SLICER SEEDER Model No. SDS270CSB20000 Serial No and Up Picture below may not reflect actual product.

Transcription

1 SLICER SEEDER Model No. SDS270CSB20000 Serial No and Up Picture below may not reflect actual product. Part No Rev. A

2 Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and the description of each part desired. Understanding Reference Numbers Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration. Service Assembly Reference Numbers Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1,6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists. Reference Numbers Indicating Quantity In an illustration, if a reference number indicates more than one part, the reference number has the form nx y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated. List of Abbreviations AR: as required ASM: assembly BBC: blade brake control BHTF: button head thread forming CARR: carriage CCW: counter clockwise CW: clockwise DEG: degrees DPA: Dual Point Adjustment ECM: electronic control module EXT: external FH: flat head GA: gauge HD: heavy-duty HF: hex flange HH: hex head HHF: hex head flange HHFTF: hex head flange thread forming HJ: hex jam HLH: hex lag head HOC: height-of-cut HP: high pressure HSBH: hex socket button head HSFH: hex socket flat head HSH: hex socket head HWH: hex washer head HWHTF: hex washer head thread forming HYD: hydraulic LH: left hand LP: low pressure LPG: Liquefied Petroleum Gas NI: nylon insert NPTF: national pipe thread fine PFH: phillips flat head PPH: phillips pan head PPHTF: phillips pan head thread forming PRH: phillips round head PTH: phillips truss head PTO: power-take-off RH: right hand ROPS: roll-over protection system RRB: rear roller brush SFH: slotted fillister head SHH: slotted hex head SHWH: slotted hex washer head SPH: slotted pan head SQH: square head SRH: slotted round head STD: standard TAP: self tapping TTH: torx truss head Touch Up Paint Exmark black touch up spray paint gloss black. Exmark red touch up paint (spray paint P/N oz liquid bottle P/N ) Exmark Mfg. Co., Inc. Industrial Park Box 808 Beatrice, NE Contact us at Printed in the USA. All Rights Reserved

3 If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE Guaranteed!! (Some restrictions apply. See your participating Exmark Dealer for details.) Contents Main Frame Assembly Main Frame Assembly No Handle Assembly Cutting Wheel Assembly Shaft Assembly No Seed Gate Assembly Seed Gate Kit No Belt Drive Assembly Transmission Assembly

4 1 1 Engine-Subaru, Ex Frame ASM Guard-RH Bolt-Carriage 1/4-20 X 5/ Nut-Nyloc 1/4-20 Flg Screw-HH 3/8-16 X 1 3/ Nut-Nyloc 3/8-16 Flg Nut-Nyloc # Screw-SHH #8-32 X 5/ Guard-Dust Plate-Retainer Plate-Retainer Decal-Slicer Seeder 20 Main Frame Assembly Decal, Exmark Logo Decal-Exmark X-Logo Plate-Engine Screw HHF 3/8-16 X Nut-Nyloc 3/8-16 Thin Seeder Cover Kit 45: Latch-Rubber 45: Washer-#10 Std 45: Screw-PPH #10-24 X 5/8 45: Latch-Keeper Guard,Muffler Screw-HWH Not serviced separately A 4 A2

5 Main Frame Assembly No Decal-Danger Decal-Warning, Shields Decal-Warning Decal Decal-Flow, Seed Decal-Bypass Decal-Arrester, Spark Decal-Service Aid Seeder A2A A

6 Knob-Rate, Flow Lever-Adjust, Flow Bracket-Adjust, Flow Handle-Lower Bracket-Adjust, Drive Handle 6: Decal-Control Panel, Seeder 6: Decal-Safety Latch Bail-Clutch Handle-Drive Bolt-Carriage 1/4-20 X 1/ Washer-1/4 Sae Bolt-Carriage 3/8-16 X Nut-Nyloc 3/8-16 Flg Ring-Handle Lock Bearing Nut-Nyloc 1/4-20 Flg Screw-Shoulder Screw-HH 1/4-20 X Bolt-Carriage 1/4-20 X 3/4 Handle Assembly Washer Screw-HH 5/16-18 X Plug Cable-Flow, Seed Cable-Push Pull Spacer-Hub, Impeller Spacer Screw-HH 1/4-20 X 5/ Clamp-Hose Nut-Nyloc 1/ Decal, Exmark Logo Tie-Cable Latch-Bail Bolt-Carriage 1/4-20 X Bolt-Carriage 5/16-18 X Bushing-Stepped Nut-Nyloc 5/16-18 Flg Washer-Flat Switch Spring Use Pro-Lock, Nut Type (P/N ,.5ml tube) on threads A 6 B2

