HIGH PERFORMANCE ICE AND SNOW MANAGEMENT EQUIPMENT

Transcription

1 For professionals HIGH PERFORMANCE ICE AND SNOW MANAGEMENT EQUIPMENT Tractor snow plows Truck and utility vehicle snow plows Gritters and sweepers

2 30 years of experience Access to top quality technical equipment, conforming to high requirements is considered to be a challenge at the designing stage. To meet these needs, we offer top quality technological solutions, based on 30-year experience in designing agricultural equipment. We will help to achieve your success! Many have already trusted us. We are passionate about designing machines to meet any farmers needs!

3 TABLE OF CONTENTS Page General characteristics of snow plows 4-9 One-shield snow plow: Smart / Smart K / Lite 10 V-type snow plow: CITY 11 One-shield snow plow: UNI 12 One-shield snow plow: RAM 13 V-type snow plow: PSV 14 V-type snow plow: PSV Up 15 V-type snow plow: AlpS 16 V-type snow plow: AlpS Up 17 V-type snow plow: JUMP 18 Three-shield snow plow: POWER 20 One-shield snow plow: PSC Safe 21 Snow plow made of polyethylene with own lifting system: POLI / POLIS 22 One-shield snow plow: PSS Safe 23 Snow blower: TORNADO 24 Tractor gritters: SAHARA / SAND / GOBI 25 Professional sand spreader: VORTEX 26 Sweepers, LIFT: MOP / Lift 27 Frames 30 V-type snow plow: OLIMP 19

4 GENERAL CHARACTERISTICS OF SNOW PLOWS SaMASZ SNOW PLOWS From ultra light to heavy class. They are designed for winter maintenance of city streets, roads and squares, sidewalks and avenues. The plows can be mounted on the most popular carriers (tractors, trucks, excavators - loaders, backhoe loaders and others) owing to variety of adapters and frames to attach them. These are only a few advantages of SaMASZ snow plows, which owing to their parameters are an optimum and economic device indispensable in winter maintenance of any surface. SOME FEATURES OF SNOWPLOWS: Inclined bars: CITY PSV AlpS / AlpS Up OLIMP PSS SAFE / POLIS PSC Safe Inclined shield: LITE SMART UNI RAM Inclined shields: Inclined shields: JUMP POWER Patented Frame overload protection (sheared bolts): CITY UNI PSV RAM AlpS OLIMP JUMP Hydraulic overload protection: PSV (option) AlpS (option) OLIMP 4

5 GENERAL CHARACTERISTICS OF SNOW PLOWS Clearing bars: Rubber: SMART / UNI/ CITY: 30 mm RAM / PSV / AlpS / JUMP / OLI MP / Power / PSC SAFE / POLI / POLIS / PSS SAFE: 50 mm / 2 Polyurethan-Vulkollan: SMART / UNI / CITY: 30 mm RAM / PSV / Alps / JUMP / OLIMP / POWER / PSC SAFE / POLI / POLIS / PSS SAFE: / 0.3 Steel: SMART / CITY / UNI: 8 mm / 0.3 RAM / PSV / JUMP: 10 mm / 0.4 AlpS / OLIMP / POWER / PSC SAFE: 12 mm / 0,5 20 mm / 0.8 on demand Rubber - corrundum: SMART / UNI / CITY: from 40 mm / 1.6 to 50 mm / 2 RAM / AlpS / PSV / JUMP / OLIMP / POWER / PSS SAFE / POLI / POLIS / PSS SAFE: od 40 mm / 1.6 to 50 mm / 2 KOMBI (Steel rubber - corrundum): SMART / UNI / CITY: 25mm / 1 RAM / PSV / AlpS / JUMP / OLIMP / POWER / PSC SAFE / PSS SAFE: 36 mm /

6 GENERAL CHARACTERISTICS OF SNOW PLOWS Different mounting frames i.e. for loaders, miniloaders, front loaders, trucks etc. can be adjusted according to customer s needs. Mounting Types: 3-point linkage frame: UNI CITY RAM PSV Alps (option) JUMP (option) OLIMP (option) 3-point linkage hitch cat. II: PSC Safe AlpS (option) JUMP (option) OLIMP (option) POWER 3-point linkage hitch cat. I - narrow 400 mm: SMART K CITY K DIN plate - big 3 : PSV Up F1 (A + B) AlpS Up F1 (A + B) OLIMP Up F1 (A + B) PSS F1 (A) Poli / PoliS F1 (A) The pictures show only limited mounting examples. More mounting frames are shown on page

