ERGONOMIC FEATURES & BENEFITS

Transcription

1 divider Seating Actin Lite-Lift Altona Locate Amira M-Task Annapolis Minto Archer MVL File Buddy Ashmont Nemo Avro Newcastle Beta Otto Bolt Overtime Brighton Overtime Caman Pacer Capra Pacific Centro Part-Time Cobalt Retro Craft Safari Dakota Six Danio Six Dash Soda Dori Stacklite Format Stradic Full-Time Tami Gennex Thompson Geo Toma Granby Tumi Harvest Ultra Humber Valan Ibex Vanier Java Vos Kazan Woodbridge Keno Yoho Kylie

2 ERGONOMIC FEATURES & BENEFITS EACH GLOBAL CHAIR IS BUILT WITH FEATURES THAT ARE ERGONOMICALLY DESIGNED TO PROMOTE GOOD POSTURE AND PROVIDE MAXIMUM COMFORT. WHILE FULLY SUPPORTING YOUR BODY, THESE FEATURES SHOULD ALSO ALLOW YOU TO ADJUST YOUR CHAIR TO FIT YOU. A TENSION ADJUSTMENT Increase or decrease to match body weight. Allows you to rock comfortably, without heavy pushing, reducing muscle fatigue. L SYNCHRO-TILT MOVEMENT Backrest reclines at a faster rate than the seat, increasing the angle between your torso and thighs. Enhances comfort and encourages dynamic body movement. B CHAIR TILT LOCK Lock the tilt movement in position(s) to accommodate your working posture. Allows you to lock your chair in a comfortable and supportive position. (Can be either single position, multiple position or infinite position.) M WATERFALL SEAT EDGE Reduces pressure at the back of your knees, contributing to good blood flow. C SEAT HEIGHT Raise or lower to allow your feet to rest flat on the floor. Avoids pressure under your thighs, easing blood flow. N CONTOURED CUSHION Supports the body effectively, allowing you to sit longer without discomfort. D BACK/LUMBAR HEIGHT ADJUSTMENT Raise or lower to position lumbar support in your lumbar area. Reduces likelihood of back pain. P VIBRATING SEAT & BACK Soothing effect contributes to your relaxation during work breaks. E SEAT DEPTH Change the depth of the seat to accommodate the length of your thighs. Keeps your back in contact with the backrest while avoiding pressure behind your knees. Can be sliding (MD) or manual. Q WIDTH ADJUSTABLE ARMS Allows outward movement of armrests to match shoulder breadth. Ensures armrests properly support forearms, reducing muscular efforts in neck and shoulders. F SEAT ANGLE ADJUSTMENT Allows chair to tilt forward changing the angle of your thighs in relation to the floor. Helps reduce disc pressure during forward leaning tasks. top view R ARM ROTATION Rotate armcaps to support your forearms in various positions. Reduces muscular effort in neck and shoulders minimizing risk of pain. G BACK ANGLE ADJUSTMENT Adjust to change the angle of your torso in relation to your thighs. Helps reduce disc pressure and relaxes your back muscles. S CENTER TILT Chair tilts from a pivot point under the center of the seat allowing you to rock. When your feet are well supported, blood flow is enhanced. H ARM HEIGHT Raise or lower to support your forearms. Reduces muscular effort in neck and shoulders, minimizing risk of pain. U SOFT DESCENT PNEUMATIC LIFT Gently and gradually lowering the seat helps you easily select proper seat height without causing a jerking motion. J KNEE-TILT MOVEMENT Chair tilts from a pivot point at the front of the seat, keeping your feet on the floor as you rock. Maintains stability. V LUMBAR DEPTH ADJUSTMENT Increase or decrease curvature of the back to match the profile of your lower back. Enhances comfort and support in the lower lumbar area. MAXIMIZING YOUR ERGONOMIC SEATING Always select a chair that is designed for the type of work you perform and make certain the chair is comfortable for the length of time spent using it. Ensure that the seat and back cushions are contoured to fit your body, which will help eliminate pressure points. An ergonomically designed chair should allow changing positions easily. As you work, reposition yourself throughout the day to reduce strain and stress on specific muscle groups. If you change job functions, adjust your chair to fit the new task. Proper ergonomic seating should help eliminate many of the work related injuries that result from poor posture and poorly designed chairs. 8 officestogocanada.com

3 MECHANISM ADJUSTMENTS TASK POSTURE TASK NOTES * Select models only. ** Ratchet back height adjustment on select models. Mechanisms shown are generic depictions and may differ from one chair to another. ADJUSTMENTS (2) Pneumatic seat height (8) Manual seat depth Back/lumbar height ** Swivel ADJUSTMENTS (2) Pneumatic seat height (3) Back angle (6) Back/lumbar height ** Seat depth * Swivel TILTER MULTI-TILTER ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (9) Multiple position tilt lock * Center tilt action Swivel ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (3) Back angle adjustment (4) Seat angle (8) Sliding seat depth adjustment (MD) (9) Infinite position tilt lock Back/lumbar height ** Center tilt action Swivel SYNCHRO-TILTER OPERATOR ADJUSTMENTS (1) Tilt tension (2) Pneumatic seat height (9) Multiple position tilt lock/ synchro tilt action Anti kick back Back/lumbar height ** Swivel ADJUSTMENTS (2) Pneumatic seat height (3) Back angle *(free float/lock) (4) Seat angle *(free float/lock) Back/lumbar height ** With single lever operator mechanism, seat and back angle are controlled using lever 4 * Swivel officestogocanada.com 9

4 A ACTIN / ACTIN ACTIN Value priced multi-tilter. Fully upholstered seat and back. Standard with height adjustable arms. Dual wheel carpet casters (C65) are standard. Upholstered in Black Quilt (QL10) only. SEATING Multi-tilter mechanism with infinite position tilt lock. Tilt tension adjustment. Independent back and seat angle adjustment. Seat depth adjustment. Ratchet back height adjustment. model OTG11950B (C65R). Add $76/set. OTG11950B 425 Black Quilt fabric IN Medium Back Multi-Tilter MM Unit weight: 47 LB 21.4 KG Carton weight: 53 LB KG Carton volume: 7.5 FT³ 0.21 MT³ A, B, C, D, E, G, H, M, N, S ALTONA Altona offers comfort and generous proportions at an affordable price. Durable nylon arms are standard. Dual wheel carpet casters (C65) are standard. OTG11615B is upholstered in Black Quilt (QL10). OTG11616B seating surfaces are upholstered in Black (PU30/BL20). Tilter mechanism with upright tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11616B OTG11615B 269 Black Quilt fabric OTG11616B 285 Black Luxhide leather IN High Back Tilter MM Unit weight: 32 LB 14.5 KG Carton weight: 37 LB KG Carton volume: 4.56 FT³ 0.12 MT³ A, B, C, M, N, S 10 officestogocanada.com

5 SEATING AMIRA Mesh back and upholstered seat tilter chair. Soft scultpted frame design. Fixed loop arms. Black base with dual wheel carpet casters (C65) is standard. Seat can be upholstered in Black polyester with Black mesh back (BLK) or in Blue polyester with Blue/Grey mesh back (BLU). Center tilt with upright position tilt lock. Tilt tension adjustment. AMIRA A (C65R). Add $76/set. model OTG13020 OTG IN Medium Mesh Back Tilter MM Unit weight: 26 LB 11.8 KG Carton weight: 31 LB KG Carton volume: 4.6 FT³ 0.13 MT³ A, B, C, M, N, S officestogocanada.com 11

6 A ANNAPOLIS ANNAPOLIS model MVL2732 Simple function, great price. Canadian made. Durable nylon arms are standard. Dual wheel carpet casters (C65) are standard. MVL2732 and MVL seating surfaces can be upholstered in, in various colors (see page 119). MVL2733 and MVL can be upholstered in all Global grade 1 seating textiles (see page 119). SEATING Tilter mechanism with upright tilt lock. Tilt tension adjustment. (C65R). Add $16/set MVL IN High Back Tilter - Assembled MM Unit weight: 36 LB 16.4 KG Carton weight: 40 LB KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL IN High Back Tilter - Condensed Packaging MM Unit weight: 36 LB 16.4 KG Carton weight: 40 LB KG Carton volume: 6 FT³ 0.16 MT³ A, B, C, M, N, S MVL IN High Back Tilter - Assembled MM Unit weight: 36 LB 16.4 KG Carton weight: 40 LB KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL IN High Back Tilter - Condensed Packaging MM Unit weight: 36 LB 16.4 KG Carton weight: 40 LB KG Carton volume: 6 FT³ 0.16 MT³ A, B, C, M, N, S 12 officestogocanada.com

