*ARMY TM HR AIR FORCE TO 36A12-1A

Transcription

1 *ARMY TM HR AIR FORCE TO 36A12-1A HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL) FOR TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113 ( ) (EIC: B6B); TRUCK, UTILITY: UP-ARMORED CARRIER, 4X4, M1114 ( ) (EIC: B6C); TRUCK, UTILITY: EXPANDED CAPACITY, ARMAMENT CARRIER, M1151 ( ) (EIC: BA5); TRUCK, UTILITY: EXPANDED CAPACITY, ARMAMENT CARRIER, IAP/ARMOR READY, M1151A1 ( ) (EIC: BEG); TRUCK, UTILITY: EXPANDED CAPACITY, ENHANCED, M1152 ( ) (EIC: BA6); TRUCK, UTILITY: EXPANDED CAPACITY, ENHANCED, IAP/ARMOR READY, M1152A1 ( ) (EIC: BEH); TRUCK, UTILITY: COMMAND AND CONTROL/GENERAL PURPOSE VEHICLE, M1165 ( ) (EIC: BEK); TRUCK, UTILITY: COMMAND AND CONTROL/GENERAL PURPOSE VEHICLE, IAP/ARMOR READY, M1165A1 ( ) (EIC: BEJ); TRUCK, UTILITY: EXPANDED CAPACITY, TOW ITAS, CARRIER, M1167 ( ). *Supersedes TM HR, 24 February 2006 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. HEADQUARTERS, DEPARTMENTS OF THE ARMY AND THE AIR FORCE JUNE 2009

2

3 TM HR LIST OF EFFECTIVE PAGES Dates of issue for original and changed pages are: Original June 2009 TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 24 CONSISTING OF THE FOLLOWING: Page No. *Change No. A B blank i ii blank blank *Zero in this column indicates original page. A/(B blank)

4

5 *ARMY TM HR AIR FORCE TO 36A12-1A HAND RECEIPT TM HR TO 36A12-1A HEADQUARTERS DEPARTMENTS OF THE ARMY AND THE AIR FORCE WASHINGTON, D.C., 30 JUNE 2009 HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL) FOR TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113 ( ) (EIC: B6B); TRUCK, UTILITY: UP-ARMORED CARRIER, 4X4, M1114 ( ) (EIC: B6C); TRUCK, UTILITY: EXPANDED CAPACITY, ARMAMENT CARRIER, M1151 ( ) (EIC: BA5); TRUCK, UTILITY: EXPANDED CAPACITY, ARMAMENT CARRIER, IAP/ARMOR READY, M1151A1 ( ) (EIC: BEG); TRUCK, UTILITY: EXPANDED CAPACITY, ENHANCED, M1152 ( ) (EIC: BA6); TRUCK, UTILITY: EXPANDED CAPACITY, ENHANCED, IAP/ARMOR READY, M1152A1 ( ) (EIC: BEH); TRUCK, UTILITY: COMMAND AND CONTROL/GENERAL PURPOSE VEHICLE, M1165 ( ) (EIC: BEK); TRUCK, UTILITY: COMMAND AND CONTROL/GENERAL PURPOSE VEHICLE, IAP/ARMOR READY, M1165A1 ( ) (EIC: BEJ); TRUCK, UTILITY: EXPANDED CAPACITY, TOW ITAS, CARRIER, M1167 ( ). DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS You can help improve this publication. If you find any errors, or if you would like to recommend any improvements to the procedures in this publication, please let us know. The preferred method is to submit your DA Form 2028 (Recommended Changes to Publications and Blank Forms) through the Internet, on the Army Electronic Product Support (AEPS) website. The Internet address is The DA Form 2028 is located under the Public Applications section in the AEPS Public Home Page. Fill out the form and click on SUBMIT. Using this form on the AEPS will enable us to respond quicker to your comments and better manage the DA Form 2028 program. You may also mail, , or fax your comments or DA Form 2028 directly to the U.S. Army TACOM Life Cycle Management Command. The postal mail address is U.S. Army TACOM Life Cycle Management Command, ATTN: AMSTA-LC-LMPP / TECH PUBS, 1 Rock Island Arsenal, Rock Island, IL The address is tacomlcmc.daform2028@us.army.mil. The fax number is DSN or Commercial (309) TABLE OF CONTENTS Page Section I. Introduction Section II. Hand Receipt *Supersedes TM HR. 24 February i/(ii blank)

