SC Normal Duty... SCH Expansion and Non--Expansion... SCM Medium Duty...
|
|
- Sara Griffith
- 5 years ago
- Views:
Transcription
1 CONTENTS Set Screw Ball Bearings eatures/benefits... B-- How To Order/Nomenclature... B--4 Selection... B--5 Selection/imensions - Pillow Block SC-- Normal uty... SCAH Air Handling Normal uty... B--0 B--4 SCB Normal uty... B--6 SCBH Air Handling Normal uty... B--0 SCEZ Normal uty Coated... B--4 SCH Expansion and Non--Expansion... B--6 SCM -- Medium uty... SCMAH Air Handing Medium uty... B--8 B--30 VSC Intermediate uty... B--3 VSCB Intermediate uty Pillow Blocks... B--34 SL Light uty... B--38 SC Normal uty Tapped... CC Ball Bearing an and Blower Pillow Blocks... B--39 B--36 langes --Bolt lange Bolt lange Bolt lange... Piloted lange... Take--Ups SC -- Normal uty Narrow Slot... SCM -- Medium uty Narrow Slot... VSC -- Intermediate uty Narrow Slot... SC -- Normal uty Wide Slot... VSC -- Intermediate Wide Slot... Type G Normal uty Top Angle... Hanger Bearings SC Normal uty... SC Normal uty Screw Conveyor... SC Normal uty Cylindrical Units... Inserts SC -- Normal uty Inserts... SCH Expansion and Non--Expansion... SCM Medium uty... VSC -- Intermediate uty... CC Ball Bearing an and Blower... Modifications/Accessories... Related Products High Temperature Ball Bearings... End Closures... Index... Keyword Index... B-- B--40 B--55 B--60 B--76 B--80 B--84 B--86 B--96 B--98 B--00 B--04 B--06 B--06 B--08 B-- B--4 B--6 B--8 B--9 B-- B--3 INEX-- INEX--8
2 EATURES/BENEITS or over 70 years, OGE has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearing. A state-of-theart facility was built in Rogersville, Tennessee, to manufacture the new OGE design. The result is the OGE SC/SCM/ VSC/SL line. It is the most current design setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value. Light uty Narrow Inner Ring (SL) Intermediate uty Narrow Inner Ring (VSC) Normal uty Wide Inner Ring (SC) Medium uty Wide Inner Ring (SCM) Wide Variety of Housing Configurations Available in, to 3-, Bore s Seal options: lingers on SC/SCM (flingers are standard on E-Z KLEEN nickel plated and Screw Conveyor Hanger Bearings) Low friction labyrinth on SC/SCM Other options: Corrosion resistant inserts for SC/SCM, E-Z KLEEN and nickel plate. A/USA lubricant and other special lubricants High temperature SC/SCM designed for temperatures from 5 to 400. actory assembledtoorder. or application assistance, contact OGE Engineering. Phone ax Precision Hardened and Honed Inner and Outer Rings for wear resistance, quiet operation and long life. Grade 0 Balls for quieter operation and less vibration. Superior Locking orce The OGE SC/SCM/VSC/SL line uses 65 spacing for setscrews. The unique 65 design offers an optimum balance between locking force and inner ring stress. B--
3 EATURES/BENEITS The OGE PROGUARt t Seal Stronger, More lexible Cage OGE E-Z KLEEN Ball Bearings Available with Polymer or nickel/ chrome plated housings (SC). These features make the SC ball bearing uniquely suited for the food, chemical and processing industries. PROGUAR positive contact, low drag rubber seal OGE SC/SCM/VSC/SL mounted ball bearings use the field proven PROGUAR land-riding contact seal with steel shield protection. This highly effective positive seal design assures uniform lip contact with the inner ring to seal out contaminants and seal in lubricants. Reinforced, stabilized nylon cage The ball cage is made of heat stabilized nylon with 33% fill short fiberglass reinforcement for added strength. The nylon material provides a natural lubricity for longer life. iberglass reinforcement allows higher operating temperatures than plain nylon, yet is more resistant to fatigue than metallic cages. Short fiberglass allows greater flexibility than steel or nomal fiberglass, especially under misalignment. That means longer life in mounted bearings where some degree of misalignment is unavoidably encountered. Anti-Rotation Pin (SC/SCM) An anti-rotation pin prevents rotation of the outer race within the housing. Simple and effective, it makes system inserts easier to replace. There is no need to remove and replace grease fittings, location pins or other devices. On SC/SCM optional flingers can be added to form a tight labyrinth with the PROGUAR seal and provide additional seal protection against contaminants and trash. Simplified Anti-rotation device B--3
4 HOW TO ORER/ HOW TO ORER There are two ways to specify OGE Bearings. Most of the product offering have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate ordering processing. When part numbers are not shown, the product may be specified by description or part name. This method is used when ordering units that include modifications or options. To order by description, use the nomenclature key shown below and add any special instruction to the end of the description for options not covered by the nomenclature. PB -- SCAH -- 04S -- NL Housing Style Bearing Type Modifications/ eatures CYL Cylindrical Unit B Bolt lange BZ Bolt Piloted lange 4B 4 Bolt lange B langed Bracket C langed Cartridge (Piloted lange) &B an & Blower Pillow Block HNG Hanger Bearing INS Insert L Light uty lange, 3Bolt LT Light uty lange, Bolt NSTU Narrow Slot Take-Up PB Pillow Blocks TB Tapped Base Pillow Blocks TP Top Angle WSTU Wide Slot Take-Up CC SC SCH SCAH SCEZ SCM SCMAH SCNP SL VSC Normal uty, Setscrew Locking for an & Blower Bearings Normal uty, Wide Inner Ring, Setscrew Locking Bearings Normal uty, Wide Inner Ring, Setscrew Locking Bearings with high backing height for use in non-expansion and expansion mounted units. Air Handling SC Bearings E-Z KLEEN SC Bearings Medium uty, Wide Inner Ring, Setscrew Locking Bearings Air Handling Medium uty, Wide inner Ring, Setscrew Locking Bearings Nickel Plated SC Bearings Light uty, Narrow Inner Ring, Setscrew Locking Bearings Intermediate uty, Narrow Inner Ring, Setscrew Locking Bearings Inches: 04 Inches and 6ths irst digit: number of inches. Second and third digit: number of sixteenths of an inch. 04 indicates -4/6 or S Indicates the next smaller ring size other than standard. 