Forbes Marshall Pneumatic Actuator. Series MSP and SSP

Size: px
Start display at page:

Download "Forbes Marshall Pneumatic Actuator. Series MSP and SSP"

Transcription

1 Forbes Marshall Pneumatic Series MSP and SSP

2 Multi Spring (MSP Series) Forbes Marshall Pneumatic Diaphragm Protective cap housing Spring Diaphragm plate Diaphragm O ring spindle Yoke Stroke scanning lever Lift plate The Forbes Marshall pneumatic actuators can be opened or closed using spring force or control air. These actuators are field reversible and available with either single spring or multi spring options. The compressed spring ensures that the pneumatic actuator always achieves fail safe condition on air failure without any additional intervention. The actuator positions the control valve plug upon receipt of proportional signal through the positioner. These can be operated in to Open (ATO) function or with reverse action to Close (ATC) function. Multi-Spring (MSP) has additional advantage of compact design with low installation height, which is preferred by Industry. Single Spring (SSP Series) Cap Adjustment bolt Spring Diaphragm Diaphragm plate spindle Lift plate Yoke Temperature range Optional Max. allowable pressure supply connection -20ºC to 80ºC (-4ºF to 170ºF) -40ºC to 80ºC (-4ºF to 170ºF) 6 Bar (87 psig) ¼ NPT (½" available on request) Travel mm MSP Inch SSP

3 MSP Series - Features Yoke with Integral Duct Diaphragm Stroke Scanning Lever inlet Stroke scanning lever The yoke of the FM MSP Series actuator has a precision internal integrated path for passage of instrument air to the actuator diaphragm through the actuator housing. This advanced technology eliminates the need for any additional tubing for mounting the positioner on the yoke, thereby arresting extra impulse tube leakages, chances of damage during transit, it allows high operational reliability, precision and serviceability. The positioner shaft engages with the stroke scanning lever of the actuator (as shown in the diagram), thereby eliminating the need for external linkages. This design improves operational reliability, precision and serviceability. This design hence reduces maintenance costs for the user. Field Reversible at Site In In Fig. A ( to Open) Fig. B ( to Close) The MSP series pneumatic actuator allows easy reversal of the actuator at site with minimum manual intervention and without opening the actuator housing. Special plugs for aerating and bleeding ensure the highest possible protection against ingress of water and dust particles into the actuator housing.

4 MSP Series Cross Sectional View

5 MSP Series Parts List Sr. No. Component Material of Construction Handwheel 1 Rod/Tie Rod SS410 2 Intermediate Coupler SS304 3 Stopper SS410 4 Guiding Coupler AL. Bronze 5 Snap ring Spring Steel 6 DuBush Steel+PTFE 7 Needle roller bearing Chrome Steel 8 Locking Clutch SS Snap ring Spring Steel 10 Spindle SS Locator Ring SS Hex Bolt A193 B8 13 Outer Coupler SS Rod Seal Polyurethane 15 BSP Connector SS Cap with Vent Hole Polypropelene 17 Ring SS O Ring Nitrile Rubber 19 O Ring Nitrile Rubber 51 Spring Housing Carbon Steel-CRCA14 52 Spring Spring Steel 53 Diaphragm Nitrile Rubber 54 Diaphragm Plate Carbon Steel-CRCA14 55 Bush SS Hex Bolt A193 B8 57 Cup SS 440C 58 Cover Carbon Steel-CRCA14 59 O Ring Nitrile Rubber 60 O Ring Nitrile Rubber 61 DuBush Steel+PTFE 62 Rod Seal Polyurethane 63 Nut Support SS 316 Ti 64 Spindle SS Lever A 351 CF8 66 Support SG Iron 67 Lift Plate SS304 Spare parts Available spares are common for both to Open and to Close actuators Spare kit 14, 18, 19, 53, 59, 60, 61, 62 Repair kit 18, 19, 53, 59, 60, 61, 62, 63, 64

