visio overview work chairs Statement of Line Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point.

Transcription

1 visio overview Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point. Visio Chairs have been designed and tested for users weighing up to 300 lbs Visio Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection Task Chair with Synchro-Tilt shown Plastic Frame Tilt Lock (Not shown) Apex Height of 3" Range of 0.6" Flexweave Arm Height 2D - 4" 4D - 4 3/4" Seat Slider/ Seat of 2 1/2" Tension Control 2 3/8" Total Arm Width : 2D - 3" 4D - 4 1/4" Seat Height : Standard 16 1/2" /2" High 17"-22" Low 14 1/2" /2" Five Star Base Statement of Line No Arms Fixed 2D Arms 4D Arms With Fixed With

2 visio dimensions & material requirements Dimensions For Conversion to Metric, multiply dimension by Width Between Arms Fixed 18 1/2" 2D 17"- 20" 4D 14"- 20 1/4" Task Chair WEIGHT 46 lbs Width 19" Apex Height 6"-10" Adjustable Seat 16 1/2" - 19" Angle between Seat and Overall Height (without headrest) 41" adds 7.5"- 10" rest Height from Seat 23 3/4" Arm Height from Seat Fixed 8" 2D 7"- 11" 4D 7 1/4"- 12" Seat Height from Floor Standard 16 1/2"- 20 1/2" Low 14 1/2" /2" High 17 1/4" /4" Seat Width 18 1/2" Overall Width 30" Overall 30" COM/COL Material Requirement More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to the next hide. SEAT FABRIC COM COL [yards] [sq. ft] Mid- 3/4 9

3 visio adjustment features & instructions SEAT HEIGHT ADJUSTMENT SEAT DEPTH ADJUSTMENT To raise the chair, lift the lever up while lifting your weight from the seat until you reach the desired level, then release to lock in place. To lower the chair, lift the lever up and allow your weight to push the seat down until you reach the desired level, then release to lock in place. To adjust the seat depth, depress the button and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the button to lock the seat in place. BACK TILT ADJUSTMENT TILT TENSION ADJUSTMENT To adjust the angle of reclination, push the lever down to unlock the back. Recline to the desired position and lift the lever up to lock in place or leave to allow backrest to recline freely. Leaning back, determine if the resistance of the chair is comfortable. For less resistance, pull the tension adjustment knob out and turn it counterclockwise. For greater resistance, turn the knob clockwise. HEADREST DEPTH ADJUSTMENT HEADREST HEIGHT ADJUSTMENT To adjust the headrest depth, depress the button and pull or push the headrest forward or backward. Release the button to lock the headrest in place. To adjust the headrest height, depress the button and raise or lower the headrest to the desired height. Release the button to lock the headrest in place.

4 visio adjustment features & instructions (continued) 2D/4D ARM WIDTH ADJUSTMENT 2D ARM HEIGHT ADJUSTMENT To adjust the arm height, press the small button on the outside of either arm to raise or lower it to the desired position. Release the button to lock in place. To adjust the width of each arm, push the lever down and slide the arm to the desired position. Pull the lever up to lock the arm in place. 4D ARM HEIGHT ADJUSTMENT 4D ARM PIVOT ADJUSTMENT To adjust the arm height, press the small button located behind either arm to raise or lower it to the desired position. Release the button to lock in place. To pivot the arm cap, grasp the arm, rotate inward or outward and release at the desired position. 4D ARM SLIDER ADJUSTMENT LUMBAR ADJUSTMENT To adjust the arm cap depth position, grasp the arm cap and firmly slide forward or backward to the desired position. To adjust the lumbar height, grasp lumbar pad while seated and slide it up or down to the desired position. For lumbar depth adjustment, press the pad inward; depress buttons to release to original position.

5 N V I T Visio Task Chair 2D Arm 4D Arm Fixed T-Arm FEATURES Standard pneumatic cylinder provides height adjustment of 4" height adjustment of 3" Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6" 4D arm pivots 20 4D arm depth is adjustable Seat depth adjustment of 2 1/2" -tilt can be locked in three positions or left free flow Ebony base is available in plastic only Synchro-tilt 2:1 ratio Tension control casters are standard and are well suited for soft flooring such as carpeting casters are available for use on hard flooring, such as wood, concrete, or tile NOTES is finished in Black vinyl. PRODUCT OPTIONS Arm Style Arms F Fixed W 2D & Width- Adj. Q 4D Width-, & - Adjustable with Pivoting Arm Caps Flexweave FW11 Storm White FW12 Sahara Frost FW13 Carbon Blue FW14 Espresso FW15 Ebony FW16 Banner Red FW17 Graphic Steel Seat Leather Seat Seat (If applicable) Cylinder Style Seat S With Seat 1 2" Range 1 Standard 2 High 3 Low Upright Base Casters/ Glides (Optional) A Casters, ~ Casters, B Glides, C Glides, SAMPLE ORDER CODE NVIT N Y Q FW14 M205 N 2 C9 C9 DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10 No Arms Fixed D & Width-Adjustable D Width-, & -Adjustable Leather Leather Leather Leather LA LB LC LD No Arms Fixed D & Width-Adjustable D Width-, & -Adjustable If (Y) is specified add 117 If (Y) is specified add 69 If Seat (S) is specified add 56 If Polished Upright (C9) is specified add 45 If Polished Base (C9) is specified add 66 If Casters (A) are specified add 18 If Glides (B) are specified add 18 If Glides (C) are specified add 29

6 FEATURES Standard pneumatic cylinder provides height adjustment of 4" height adjustment of 3" Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6" 4D arm pivots 20 4D arm depth is adjustable Seat depth adjustment of 2 1/2" -tilt can be locked in three positions or left free flow Ebony base is available in plastic only Synchro-tilt 2:1 ratio Tension control casters are standard and are well suited for soft flooring such as carpeting casters are available for use on hard flooring, such as wood, concrete, or tile NOTES is finished in Black vinyl. Fixed T-Arm N V I T J Visio Task Chair (CAL-TB133) 2D Arm 4D Arm PRODUCT OPTIONS Arm Style Arms F Fixed T-arms W 2D & Width- Adj. Q 4D Width-, & - Adjustable with Pivoting Arm Caps Flexweave FW11 Storm White FW12 Sahara Frost FW13 Carbon Blue FW14 Espresso FW15 Ebony FW16 Banner Red FW17 Graphic Steel Seat Leather Seat Seat S With Seat Seat (If applicable) 1 2" Range Cylinder Style 1 Standard 2 High 3 Low Upright Base Casters/ Glides (Optional) A Casters, ~ Casters, B Glides, C Glides, SAMPLE ORDER CODE NVITJ N Y Q FW14 M205 N 2 C9 C9 DESCRIPTION PRICE Grade 1 Grade 2 Grade 3 No Arms Fixed D & Width-Adjustable D Width-, & -Adjustable If (Y) is specified add 117 If (Y) is specified add 69 If Seat (S) is specified add 56 If Polished Upright (C9) is specified add 45 If Polished Base (C9) is specified add 66 If Casters (A) are specified add 18 If Glides (B) are specified add 18 If Glides (C) are specified add 29 CAL-TB133 flammability test procedure established by the State of California for seating furniture that is used in public occupancies.