7 GENERAL CHARACTERISTICS OF SNOW PLOWS Stability, comfort and safety of operation: Support wheels SMART (200 x 50): Support wheels (250 x 80): Sliding skids Küper K SMART CITY UNI RAM PSV Alps JUMP OLIMP POWER PSC SAFE POLI / POLIS PSS SAFE RAM PSV Alps JUMP OLIMP POWER PSC SAFE POLI / POLIS PSS SAFE Sliding skids SMART 5 mm/ 0.2 POWER 12 mm /0.5 CITY 5 mm/ 0.2 PSC SAFE 12 mm /0.5 PSV/AlpS 12 mm /0.5 Poli / PoliS 12 mm /0.5 RAM/JUMP PSS SAFE 12 mm / mm /0.5 OLIMP 12 mm /0.5 Road lights PSV Up PSS Up AlpS UP LED clearance lights 12 V lub 24 V Snowdust protection Safety flags + locks RAM (option) PSV (option) Alps (option) JUMP OLIMP POWER PSS SAFE POLI / POLIS 7

8 STEERING Standard CITY, PSV, AlpS, OLIMP LED lights on/off Left shield adjustment Right shield adjustment Multifunctional steering panel (MULTI) Option - CITY, PSV, AlpS, OLIMP Left shield adjustment Front/rear V-adjustment LED lights on/off Unsynchronized adjustment left/right adjustment Right shield adjustment Steering panel PLUS Option - CITY, PSV, AlpS, OLIMP Left shield adjustment Power / LED lights synchronized left / right adjustment Right shield adjustment 8

9 STEERING Standard UP, PSV UP, AlpS UP, OLIMP UP, PSS SAFE, POLI / POLI S Road lights Parking lights Dipped lights Shield right / left only CITY, PSV, AlpS, OLIMP Standard UP H PSV UP H, AlpS UP H, OLIMP UP H Lifting to transport position (Lightening depends on the value shown on the manometer) ON/ OFF Left shield adjustment Road lights Dipped lights Parking lights Lowering to working position Right shield adjustment Standard UP H, PSS H, PSS SAFE H, POLI H, POLIS H Right shield adjustment Lifting to transport position (Lightening depends on the value shown on the manometer) ON/ OFF Left shield adjustment Road lights Dipped lights Parking lights Lowering to working position 9

10 ONE-SHIELD SNOW PLOW SMART, SMART K and LITE with spring protection Standard Equipment SMART Rolled shield Stepless hydraulic adjustment of the shield Spring protection (4 springs) 3 - point linkage Cat. 1 hitch (SMART K) Clearing bar at choice Electric connection 12 V (lighter socket) LED lights 12V or 24 V Support leg Powder painting Only SMART K: Mounting: narrow 3 - point cat. I 400 mm Standard Equipment LITE Rolled shield Stepless hydraulic adjustment of the shield Spring protection (2 springs / 4 springs - optional) Hitch for municipal triangle (475 mm / 19 distance between lower links) Ground following Sliding skids 2 clearing bars rubber and steel (turnable) LED lights 12 V or 24 V Electric connection 12 V (lighter socket) Support leg Safety bumper Powder painting Type SMART 120 / 120 K SMART 150 / 150 K SMART 180 / 180 K SMART 200 SMART 220 LITE 150 Working width min./max. [cm/ft] 120/102 / 150/127 / 180/152 / 3 11 / / / 4 11 Transport width min./max. [cm/ft] 122/112 / 152/137 / 182/162 / 4 / / / /169 / 6 7 / /180 / 7 3 / /139 / 4 11 / /179 / 222/196 / 157/145 / 6 8 / / / 4 9 Shield s height [cm/ft] 64 / / 1 11 Number of the clearing bars (pcs) 1 Protection Inclined shield Angle of attack Hydraulic turning angle right and left up tp 35 up to 27 Needed hydraulic connectors 2 (1-pair) 2 (1-pair) Dimensions [cm/ft] Length / width / height 68 / 122 / 76 / 2 3 / 4 / / 152 / 76 / 2 3 / 4 11 / / 182 / / 5 11 / / 202 / / 6 8 / / 222 / / 7 3 / / 157 / 61 / 1 11 / 5 2 / 2 Weight [kg/lbs] 120 / / / / / /