7 SEATING ARCHER A ARCHER model MVL3161F Canadian made. Upholstered seat and polyamide patterned mesh back. Standard with height and width adjustable arms with soft self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Mesh back can be upholstered in Black (MT70), Blackberry (MT74), Chestnut (MT75), Navy (MT72), Red (MT71) and Toffee (MT73). MVL3161 seat can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL3161F seat can be upholstered in all Global grade 1 seating textiles (see page 119). Synchro tilt mechanism with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. MVL MVL3161F 536 IN Synchro-Tilter, Mesh High Back and Uph Seat MM Unit weight: 41 LB 18.6 KG Carton weight: 53 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, L, M, N, Q officestogocanada.com 13

8 A ASHMONT SEATING ASHMONT model MVL2780 model MVL2782 Canadian made. Soft deep cushions on seat and back offer plush comfort. Management chairs: Height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Guest chairs: Upholstered armcaps, oval steel tube frame and sled base. Dual wheel carpet casters (C65) are standard (except guest chairs). MVL2780, MVL2781 and MVL2782 seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL2780F, MVL2781F and MVL2782F can be upholstered in all Global grade 1 seating textiles (see page 119). MANAGEMENT Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set MVL MVL2780F 566 IN HB Management Tilter w/height Adjustable Arms MM Unit weight: 50 LB 22.7 KG Carton weight: 55 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, M, N, S MVL MVL2781F 537 IN MB Management Tilter w/height Adjustable Arms MM Unit weight: 47 LB 21.4 KG Carton weight: 52 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, H, M, N, S MVL Black Luxhide leather MVL2782F 403 IN MB Guest Chair - Sled Base MM Unit weight: 33 LB 15 KG Carton weight: 38 LB KG Carton volume: 8.5 FT³ 0.24 MT³ M, N 14 officestogocanada.com

9 SEATING AVRO A AVRO model MVL3101 model MVL3114 model MVL3123 model MVL3107 Avro features improved ergonomics, custom support and a steamlined profile the perfect balance between functionality and style. Ergonomic seating, Canadian made. Available with five different mechanism options: synchro-tilter, multi-tilter, tilter, task and weight sensing synchro-tilter. (Drafting chairs with task mechanism only.) Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C1) are standard on all models. Mesh back and mesh seat models can only be upholstered in Black mesh (MS69). Mesh back and upholstered seat models: Mesh back is available in Black (MS69), Natural (MS74) and Stone (MS71). Seats can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. (C9R). Add $16/set. For optional polished aluminum base, please specify (ALU). Add $105. For optional height and width adjustable T-arms with sliding, articulating armcaps, please specify (G1). Add $57. Synchro-tilter chairs - Synchro tilt with multi position tilt lock. - Tilt tension adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Multi-tilter chairs - Infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustment. - Side activated sliding seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Tilter chairs - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Task chairs - Manual bolt seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Weight sensing synchro-tilter chairs - Synchro tilt with multi position tilt lock. - Automatic tilt tension adjustment. - Side activated sliding seat depth adjustment. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. Drafting chairs - Task mechanism. - Height and depth adjustable lumbar support. - Pneumatic seat height adjustment. - Height adjustable Chrome footrest. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL MVL3101F 573 IN Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 51 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, V MVL MVL3103F 618 IN Multi-Tilter, Mesh Back and Uph Seat MM Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D F, G, H, M, N, S, V officestogocanada.com 15

10 A AVRO SEATING MVL MVL3104F 551 IN Tilter, Mesh Back and Uph Seat MM Unit weight: 36 LB 16.4 KG Carton weight: 45 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, N, S, V MVL MVL3106F 510 IN Task, Mesh Back and Uph Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N, V MVL MVL3107F 596 IN Armless Drafting, Mesh Back and Uph Seat MM Unit weight: 30 LB 13.6 KG Carton weight: 39 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N, V MVL MVL3108F 675 IN Weight Sensing Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 51 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, N, V MVL MVL3109F 653 IN Drafting w/arms, Mesh Back and Uph Seat MM Unit weight: 36 LB 16.4 KG Carton weight: 45 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N, V 16 officestogocanada.com

11 SEATING AVRO A MVL MVL3111F 639 IN Synchro-Tilter, Uph Back and Seat MM Unit weight: 43 LB 19.5 KG Carton weight: 52 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, V MVL MVL3113F 685 IN Multi-Tilter, Uph Back and Seat MM Unit weight: 48 LB 21.8 KG Carton weight: 57 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, N, S, V MVL MVL3114F 618 IN Tilter, Uph Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, N, S, V MVL MVL3116F 576 IN Task, Uph Back and Seat MM Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N, V MVL MVL3117F 663 IN Armless Drafting, Uph Back and Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N, V officestogocanada.com 17

12 A AVRO SEATING MVL MVL3118F 741 OVERALL DIMENSIONS W D H IN 26 Weight Sensing Synchro-Tilter, Uph Back and Seat MM 660 Unit weight: 43 LB 19.5 KG Carton weight: 52 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, N, V MVL3119F 720 IN Drafting w/arms, Uph Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N, V BACK DIMENSIONS W H SEAT DIMENSIONS W D H BACK DIMENSIONS W H OVERALL DIMENSIONS W D H IN 26 Multi-Tilter, Mesh Back and Seat MM 660 Unit weight: 48 LB 21.8 KG Carton weight: 57 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, S, V SEAT DIMENSIONS W D H BACK DIMENSIONS W H OVERALL DIMENSIONS W D H IN Tilter, Mesh Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, M, S, V 18 SEAT DIMENSIONS W D H MVL3124 Black mesh OVERALL DIMENSIONS W D H IN Synchro-Tilter, Mesh Back and Seat MM Unit weight: 43 LB 19.5 KG Carton weight: 52 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, V MVL3123 Black mesh OVERALL DIMENSIONS W D H MVL3121 Black mesh BACK DIMENSIONS W H MVL SEAT DIMENSIONS W D H SEAT DIMENSIONS W D H BACK DIMENSIONS W H officestogocanada.com

13 SEATING AVRO A MVL Black mesh IN Task, Mesh Back and Seat MM Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, V MVL Black mesh IN Armless Drafting, Mesh Back and Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, V MVL Black mesh IN Weight Sensing Synchro-Tilter, Mesh Back and Seat MM Unit weight: 43 LB 19.5 KG Carton weight: 52 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, L, M, V MVL Black mesh IN Drafting w/arms, Mesh Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, V officestogocanada.com 19

14 B BETA SEATING BETA model MVL2729 model MVL2718 Posture task chairs. Canadian made. Generous size seat and back, fully upholstered. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Drafting chairs are equipped with a height adjustable Chrome footrest. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Infinite back angle and back height adjustment. (C65R). Add $16/set. MVL IN Armless Posture Task Drafting MM Unit weight: 41 LB 18.6 KG Carton weight: 46 LB KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, M, N MVL IN Posture Task Drafting w/arms MM Unit weight: 46 LB 20.9 KG Carton weight: 51 LB KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, H, M, N MVL IN Armless Posture Task MM Unit weight: 27 LB 12.3 KG Carton weight: 31 LB KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, G, M, N MVL IN Posture Task w/arms MM Unit weight: 33 LB 15 KG Carton weight: 38 LB KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, G, H, M, N 20 officestogocanada.com

15 SEATING BETA / BOLT / BRIGHTON B MVL IN Height Adjustable T-Arms - 1 pair MM Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) BOLT model OTG11510B Value priced mesh seating. Breathable mesh back. Scuff resistant arched base. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Only available in a Black mesh fabric seat (MS20) with a Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11510B 368 IN Tilter, Mesh Back MM Unit weight: 30 LB 13.6 KG Carton weight: 36 LB KG Carton volume: 4.6 FT³ 0.13 MT³ A, B, C, H, M, N, S BRIGHTON model MVL2787 High back management chair. High comfort design, Canadian made. Contoured seat and back with integrated headrest. Black arms and base. Loop arms with upholstered armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL IN High Back Tilter MM Unit weight: 42 LB 19.1 KG Carton weight: 54 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, M, N, S officestogocanada.com 21