6

7 TM HR Section I. INTRODUCTION 1. SCOPE. This publication provides an overprinted DA Form 2062 (Hand Receipt) which lists the contents of Components of End Item (COEI), Basic Issue Items (BII), and Additional Authorization List (AAL) items related to M1113/M1114/M1151/M1151A1/M1152/M1152A1/M1165A1/M1167 vehicles. 2. GENERAL. a. Section II is the overprinted DA Form 2062 which lists the line item entry for system/end item and contents of COEI, BII, and AAL extracted from TM The listings consist of exactly the same items and are in the same sequence as those listings in TM b. The overprinted DA Form 2062 will eliminate manual preparation of the form and will assist organizations in inventorying and accounting for property as required by AR c. Local reproduction of the overprinted DA Form 2062 is authorized. However, organizations will comply with local policies in the reproduction of DA Form 2062 by office copying equipment, field printing plant, or duplicating plant facilities. d. Additional copies of this publication may be requisitioned from the U.S. Army Publications Distribution Center, 2800 Eastern Boulevard, Baltimore, MD , in accordance with chapter 12, AR EXPLANATION OF BLOCKS AND COLUMNS (DA FORM 2062). Refer to DA Pam , chapter 6, for additional information required to complete DA Form a. From. Enter the organization, unit, section, or squad which issues the property. b. To. Enter the Unit Identifier Code (UIC) and the hand receipt file number of the unit/personnel receiving the property. c. Hand Receipt Number. Enter a locally designated number. Use it to post the location of property in the property book. d. End Item Stock Number. Contains the National Stock Number (NSN) of the end item covered by the hand receipt. e. End Item Description. Contains the end item short title. f. Publication Number. Contains the TM number of the technical manual containing the operator/crew instructions for the equipment. g. Publication Date. Date of the operator/crew technical manual. h. Quantity. Quantity of the end item covered by this hand receipt. i. Stock Number (Column a). NSN of the item described. Item without stock number should be requisitioned by Commercial and Government Entity Code (CAGEC) and part number with exception data in accordance with AR j. Item Description (Column b). Describes the end item, including the make or model, and the serial/usa number, followed by item description of COEI, BII, and AAL items. In addition, it contains the five-digit CAGEC, Part Number (P/N), and Used On Code (UOC), if applicable. UOC, listed in the description column, identify which items are used on different models. Codes used in this hand receipt are: USED ON CODE MODEL (Blank) XAA XBB TTT TTA UUU UUA UU1 UU2 TT1 All M1113 M1114 M1151 M1151A1 M1152 M1152A1 M1165 M1165A1 M

8 TM HR k. (Column c). The Accounting Requirements Code (ARC) is provided here. One of the following ARCs will apply: NOTE The ARC refers to property accountability, not the Recoverability Code (RC). The ARC and the RC are listed in the Army Master Data File (AMDF). (N) Nonexpendable: (D) Durable: (X) Expendable: Items not consumed in use, retaining their identity during use, and requiring that accountability be maintained throughout the life of the item. Nonconsumable components of sets, kits, outfits, and assemblages; all tools in Federal Supply Codes (FSCs) 5110, 5120, 5130, 5133, 5136, 5140, 5180, 5210, 5220, and 5280; and any other nonconsumable with a price in excess of $50.00 not already N. Items, regardless of type classification or price and which are consumed in use. Includes all class 9 repair parts and items not consumed in use which cost $50.00 or less and not already N or D. l. SEC (Column d). The Controlled Inventory Item Code (formerly SEC code) is entered here. This is a one-position code which indicates the security classification, security risks, or pilferage controls required for storage or transportation of assets. Order of precedence for assignment of codes is classified, sensitive, pilferable, or unclassified, as applicable. Codes applicable to this hand receipt are as follows: SEC CODE CONTROLLED INVENTORY ITEM CODE U UNCLASSIFIED PILFERABLE ITEMS. M Handtools and shop equipment. J Pilferable item, due to its size, shape and utility, which does not fall under one of the above catagories. Pilferage controls may be designated by the coding activity to items coded U (unclassified) by recoding the items to J. m. UI (Column e). Unit of Issue. Refer to AR and/or CDA Pam 18-1 (Catalog Data Activity) for explanation of abbreviations used in this column. n. QTY AUTH (Column f). The quantity authorized to be on hand, or part of the end item. o. Quantity (Column g). Actual quantity on hand. Subcolumns A through F are to be filled in by the receiving unit/personnel in accordance with DA Pam , chapter 6. p. Page of Pages. Contains page number and total number of pages for the COEI, BII, and AAL portions of the hand receipt. Hand receipt holder will initial each page number (only when two or more forms are involved). When hand receipt holders change, the old initials will be lined out and the new hand receipt holder will initial each page. 1-2

