ADVANCE. 2 Pole Impeller PUMPS PUMPS
|
|
- Sharon O’Brien’
- 5 years ago
- Views:
Transcription
1 2 Pole Impeller.4 The Advance design meets requirements of low flow, higher head applications as compared to the Advance legacy series. Use of Noryl resin for wetted parts enables this strong, durable, versatile unit to cover a broad range of fluid applications. The patented Impenatra Seal properly handles challenging applications at a fraction of the cost of exotic alloys, by preventing fluids contact with metal parts. Multiple drain locations allow for several discharge orientations. Performance Envelope GPM 142 Head % Peak Efficiency Advance 2 Pole Full / Minimum Diameter Performance Curve Speed: rpm Size: in hp
2 2 Pole Data Sheet.4 P ump: Size: 4 Type: Advance Synch speed: 3 rpm Speed: rpm Dia: 6.3 in Curve: 1-4 Impeller:.4 Specific Speeds: Ns: 17 Nss: --- Dimensions: P ump Limits: Temperature: 18 F Pressure: psi g Sphere size:.1 in Suction: 1. in Discharge:.7 in Power: --- Eye area: --- S earch Criteria: Flow: --- Head: --- F luid: Water Temperature: F SG: 1 Vapor pressure:.63 psi a Viscosity: 1. cp Atm pressure: 14.7 psi a NPSHa: --- Motor: Standard: NEMA Enclosure: TEFC Sizing criteria: Max Power on Design Curve Size: Speed: 3 Frame: 6J ---- Data P oint ---- Flow: 33.3 Head: 124 ft Eff: 48.3% Power: 2.16 hp NPSHr: ft in Design Curve ---- Shutoff head: 142 ft Shutoff dp: 61.6 psi Min flow: BEP: 33.3 NOL power: -- Max Curve -- Max power: 8.7 hp Performance E valuation: F low S peed Head E fficiency Power NP S Hr rpm ft % hp ft
3 2 Pole Impeller. The Advance design meets requirements of low flow, higher head applications as compared to the Advance legacy series. Use of Noryl resin for wetted parts enables this strong, durable, versatile unit to cover a broad range of fluid applications. The patented Impenatra Seal properly handles challenging applications at a fraction of the cost of exotic alloys, by preventing fluids contact with metal parts. Multiple drain locations allow for several discharge orientations. Performance Envelope 3 GPM 2 Head % Peak Efficiency Advance 2 Pole Full / Minimum Diameter Performance Curve Speed: rpm Size:. 1.9 in hp
4 2 Pole Data Sheet. P ump: Size: Type: Advance Synch speed: 3 rpm Speed: rpm Dia:.9 in Curve: 114- Impeller:. Specific Speeds: Ns: 2 Nss: --- Dimensions: P ump Limits: Suction: 1. in Discharge:.7 in Temperature: 18 F Power: --- Pressure: psi g Eye area: --- Sphere size:.22 in S earch Criteria: Flow: --- Head: --- F luid: Water Temperature: F SG: 1 Vapor pressure:.63 psi a Viscosity: 1. cp Atm pressure: 14.7 psi a NPSHa: --- Motor: Standard: NEMA Enclosure: TEFC Sizing criteria: Max Power on Design Curve Size: Speed: 3 Frame: 6J ---- Data P oint ---- Flow: Head: ft Eff: 3% Power: NPSHr: ft in Design Curve ---- Shutoff head: Shutoff dp: Min flow: BEP: 148 ft 64.1 psi 38.4 NOL power: Max Curve -- Max power: hp Performance E valuation: F low S peed Head E fficiency Power NP S Hr rpm ft % hp ft
5 2 Pole Impeller.6 The Advance design meets requirements of low flow, higher head applications as compared to the Advance legacy series. Use of Noryl resin for wetted parts enables this strong, durable, versatile unit to cover a broad range of fluid applications. The patented Impenatra Seal properly handles challenging applications at a fraction of the cost of exotic alloys, by preventing fluids contact with metal parts. Multiple drain locations allow for several discharge orientations. Performance Envelope 7 GPM 8 Head 6% Peak Efficiency Advance 2 Pole Full / Minimum Diameter Performance Curve Speed: rpm Size: in
6 2 Pole Data Sheet.6 P ump: Size: 6 Type: Advance Synch speed: 3 rpm Speed: rpm Dia:.994 in Curve: Impeller:.6 Specific Speeds: Ns: 6 Nss: --- Dimensions: P ump Limits: Suction: 1. in Discharge:.7 in Temperature: 18 F Power: --- Pressure: psi g Eye area: --- Sphere size:.3 in S earch Criteria: Flow: --- Head: --- F luid: Water Temperature: F SG: 1 Vapor pressure:.63 psi a Viscosity: 1. cp Atm pressure: 14.7 psi a NPSHa: --- Motor: Standard: NEMA Enclosure: TEFC Sizing criteria: Max Power on Design Curve Size: hp Speed: 3 Frame: 184T Flow: Head: ---- Data P oint ft Eff: 6.1% Power: NPSHr: 2.97 hp 19.2 ft in 6.1 Shutoff head: Shutoff dp: Min flow: BEP: ---- Design Curve ft 6 psi 49.4 NOL power: Max Curve -- Max power: Performance E valuation: F low S peed Head E fficiency Power NP S Hr rpm ft % hp ft
Submersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationMargaret M. Alkek Building for Biomedical Research Baylor College of Medicine. Appendix A Runaround Loop Component Information
Justin Mulhollan Spring 06 Mechanical Option Margaret M. Alkek Building for Biomedical Research Baylor College of Medicine Houston, TX Appendix A Runaround Loop Component Information 47 Pump Data Sheet
More informationSystem One Pumps Selecting Centrifugal Pumps S1-201
Selecting Centrifugal Pumps S1-201 Operating Parameters Head/Capacity Temperature Viscosity Density Vapor Pressure Solids Content Chemical Compatibility Multiple conditions Remember The system controls
More informationReliable, Corrosion Resistant Chemical Pumps
1 Product brochure Reliable, Corrosion Resistant Chemical Pumps Advance is a registered 1 Specifications DESIGN The Advance 1 is molded out of high-quality glass-filled Noryl, which gives it many advantages.
More informationITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationdppumps-usa.com Excellence in Multistage Vertical Pumps Represented exclusively in North America by:
Represented exclusively in North America by: NSF/ANSI 61-G & 372 GLOBAL PUMP MARKETING CO. Excellence in Multistage Vertical s Don t forget to download the FREE DP select software! Details on pages 24-2.
More informationJE1, JE1 4 SERIES CONTENTS: Stainless Steel Construction Closed impeller Flow: 8 to 95 GPM Head: to 144 ft. Range of HP: to 3 HP
JE, JE SERIES Stainless Steel Construction Closed impeller Flow: 8 to 9 GP Head: to ft. Range of HP: to 3 HP Applications: Residential booster system Irrigation Utility NSF / Annex G Certified* Certified
More informationItem No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions
Model CDU, Contents CDU, Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions CDU70/1-3/4HP CDU70/3-1 1 /2HP CDU70/5-2HP CDU120/1-1HP CDU120/3-1 1 /2HP 3 5, 311 6 311
More informationReliable, Corrosion Resistant Chemical Pumps
3 Product brochure Reliable, Corrosion Resistant Chemical Pumps 8.447.8342 3 Specifications DESIGN The Advance 3 is a close coupled, end suction centrifugal pump line which is molded in Noryl. Its high
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationCDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps
odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationevmsu Stainless Steel Vertical Multistage Pump curve SPeciFicationS
evmsu curve SPeciFicationS the specifications below qualify the curves shown on the following pages. the curves refer to effective speed of rpm for 2-pole asynchronous motors at z. Measurements were carried
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationDolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ (856) FAX (856) NO EXCEPTION TAKEN
Dolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ 08081 (856) 629-9331 FAX (856) 629-6545 TO: Imad Haq PROJECT NAME: Philadelphia International Airport Concourse B HVAC Renovation &
More informationAquaBoost Packaged Systems
Constant Pressure. Plain and Simple. AquaBoost Packaged Systems BUILT WITH THE QUALITY YOU VE COME TO EXPECT FROM GOULDS WATER TECHNOLOGY BRAQBST AQUABOOST P U M P S T A T I O N S AquaBoost Pump Stations
More informationITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps
B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationSeries. NV Vertical Multistage Booster Pump
NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationITT. Red Jacket Water Products GRIZZLY. red JaCKet Water Products. Engineered for life BRJGRIZZ. Residential Water Systems.
BRJGRIZZ ITT Red Jacket Water Products GRIZZLY Features n Nylon impact and corrosion resistant discharge head and motor adapter. n Pump shell constructed with a press and roll process for better performance.