04S signifies L 06 ring size Indicates the next larger ring size other than standard. 00L signifies ring size. Metric: 50 irst two digits: M of millimeters Signifies metric CR E LL NL Corrosion resistant insert Expansion lingers on both sides of the insert Low torque labyrinth seals No lube or sealed for life EATURE/BENEITS SETSCREWS BALL BEARINGS PAGE B-- SELECTION ECCENTRIC COLLAR BALL BEARINGS PAGE B3--5 SELECTION -LOK BALL BEARINGS PAGE B4--5 PAGE B--0 B--4
5 SELECTION OGE mounted ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined radial/thrust loads. The maximum recommended load which can be applied is limited by various components in the system, such as bearing, housing, shaft attachments, speed and life requirements. OGE mounted ball bearings have been applied successfully when these limits have been exceeded under controlled operating conditions. Contact OGE Engineering for applications which exceed these recommendations. Select a bearing from the Selection Chart that has a radial load rating at the operating speed equal to or greater than the calculated Equivalent Radial load for a desired L 0 life. This simple method is all that is required for the majority of general applications and provides for occasional average shock loads. L 0 Hours Life is the life which may be expected for at least 90% of a given group of bearings operating under identical conditions. or an L 0 hours life other than those listed in the Selection Chart, multiply the equivalent Radial load by one of the following factors. or 50,000 L 0 hours life, use a factor of.8 and for 80,000, use.39. Then select a bearing from the bold face (30,000) L 0 ratings only in the Selection Chart that has a rating equal to or greater than this value. Heavy Service or heavy shock loads, frequent shock loads or severe vibrations, add up to 50% (according to severity of conditions) to the Equivalent Radial Load to obtain a Modified Equivalent Radial Load. Consult Application Engineering for additional selection assistance. A thrust load value of C/0 is recommended as a guide for general applications and will give adequate L 0 life. Where substantial radial load pulls the housing away from the mounting base, both the holddown bolts and housing must be of adequate strength. Auxiliary load carrying devices, such as sheer bars, are advisable for side or endloading of pillow blocks and radial loads for flange units. To determine the L 0 hours life for loads and RPM s not listed use the following equation: L 0 = C P 3 x 6667 RPM Where: L 0 = Life, hours C = ynamic Capacity, lbs. or N P = Equivalent Radial Load, lbs. or N When the load on a ball bearing is solely a radial load with no thrust (axial) load, the Equivalent Radial Load (P) is equal to the actual radial load. However, when a thrust (axial) load is applied, the radial and thrust loads applied must be converted into an Equivalent Radial Load. The use of the X (radial factor) and Y (thrust factor) from Table convert the actual applied thrust and radial loads to an Equivalent Radial Load which has the same effect on the life of a bearing as a radial load of this magnitude. P=(Xx R )+(Yx A ) Where: P = Equivalent Radial Load, lbs. R = Radial load, lbs. A = Thrust load, lbs. e = Thrust load to radial load factor (Table ) X = Radial load factor (Table ) Y = Thrust actor (Table ) C O = Basic static capacity To find X and Y, first calculate A /C O to determine e. Calculate A / R and compare to e to determine the X and Y factors to use from Table. Substitute all known values into the Equivalent Radial Load equation. The Equivalent Radial loads (P) thus determined can be used in the L 0 life formula or compared to the allowable Equivalent Radial Load rating desired in the expanded rating chart to select a bearing (Table ). If calculated value of P is less than R,useP= R. Table A C o e If A/ R is equal to or less than e Radial/Thrust actors If A / R is greater than e A / R e A / R >e X Y X Y Lubrication OGE Ball Bearings are lubricated at the factory and are ready to run. The bearings are initially lubricated with Shell Alvania # and should be relubricated with the same or some equivalent. or high speeds, high loads, extreme temperatures and other abnormal operating conditions, special greases may be required. Contact OGE Application Engineering for recommendations on these types of applications. Misalignment OGE Ball Bearings are designed to allow a maximum of ± static misalignment. These bearings are not suitable for dynamic misalignment. To ensure good alignment, mounting surfaces must be checked for flatness and must lie in the same plane. When tightening base bolts, each bolt should be alternately tightened in incremental torque values until full torque is achieved to prevent the angular shifting of the pillow block that occurs when one bolt is tightened to its full torque. Shimming may be required to minimize misalignment. Tolerances Normal Commercial Recommended Tolerances Inches Tolerances Inches Set Screw Ball Bearings Inches Up to Over - to Over - to MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--5