11 V-TYPE SNOW PLOW CITY with inclined bars Standard Equipment CITY: 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars Clearing bar at choice Ground following (only with SaMASZ frame) Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type CITY 150 CITY 180 CITY 200 CITY 220 Working width min./max. [cm/ft] 150 / 132 / 4 11 / / 158 / 5 11 / / 175 / 6 7 / / 195 / 7 3 /6 5 Transport width min./max. [cm/ft] 154 / 138 / 5 / / 164 / 6 / / 181 / 6 8 / / 201 / 7 5 / 6 7 Shield s height [cm/ft] 59 / 68 / 1 11 / / 70 / 1 11 / / 72 / 1 11 / / 74 / 1 11 / 2 5 Needed hydraulic connectors 2 (1-pair) Number of the clearing bars (pcs) 4 6 Protection Spring protection + torn off bolts on mounting frame Angle of attack 0 Hydraulic turning angle right and left do 30 Dimensions [cm/ft] Length / width / height 72 / 151 / 80 / 2 4 / 4 11 / / 181 / 82 / 2 6 / 5 11 / / 201 / 84 / 2 6 / 6 7 / / 227 / 85 / 2 6 / 7 5 / 2 9 Weight [kg/lbs] 130 / / / /

12 ONE-SHIELD SNOW PLOW UNI with spring protection Standard Equipment UNI Rolled shield Stepless hydraulic adjustment of the shield Spring protection (6 springs adjustable) Adjustable angle of attack Ground following (only with SaMASZ frame) Clearing bar at choice Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type UNI 180 UNI 200 UNI 220 Working width min./max. [cm/ft] 180 / 155 / 5 11 / / 170 / 6 7 / / 190 / 7 3 / 6 3 Transport width min./max. [cm/ft] 187 / 159 / 6 2 / / 176 / 6 9 / / 183 / 7 5 / 6 Shield s height [cm/ft] 80 / 2 7 Number of the clearing bars (pcs) 1 Protection Inclined shield + Torn off bolts on mounting frame Angle of attack from 0 to 21 Hydraulic turning angle right and left up to 32 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 106 / 187 / 95 / 3 6 / 6 2 / / 207 / 95 / 3 6 / 6 9 / / 227 / 95 / 3 6 / 7 5 /3 1 Weight [kg/lbs] 190 / / /

13 ONE-SHIELD SNOW PLOW RAM with spring protection Standard Equipment RAM Rolled shield Stepless hydraulic adjustment of the shield Ground following (only with SaMASZ frame) Clearing bar at choice Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type RAM 250 RAM 270 RAM 300 Working width min. / max. [cm/ft] 250 / 218 / 8 2 / / 235 / 8 11 / / 260 / 9 11 / 8 6 Transport width min. / max. [cm/ft] 256 / 220 / 8 5 / / 250 / 9 / / 276 / 10 1 / 9 Shield s height [cm/ft] 75/85 / 2 6 /2 9 Number of the clearing bars (pcs) 3 Protection Inclined shield + Torn off bolts on mounting frame Angle of attack 30 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1-pair) Dimensions [cm/ft] Length / width / height 106 / 258 / 107 / 3 6 / 8 6 / / 278 / 107 / 3 6 / 9 1 / / 308 / 107 / 3 6 / 10 1 / 3 6 Weight [kg/lbs] 280 / / /

14 V-TYPE SNOW PLOW PSV with inclined clearing bars Standard Equipment PSV 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars Clearing bar at choice Ground following (only with SaMASZ frame) Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type PSV 161 PSV 181 PSV 201 PSV 231 PSV 251 PSV 271 PSV 301 Working width min./ max. [cm/ft] 163 / 153 / 5 4 / / 160 / 6 / / 180 / 6 8 / / 202 / 7 8 / / 225 / 8 4 / / 235 / 8 11 / / 262 / 9 11 /8 7 Transport width min. / max. [cm/ft] 177 / 157 / 5 11 / / 176 / 6 6 / / 193 / 7 1 / / 222 / 8 1 / / 238 / 8 9 / / 256 / 9 5 / / 282/ 10 5 / 9 3 Shield s height [cm/ft] 80 / 90 / 80 / 91/ 80 / 93/ 80 / 94/ 80 / 95/ 80 / 96/ 80 / 98/ 2 7 / / / / / / / 3 3 Number of the clearing bars (pcs) 2 4 Protection Spring protection + torn off bolts on mounting frame Angle of attack 0 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1-pair) Dimensions [cm/ft] Length / width 97 / 175 / 3 2 / / 195 / 3 3 / / 215 / 3 3 / / 245 / 3 3 /8 103 / 265 / 3 5 / / 285 / 3 5 / / 315 / 3 5 / 10 4 Weight [kg/lbs] 230 / / / / / / /