6 Multi Spring (MSP Series) D to Open Stroke mm/ inch MSP / 0.8 No of springs Pressure Control Force from to Bar / psig Kgf / Lbf / / / / / / 1079 E+HW E MSP-1-30 (Pre-Loading) MSP / / / / 29 3 / / / / / / / / / / / 1124 MSP / / / / / / / 2923 Dimensions and Weight Stroke E E+HW D Weight with HW mm/inch kgs/lbs MSP-1 20/ / / / / / / 35 MSP-2 30/ / / / / 92 60/ / / / / 103 MSP-2-60 (Pre-Loading) / / / / / / / / / / / / / / / / / / 1124 MSP-1-20 MSP-1-30 MSP-2-30 MSP-2-60 Diaphragm Area (cm²/inch²) 320 / / MSP / / / / / / / / / / 3148 to Close MSP / 0.8 MSP-1-30 MSP-2-30 Minimum Bar / psig Stroke No of Pressure 2 / 29 3 / / 58 5 / / 87 springs mm/inch Bar / psig Control Force Kgf / Lbf 30 / 1.2 MSP / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 2743

7 SSP Series - Features Spring Adjustable At Site Aluminium Housing Housing Adjustment Bolt An adjustment bolt has been used to adapt the spring pre-load with actuating forces required with pinpoint accuracy. FM SSP Series of actuators come with different centric springs and spring ranges which allow a very broad range of actuating forces to be optimally set. The setting is possible at site as well. High accuracy is achieved by rotating the adjustment bolt after opening the actuator cap. The bolt can be rotated both clockwise and anti-clockwise depending on requirement. This is possible on-line as well. The actuator housings are made from high grade aluminium which protects it from atmospheric corrosion. This feature allows the SSP series actuator to be used for marine environments. Aluminium construction makes this actuator extremely lightweight as well. Field Reversible at Site In In Fig. A ( to Open) Fig. B ( to Close) The SSP series pneumatic actuator allows easy reversal at site with minimum manual intervention and without opening the actuator housing. Special plugs for aerating and bleeding ensure the highest possible protection against ingress of water and dust particles into the actuator housing.

8 SSP Series Cross Sectional View

9 SSP Series List of Parts Sr. No. Name of Part Material of Construction Handwheel 1 Handwheel Alumunium Alloy 2 Castle Nut A194 Gr 4 3 Split Pin SS304 4 Bush SG Iron 5 Needle Roller Bearing Set Chrome Steel 6 Spindle A276 SS410 7 Clamp Ring C20/AISI Handwheel Support Alumunium Alloy 21 Slide Bearing Bronze Filled Ptfe 22 Needle Roller Bearing Set Chrome Steel 23 Adjustment Bolt A276 SS410, 24 Spring Plate Gray Cast Iron 25 O-ring Silicone Rubber 26 Spring Spring Steel 27 Spring Housing Alumunium Alloy 28 Diaphragm Cover Alumunium Alloy 29 Spindle A276 SS Hex Hd Bolt A194 Gr 4, Zinc Plated 31 Diaphragm Nitrile Rubber 32 Diaphragm Plate Alumunium Alloy 33 Diaphragm Housing Alumunium Alloy 34 Hex Lock Nut A194 4, Zinc Plated 35 O Ring Silicone Rubber 36 Hex Hd. Bolt Full Threaded A193 B8 37 Bush A276 SS Lift Plate A276 SS Support SG Iron Spare parts Available spares are common for to Open and to Close actuators Spare kit 21, 25, 31, 35 Repair kit 21, 25, 26, 30, 31, 32, 35, 37