6 SELECTION - Inch TABLE --EASY SELECTION TABLE OR BALL BEARING MOUNTE UNITS RING SHAT SIZE YMANIC STATIC L0 LIE ALLOWABLE EQUIVALENT RAIAL LOA RATING (LBS.) AT VARIOUS RPM* SIZE SC, VSC,SL, CC SCM CAPACITY C, Lbs. CAPACITY Co, Lbs. HOURS / / /6/ /8/ / / /6-3/ / / /6 - -** /6 / /6 -/ /6-5/65/ / /4-3/ /6 -/ / / /6 -/ / / * Slight interference fit required when operating on the right of the heavy line or in the shaded area. ** Piloted flange only. EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION ECCENTRIC COLLAR BALL BEARINGS PAGE B3-- SELECTION -LOK BALL BEARINGS PAGE B4--5 B--6
7 SELECTION - Inch TABLE (continued) -- EASY SELECTION TABLE OR BALL BEARING MOUNTE UNITS RING SHAT SIZE YMANIC STATIC L0 LIE ALLOWABLE EQUIVALENT RAIAL LOA RATING (LBS.) AT VARIOUS RPM* SIZE SC, VSC,SL, CC SCM CAPACITY C, Lbs. CAPACITY Co, Lbs. HOURS / / /6/ /8/ / /4-5/6-3/6-3/8 /4-7/6 - -7/6 - -** /6 / /6 -/ /6 -/4-5/65/ /4-3/ /6 -/ / / /6 -/ / / * Slight interference fit required when operating on the right of the heavy line. ** Piloted flange only. PAGE B--0 MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--7
8 SELECTION - Metric TABLE -- EASY SELECTION TABLE OR BALL BEARING MOUNTE UNITS RING SHAT SIZE YMANIC STATIC L0 LIE ALLOWABLE EQUIVALENT RAIAL LOA RATING (N.) AT VARIOUS RPM* SIZE SC, VSC,SL, CC SCM CAPACITY C, N. CAPACITY Co, N. HOURS mm mm mm mm mm mm mm mm 55mm mm 65mm mm 70mm mm mm * Slight interference fit required when operating on the right of the heavy line or in the shaded area. EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION ECCENTRIC COLLAR BALL BEARINGS PAGE B3-- SELECTION -LOK BALL BEARINGS PAGE B4--5 B--8
9 SELECTION - Metric TABLE (continued) EASY SELECTION TABLE OR BALL BEARING MOUNTE UNITS RING SHAT SIZE YMANIC STATIC L0 LIE ALLOWABLE EQUIVALENT RAIAL LOA RATING (N.) AT VARIOUS RPM* SIZE SC, VSC,SL, CC SCM CAPACITY C, N. CAPACITY Co, N. HOURS mm mm mm mm mm mm mm mm 55mm mm 65mm mm 70mm mm mm * Slight interference fit required when operating on the right of the heavy line or in the shaded area. PAGE B--0 MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--9
10 SELECTION/ SC AN SCU NORMAL UTY PILLOW BLOCKS A G BOLT IA H M J L S R MIN B MAX C L HSG C (SCU) (SCU) 07 7mm 7MM 0mm 5/6 5mm -/6 -/8-3/6 -/6 -/8-3/6-5/6-3/8-7/6 3mm Assembled to order Relube No--Lube/Sealed for Life (--NL) With lingers PB-SC-008 PB-SC-00 PB--SC--7M PB-SCU-008 PB-SCU-00 PB--SCU--7M PB-SC-008L PB-SC-00L PB-SC-0 PB--SC--0M PB-SC-04 PB-SC-05 PB-SC-00 PB--SC--5M PB-SC-0 PB-SC-0 PB-SC-03 PB-SC-04S PB--SC--30M PB-SCU-0 PB-SCU-0 PB-SCU-03 PB-SCU-04S PB--SCU--30M PB-SC-04 PB-SC-05 PB-SC-06 PB-SC-07 PB--SC--35M PB--SC NL PB--SC--00--NL PB--SC--7M--NL PB--SCU NL PB--SCU--00--NL PB--SCU--7M--NL PB--SC--008L--NL PB--SC--00L--NL PB--SC--0--NL PB--SC--0M--NL PB--SC--04--NL PB--SC--05--NL PB--SC--00--NL PB--SC--5M--NL PB--SC--0--NL PB--SC--0--NL PB--SC--03--NL PB--SC--04S--NL PB--SC--30M--NL PB--SCU--0--NL PB--SCU--0--NL PB--SCU--03--NL PB--SCU--04S--NL PB--SCU--30M--NL PB--SC--04--NL PB--SC--05--NL PB--SC--06--NL PB--SC--07--NL PB--SC--35M--NL PB--SC PB--SC PB--SC--7M-- PB--SCU--008 PB--SCU PB--SCU--7M-- PB--SC--008L-- PB--SC--00L-- PB--SC--0-- PB--SC--0M-- PB--SC PB--SC PB--SC PB--SC--5M-- PB--SC--0-- PB--SC--0-- PB--SC PB--SC--04S-- PB--SC--30M-- PB--SCU--0-- PB--SCU--0-- PB--SCU PB--SCU--04S-- PB--SCU--30M-- PB--SC PB--SC PB--SC PB--SC PB--SC--35M-- EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5 B--0
11 SELECTION/ SC AN SCU NORMAL UTY PILLOW BLOCKS Weight lbs. A B C kgs.. 5-7/ mm / (SCU) 7MM (SCU) 07 0mm 5/6 5mm -/6 -/8-3/6 -/6 -/8-3/6-5/6-3/8-7/6 3mm / / / / / / / / / / Min. 3-/ / / / / / /6 9. Max. 4-/ / / /6 38. Bolt ia. 3/8 M0 3/8 M0 3/8 M0 3/8 M0 M M M G H J L M R S 03 7mm 7/3.4 5/3.9-5/ / / /3 9/3-9/3 3/3-3/ (SCU) 7MM /3 7/3-9/6 -/8-5/ MM /3 9/3-5/3-5/6-7/ /6 5mm /6 -/8 5/6 /6 3-/4-37/ /3 06-3/ (SCU) 07 -/6 -/8-3/6-5/6-3/8-7/6 35MM 5/ / / / / / / SC INSERTS PAGE B--08 MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--
12 SELECTION/ SC AN SCU NORMAL UTY PILLOW BLOCKS A G BOLT IA H M J L S R MIN B MAX C L HSG C mm - -/ /6 0-3/6 -/4 55mm -/4-7/6 60mm - 4 -/6 70mm 5-5/6 75mm 5 (SCU) -5/6 75mm Relube No--Lube/Sealed for Life (--NL) With lingers PB-SC-08 PB-SC-0 PB--SC--40M PB-SC-0L PB-SC- PB-SC- PB--SC--45M PB-SC-5 PB-SC-00 PB--SC--50M PB-SCM-00 PB-SC-03 PB-SC-04 PB--SC--55M PB-SCM-04 PB-SC-07 PB--SC--60M PB-SCM-08 PB-SC- PB--SC--70M PB-SC-5 PB--SC--75M PB-SCU-5 PB--SCU--75M PB--SC--08--NL PB--SC--0--NL PB--SC--40M--NL PB--SC--0L--NL PB--SC----NL PB--SC----NL PB--SC--45M--NL PB--SC--5--NL PB--SC--00--NL PB--SC--50M--NL PB--SCM--00--NL PB--SC--03--NL PB--SC--04--NL PB--SC--55M--NL PB--SCM--04--NL PB--SC--07--NL PB--SC--60M--NL PB--SCM--08--NL PB--SC----NL PB--SC--70M--NL PB--SC--5--NL PB--SC--75M--NL PB--SCU--5--NL PB--SC7--75M--NL PB--SC PB--SC--0-- PB--SC--40M-- PB--SC--0L-- PB--SC---- PB--SC---- PB--SC--45M-- PB--SC--5-- PB--SC PB--SC--50M-- PB--SCM PB--SC PB--SC PB--SC--55M-- PB--SCM PB--SC PB--SC--60M-- PB--SCM PB--SC---- PB--SC--70M-- PB--SC--5-- PB--SC--75M-- PB--SCU--5-- PB--SCU--75M mm PB--SC--90M PB--SC--90M--NL PB--SC--90M-- Assembled to order EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5 B--
13 SELECTION/ SC AN SCU NORMAL UTY PILLOW BLOCKS Weight lbs. A B C Bolt kgs Min. Max. ia /6 7-/4-5/6 5-3/ mm M /3 7-7/ /6 -/ M -5/ /8 -/4 6 6-/ M / /6 6-3/8 7-7/6-3/ / mm M6 -/ / / /6-7/ mm M / / / mm M8 5-5/ / mm M 5-5/ / (SCU) 75mm M 8 90mm M G H J L M R S mm 9/ / / / / /6-9/ / / / /6 -/ / / / /6 -/4 55mm -7/ / / /4-7/6 60mm -7/ / / /6 70mm -5/ / / / /6-7/ mm (SCU) -5/6 75mm -7/ / mm SC INSERTS PAGE B--08 MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--3