9 TM HR 4. AUTHORIZATION DOCUMENTS. a. Components of End Item (COEI) are authorized by the applicable Repair Parts and Special Tools List (RPSTL). b. Basic Issue Items (BII) are authorized by the applicable operator s manual. c. Additional Authorization List (AAL) items are authorized by the appropriate MTOE, TDA, CTA, or JTA authorization documents. 5. SPECIAL INFORMATION. Items coded (.) indicate information is not available. 1-3/(1-4 blank)

10

11 TM HR HAND RECEIPT/ANNEX XXXXXXXXXXXX NUMBER For use of this form, see DA PAM The proponent agency is ODCSLOG FROM TO HAND RECEIPT NUMBER FOR ANNEX/CR ONLY END ITEM STOCK NUMBER SEE SERIES BELOW END ITEM DESCRIPTION Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167. PUBLICATION NUMBER TM PUBLICATION DATE QUANTITY STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F Truck, Utility: S250 Shelter Carrier, M1113 XAA Truck, Utility: Up-Armored Carrier, M1114 XBB Truck, Utility: Expanded Capacity, TTT 1 Armament Carrier, M Truck, Utility: Expanded Capacity, Armament Carrier, TTA IAP/Armor Ready, M1151A Truck, Utility: Expanded Capacity, Enhanced, UUU 1 M Truck, Utility: Expanded Capacity, Enhanced, UUA IAP/Armor Ready, M1152A Truck, Utility: Command and Control/General UU1 Purpose Vehicle, M Truck, Utility: Command and Control/General UU2 Purpose Vehicle, IAP/Armor Ready, M1165A1 *WHEN USED AS A HAND RECEIPT, enter Hand Receipt Annex Number HAND RECEIPT FOR QUARTERS FURNITURE, enter Condition Codes HAND RECEIPT ANNEX/COMPONENTS RECEIPT, enter Accounting Requirements Code (ARC) PAGE 1 OF 8 PAGES FORM DA JAN EDITION OF JAN 58 IS OBSOLETE CURRENT AS OF 30 JUNE

12 TM HR TM HR Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167 STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F Truck, Utility: Expanded Capacity, TOW ITAS, TT1 Carrier, M1167 COMPONENTS OF END ITEM (COEI) BEARING, SLEEVE: pintle adapter (located in the armament mounting assembly) (19207) consisting of XBB N U EA a. Setscrew 3/8-24 (7X677) N U EA 4 N/A b. Pintle Adapter (19207) N U EA GUNNER SHIELD ASSEMBLY (19207) 57K4470 consisting of XBB EA 1 a. Screw (19207) X U EA b. Washer (24617) X U EA c. Shield, gunner (19207) X U EA d. Bracket, gun shield support (19207) X U EA e. Lockwasher, (19207) X U EA 8 f. Nut, (19207) X U EA g. Handle assembly, locking (19200) X U EA h. Screw (19205) X U EA i. Sleeve, split (19200) X U EA j. Pawl, clamping (19200) X U EA 1 Reverse of DA Form 2062 CURRENT AS OF 30 JUNE 2009 PAGE 2 OF 8 PAGES 2-2

13 TM HR HAND RECEIPT/ANNEX XXXXXXXXXXXX NUMBER For use of this form, see DA PAM The proponent agency is ODCSLOG FROM TO HAND RECEIPT NUMBER FOR ANNEX/CR ONLY END ITEM DESCRIPTION Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167. PUBLICATION NUMBER TM PUBLICATION DATE QUANTITY STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F COEI Continued k. Adapter, pintle (19207) X U EA 1 l. Screw (19207) X U EA 4 BASIC ISSUE ITEMS (BII) TM [in cotton duck pamphlet bag] EA 1 TM HR [in cotton duck pamphlet bag] EA BAG: jack and tools stowage, cotton duck, 13 in. x 23 in. x 9-1/2 in. (folded) (19207) X U EA BAG ASSEMBLY, PAMPHLET: cotton duck, 3 in. x 9-1/4 in. x 11-1/4 in. (19207) X U EA BAG, TOOL: cotton duck, 10 in. x 20 in., w/ flap (19207) X U EA 1 *WHEN USED AS A HAND RECEIPT, enter Hand Receipt Annex Number HAND RECEIPT FOR QUARTERS FURNITURE, enter Condition Codes HAND RECEIPT ANNEX/COMPONENTS RECEIPT, enter Accounting Requirements Code (ARC) PAGE 3 OF 8 PAGES FORM DA JAN EDITION OF JAN 58 IS OBSOLETE CURRENT AS OF 30 JUNE