16 C CAMAN SEATING CAMAN model MVL11886 model MVL11888 Canadian made. Welded steel frame in Black finish. Fixed arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard (except guest chairs). MVL11886, MVL11887 and MVL11888 seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). MVL11886F, MVL11887F and MVL11888F can be upholstered in all Global grade 1 seating textiles (see page 119). TILTER Center tilt with upright position tilt lock Tilt tension adjustment. (C65R). Add $16/set. MVL MVL11886F 400 IN High Back Tilter MM Unit weight: 31 LB 14.1 KG Carton weight: 35 LB KG Carton volume: FT³ 0.57 MT³ A, B, C, M, N, S 2 per carton MVL MVL11887F 389 IN Medium Back Tilter MM Unit weight: 31 LB 14.1 KG Carton weight: 35 LB KG Carton volume: FT³ 0.57 MT³ A, B, C, M, N, S 2 per carton MVL MVL11888F 336 IN Medium Back Guest Chair - Sled Base MM Unit weight: 23 LB 10.5 KG Carton weight: 27 LB KG Carton volume: FT³ 0.57 MT³ M, N 2 per carton 22 officestogocanada.com

17 SEATING CAPRA / CENTRO C CAPRA General purpose guest chair. Chrome oval tube four-legged frame. Contoured seat cushion with waterfall edge. Perforated polypropylene back with Black air mesh fabric seat. Nylon arms. Stackable up to 4 high. model OTG11740B OTG11740B 276 IN Plastic Back Guest Chair Stacks 4 high. MM Unit weight: 20 LB 9.1 KG Carton weight: 27 LB KG Carton volume: FT³ 0.41 MT³ M, N 2 per carton CENTRO Multi-purpose guest chair. Durable oval steel four-legged frame. Contoured back and seat cushions with waterfall seat edge. Upholstered armcaps. Seating surfaces are upholstered in Black. model OTG3915 OTG IN Guest Chair MM Unit weight: 26 LB 11.8 KG Carton weight: 30 LB KG Carton volume: 6.25 FT³ 0.17 MT³ M, N officestogocanada.com 23

18 C COBALT SEATING COBALT model MVL2785 General purpose medium back tilter. Canadian made. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. MVL2785 seating surfaces can be upholstered in, in various colors (see page 119). MVL2785F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL MVL2785F 360 IN Medium Back Tilter MM Unit weight: 35 LB 15.9 KG Carton weight: 40 LB KG Carton volume: 5.5 FT³ 0.15 MT³ A, B, C, H, M, N, S 24 officestogocanada.com

19 SEATING CRAFT C CRAFT Craft is a modular lounge seating series that is easy to configure, durable and ideal for open spaces. Modular non-handed components, can be reconfigured to suit your space. Curve-120 degree units can create 3-way and collaborative pod configurations. Cushions are fully upholstered and mounted on 1.5 high nylon glides. Can be upholstered in all Global grade 1 seating textiles and in (see page 119). For dual wheel carpet casters, please specify (C107). Add $35. (C107R). Add $50. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. Sample layout Two square units, three rectangle units, three curve-120 degree units 3-way layout Three curve-120 degree units Collaborative pod layout Six curve-120 degree units MVL IN Curve-120 Degree Unit MM Unit weight: 37 LB 16.8 KG Carton weight: 49 LB KG Carton volume: FT³ 0.37 MT³ MVL IN Rectangle Unit MM Unit weight: 37 LB 16.8 KG Carton weight: 47 LB KG Carton volume: 9.5 FT³ 0.26 MT³ MVL IN Square Unit MM Unit weight: 22 LB 10 KG Carton weight: 28 LB 12.7 KG Carton volume: 5.25 FT³ 0.14 MT³ officestogocanada.com 25

20 D DAKOTA / DANIO SEATING DAKOTA Wood frame guest chair Four-legged, slat back design. Wood frame is available in Cordovan color only. Seat is fully upholstered in Black Luxhide bonded leather. Shipped knocked down (KD) - some assembly required. model OTG11820B OTG11820B 347 IN Wood Frame Guest Chair MM Unit weight: 19 LB 8.6 KG Carton weight: 28 LB 12.7 KG Carton volume: 4.5 FT³ 0.12 MT³ M, N DANIO model MVL2720 model MVL2725 Canadian made task chairs. Hinged auto-adjust back with scuff resistant outer shroud. Thick foam and decorative stitch details. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Drafting chair is equipped with a height adjustable Chrome footrest. Dual wheel carpet casters (C65) are standard. MVL2724 and MVL2725 seaing surfaces can be upholstered in, in various colors (see page 119). MVL2720, MVL2721 and MVL2723 can be upholstered in all Global grade 1 seating textiles (see page 119). Height adjustable back. Seat depth adjustment. (C65R). Add $16/set. MVL IN Armless Task MM Unit weight: 21 LB 9.5 KG Carton weight: 24 LB KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, E, M, N MVL IN Task w/arms MM Unit weight: 33 LB 15 KG Carton weight: 36 LB KG Carton volume: 5.75 FT³ 0.16 MT³ C, D, E, H, M, N 26 officestogocanada.com

21 SEATING DANIO D MVL IN Armless Drafting Task MM Unit weight: 33 LB 15 KG Carton weight: 37 LB KG Carton volume: 6.75 FT³ 0.19 MT³ C, D, E, M, N MVL IN Armless Task MM Unit weight: 21 LB 9.5 KG Carton weight: 24 LB KG Carton volume: 4.9 FT³ 0.13 MT³ C, D, E, M, N MVL IN Task w/arms MM Unit weight: 27 LB 12.3 KG Carton weight: 30 LB KG Carton volume: 5.5 FT³ 0.15 MT³ C, D, E, H, M, N MVL IN Height Adjustable T-Arms - 1 pair MM Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) officestogocanada.com 27

22 D DASH / DORI SEATING DASH Multi-purpose guest/occasional chair. Durable welded four-legged steel frame. Black mesh back with Black air mesh fabric seat. Nylon armcaps. Generous proportions. Shipped knocked down (KD) - easy to assemble. model OTG11760B OTG11760B 236 IN Guest Chair, Mesh Back and Uph Seat MM Unit weight: 21 LB 9.5 KG Carton weight: 26 LB KG Carton volume: 3.9 FT³ 0.11 MT³ M, N DORI Multi-purpose stacking chairs. Strong welded steel frame in Chrome finish. Durable and easy to clean polypropylene back and seat. Available in Black only. Armchair has fiberglass reinforced polypropylene arms. Stackable up to 5 high on floor. Shipped fully assembled. model OTG1210BK OTG1210BK 156 IN Stacking Armchair Stacks 5 high. MM Unit weight: 11 LB 5 KG Carton weight: 12.5 LB 5.67 KG Carton volume: 12 FT³ 0.33 MT³ 4 per carton (pricing and specifications are for one chair) OTG1211BK 138 IN Armless Stacking Chair Stacks 5 high. MM Unit weight: 9 LB 4.1 KG Carton weight: 10 LB 4.54 KG Carton volume: 10.5 FT³ 0.29 MT³ 4 per carton (pricing and specifications are for one chair) 28 officestogocanada.com

23 SEATING FORMAT F FORMAT model MVL3191F model MVL3192F Synchro-tilter chairs with mesh back and upholstered seat. Canadian made. Standard with height and width adjustable arms with soft self-skinned urethane (SSU) armcaps that slide forward and backward. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. MVL3191 and MVL3192 seating surface can be upholstered in, in various colors (see page 119). MVL3191F and MVL3192F seat can be upholstered in all Global grade 1 seating textiles (see page 119). MVL3192 and MVL3192F feature an adjustable headrest which tilts and moves up and down to fit comfortably into the curve of the neck. Synchro tilt with upright position tilt lock. Tilt tension adjustment. Ratchet back height and headrest adjustment. (C9R). Add $16/set. MVL MVL3191F 495 IN High Back Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 43 LB 19.5 KG Carton weight: 54 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, Q MVL MVL3192F 550 IN High Back Synchro-Tilter w/headrest, Mesh Back and Uph Seat MM Unit weight: 45 LB 20.5 KG Carton weight: 56 LB 25.4 KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, H, L, M, N, Q MVL IN Headrest for Format Chairs Easily attaches to MVL3191. MM Unit weight: 1 LB 0.5 KG Carton weight: 2 LB 0.91 KG Available in Black mesh only. Carton volume: 0.5 FT³ 0.01 MT³ officestogocanada.com 29

