Standardimiskava 2009 aastaks

Size: px
Start display at page:

Download "Standardimiskava 2009 aastaks"

Transcription

1 Standardimiskava 2009 aastaks Lisa Kommunikatsiooniministri a. käskkirja nr. 429 juurde Jrk. nr. Standardi või standardi kavandi nimi Standardi tähis Ettepaneku esitaja Standardi koostaja 1 2 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation *EN-ISO 22005:2007 Guidance on statistical techniques for ISO 9001:2000 *ISO/TR 10017: Autokütused. Veeldatud naftagaasid. Nõuded ja katsemeetodid / Automotive fuels - LPG - Requirements and test methods *EN 589: Autokütused. Pliivaba bensiin. Nõuded ja katsemeetodid / Automotive fuels - Unleaded petrol - Requirements and test methods *EN 228: Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods *EN 15376: Gas supply systems Pipelines for maximum operating pressure over 16 bar Functional requirements *pren 1594:2008 Katsetamisgaasid. Proovirõhud. Tarvitite kategooriad / Test gases - Test pressures - Appliance categories EN 437:2006/prA1:2008 LPG equipment and accessories Periodic inspection of transportable refillable LPG cylinders *EN 1440:2008 EVS/TK 33 EVS/TK 33 EVS/TK 37 EVS/TK 37 EVS/TK 37 Gaasiliit Gaasiliit Gaasiliit

2 LPG equipment and accessories Procedure for checking LPG cylinders before, during and after filling *EN 1439:2008 Information technology - Security techniques - Information security risk management *ISO/IEC 27005:2008 Corporate governance of information technology *ISO/IEC 38500: Informatsioon ja dokumentatsioon Haldusdokumendid. Tööprotsesside analüüs / Information and documentation Work process analysis for records *ISO/TR 26122: 2008 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure *EN 15528: Safety rules for the construction and installations of lifts. Particular applications for passenger and good passengers lifts. Part 70: Accessibility to lifts for persons including persons with disability *EN 81-70:2003+A1: Elamute ja teiste EN käsitlusalast välja jäävate hoonete sprinklersüsteemid (Briti standardi BS 9251:2005 alusel) **EVS Milk and milk products - Guidance on sampling *EN ISO 707: Betooni täitematerjalid Ehitustöödel ja tee-ehituses sidumata kujul ja hüdrauliliselt seotuna kasutatavad täitematerjalid *EN 12620:2002+A1:2008 *EN 13242:2002+A1:2007 Ehituslikud soojusisolatsioonitooted. Tööstuslikult valmistatud vahtpolüstüreentooted (EPS). Spetsifikatsioon *pren Gaasiliit EVS/TK 04 EVS/TK 04 EVS/TK 22 EVS/TK 16 EVS/TK 16 EVS/TK 05 EVS/TK 01 EVS/TK 09 EVS/TK 09 EETL

3 20 Ehitiste soojaisolatsioonitooted. Tööstuslikult valmistatud mineraalvilla (MW) tooted. Spetsifikatsioon *pren Thermal insulation - Vocabulary *EN ISO 9229: Kipssideained ja kipsmördi kuivsegud. Osa 1: Määratlused ja nõuded *EN : Müüritarvikute spetsifikatsioonid. Osa 1: Müüriankrud, tõmbelindid, talakingad ja konsoolid *EN 845-1:2003+A1: Müüritarvikute spetsifikatsioonid. Osa 3: Sängitusvuugi terassarrusvõrgud *EN 845-3:2003+A1:2008 Lehtmetallist katusetooted. Isekandvate lehtterasest, alumiiniumist ja roostevabast lehtterasest valmistatud toodete spetsifikatsioon. Osa 1: Teras *EN 508-1:2008 Tööstus-, kommerts- ning garaažiuksed ja -väravad. Paigaldamine ja kasutamine 27 Ehitusklaas. Isolatsioonklaasi plokid. Osa 1: Üldnäitajad, mõõtelised lubatud kõrvalekalded ja süsteemide kirjeldamise eeskirjad 28 Betoonvalmistooted. Õõnespaneelid 29 Ehitusklaas. Klaaspaketid. Osa 5: Vastavushindamine 30 *EN 12635:2002+A1 *EN :2004 (+AC:2006) *EN 1168:2005+A1:2008(+prA 2) *EN :2005+A1:2008 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values *EN ISO 10456:2007 EETL EETL EVS/TK 18 EVS/TK 18 EVS/TK 18 EVS/TK 20 EVS/TK 15 EVS/TK 15 EVS/TK 07 EVS/TK 15 EVS/TK 14