14 TM HR TM HR Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167 STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F BII Continued EXTENSION, JACK HANDLE: jack, 15-1/2 in. long (19207) D M EA FIRST AID KIT, GENERAL PURPOSE 3 in. x 5-13/16 in. x 8-7/32 in. (19207) X U EA FIRE EXTINGUISHER: hand, type 1, class 2, size 5 (54905) N U EA FOLDER, EQUIPMENT RECORD: 2-1/2 in. x 8 in. x 10 in. (72094) X U EA HANDLE, MECHANICAL JACK: 18 in. long (19207) D U EA JACK, SCISSORS, HAND: mechanical, 3.5-ton cap., 6.33 in. closed to in. (max) open (19207) D M EA MAX TOOL KIT, COMBINATION TOOL, HAND: (19207) 57K3528 D M EA a. Carrying case (0T9K4) X U EA b. Ax (0T9K4) D M EA c. Ax sheath (0T9K4) X U EA d. Shovel attachment (0T9K4) D M EA e. Mattock attachment (0T9K4) D M EA f. Pick attachment (0T9K4) D M EA Reverse of DA Form 2062 CURRENT AS OF 30 JUNE 2009 PAGE 4 OF 8 PAGES 2-4

15 TM HR HAND RECEIPT/ANNEX XXXXXXXXXXXX NUMBER For use of this form, see DA PAM The proponent agency is ODCSLOG FROM TO HAND RECEIPT NUMBER FOR ANNEX/CR ONLY END ITEM DESCRIPTION Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167. PUBLICATION NUMBER TM PUBLICATION DATE QUANTITY STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F BII Continued g. Broad pick attachment (0T9K4) D M EA h. Rake hoe attachment (0T9K4) D U EA i. Rake hoe fastener (0T9K4) D U EA j. Safety locking pin (0T9K4) D U EA PLIERS, SLIP JOINT: combination, slip joint, straight nose w/cutter, 8 in. long, phosphate finish (19207) D M EA SCREWDRIVER, CROSS TIP: Phillips type, plastic handle, point no. 2, 7-1/2 in. long (19207) D M EA SCREWDRIVER, FLAT TIP: flared sides, plastic handle, round blade, 3/16 in. wide tip, 7-3/4 in. long (55719) SSDE-66 D M EA TUBE ASSEMBLY: (OGBZ7) N U EA WRENCH, ADJUSTABLE: open end, 8 in. long D M EA 1 (96906) MS WRENCH, RATCHET: 5/8 in., 3/4 in. hex socket, 1-1/8 in. (19207) D M EA 1 *WHEN USED AS A HAND RECEIPT, enter Hand Receipt Annex Number HAND RECEIPT FOR QUARTERS FURNITURE, enter Condition Codes HAND RECEIPT ANNEX/COMPONENTS RECEIPT, enter Accounting Requirements Code (ARC) PAGE 5 OF 8 PAGES FORM DA JAN EDITION OF JAN 58 IS OBSOLETE CURRENT AS OF 30 JUNE

16 TM HR TM HR Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167 STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F BII Continued WRENCH, WHEEL LUG: 1-15/ /64 in. socket dia., D M EA 1 1-3/16 in. socket depth, 17-1/2 in. long (11862) ADDITIONAL AUTHORIZATION LIST (AAL) ALARM: chemical agent, M8A1 (81361) EA-PRF-2058 N U EA BAG: pamphlet, cotton duck, 3 in. x 9-1/4 in. x 11-1/4 in. (19207) N U EA BAR: suspension tiedown (34623) XAA, UUU, UUA D M EA BLOCK: chock (96906) MS X U EA BLOCK: tackle (19207) D M EA BRACKET: support, decontaminating apparatus (19207) X U EA BRACKET: suspension tiedown XAA, UUU, UUA D U EA 2 (34623) BRACKET: water can (96906) MS TTT, TTA, UUU, UUA, UU1, UU2, TT1 X U EA CABLE, NATO SLAVE: intervehicular power cable, 12 ft long (19207) N U AY CAN: water, military, plastic, 5 gal. (81349) MIL-C X U EA 1 Reverse of DA Form 2062 CURRENT AS OF 30 JUNE 2009 PAGE 6 OF 8 PAGES 2-6