7 Handle-Height Spacer Plate-Height Pivot-Height Decal-Cut Depth, Slicer/Seeder Bearing Bolt-Carriage 5/16-18 X 7/ Nut-Nyloc 5/16-18 Thin Screw-HH 5/16-18 X 5/ Nut-Blade Nut-Nyloc 1/4-20 Flg Bearing-Flange Cutting Wheel Assembly Screw-HH 1/4-20 X 1 1/ Key-Woodruff #9 3/4 X 3/ Lever ASM 25: Screw-Lock 25: Cap-Lock 25: Lever-Lock 25: Nut-Nyloc 5/ Washer Nut-Nyloc 1/ Slicer Shaft ASM Zerk-1/4-28 Str Screw-Set HSH 1/4-28 X 1/4 Use Pro-Lock, Nut Type (P/N ,.5ml tube) on threads. C A

8 Shaft Assembly No Shaft-Slicer Blade-Cutting, Seeder Spacer-Blade Spacer Nut-Lock, NI A 8 C2A2

9 Seed Gate Kit Bracket-Seed Flow Gauge-Seed Flow Mixer Axle-Front Bolt-Carriage 5/16-18 X 3/4 Short Neck Spacer Wheel ASM 13: Tire 13: Wheel-Rim 13: Valve E-Ring Washer-Flat Seed Gate Assembly Screw-HH 1/4-20 X 5/ Bolt-Carriage 1/4-20 X 5/ Nut-Nyloc 5/16-18 Flg Key-Machine 3/16 X 3/16 X 1 1/ Bearing Spacer-Hub, Impeller Bolt-Carriage 1/4-20 X 1 1/ Knob Washer Nut-Nyloc 1/4-20 Flg Bolt-Carriage 1/4-20 X 3/4 Short Neck Nut-Lock, NI Use Pro-Lock, Nut Type (P/N ,.5ml tube) on threads. Apply anti-seize compound to axle ends before installing tires. D A

10 Seed Gate Kit No Gate-Seed Spacer Bolt-Carriage 1/4-20 X 3/4 Short Neck Nut-Lock, NI Bolt-Carriage 1/4-20 X Spring-Extension A 10 D2A3

11 Bumper Washer-Spacer Washer-Spring Disc 7/ Key-Machine 1/4 X 1/4 X Rectifier-Bridge Key-Machine 3/16 X 3/16 X 1 1/ Spacer Nut-Lock 1/ Pulley-Tension Spacer-Kickstand, Long Pulley-Idler Screw-HH 3/8-16 X Nut-Nyloc 3/8-16 Flg Relay Nut-Nyloc 1/4-20 Flg Screw-HWH Bolt-Carriage 1/4-20 X 3/ Pulley-Mule Drive Belt Drive Assembly Use Pro-Lock, Nut Type (P/N ,.5ml tube) on threads. Use dielectric grease on all unsealed connectors and terminals only. Do not apply in sealed connectors Belt-Seeder, Clutch Idler Arm ASM 21: Bushing Belt-Mule Drive Bracket-Spring Support-Engine Sheave-Taper Lock Bushing-Taper Lock Pivot-Idler Washer-Lock 1/ Screw-HH 1/4-20 X Stop-Clutch Pulley-Idler V Pulley-Idler Flat (4.06-Inch) Clutch-Electric Screw-HH 5/16-18 X Belt Guard ASM 35: Decal-Danger 35: Decal-Seed Graph E A

