ¼ ø ø Bottom guides 1 1/2" 3/4" Art. No. Bottom guide for glass doors for a door panel thickness t = 5/16-1/2 with felt insert USO260EF satin stainless steel (AISI 304) USO260DB satin stainless steel - dark bronze coated 1 3/16" 2 1/2" 3/16" 13/16" Art. No. Bottom guide for wooden door panels USH268K for door panel thickness t up to 13/4, plastic panel channel for bottom guides 5/16 x 11/16 Ø 3/16" 1 1/8" 1/4"

30 : 30 Stainless steel sets, solid / tubular Mounting tools ø Art. No. Assembly aid Snap-on for hexagon to suit 4 hole wall brackets ø Spanner head for hexagon to suit 4 hole screws on runners Art. No. Z923 Calliper face spanner S for mounting decorative caps and 4 hole screws, (adjustable) Art. No. Z926 Allen key SW5 for mounting decorative caps and screws with internal hexagon SW 5 Art. No. Hook wrench Z931 for wall/glass brackets ø 1 3/4 Z932 for wall/glass brackets ø 2 3/16 Z924 for Flatec glass connector

31 Econoline Stainless steel sets, tubular : 31

32 Intertek Testing Services, Inc Murphy Drive Middleton, WI : 32 Stainless steel sets, tubular Trolleys For glass doors For wooden doors Project glass Flatec 4 glass Flatec 4 glass Project wood Flatec 4 wood Flatec 4 wood Flatec 5 wood polished polished Torole Name capacity tested according to EN 1527 : 2013 adjustable height page Project glass 320 lbs (145 kg) yes no 33 Flatec 4 glass 320 lbs (145 kg) yes yes 34 Flatec 4 glass polished 320 lbs (145 kg) yes yes 35 Project wood 320 lbs (145 kg) yes no 33 Flatec 4 wood 320 lbs (145 kg) yes yes 34 Flatec 4 wood polished 320 lbs (145 kg) yes yes 35 Flatec 5 wood 320 lbs (145 kg) yes no 36 Torole 132 lbs (60 kg) no yes 37 INTERTEK REPORT NO: MID-002rev1 Replaces: INTERTEK REPORT NO: MID / Fax: EVALUATION OF Flatec Trolley Model USO132EF / Wall Mount Model USU EF Set FOR Beyerle US L.L.C. 709 Pickens Industrial Drive TEST STANDARD: Marietta, GA Per customer's specifications, using the following standard as a guideline: ANSI/BHMA A "American National Standard for Sliding and Folding Door Hardware". SAMPLES: Samples were identified by the client as Flatec Sliding Door System. Intertek identified the samples as MID Samples were sent directly from the client and were received in good condition on 7/3/2013. Testing was conducted at Intertek in Middleton, WI. TEST DATES: RESULTS: 9/17/2013 to 9/26/2013 with extended life cycle to 10/7/2013 COMPLIANT Subsection Test Description Initial 4 Test Results Retest Heavy Sliding Doors Test Results 5 Compliant Sliding Doors 6 N/A Folding Doors 7 N/A N/A The attached summary and data are results of the product testing and evaluation. * Revision 1 - Updated extended life cycle performance. Finish Tests Prepared By: Report Reviewed By: Han Fossum, RL Mark Harrison Technician 1 - Hardware Senior Associate Engineer - Hardware Building Products Group Building Products Group This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Report No: MID 002 Client: Beyerle Model: Flatec 2 Trolley Model USO130EF / Wall Mount Model USU EF ANSI/BHMA A /24/2013 Page 1 of 3 Sliding door fittings acc. with ANSI/BHMA A The testing institute intertek has successfully tested our ABP- Beyerle sliding door systems for glass or wooden doors. Certificates are available for the following systems: Flatec 1, Flatec 2, Unotec Home, Tritec, Antra I, Antra II, Flatec 4, Flatec 5, Project, Silent Glam, Belans. Functional for at least cycles= Feet Door weight: 320 lbs (145 kg) Corrosion resistance: 240 h salt spray fog Initial friction: less than or equal to 22N (with a 320 lbs (145 kg) door) Further information page 6.

33 Project Stainless steel sets, tubular : 33 Trolley Project for glass and wooden door panels tested Complete sets, standard model for glass doors, t = 5/16-1/2 Complete sets, standard model for wooden doors, t = 1 7/16-1 3/4 consisting of: 1 track rail, tube, stainless steel, ø 1, USO202EF length: see table 4-5 wall attachments, stainless steel, hangar bolts not included USU228EF glass USU227EF wood 2 trolleys Project, stainless steel, USO124EF for glass, USO125EF wood 2 door stoppers, stainless steel, USO256EF 1 bottom guide, stainless steel, USO261EF glass 1 bottom guide, plastic, USH268K wood 1 Allen key (SW5), Z926, 1 installation instruction Glass set track rail length passage width Set numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Wood set track rail length passage width Set numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Glass drill holes ø 9/16 + 1/64 Wood drill holes ø 3/8 + 1/64 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF glass, USO226-33EF wood) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories, refer to page 38 Tested acc. to ANSI/BHMA A " ø " 1" " " 9 1 8" " " 1" " 7 8 " (1" 11 16") ¼ "- 3 8" " " ½ " (3 8" 5 16") " 4 " 4 " ø 19/32" 2 3/16 " 2 3/16 " 13 16" " ø " 1 3 8" ø 1" " " 9 1 8" " 2 3 8" 2 3 8" 1" ¼" ¼"-3 8" " " 1 ¾" " 4 " 4 " ø 25/64" 2 3/16 " 2 3/16 " 13 16" 1 1 8" USO95_US USO97-glass drilling pattern_us

34 : 34 Stainless steel sets, tubular Flatec 4 + / height tested Flatec 4 for glass and wooden door panel Complete sets, adjustable height, approx. +/- 1/64 standard model for glass doors, t = 5/16-1/2 standard model for wooden doors, t = 1 7/16-1 3/4 consisting of: 1 track rail, tube, stainless steel, ø 1, USO202EF length: see table 4-5 wall attachments, stainless steel, hangar bolts not included USU228EF glass, USU227EF wood 2 trolleys Flatec 4, stainless steel, USO127EF for glass, USO128EF for wood 2 door stoppers, stainless steel, USO256EF 1 bottom guide, stainless steel, USO261EF, glass 1 bottom guide, plastic, USH268K, wood 1 Allen key (SW5), Z926, 1 installation instruction Glass set track rail length passage width Numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Wood set track rail length passage width Numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Glass drill holes ø 1/2 + 1/64 Wood drill holes ø 3/8 + 1/64 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EF glass, USO226-33EF wood) separately for each wall attachment.. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories, refer to page 38 Tested acc. to ANSI/BHMA A ø " " ø 1" USO94_US 13 16" " 9 1 8" " ø2 3 8 " " 1" " " 7 8 " (1" 11 16") ½ " (3 8" 5 16") ¼ "- 3 8" " " 4 " 4 " ø ½" " " ø 1" ø " " " 9 1 8" ø2 3 8" 2 3 8" 1" ¼" ¼"-3 8" 1 3 8" " " 1 ¾" " USO94-glass drilling pattern_us 4 " 4 " ø 3 8" " " Dimensions in mm are exact - Inches are approximate - Dimensional data not binding. by ABP-Beyerle GmbH - We reserve the right to alter specifications without notice version " USO95_US 1 1 8" Dimensions in mm are exact - Inches are approximate - Dimensional data not binding. by ABP-Beyerle GmbH - We reserve the right to alter specifications without notice version USO95 wood drilling pattern_us

35 Flatec 4 polished Stainless steel sets, tubular : 35 + / height tested Flatec 4 polished for glass and wooden door panel Complete sets, adjustable height, approx. +/- 1/64 standard model for glass doors, t = 5/16-1/2 standard model for wooden doors, t = 1 7/16-1 3/4 consisting of 1 track rail, tube, stainless steel, ø 1, USO202EP length: see table 4-5 wall attachments, stainless steel, hangar bolts not included USU228EP glass, USU227EP wood 2 trolleys Flatec 4, stainless steel, USO127EP for glass, USO128EP for wood 2 door stoppers, stainless steel, USO256EP 1 bottom guide, stainless steel, USO261EP, glass 1 bottom guide, plastic, USH268K, wood 1 Allen key (SW5), Z926, 1 installation instruction Glass set Track rail length Passage width Set numbers inch inch USU EP 70 7/8 29 1/2-35 7/16 USU EP 82 11/ / /8 USU EP 90 9/ /4-44 1/16 USU EP /2-49 3/16 Wood set Track rail length Passage width Set numbers inch inch USU EP 70 7/8 29 1/2-35 7/16 USU EP 82 11/ / /8 USU EP 90 9/ /4-44 1/16 USU EP /2-49 3/16 Glass drill holes ø 1/2 + 1/64 Wood drill holes ø 3/8 + 1/64 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-19EP glass, USO226-33EP wood) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories, refer to page 38 Tested acc. to ANSI/BHMA A ø " " ø 1" " 9 1 8" " ø2 3 8 " " 1" " " 7 8 " (1" 11 16") ½ " (3 8" 5 16") ¼ "- 3 8" " 4 " 4 " ø ½" " " USO94_US 13 16" ø " " 1 3 8" USO94-glass drilling pattern_us ø 1" " " 9 1 8" ø2 3 8" 2 3 8" 1" ¼" " " 1 ¾" 4 " 4 " ø 3 8" " " 13 16" Dimensions in mm are exact - Inches are approximate - Dimensional data not binding. by ABP-Beyerle GmbH - We reserve the right to alter specifications without notice version ¼"-3 8" " 1 1 8" Dimensions in mm are exact - Inches are approximate - Dimensional data not binding. by ABP-Beyerle GmbH - We reserve the right to alter specifications without notice version USO95_US USO95 wood drilling pattern_us