10 Single Spring (SSP Series) Opening Function ( to Open-Spring to Close) E+HW E Dimensions and Weight SSP-1 SSP-2 SSP-3 D Stroke E E+HW D mm/inch Weight with HW kgs/lbs 20/ / / / / 42 30/ / / / / / / / / / / / / / / / / / /4 SSP-1-20/30 SSP-2-30/60 SSP-3-60/100/120 Diaphragm Area (cm²/inch²) 320 / / / SSP-1-20/30-S SSP-1-20-R SSP-1-30-R SSP-2-30-S SSP-2-30-R SSP-2-60-S SSP-2-60-R SSP-3-60-S SSP-3-60-R SSP S SSP R SSP S SSP R from Spring to Control force Bar / psig Kgf / Lbf 0.2 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 1852 Closing Function ( to Close-Spring to Open) Stroke (mm/inch) Spring Bar / psig 2.8 / / / / / / / / 87 Control Force Kgf / Lbf SSP-1-20/30 20/0.8 30/ bar 560 / / / / / / / / 3417 SSP-2-30/60 30/1.1 60/ / / / / / / / / 7772 SSP-3-60/100/120 60/ / / psig 2540 / / / / / / / / 15543

11 Multi Spring Maximum allowable differential pressure for metal seated valves with parabolic trim for Class IV shutoff F1100 & F1200 Series MSP 1-20 Pressure to Open 1/ / /2 PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 50/ / / / / / / /261 18/261 15/217.5 MSP 1-30 MSP 2-30 MSP 2-60 Pressure PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 6/87 4/58 3.5/ / / / / / / / / /55.2 MSP 1-20 MSP 1-30 MSP 2-30 MSP 2-60 Pressure Pressure supply to Close 1/ / /2 PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 3 / / / / / / / / / / / / / / / / / / / / / / / 87 50/ / / / / / / / / /725.2 supply PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 3 / / / / / / / / / / / / / / / / /261 16/232 11/ / / / / / / / 87 50/ / / / / /60.9 3/ / / / / / / / / /159.5 F1300 Series MSP 1-20 MSP 1-30 MSP 2-30 MSP 2-60 Pressure to Open 1 1 1/ PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 80.1 / / / / / / / / / / / / / / / / / / / / 55.2

12 F1300 Series MSP 1-20 MSP1-30 MSP 2-30 MSP 2-60 Pressure supply 3 / / / 87 3 / / / 87 3 / / / 87 3 / / / 87 to Close 1 1 1/ PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 80.1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Single Spring F1100, F1200, Series SSP-3-60 SSP SSP-3-60 SSP Spring Type Standard Reinforced Standard Reinforced Spring Spring Supply Maximum allowable differential pressure for metal seated valves with parabolic trim for Class IV shutoff to Open PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 6.8/ / / / / / / / / / / / / / / / / /15.9 1/ /11.6 to Close PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite PTFE Graphite 3 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Forbes Marshall Krohne Marshall Forbes Marshall Arca Codel International Forbes Solar Forbes Vyncke Forbes Marshall Steam Systems 480,California Avenue, Suite 102,P.O. Box Palo Alto CA California, USA Tel: / Fax: / Forbes Marshall Canada Inc Matheson Blvd East, 8th Floor Mississauga, ON L4W 5K4 Tel: Fax: fm.usa@forbesmarshall.com, ccmidc@forbesmarshall.com A-34/35, MIDC H Block Pimpri, Pune INDIA. Tel : 91(0) , Fax : 91(0) CIN No.: U28996PN1985PTC All rights reserved. Any reproduction or distribution in part or as a whole without written permission of Forbes Marshall Pvt Ltd, its associate companies or its subsidiaries ( FM Group ) is prohibited. Information, designs or specifications in this document are subject to change without notice. Responsibility for suitability, selection, installation, use, operation or maintenance of the product(s) rests solely with the purchaser and/or user. The contents of this document are presented for informational purposes only. FM Group disclaims liabilities or losses that may be incurred as a consequence of the use of this information. DOC#FMAINTOPS/0217/1008/V3.R0

Forbes Marshall Control Valve. Operational Economy with Optimum Control

Forbes Marshall Control Valve. Operational Economy with Optimum Control Forbes Marshall Control Valve Operational Economy with Optimum Control Forbes Marshall Control Valve The Forbes Marshall Control Valve provides excellent performance on steam, liquid and gas applications.