17 TM HR HAND RECEIPT/ANNEX XXXXXXXXXXXX NUMBER For use of this form, see DA PAM The proponent agency is ODCSLOG FROM TO HAND RECEIPT NUMBER FOR ANNEX/CR ONLY END ITEM DESCRIPTION Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167. PUBLICATION NUMBER TM PUBLICATION DATE QUANTITY STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F AAL Continued CHAIN: tire, 9/32 side x 1/4 cross link (34623) N M SET CHAIN: tow, 9/32 side x 12 ft long (19207) N U EA DECONTAMINATING APPARATUS: M-13 (81361) E N U EA DECONTAMINATION APPARATUS: TTT, TTA, UUU, UUA, UU1, UU2, TT1 N U EA 1 portable, DS-2, 1-1/2 UT, ABC-M11 w/bracket (81361) D FLASHLIGHT: 2 x 3-1/2, GFST x 8 in. (82214) 1259 X U EA GAUGE: tire pressure (19207) X U EA HANDLE, SOCKET WRENCH: TT1 D M EA 1 1/2 in. square drive reversible, 9 in. long (05047) B107.10M KEY, MACHINE: geared hub oil drainplug, straight bar key, 1/2 in. square, 2-1/2 in. long (96906) MS D M EA 1 *WHEN USED AS A HAND RECEIPT, enter Hand Receipt Annex Number HAND RECEIPT FOR QUARTERS FURNITURE, enter Condition Codes HAND RECEIPT ANNEX/COMPONENTS RECEIPT, enter Accounting Requirements Code (ARC) PAGE 7 OF 8 PAGES FORM DA JAN EDITION OF JAN 58 IS OBSOLETE CURRENT AS OF 30 JUNE

18 TM HR TM HR Truck, Shelter Carrier M1113/Up-Armored M1114/Truck, Armament Carrier M1151, Truck, Armament Carrier, IAP/Armor Ready M1151A1,Truck, Expanded Capacity M1152, Truck, Expanded Capacity, IAP/Armor Ready M1152A1, Truck, Command and Control M1165, Truck, Command and Control, IAP/Armor Ready M1165A1, Truck, TOW ITAS, Carrier M1167 STOCK NUMBER a. ITEM DESCRIPTION b. *c. SEC d. UI e. QTY AUTH f. g. QUANTITY A B C D E F AAL Continued PADLOCK SET: (96906) MS D U EA RADIO SET: 9 x 14 x 16 in. (80058) AN/GRC-160 N U EA SCREWDRIVER: flat tip, flared sides, plastic handle, round blade, 1/4 in. wide tip (80063) SCC D M EA SOCKET, SOCKET WRENCH: 1/2 in. square drive, 9/16 in. wrenching size, standard length, DM M EA 1 1/2 point, steel (2K880) SPOUT: can, gas, flexible with filter screen, 16 in. long (19207) D M EA TRAY: water can (19207) XBB X U EA TIRE: radial, 37 x 12.50R16.5LT (34623) X U EA TRIANGLES: folding, reflective (81348) RR-W-1817 X U SET TRIPOD MOUNT: w/cover, M3, mach. gun TTT, TTA (19204) UU1, UU2, TT1 N U EA TURNBUCKLE ASSY: suspension tiedown (34623) D U EA 1 N/A WHEEL AND RUNFLAT, RADIAL: (19207) X U EA WRENCH: open end, 1-1/8 in. x 18 in. long (34623) XAA, UUU, UUA D U EA 1 Reverse of DA Form 2062 CURRENT AS OF 30 JUNE 2009 PAGE 8 OF 8 PAGES 2-8

19 By Order of the Secretary of the Army: Official: GEORGE W. CASEY, JR. General, United States Army Chief of Staff JOYCE E. MORROW Administrative Assistant to the Secretary of the Army By Order of the Air Force: JOHN P. JUMPER General, United States Air Force Chief of Staff Official: GREGORY S. MARTIN General, United States Air Force Commander, Air Force Materiel Command Distribution: To be distributed in accordance with the initial distribution number (IDN) , requirements for TM HR.

20

21

22

23

24 PIN:

25 This fine document... Was brought to you by me: Liberated Manuals -- free army and government manuals Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap watermarks and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends? I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on. I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines: <A HREF= Military and Government Manuals</A> Sincerely Igor Chudov Chicago Machinery Movers