36 : 36 Stainless steel sets, tubular Flatec 5 Trolley Flatec 5 for wooden panels Complete sets, standard model, t = 5/16-1/2 unadjustable height, consisting of: 1 track rail, tube, stainless steel, ø 1, USO202EF length: see table 4-5 wall attachments, stainless steel, USU227EF, fasteners not included 2 trolleys Flatec 5 wood, stainless steel, USO132DS-EF 2 door stoppers, stainless steel, USO256EF 1 bottom guide, plastic, USH268K 1 Allen key (SW5), Z926 1 installation instruction Set numbers track rail length passage width t = 5 /16-1/2 inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Maximum door weight 320 lbs (145 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 38 Tested acc. to ANSI/BHMA A tested ø " 1 3 8" " ø2 3 8" 2 3 8" 1" ¼" 2 3 8" 2 3 8" 11 16" ø ¼" 11 16" 4" 4" 4" " ¼"-3 8" 1 ¾" " 1 1 8"

37 Torole Stainless steel sets, tubular : 37 Trolley Torole for wooden panels Complete sets, standard model, t = 1 7/16-1 3/8 adjustable height, consisting of: 1 track rail, tube, stainless steel, ø 1, USO202EF length: see table 4-5 wall attachments, stainless steel, USU227EF, 2 trolleys Torole wood, stainless steel, USO321EF 2 door stoppers, stainless steel, 1 bottom guide, plastic, USH268K 1 Allen key (SW5), Z926 1 installation instruction Set numbers track rail length passage width inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Maximum door weight 132 lbs (60 kg) For baseboards and casing, order spacer (stainless steel, USO226-33EF) separately for each wall attachment. Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page 38 + / height ½ - 1 ¾ ø ¼ ½ - 1 ¾

38 : 38 Stainless steel sets, tubular Trolleys 4" 2 3/16" 2 3/16" 9 3/16" " " " Art. No. Trolley Project USO124EF for glass doors t = 5/16-1/2 USO125EF for wooden doors t = 1 7/16-1 3/4 no height adjustment, satin stainless steel (AISI 303/304) Maximum door weight 320 lbs (145 kg) (per pair) Glass drill holes ø 1/2 + 1/64 Wood drill holes ø 3/8 + 1/64 Art. No. Trolley Flatec 4 satin stainless steel (AISI 303/304) USO127EF for glass doors t = 5/16-1/2 USO128EF for wooden doors t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/64 4" 2 3/16" 2 3/16" 9 3/16" 3/16" 3/16" 9 3/16" Polished stainless steel: USO127EP for glass doors t = 5/16-1/2 USO128EP for wooden doors t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/64 Maximum door weight 320 lbs (145 kg) (per pair) Glass drill holes ø 1/2 + 1/64 Wood drill holes ø 3/8 + 1/ Art. No. Trolley Flatec 5 USO132DS-EF for wooden doors t = 1 7/16-1 3/4 satin stainless steel (AISI 303/304) Maximum door weight 320 lbs (145 kg) (per pair) Glass drill holes ø 1/2 + 1/64 Wood drill holes ø 3/8 + 1/ ½ - 1 ¾ Art. No. Trolley Torole USO321EF for wooden doors t = 1 7/16-1 3/4 adjustable height, approx. +/- 1/64 satin stainless steel (AISI 303/304) Maximum door weight 132 lbs (60 kg) (per pair) Wood drill holes ø 3/8 + 1/ ¾ ½ Art. No. Trolley, usage by pairs track rail: top wheel / bottom Top: Roller Bottom: anti-lift device USO322EF for glass doors 5/16-1/2 satin stainless steel (AISI 303/304) Maximum door weight 220 lbs (100 kg) (per pair) Glass drill holes ø 1/2 + 1/64

39 Stainless steel sets, tubular : 39 Track rail ( tubular) 5 1 8" " " " 5 1 8" " ¾" " " 5 1 8" 1 8" ¾"" 1 8" 2224 ¾"" 1 8" 2224 ¾"" 1 8" 5 1 8" 5 1 8" 5 1 8" " " " " 5 1 8" 5 1 8" " " " " 5 1 8" 100" 5 1 8" 27" 27" 27" 27" drilling distance Track rail ø 1, tubular, satin stainless steel (AISI 304) one-piece, for single doors: Art. No. track rail length passage width number of wall mount USO EF 70 7/ / /16 4 USO EF 82 11/ / /8 4 USO EF 90 9/ / /32 5 USO EF / /32 5 Track rail ø 1, tubular, satin stainless steel (AISI 304) two-piece, with coupling for biparting or larger doors: Art. No. track rail length passage width number of wall mount USO EF-US 118 1/8 55 1/ USO EF 144 3/ /8 8 USO EF / /4-94 1/ " 24" 5 1 8" 5 1 8" 5 1 8" " " USO207EF Track rail ø 1, custom made, two-pieces or more, with coupling longer than106 : USO202EF Please note length and drilling distance 5 1 8" max " " max "

40 : 40 Stainless steel sets. tubular Coupling ¼ Art. No. Coupling ø 11/4 1 ½ USO206EF for track rail (tubular) USO202EF non traversable satin stainless steel (AISI 303) 1 ¼ 1 Coupling USO207EF for track rail (tubular) USO202EF traversable satin stainless steel (AISI 303) ¼ Art. No. Angle coupling, flexible, ø 11/4 USO308EF angle adjustment 90 to 270, l = 23/8 for track rail (tubular) USO202EF, ø 1 non traversable satin stainless steel (AISI 303) Wall bracket Art. No. USU228EF Art. No. USU227EF Wall mount for glass doors on masonry without baseboards and trim disk ø = 2, distance l = 3/16 fasteners not included satin stainless steel (AISI 303) Wall mount for wooden doors on masonry without baseboards and trimmings disk ø = 2, distance l = 3/4 fasteners not included satin stainless steel (AISI 303) Wall bracket, adjustable ø ¼ Art. No. Wall mount, adjustable for track rail (tubular) ø 1 wall disk +/- 3/16 adjustable in height and +/- 3/16 adjustable in width hook wrench Z932 is necessary please order separately satin stainless steel (AISI 303) fasteners not included USU328EF for glass door panel t = 5/16-1/2 USU329EF for wooden door panel t = 1 7/16-1 3/4 ½

41 Spacer Stainless steel sets, tubular : 41 L ø 5/16" ø 9/16" Art. No. Spacer ø 9/16 for glass doors with baseboards and trimmings, distance l = 3/4 USO226-19EF satin stainless steel (AISI 303) or USO226-19DB satin stainless steel - dark bronze coated for wooden doors with baseboards and trimmings, distance l = 1 5/16 USO226-33EF satin stainless steel (AISI 303) or USO226-33DB satin stainless steel - dark bronze coated ø 5/16" ø 9/16" t Art. No. Spacer disk ø 9/16 to compensate wall unevenness, only one piece per wall mount satin stainless steel (AISI 303), solid USO216-2EF thickness t = 1/16 USO216-5EF thickness t = 3/16 USO216-10EF thickness t = 3/8 or satin stainless steel - dark bronze coated USO216-2DB thickness t = 1/16 USO216-5DB thickness t = 3/16 USO216-10DB thickness t = 3/8 Spacer disk for drywall 1 8 ½ ø11 32 ø1 ¼ Art. No. Spacer disk-set for drywall USU241K thickness: 1/2 / 1/8 For use with applications on drywall. To prevent settling and provide additional support at the attachment points, use spacer disk-set drill hole in drywall with ø 2 3/16-2 1/8, plastic Wall mount, end face ø 1 ¼ ø ¼ 1 ¼ Art. No. USU340EF Wall mount, end face for track rail (tubular) USO202EF attachment point can be adjustable using elongated hole, satin stainless steel (AISI 303) (one piece)