More information

Pressure Reducing and Desuperheating Valves

Pressure Reducing and Desuperheating Valves Pressure Reducing and Desuperheating Valves Solutions for Steam Conditioning Applications Energy Conservation Environment Process Efficiency www.forbesmarshall.com Features Compact design Pressure reduction

More information

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Description The PN9000 series actuators are a compact range of linear actuators that are available in 3 diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator

More information

TN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for 6 and 8 SPIRA-TROL Series Control Valves Description The TN2000 series pneumatic piston actuators are designed for use with 6" and 8" SPIRA-TROL control valves. There are three versions available: Single-acting (with spring), Double-acting (with

More information

STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")

STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½) to DN100 (4) Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are

More information

Precision Monitoring Devices Helping You Stay in Control

Precision Monitoring Devices Helping You Stay in Control Precision Monitoring Devices Helping You Stay in Control An Overview 1 5 0 6 Energy Conservation Environment Process Efficiency www.forbesmarshall.com Stainless Steel Pressure Gauge : SP Solid Front Pressure

More information

Electro-Pneumatic Positioner Series 830/831-WP/EX. Operation & Maintenance Manual

Electro-Pneumatic Positioner Series 830/831-WP/EX. Operation & Maintenance Manual Electro-Pneumatic Positioner Series 830/831-WP/EX Operation & Maintenance Manual Electro-Pneumatic Positioner Model 830/831- WP/EXP This operation & maintenance manual corresponds to Forbes Marshall Arca

More information

3-way control valve in mixing and diverting design

3-way control valve in mixing and diverting design with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices

More information

PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions

PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions 3579049/14 IM-P357-29 CTLS Issue 14 PN9000 Series Pneumatic Actuators Installation and Maintenance Instructions PN9100 PN9200 1. Safety information 2. General product information PN9300 3. Installation

More information

SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves

SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with

More information

Series VD Pneumatic diaphragm. actuators.

Series VD Pneumatic diaphragm. actuators. Series VD Pneumatic diaphragm actuators Metso's Neles series VD actuators are exclusively developed for linear valves. They provide safe and reliable operation and are well suited for many different kind

More information

87/88 Pneumatic Multi-Spring Diaphragm Actuators

87/88 Pneumatic Multi-Spring Diaphragm Actuators GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced

More information

Model DFRP Rotary Actuator

Model DFRP Rotary Actuator Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFRP actuators a rugged, long lasting product. DFRP actuators are manufactured

More information

Model DFLP Linear Actuator

Model DFLP Linear Actuator Features Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process and superior quality parts come together to make DFLP actuators a rugged, long lasting product. DFLP actuators are manufactured

More information

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1

VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1 SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators

More information

EN REV.

EN REV. Honeywell Series 6100 Pneumatically Operated Spring Opposed Diaphragm Actuators 70-17-10-05 EN REV. 2 09/2014 Page 1 of 7 Specification Series 6100 Pneumatically Operated Spring Opposed Diaphragm Actuators

More information

Fisher 3024C Diaphragm Actuator

Fisher 3024C Diaphragm Actuator Instruction Manual 3024C Actuator Fisher 3024C Diaphragm Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 3 Installation... 5 Mounting the Actuator on the Valve...

More information

3-port valves. pneumatically actuated

3-port valves. pneumatically actuated 3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive

More information

Fisher 3024C Diaphragm Actuator

Fisher 3024C Diaphragm Actuator 3024C Actuator Product Bulletin Fisher 3024C Diaphragm Actuator The 3024C actuator is a compact spring opposed pneumatic diaphragm actuator incorporating a cast yoke mounting and is suitable for general

More information

Python Series Control Valves

Python Series Control Valves s When accurate control is desired from your steam or water applications the Armstrong Python 1100 Series Control Valve will squeeze every bit of performance out of your system and deliver precise control.

