...JUST GIVE US A CALL!

Transcription

1 Alloy Motor Accessories have been manufacturing bull bars, ute tray toolboxes, aluminium roof racks, ute steel trays, roof baskets and other vehicle equipment and accessories for more than 20 years! AMA have an extensive range of products for new and recent vehicle models, and can also custom manufacture items to your specific requirements...just GIVE US A CALL!

2 Alloy Nudge Bar 76mm (3inch) High Tensile Structural Grade Tubular Alloy ADR & Air Bag Compliant 2 x Welded Spotlight/Driving Light Tabs Vehicle Specific Mount Kit Australian Designed and Made Stainless Steel option available for some vehicles Alloy Extreme Winch Bar LED in-bar indicators/parkers Air Flow Vent 12 Month Manufacturer s 5mm Hi-Tensile Structural Warranty Grade Polished Alloy ADR & Air Bag Compliant Spot Light/Arial/CB Tag Vehicle Specific Mount Kit Provision Winch Compatible Bash Plates Fog Light Assembly Alloy Grille Guard 76mm (3inch) High Tensile Structural Grade Tubular Alloy ADR & Air Bag Compliant 2 x Welded Spotlight/Driving Light Tabs Cross Over Bar for Mounting (Lights etc.) Vehicle Specific Mount Kit Stainless Steel Option available for some vehicles Alloy Extreme LED in-bar Indicators/Parkers 12 Month Manufacturer s Warranty ADR & Air Bag Compliant 5mm Hi-Tensile Structural Grade Polished Alloy Spot Light/Arial/CB Tag Provision Vehicle Specific Mount Kit Bash Plates Air Flow Vent Alloy Loop Bar 76mm (3inch) High Tensile Structural Grade Tubular Alloy 2 x Welded Spotlight/Driving Light Tabs 3.25mm Wall Thickness ADR & Air Bag Compliant Vehicle Specific Mount Kit Black Winch Compatible Extreme Bar LED in-bar Indicators/Parkers 12 Month Manufacturer s Warranty ADR & Air Bag Compliant Vehicle Specific Mount Kit Air Flow Vent High Grade Black Steel Spot Light/Arial/CB Tag Provision Winch Compatible Bash Plates *Stainless Steel Option available for SOME vehicles Pg3

3 Alloy Tube Checker Side Steps 3.5mm Wall Thickness, 76mm Tube ADR & Side Air Bag Compliant Bolted to Vehicle Chassis Extrusion Grip Lines for Non Slip Smoothed, Tapered Edges Australian Engineered & Manufactured Alloy Mega Step 76mm (3inch) High Tensile Structural Grade Tubular Alloy 3mm Wall Thickness Typically fitted to the Front of the Tray & Headboard for easier access Bolted to Alloy Tray & Headboard Smooth, Tapered, Welded Edges Flat Running Board Side Steps 3.5mm Wall Thickness ADR & Side Air Bag Compliant Bolted to Vehicle Chassis Non Slip EP Black Plastic Treads Smooth, Welded, Tapered Edges Made of Structural Grade Tubular Alloy Alloy Tubular Side Steps 76mm (3inch) High Tensile Structural Grade Tubular Alloy Non Slip Rubber Treads ADR & Side Air Bag Compliant Bolted to Vehicle Chassis Smooth, Welded Edges Under Tray U Step 50mm (3inch) High Tensile Structural Grade Tubular Alloy 3mm Wall Thickness Typically fitted to the Rear of the Tray for easier access Bolted to Alloy Tray Floor Smooth, Tapered, Welded Edges Australian Engineered & Manufactured Under Tray J Step 76mm (3inch) High Tensile Structural Grade Tubular Alloy 3mm Wall Thickness Typically fitted to the Front of the Tray for easier access Bolted to Alloy Tray Floor Smooth, Tapered, Welded Edges Non Slip Pad 12 Month Manufacturer s Warranty Pg4

4 T1 Ladder Rack 76mm (3inch) High Tensile Structural Grade Tubular Alloy Come with 22mm Removable Bolt in Pins Under Tray Mounts available Rear Ladder Racks are removable Compatible with Style Side or Alloy Trays 150kg Load Rating Australian Engineered and Made Roof Racks Pro Rack Whisper Heavy Duty Roof Racks Tough Aluminium Profile Integrated Tie Down Points 75kg Load Rating Wind Noise Reducers T2 Ladder Rack 76mm (3inch) High Tensile Structural Grade Tubular Alloy Come with Welded End Cap Ears Under Tray Mounts available Rear Ladder Racks are removable Compatible with Style Side or Alloy Trays 150kg Load Rating Australian Engineered and Made Razor / Conversion Bar 76mm (3inch) High Tensile Structural Grade Tubular Alloy Comes with Welded End Cap Ears Compatible with Style Side or Alloy Tray Converts a Sports Bar or Headboard to a Front Ladder Rack to match a Rear T2 Australian Engineered and Made Tee Rack Made of High Tensile Structural Grade Tubular Alloy Come with Welded End Cap Ears Compatible with a Nudge or Bull Bar Fully Removable 1250 W x 1250mm H 50kg Load Rating (Nudge), 100kg for Bull Bar 12 Month Manufacturer s Warranty ADR & Air Bag Compliant Pg5