24 F FULL-TIME SEATING FULL-TIME model MVL2900 Canadian made, ergonomic seating. Extra thick seat foam and contoured back. Standard with height and width adjustable arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Multi-tilter with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Back height adjustment. (C65R). Add $16/set. For optional sliding seat depth adjustment, please specify (MD). Add $26. MVL IN Medium Back Multi-Tilter MM Unit weight: 50 LB 22.7 KG Carton weight: 56 LB 25.4 KG Carton volume: 9.75 FT³ 0.27 MT³ A, B, C, D, F, G, H, M, N, Q 30 officestogocanada.com

25 SEATING GENNEX G GENNEX model OTG11340 model OTG11341 Multi-purpose guest/nesting chairs feature a flip up seat allowing chairs to stack horizontally. Durable Black steel frame. Black mesh back. Models with arms or without arms are available. Armchair features Black polyurethane armcaps. Dual wheel carpet casters are standard. Seat can be upholstered in all Global grade 1 seating textiles or in (see page 119). (C9R). Add $61/set. OTG IN Nesting Guest Armchair w/casters, Mesh Back and Uph Seat MM Unit weight: 24 LB 10.9 KG Carton weight: 29 LB KG Carton volume: FT³ 0.44 MT³ M, N 2 per carton OTG IN Armless Nesting Guest Chair w/casters, Mesh Back and Uph Seat MM Unit weight: 21 LB 9.5 KG Carton weight: 25.5 LB KG Carton volume: FT³ 0.37 MT³ M, N 2 per carton officestogocanada.com 31

26 G GEO GEO model OTG11640B Value priced, quality mesh seating. Scuff resistant arched base. Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps (except armless and tilter chairs). Tilter chair features fixed loop style polypropylene arms. Dual wheel carpet casters (C65) are standard. All models have a Black mesh back. OTG11636B, OTG11641B, OTG11642B and OTG11678B: Seat is upholstered in Black mesh fabric (MS20). OTG11640B seating surface is upholstered in Black (PU30/BL20). SEATING Tilter chair - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Pneumatic seat height adjustment. Synchro-tilter chair - Synchro tilt with upright position tilt lock. - Tilt tension adjustment. - Pneumatic seat height adjustment. Task chair - Task mechanism. - Pneumatic seat height adjustment. Drafting chair - Task mechanism. - Height adjustable Chrome footrest. - Pneumatic seat height adjustment.. (C65R). Add $76/set. OTG11636B 296 Black mesh fabric IN Low Back Tilter, Mesh Back and Uph Seat MM Unit weight: 26 LB 11.8 KG Carton weight: 30 LB KG Carton volume: 3.75 FT³ 0.1 MT³ A, B, C, M, N, S OTG11641B 463 Black mesh fabric IN High Back Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 38 LB 17.3 KG Carton weight: 43 LB 19.5 KG Carton volume: 4.75 FT³ 0.13 MT³ A, B, C, H, L, M, N OTG11642B 250 Black mesh fabric IN Low Back Armless Task, Mesh Back and Uph Seat MM Unit weight: 25 LB 11.4 KG Carton weight: 30 LB KG Carton volume: 3.75 FT³ 0.1 MT³ C, M, N OTG11678B 457 Black mesh fabric IN Low Back Drafting Task, Mesh Back and Uph Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 42 LB KG Carton volume: 6 FT³ 0.16 MT³ C, H, M, N 32 officestogocanada.com

27 SEATING GEO / GRANBY G MVL IN Height Adjustable Arms for OTG11642B - 1 pair MM Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) GRANBY Mesh back synchro-tilter chair. Polished aluminum base, Black frame and Chrome accents. Standard with height adjustable arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Air-flow Black mesh back. Seat is upholstered in Black Quilt (QL10). Synchro tilt with multi-position tilt lock. Tilt tension adjustment. Height adjustable lumbar support. (C9R). Add $76/set. model OTG10904 OTG Black Quilt IN High Back Synchro-Tilter MM Unit weight: 36 LB 16.4 KG Carton weight: 40 LB KG Carton volume: 4.5 FT³ 0.12 MT³ A, B, C, D, H, L, M, N officestogocanada.com 33

28 H HARVEST / HUMBER SEATING HARVEST model MVL2705 Wood frame guest chairs with fully upholstered cushions. Canadian made. MVL2705 seating surfaces can be upholstered in, in various colors (see page 119). MVL2705F can be upholstered in all Global grade 1 seating textiles (see page 119). Wood frame is available in three finishes: Dark Cherry (DCM), Mahogany (EMM) and Natural Cherry (NCM). Shipped fully assembled. MVL MVL2705F 433 IN Guest Armchair MM Unit weight: 21 LB 9.5 KG Carton weight: 25 LB KG Carton volume: FT³ 0.33 MT³ M, N HUMBER model MVL2788 High back management chair. Canadian made. Double stitch details on seat and back. Comfortable and durable fixed loop polyurethane arms. Dual wheel carpet casters (C65) are standard. MVL2788 seating surfaces can be upholstered in polyurethane mock leather, in various colors (see page 119). MVL2788F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL Polyurethane mock leather MVL2788F 445 IN High Back Tilter MM Unit weight: 38 LB 17.3 KG Carton weight: 44 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, M, N, S 34 officestogocanada.com

29 SEATING IBEX I IBEX model MVL2801 model MVL2807F model MVL2814F model MVL2809F Ergonomic mesh seating designed to promote good posture and provide maximum comfort. Designed by Zooey Ch Canadian made. Available with four different mechanism options: synchro-tilter, multi-tilter, tilter and task. Drafting chairs with task mechanism only. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps (except armless and guest chairs). Dual wheel carpet casters (C1) are standard (except four-legged guest chairs). Guest chairs have polymer armcaps (except armless models), a welded steel wall saver frame and are shipped fully assembled. Mesh back and mesh seat models can only be upholstered in Black mesh (MS69). Mesh back and upholstered seat models: Mesh back is available in Black (MS69) only and seating surface can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. (C9R). Add $16/set. For optional sliding seat depth adjustment on multi-tilter chairs, please specify (MD). Add $26. Synchro-tilter chairs - Synchro tilt with multi-position tilt lock. - Tilt tension adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Multi-tilter chairs - Infinite position tilt lock. - Tilt tension adjustment. - Infinite back and seat angle adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Tilter chairs - Center tilt with upright position tilt lock. - Tilt tension adjustment. - Seat depth adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Task chairs - Seat depth adjustment. - Adjustable lumbar support. - Pneumatic seat height adjustment. Drafting chairs - Task mechanism. - Adjustable lumbar support. - Pneumatic seat height adjustment. - Height adjustable Chrome footrest. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL MVL2801F 512 IN Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 51 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N MVL MVL2803F 560 IN Multi-Tilter, Mesh Back and Uph Seat MM Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, S officestogocanada.com 35

30 I IBEX SEATING MVL MVL2804F 490 IN Tilter, Mesh Back and Uph Seat MM Unit weight: 40 LB 18.2 KG Carton weight: 49 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, N, S MVL MVL2806F 446 IN Task, Mesh Back and Uph Seat MM Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N MVL MVL2807F 511 IN Armless Drafting, Mesh Back and Uph Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N MVL MVL2808F 597 IN Drafting w/arms, Mesh Back and Uph Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N MVL MVL2809F 377 IN Guest Chair, Mesh Back and Uph Seat Stacks 5 high. MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: 13.5 FT³ 0.38 MT³ M, N 36 officestogocanada.com

31 SEATING IBEX I MVL2809C 456 MVL2809CF 456 IN Guest Chair w/casters, Mesh Back and Uph Seat MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL MVL2811F 582 IN Synchro-Tilter, Uph Back and Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 51 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N MVL MVL2813F 630 IN Multi-Tilter, Uph Back and Seat MM Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, S MVL MVL2814F 559 IN Tilter, Uph Back and Seat MM Unit weight: 40 LB 18.2 KG Carton weight: 49 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, N, S MVL MVL2816F 516 IN Task, Uph Back and Seat MM Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M, N officestogocanada.com 37