More information

87/88 Pneumatic Multi-Spring Diaphragm Actuators

87/88 Pneumatic Multi-Spring Diaphragm Actuators GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced

More information

PN9400 Series. Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9400 Series. Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Page 1 of 5 TI-P328-01 CH Issue 1 PN9400 Series ISO 9001 Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Cert. No. LRQ 0963008 Description The PN9400 series actuators are a compact range

More information

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON

Python 1500 Series Control Valves. Pneumatic and Electric Actuators PYTHON Python 1500 Series Control Valves Pneumatic and Electric Actuators PYTHON - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing

More information

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...

More information

Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D

Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D Energy Conservation Environment Process Efficiency www.forbesmarshall.com

More information

DO/DC Midget Diaphragm Actuator

DO/DC Midget Diaphragm Actuator Type DO/DC Midget Diaphragm Actuator TABLE OF CONTENTS Page Product Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 Main Components and Materials - - - -

More information

Diaphragm Valves. Product information

Diaphragm Valves. Product information Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade

More information

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated

PYTHON 1500 SERIES CONTROL VALVES. Pneumatic and Electric Actuated PYTHON 1500 SERIES CONTROL VALVES Pneumatic and Electric Actuated Table of Contents Features and Benefits... 3 Specifications, Weights, and Dimensions... 4-5 Trim Options and CV Values... 6 Pneumatic Actuators...

More information

CONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.

CONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable. SINCE95 RB SERIES CONTROL CHOKE Unique. Precise. Quality. Reliable. RB SERIES CONTROL VALVES FEATURES Benefits The RB Series Control Valve features several unique design characteristics that minimize wear

More information

CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves

CE43 1 (DN25) to 4 (DN100) Carbon Steel Cage Design, Two Port Control Valves Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards

More information

Model DFR Valve Actuator

Model DFR Valve Actuator FEATURES Reliable Design The low-pressure diaphragm, fail-safe spring, and splined connection make for accurate and safe operation. Rugged Long Lasting Construction Dyna-Flo s expert CNC machining process

More information

Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241

Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241 Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure

More information

Series 110 Globe Control Valves

Series 110 Globe Control Valves Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in

More information

KNIFE GATE VALVES -- MODEL A

KNIFE GATE VALVES -- MODEL A PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat

More information

Heavy-Duty Pneumatic Actuator. IS & IC Series

Heavy-Duty Pneumatic Actuator. IS & IC Series Heavy-Duty Pneumatic Actuator BS EN ISO 9001:00 INTRODUCTION Heavy-Duty Pneumatic Actuator - The IS & IC series of Heavy Duty scotch yoke actuators are designed to suit a wide range of valves and damper

More information

Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241

Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241 Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure

More information

UNIDIRECTIONAL Knife Gate Valve

UNIDIRECTIONAL Knife Gate Valve 12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it

More information

Series 240 Pneumatic On-off Valve Type 3351

Series 240 Pneumatic On-off Valve Type 3351 Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.

Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards. VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60

More information

INSTRUCTION MANUAL. CVS P32 LP Gas Reducing Regulator

INSTRUCTION MANUAL. CVS P32 LP Gas Reducing Regulator INSTRUCTION MANUAL CVS P32 LP Gas Reducing Regulator The CVS Controls P32 Regulator is a non-relieving, pressure reducing regulator suitable for use in lower flow, LP gas applications (Natural Gas and

More information

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10 HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the

More information

Fisher 657 and 667 Diaphragm Actuators

Fisher 657 and 667 Diaphragm Actuators 657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner

More information

UNIDIRECTIONAL Gate Valve

UNIDIRECTIONAL Gate Valve 23/04/2013 UNIDIRECTIONAL Gate Valve Unidirectional flanged gate valve (bidirectional option to order), designed for high pressure applications, with self cleaning seal. Single piece die cast body with

More information

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or

More information

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS

VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of

More information

HELYON PRESSURE REDUCING VALVE MODEL M1

HELYON PRESSURE REDUCING VALVE MODEL M1 PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,

More information

CSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design

CSY SERIES. Pneumatic Rotary. Actuator. Double-Acting or Spring-Return Torques up to 2,500,000 in-lb Modular Design CSY SERIES Pneumatic Rotary Actuator Designed & engineered for severe-service applications Double-Acting or -Return Torques up to 2,500,000 in-lb Modular Design Design & Materials NAMUR Mounting Allows