12 Belt Drive Assembly (continued) Harness-Slicer/Seeder Decal-Bridge Rectifier Screw-HH 1/4-20 X 5/ Spring-Extension Spacer Screw-HH 7/16-20 X Bolt-Carriage 3/8-16 X 1 3/ Screw-HH Flg 5/16-18 X 3/ Screw-HH 5/16-24 X 3/ Screw-HWH Washer-Spring Disc Nut-Flange #10-24 Top Lock Nut-Insert Ring-Retaining Washer Screw-Set, Hs Use Pro-Lock, Nut Type (P/N ,.5ml tube) on threads. Use dielectric grease on all unsealed connectors and terminals only. Do not apply in sealed connectors A 12 E2

13 Bracket-Cable Bracket-Axle Bracket-Transaxle, Torque Transaxle ASM Bracket-Transaxle Ring-Retaining Pin-Cotter Spacer Wheel ASM 10: Tire 10: Wheel-Rim 10: Valve Bolt-Carriage 5/16-18 X 3/4 Short Neck Nut-Nyloc 5/16-18 Flg Transmission Assembly Bolt-Carriage 1/4-20 X 5/ Nut-Nyloc 1/4-20 Flg Screw-HH 5/16-18 X 2 3/ Screw-HH 5/16-18 X Key-Machine 3/16 X 3/16 X 1 1/ Washer Pin-Clevis 1/4 X 3/ Clevis Spacer Spring-Compression Rod-Brake Nut-Hex 1/ Lever-Bypass Apply anti-seize compound to axle ends before installing tires. F A

14 Notes:

15 EXMARK MAINTENANCE MAXIMIZE THE PERFORMANCE OF YOUR EXMARK. 4-CYCLE PREMIUM ENGINE OIL Part No Both SAE 30 and SAE 10W-30 in one bottle. Contains increased levels of zinc and phosphorus for better lubricity. No Viscosity Index Improvers that tend to shear down in high heat. Synthetic formulation. Gas & Diesel compatible. Anti-corrosion additives. API 'SL' and JASO rated with wet clutch compatibility for other machines. PREMIUM HYDRO OIL Part No Commercial quality for tough, highheat conditions. Designed specifically for zero-turn mower hydraulic systems. Superior shear resistance under heavy loads. Available from your local Exmark dealer. Find your closest dealer at exmark.com

16 EXMARK ACCESSORIES AND OPTIONS* MID-MOUNT RIDING ACCESSORIES AND OPTIONS CUSTOM RIDE SEAT SUSPENSION SYSTEM FULL SUSPENSION SEAT DECK LIFT ASSIST KIT HITCH KIT LIGHT KIT 12V POWER PORT MICRO-MULCH SYSTEM OPERATOR CONTROLLED DISCHARGE SUN SHADE TRASH CONTAINER TURF STRIPER ULTRA VAC COLLECTION SYSTEM ULTRA VAC QUICK DISPOSAL SYSTEM OUT-FRONT RIDING ACCESSORIES AND OPTIONS CUSTOM RIDE SEAT SUSPENSION SYSTEM DUAL-TAIL WHEEL FLOOR PAN EXTENDER HITCH KIT LIGHT KIT MICRO-MULCH SYSTEM ROLL OVER PROTECTION SYSTEM (ROPS) SNOW BLADE SNOWBLOWER SUN SHADE TRASH CONTAINER ULTRA VAC COLLECTION SYSTEM ULTRA VAC QUICK DISPOSAL SYSTEM WEATHER CAB WALK-BEHIND ACCESSORIES AND OPTIONS GRASS CATCHER MICRO-MULCH SYSTEM TURF STRIPER STANDON *Some accessories and options not available for some models. Place Model No. and Serial No. Label Here (Included in the Literature Pack) or Fill in Below Model No. Date Purchased Engine Model No. and Spec. No. Engine Serial No. (E/No) Serial No Exmark Mfg. Co., Inc. Industrial Park Box 808 Beatrice, NE All Rights Reserved Part No Rev. A (402) Fax (402) Printed in the USA. * * A