14 B--4 SELECTION/ SCAH AN SCUAH AIR HANLING NORMAL UTY PILLOW BLOCKS G BOLT IA J M H B MIN MAX S A R E HSG C L 03 7mm PB-SCAH-008 PB-SCAH-00 PB--SCAH--7M 03 (SCU) 7mm PB--SCUAH--008 PB--SCUAH--00 PB--SCUAH--7M 04 0mm PB--SCAH--008L PB-SCAH-00L PB-SCAH-0 PB--SCAH--0M 05 5/6 5mm PB-SCAH-04 PB-SCAH-05 PB-SCAH-00 PB--SCAH--5M 06 --/6 -/8-3/ PB-SCAH-0 PB-SCAH-0 PB-SCAH-03 PB-SCAH-04S PB--SCAH--30M 06 (SCU) --/6 --/8-3/ PB-SCUAH-0 PB-SCUAH-0 PB-SCUAH-03 PB-SCUAH-04S PB--SCUAH--30M /6-3/8-7/ PB-SCAH-04 PB--SCAH--05 PB-SCAH-06 PB-SCAH-07 PB--SCAH--35M mm 3909 PB-SCAH-08 PB--SCAH--0 PB--SCAH--40M / PB--SCAH--0L PB-SCAH- PB-SCAH- PB--SCAH--45M 0-5/ PB-SCAH-5 PB--SCAH--00 PB--SCAH--50M -3/6 --/4 55mm PB--SCMAH--00 PB-SCAH-03 PB--SCAH--04 PB--SCAH--55M --/4-7/6 60mm PB--SCMAH--04 PB-SCAH-07 PB--SCAH--60M /6 70mm 487 PB--SCMAH--04 PB-SCAH- PB--SCAH--70M 5-5/6 75mm 395 PB-SCAH-5 PB--SCAH--75M 5 (SCU) --5/6 75mm PB--SCUAH--5 PB--SCUAH--75M Assembledtoorder SCAH LANGE BEARINGS PAGE B--4 SCMAH LANGE BEARINGS PAGE B--48 SCMAH PILLOW BLOCKS PAGE B--30
15 B--5 SELECTION/ SCAH AN SCUAH AIR HANLING NORMAL UTY PILLOW BLOCKS Weight lbs A B C Bolt G H J L M R S lbs kgs A B C min. max. Bolt ia. G H J L M R S 03 7mm / / / /8 M0 7/3.4 5/ / / / (SCU) 7mm / / / /8 M0 7/3.4 9/ / / / mm / / / / / /8 M0 7/3.4 7/ / / / /6 5mm / / / /8 M0 7/3.4 9/ / / / /6 -/8-3/ / / / M 5/6 3.8 / / / (SCU) --/6 --/8-3/ / / / M 5/ / / / /6-3/8-7/ / / /6 38. M 5/ / / mm / / / / M 9/ / / / / / / / / M 9/ / / / / / / / M6 --/ / / / /6 --/4 55mm / / / / M6 --7/ / / /4-7/6 60mm / / /6 0.6 M6 --7/ / / /6 70mm / / M8 --5/ / / / /6 75mm / M --7/ (SCU) --5/6 75mm / M --7/ / Assembledtoorder SCAH LANGE BEARINGS PAGE B--4 SCMAH LANGE BEARINGS PAGE B--48 SCMAH PILLOW BLOCKS PAGE B--30
16 SELECTION/ SCB NORMAL UTY PILLOW BLOCKS A S G R BOLT IA M J L H MIN MAX B C L HSG C 03 (SC) 7mm PB-SC-008 PB-SC-00 PB--SC--7M 04 0mm PB-SCB-008L PB-SCB-00L PB-SCB-0 PB--SCB--0M 05 5/6 5mm PB-SCB-04 PB-SCB-05 PB-SCB-00 PB--SCB--5M 06 -/6 -/8-3/ PB-SCB-0 PB-SCB-0 PB-SCB-03 PB-SCB-04S PB--SCB--30M 07-5/6-3/8-7/ PB-SCB-04 PB-SCB-05 PB-SCB-06 PB-SCB-07 PB--SCB--35M Assembledtoorder. EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5 B--6
17 SELECTION/ SCB NORMAL UTY PILLOW BLOCKS 03 (SC) 7mm Weight A B C /3 3.0 Min. 3-/4 8.6 Max. 4-/6 03. Bolt ia. 3/8 M0 04 0mm / / / / / /8 M0 05 5/6 5mm / / / /8 M0 06 -/6 -/8-3/ / / / M 07-5/6-3/8-7/ / / /6 38. M 03 (SC) mm 0mm 5/6 5mm -/6 -/8-3/6-5/6-3/8-7/6 G H J L M R S 7/3 5/3-5/3 3/3 -/ /3 5/3 - -/ /3 5/3 -/3-5/6-5/ /6 3-3/6-37/64-9/ /6 /3 3-/6-7/3-3/ SC INSERTS PAGE B--08 MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--7
18 SELECTION/ SCB NORMAL UTY PILLOW BLOCKS A S G R BOLT IA M J L H MIN MAX B C L HSG C mm PB-SCB-08 PB-SCB-0 PB-SCB-40M / PB-SCB-0L PB-SCB- PB-SCB- PB-SCB-45M 0-5/ PB-SCB-5 PB-SCB-00 PB-SCB-50M -3/6 -/4 55mm PB-SCB-00L PB-SCB-03 PB-SCB-04 PB-SCB-55M -/4-7/6 60mm PB-SCB-04L PB-SCB-07 PB-SCB-60M 5-5/6 75mm 377 PB-SCB-5 PB-SCB-75M Assembledtoorder. EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5 B--8
19 B--9 SELECTION/ SCB NORMAL UTY PILLOW BLOCKS Weight lb A B C B lt g lbs kgs A B C Min. Max. Bolt ia mm / / / / M / / / /8 6.9 M 0-5/ / / / M6-3/6 -/4 55mm / / / / M6 -/4-7/6 60mm / / /6 0.6 M6 5-5/6 75mm / M G H J L M R S mm 9/ / / /6-9/3 3.0 / / / / /6 -/3 6. / / / / /6 -/4 55mm -7/ / / / / /4-7/6 60mm -7/ / / / / /6 75mm -7/ / / / SC INSERTS PAGE B--08 RELATE PROUCTS PAGE B--43 MOIICATIONS PAGE B--9
20 SELECTION/ SCBAH AIR HANLING NORMAL UTY PILLOW BLOCKS A S R G BOLT IA H M J L B MIN MAX E HSG C mm 5/6 5mm --/6 -/8-3/6 --5/6-3/8-7/ mm PB--SCBAH--008L PB--SCBAH--00L PB-SCBAH-0 PB--SCBAH--0M PB--SCBAH--04 PB--SCBAH--05 PB-SCBAH-00 PB--SCBAH--5M PB--SCBAH--0 PB--SCBAH--0 PB-SCBAH-03 PB-SCBAH-04S PB--SCBAH--30M PB-SCBAH-04 PB--SCBAH--05 PB--SCBAH--06 PB-SCBAH-07 PB--SCBAH--35M PB-SCBAH-08 PB--SCBAH--0 PB--SCBAH--40M /6 - -5/6-3/6 --/4 55mm --/4-7/6 60mm -5/6 75mm Assembledtoorder PB--SCBAH--0L PB-SCBAH- PB--SCBAH-- PB--SCBAH--45M PB-SCBAH-5 PB-SCBAH-00 PB--SCBAH--50M PB--SCBAH--00L PB-SCBAH-03 PB--SCBAH--04 PB--SCBAH--55M PB--SCBAH--04L PB-SCBAH-07 PB--SCBAH--60M PB--SCBAH--5 PB--SCBAH--75M SCAH PILLOW BLOCKS PAGE B--0 & B-- SCAH LANGE BEARINGS PAGE B--4 B--0 SCMAH PILLOW BLOCKS PAGE B--30 SCMAH LANGE BEARINGS PAGE B--48
21 SELECTION/ SCBAH AIR HANLING NORMAL UTY PILLOW BLOCKS mm 5/6 5mm --/6 -/8-3/6 --5/6-3/8-7/ mm -- -/6 - -5/6-3/6 --/4 55mm --/4-7/6 60mm -5/6 75mm Weight lbs A B C kgs.6 --5/3 5--/4 --/ / / /64 6--/ / /6 7--/4 --5/ /3 7--7/ /8 --/ / / / / / min. 3--3/ / / / / / max. 4--3/ / / / / / Bolt G H J L M R S ia. 3/8 M0 3/8 M0 M M M M M6 M6 M6 M 7/3.4 7/3.4 5/ / / / / / / / /3.9 5/ / /6 7.5 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /3 5. 9/3 5. 9/ / / / / / / / / / / / / SCAH PILLOW BLOCKS PAGE B--0 & B-- SCAH LANGE BEARINGS PAGE B--4 B-- SCMAH PILLOW BLOCKS PAGE B--30 SCMAH LANGE BEARINGS PAGE B--48