32 I IBEX SEATING MVL MVL2817F 580 IN Armless Drafting, Uph Back and Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M, N MVL MVL2818F 665 IN Drafting w/arms, Uph Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M, N MVL MVL2819F 443 Stacks 5 high. Back exterior upholstered IN Guest Chair, Uph Back and Seat in Jenny, Ebony (JN02). MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL2819C 519 MVL2819CF 519 Back exterior upholstered IN Guest Chair w/casters, Uph Back and Seat in Jenny, Ebony (JN02). MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: 13.5 FT³ 0.38 MT³ M, N MVL Black mesh IN Synchro-Tilter, Mesh Back and Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 51 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M 38 officestogocanada.com

33 IBEX I SEATING MVL2823 Black mesh 657 OVERALL DIMENSIONS W D H IN Multi-Tilter, Mesh Back and Seat MM Unit weight: 47 LB 21.4 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, S MVL2824 Black mesh OVERALL DIMENSIONS W D H BACK DIMENSIONS W H SEAT DIMENSIONS W D H BACK DIMENSIONS W H OVERALL DIMENSIONS W D H IN Armless Drafting, Mesh Back and Seat MM Unit weight: 31 LB 14.1 KG Carton weight: 40 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, M SEAT DIMENSIONS W D H BACK DIMENSIONS W H OVERALL DIMENSIONS W D H IN Drafting w/arms, Mesh Back and Seat MM Unit weight: 37 LB 16.8 KG Carton weight: 46 LB KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, H, M officestogocanada.com SEAT DIMENSIONS W D H 545 IN MVL2828 Black mesh Task, Mesh Back and Seat MM Unit weight: 32 LB 14.5 KG Carton weight: 41 LB 18.6 KG Carton volume: 10.5 FT³ 0.29 MT³ C, D, E, H, M MVL2827 Black mesh OVERALL DIMENSIONS W D H IN Tilter, Mesh Back and Seat MM Unit weight: 40 LB 18.2 KG Carton weight: 49 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, H, M, S MVL2826 Black mesh BACK DIMENSIONS W H SEAT DIMENSIONS W D H SEAT DIMENSIONS W D H BACK DIMENSIONS W H

34 I IBEX SEATING MVL MVL2831F 351 IN Armless Guest Chair, Mesh Back and Uph Seat Stacks 5 high. MM Unit weight: 19 LB 8.6 KG Carton weight: 25 LB KG Carton volume: FT³ 0.33 MT³ M, N MVL2831C 431 MVL2831CF 431 IN Armless Guest Chair w/casters, Mesh Back and Uph Seat MM Unit weight: 19 LB 8.6 KG Carton weight: 25 LB KG Carton volume: FT³ 0.33 MT³ M, N MVL MVL2832F 417 Stacks 5 high. Back exterior upholstered IN Armless Guest Chair, Uph Back and Seat in Jenny, Ebony (JN02). MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: FT³ 0.33 MT³ M, N MVL2832C 492 MVL2832CF 492 Back exterior upholstered IN Armless Guest Chair w/casters, Uph Back and Seat in Jenny, Ebony (JN02). MM Unit weight: 20 LB 9.1 KG Carton weight: 26 LB KG Carton volume: FT³ 0.33 MT³ M, N 40 officestogocanada.com

35 SEATING JAVA J JAVA Tilter chair with durable rear shroud. Flared fixed loop arms. Black frame and Black spider base. Dual wheel carpet casters (C65) are standard. Only available in Black mesh fabric seat (MS20) with contrasting Grey mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG10902 OTG IN High Back Tilter MM Unit weight: 23 LB 10.5 KG Carton weight: 28 LB 12.7 KG Carton volume: 3.4 FT³ 0.09 MT³ A, B, C, M, N, S officestogocanada.com 41

36 K KAZAN / KENO SEATING KAZAN Unique design by Zooey Chu. Comfortable multi-segmented cushions with deep padding. Double needle decorative stitch details. Fully upholstered arms. Dual wheel carpet casters (C65) are standard Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11670B OTG11670B 561 IN High Back Tilter MM Unit weight: 54 LB 24.5 KG Carton weight: 60 LB KG Carton volume: 8 FT³ 0.22 MT³ A, B, C, M, N, S KENO model OTG11657B Mesh back manager s tilter chair. Contoured back with internal lumbar strap provides excellent support. Chrome steel base with dual wheel carpet casters (C65) is standard. Chrome steel arms with removable armcaps. Only available in a Black mesh fabric seat (MS20) with a Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11657B 473 IN Tilter, Mesh Back MM Unit weight: 35 LB 15.9 KG Carton weight: 40 LB KG Carton volume: 3.9 FT³ 0.11 MT³ A, B, C, M, N, S 42 officestogocanada.com

37 SEATING KYLIE K KYLIE model MVL11786 Great for the hospitality market. Fully upholstered chair. Canadian made. Low rise closed upholstered arms conveniently fit below most working surfaces. Chrome steel base with dual wheel carpet casters (C65) is standard. MVL11786 seating surfaces can be upholstered in, in various colors (see page 119). MVL11786F can be upholstered in all Global grade 1 seating textiles (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. MVL MVL11786F 683 IN Medium Back Tilter MM Unit weight: 35 LB 15.9 KG Carton weight: 42 LB KG Carton volume: 6.75 FT³ 0.19 MT³ A, B, C, M, N, S officestogocanada.com 43

38 L LITE-LIFT SEATING LITE-LIFT model OTG11674 Multi-purpose folding chair. Lightweight, durable, portable and easy to clean. Folds flat for compact storage. Molded plastic seat and back in Oyster Grey only. Strong steel frame in Charcoal color with epoxy coating. Stackable up to 25 high on dolly (MVL2776). Shipped fully assembled. For complementary Lite-Lift folding tables, see page 101. OTG IN Armless Folding Chairs - Set of 4 MM Unit weight: 12 LB 5.5 KG Carton weight: 54 LB KG Carton volume: 5.23 FT³ 0.14 MT³ 1 carton (pricing is for the set, specifications are for one chair) MVL IN Dolly Stacks OTG11674 chairs MM Unit weight: 43 LB 19.5 KG horizontally, up to 25 high. Carton weight: 48 LB KG Carton volume: 3.08 FT³ 0.08 MT³ 44 officestogocanada.com

39 SEATING LOCATE L LOCATE Sample layout Five single seat units, two end arms, one table bridge and one corner table Sample layout Five single bench units, one table bridge and one corner table Locate is a modular seating series that is easy to configure, durable and ideal for linear and corner spaces. Modular non-handed linking components, can be reconfigured to suit your space. Cushions are fully upholstered and mounted on welded steel sled bases. Can be upholstered in all Global grade 1 seating textiles and in (see page 119). Tables are made from 45 lb. density particle board covered with thermally fused laminate on both sides. Tables are available in all Ionic finishes (see page 120). Most units can be ganged together with connecting brackets. Connecting brackets are not included with all models (see model description for details). Welded steel sled base and posts are available in Black (BLK) or Tungsten (TUN) finish, please specify. No upcharge. For Chrome finish frame on single seats, please specify (CHM). Add $53. For Chrome finish frame on tables or benches, please specify (CHM). Add $32. MVL5001NA 492 IN Single Seat Connecting brackets MM Unit weight: 29 LB 13.2 KG not included. Carton weight: 39 LB KG Carton volume: 16.5 FT³ 0.46 MT³ MVL Can be used on left or right side. IN End Arm (Single) MM Unit weight: 7 LB 3.2 KG Connecting brackets included. Carton weight: 9 LB 4.08 KG Dimensions do not include Carton volume: 1.1 FT³ 0.03 MT³ the connecting brackets. MVL5002C 156 For use in between single seat and bench units. IN Center Arm (Single) MM Unit weight: 7 LB 3.2 KG Connecting brackets included. Carton weight: 10 LB 4.54 KG Dimensions do not include Carton volume: 1.6 FT³ 0.04 MT³ the connecting brackets. MVL Connects single seat and bench units. IN Cushion Bridge MM Unit weight: 14 LB 6.4 KG Connecting brackets included. Carton weight: 18 LB 8.16 KG Dimensions do not include Carton volume: 2.6 FT³ 0.07 MT³ the connecting brackets. officestogocanada.com 45