42 : 42 Stainless steel sets, tubular Ceiling mount 1 3/16" 2 5/16" 5/16" 1 1/8" 1/2" 4 1/8" 5/16" 4 3/4" 3/16" 3/8" 13/16" Art. No. Ceiling mount USO EF for single track rail (tubular) USO202EF attachment point can be adjustable using elongated hole prepared for glass door t = 5/16-1/2 satin stainless steel (AISI 303/304) USO248 -H additional kit for wooden doors (t = 1 7/16-1 3/4 ) 1 3/16" 4 1/4" 5/16" 1 15/16" 1/2" 1/2" 4 1/8" 5/16" 4 3/4" Art. No. Ceiling mount USO EF for by-passing rails (tubular) USO202EF attachment point can be adjustable using elongated hole prepared for glass door t = 5/16-1/2 satin stainless steel (AISI 303/304) 3/8" 3/16" 13/16" 13/16" USO249 -H additional kit for wooden doors (t = 1 7/16-1 3/4 ) Glass mount, adjustable Ø ± 13/64 t Art. No. USU330EF Glass mount set, ø 45 mm for track rail (tubular) USO202EF height and side adjustable (+/- 3/16 ) for glass doors t = 5/16-1/2 satin stainless steel (AISI 303) glass drill holes: ø = 11/16 hook wrench Z931 is necessary (see page 30) Glass mount, adjustable, countersunk Ø ± 13/64 t Art. No. Glass mount set, countersunk,ø 13/4 USU331EF for track rail (tubular) USO202EF height and side adjustable (+/- 3/16 ) for glass doors t = 5/16-1/2 satin stainless steel (AISI 303) glass d rill h oles ø 3 0 / 5 x 45 hook wrench Z931 is necessary (see page 30) Glass mount, non-adjustable ø ½ ø 9 16 Art. No. Glass mount set, ø 13/16 USO229EF for track rail (tubular) USO202EF including glass protection set for glass doors t = 5/16-1/2 satin stainless steel (AISI 303) glass drill holes ø 5/8

43 Stainless steel sets, tubular Glass mount, non adjustable, countersunk : Ø ½ 8-13 L 9 16 Ø 15 Art. No. Glass mount set, ø 13/16 USU332EF for track rail (tubular) USO202EF including glass protection set, for glass doors t = 5/16-1/2, satin stainless steel (AISI 303) glass drill holes ø 25/32 / 3/16 x 45 Glass mount, end face 1 ¼ 1 1 ¼ ½ Art. No. USU333EF Glass mount, end face for track rail (tubular) USO202EF attachment point can be adjustable using elongated hole, satin stainless steel (AISI 303) glass drill holes ø 36/64 Profile seal ½ ¼ Art. No. Profile for glass edge mounting for noise reduction by partition walls or reducing water seepage in the shower DTB2840K for glass door panel 1/4-5/6 DTB2845K for glass door panel 25/64-33/64 L: 82 11/16 PVC hard/soft combination, transparent

44 : 44 Stainless steel sets,tubular Soft Stop These simple Soft Stop dampers unite the functions of a damping effect when opening the door and a stopping aid. This system is suitable for initial application and for retrofitting. The Soft Stop damper is available for the following trolleys: Flatec 4 / ¼ Art. No. Softstop damper for trolleys Flatec 4 / 5 damping of the door impact with stopping aid Aluminum/satin stainless steel (AISI 303), rubber buffer maximum door weight lbs maximum door weight lbs Door stopper 1 3/4 ø 1 9/16 Art. No. Door stopper USO256EF for trolleys Flatec 4 / 5 l = 1 3/4 satin stainless steel (AISI 303) / rubber Door stopper for biparting glass panels Art. No. Door stopper set USO259EF 1 pair for biparting glass panels to be placed on the glass edges, for glass door panel t = 1/4 satin stainless steel (AISI 304)) 15 16

45 Bottom guides Stainless steel sets,tubular : /16 3/4 3/4 Art. No. Bottom guide for glass door panels USO261EF for door panel thickness t = 5/16-1/2, with felt insert satin stainless steel (AISI 304) 1 3/16" 2 1/2" 3/16" 13/16" Art. No. Bottom guide for wooden door panels USH268K for door panel thickness t up to 13/4, plastic panel channel for bottom guides 5/16 x 11/16 Ø 3/16" 1/4" 1 1/8" Door Guides, wall mounted Art. No. Door guide wall mounted USU360EF Door guide that mounts to wall, above ground surface height adjustable +/- 13/64 extension: 2 23/64 satin stainless steel (AISI 303/304), plastic for glass doors t = 5/16-1/ ø11 64 Art. No. USU361EF Door guide wall mounted Door guide that mounts to wall, above ground surface height adjustable +/- 13/64 extension: 3 35/64 satin stainless steel (AISI 303/304), plastic for wooden doors t = 1 7/16-1 3/ ¾

46 : 46 Fixed glazing Flatec glass-connectors glass-glass 180 -connector " " ø A A Art. No. ø GS A USO272EF 11/2 5/6-1/2 211/16 plain profile 71/16 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/6-1/2 (starting from 7/16 glass use thread pin M 3/8 x 1 ) glass protection set satin stainless steel (AISI 303/304) Distance A +/- 5/64 adjustable Glass drilling ø 23/32 + 1/64 Mounting with ø 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924) Art. No. ø GS A 90 -connector (inner angle) A " A ø " " USO274EF 11/2 5/6-1/2 211/16 plain profile 3 19/32 / 3 19/32 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/16-1/2 (starting from 7/16 glass use thread pin M 3/8 x 1 ) glass protection set satin stainless steel (AISI 303/304) Distance A +/- 1/8 adjustable Glass drilling ø 23/32 + 1/64 Mounting with ø 5/32 mm cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924) 90 -angle-connector (outer angle) ø Art. No. ø GS A USO274EF-AB 11/2 5/6-1/2 211/ " A " " A plain profile 4 3/32 / 4 3/32 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/16-1/2 (starting from 15/32 glass use thread pin M 3/8 x 1 ) glass protection set satin stainless steel (AISI 303/304) Distance A +/- 1/8 adjustable Glass drill holes ø 23/32 + 1/64 Mounting with ø 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924) 3 -hole-connector skylight Art. No. ø GS A A2 ø " USO275L-EF 11/2 5/6-1/2 211/16 37/32 USO275R-EF 11/2 5/6-1/2 211/16 37/32 A2 A A2 A A 1 R A " 9 16" L plain profile 7 1/16 / 4 15/16 x 1 9/16, chamfered framed edge (one-sided), notice: right hand and left hand item!), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/16-1/2, glass protection set satin stainless steel (AISI 303/304) Distance A only one-sided +/- 1/8 adjustable (for skylight), the other one and A2 are fixed Glass drill holes ø 23/32 + 1/64 Mounting with ø 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924)

47 Fixed glazing Flatec glass-connectors glass-glass Art. No. ø GS A USO273EF 11/2 5/6-1/2 211/16 T-Connector (90 -angle) A " " A A ø " " : 47 2 x plain p rofiles 3 19/32 / 3 19/32 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4, decorative caps ø 11/2 with 4 tightening holes, glass thickness GS = 5/6-1/2 (starting from 3/8 glass use thread pin M 3/8 x 1 ), glass protection set satin stainless steel (AISI 303/304) Distance A +/- 1/8 adjustable Glass drilling ø 23/32 + 1/64 Mounting with 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924) glass-wall Art. No. ø GS A A2 90 -Connector M 10 USO " A ø " " A " USO270EF 11/2 5/6-1/2 211/16 117/32 plain profile 3 19/32 / 2 7/16 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/6-1/2 (starting from 7/16 glass use thread pin M 3/8 x 1 ) glass protection set satin stainless steel (AISI 303/304) Distance A +/- 1/8 adjustable Glass drilling ø 23/32 + 1/64 Mounting with ø 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924) glass-floor Art. No. ø GS A A /2 5/6-1/2 211/16 117/ ½ 1 ½ plain profile 3 19/32 x 19/16, chamfered framed edge (one-sided), material thickness t = 1/4 decorative caps ø 11/2 with 4 tightening holes glass thickness GS = 5/6-1/2 (starting from 7/16 glass use thread pin M 3/8 x 1 ) glass protection set satin stainless steel (AISI 303/304) Distance A +/- 1/8 adjustable Glass drilling ø 23/32 + 1/64 Mounting with ø 5/32 cylinder bolt or hook wrench - DIN 1816 (Art. No. Z924)