5 Double A Sports\Roll Bar 76mm High Tensile Structural Grade Tubular Alloy Custom Height per Vehicle Tapered Edges Bolts to the Tub Sides Outer Tube Welded forming an A Return Hard Lids Comes Standard with Spotlight Mounts Available in Checker Plate Aluminium or Polycarb Plastic Suits MOST Space & Dual Cabs Tray Suspension/Equaliser Winch Bolted to Ute Tray Latch and Striker Clip to the Rear Twin Gas Struts Lockable Available in 1 piece or 3 piece Latest & Most advanced add-on suspension kit in the world Swing Shack, Parabolic Design Reduces Ball Roll on corners Assists in Payload carrying Tapered Spring Design Greasable Pins to allow adjustment of tension Rubber Nudge Stop Provides extra lift 3 Year Warranty Available in various sizes Hook and Latch Ends Available in Synthetic or Steel Cable Options Compatible with Winch Compatible Bars Single A Sports\Roll Bar 76mm High Tensile Structural Grade Tubular Alloy Bolts to the Tub Sides Custom Height per Vehicle Tapered Edges Welded Tubes 3.5mm Wall Thickness Can add Spotlight Mounts Window Mesh Protection Tubular Alloy Frame Aluminium Security Mesh Panel Protects Cabin Widow Bolted to Centre Uprights of Tray Headboard Square Window Mesh Protection High Tensile Structural Grade Tubular Alloy Aluminium Square Laser Cut 5mm Panel Protects Cabin Widow Bolted to Centre Uprights of Tray Headboard Tail Light Protectors High Tensile Structural Grade Tubular Alloy Frame surrounding Tail Lights to protect against minor bumps Square Design Pg6

6 Drop in Tub Liner Supplied standard with a matching tailgate Tested in harsh conditions to ensure maximum reliability and durability Made from high density polyethylene Over and Under Rail Option Available Suitable for most Style Side Utilities Spray on Tub Liner Reduced slip resistance Reduced impact resistance Excellent abrasion resistance Good corrosion resistance Rear Protection Bar 76mm High Tensile Structural Grade Tubular Alloy Custom Designed to suit and wrap your vehicle Single Bar Foot Fall Cut Out in the centre with welded checker plate Scrub Bar 50/63mm Alloy Bar Vehicle specific Moulding & Mounting Connects to Bull Bar and runs alongside the vehicle to protect paint and vehicle sides Scrub Rails be into Side Steps or sold alone Vehicle MUST be fitted at AMA Custom made to order, Steel also available Headboard Wheel Mounts Special Bolt System that securely attaches your spare tyre to your Headboard Cheaper alternative to an under tray mount Great alternative if you need storage underneath your tray Under Tray Wheel Mounts Under Tray Spare Wheel Storage Bolted to the Tray Z Rails Soft Tonneau Covers Over Rim Clip Lock or Shock Bungy Cord available Custom Cut Outs with Resealable Flaps available for Sports Bars & Ladder Racks 600GSM Thickness PVC Coated Base Cloth Treated to resist UV and Mould Pg7

7 CB/Antenna Lugs Alloy Lugs that can be welded onto any of our parts for extra Tie Downs, CB Radios, Antenna s, Lights Etc. Heavy Duty with 5mm Thickness 17mm centre hole Lockable Fuel Filler Cap Extra security for your fuel tank and engine HID Driving Lights Hi Intensity Discharge Lights Great for distance lighting Long life expectancy of hours HID Xenon Bulbs which produce a cold white light Fog Lights Fully sealed and waterproof Compliant with Australian Standards Supplied in pairs Halogen Bulbs 12 month Warranty LED Tail Lights Preferred by AMA due to faster illumination and greater longevity Clear, Amber & Red Lights in one mounted unit Fitted standard when Style Side Tubs are removed and replaced with our Trays. Also available for individual purchase Halogen Tail Lights Standard Auto Lights Cheaper alternative to LED s Standard Lights for the VW Amarok Light Force Lights Lightforce Lights are well known as the best in the business! More than 30 years experience, Handmade quality and come with a 12 month warranty. AMA is a proud Distributor for Lightforce products. LED Light Bar Custom mounted alloy Light Bar with Lugs for Spotlighting. Available in various sizes Pg8