40 L LOCATE SEATING MVL IN Single Bench Connecting brackets MM Unit weight: 19 LB 8.6 KG not included. Carton weight: 25 LB KG Carton volume: 8.5 FT³ 0.24 MT³ MVL IN Table Bridge - 24 Connecting brackets MM Unit weight: 18 LB 8.2 KG included. Carton weight: 22 LB 9.98 KG Carton volume: 0.6 FT³ 0.01 MT³ MVL IN Table Bridge - 14 Connecting brackets MM Unit weight: 14 LB 6.4 KG included. Carton weight: 18 LB 8.16 KG Carton volume: 0.4 FT³ 0.01 MT³ MVL IN Single Table - 24 Connecting brackets MM Unit weight: 19 LB 8.6 KG not included. Carton weight: 26 LB KG Carton volume: 8.5 FT³ 0.24 MT³ MVL IN Corner Table - Square Monopost and connecting MM Unit weight: 20 LB 9.1 KG brackets included. Carton weight: 24 LB KG Dimensions do not include Carton volume: 1.7 FT³ 0.04 MT³ the connecting brackets. MVL IN Corner Table - Quarter Round Monopost and connecting MM Unit weight: 18 LB 8.2 KG brackets included. Carton weight: 22 LB 9.98 KG Dimensions do not include Carton volume: 1.7 FT³ 0.04 MT³ the connecting brackets. 46 officestogocanada.com

41 SEATING LOCATE L MVL IN Connecting Brackets (pair) Joins single seat and MM Unit weight: 1.5 LB 0.7 KG bench units. Carton weight: 3.5 LB 1.59 KG Carton volume: 0.1 FT³ MT³ officestogocanada.com 47

42 M M-TASK SEATING M-TASK model MVL2911 model MVL2914 Full function ergonomic seating. Canadian made. Slim profile with highly contoured back and waterfall seat front. Available with two different mechanism options: synchro-tilter and multi-tilter. Standard with height and width adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. MVL2912, MVL2912F, MVL2914 and MVL2914F feature a height and angle adjustable headrest. Seating surfaces can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. Synchro-tilter chairs - Synchro tilt with multi-position tilt lock. - Tilt tension adjustment. - Ratchet back height adjustment. - Pneumatic seat height adjustment. Multi-tilter chairs - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustment. - Forward seat angle adjustment. - Ratchet back height adjustment. - Sliding seat depth adjustment. - Pneumatic seat height adjustment. (C9R). Add $16/set. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL MVL2911F 566 IN High Back Synchro-Tilter MM Unit weight: 44 LB 20 KG Carton weight: 56 LB 25.4 KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, H, L, M, N, Q MVL MVL2912F 647 IN Executive Back Synchro-Tilter w/adj. Headrest MM Unit weight: 49 LB 22.3 KG Carton weight: 62 LB KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, H, L, M, N, Q MVL MVL2913F 589 IN High Back Multi-Tilter MM Unit weight: 50 LB 22.7 KG Carton weight: 62 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, E, F, G, H, M, N, Q, S 48 officestogocanada.com

43 SEATING M-TASK / MINTO M MVL MVL2914F 671 IN Executive Back Multi-Tilter w/adj. Headrest MM Unit weight: 51 LB 23.2 KG Carton weight: 63 LB KG Carton volume: 11 FT³ 0.31 MT³ A, B, C, D, E, F, G, H, M, N, Q, S MINTO model MVL2747 Multi-purpose stacking chairs. Canadian made. Fully upholstered seat and back. Four-legged round steel tube frame. Armchair has polypropylene armcaps. Stackable up to 5 high on floor or on optional dolly (MVL2749). Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Shipped fully assembled. MVL IN Low Back Stacking Armchair Stacks 5 high. MM Unit weight: 15 LB 6.8 KG Carton weight: 18 LB 8.16 KG Carton volume: FT³ 0.36 MT³ M, N 2 per carton (pricing and specifications are for one chair) MVL IN Armless Low Back Stacking Chair Stacks 5 high. MM Unit weight: 14 LB 6.4 KG Carton weight: 17 LB 7.71 KG Carton volume: FT³ 0.31 MT³ M, N 2 per carton (pricing and specifications are for one chair) MVL IN Dolly Black steel frame on 2 casters. MM Unit weight: 13 LB 5.9 KG Carton weight: 16 LB 7.26 KG Accommodates MVL2747 and RTA 1 Carton volume: 3.8 FT³ 0.1 MT³ MVL2748 chairs, up to 5 high. officestogocanada.com 49

44 M MVL FILE BUDDY MVL FILE BUDDY Swivel stool ideal for filing and any mobile desk. Five-legged injection molded base available in Black only Dual wheel carpet casters (C65) are standard diameter seat upholstered in Black vinyl (70). SEATING (C65R). Add $16/set. model MVL1105 MVL IN Swivel Stool - 5 Pneumatic, 20 Base MM Unit weight: 11 LB 5 KG Carton weight: 14 LB 6.35 KG Ergonomic feature: RTA 1 Carton volume: 2.5 FT³ 0.07 MT³ C MVL IN Swivel Stool - 10 Pneumatic, 22 Base MM Unit weight: 14 LB 6.4 KG Carton weight: 17 LB 7.71 KG Ergonomic feature: RTA 1 Carton volume: 2.9 FT³ 0.08 MT³ C 50 officestogocanada.com

45 SEATING NEMO Breathable striped mesh back. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Scuff resistant arched base. Dual wheel carpet casters (C1) are standard. Only available in Jenny, Ebony (JN02) with coordinating Black mesh back. Center tilt with upright position tilt lock. Tilt tension adjustment. NEMO N (C9R). Add $76/set. model OTG11921J OTG11921J 394 IN Mesh Back Tilter MM Unit weight: 33 LB 15 KG Carton weight: 40 LB KG Carton volume: 4.25 FT³ 0.12 MT³ A, B, C, H, M, N, S officestogocanada.com 51

46 N NEWCASTLE NEWCASTLE A distinguished management and boardroom tilter chair. Fixed durable nylon arms with upholstered armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. SEATING Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11782B OTG11782B 396 IN High Back Tilter MM Unit weight: 34 LB 15.5 KG Carton weight: 40 LB KG Carton volume: 5.75 FT³ 0.16 MT³ A, B, C, M, N, S 52 officestogocanada.com

47 SEATING OTTO Value task seating. Thick foam cushions and decorative stitch detail. Fully upholstered seat and back. Dual wheel carpet casters (C65) are standard. Only available in a Black mesh fabric (MS20). OTTO O (C65R). Add $76/set. model OTG11343B OTG11343B 229 IN Task Chair MM Unit weight: 25 LB 11.4 KG Carton weight: 30 LB KG Carton volume: 3.5 FT³ 0.09 MT³ C, M, N OTG IN Height Adjustable T-Arms - 1 pair MM Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) officestogocanada.com 53

48 O OVERTIME / OVERTIME 350 OVERTIME model MVL2756 Canadian made, full function ergonomic chair designed to promote good posture and provide comfort for long-term sitting. High comfort seat made from variable density seat foams and a memory foam top. Standard with height and width adjustable T-arms with durable self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. MVL2756 seating surfaces can be upholstered in, in various colors (see page 119). MVL2756F can be upholstered in all Global grade 1 seating textiles (see page 119). SEATING Multi-tilter mechanism with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Ratchet back height adjustment. (C65R). Add $16/set. For optional sliding seat depth adjustment, please specify (MD). Add $26. MVL MVL2756F 517 IN High Back Multi-Tilter MM Unit weight: 58 LB 26.4 KG Carton weight: 63 LB KG Carton volume: 10.5 FT³ 0.29 MT³ A, B, C, D, F, G, H, M, N, Q, S OVERTIME 350 model MVL13040 Canadian made, specifically intended for users of above average height and/or weight, up to 350 lbs. Not intended for average size users. High comfort seat made from variable density seat foams and a memory foam top. Standard with height and width adjustable T-arms with sliding, rotating and lockable armcaps. Width adjustable arm extensions are standard. Dual wheel carpet casters (C65) are standard. MVL13040 seating surfaces can be upholstered in, in various colors (see page 119). MVL13040F can be upholstered in all Global grade 1 seating textiles (see page 119). Multi-tilter mechanism with infinite position tilt lock. Infinite position back and seat angle adjustments, including forward tilt. Ratchet back height adjustment. Seat depth adjustment. (C65R). Add $16/set. MVL MVL13040F 799 IN High Back Heavy Duty Multi-Tilter MM Unit weight: 62 LB 28.2 KG Carton weight: 68 LB KG Carton volume: FT³ 0.41 MT³ A, B, C, D, E, F, G, H, M, N, Q, R, S 54 officestogocanada.com