More information

KNIFE GATE VALVES -- MODEL D

KNIFE GATE VALVES -- MODEL D PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

More information

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance

INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe

More information

Series 2200 and 2220 Control Valves

Series 2200 and 2220 Control Valves Series 2200 and 2220 Control Valves Space-Saving Solution: Yokeless design fits tight separator and scrubber applications Series 2200 Series 2220 Norriseal Series 2200 and 2220 control valves have been

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide

Fasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications

More information

CASH VALVES TYPE G-4 PRESSURE REGULATORS

CASH VALVES TYPE G-4 PRESSURE REGULATORS A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE 11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off

More information

Control Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring

Control Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring Change from one to two columns Data Sheet 10/138.29EN Rev. B Control Valve 23 / 24 Singleseat straightway valve with exchangeable seat ring Size DN 15... DN 100 With pneumatic actuator Verschiedene Gehäusewerkstoffe

More information

DBOY Series Pneumatic Control Valve

DBOY Series Pneumatic Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials

More information

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell

V January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low

More information

UNIDIRECTIONAL Round Guillotine Damper

UNIDIRECTIONAL Round Guillotine Damper 28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance

More information

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES

Mark 70 Series. Sliding Gate Control Valves. Pneumatic Control Valves Mark 70 Sliding Gate Control Valves MARK 70 FEATURES Mark 7 Series Sliding Gate Control Valves The MK7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of Jordan Valve s advanced

More information

Fisher eplug complete Rotary Control Valve and Actuator Package

Fisher eplug complete Rotary Control Valve and Actuator Package Product Bulletin D103196X012 eplug complete Fisher eplug complete Rotary Control Valve and Actuator Package...your complete control valve solution... simple...easy to select and install reliable...engineered

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging

More information

BOSS Series D Control Valve

BOSS Series D Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

HEAVY DUTY KNIFE GATE VALVE

HEAVY DUTY KNIFE GATE VALVE HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and

More information

CVS Rack and Pinion Pneumatic Actuator

CVS Rack and Pinion Pneumatic Actuator Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,

More information

Pressure reducing valves

Pressure reducing valves Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for

More information

Model DF269 Control Valves

Model DF269 Control Valves Features NACE Service Ready Standard construction for the DF269 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.

More information

SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"

SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½ to 8 SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes

More information

Pressure Reducing and Desuperheating Valves. Solutions for Steam Conditioning Applications.

Pressure Reducing and Desuperheating Valves. Solutions for Steam Conditioning Applications. Pressure Reducing and Desuperheating Valves Solutions for Steam Conditioning Applications Energy Conservation Environment Process Efficiency www.forbesmarshall.com Forbes Marshall Forbes Marshall Arca

More information

GLOBE 2 WAY CONTROL VALVE SERIES - 110

GLOBE 2 WAY CONTROL VALVE SERIES - 110 ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat

More information

P99 Pressure Reducing Regulator

P99 Pressure Reducing Regulator P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000

More information

UNIDIRECTIONAL Guillotine Valve

UNIDIRECTIONAL Guillotine Valve Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing

More information

WAFER STYLE KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on

More information

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Kunkle Models 91/218/228 liquid relief valves Safety and relief products Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from

More information

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Kunkle Models 91/218/228 liquid relief valves Safety and relief products Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from

More information

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve

T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes

More information

CVS Series 35, 50, 60, 70. Scotch Yoke Hydraulic Actuators. Introduction. Instruction Manual

CVS Series 35, 50, 60, 70. Scotch Yoke Hydraulic Actuators. Introduction. Instruction Manual Instruction Manual Figure 1: CVS Series 35 SRM100 Actuator CVS Series 35, 50, 60, 70 Scotch Yoke Hydraulic Actuators Introduction The CVS Hydraulic Actuator uses a scotch yoke mechanism to convert linear