4 Ehitusmaterjalide soojaerijuhtivuse arvutusuuruse ja tarindite soojajuhtivuse arvutus **EVS Teras- ja alumiiniumkonstruktsioonide valmistamine. Osa 1: Kandeelementide vastavushindamine *EN :2008 Teraskonstruktsioonide ja alumiiniumkonstruktsioonide valmistamine - Osa 2: Tehnilised nõuded teraskonstruktsioonidele *EN : Sisekeskkonna lähteparameetrid hoonete energiatõhususe projekteerimiseks ja hindamiseks, lähtudes siseõhu kvaliteedist, soojuslikust mugavusest, valgustusest ja akustikast *EN 15251: Rahvuslik lisa standardile EN Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers Bituminous mixtures - Material specifications - Part 3: Soft Asphalt 39 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt 40 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt **EVS 1:2006/AC:2008 2:2006/AC:2008 3:2006/AC:2008 5:2006/AC:2008 6:2006/AC:2008 EVS/TK 14 EVS/TK 27 EVS/TK 27

5 41 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt 42 Road traffic noise reducing devices - Specifications 43 7:2006/AC:2008 *EN 14388:2005/AC:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 27: Sampling *EN : Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement *EN :2000+AC:2001 Fixed, vertical road traffic signs - Part 1: Fixed signs *EN : Fixed, vertical road traffic signs - Part 4: Factory production control *EN : Fixed, vertical road traffic signs - Part 5: Initial type testing *EN : Bitumen and bituminous binders - Sampling bituminous binders *EN 58: Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration *EN :2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density *EN :2002+A1:2007

6 51 52 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens *EN :2003+A1:2007 Bitumen and bituminous binders - Determination of needle penetration *EN 1426: Bitumen and bituminous binders - Determination of softening point - Ring and Ball method *EN 1427:2007 Ehituskonstruktsioonide koormused. Osa 4: Puiste- ja vedelikmahutite koormused *EN :2006 Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-6: Koorikkonstruktsioonide tugevus ja stabiilsus *EN Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-7: Tasapinnaliste konstruktsioonide projekteerimine, millele mõjuvad koormused pole samas tasapinnas *EN Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-11: Tõmbele töötavate elementidega konstruktsioonide projekteerimine *EN :2006 Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-12: Täiendavad reeglid standardi EN 1993 laiendamiseks kuni teraseni S700 *EN Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 4-1: Puistemahutid *EN Eurokoodeks 3 - Teraskonstruktsioonide projekteerimine. Osa 4-2: Vedelikumahutid *EN

7 61 Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 4-3: Torujuhtmed *EN Power transformers -- Part 6: Reactors *EN : Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems *EN :2004/A1:2006 EVS/TK 19 EVS/TK Low-voltage electrical installations -- Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control -- Clause 534: Devices for protection against overvoltages *HD : Low-voltage electrical installations -- Part 7-721: Requirements for special EVS/TK installations or locations - Electrical installations in caravans and motor caravans *FprHD : Low-voltage electrical installations -- Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways *prhd :2007 +praa: Madalpingevõrkudes kasutatavate seadmete isolatsiooni koordinatsioon. Osa 5: Üksikasjalik meetod enimalt 2 mm laiuste õhk- ja roomevahemike kindlaksmääramiseks *EN : Madalpingevõrkudes kasutatavate seadmete isolatsiooni koordinatsioon. Osa 1: Põhimõtted, nõuded ja katsetused *EN :2007 Explosive atmospheres -- Part 14: Electrical installations design, selection and erection Kinnisvara korrashoid. Kinnisvarakeskkonna korraldamine./ Maintenance of facilities. Provision of facilities management services. *EN :200X **EVS EVS/TK 36