22 SELECTION/ SCEZ AN SCNP NORMAL UTY COATE PILLOW BLOCKS A S R G J L BOL T IA H M MIN MAX CL HSG C B With lingers Nickel Plated Corr. Resistant Insert With lingers Nylon Coated Corr. Resistant Insert 03 7mm PB-SCNP-008 PB-SCNP-00 PB--SCNP--7M PB-SCNP-008--CR PB-SCNP-00--CR PB--SCNP--7M --CR PB--SCEZ NY PB--SCEZ--00--NY PB--SCEZ--7M--NY PB--SCEZ NYCR PB--SCEZ--00--NYCR PB--SCEZ--7M--NY CR 03 (SCU) 7mm PB--SCUNP--008 PB--SCUNP--00 PB--SCUNP--7M PB--SCUNP CR PB--SCUNP--00--CR PB--SCUNP--7M --CR PB--SCUEZ NY PB--SCUEZ--00--NY PB--SCUEZ--7--NY PB--SCUEZ NYCR PB--SCUEZ--00--NYCR PB--SCUEZ--7--NY CR 04 0mm PB-SCNP-008L PB-SCNP-00L PB-SCNP-0 PB--SCNP--0M PB-SCNP-008L--CR PB-SCNP-00L--CR PB-SCNP-0--CR PB--SCNP--0M --CR PB--SCEZ--008L--NY PB--SC3Z--00L--NY PB--SCEZ--0--NY PB--SCEZ--0M--NY 5475 PB--SCEZ--008L--NYCR PB--SC3Z--00L--NYCR PB--SCEZ--0--NYCR PB--SCEZ--0M--NY CR 05 5/6 5mm PB-SCNP-04 PB-SCNP-05 PB-SCNP-00 PB--SCNP--5M PB-SCNP-04--CR PB-SCNP-05--CR PB-SCNP-00--CR PB--SCNP--5M --CR PB--SCEZ--04--NY PB--SCEZ--05--NY PB--SCEZ--00--NY PB--SCEZ--5M--NY PB--SCEZ--04--NYCR PB--SCEZ--05--NYCR PB--SCEZ--00--NYCR PB--SCEZ--5M--NY CR 06 -/8-3/ PB-SCNP-0 PB-SCNP-03 PB--SCNP--04S PB--SCNP--30M PB-SCNP-0--CR PB-SCNP-03--CR PB--SCNP--04S--CR PB--SCNP--30M --CR PB--SCEZ--0--NY PB--SCEZ--03--NY PB--SCEZ--04S--NY PBSCNP--30M--NY PB--SCEZ--0--NYCR PB--SCEZ--03--NYCR PB--SCEZ--04S--NYCR PBSCNP--30M--NY CR 06 (SCU) -/8-3/6 PB--SCUNP--0 PB--SCUNP--03 PB--SCNP--04S PB--SCUNP--30M PB--SCUNP--0--CR PB--SCUNP--03--CR PB--SCNP--04S--CR PB--SCUNP--30M --CR PB--SCUEZ--0--NY PB--SCUEZ--03--NY PB--SCUEZ--04S--NY PB--SCUEZ--30M--NY PB--SCUEZ--0--NYCR PB--SCUEZ--03--NYCR PB--SCUEZ--04S--NYCR PB--SCUEZ--30M--NYCR 07-3/8-7/ PB-SCNP-04 PB-SCNP-06 PB-SCNP-07 PB--SCNP--35M PB-SCNP-04--CR PB-SCNP-06--CR PB-SCNP-07--CR PB--SCNP--35M --CR PB--SCEZ--04--NY PB--SCEZ--06--NY PB--SCEZ--07--NY PB--SCEZ--35M--NY PB--SCEZ--04--NYCR PB--SCEZ--06--NYCR PB--SCEZ--07--NYCR PB--SCEZ--35M--NY CR Assembledtoorder MOIICATIONS PAGE B--9 B--
23 SELECTION/ SCEZ AN SCNP NORMAL UTY COATE PILLOW BLOCKS (SCU) (SCU) 07 7mm 7mm 0mm 5/6 5mm -/8-3/6 -/8-3/6-3/8-7/6 Weight lbs A B C kgs / / / / / / / / / / / / min. 3--/ / / / / / /6 9. max. 4--/ / / /6 38. Bolt. G H J L M R S ia. 3/8 7/3 5/3 --5/3 3/3 --/ M0 3/8 M0 3/8 M0 3/8 M0 M M M.4 7/3.4 7/3.4 7/3.4 5/ / / /3 5. 7/ /3 5. / / / / / / / / / / / / / / / / / MOIICATIONS PAGE B--9 B--3
24 SELECTION/ SCEZ AN SCNP NORMAL UTY COATE PILLOW BLOCKS A S R G BOLT IA. M J L H MIN MAX C L HSG C B With lingers Nickel Plated Corr. Resistant Insert With lingers Nylon Coated Corr. Resistant Insert mm PB-SCNP-08 PB-SCNP-0 PB--SCNP--40M PB-SCNP-08--CR PB-SCNP-0--CR PB--SCNP--40MV 558 PB--SCEZ--08--NY PB--SCEZ--0--NY PB--SCEZ--40M--NY 5480 PB--SCEZ--08--NYCR PB--SCEZ--0--NYCR PB--SCEZ--40M--NY CR / PB--SCNP--0L PB-SCNP- PB-SCNP- PB--SCNP--45M PB--SCNP--0L--CR PB-SCNP---CR PB-SCNP---CR PB--SCNP--45M--CR PB--SCEZ--0L--NY PB--SCEZ----NY PB--SCEZ----NY PB--SCEZ--45M--NY PB--SCEZ--0L--NYCR PB--SCEZ----NYCR PB--SCEZ----NYCR PB--SCEZ--45M--NY CR 0-5/ PB-SCNP-5 PB-SCNP-00 PB--SCNP--50M PB-SCNP-5--CR PB-SCNP-00--CR PB--SCNP--50M --CR PB--SCEZ--5--NY PB--SCEZ--00--NY PB--SCEZ--50M--NY PB--SCEZ--5--NYCR PB--SCEZ--00--NYCR PB--SCEZ--50M--NY CR -3/6 -/4 55mm PB-SCMNP-00 PB-SCNP-03 PB-SCNP-04 PB--SCNP--55M 4894 PB-SCMNP-00--CR PB-SCNP-03--CR PB-SCNP-04--CR PB--SCNP--55M --CR PB--SCMEZ--00--NY PB--SCEZ--03--NY PB--SCEZ--04--NY PB--SCEZ--55M--NY PB--SCMEZ--00--NYCR PB--SCEZ--03--NYCR PB--SCEZ--04--NYCR PB--SCEZ--55M--NY CR --/4-7/6 60mm PB-SCMP-04 PB-SCNP-07 PB--SCNP--60M PB-SCMP-04--CR PB-SCNP-07--CR PB--SCNP--60M --CR PB--SCMEZ--04--NY PB--SCEZ--07--NY PB--SCEZ--60M--NY PB--SCMEZ--04--NYCR PB--SCEZ--07--NYCR PB--SCEZ--60M--NY CR /6 70mm 6834 PB--SCMNP--08 PB--SCNP-- PB--SCNP--70M PB--SCMNP--08--CR PB--SCNP----CR PB--SCNP--70M --CR 0558 PB--SCMEZ--08--NY PB--SCEZ----NY PB--SCEZ--70M--NY PB--SCMEZ--08--NYCR PB--SCEZ----NYCR PB--SCEZ--70M--NY CR 5-5/6 75mm PB-SCNP-5 PB--SCNP--75M PB-SCNP-5--CR PB--SCNP--75M --CR 0577 PB--SCEZ--5--NY PB--SCEZ--75M--NY PB--SCEZ--5--NYCR PB--SCEZ--75M--NY CR 5 (SCU) --5/6 75mm PB--SCUNP--5 PB--SCUNP--75M PB--SCUNP--5--CR PB--SCUNP--75M --CR PB--SCUEZ--5--NY PB--SCUEZ--75M--NY PB--SCUEZ--5--NYCR PB--SCUEZ--75M--NYCR Assembledtoorder MOIICATIONS PAGE B--9 B--4
25 B--5 SELECTION/ SCEZ AN SCNP NORMAL UTY COATE PILLOW BLOCKS Weight lbs kgs A B C Bolt. ia. G H J L M R S mm / / / / M 9/ / / / / / / / /8 6.9 M 9/ / / / / / / / M6 --/ / / / /6 -/4 55mm / / / / M6 --7/ / / /4-7/6 60mm / / /6 0.6 M6 --7/ / / /6 70mm / / M8 --5/ / / / /6 75mm / M --7/ (SCU) --5/6 75mm / M --7/ / MOIICATIONS PAGE B--9
26 SELECTION/ SCH--E EXPANSION AN SCH NON-EXPANSION NORMAL UTY PILLOW BLOCKS G J MIN MAX B H S M A R U V W X RECOMMENE OWEL SIZE L C BOLT /6 --/8-3/6 --/4 --5/6 --3/8-7/6 Expansion Non--Expansion escrip- tion / / /6 --5/6-3/6 --/4 55mm --3/6 --/4-7/6 60mm Assembled to order PB--SCMH--00--E PB--SCH--0--E PB--SCH--0--E PB--SCH--03--E PB--SCH--04S--E PB--SCH--30M--E PB--SCH--04--E PB--SCH--05--E PB--SCH--06--E PB-SCH-07-E PB--SCH--35M--E PB--SCMH--08--E PB--SCH--0L--E PB--SCH----E PB--SCH----E PB--SCH--45M--E PB--SCMH----E PB--SCMH----E PB--SCH--5--E PB--SCH--00--E PB--SCH--50M--E PB--SCMH--5--E PB--SCMH--00--E PB--SCH--03--E PB--SCH--04--E PB--SCH--55M--E PB--SCMH--03--E PB--SCMH--04--E PB--SCH--07--E PB--SCH--60M--E # # # # # PB--SCMH--00 PB--SCH--0 PB--SCH--0 PB--SCH--03 PB--SCH--04S PB--SCH--30M PB--SCH--04 PB--SCH--05 PB--SCH--06 PB--SCH--07 PB--SCH--35M PB--SCMH--08 PB--SCH--0L PB--SCH-- PB--SCH-- PB--SCH--45M PB--SCMH-- PB--SCMH-- PB--SCH--5 PB--SCH--00 PB--SCH--50M PB--SCMH--5 PB--SCMH--00 PB--SCH--03 PB--SCH--04 PB--SCH--55M PB--SCMH--03 PB--SCMH--04 PB--SCH--07 PB--SCH--60M Alternative Non--Exp PB--SCM--03 PB--SC--04 PB--SCM--30M PB--SCM--07 PB--SCM--35M PB--SCM-- PB--SCM-- PB--SCM--45M [B--SCM--5 PB--SCM--00 PB--SCM--50M PB--SCM--03 PB--SCM--04 PB--SCM--55M PB--SCM EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5 B--6