More informationEFQT/EFQU. EBARA Self Priming Trash Pump Selection Chart - EFQT. Project: Model: Chk d: Date: Model EFQT Selection chart
Selection Chart - EFQT Project: Model: Chk d: Date: Model EFQT Selection chart TDH m ft 42 140 36 120 30 100 24 80 18 60 EFQT2 EFQT3 EFQT4 EFQT6 EFQT8 EFQT10 12 40 6 20 0 0 0 500 1000 1500 2000 2500 3000
More informationAquavar ABII TECHNICAL BROCHURE BAQUABII R2 VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII R2 * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS 1 and 2 HP, 1AB2 and 2AB2 Variable Speed Controllers 1AB2 and 2AB2 Prewired Pump/Controller
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More informationGENESYS 2x3x6 DESIGN AND FEATURES
BMC VS. RTM FOR MAKING PUMP PARTS GENESYS 2x3x6 PERFORMANCE CURVE Making industrial parts from a non metallic material has had a very interesting history. One of the very first manufacturing processes
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More informationANSI DIME. Engineered for EXTREME Reliability in Chemical Processes
Pat. No. 5,779,456 ANSI DIME Extreme situations call for extreme measures. Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump engineered for the utmost reliability in even the
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationNS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
More informationPRODUCT OBSOLETED 1Q16
VIKING HEAVY DUTY PUMPS FEATURES Section 6 Page 6. Issue C 9 SERIES 27 s Cutaway View (Packed Type) 60-200-280 GPM Sizes (36-45-64 m³/hr) Shown without over-pressure relief valve MECHANICAL SEAL (SERIES
More informationITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity
Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered
More informationDrive Motor Type 3 (115/230V, 1 Phase TEFC) Motor Type 4 (230/460V, 3 Phase TEFC) Options Description Price Adders
PMU (Pump & Motor Unit) Prices 1000 4000 3000 Drive Motor Type 3 (115/230V, 1 Phase TEFC) Motor Type 4 (230/460V, 3 Phase TEFC) N HP 1725 rpm Consult Factory N/A L HP 1725 rpm Consult Factory Consult Factory
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More informationAPI 610 Vertical Multistage Pumps
API 60 Vertical Multistage Pumps Main Applications Sulzer API 60 Type VS and VS6 pumps are specified whenever limited Net Positive Suction Head (NPSH) is available, due to system constraints or liquids
More informationPumping Station. Marisa Handajani
Pumping Station Marisa Handajani Function To lift or to elevate the liquid from a lower elevation to an adequate height at which it can flow by gravity or overcome the hydrostatic head Applications: 1.
More informationAquaBoost. Variable Speed Constant Pressure Systems MODEL ABS
PRODUCT OVERVIEW The AquaBoost pump controller and complete booster package kits provide an economical answer for municipal water district customers with low water pressure. Both domestic and light commercial
More informationTC & FC SERIES CENTRIFUGAL PUMPS
TC & FC SERIES CENTRIFUGAL PUMPS Pro-Stainless Steel Series Centrifugal Pumps The Webtrol Pro-Stainless Steel Series Centrifugal are designed for dependable performance and rugged continuous duty service.
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationPump Analysis 1) Capacity - volume of liquid pumped per unit of time 2) Head
Pump Analysis 1) Capacity - volume of liquid pumped per unit of time 2) Head - several terms are used as shown in the attached Figures Static Suction Head, h s The difference in elevation between the suction
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationHead - m. Flow - US gpm. Comments. Customer : Contact : Re Cotizacion Metro Linea 4 EDB Project : Quote No. :
Customer : Project : Re Cotizacion Metro Linea 4 Page No : 3 Contact : Phone : Fax : Type: PVF - In-Line Close Coupled Fire Item : RCI Electrica Pump Model: Nom. Speed: 2950 RPM, 50 Hz Electric Impeller
More informationSB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,10,,20,32,45,64,90,120,0 series 1 2 3 4 5 6 7 8 9 at Nameplate information Mechanical Seal, Minimum inlet pressure - NPSHA Motor Data Max. Operating Pressure and Inlet Pressures Pumped
More informationSB,SBI,SBN 1,3,5,10,15,20,32,45,64,90,120,150 series
SB,SBI,SBN 1,3,5,,,,32,45,64,90,1,0 series 1 2 3 4 5 6 7 8 9 11 Nameplate information Mechanical Seal, Minimum inlet pressure NPSHA Motor Data Max Operating Pressure and Inlet Pressures Pumped Liquids
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More information3K111-3K193 3K361-3K393. 3K Series - Single Stage Stainless Steel End-Suction Centrifugal Pumps RPM Models RPM Models FEATURES
3K Series - Single Stage Stainless Steel End-Suction Centrifugal Pumps 34 RPM Models 3K-3K93 FEATURES 4SSL liquid-end construction offers corrosion resistance and increases operating life over typical