8 Postal services - Quality of service - Measurement of the transit time of end-toend services for single piece priority mail and first class mail Safety of toys - Part 1: Mechanical and physical properties (CONSOLIDATED TEXT) Safety of toys - Part 2: Flammability (CONSOLIDATED TEXT) Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use *EN 13850:2002+A1:2008kons *EN 71-1:2005+A6:2008 *EN 71-2:2005+A1:2007 *EN 71-8:2003+A2:2005+A1:2006 Mänguväljaku seadmed. Osa 1: Üldised ohutusnõuded ja katsemeetodid / Playground equipment and surfacing - Part 1: General safety requirements and test methods *EN :2008 EVS/TK Mänguväljaku seadmed. Osa 2: Täiendavad spetsiaalsed ohutusnõuded ja katsemeetodid kiikede jaoks / Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings *EN : Mänguväljaku seadmed. Osa 3: Täiendavad spetsiaalsed ohutusnõuded ja katsemeetodid liumägede jaoks / Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides *EN : Mänguväljaku seadmed. Osa 4: Täiendavad spetsiaalsed ohutusnõuded ja katsemeetodid kiirusradade jaoks / Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways *EN : Ühekordselt kasutatavad meditsiinilised kindad. Osa 2: Nõuded füüsikalistele omadustele ja katsetamine (Medical gloves for single use - Part 2: Requirements and testing for physical properties) *pren 455-2: Detailplaneering ja rajatise ehitusprojekt. Jooniste vormistamine ja projektdokumentatsiooni koosseis köidetes. **EVS EVS/TK 11 Eesti Projektbüroode Liit

9 81 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances / Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for nonroomsealed heating appliances *EN Masinate ohutus. Minimaalsed vahekaugused vältimaks inimese kehaosade muljumisohtu KONSOLIDEERITUD TEKST / Safety of machinery - Minimum gaps to avoid crushing of parts of the human body CONSOLIDATED TEXT *EN 349:1998+A1: *EN : Water meters Part 1: General requirements A1: *EN : Water meters Part 2: Installation and condition of use A1: *EN : Water meters Part 3: Test methods and equipment A1: Metroloogia. Terminid ja määratlused 87 **EVS 758:1998 uustöötlus Hoonete projekteerimise, haldamise ja hooldusteenuste kontrollimise kriteeriumid/criteria for design, management and control of maintenance services for buildings *CEN/TS 15331: Kinnisvara korrashoid. Osa 2: Juhised kinnisvara korrashoiu lepingute ettevalmistamiseks/ Facility Management - Part 2: Guidance on how to prepare Facility Management agreements *EN : Kinnisvara korrashoid. Osa 1: Terminid ja määratlused/ Facility Management - Part 1: Terms and definitions *EN : Graphical symbols for use on equipment. Index and synopsis ISO 7000: Graphical symbols. Safety colours and safety signs. Part 1: Design principles for safety signs in workplaces and public areas ISO :2002 EVS/TK 32 EVS/TK 23 EVS/TK 36 EVS/TK 36 EVS/TK 36

10 92 Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management ISO/IEC : Systems and software engineering - System life cycle processes ISO/IEC 15288: Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination *EN ISO 8261:2001 Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures *EN 13251:2000+A1:2005 Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays *EN 15381:2008 EVS/TK Mänguväljaku seadmed. Osa 5: Täiendavad spetsiaalsed ohutusnõuded ja katsemeetodid karussellidele / Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels *EN :2008 Mänguväljaku seadmed. Osa 6: Täiendavad spetsiaalsed ohutusnõuded ja katsemeetodid õõtsumisvahendite jaoks / Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment *EN :2008 Mänguväljaku seadmed. Osa 7: Juhised paigaldamise, kontrollimise, hooldamise ja kasutamise kohta / Playground equipment and surfacing - Part 7: Guidance on installation, in-spection, maintenance and operation *EN :2008 Explosive atmospheres -- Part 14: Electrical installations design, selection and erection *EN :2008

11 Keskkonnajuhtimissüsteemid. Üldised juhtnöörid põhimõtete, süsteemide ja abivahendite kohta/environmental management systems - General guidelines on principles, systems and supporting techniques *ISO 14004:2004 Informatsioon ja dokumentatsioon Raamatute, ajalehtede ja teiste jadaväljaannete ning elektrooniliste väljaannete trüki- ja levitamise statistika Information and documentation Statistics on the production and distribution of books, newspapers, periodi *ISO 9707: 2008 Keskkonnaministe erium EVS/TK 33 Kultuuriministeeri um EVS/TK 22, projekti juht Rahvusraamatukogu standardi avaldamine ümbertrüki meetodil * standardi või publikatsiooni avaldamine tõlkemeetodil ** algupärase standardi koostamine