27 SELECTION/ SCH--E EXPANSION AN SCH NON-EXPANSION NORMAL UTY PILLOW BLOCKS /6 --/8 /8-3/6 --/4 --5/6 --3/8-7/ / / /6 --5/6-3/6 --/4 55mm --3/6 --/4-7/6 60mm Weight lbs A B C kgs Min. Max. Bolt G H J 5.0-5/64 6-9/ /6 5-5/6 /6 3-3/ M /3 7-/4 -/8 5-/4 5-- /6 3--5/ M /3 8--/8 --3/ /6 4--9/ M /8 6--3/8 7-/4 -/8 3/6 5-/ M / / M / /6 6-/ M L M R S T U V W X --/6 --/8 /8-37/64-3/64 9/3 3/6 --9/3 5--3/6 9/6 3/6-3/ /4-7/3 --5/6 -/3 3/6 3--7/ /3 /6 3/6 --5/6 --3/8-7/ /3 --/4 9/3 --/8 /4 3--/6 7--3/8 3/6 3/ / /6-7/6-9/3-5/3 /4 3--5/ /6 3/ / /6-3/3 - -7/3 /4 4--/ /6-3/6 --/4 55mm /6-3/3 3 43/64-5/6 / /6 3/6 --/4-7/6 60mm MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43 B--7
28 B--8 SELECTION/ SCM MEIUM UTY PILLOW BLOCKS MAX MIN IA BOLT G B J M H HSG A S R C L C L Relube No--Lube/Sealed for Life (--NL) With lingers 06 5mm PB-SCM-00 PB--SCM--5M PB-SCM-00--NL PB--SCM--5M--NL PB-SCM-00-- PB--SCM--5M / PB-SCM-03 PB-SC-04 PB--SCM--30M 0575 PB-SCM-03--NL PB-SC-04--NL PB--SCM--30M--NL 3097 PB-SCM-03-- PB-SC-04-- PB--SCM--30M / PB-SCM-07 PB--SCM--35M 6855 PB-SCM-07--NL PB--SCM--35M--NL PB-SCM-07-- PB--SCM--35M mm PB-SCM-08 PB--SC--0L PB--SC--40M PB-SCM-08--NL PB--SC--0L--NL PB--SC--40M--NL PB-SCM-08-- PB--SC--0L-- PB--SC--40M-- 0 -/ PB-SCM- PB-SCM- PB--SC--45M PB-SCM---NL PB-SCM---NL PB--SC--45M--NL 0598 PB-SCM--- PB-SCM--- PB--SC--45M-- -5/ PB-SCM-5 PB-SCM-00 PB--SCM--50M PB-SCM-5--NL PB-SCM-00--NL PB--SCM--50M--NL PB-SCM-5-- PB-SCM-00-- PB--SCM--50M-- -3/6 -/4 55mm PB-SCM-03 PB-SCM-04 PB--SC--55M PB-SCM-03--NL PB-SCM-04--NL PB--SC--55M--NL 6858 PB-SCM-03-- PB-SCM-04-- PB--SC--55M-- 4-7/6-65mm PB-SCM-07 PB-SCM-08 PB--SC--65M 6857 PB-SCM-07--NL PB-SCM-08--NL PB--SC--65M--NL PB-SCM-07-- PB-SCM-08-- PB--SC--65M-- 5 -/6 70mm PB-SCM- PB--SC--70M 6533 PB-SCM---NL PB--SC--70M--NL PB-SCM--- PB--SC--70M-- 6-5/6 3 75mm PB-SCM-5 PB-SCM-300 PB--SC--75M PB-SCM-5--NL PB-SCM-300--NL PB--SC--75M--NL PB-SCM-5-- PB-SCM PB--SC--75M /6 3-85mm PB-SCM-307 PB-SCM-308 PWB--SCM--85M PB-SCM-307--NL PB-SCM-308--NL PWB--SCM--85M--NL PB-SCM PB-SCM PWB--SCM--85M-- Assembled to order EATURE/BENEITS SETSCREW BALL BEARINGS PAGE B-- HOW TO ORER/ PAGE B--4 SELECTION PAGE B--5
29 B--9 SELECTION/ SCM MEIUM UTY PILLOW BLOCKS Weight lbs A B C Bolt G H J L M R S lbs. k A B C Min Max Bolt i G H J L M R S kgs. Min. Max. ia. 06 5mm / / / M 5/ / / / / / / /6 38. M 5/ / / / / / / / M 9/ / / / / mm / / /8 6.9 M 9/ / / / / / / / M6 -/ / / / / / / / / M6-7/ / / /6 -/4 55mm / / /6 0.6 M6-7/ / / /6-65mm / / M8-5/ / / / /6 70mm / M -7/ /6 3 75mm / M -7/ / / /6 3-85mm / / / M -9/ / / MOIICATIONS PAGE B--9 RELATE PROUCTS PAGE B--43
HOW TO ORDER/ NOMENCLATURE
HOW TO ORDER/ Setscrew Ball Bearings - Inch HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offering have part numbers with listings shown throughout this catalog. Use of
More informationCONTENTS. Setscrew Ball Bearings
CONTENTS Features / Benefits... B4-3 How to Order / Nomenclature... B4-5 Selection... B4-6 Selection/Dimensions Pillow Blocks SC - Normal Duty... B4-12 SCAH Air Handling Normal Duty... B4-16 SCB Normal
More informationFEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
More informationSet screw mounted ball bearings
Features/Benefits For over 70 years, Dodge has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art
More informationCONTENTS. D-LOK Ball Bearings
CONTENTS Ball Bearings Features/Benefits.................................................. B5-2 How to Order/Nomenclature......................................... B5-4 Selection........................................................
More informationRecommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom.
Bearing Reference ULTRA KLEEN E-Z KLEEN Extreme Duty Setscrew Ball Bearing GRIP TIGHT D-LOK Ball Bearing SELECTION Setscrew Ball Bearings Setscrew Key Hex Across Flats Recommended Setscrews D-LOK Mounting
More informationF A / Co e. Shaft Tolerances Normal Shaft Size Commercial Recommended Shaft Tolerances Inches Shaft Tolerances Eccentric Lock Ball Bearings
s Ball Take-Up Frames Engineering Part Number Index Keyword Index s DODGE mounted ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined
More informationCONTENTS. GRIP TIGHT Adapter Ball Bearings
CONTENTS GRIP TIGHT Adapter Ball Bearings Features / Benefits.................................................... B2-2 How to Order / Nomenclature............................................ B2-4 Selection............................................................
More informationExtreme Duty mounted ball bearings
3-2 ABB Mounted bearings Metric Features/Benefits The Dodge SC/SCMED Extreme Duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge-only features such
More informationHOW TO ORDER SPECIAL FINISHES
HOW TO ORDER There are two ways to specify DODGE Bearings. Most of the product offerings have part numbers with listings shown throughout this catalog. Use of part numbers ensures accurate order processing.
More informationCONTENTS. IMPERIALt. Impact Spanner Wrench. IMPERIAL Lockplate Kit... B Features / Benefits. IP Pillow Blocks Bolt
CONTENTS IMPERIALt Features / Benefits... B8--2 Nomenclature... B8--3 Selection... B8--6 Selection/Dimensions... B8--14 IP Pillow Blocks -- 2--Bolt IP Pillow Blocks -- 4--Bolt...... B8--14 B8--16 ISAF
More informationFEATURES/BENEFITS. Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments
Type E-Xtra DODGE Type E One Bearing, One Seal For Dusty or Damp Environments The Original DODGE Type E Bearing, Only Better New Dodge manufactured bearings increase load ratings 13-14% depending on size
More informationTOLERANCE, INCHES UP TO 1-1/ /16 TO 2-1/ /2 TO /16 TO /16 TO assistance.