8 Under Tray T Rack Holders Alloy under tray mounts for Tee Rack Bars for when not in use and to save tray storage! Conduit Carrier 3meters in length 150mm Diameter End caps Made of PVC Welded D Loop Tie Down Points Checkerplate Capping Internal Tie Downs Alloy D Loop Lugs that can be custom placed onto any of your alloy accessories Heavy Duty 5mm thickness Can be used for extra tie down points, CB Radio antennas, Spotlights etc. 2.5mm Thickness Alloy Checkerplate Board protection for Trays from Scratching and minor Bumps Vehicle Specific mounting Aluminium Extrusion Tie Down Rail Rated up to 200kg Mounted internally on Alloy Trays Zinc Plated Stainless Steel Flush Mount, Floor recessed Tie Down Cut into and mounted in Alloy Trays Spring Loaded O Loop Rated up to 500kg Custom Placed at your request Mounted Work Light Lift Gates LED Work Lights Custom Placed Runs off Isolator Switch and uses battery power LYCO LOADER Award winning, manually operated lifting device. Load Rating of 300kg! Weighs 50kg Integral brake system TOMMY LIFT GATE Dual Cylinder Fully enclosed Hydraulic Cylinder System that provides power to both arms Parallel arm design Load Rated up to 700kg Recessed control Military aircraft lifting cables Replaces tray tailgate Timed delay shut off Pg9

9 Heavy Duty Tow Bar Over Cab Powder coated Black Steel Heavy Duty up to 4Tonne Towing Capacity Comes with Ball, Tongue & Flat or Round 7Pin Options Vehicle Specific Mounting Mounted to vehicle chassis 76mm (3inch) High Tensile Structural Grade Tubular Alloy Attaches to Ladder Racks to provide extra protection for your Utility Cab 12V Power Outlet Anderson Plug Extra Power Outlet Socket 12Volts Powered from auto battery 12Volt Amp Electrical connection for campers, power tools, appliances, etc. Rubber Tray Floor Mesh Beacon Light Ute Tray Liner Custom cut to suit Heavy Duty Black Rubber Mesh Style with breathing holes 5mm Thickness Rubber studs on the bottom to restrict movement LED Light Inside Amber Casing Great for worksites and Mine Spec Vehicles Wired in accordance to customer requirements, Isolation switch available Ribbed Rubber Tray Mat Dual Battery System Ute Tray Liner Custom cut to suit Heavy Duty Black Rubber 1 piece Mat 6mm Thickness Rubber studs on the bottom to restrict movement Fitted with Isolation switch to protect from power drain An effective and simple system to power accessories without draining the starting battery Pg10

10 Trundle Draws AMA pride ourselves in being a supplier of fully constructed aluminium trundle draws. Compared to other trundle draws which are galvanised steel which are prone to rust and are very heavy, AMA Trundles are made of Heavy Duty Flat Plate Alloy which are Rust Proof and come with a 12month Warranty. SPECS: 3mm Aluminium Sheet Construction Stainless Steel T Locks Heavy Duty Roller slide system Weather Resistant Rubber Seals 304 Grade Stainless Steel Nut & Bolt Hardware Load Rating approximately 50kg Fitted underneath the Tray, between the Z Rails and Chassis SIZES AVAILABLE: 2100: 2130x 780 x 170mm (Ext) 1800: 1830 x 780x 170mm (Ext) 1500: 1530 x 780 x 170mm (Ext) 1200: 1230 x 780x 170mm (Ext) Toolboxes AMA Toolboxes are excellent quality and are trade tough! They come with a 12 Month Warranty and we can fit it to your vehicle for you! Made of Heavy Duty 2.5mm thick Checkerplate with Weather Resistant Rubber Seals Strong Key Lockable T-Locks Pair Keyed alike Full Length Piano Type Hinge/Welded Aluminium Hinges Heavy Duty Slides Fully Seam Welded Are 100% Rust Proof. Our Toolboxes We also CUSTOM Toolboxes to meet your requirements. 3/4 Door Angled Toolboxes Box Internal + Full Draw AMA4: 1000 x 500 x 800mm AMA5: 1210 x 500 x 700mm AMA16: 1500 x 550 x 800mm AMA17: 1750 x 600 x 800mm AMA27: AMA14:1800 x 500 x 700mm 2000mm x 600mm x 850mm Pg11