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Rough Hey Road Grimsargh Preston PR2

More information

Mattest (Ireland) Ltd

Mattest (Ireland) Ltd Unit 2, Northwest Business Park, Ballycoolin, Dublin 15 Testing Laboratory Registration number: 286T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing

More information

The European Standards for Asphalt

The European Standards for Asphalt The European Standards for Asphalt August 007 Venue Briefing Speakers Company B510/ 1 / 1 QPA Representatives WELCOME Bob Allen John Bradshaw-Bullock John Harris John Lay Colin Loveday Malcolm Simms (Secretariat)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-34:2004+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test KONSOLIDEERITUD TEKST Bituminous mixtures - Test methods for hot mix asphalt

More information

SAINT LUCIA NATIONAL STANDARDS

SAINT LUCIA NATIONAL STANDARDS SAINT LUCIA NATIONAL STANDARDS CODE STANDARD Pages Class Hard Copy (ECD) PDF Copy (ECD) *SLNS 1 : 1992 Specification for Margarine & Cooking Margarine *SLNS 2 : 1992 Specification for Shortening 12 B 30

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-2:2003+A1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution KONSOLIDEERITUD TEKST Bituminous mixtures - Test method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor KONSOLIDEERITUD TEKST Bituminous

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 9386-2 First edition 2000-11-01 Power-operated lifting platforms for persons with impaired mobility Rules for safety, dimensions and functional operation Part 2: Powered stairlifts

More information

Mattest (Ireland) Ltd

Mattest (Ireland) Ltd Unit 18 University Hall, Sarsfield Road, Wilton, Cork Registration number: 289T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration

More information

Applicable standards in TSI relating to persons with reduced mobility in the trans-european conventional and high-speed rail system (2008/164/EC)

Applicable standards in TSI relating to persons with reduced mobility in the trans-european conventional and high-speed rail system (2008/164/EC) Applicable standards in TSI relating to persons with reduced mobility in the trans-european conventional and high-speed rail system (2008/164/EC) ERA 1.0 Page 1/5 Standards or other documents referred

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-30:2004+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor KONSOLIDEERITUD TEKST Bituminous mixtures - Test methods

More information

EN-painelaitestandardien tilannekatsaus

EN-painelaitestandardien tilannekatsaus 1 (9) EN-painelaitestandardien tilannekatsaus Teknisten komiteoiden CEN/TC 54, 74, 267, 268, 269 ja 342 julkaisut ja työkohteet. Keltaisella on merkitty viime tilannekatsaukseen nähden muuttuneet tiedot.

More information

What s going on with European Specifications?

What s going on with European Specifications? What s going on with European Specifications? Jean-Pascal PLANCHE - Total Sept. 15-16, 2003, Las Vegas eurobitume Outline Process of European standardization Current specifications Need for changes CEN/TC336

More information

EN-painelaitestandardien tilannekatsaus

EN-painelaitestandardien tilannekatsaus 1 (10) EN-painelaitestandardien tilannekatsaus Teknisten komiteoiden CEN/TC 54, 74, 267, 268, 269 ja 342 julkaisut ja työkohteet. Keltaisella on merkitty viime tilannekatsaukseen (18.4.2018) nähden muuttuneet

More information

DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)

DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage) Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall

More information

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)

SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60470 Second edition 1999-10 High-voltage alternating current contactors and contactor-based motor-starters Contacteurs pour courants alternatifs haute tension et démarreurs

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1550:1999 Tööpinkide ohutus. Töödeldava eseme kinnitusrakiste projekteerimise ja ehitamise ohutusnõuded Machine-tools safety - Safety requirements for the design and construction

More information

Table 3:List of Mandatory Omani Standards

Table 3:List of Mandatory Omani Standards 2/3/1978 6/99 1/1977 - Precast concrete blocks 2/1982 - Aggregates from natural sources for concrete 3/1977 777/1997 Cement flooring tiles and wood base materials 4/1978 - Building sands from natural sources.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13802:2004 Railway applications - Suspension components - Hydraulic dampers Railway applications - Suspension components - Hydraulic dampers EESTI STANDARDIKESKUS EESTI STANDARDI