49 SEATING PACER / PACIFIC P PACER model OTG11685 Mesh back synchro-tilter chair. Unique back shroud and base design detailed with Tungsten accents. Standard with height adjustable T-arms with polyurethane armcaps. Dual wheel carpet casters (C65) are standard. Mesh back is available in Black only. Seats can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Synchro tilt with infinite position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG IN High Back Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 42 LB 19.1 KG Carton weight: 47 LB KG Carton volume: 4.75 FT³ 0.13 MT³ A, B, C, H, L, M, N OTG IN Medium Back Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 40 LB 18.2 KG Carton weight: 44 LB KG Carton volume: 4 FT³ 0.11 MT³ A, B, C, H, L, M, N PACIFIC High back management chair. Canadian made. Plush cushions and upholstered padded armcaps. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. model MVL11870 MVL IN High Back Tilter MM Unit weight: 41 LB 18.6 KG Carton weight: 47 LB KG Carton volume: 9.5 FT³ 0.26 MT³ A, B, C, M, N, S officestogocanada.com 55

50 P PART-TIME SEATING PART-TIME model MVL2836F model MVL2847F Canadian made, value priced, general office seating. Available with two different mechanism options: task or posture task. Contoured cushions and waterfall seat edge. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Task chairs - Infinite position back angle adjustment. - Seat depth adjustment. - Pneumatic seat height adjustment. Posture task chairs - Infinite position back angle adjustment. - Manual back height adjustment. - Pneumatic seat height adjustment. (C65R). Add $16/set. MVL2836F 247 IN Armless Task MM Unit weight: 27 LB 12.3 KG Carton weight: 33 LB KG Carton volume: 6.5 FT³ 0.18 MT³ C, E, M, N MVL2837F 289 IN Armless Posture Task MM Unit weight: 31 LB 14.1 KG Carton weight: 37 LB KG Carton volume: 6.5 FT³ 0.18 MT³ C, D, G, M, N MVL2846F 310 IN Task w/arms MM Unit weight: 33 LB 15 KG Carton weight: 39 LB KG Carton volume: 7 FT³ 0.19 MT³ C, E, H, M, N MVL2847F 353 IN Posture Task w/arms MM Unit weight: 37 LB 16.8 KG Carton weight: 43 LB 19.5 KG Carton volume: 8.5 FT³ 0.24 MT³ C, D, G, H, M, N 56 officestogocanada.com

51 SEATING RETRO R RETRO Management and boardroom chair. Unique seat suspension and segmented cushions offer a very plush feel. Chrome arms with upholstered armrests. Chrome frame and base. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11648B OTG11648B 602 IN High Back Tilter MM Unit weight: 43 LB 19.5 KG Carton weight: 48 LB KG Carton volume: 7.75 FT³ 0.21 MT³ A, B, C, M, N, S officestogocanada.com 57

52 S SAFARI / SIX 13 SEATING SAFARI model OTG13026 Mesh back tilter chair. Compact design suitable for average to petite size individuals. Contoured Black mesh back with lumbar strap provides excellent support. Fixed loop arms. Black base with dual wheel carpet casters (C1) is standard. Seat can be upholstered in all Global grade 1 seating textiles or in (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. OTG IN Medium Mesh Back Tilter MM Unit weight: 27 LB 12.3 KG Carton weight: 32 LB KG Carton volume: 4.5 FT³ 0.12 MT³ A, B, C, M, N, S SIX 13 A value priced multi-tilter chair with many ergonomic features. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Upholstered in Black Quilt (QL10) only. Multi-Center tilt with infinite position tilt lock. Infinite position back and seat angle adjustments. Concealed ratchet back height adjustment. (C65R). Add $76/set. model OTG11613B OTG11613B 438 IN Medium Back Multi-Tilter MM Unit weight: 37 LB 16.8 KG Carton weight: 41 LB 18.6 KG Carton volume: 5.77 FT³ 0.16 MT³ A, B, C, D, G, H, M, N, S 58 officestogocanada.com

53 SEATING SIX 31 S SIX 31 model OTG11631G A great general purpose office chair. Contoured seat and back with thick cushions. Standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. OTG11531B and OTG11631B are upholstered in Black Quilt (QL10) OTG11631G is upholstered in Charcoal Grey Quilt (QL11). Multi-tilter chair - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustments. - Internal rachet back height adjustment. - Seat depth adjustment. - Pneumatic seat height adjustment. Operator chairs - Center tilt with infinite position tilt lock. - Tilt tension adjustment. - Independent back and seat angle adjustments - Back height adjustment. - Pneumatic seat height adjustment. (C65R). Add $76/set. OTG11531B 534 Black IN Medium Back Multi-Tilter MM Unit weight: 55 LB 25 KG Carton weight: 65 LB KG Carton volume: 8 FT³ 0.22 MT³ A, B, C, D, E, F, G, H, M, N, S OTG11631B 391 Black IN Medium Back Operator MM Unit weight: 42 LB 19.1 KG Carton weight: 46 LB KG Carton volume: 6.5 FT³ 0.18 MT³ A, B, C, D, G, H, M, N, S officestogocanada.com 59

54 S SODA / STACKLITE SEATING SODA model MVL13017 A contemporary, yet retro light lounge chair featuring fully upholstered seat and back. Back design offers flexible movement. Generous proportions allow for a variety of seating positions. Chrome frame with clear polycarbonate glides is standard and suitable for carpet, rubber or concrete flooring. Can be upholstered in all Global grade 1 seating textiles or in (see page 119). MVL MVL13017F 530 IN Lounge Chair MM Unit weight: 30 LB 13.6 KG Carton weight: 37 LB KG Carton volume: FT³ 0.44 MT³ M, N STACKLITE model MVL13046 Canadian made, lightweight stacking chair. ¾ steel tube frame in Black Sandtex finish. Standard with Black polypropylene glides. Stacks up to 10 high on floor or dolly (OTG11705). Features a handhold in upper back to assist with handling and stacking. Can be upholstered in all Global grade 1 seating textiles or in (see page 119). MVL IN Lightweight Stacking Side Chair Sold in sets of 4 chairs. MM Unit weight: 13 LB 5.9 KG Carton weight: 14 LB 6.35 KG Carton volume: 12 FT³ 0.33 MT³ M, N 4 per carton (pricing and specifications are for one chair) OTG IN Dolly Stacks MVL13046 chairs, MM Unit weight: 6 LB 2.7 KG up to 10 high. Carton weight: 6.5 LB 2.95 KG Carton volume: 1.5 FT³ 0.04 MT³ 60 officestogocanada.com

55 SEATING STRADIC S STRADIC model MVL11860 Tilter chair with a unique design mesh back. Standard with height adjustable arms with soft self-skinned urethane (SSU) armcaps that slide forward and backward. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. Seat can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. MVL IN Tilter, Mesh Back and Uph seat MM Unit weight: 35 LB 15.9 KG Carton weight: 40 LB KG RTA 1 Carton volume: 9.5 FT³ 0.26 MT³ A, B, C, H, M, N, S officestogocanada.com 61