SPECIAL DUTY-DOUBLE ROW TAPERED ROLLER BEARINGS DODGE Double Row Tapered Roller Bearings have the highest capacity of all DODGE Tapered Roller Bearings. They carry heavy radial loads and combined radial
More informationProduct Brochure. Setscrew mounted ball bearings
Product Brochure Setscrew mounted ball bearings 2 ABB Motors and Generators Setscrew mounted ball bearings We provide motors, generators and mechanical power transmission products, services and expertise
More informationFeatures And Benefits.IMPERIAL... B14-2.IMPERIAL-IP... B14-4.IMPERIAL-HD... B14-6 ISAF-HYD... B14-10.ISN / ISNX-HYD... B14-12
CONTENTS - IP, ISAF and ISN Features And Benefits..................................................................... B14-2.-IP... B14-4.-HD... B14-6 ISAF-HYD...................................................................
More informationCONTENTS. IMPERIAL - IP, ISAF and ISN
CONTENTS IMPERIAL - IP, ISAF and ISN Features / Benefi ts IMPERIAL.......................................................... B10-3 IMPERIAL-E........................................................ B10-8
More information( ) x ( ) SELECTION. IMPERIAL - IP and ISAF Spherical Roller Bearing GENERAL
IMPERIAL - ISAF UNIFIED Plummer Sleeve Bearing SLEEVEOIL SELECTION DODGE Spherical Roller Bearings have the capacity carry heavy radial loads and combined radial and thrust loads. The maximum recommended
More informationCatalog June Mounted Bearings
Catalog June 2014 Mounted Bearings Contents. Ultra Kleen Features/Benefits.... 1-3 How to order/nomenclature............................................. 1-6 Easy Selection.... 1-7..................................................
More informationCONTENTS. Speciality Tapered Products
CONTENTS Products Features / Benefi ts Type C............................................................ B7-2 Special Duty, Hinged Cap............................................... B7-3 All Steel............................................................
More informationBearing Reference CONTENTS. Guide S-2000
ONTENTS Features / Benefits... B12-2 Specifications........................................................... B12-4 How to Order... B12-4 Nomenclature...........................................................
More informationSpecial Duty, Hinged Cap... B Special Duty, Hinged Cap & Traction Wheel... B Pillow Blocks... B6--56
CONTENTS Specialty Tapered Products Features/Benefits Type C... B6--2 Special Duty, Hinged Cap... B6--3 All Steel... B6--4 Specification Type C... B6--5 Special Duty, Hinged Cap & Traction Wheel... B6--22
More informationSelection of DODGE E-Z KLEEN Polymer and Stainless Steel Housed Ball Bearings. P = (X x F R ) + (Y x F A ) F A C o
Selection of DODGE and Stainless Steel Housed Ball Bearings DODGE ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined radial/thrust
More informationDODGE E-Z KLEEN and ULTRa KLEEN BaLL BEaRiNGs
DODGE E-Z KLEEN and ULTRA KLEEN Ball Bearings DODGE E-Z KLEEN an d ULTRA KLEEN Ba l l Bear ings For over 125 years, the DODGE brand has been synonymous with the best the industry has to offer. Bearing
More informationProduct Brochure. E-Z Kleen and Ultra Kleen ball bearings
Product Brochure E-Z Kleen and Ultra Kleen ball bearings We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers, processes
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationEPT Mounted Bearing Technical Support. Phone: FAX: Mounted Bearing Application Engineering
ENGINEERING EPT Mounted Bearing Technical Support Browning Technical Services Phone: 606-564-2093 FAX: 606-564-2079 Mounted Bearing Application Phone: 219-465-2211 FAX: 219-465-2290 E-mail: browningbearing.eng@emerson-ept.com
More informationCONTENTS. DODGE Plummer Blocks
CONTENTS DODGE Plummer Blocks Features/Benefits.......................................... B12-2 How To Order............................................. B12-4 Nomenclature.............................................
More informationSPECIFICATIONS. Housing
SPECIFICATIONS Housing Grade 30 cast iron is the standard housing material except on SAFS housings. When steel housings are required, the SAFS bearing line is recommended. SPECIAL DRILLING The standard
More informationNICE Unground Industrial Product
Nice Ball Bearings In 902, William Nice founded one of the first anti-friction bearing manufacturers. Starting with unground ball bearing types and progressing into fully ground types, NICE today produces
More informationCYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
More informationSpecialty Ball Bearings
Specialty all earings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RC earings Incorporated (RC earings, RC) has had a long
More informationEccentric Collar Ball CONTENTS. Bearing
CONTENTS Specialty Tapered Features / Benefits Type C...B11-2 Special Duty, Hinged Cap.......................................... B11-3 ll Steel...B11-4 Specifications Type C...B11-5 Special Duty, Hinged
More informationCENTRIK-LOK MOUNTED BALL BEARINGS 7-29
INEX Page Mounted Ball Bearing Engineering Section 4-6 CENTRIK-OK MOUNTE BA BEARINGS - General information - Radial oad Ratings 0- Optional Sealing Arrangements Nomenclature KC4 Krown Regal Centrik-ok
More informationERX-TREME Cylindrical OD PN Gold Bearings. High Phosphorus Nickel Plated Outer Race with Tapered Land Race Profile. Land Riding Brass Retainer
Sealmaster PN Gold Style Ball Bearings Sealmaster PN Gold bearings feature high phosphorus, electroless nickel coated steel with patented seal technology and tapered land outer race profile available in
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Spherical Roller earings Units: Rexnord PT Select Series Contents Page eatures and enefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow locks 198 lange locks 202 Industries Served Aggregates
More informationMarathon series corrosion resistant products
Marathon series corrosion resistant products Contents 2 Introduction 6 End covers 8 Composite units 22 Stainless steel take-up frames 24 Cast stainless steel units 28 ZMaRC-coated insert bearings Stainless
More informationBasic Static Load Rating of Rolling Contact Bearings
Basic Static Load Rating of Rolling Contact Bearings The load carried by a non-rotating bearing is called a static load. The basic static load rating is defined as the static radial load (in case of radial
More informationSELECTION. UNIFIED Pillow Block - Spherical Roller Bearings (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) SHAFT TOLERANCES Shaft Size
UNIFIED Pillow Block - Spherical Roller (USAF 500, 600, 200, 300 SERIES AND USDAF 23000, 23100, 23200) DODGE UNIFIED Spherical Roller have the capacity to carry heavy radial loads and combined radial and
More informationCam Follower Bearings
Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications
More informationLink-Belt Cylindrical Roller Bearings
Link-Belt Cylindrical Roller s These bearings require minimum space and provide maximum rated capacity. Link-Belt Cylindrical Roller s Features & Benefits - 1 Link Belt Cylindrical Roller s Features and
More informationSpherical Roller Bearings Units: Rexnord PT Select Series
Excerpt from Rexnord Bearings Catalog #BR101-100EN Spherical Roller Bearings Units: Rexnord PT Select Series Contents Page Features and Benefits 192 Nomenclature 193 Engineering 194 Dimensions Pillow Blocks
More informationGeneral Purpose Clutches FSO/HPI
General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light
More informationSpecialty Ball Bearings
Specialty Ball Bearings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RBC Bearings Incorporated (RBC Bearings, RBC) has had
More informationTHE REX DESIGN REPLACEABLE BEARING
Bearings Rexnord Roller Bearings (English-Inch) THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT Can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty,
More informationInstallation Procedures
For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision
More informationStainless Steel Couplings, Universal Joints & Shaft Accessories
Stainless Steel Couplings, Universal Joints & Shaft Accessories E SSFC Series - Insert (3 Jaw) Type Coupling 316 stainless steel with passivated finish Precision machined bore or solid hubs Three types
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationFAG Angular Contact Thrust Ball Bearings double direction
FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine
More informationMounting Overlap Shield. Face Clamps. Gap. Seat Depth. Lead In Chamfer. Loose Fit.