More information

LIST OF PUBLISHED STANDARDS

LIST OF PUBLISHED STANDARDS Report : 08-05-0 Page o : Of 5 LIST OF PUBLISHED STDRDS umber SS umber pproved mendment SBS/TC 09 SS 08:0.0 The design and installation of compressed natural gas (CG) vehicle filling stations 0-0-0 0-0-0

More information

Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018

Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018 Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018 Non-residential Buildings Questions and Answers Provided on December 19, 2017 This document

More information

Latest publications September 2013

Latest publications September 2013 Latest publications September 2013 'Latest publications' lists the European Standards (EN), CEN Workshop Agreements (CWA), CEN Technical Specifications (CEN/TS) and CEN Technical Reports (CEN/TR) that

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of

More information

TS 2010 PRODUCT PROPOSAL TAIT STAGE 1

TS 2010 PRODUCT PROPOSAL TAIT STAGE 1 Date of Issue: 16.05.2013 Leiths (Scotland) Ltd Rigifa Cove Aberdeen AB12 3LR TS 2010 PRODUCT PROPOSAL TAIT STAGE 1 Laboratory Validation Of Necessary Properties Mixing Plant: Blackhills Quarry, Cove,

More information

Code of Practice 1 Part 2 : 2000 Amendment 1

Code of Practice 1 Part 2 : 2000 Amendment 1 Code of Practice 1 Part 2 : 2000 Amendment 1 January 2003 Explanatory notes: UKLPG is the voice on LPG in the UK, representing companies who are producers, distributors, equipment and service providers,

More information

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( )

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( ) Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 (2382-18) March 2018 Version 1.0 FAQs 1 18 th Edition IET Wiring Regulations 2018 FAQs When will the 18 th Edition of BS 7671

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance

More information

Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018

Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018 Technical Support for Electric Vehicle Charging Requirements in the Building Code that are in effect January 1, 2018 Houses Questions and Answers Provided on December 19, 2017 This document is intended

More information

ISO 1716 INTERNATIONAL STANDARD. Reaction to fire tests for building products Determination of the heat of combustion

ISO 1716 INTERNATIONAL STANDARD. Reaction to fire tests for building products Determination of the heat of combustion INTERNATIONAL STANDARD ISO 1716 Second edition 2002-02-01 Reaction to fire tests for building products Determination of the heat of combustion Essais de réaction au feu des produits de construction Détermination

More information

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS

EVS-EN 13953:2003+A1:2007 This document is a preview generated by EVS EESTI STANDARD EVS-EN 13953:2003+A1:2007 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) (KONSOLIDEERITUD TEKST) LPG equipment

More information

Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt

Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt CEN/TC 227 Date: Version 3.6 28-6-2012 pren 13108-4 CEN/TC 227 Secretariat: DIN Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt Asphaltmischgut Mischgutanforderungen Teil 4: Hot

More information

English version. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test

English version. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12697-34 June 2004 ICS 93.080.20 English version Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test Mélanges bitumineux

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 12405-3 First edition 2014-05-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements

More information

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA)

MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA) MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR PAVEMENT RIDE QUALITY (MEAN ROUGHNESS INDEX ACCEPTANCE CRITERIA) CFS:TEH 1 of 10 APPR:KPK:JFS:07-07-16 FHWA:APPR:07-15-16 a. Description. This

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14839-4 First edition 2012-03-15 Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 4: Technical guidelines Vibrations mécaniques

More information

SEAUPG 2009 CONFERENCE-HILTON HEAD ISLAND, SOUTH CAROLINA

SEAUPG 2009 CONFERENCE-HILTON HEAD ISLAND, SOUTH CAROLINA SEAUPG 9 CONFERENCE-HILTON HEAD ISLAND, SOUTH CAROLINA Update on the Texas Overlay Tester Tom Scullion TTI Hamburg Wheel Tracking Device Overlay Tester Presentation Overview Background Initial Validation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites

More information

ISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge

ISO INTERNATIONAL STANDARD. Road vehicles Test methods for electrical disturbances from electrostatic discharge INTERNATIONAL STANDARD ISO 10605 First edition 2001-12-15 Road vehicles Test methods for electrical disturbances from electrostatic discharge Véhicules routiers Méthodes d'essai des perturbations électriques

More information

Economic and Social Council

Economic and Social Council United Nations Economic and Social Council Distr.: General 6 June 2018 English Original: English and French Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 14990-1 First edition 2016-11-01 Earth-moving machinery Electrical safety of machines utilizing electric drives and related components and systems Part 1: General requirements