More information

1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACUATORS

1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACUATORS 1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACUATORS ACA 0127-04/12-2 - 1-X-290 SERIES MULTISPRING PNEUMATIC DIAPHRAGM ACTUATORS 1-X-290 Series multispring pneumatic diaphragm actuators are designed

More information

KNIFE GATE VALVE Product Ref. : KG02W/KG02L

KNIFE GATE VALVE Product Ref. : KG02W/KG02L General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective

More information

MO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option

MO Declutchable Manual Override Gearbox EL-O-Matic F-Series Actuators option EFG.07.MO.EN, Page 1 of 2, Rev. 0 May 2018 MO Declutchable Manual Override Gearbox s option Light weight aluminum design and suitable for indoor and outdoor use. Easy operation. Suitable for quarter turn

More information

Type D2 FloPro Control Valve

Type D2 FloPro Control Valve Product Bulletin Type D2 FloPro Control Valve D2 FloPro Valve The Type D2 FloPro control valve (figure 1) is a compact, rugged valve designed for on-off control. This valve is ideal for use as a dump valve

More information

B Series 1/2" to 2" 2-Way and 3-Way Bronze Control Valves

B Series 1/2 to 2 2-Way and 3-Way Bronze Control Valves INSTALLATION AND MAINTENANCE INSTRUCTIONS IM-1-620-US November 2015 B Series 1/2" to 2" 2-Way and 3-Way Bronze Control Valves 1. Safety 2. Technical details 3. Installation and Commissioning 4. Maintenance

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port KEA, KFA and KLA Control Valves 1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

KTM PNEUMATIC ACTUATORS AW, AWN SERIES (FOR LARGE SIZED VALVES)

KTM PNEUMATIC ACTUATORS AW, AWN SERIES (FOR LARGE SIZED VALVES) Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines FEATURES Scotch yoke construction ideal for large sized valves Two pistons in double

More information

BIDIRECTIONAL WAFER Knife Gate Valve

BIDIRECTIONAL WAFER Knife Gate Valve 09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with

More information

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging

More information

Scotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.

Scotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process. The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934

More information

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell 786.89 January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL 8900 Previously manufactured by Dezurik and Honeywell Description: The Nor East Series 8600 (mixing) and Series 8900 (diverting) cage

More information

Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve

Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials

More information

Series VC Pneumatic cylinder actuators

Series VC Pneumatic cylinder actuators Series VC Pneumatic cylinder actuators Metso`s Neles series VC actuators are exclusively developed for linear valves. The VC double acting cylinder type actuators are designed for use in both modulating

More information

SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves

SPIRA-TROL 1/2 to 4 ANSI Two-port LEA, LFA and LLA Control Valves 1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in

More information

PNEUMATIC ON OFF GLOBE VALVE

PNEUMATIC ON OFF GLOBE VALVE PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:

More information

Type Pneumatic Control Valve Type 3525 Globe Valve

Type Pneumatic Control Valve Type 3525 Globe Valve Type 355-1 Pneumatic Control Valve Type 355 Globe Valve Application Dump valve designed for use in high-pressure on/off applications in upstream oil and gas production. Valve size NPS 1 to 3 Pressure rating

More information

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series

Butterfly Valves T5 (Wafer) and T6 (Lugged) Series Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer

More information

Python Series Control Valves

Python Series Control Valves Python - 1500 Series Control Valves Control valves are a key component in any pressure or temperature control application. With the increasing cost of fuel, delivering media in the most efficient way increases

More information

D 25 POLYPROPYLENE (BOLTED)

D 25 POLYPROPYLENE (BOLTED) www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start

More information

37/38 Pneumatic Spring Diaphragm Actuator

37/38 Pneumatic Spring Diaphragm Actuator GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use

More information

Iron Horse ED Series Pressure Regulator

Iron Horse ED Series Pressure Regulator REGULATORS Applications Pressure Regulation for Steam Distribution Single Point or Multiple Use Applications Pressure Control for Steam Plants District Heating Systems Single Stage Reduction Stations Two

More information