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationAermotor 4 SUBMERSIBLE PUMPS 35, 50, 75, 90 GPM A+ SUPER SUB Series stainless steel
A+ SUPER SUB Series stainless steel The A+ Super Sub Series Stainless Steel 4 Submersible Pumps deliver efficient and dependable performance even in rough, aggressive water. Heads to 640 feet and capabilities
More informationSUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationFAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934
FAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934 Section 932 Page 393 Supersedes Section 932 Page 393 Dated April 6 2.5 GPM 45 104 FJP-104-2.5 X900101 50 115.5 FJP-115.5-2.5 X900102 55 127
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM bronze pumps are ideal for use where corrosion resistant materials are required such as providing circulation on water-jacketed engines, pumping saline solutions as well as a variety
More informationRSV In-Line Vertical Multi-Stage, Ring Section Pumps
RSV In-Line Vertical Multi-Stage, Ring Section s Technical Specification Pages RSV In-Line Vertical Multi-Stage, Ring Section This page left intentionally blank. RSV In-Line Vertical Multi-Stage, Ring
More informationEngineers Without Borders
Engineers Without Borders Proposal No: JI12-02-07 04 Item No: ITEM 001 February 7, 2012 Attn: Adam MODEL:VIT-CATM Size:7CHC 10 Stage(s) QTY:1 Operating conditions SERVICE LIQUID LIQUID TYPE CAPACITY RATED
More informationPIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationNon-Submersible Pumps
BT4 Series Booster Pumps Cast Iron Features: Designed for boosting water pressure from a variety of sources including municipal and private water systems. Available with either cast iron or stainless steel
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationSERVICE THE GORMAN-RUPP COMPANY P.O. Box 1217 MANSFIELD, OH FX
GORMAN-RUPP AT YOUR SERVICE THE GORMAN-RUPP COMPANY P.O. Box MANSFIELD, OH. 90 9..0 FX 9.. EMAIL GRSALES@GORMANRUPP.COM How To Read Pump Performance Curves The subject of this bulletin covers the reading
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationBooster Pumps. Non-Submersible Pumps. BT4 Series. Cast Iron Features: Applications:
BT4 Series CSA ENC 3 COF CSA 3 C US CSA 18 UL 8 Applications: Boosting water pressure from either city mains or private water systems. Pressure washing buildings and floors. Poultry houses. Spray cooling
More informationSundyne. HMP-3000, HMP-5000 and HMP-7000 Integrally Geared Centrifugal Pumps
Sundyne HMP-3000, HMP-5000 and HMP-7000 Integrally Geared Centrifugal Pumps HMP Series 3000 5000 7000 Sundyne HMP For more than 50 years, Sundyne has lead the industry as a fluid handling technology innovator.
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationTECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 10SB & 18SB 5-18 GPM, ½ 1½ HP, 60 HZ SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-18SB R1 5SB, 7SB, 1SB & 18SB 5-18, ½ 1½ HP, 6 HZ SUBMERSIBLE PUMPS FEATURES Abrasive Handling Construction: Impellers designed with flat wearing surface which provides effective sand
More informationData sheet. KRTF /24XEG-S IE3 Version no.: 3. Operating data. Design. Driver, accessories
Data sheet Item no.: 100 Page: 1 / 5 Operating data Requested flow rate 178.00 US GPM Requested developed head 14.40 ft Pumped medium Water Clean water Not containing chemical and mechanical substances
More informationKS Pump Stations. Engineering Submittal Sheet. Installation Sets for Collectors
Engineering Submittal Sheet Installation Sets for Collectors Layout legend S Supply from collector to storage R Return from storage to collector 1 Ball valve with thermometer and integrated gravity break
More informationSpecifications. Ansimag KF Series Pumps for Chemical Process. Models: KF2110 KF31510 KF3210 KF4310 KF4310H KF6410
Specifications Ansimag KF Series Pumps for Chemical Process Models: KF2110 KF31510 KF3210 KF4310 KF4310H KF6410 English Original, September 2015 1 DESCRIPTION Sealless Horizontal, End Suction, Mag-drive
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationSELF-PRIMING, HIGH-EFFICIENCY PUMPS
SELF-PRIMING, HIGH-EFFICIENCY PUMPS GRpumps.com S U P E R U S E R I E S V A R I A T I O N S Super U Series pumps are available in 3", 4" and 6" discharge sizes. They are capable of handling spherical solids
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More information5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More information33GS, 40GS, 55GS, 60GS, 75GS & 80GS GPM, 1 10 HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B33-8GS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationMatrix_Techdata_SS_V14
Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance
More informationEVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More information