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12697-34:2012 Asfaltsegud. Kuuma asfaltsegu katsemeetodid. Osa 34 : Marshalli katse Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test EESTI STANDARDI

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 7176-21 Second edition 2009-04-01 Wheelchairs Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14066:2003 Natural stone test methods - Determination of resistance to ageing by thermal shock Natural stone test methods - Determination of resistance to ageing by thermal shock

More information

ELECTRIC RATE SCHEDULES ROCKY MOUNTAIN POWER. Salt Lake City, Utah. for ELECTRIC SERVICE. in the STATE OF UTAH. Under

ELECTRIC RATE SCHEDULES ROCKY MOUNTAIN POWER. Salt Lake City, Utah. for ELECTRIC SERVICE. in the STATE OF UTAH. Under Original Sheet No. A ELECTRIC RATE SCHEDULES of ROCKY MOUNTAIN POWER Salt Lake City, Utah for ELECTRIC SERVICE in the Under PUBLIC SERVICE COMMISSION OF UTAH TARIFF NO. 50 CANCELS ALL PREVIOUS SCHEDULES

More information

An Explosive Situation. Definitions

An Explosive Situation. Definitions An Explosive Situation Explosions due to flame arrester failures are destructive, expensive and potentially deadly. Prior to 1989, no arrester provided protection against all types of flame propagation.

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61325 First edition 1995-03 Insulators for overhead lines with a nominal voltage above 1 000 V Ceramic or glass insulator units for d.c. systems Definitions, test methods and

More information

ISO 3934 INTERNATIONAL STANDARD

ISO 3934 INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 3934 Second edition 2002-09-01 Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods Caoutchouc vulcanisé et

More information

The Use of Milled Bituminous Material in Capping Layer A Case Study

The Use of Milled Bituminous Material in Capping Layer A Case Study The Use of Milled Bituminous Material in The Use of Milled Bituminous Material in Fung, Eduardo - COBA, S.A. Baptista, Teresa - ALBERTO COUTO ALVES, S.A. Quintão, António - COBA, S.A. 1 INTRODUCTION 2

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 12697-44:2010 sisaldab

More information

Major changes within the New 18 th Edition Wiring Regulations announced by The IET

Major changes within the New 18 th Edition Wiring Regulations announced by The IET Major changes within the New 18 th Edition Wiring Regulations announced by The IET BS 7671:2018 Requirements for Electrical Installations will be issued on 2 nd July 2018 and is intended to come into effect

More information

Geoscience Testing laboratory (Al Ain)

Geoscience Testing laboratory (Al Ain) Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship

More information

Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons TOTAL CAPACITY 1400 GALLONS

Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons Depth Gallons TOTAL CAPACITY 1400 GALLONS CALIBRATION CHART FOR TANK NO. DOT 2266 TYPE OF TANK: Distributer OWNER: John C. Hipp Const. Equip. Co. P.P.Box 1000 Alachua, Fla. 32615 MAKE OF TANK: Rosco SERIAL NO.: 6295 COMPARTMENTS: one OVERALL LENGTH:

More information

Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear

Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear Circuit-Breaker www.siemens.com/energy Switchgear Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear s Technology Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under

More information

2017 SGS ACADEMY MALAYSIA PUBLIC TRAINING SCHEDULE

2017 SGS ACADEMY MALAYSIA PUBLIC TRAINING SCHEDULE SGS Always Provide experts who are real practitioners in their professional fields as tutors and facilitators. We constantly review, monitor and evaluate our training courses to ensure they are relevant,

More information

DMS-9203, Asphaltic Concrete Patching Material (Containerized)

DMS-9203, Asphaltic Concrete Patching Material (Containerized) Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.