48 : 48 Flat Track sets, stainless steel Runway Runway for glass and wooden doors Complete sets, adjustable height, approx. +/- 1/8 standard model for glass doors t = 5/16-1/2 standard model for wooden doors t = 1 7/16-1 3/4 consisting of: 1 track rail, tubular, stainless steel, 19/16 / 3/8 length: see table next page 3-4 wall attachments, stainless steel, USO311EF, no fasteners included 2 Trolleys, stainless steel, USO323EF glass, or USO324EF wood 2 door stoppers, stainless steel, USO362EF 1 bottom guide, stainless steel, USO261EF glass 1 bottom guide, Plastic, USH268K wood 1 Allen key (SW5), Z926, 1 installation instruction Glass-set track rail length passage width Numbers inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Wood set track rail length passage width Number inch inch USU EF 70 7/8 29 1/2-35 7/16 USU EF 82 11/ / /8 USU EF 90 9/ /4-44 1/16 USU EF /2-49 3/16 Maximum door weight 176 lbs (80 kg) Please find planning guides and installation instructions at Individual components and accessories, refer to page 49 + / height ½ 7 ½ Ø ½ ½ ¼ ¾ ¼ 1 1 8

49 Track rails 5 1 8" B Bmax " B B 5 1 8" A max " stainless steel sets Art.Nr. Special track rail for Runway /64 / 25/64 satin stainless steel (AISI 304) please notice drilling distance : 49 Trolley ½ ¾ Art. No. Trolley USO323EF for glass doors t = 5/16-1/2 USO324EF for wooden doors t = 1 7/16-1 3/4 Maximum door weight 176 lbs (80 kg) (using pairs) Glass drill holes ø 15/32 + 1/64 Wood drill holes ø 3/8 + 1/64 ¼ Wall mount ½ Art. No. USO311EF Wall mount for glass door t = 5/16-1/2 on masonry for wooden door t = 1 7/16-1 3/4 on masonry without baseboards and trimmings height adjustable +/- 1/8 with screws aluminum anodized Door stopper Bottom guides ½ /16 3/4 3/4 Art. No. USO362EF Door stopper pair of stoppers (left-right) for glass door t = 5/16-1/2 for wooden door t: 1 7/16-1 3/4 measure: 2 / 1 9/16 satin stainless steel (AISI 304) Art. No. Bottom guide for glass doors USO261EF for door panel thickness t = 5/16-1/2, with felt insert satin stainless steel (AISI 304) 1 3/16" Ø 3/16" 2 1/2" 13/16" 3/16" 1 1/8" Art. No. Bottom guide for wooden doors USH268K for door panel thickness t > 13/16, plastic panel channel for bottom guides 5/16 x 11/16 1/4"

50 : 50 Shower sliding door sets Shower fittings

51 Urban Slide III Shower sliding door sets : 51 Art. No. Urban Slide III Set consisting of: 4 trolleys 2 stoppers gap between glasses: 1 37/64 1 bottom guide polished chrome: for 1/4-5/6 glass thickness for 23/64-33/64 glass thickness satin stainless steel: for glass thickness 1/4-5/ for glass thickness 23/64-33/64 Art. No. Glass holder for mounting the track rail on a fixed glass sheet polished chrome: for glass thickness 1/4-33/64 satin stainless steel: for glass thickness 1/4-33/64 For each installation order the hardware set (e.g ), the glass holder (e.g ) and a track rail (see page 54) separately. + Further individual components page B H ½ ½

52 : 52 Shower sliding door sets Urban Slide I Art. No. Urban Slide I Set consisting of: 2 pcs. rail wheel 2 pcs. anti lift device 1 bottom guides gap width: 35/64 polished chrome: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 satin stainless steel: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 Art. No. glass holder, for mounting the track rail on a fixed glass panel polished chrome: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 satin stainless steel: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 For each installation order the hardware set (e.g ), the glass holder (e.g ) and a track rail (see page 54) separately. + Further individual components page ¼ ¼ ½ - ¼ ½

53 Urban Slide II Shower sliding door sets : 53 + Art. No. Urban Slide II Set consisting of: 2 pcs. trolley 2 pcs. door stopper 1 bottom guide polished chrome: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 satin stainless steel: for glass thicknesses 1/4-5/ for glass thicknesses 23/64-33/64 Art. No. glass holder (pair) for mounting the track rail on a glass sheet polished chrome: for glass thicknesses 1/4-33/64 satin stainless steel: for glass thicknesses 1/4-33/64 For each installation order the hardware set (e.g ), the glass holder (e.g ) and a track rail (see page 54) separately. + Further individual components page ¾ ½ ¼ - ½ 9 16 ¼ 1

54 : 54 Track rails Shower sliding door parts Art. No. Track rail for Urban I polished chrome, t = 1/ L: L: L: 72 satin stainless steel, t = 1/ L: L: L: ¼ ¼ Art. No. Track rail for Urban II and III polished chrome, t = 1/ L: L: L: 72 satin stainless steel, t = 1/ L: L: L: 72 3 ¾ ¾ ¾

55 Rail mount, end face Shower sliding door sets : ø ¼ ø 1 ¼ ¼ Art. No. Wall mount end face mounting of the track rail (ø 1 ) polished chrome satin stainless steel 1 1 ¼ ¼ Art. No. Attachment for glass profil one-sided mounting of the track rail (ø 1 ) polished chrome satin stainless steel ½ Angle joint ¼ ¼ Art. No. Angle joint for mounting two track rails at corners 90 joint polished chrome satin stainless steel ¼ joint polished chrome satin stainless steel Profile seal ½ ¼ Art. No. Profile for glass edge mounting for noise reduction by partition walls or reducing water seepage in the shower DTB2840K for glass door panel 1/4-5/6 DTB2845K for glass door panel 25/64-33/64 L: 8 17/64 PVC hard/soft combination, transparent Threshold guard Art. No. Threshold guard DTB2880K size: 1/4 / 1, L :40 for floor use reduces water seepage plastic

56 : 56 Base bottom roller Base bottom roller sets Silent Glam Silent Glam design with a large range of colour options Belans Belans the property fitting Full Moon Q-Box A round look with height adjustment Square roll modern design combined with sophisticated technology

57 Set Silent Glam Base bottom roller sets Standard set for glass and wooden doors : 57 Complete sets, for glass doors t = 5/16-1/2 Complete sets, for wooden doors t = 11/2-13/4, consisting of: tested UpGrade + height 1 guide profile, aluminum stainless steel optic USO82EO for ceiling mountings 1 stopper set USO82 -S 1 runner profile without drilling holes, satin stainless steel, USO86.2EF length: see table 1 pair of bottom rolls, satin stainless steel, USO400EF (glass) 1 pair of bottom rolls, satin stainless steel, USO401EF (wood) with two decorative inlays USO280EF 1 Allen key (SW2,5), Z927 1 installation instruction Glass-Set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Wood-Set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Maximum door weight 330 lbs (150 kg) Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page adjustable height + 1/4 Tested according to EN1527: " ø " 9 16" ¾" 1 ¾" 5 16" 100" 1" 1" ¾ " ¾ " 4" 3 16" " ¼" 3 8" " 13 16" " R 1 ¾ " R 1 ¾ " 4 " 4 " " " 4" ø " 9 16" 3 16" " 1 ¾" " " 100" " ¼" 3 8" " " " 1" 4 " R 1 ¾" R 1 ¾" " " " 9 16" 9 16" 4" 1" 13 16" " "

58 : 58 Base bottom roller sets Inlays Silent Glam You have many design options in the choice of colors for inlays with our Silent Glam bottom roller. Choose from various materials for your very own personal design - to match your interior. Base version Center inlay - satin stainless steel, USO280EF Outer inlay - white glass, USO281G003 Center inlay - black glass, USO280G004 Customized design. Outer inlay - black glass, USO281G004 Center inlay - satin stainless steel, USO280EF Outer inlay - black glass, USO281G004 Center inlay - white glass, USO280G003 Customized design. Customized design. Customized design. Customized design.