Mounting Introduction: Reali-Slim thin section ball bearings have a crosssection thickness that is much thinner than standard bearings of the same diameter, and are therefore more sensitive to shaft and
More informationAgriculture Leadership
Agriculture Agriculture Leadership Agriculture customers turn to Timken for products and services that are designed for high performance, extended equipment life and enhanced productivity. Whether you
More informationHigh Value Bearing Products
High Value Bearing Products Mounted Bearings Enclosed Gearing PT Components Offering mechanical power transmission products for more than 140 years High quality, high value, long-lasting, feature-rich
More informationDODGE INSTRUCTION MANUAL for TAF Pillow Blocks & S-1 Units
DODGE INSTRUCTION MANUAL for TAF Pillow Blocks & S-1 Units FITTING OR REPLACING A UNIT IN A PILLOW BLOCK WARNING To ensure that drive is not unexpectedly started, turn off and lock out or tag power source
More informationTHE REX DESIGN. RUGGED HOUSING Standard material cast iron. Steel or ductile iron available on request.
THE REX DESIGN EASY BEARING CLEARANCE ADJUSTMENT can be field adjusted to meet application needs. REPLACEABLE BEARING Available in Normal Duty, Medium Duty, Heavy Duty and Adapter Sleeve mounting to suit
More informationBall bearing units and insert bearings. A supplement to SKF bearings and mounted products (pub # )
Ball bearing units and insert bearings A supplement to SF bearings and mounted products (pub #100-700) TAB OF ONTNTS Ball bearing units nomenclature... 1 Ball bearing units... 2 locking methods... 4 Seal
More informationMOLINE PRODUCT LINE -BOLT PILLOW BLOCK 4-BOLT PILLOW BLOCK 4-BOLT FLANGE PILOTED FLANGE TYPE E TAPERED ROLLER BEARINGS -Bolt Pillow Block: shaft sizes
PRODUCT LINE MOLINE PRODUCT LINE -BOLT PILLOW BLOCK 4-BOLT PILLOW BLOCK 4-BOLT FLANGE PILOTED FLANGE TYPE E TAPERED ROLLER BEARINGS -Bolt Pillow Block: shaft sizes from, 5mm 90mm 4-Bolt Pillow Block: shaft
More informationBROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.
ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller
More informationMounted Spherical Roller Bearings
ounted odular bearing assembly consisting of sealed and lubricated spherical bearing with collar (setscrew) or concentric (adapter mount) locking system contained within a variety of housings types, mounting
More informationWhat is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
More informationSpecialty Ball Bearings
Specialty Ball Bearings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2008 www.rbcbearings.com 800.390.3300 RBC Bearings has had a long tradition of innovation,
More informationSlotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut.
R310EN 3301 (2009.08) Precision Ball Screw Assemblies Bosch Rexroth AG 113 Slotted nut NMG for economical constructions B D d d1 b M A = tightening torque of slotted nut a min. 0,3 Polyamide insert Designation
More informationSKF FAG Timken NSK NTN
BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection
More informationBearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
More informationClassification and Characteristics of Rolling Bearings
1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates
More informationMetric cam follower bearings
Metric cam follower bearings Cam follower stude type, standard P. 5-8 Cam follower stude type, heavy load P. 5-10 Cam follower yoke type, standard P. 5-12 Cam follower yoke type, heavy load P. 5-14 Per
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationCylindrical roller bearings
Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row
More information10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More information14 Track runner bearings
14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers
More informationTimken Spherical Plain Bearings. An industry standard throughout the world.
Timken Spherical Plain Bearings An industry standard throughout the world. From construction and mining to drawbridges, actuators and even the space shuttle crawler, Timken spherical plain bearings have
More informationMcGill CAMROL Bearings
McGill CAMROL Bearings Overview Features & Benefits Competition Product Selection Markets & Applications Summary Key Contacts 2 Product Overview Invented by McGill in 1937 Replaced designs using bolt &
More informationTIMKEN TYPE E TAPERED ROLLER BEARING HOUSED UNITS
TIMKEN TYPE E TAPERED ROLLER BEARING HOUSED UNITS 1 TABLE OF CONTENTS Grow Stronger with Timken 3 Outstanding Performance from the Bearing Expert 4 Enhanced Performance, Lower Total Cost of Ownership 5
More informationMounted bearing installation and best practices for the grain industry
CONVEY 18 / 7-25-20 18 Mounted bearing installation and best practices for the grain industry Marc Mondi, Territory Manager ABB/Dodge Agenda OSHA standards related to grain handling bearings Bearing myths
More informationUC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More information4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
More informationKaydon white paper. The importance of properly mounting thin section bearings. an SKF Group brand. by Rob Roos, Senior Product Engineer
The importance of properly mounting thin section by Rob Roos, Senior Product Engineer an SKF Group brand Figure 1 Radial Load Reversing Thrust Overturning Moment Thin section ball have a much thinner cross-section
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationDouble-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
More informationENGINEERING CATALOG VOL 11
ENGINEERING CATALOG VOL ACCESSIBLE RESPONSIVE FLEXIBLE KNOWLEDGABLE QUALITY PROVEN HUMAN 220 EPC SSO RALPH GRAVES AND DAVID FAUNTLEROY MOLINE BEARING CO., BATAVIA, ILLINOIS BUSINESS [ biz-nis ] noun The
More informationMaryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
More informationLink-Belt Mounted& Unmounted Ball Bearings
Link-Belt ed& Unmounted Ball Bearings WARNING: These instructions should be read entirely and followed carefully before attempting to install or remove Link-Belt Ball bearings. Failure to do so can result
More informationCam Follower Bearings
Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications
More informationMarathon Series Corrosion Resistant Mounted Products and Bearing Units
MRC Bearing Services Marathon Series Corrosion Resistant Mounted Products and Bearing Units Composite Series Standard Duty HD i Series Heavy Duty Cast Iron XD s Series Extreme Duty Cast Stainless Contents
More informationTRANSLATION (OR LINEAR)
5) Load Bearing Mechanisms Load bearing mechanisms are the structural backbone of any linear / rotary motion system, and are a critical consideration. This section will introduce most of the more common
More informationDODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks
DODGE USN 500 and 600 Series Adapter Mount & 200 and 300 Series Direct Mount Plummer Blocks These instructions should be read thoroughly before installation or operation. GENERAL INFORMATION WARNING: To
More information12.1 SINGLE ROW BALL BEARINGS
12.1 SINGLE ROW BALL BEARINGS Due to the versatility of applications, single row ball bearings are among the most frequently used types of rolling bearings. They are made as non-separable without a filling
More informationPlastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
More informationBSA PIE (Product Information Exchange)
BSA PIE (Product Information Exchange) PIE (Product Information Exchange) is an industry data sharing system. The Bearing Specialists Association developed a PIE Attribute Template and Instructions document
More informationV-BELT DRIVES AND BEARINGS
V-BELT DRIVES AND BEARINGS The first name in air handling products Product types...3 Product features V-Belts... 4 B5V sheaves... 4 Variable speed sheaves... 5 Bushings... 5 Bearings... 5 Commercial-duty
More informationIntroduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
More informationHelical Multiplier Series
Helical Multiplier Series Section Contents HM Series eatures / How to Order...............................................240 HM Series standard products... 241 Mounting Assemblies.... 242 Lubrication
More informationQ&A Session for Advanced Linear Bearings and Guides 201 : Troubleshooting for Design Engineers
Q&A Session for Advanced Linear Bearings and Guides 201 : Troubleshooting for Design Engineers Date: April 22, 2009 Q: We are currently looking into using Self Lubricating Bushings in a high-load Off-
More informationTrack Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
More informationSECTION 1. Basic Information
SECTION 1 SECTION 1 This section covers both the basic technical information governing bearing selection and the part numbering system used in this catalog. When the part numbering is different from the
More informationPremium Type E Mounted Roller Bearing
Rexnord Roller Bearings Rexnord 5000 Series Premium Type E Mounted Roller Bearing Get Your Bearings and Stay on Track Rexnord 5000 Series Premium Type E Mounted Roller Bearings help your equipment stay
More information10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
More informationCONTENTS. Adaptable TIGEAR Right Angle Speed Reducers. Specification... How To Order...
CONTENTS Right Angle Speed Reducers Features/Benefits... G4--2 Specification... How To Order... G4--4 G4--5 Nomenclature Easy Selection...... G4--5 G4--6 Selection/Dimensions... Mounting Positions... G4--10
More informationTIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
More information