More information

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems

ISO INTERNATIONAL STANDARD. Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems INTERNATIONAL STANDARD ISO 26867 First edition 2009-07-01 Road vehicles Brake lining friction materials Friction behaviour assessment for automotive brake systems Véhicules routiers Matériaux de friction

More information

MATERIALS AND EQUIPMENT STANDARD FOR COAL TAR ENAMEL (HOT APPLIED) ORIGINAL EDITION MAY 1993

MATERIALS AND EQUIPMENT STANDARD FOR COAL TAR ENAMEL (HOT APPLIED) ORIGINAL EDITION MAY 1993 MATERIALS AND EQUIPMENT STANDARD FOR COAL TAR ENAMEL (HOT APPLIED) ORIGINAL EDITION MAY 1993 This standard specification is reviewed and updated by the relevant technical committee on Jan. 1999(1) and

More information

ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements

ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 21069-1 First edition 2004-11-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic

More information

Maine Turnpike Authority

Maine Turnpike Authority Company Name Total Bid Amount Liddell Brothers, Inc. - Halifax, MA $1,590,213.00 Northeast Traffic Control Services, Inc. - Plymouth, MA $1,932,117.00 Page 1 of 5 Liddell Brothers, Inc. Halifax, MA 202.2061

More information

ISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method

ISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference

More information

RESOLUTION MSC.286(86) (adopted on 5 June 2009) RECOMMENDATIONS FOR MATERIAL SAFETY DATA SHEETS (MSDS) FOR MARPOL ANNEX I OIL CARGO AND OIL FUEL

RESOLUTION MSC.286(86) (adopted on 5 June 2009) RECOMMENDATIONS FOR MATERIAL SAFETY DATA SHEETS (MSDS) FOR MARPOL ANNEX I OIL CARGO AND OIL FUEL MSC 86/26/Add.1 RESOLUTION MSC.286(86) SHEETS (MSDS) FOR MARPOL ANNEX I OIL CARGO AND OIL FUEL THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention on the International Maritime Organization

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation

More information

SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL

SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL A5EE-151 SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL Ali Ehsan Nazarbeygi 1, Ali Reza Moeini 2 1 Bitumen and Road Construction Department, Research Institute of Petroleum Industry

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10542-2 First edition 2001-07-15 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 2: Four-point strap-type

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 50272-3:2003 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries Safety requirements for secondary batteries and battery installations

More information

Mechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0.

Mechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0. Mechanical Series All industrial facilities use mechanical equipment in one form or another. Although the types of mechanical equipment can run the gamut from simple open/close valves to ultra complex

More information

printimiseks 2008 reporting template estonia.xls

printimiseks 2008 reporting template estonia.xls Introduction 28.06.2009 1 of 48 Introduction 28.06.2009 2 of 48 Methods&Limits Directive 98/70/EC: Test Methods, Limit Values and Tolerance Limits* *Based on information provided by the Belgium, the German

More information

Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)

Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized) Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type

More information

ISO Rules Part 500 Facilities Division 502 Technical Requirements Section Interconnected Electric System Protection Requirements

ISO Rules Part 500 Facilities Division 502 Technical Requirements Section Interconnected Electric System Protection Requirements Applicability 1 Section 502.3 applies to: the legal owner of a generating unit directly connected to the transmission system with a maximum authorized real power rating greater than 18 MW; the legal owner

More information

USES FOR RECYCLED OIL

USES FOR RECYCLED OIL USES FOR RECYCLED OIL What happens to your recycled used oil? Used oil, or 'sump oil' as it is sometimes called, should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ

More information

Multi-Mover Charger for model L25

Multi-Mover Charger for model L25 Multi-Mover Charger for model L25 Important safety instruction. Keep these instructions. This manual contains important instructions for the safety of the user and the operation of the device. 1. SYMBOLS

More information

Track Circuit Assister Configuration for Rail Vehicles

Track Circuit Assister Configuration for Rail Vehicles Track Circuit Assister Configuration for Rail Synopsis This Standard mandates where TCAs shall be fitted onto a vehicle and how they shall be set up. It also contains the requirements for testing a TCA.

More information

E/ECE/324/Rev.1/Add.84/Amend.5 E/ECE/TRANS/505/Rev.1/Add.84/Amend.5

E/ECE/324/Rev.1/Add.84/Amend.5 E/ECE/TRANS/505/Rev.1/Add.84/Amend.5 10 May 2010 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONSFOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1232:1999 Töökeskkonna õhu kvaliteet. Pumbad keemiliste toimeainete individuaalseks proovivõtmiseks. Nõuded ja katsemeetodid Workplace atmospheres - Pumps for personal sampling of

More information

Describe Flame Arrestor Operation and Maintenance Human Development Consultants Ltd.