59 Set Belans Base bottom roller sets : 59 Standard set for glass and wooden doors Complete sets, for glass doors t = 5/16-1/2 Complete sets, for wooden doors t = 11/2-13/4, consisting of: tested UpGrade + height 1 guide profile, aluminum stainless steel optic USO82EO 1 stopper set USO82 -S 1 runner profile without drilling holes, satin stainless steel, USO86.2EF, length: see table 1 pair of bottom rolls, satin stainless steel, USO404EF (glass) 1 pair of bottom rolls, satin stainless steel, USO405EF (wood) 1 Allen key (SW2,5), Z927 1 installation instruction Glass set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Wood set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Maximum door weight 330 lbs (150 kg) Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page adjustable height + 3/64 / 5/64 / 1/8 Tested according to EN1527:2013 ¾" ø " 9 16" 1 ¾" 15 16" 15 16" " " " 5 16" 100" 4" 3 16" " ¼" 3 8" " 13 16" " R " R " 4 " 4 " " " " " " " " " " 4" ø " 9 16" 3 16" 1 ¾" " 100" 2 ¼" ¼" " 3 8" 13 16" 9 16" 9 16" R " R " " " 4 " 4 " " "

60 : 60 Set Deeply Move Base bottom roller sets Standard set for glass and wooden doors Complete sets for glass doors t = 5/16-1/2 for wooden doors t = 11/2-13/4 consisting of: 1 guide profile, aluminum stainless steel optic USO82EO 1 stopper set USO82 -S 1 runner profile without drilling holes, satin stainless steel, USO86.2EF, length: see table 1 pair of bottom rolls, satin stainless steel, USO184EF (glass) 1 pair of bottom rolls, satin stainless steel, USO185EF (wood) 1 Allen key (SW 4,0), installation instruction Glass set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Wood set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Maximum door weight 176 lbs (80 kg) Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page ¾ Ø ½ ¾ 5 16 Ø ½ - 1¾

61 Set Full Moon Base bottom roller sets : 61 Standard set for glass and wooden doors Complete sets for glass doors t = 5/16-1/2 for wooden doors t = 11/2-13/4 consisting of: 1 guide profile, aluminum stainless steel optic USO82EO 1 stopper set USO82 -S 1 runner profile without drilling holes, satin stainless steel, USO86.2EF, length: see table 1 pair of bottom rolls, satin stainless steel, USO402EF (glass) 1 pair of bottom rolls, satin stainless steel, USO403EF (wood) 1 Allen key (SW 4,0), installation instruction Glass set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Wood set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 + height Maximum door weight 330 lbs (150 kg) adjustable height, + 1/4 Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page ¼ ½ ¾ ¼ 1 8 1½ - 1¾

62 : 62 Set Q-Box Base bottom roller sets Standard set Q-Box for glass and wooden doors Complete sets for glass doors t = 5/16-1/2 for wooden doors t = 11/2-13/4 consisting of: 1 guide profile, aluminum stainless steel optic USO82EO 1 stopper set USO82-S 1 runner profile without drilling holes, satin stainless steel, USO86.2EF, length: see table 1 pair of bottom rolls, satin stainless steel, USO406EF (glass) 1 pair of bottom rolls, satin stainless steel, USO407EF (wood) 1 Allen key (SW 4,0), installation instruction Glass set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Wood set track rail length passage width Numbers inch inch USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/16 Maximum door weight 330 lbs (150 kg) adjustable height, + 1/4 Please find planning guides and installation instructions at + For special length rails, other individual components and accessories refer to page height 1 1 ¾ ½ R ¼ / / ¾ ¾ R ¼

63 Silent Glam Base bottom rollers : 63 Art. No. Bottom rolls (pair) with two decorative inlays (stainless steel) glass protection set, 1 Allen key (SW 4,0), USO400EF for glass doors t = 5/16-1/2 USO401EF for wooden doors t = 11/2-13/4 adjustable height, + 1/4 maximum door weight 330 lbs (150 kg) tested according to EN1527 : 2013 satin stainless steel (AISI 303) USO Additional kit for wood doors wood t = 1 5/16-1 9/16 Base version Center inlay - satin stainless steel, USO280EF Outer inlay - white glass, USO281G003 Center inlay - black glass, USO280G004 Outer inlay - black glass, USO281G004 Center inlay - satin stainless steel, USO280EF + height tested Outer inlay - black glass, USO281G004 Center inlay - white glass, USO280G003 t 1" 1" ¾ " ¾ " " " R 1 ¾ " R 1 ¾ " " ø " T 4 " 4 " 2 1 6" " 1½" " " " " " " " " 9 16" 9 16" ø " 1" R 1 ¾" R 1 ¾" 1" 4 " 4" " "

64 : 64 Full Moon Base bottom rollers Art. No. Pair of bottom rolls glass protection set 1 Allen key (SW 4,0), USO402EF for glass door t = 5/16-1/2 USO403EF for wooden door t = 11/2-13/4 adjustable height, + 1/4 maximum door weight 330 lbs (150 kg) satin stainless steel (AISI 303) + height ½ ½ - 1 ¾ Belans Art. No. Pair of bottom rolls glass protection set 1 Allen kay (SW2,5), Z927 ø 85 ø 3 3 8" + height tested "- ½" USO404EF for glass door t = 5/16-1/2 USO405EF for wooden door t = 11/2-13/4 USO Additional kit for wood doors wood t = 1 5/16-1 9/16 adjustable height in steps: + 3/64 / 5/64 / 1/8 maximum door weight 330 lbs (150 kg) tested according to EN1527:2013 satin stainless steel (AISI 303) 15 16" 15 16" " " 59, " "-1¼" " R " R " 4 " 4 " " ø 85 ø 3 3 8" ½"-1¾" 59, " " " " R " " " " R " 4 " 4 " " " " " 9 16" 9 16"

65 Q-Box Base bottom rollers : 65 Art. No. Pair of bottom rolls glass protection set 1 Allen key (SW 4,0), USO406EF for glass door t = 5/16-1/2 USO407EF for wooden door t = 11/2-13/4 adjustable height, + 1/4 maximum door weight 330 lbs (150 kg) satin stainless steel (AISI 303) + height ½ ½ - 1 ¾ Deeply Move Art. No. Pair of bottom rolls glass protection set 1 Allen key (SW 4,0), USO184EF for glass door t = 5/16-1/2 USO185EF for wooden door t = 11/2-13/4 maximum door weight 176 lbs (80 kg) satin stainless steel (AISI 303) ½ - 1 ¾

66 : 66 Track rails Aluminum - stainless steel optic 13/4 /1 Base bottom rollers 5 7 8" " 28 ½" 28 ½" " 5 7 8" " 5 7 8" " " " " " 5 7 8" " 5 7 8" " " " " " 5 7 8" 92 ½" 5 7 8" " " " " " 5 7 8" " Drilling distance Rail Econoline 13/4 / 1, aluminum - stainless steel optic, for ceiling or wall mount (wall angles required) for single doors: Art. No. profile length passage width USO EO 74 3/ /2-35 7/16 USO EO 82 11/ / /8 USO EO 92 1/2 39 3/4-44 1/16 USO EO 102 3/8 44 1/2-49 3/16 For two door panels, two pieces with coupling: Art. No. profile length passage width USO EO 147 7/ /8 Rail Econoline 13/4 / 1, custom-made: Please note distance B 5 7 8" " " 5 7 8" B B B B max /4 3 16"

67 Ceiling rails Aluminum - stainless steel optic 2 23/64 / 2 19/32, two parts Base bottom roller sets : " " " " " " " " " " " " " " " " " " " " " " " " " " Drilling distance Rail Comfortline 2 23/64 / 2 19/32, aluminum - stainless steel optic, for ceiling or wall mount and for subsequent installation of suspended ceilings. for single doors: Art. No. ceiling fixture Art. No. wall fixture profile length passage width USO EO USO EO 74 3/ /2-35 7/16 USO EO USO EO 82 11/ / /8 USO EO USO EO 92 1/2 39 3/4-44 1/16 USO EO USO EO 102 3/8 44 1/2-49 3/16 For two door panels, two pieces with coupling: Art. No. profile length passage width USO EO 147 7/ /8 Rail Comfortline 2 23/64 / 2 19/32, custom-made: Please note distance B " " B B B B max /4 3 16"

68 : 68 End caps for rail Base bottom roller sets ¾ Art. No. USO412-EK Pair of end caps for rail Econoline 13/4 /1 for clipping, plastic Art. No. USO84-EK1 Pair of End caps for rail Econoline 2 3/8 /2 19/32 for clipping, plastic Door stopper with connecting set Art. No. Door stopper with connection set for rail Econoline 13/4 /1 (pair) USU365-S set for glass door t = 5/16-1/2 USU366-S set for wooden door t = 11/2-13/4 aluminum / rubber buffer ¾ 1 Art. No. Door stopper (pair) with connection set for rail Comfortline 23/8 /219/32 USO413-S set for glass door t = 5/16-1/2 USO414-S set for wooden door t = 11/2-13/4 aluminum / rubber buffer Wall mount ¾ 1 Art. No. Mounting bracket for wall fixture for mounting the ceiling track rail at the wall USO282-25EO for glass doors AL = 1 USO282-35EO for glass doors AL = 1 3/8 USO282-45EO for wooden doors, AL = 1 3/4 aluminum, stainless steel optic ¼