56 T TAMI SEATING TAMI model MVL1617 model MVL1616 Canadian made task chairs. Hinged back for enhanced comfort. Scuff resistant outer back shroud. MVL1617 is standard with height adjustable T-arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C65) are standard. Can be upholstered in all Global grade 1 seating textiles with the exception of Luxhide (see page 119). Seat depth adjustment. (C65R). Add $16/set. MVL IN Armless Task MM Unit weight: 18 LB 8.2 KG Carton weight: 21 LB 9.53 KG Carton volume: 3.6 FT³ 0.1 MT³ C, E, M, N MVL IN Task w/arms MM Unit weight: 24 LB 10.9 KG Carton weight: 27 LB KG Carton volume: 4.6 FT³ 0.13 MT³ C, E, H, M, N MVL IN Height Adjustable T-Arms - 1 pair MM Unit weight: 8 LB 3.6 KG Carton weight: 10 LB 4.54 KG Carton volume: 1.3 FT³ 0.03 MT³ 1 pair per carton (pricing is for the pair, specifications are for one arm) 62 officestogocanada.com

57 SEATING THOMPSON / TOMA T THOMPSON model OTG11633B Plush management chair. Contoured cushions with waterfall seat edge and integrated headrest. Polished aluminum fixed loop arms with upholstered armcaps. Polished aluminum base with scuff resistant tips and dual wheel carpet casters (C65). Seating surfaces are upholstered in Black with contrasting stitch details. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. OTG11633B 597 IN High Back Tilter MM Unit weight: 44 LB 20 KG Carton weight: 48 LB KG Carton volume: 7.5 FT³ 0.21 MT³ A, B, C, M, N, S TOMA Mesh back synchro-tilter chair. Standard with height adjustable T arms with self-skinned urethane (SSU) armcaps. Black base with dual wheel carpet casters (C1) is standard. Only available in Black polyester seat fabric with a Black mesh back. Upright position tilt lock. Tilt tension adjustment. Height adjustable flexible lumbar support. (C9R). Add $76/set. model OTG13032 OTG IN Medium Back Synchro-Tilter MM Unit weight: 31 LB 14.1 KG Carton weight: 36 LB KG Carton volume: 4.7 FT³ 0.13 MT³ A, B, C, D, H, L, M, N officestogocanada.com 63

58 T TUMI SEATING TUMI Contemporary management and boardroom chair. Fixed durable nylon arms. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11776B OTG11776B 318 IN High Back Tilter MM Unit weight: 31 LB 14.1 KG Carton weight: 37 LB KG Carton volume: 4.2 FT³ 0.11 MT³ A, B, C, M, N, S 64 officestogocanada.com

59 SEATING ULTRA U ULTRA Canadian made tilter and guest chairs. Internal welded steel frame. Chrome fixed arms (except armless models) and base. Dual wheel carpet casters (C65) are standard (except guest chairs). Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119). Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $16/set. Optional removable upholstered armcaps are available for tilter models with arms, please order (MVL11733). model MVL11730 model MVL11743 ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL IN High Back Tilter w/arms MM Unit weight: 32 LB 14.5 KG Carton weight: 44 LB KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL IN Armless High Back Tilter MM Unit weight: 28 LB 12.7 KG Carton weight: 38 LB KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL IN Upholstered Armcaps - 1 pair For models with arms: MM Unit weight: 0.25 LB 0.1 KG MVL11730, MVL Carton weight: 0.75 LB 0.34 KG Carton volume: 0.2 FT³ 0.01 MT³ (pricing is for the pair, specifications are for one armcap) MVL IN Low Back Tilter w/arms MM Unit weight: 35 LB 15.9 KG Carton weight: 42 LB KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S officestogocanada.com 65

60 U ULTRA SEATING MVL IN Armless Low Back Tilter MM Unit weight: 31 LB 14.1 KG Carton weight: 38 LB KG RTA 1 Carton volume: 11 FT³ 0.31 MT³ A, B, C, M, N, S MVL IN Medium Back Guest Chair, Cantilever Base MM Unit weight: 32 LB 14.5 KG Carton weight: 40 LB KG Carton volume: FT³ 0.37 MT³ M, N MVL IN Armless Medium Back Guest Chair, Cantilever Base MM Unit weight: 26 LB 11.8 KG Carton weight: 32 LB KG Carton volume: FT³ 0.38 MT³ M, N 66 officestogocanada.com

61 SEATING VALAN V VALAN model OTG11980 Synchro-tilter chairs with a geometric square mesh back design and internal lumbar support. Standard with height adjustable T-arms with soft self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard. Air flow mesh back is available in Black only. OTG11980 seating surface can be upholstered in, in various colors (see page 119) OTG11980F seat can be upholstered in all Global grade 1 seating textiles (see page 119) Synchro tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. OTG OTG11980F 559 IN High Back Synchro-Tilter, Mesh Back and Uph Seat MM Unit weight: 36 LB 16.4 KG Carton weight: 42 LB KG Carton volume: 5.75 FT³ 0.16 MT³ A, B, C, H, L, M, N officestogocanada.com 67

62 V VANIER SEATING VANIER model MVL3170 model MVL3172 Management, boardroom and guest chairs. Canadian made. Generously padded seat and compound-curved back. Fixed nylon arms with self-skinned urethane (SSU) armcaps. Dual wheel carpet casters (C1) are standard (except guest chair). Guest chair has an oval steel tube frame with sled base. Seating surfaces can be upholstered in Luxhide bonded leather, in various colors (see page 119) Center tilt with upright position tilt lock. Tilt tension adjustment. (C9R). Add $16/set. ALTERNATE TEXTILE OPTIONS Graded-in and GPM textiles are available with a minimum of 10 units purchased. Contact Customer Service for further details. MVL IN High Back Tilter MM Unit weight: 40 LB 18.2 KG Carton weight: 47 LB KG Carton volume: 12 FT³ 0.33 MT³ A, B, C, M, N, S RTA 1 MVL IN Medium Back Tilter MM Unit weight: 35 LB 15.9 KG Carton weight: 41 LB 18.6 KG Carton volume: 11.5 FT³ 0.32 MT³ A, B, C, M, N, S RTA 1 MVL IN Medium Back Guest Chair - Sled Base MM Unit weight: 31 LB 14.1 KG Carton weight: 37 LB KG Carton volume: FT³ 0.44 MT³ M, N 68 officestogocanada.com

63 SEATING VOS V VOS Contemporary design. Fully upholstered seat and back. Scuff resistant back shell. Height adjustable arms with self-skinned urethane (SSU) armcaps. Black spider base with dual wheel carpet casters (C1) is standard. Only available in Black air mesh fabric (MS20). Upright position tilt lock. Tilt tension adjustment. (C9R). Add $76/set. model OTG11715B OTG11715B 429 IN High Back Synchro-Tilter MM Unit weight: 41 LB 18.6 KG Carton weight: 45 LB KG Carton volume: 4.7 FT³ 0.13 MT³ A, B, C, H, L, M, N officestogocanada.com 69

64 W WOODBRIDGE WOODBRIDGE Management and boardroom chair. Durable nylon arms with upholstered armrests. Dual wheel carpet casters (C65) are standard. Seating surfaces are upholstered in Black. SEATING Center tilt with upright position tilt lock. Tilt tension adjustment. (C65R). Add $76/set. model OTG11617B OTG11617B 352 IN High Back Tilter MM Unit weight: 34 LB 15.5 KG Carton weight: 38 LB KG Carton volume: 6.13 FT³ 0.17 MT³ A, B, C, M, N, S 70 officestogocanada.com

65 SEATING YOHO Y YOHO model MVL2789 Canadian made task chairs. Thick cushion compound-curved back offers great lumbar support. Standard with height adjustable T-arms with durable self-skinned urethane (SSU) armcaps (except armless models). Dual wheel carpet casters (C65) are standard. Drafting chairs are equipped with a height adjustable Chrome footrest. Seating surfaces can be upholstered in Luxhide bonded leather (various colors) or in all Global grade 1 seating textiles (see page 119). For a fabric seat specify models ending in F. Seat depth adjustment. (C65R). Add $16/set. MVL MVL2786F 265 IN Armless Task MM Unit weight: 23 LB 10.5 KG Carton weight: 28 LB 12.7 KG Carton volume: 4.7 FT³ 0.13 MT³ C, E, M, N MVL MVL2789F 348 IN Task w/arms MM Unit weight: 29 LB 13.2 KG Carton weight: 34 LB KG Carton volume: 4.7 FT³ 0.13 MT³ C, E, H, M, N MVL MVL2796F 411 IN Armless Drafting Task MM Unit weight: 40 LB 18.2 KG Carton weight: 45 LB KG Carton volume: 7 FT³ 0.19 MT³ C, E, M, N officestogocanada.com 71