Describe Flame Arrestor Operation and Maintenance Human Development Consultants Ltd. Training Module Describe Flame Arrestor Operation and Maintenance Human Development HDC Human Development All rights reserved. No part of this publication may be copied, reproduced, stored in a computer

More information

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act Government Notice No... of 2016 THE ENERGY EFFICIENCY ACT Regulations made by the Minister under section 23 of the Energy Efficiency Act 1. These regulations may be cited as the Energy Efficiency (Labelling

More information

Installation manual. Modbus Interface DIII EKMBDXA7V1. Installation manual Modbus Interface DIII. English

Installation manual. Modbus Interface DIII EKMBDXA7V1. Installation manual Modbus Interface DIII. English Modbus Interface DIII EKMBDXA7V1 Modbus Interface DIII English 379 mm 0 C 100 mm 50 mm 50 mm 40 mm 87 mm 300 mm IP X0 50 mm 60 C 365 mm 124 mm Max. 100 mm Min. 1 2 3 1 www.daikineurope.com/support-and-manuals/product-information/

More information

AL BADI TRADING OIL & GAS PRODUCTS LLC

AL BADI TRADING OIL & GAS PRODUCTS LLC OIL & GAS PRODUCTS LLC AB TRADING COMPANY PROFILE WWW.ALBADIGROUP.COM 2018 Contents 03 Mission & Vision BUSINESS MODEL 04 Chairman s Message BUSINESS ACTIVITIES 05 PRODUCTS 06 PETROLEUM ACTIVITIES 07 TRADING

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Bootham Lane Industrial Estate Bootham Lane Dunscroft Doncaster

More information

Item 1: Contents of the complete training & CV of the lecturer

Item 1: Contents of the complete training & CV of the lecturer Course DESIGN CONCEPTS + software SwitchgearDesign for SWITCHGEAR, SWITCHBOARDS, BUSDUCTS & SUBSTATIONS" Item 1: Contents of the complete training & CV of the lecturer Presented by Sergio Feitoza Costa

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14522:2005 Gaaside ja aurude isesüttimistemperatuuri määramine Determination of the auto ignition temperature of gases and vapours EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60269-1 Edition 3.1 2005-04 Edition 3:1998 consolidated with amendment 1:2005 Low-voltage fuses Part 1: General requirements IEC 2005 Copyright - all rights reserved No part

More information

Operating Instructions Inline Detonation Flame Arrester and

Operating Instructions Inline Detonation Flame Arrester and Operating Instructions Inline Detonation Flame Arrester 1002-0008 and 1002-0009 0102 PTB 04 ATEX 4003 X IIG IIB3 Issue : 27.11.2007 Page 1 of 7 1. Preface These operating instructions apply to inline detonation

More information

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur DEPARTMENT OF CIVIL ENGINEERING SUBJECT NAME: HIGHWAY ENGINEERING

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur DEPARTMENT OF CIVIL ENGINEERING SUBJECT NAME: HIGHWAY ENGINEERING VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF CIVIL ENGINEERING SUBJECT CODE: CE6504 SUBJECT NAME: HIGHWAY ENGINEERING YEAR: III SEM : V QUESTION BANK (As per Anna University

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy

More information

Group Class Code Listing

Group Class Code Listing Group Class Code Listing 1000 Automotive; Parts, Components, Vehicles 1160 Surplus - Bus & Bus Parts 1010 Automotive Parts 1200 Trolleys; Parts, Components 1020 Automotive - Testing Equipment 1202 Trolley

More information

ZX1.5-R. Gas-insulated medium voltage for railway application DISTRIBUTION SOLUTIONS. Gas-insulated medium voltage for railway application ZX1.

ZX1.5-R. Gas-insulated medium voltage for railway application DISTRIBUTION SOLUTIONS. Gas-insulated medium voltage for railway application ZX1. DISTRIBUTION SOLUTIONS ZX1.5-R Gas-insulated medium voltage for railway application Safety and reliability 20% footprint saving Easy operation Complete solution ZX1.5-R Gas-insulated medium voltage for

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements à aiguilles, séries

More information

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3

Annex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3 Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:

More information

ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL

ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL PROVINCE OF BRITISH COLUMBIA ORDER OF THE LIEUTENANT GOVERNOR IN COUNCIL Order in Council No. 392, Approved and Ordered October 13, 2017 Executive Council Chambers, Victoria On the recommendation of the

More information