69 Soft-Close mechanism Base bottom roller sets : 69 Soft-Close mechanism catches the door panel as it is being closed and pulls it to a defined stopping point. This prevents the door from slamming into stoppers and bouncing back or jumping off the track. Please note the various Soft-Close mechanisms which are defined by the weight of the door. Art. No. Soft-Close mechanism (pair) including activator for track rail Comfortline 2 23/64 / 2 19/32 plastic housing 13 3/4 17 / / USO415-K USO416-K Soft-Close mechanism (left/right) for glass door t = 5/16-1/2 maximum door weight 176 lbs (80 kg) L = 13 3/4 maximum door weight 176 lbs to 264 lbs (80 to 120 kg) L = 17 11/16 1 USO417-K USO418-K Soft-Close mechanism (left/right) for wooden door t = 11/2-13/4 L = 13 3/4 maximum door weight 176 lbs (80 kg) maximum door weight 264 lbs (120 kg) L = 17 11/16 Brush seal Art. No. Brush sealing for track rail Comfortline 2 23/64 / 2 19/32 profile length USO K L: 74 3/16 seal (pair) for glass door t = 5/16-25/64 USO K L: 82 11/16 seal (pair) for glass door t = 5/16-25/64 USO K L: 92 1/2 seal (pair) for glass door t = 5/16-25/64 USO K L: 102 3/8 seal (pair) for glass door t = 5/16-25/64 USO K L: 74 3/16 seal (pair) for glass door t = 7/16-33/64 USO K L: 82 11/16 seal (pair) for glass door t = 7/16-33/64 USO K L: 92 1/2 seal (pair) for glass door t = 7/16-33/64 USO K L: 102 3/8 seal (pair) for glass door t = 7/16-33/64 USO K L: 74 3/16 seal (pair) for wooden door USO K L: 82 11/16 seal (pair) for wooden door USO K L: 92 1/2 seal (pair) for wooden door USO K L: 102 3/8 seal (pair) for wooden door

70 : 70 Bottom track rail Base bottom roller sets Bottom track rail 25/32 x 1/4, without drill holes, for gluing on the floor, satin stainless steel (AISI 304) For single door panel: Art. No. track rail length passage width USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/ " " 92 ½" " " For two door panels, with coupling Art. No. track rail length passage width USO EO 147 7/ /8 > " " " Custom made: Please note the length of the bottom rail " max " Bottom track rail 25/32 x 1/4, with drill holes for countersunk head screw, satin stainless steel (AISI 304) For single door panel: Art. No. track rail length passage width USO EF 74 3/ /2-35 7/16 USO EF 82 11/ / /8 USO EF 92 1/2 39 3/4-44 1/16 USO EF 102 3/8 44 1/2-49 3/ " " " " " " " " " " " " " " " " " " " 92 ½" " " " " " " " " " " " " " " " For two door panels, with coupling USO EO 147 7/ /8 > " " " Costom made: Please note the length of the rail and distance between the drillholes " max "

71 AS 50 Sliding sets aluminum : 71

72 : 72 AS 50 for glass doors Sliding sets aluminum Complete sets, prepared for wall mount for TSG-glass panel thickness t = 5/16, consisting of: 1 track rail (wall mount) 2 trolley rollers, clamping shoes, door stoppers, end caps, bottom guide, installation material (screws) Set numbers glass rail length passage width inch inch / /2-35 7/ / / / /2 39 3/4-44 1/ /8 44 1/2-49 3/16 No glass drilling tightening value of clamping shoes: 3 Nm Initial friction < 10 Nm maximum door weight 110 lbs (50 kg) drilling distance refer to page 76 additional components (soft close, trimming distances, etc.) refer to page ½ 5 16 ¼

73 AS 50 for wooden doors Sliding sets aluminum : 73 Complete sets, prepared for wall mount for wood panel thickness t = 11/2-13/4, consisting of: 1 track rail (wall mount), two-part 2 trolley rollers, supportplates, door stopper, end caps, bottom guide, USH268K Set numbers Wood rail length passage width inch inch / /2-35 7/ / / / /2 39 3/4-44 1/ /8 44 1/2-49 3/16 Support plate for top hung for wood panel Initial friction < 10 Nm Maximum door weight 110 lbs (50 kg Drilling distance refer to page 76. additional components (Soft Close, trimming distances, etc.) refer to page ¼ 5 16

74 : 74 Sliding sets aluminum Profile track rail for AS 50 Profile track rail for ceiling and wall mount Aluminum, anodized Artikel No: length passage width /8 29 1/2-35 7/ / / / /2 39 3/4-44 1/ /8 44 1/2-49 3/ " " 16 ¼" 16 ¼" 16 ¼" 16 ¼" " " " " Components for AS Art. No. End cap for track rail AS 50 (pair) to clip on, plastic Art. No.: Soft-Close mechanism (pair) Set including connector unit with activator designated for profile AS50 maximum door weight : 110 lbs (< 50 kg) Soft-Close mechanism (pair) for glass Soft-Close mechanism (pair) for wood

75 Components for AS 50 Sliding sets aluminum : 75 Art. No.: Clamping shoes (pair) for TSG glass panel t = 5/16 loading capacity up to 110 lbs (50 kg) attraction force 3 Nm zinc die-cast Art. Nr.: Trimming distances for door frames Aluminum spacers compensate a distance of 25/32 in case of door frames Art. No.: Support plate (pair) for wooden door panels t = 11/2-13/4 top fixture, Aluminum Art. No.: Door stopper (pair) for profile AS50, plastic ½ Art. No.: Trolley roller (pair) for clamping shoes or support plate for use with profile AS50 loading capacity up to 110 lbs (50 kg) plastic Art. No.: Bottom guides Aluminum anodized with felt insert for TSG door panels t = 5/ USH268K for door panel thickness t up to 13/4, plastic panel channel for bottom guides 5/16 x 11/16 1 3/16" 13/16" 2 1/2" 3/16" Ø 3/16" 1 1/8" 1/4"

76 : 76 Door locks Bottom door lock Art.Nr. Bottom door lock turn knob, singlepoint lock with strike plate measure: 2 9/16 x 2 3/16 for glass door panels t = 5/16-1/ satin stainless steel polished stainless steel 3 8 -½ ½ R Latch Art. No. Latch for one side door panel blocking for wood doors material: steel, brushed nickel plated Pull handles DH Impero - EconoLine For glass doors t = 5/16-1/2, handle bar tube ø 1 Art. No. L c/c D Ø BM L /16 7 7/8 56/ / /16 56/ / /32 56/ /8 15 3/4 56/ /2 23 5/8 56/64 D material: satin stainless steel (AISI 304) supports D = stainless steel, solid passage height DH = 1 49/64 includes fastener set welded endcaps DH = passage height I c /c = drilling distance

77 Pull handles Technical Data For more information please ask for our special Pull handle brochure or look on : 77 L c/c ø 13/16 DH Beluga handle bar ø 13/16, solid, welded Glass doors Art. No. Art. No. ø L c/c Single handle in pairs SG300-20EF-SG SG300-20EF-PG 13/ / /64 SG400-20EF-SG SG400-20EF-PG 13/ / /16 SG500-20EF-SG SG500-20EF-PG 13/ / /8 SG600-20EF-SG SG600-20EF-PG 13/ / /16 SG900-20EF-SG SG900-20EF-PG 13/ / /8 SG EF-SG SG EF-PG 13/ /4 46 7/16 Wood doors Art. No. Art. No. ø L c/c Single handle in pairs SG300-20EF-SW SG300-20EF-PW 13/ / /64 SG400-20EF-SW SG400-20EF-PW 13/ / /16 SG500-20EF-SW SG500-20EF-PW 13/ / /8 SG600-20EF-SW SG600-20EF-PW 13/ / /16 SG900-20EF-SW SG900-20EF-PW 13/ / /8 SG EF-SW SG EF-PW 13/ /4 46 7/16 passage height DH = 1 49/64 tubular thickness t = 5/64 mm, satin stainless steel (AISI 304) Impero ø 1 For Glass doors Art. No. Art. No. L c/c Single handle Handle set L B M ø SI300-25EF-SG SI300-25EF-PG 11 13/16 8 1/4 SI400-25EF-SG SI400-25EF-PG 15 3/ /16 SI500-25EF-SG SI500-25EF-PG 19 11/ /4 SI600-25EF-SG SI600-25EF-PG 23 5/8 15 3/4 SI900-25EF-SG SI900-25EF-PG 35 7/ /16 SI EF-SG SI EF-PG 47 1/4 35 7/16 D DH For Wood doors Art. No. Art. No. L c/c Single handle Handle set SI300-25EF-SW SI300-25EF-PW 11 13/16 8 1/4 SI400-25EF-SW SI400-25EF-PW 15 3/ /16 SI500-25EF-SW SI500-25EF-PW 19 11/ /4 SI600-25EF-SW SI600-25EF-PW 23 5/8 15 3/4 SI900-25EF-SW SI900-25EF-PW 35 7/ /16 SI EF-SW SI EF-PW 47 1/4 35 7/16 passage height DH = 1 3/4 material thickness t = 5/64, satin stainless steel (AISI 304), distance D: ø 7/8, satin stainless steel (AISI 303), solid Glass drill holes ø 9/16, Wood drill holes ø 1/2 Thalis handle bar ø 13/16 L c/c ø 1 Glass doors Art. No. Art. No. ø L c/c Single handle in pairs SN325-25EF-SG SN325-25EF-B-PG 13/ / /16 SN625-25EF-SG SN625-25EF-B-PG 13/ /8 23 5/8 Wood doors Art. No. Art. No. ø L c/c Single handle in pairs SN325-25EF-SW SN325-25EF-B-PW 13/ / /16 SN625-25EF-SW SN625-25EF-B-PW 13/ /8 23 5/8 DH passage height DH = 1 49/64 tubular thickness t = 5/64 mm, satin stainless steel (AISI 304) Unique design style based on small bend radius. DH = passage height I c /c = drilling distance