11 Cross Deck Box / Mini Canopy Toolbox AMA14:1780 x 700 x 850mm Multi Purpose Chest AMA8: 1230 x 380 x 380mm Alloy Dog Box Frame with Security Mesh 1780 x 700 x 850mm Small Generator Box AMA3 60 x 540 x 330mm AMA3B 700 x 650 x 450mm Drawer Box Under Tray Toolboxes AMA19: 860/500 x 460 x 460mm AMA19B: 1200/860 x 400 x UTSM /540 x 420 x 200mm UTSM /540 x 420 x 250mm AMA2DS/PS 600/400 x 420 x 250mm Gullwing Box Universal Box with Draws AMA x 500 x 500mm AMA x 650 x 500mm AMA15 (2 x drawers) 1450 x 600 x 850mm AMA15B (3 x drawers) 1750 x 600x 850mm Pg12

12 Chest Style Toolbox AMA23: 1200 x 600 x 500mm AMA7: 1490 x 600 x 500mm AMA7B: 1750 x 600 x 500mm Water Tanks Under Tray Mounted Water Tank with Hand Wash Dispenser and OHS NOT FOR DRINKGING Stickers for safety. Made of High-density Polyethylene, which is tough, UV Stable and durable has a large strength-to-density ratio Comes with 'DO NOT DRINK' Stickers for Health and Safety Attached bottle for Soaps/Detergents/Hand wash Top Side Resealable Filler cap Bottom Tap/Valve which is fully closable for water dispensing Mounted underneath the tray Universal Box with Internal Draws AMA15: (2 x drawers) 1450 x 600 x 850mm AMA15B: (3 x drawers) 1750 x 600x 850mm 15Litre 30 Litre Box Internal + 3/4 Draw AMA4: 1000x 500 x 800mm AMA5: 1210x 500 x 700mm AMA16: 1500 x 550x 800mm AMA17: 1750 x 600 x 800mm AMA27: 2000 x 600 x 850mm Pg13

13 AMA Canopies are manufactured and engineered onsite out of the best quality materials, hardware and design practices, and are custom made to your Specifications. We offer a stylish, strong, highly functional canopy that enhances the appearance and practicality of your vehicle. ALLOY CANOPY SPECS Heavy Duty 2.5-3mm Locally Sourced Aluminium Checkerplate OR Flat Plate finish Fully Seam Welded Rubber Weather Seals Welded Aluminium Hinges 2 OR 3 fully opening Door Access with Gas Struts Exterior Compression Locks fitted Heavy Duty Roof Structure Stainless Steel Hardware In-built 2.5mm Aluminium Floor Securely Mounted to Tray OPTIONAL EXTRA'S AVAILABLE: Canopies are Fixed or Jack Off 2 way Privacy Locks Windows - Screen Sliding or Glass Hinged Window with insect mesh & Blind Dog Cages Courier Cages Internal Shelving / Draws (CUSTOM) Door frame mounted LED lights + trigger switch Front & Rear Type-2 Canopy Roof-mounted racks in 50mm box-section Sliding Window with integrated insect mesh Powder Coating Fridge Slide out unit with drop position Pg14

14 AMA Canopies are manufactured and engineered onsite out of the best quality materials, hardware and design practices, and are custom made to your Specifications. We offer a stylish, strong, highly functional canopy that enhances the appearance and practicality of your vehicle. CANVAS CANOPY SPECS Tube Section 4 OR 6 Leg REMOVABLE Canopy Frame 3mm Alloy Plate Hard Deck 1450mm with Longitudinal Rails GSM Heavy Duty Super Proof 12 Canvas Heavy Duty Zip Sides Waterproof Australian Made Comes in 12 Colours Tear Resistant Stainless Steel Hardware Flame Retardant Securely Mounted to Tray UV Stabilised 5 Year Guarantee OPTIONAL EXTRA'S AVAILABLE: 3MM Alloy Checkerplate Headboard Panel with Perspex Window to suit Frame Framed Security Mesh Door Insect Mesh Panel Vinyl Window Custom Placed Over cab Projection of Hard deck Pg15

15 AMA Alloy Trays are the best in the business, not only for sturdiness, lifespan and durability but also for the great look! AMA have engineered a NEW Budget Tray Type that is capable to take your vehicle to its maximum allowable payload and is Trade Tough! Available in Single, Space OR Dual Cab, with extension options also available! Square Commercial Grade Headboard 225mm Heavy Duty Dropsides Heavy Duty 304 Grade Stainless Steel Hardware 2.5mm Alloy Checkerplate Mudguard s and Flaps with External Stays AMA Exclusive Adjustable Over latch System Heavy Duty Flooring, rated at 2.2T Heavy Duty Full Length Tie Down Rail, 25mm x 3.5mm thickness 6mm Aluminium Tray ZED Bearers Steel Square Rear Ladder Rack also available Australian Engineered and Manufactured Pg16

16 AMA Prides itself on the fact that we can Custom Make just about anything to suit your specifications! We have engineers and estimators onsite to assist. Drop in and see us or call us to discuss your needs! Pg18