78 : 78 Technical Data Pull handles [/] 1 Level handle bar [/] 5/6 / 1 3/16, solid Art. No. Art. No. handle bar [/]1 L c/c Single handle in pairs L c/c /6 / 1 3/ / / /6 / 1 3/ / / /6 / 1 3/ / / /6 / 1 3/ /4 35 7/16 [/] 2 DH [/] 1 passage height DH = 1 3/4 supports [/]2 = 56/64 x 56/64, satin stainless steel (AISI 303), solid handle bar: satin stainless steel (AISI 304), tube c/c DH L Beetle / leather satin stainless steel, solid, leather classic Nappa, handle bar ø 19/32 Art. No. Art. No. L c/c color Single handle in pairs / /64 white / /64 black / /64 brown / /64 cognac / /64 shale grey / /64 lemon / /64 orange passage height DH = 1 27/32 supports ø = 13/16 roses d = 1 9/16 satin stainless steel (AISI 303) Impero / leather, ø 1 3/16 Leather: black, plain For Glass doors Art. No. Art. No. L c/c Single handle Handle set SI545-30EP-L042-SG SI545-30EP-L042-PG 21 7/ /4 L c/c ø For Wood doors Art. No. Art. No. L c/c Single handle Handle set DH SI545-30EP-L042-SW SI545-30EP-L042-PW 21 7/ /4 D passage height DH = 1 3/4 mounting set for glass or wood doors, handle bar: ø 1 3/16, Center of handle bar: black plain leather with 2 stainless steel ends polished stainless steel (AISI 303) bases D = ø 1, polished stainless steel (AISI 303) Glass drill holes ø 19/32, Wood drill holes ø 1/2

79 Locking Pull System Technical Data : 79 In certain environments, such as retail spaces or open office areas, it is necessary to be able to lock the doors. You do not need to sacrifice quality for functionality. We offer many sizes and functions so that you can find the product that meets your functional and design requirements. Turning Knob Inside/ Emergency Release Outside Turning Knob Inside / key operated lock outside Door Pull Pair Half Height - turn knob inside; emergency release outside door thickness ø1" Glass door types: 5/6-19/32 : ø1½" 8" Art. No. L BM D SIB1422DN-25EF-B 4 1 7/ / " Door types wood or hollow metal: 38-45mm: Art. No. L BM D 42" SIH1422DN-25EF-B 4 1 7/ /16 1 Dead Bolt down Strike not included Material: Satin stainless steel (AISI 303/304) ø7/8" 6" 2" 1/4" For more information please ask for our special Pull handle brochure or look on Strike Dust proof Strike Art..Nr. D: d: T: SIB-0004EF 1 3/4 56/64 1 1/4 Material: Satin stainless steel/alu Art..Nr. D: d: T: SIB-0005EF 1 3/ /64 Material: Satin stainless steel/alu

80 : 80 Locking Pull System Technical Data Door Pull Pair Half Height - turn knob inside, cylinder lock outside Door Pull Pair Full Height - turn knob inside; profilcylinder lock outside ø13 8" door thickness door thickness 13 8" 1/4" 6" 8" ø2" 82" 56" ø2" 42" 42" ø11 8" 6" ø11 8" 6" 2½" 1/4" 2½" 1/4" Glass door types: 5/16-19/32 : fixed Length, BM = /16 x 3 3 3/8 : Art. No. L D SIB2082DS-35EF-B /64 1 3/8 Glass door types: 5/16-19/32 : Art. No. L BM D SIB1422DS-35EF-B 4 1 7/ /16 1 3/8 Door types wood or hollow metal: 11/2-149/64 : Art. No. L BM D SIH1422DS-35EF-B 4 1 7/ /16 1 3/8 dead Bolt down incl. SFIC-cylinder lock delivery without strike Material: Satin stainless steel (AISI 303/304) custom length: Art. No. L BM D SIA-XXDS-35EF-B on demand on demand 1 3/8 door types wood or hollow metal: 11/2-149/64 : BM = /16 x 3 3 3/8 Art. No. L D SIH-2082DS-35EF-B /8 Fixed Length: custom length: Art. No. L BM D SIH-XXDS-35EF-B on demand on demand 1 3/8 Dead bolt up and down incl. SFIC-cylinder lock delivery without strike Material: Satin stainless steel (AISI 303/304) Please submit the technical drawing including customer length.

81 Flush Pulls For more information please ask for our special Pull handle brochure or look on d T H Technical Data Flush Pull Rondo Drill hole depth T = 5/32, wide border : 81 Art. No. ø d D T H GM70-4EF 2 3/4 ø 1 3/4 ø 2 5/32 1/4 GM90-4EF 335/64 ø 2 9/16 ø 2 3/4 5/32 1/4 GM125-4EF 459/64 ø 4 ø 411/64 5/32 1/4 D ø Drill hole depth T = 36/64, wide border Art. No. ø d D T H GM70-14EF 2 3/4 ø 1 3/4 ø 2 36/64 40/64 GM90-14EF 335/64 ø 2 9/16 ø2 3/4 36/64 40/64 GM125-14EF 459/64 ø 4 ø 411/64 36/64 40/64 Flush pull for glass and wooden doors, wide border Satin stainless steel (AISI 303) Turned from solid stainless steel d D 9/64 3/8 Flush Pull Diskus Drill hole depth T = 9/64, wide border Art. No. ø d D T H ø GO60-4EF 2 3/8 1 5/8 1 15/16 9/64 3/8 GO70-4EF 2 3/4 ø 121/32 ø 159/64 9/64 3/8 GO90-4EF 335/64 ø 2 7/16 ø 223/32 9/64 3/8 GO90-4DB 335/64 ø 2 7/16 ø 223/32 9/64 3/8 for glass doors, drill hole depth T = 3,5 mm satin stainless steel (AISI 303) Turned from solid stainless steel Flush Pull Diskus Aluminum Drill hole depth T = 9/64 Art. No. ø d D T H GO50-4AE 2 ø 1 21/32 ø 159/64 9/64 3/8 for glass and wooden doors aluminum natural anodized Flush Pull Kambium for wooden doors ø 2 3/8 Drill hole depth T = 36/64 9/16 5/8 Art. No. ø d D T H ø 2 11/16 GN50-14EF 2 ø 127/64 ø 121/32 36/64 19/32 GN75-14EF 261/64 ø213/32 ø 241/64 36/64 19/32 GN75-14DB 261/64 ø213/32 ø 241/64 36/64 19/32 Push-in pull (ø 222/32 ) Satin stainless steel (AISI 303) ø 2 15/16 Turned from solid stainless steel

82 : 82 Technical Data Flush Pulls B b t H Flush Pull Drill hole depth t = 33/64 L x B: 5 29/32 x 1 31/32 b: 4 9/64 x 55/64 l L D Art. No. D t H GR150-13EF 4 51/64 x 1 3/16 33/64 19/32 Rectangle Flush pull for wooden doors Satin stainless steel (AISI 303/304) B b t Flush Pull Barno, for adhession Aluminum (EV1) anodized Art. No. L B b / /64 1 3/16 x 2 3/ /8 2 23/64 1 3/16 x 6 19/64 b L Flush Pull Barno, for adhession Stainless steel optic Art. No. L B Innen / /64 1 3/16 x 2 3/ /8 2 23/64 1 3/16 x 6 19/64 Incl. special adhesive tape (peel + stick). Clean and degrease the door panel before adhesion. Bevore using the handle wait 24 hours. t = 23/64 Flush Pull Oxa for adhession Aluminum (EV1) anodized L = 2 23/64 B t Art. No. B b B /64 /2 23/64 1 3/8 /1 3/8 b Incl. special adhesive tape (peel + stick). Clean and degrease the door panel before adhesion. Bevore using the handle wait 24 hours. t = 23/64 D d t Flush Pull Oxi for adhession Aluminum (EV1) anodized Art. No. D d / /64 Incl. special adhesive tape (peel + stick). Clean and degrease the door panel before adhesion. Bevore using the handle wait 24 hours. t = 23/64

83 GTC General Terms and Conditions ABP-Beyerle GmbH Version: September Scope of application These general terms and conditions apply to all our offers, quotations and contracts on supplies, deliveries and services even if they are not explicitly referenced later during business relations. The following conditions only apply to consumers insofar as consumer protection regulations are not contradictory. In such cases, the legal regulations apply to consumers. Deviating agreements or the ordering party s own terms and conditions are only binding for us after our explicit confirmation in writing. The reservation of ownership in Clause 10 cannot be limited in any cases. 2. Prices 2.1. The basis is the current price list. The prices apply per meter or piece plus the added value tax applicable on the day of delivery. Deliveries are made in packing Dimension only The agreed remuneration must always be paid. If the price at the time of the rendering of the service or performance increases due to a change in the market price or through an increase by the third parties involved in the service or performance, the increased price applies. If that is 20 % or more above the agreed price, the customer has the right to withdraw from the contract. This right must be asserted promptly after the increased price has been communicated. Additional claims are excluded Freight and packing costs will be additionally charged to all customers. The delivery is freight collect at the cost of the recipient. Orders that are not bound to deadlines will be shipped as inexpensively as possible. 3. Small order surcharge For reasons of economic viability, orders up to net goods value can only be executed against a processing fee of lump sum net. 4. Dimensions and weights Dimension and weight specifications are made subject to slight technically related non-compliances. 5. Offers/quotations/orders Order acceptance is accepted exclusively through our written order confirmation. Oral agreements are non-binding. We are bound to our offer for two weeks from date of receipt. For call orders, if no other agreement has been made an acceptance deadline of twelve months from the date of the order confirmation applies. If there is no acceptance by then, we are entitled to demand the outlays of the sales price from the customer and to organize the deliveries based on our diskretion. The alternative according to 326 BGB, to withdraw from the contract or to demand indemnification due to failure to perform remains unaffected. 6. Delivery deadlines, partial performance, delivery quantities for special parts Delivery dates and delivery deadlines apply according to the order confirmations. They are considered maintained if the goods depart from our factory on the agreed day or the day of the deadline expiration. The delivery deadline starts with the date on the order confirmation. If a collaborative obligation by the customer is necessary, the deadline does not start before the customer has met this obligation. We are also entitled to partial deliveries to a reasonable degree. Indemnification for delivery delays for which we are not responsible is excluded. That especially applies to unpredictable stoppages, malfunctions in the conveyance ways, a lack of manufacturing material and energy, strikes and/or lockouts. If the delivery dates or deadlines exceed more than two weeks for these reasons, both parties are entitled to withdraw from the contract with a written declaration. Apart from that, liability is limited to criminal intent and gross negligence. The disklaimer of liability only applies to minor negligence for private consumers. If assertion of the customer rights requires setting a reasonable grace period, it is to be fixed as at least two weeks. Non-compliances in the number of pieces and weight of up to 10% of the order amount are permitted for customerspecific parts. 7. Risk of conveyance All deliveries are made at the customer s risk as soon as the goods are handed over to the carrier, the haulage contractor or any other person or establishment for implementing delivery. That also applies if the goods are shipped in our company-own vehicles. Transporting the goods within our company location is also considered a destination purchase at the above-mentioned terms. 8. Notification of defects, warranty, breach of duty, statute of limitations 8.1 Warranty Obvious defects must be reported within eight days after receipt of the goods. The deadline is six months from the receipt of the goods for latent defects. In both cases, notification of the defect is to be in writing. The faultiness of one part does not entitle to objection to the entire delivery. Defective goods will be replaced upon return or repaired if, especially from the customer s point of view that is acceptable in terms of time. The customer is entitled to reduce the remuneration or to demand cancellation of the contract only after two failed attempts at repair or in if a replacement delivery is impossible Breach of duty Our liability for contractual breaches of duty and from offences is limited to intent and gross negligence as well as to the replacement of typical damages. That does not apply to the customer s life, body or health, to demands due to breach of cardinal obligations and compensation for damage caused by delay ( 286 BGB (German Civil Code)). We are liable for any degree of blame in this sense. If this involves damage that does not result from harm to the customer s life, body or health, however, we are only liable for typical damages. : Statute of limitations The warranty is one year starting with the hand-over of the goods or with manufacture in the factory. Compensatory claims by the customer due to a defect expire one year after handing over the goods or manufacture in the factory. That does not apply if we have acted culpably or in cases of injury to life, body or health. Insofar as a liability for damages that is not based on the injury of the life, body or health of the customer is not excluded for minor negligence, such claims expire within one year, starting with the origination of the claim. 9. Payment conditions The invoice amounts are due immediately after the invoice is written and are to be paid latest 30 days after delivery. After the above-mentioned deadline has passed, the customer is in default of payment. A cash diskount of 2% is granted for payments made within ten days of the invoice date. The latter does not apply to payments made by promissory notes or checks. In cases of default, without requiring evidence, interest of 8 percentage points over the base interest rate applicable at that time is due from companies and 5 percentage points from consumers. Lump sum costs of 2.50 each will be charged for every reminder. If the payment conditions are not complied with, especially after agreed payment installments, all demands immediately become due. The same applies to check and promissory note protests, applications for insolvency proceedings and all other circumstances that are suggestive of a decline in the customer s assets. The above interest regulation applies from the time of default. Checks and promissory notes are accepted only on account of performance; promissory notes only after prior agreement and without any guarantee for correct submission and protest. Discount and note charges are charged to the customer and are due immediately. 10. Retention of title In contacts with consumers, we reserve the title to the goods until complete payment of the sales price has been made If the customer is a company, we reserve the title to the goods until all demands against the ordering party from the business relation have been satisfied even if the concrete goods have already been paid If the customer is a company, it - in the case of resale/refinement of the reserved goods - already now cedes to us as security all demands and other claims against its customers, which arise through the named transactions including ancillary cost, until fulfillment of all our demands. In case of refinement, its alteration or its connection with other objects, we immediately acquire ownership of the manufactured object, namely in the proportion of the title-reserved goods at the value of the new object at the time of processing or refinement. Upon demand, the customer is obligated to name third party debtors and to notify about the conveyance The right of the customer to sell or process the goods in normal business dealings expires with cessation of payments, application for or opening of bankruptcy proceedings as well as an insolvency plan proceeding Upon access of third parties, especially attachment of the reserved goods, the customer is to immediately inform and transfer the documents needed for an intervention; that also applies to impairments of other kinds. Independent of that, the customer is to notify the third party in advance about the extant rights on the goods. If the customer is a company, it bears all costs for replacement of the goods as well as an intervention if the third party is not in a position to reimburse these If our demand of the value of security surpasses our claims against the customer by more than 20 %, upon its demand and based on our choice we can release the securities we are entitled to the corresponding scope. 11. Samples and drawings, patents The supplier retains the property rights and copyrights to images, drawings, sketches and other documents and samples. The documents are to be returned immediately upon request and must not be passed on to their parties without the supplier s consent. Sample items are to be returned within two months; otherwise the supplier is entitled to invoice them. Special versions of sample items will only be delivered against invoice. 12. Product liability If the delivered goods were not manufactured by the seller itself, all demands involving the product liability are passed on to the manufacturer. We would be glad to broker between both parties in such cases. 13. Data privacy The customer consents to our processing of his/her/its private information as required by the contract relationship. 14. Place of fulfillment, legal venue If the buyer is a qualified merchant, legal public entity or special fund under public law, it is agreed that the place of fulfillment and legal venue for all disputes between the parties resulting from the contract relationship is the headquarters of ABP-Beyerle GmbH. 15. Legal validity If a stipulation in these terms and conditions or a clause in the frame of other agreements are or become ineffective, the validity of the rest of the clauses or agreements is not affected. Instead of the ineffective clauses or agreements, suitable regulations are considered agreed to that come closest to the purpose of the contract. The same applies if gaps needing to be complemented become apparent. 16. Choice of law The laws of the Federal Republic of Germany apply to the legal relations between our customers and us. They do not apply if specific consumer regulations in the country of nationality (permanent residence) of the customer are more favorable (Art. 29 EGBGB (Introductory Act to the Civil Code)). The use of the United Nations Convention on Contracts is excluded.

84 Beyerle US L.L.C S Royal Atlanta Dr. Tucker, GA 30084, USA Phone: + 1 (770) Fax: + 1 (770) info@beyerle-us.com Sliding Door Fittings : 8.1 : Beyerle US