15 V-TYPE SNOW PLOW PSV UP with inclined clearing bars and own lifting system Standard Equipment PSV Up Own lifting system 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars Ground following Clearing bar at choice Electric connection 12 V (lighter socket) / Electric connection 24 V (version with hydraulic pump) Road lights LED lights 12 V or 24 V Lightening Manometer Support leg Safety bumper Powder painting PSV Up H: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V) Type PSV 231 Up PSV 251 Up PSV 271 Up PSV 301 Up PSV 231 Up H PSV 251 Up H PSV 271 Up H PSV 301 Up H Working width min./max. [cm/ft] 233 / 202 / 7 8 / / 225 / 8 4 / / 235 / 8 11 / / 262 / 9 11 / / 202 / 7 8 / / 225 / 8 4 / / 235 / 8 11 / / 262 / 9 11 /8 7 Transport width min./max. 247 / 222 / [cm/ft] 8 1 / / 94/ Shield s height [cm/ft] 2 7 / 3 1 Mounting type Number of the clearing bars (pcs) Protection 267 / 238 / 8 9 / / 256 / 9 5 / / 282/ 10 5 / / 222 / 8 1 / / 238 / 8 9 / / 256 / 9 5 / / 282/ 10 5 / / 95/ 80 / 96/ 80 / 98/ 80 / 94/ 80 / 95/ 80 / 96/ 80 / 98/ 2 7 / / / / / / / 3 3 Municipal plate EN F1+F2, DIN Size 3 A + B Inclined clearing bars Angle of attack 0 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors Dimensions [cm/ft] Length / width / height 4 (2 - pair) Power 24 V 134 / 245 / / 267 / / 285 / / 315 / / 245 / / 267 / / 285 / / 315 / 151 Weight [kg/lbs] 450 / / / / / / / /

16 V-TYPE SNOW PLOW AlpS with inclined clearing bars Standard Equipment AlpS 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars hydraulic overload protection from 361 type Clearing bar at choice Ground following (only with SaMASZ frame) Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type AlpS 271 AlpS 301 AlpS 331 AlpS 361 AlpS 401 Working width min. / max. [cm/ft] 270 / / / / / 347 Transport width min. / max. [cm/ft] 285 / / / / / 371 Shield s height [cm/ft] 98 / / / / / 115 Number of the clearing bars (pcs) 4 6 Protection Inclined clearing bars + Torn off bolts on mounting frame (only in plows mounted on frames) and hyd. overload protection from type 361 Angle of attack 0 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 135 / 285 / / 315 / / 345 / / 375 / / 415 / 123 Weight [kg/lbs]

17 V-TYPE SNOW PLOW AlpS UP with inclined clearing bars and own lifting system Standard Equipment AlpS Up Own lifting system 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars Hydraulic overload protection Clearing bar at choice Ground following Electric connection 12 V (lighter socket)/electric connection 24 V (version with hydraulic pump) Road lights LED lights 12 V or 24 V Lightening Manometer Support leg Safety bumper Powder painting Only AlpS Up H: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24V) Type AlpS 271 Up AlpS 301 Up AlpS 331 Up AlpS 271 Up H AlpS 301 Up H AlpS 331 Up H Working width min./max. [cm/ft] 250 / / / / / / 347 Transport width min./max. [cm/ft] 285 / / / / / / 308 Shield s height [cm/ft] 104 / / / / / / 112 Mounting type Municipal plate EN F1+F2, DIN Size 3 A + B Number of the clearing bars (pcs) 4 Protection Inclined clearing bars+ Hyd. overload protection Angle of attack 0 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 4 (2 - pair) Power 24 V Dimensions [cm/ft] Length / width / height [cm/ft] 129 / 270 / / 113 / / 116 / / 270 / / 113 / / 116 / 135 Weight [kg/lbs]

18 SNOW PLOW JUMP 280 Standard Equipment JUMP Polyethylene shield joint with 3 - section steel clearing bars Stepless hydraulic adjustment of the shield Exceptional spring protection clearing bar at choice Protection against snow throwing Electric connection 12 V (lighter socket) LED lights 12 V / 24 V support leg safety bumpers powder painting Type JUMP 280 Working width min./max. [cm/ft] 280 / 198 Transport width min./max. [cm/ft] 292 / 210 Shield s height [cm/ft] 122 / 107 Number of the clearing bars (pcs) 3 Protection Inclined clearing bars + torn off bolts on mounting frame and hydraulic overload protection Angle of attack up to 35 Hydraulic turning angle right and left up to 45 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 140 / 290 / 115 Weight [kg/lbs]

19 V - TYPE SNOW PLOW OLIMP with inclined clearing bars and hydraulic overload protection Standard Equipment OLIMP 2 independent shields Stepless hydraulic adjustment of the shield Inclined clearing bars Hydraulic overload protection 3 - point linkage hitch Cat. II Clearing bar at choice Ground following (only with SaMASZ frame) Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Protection against snow throwing Support leg Safety bumper Powder painting Only Up: Own lifting system + steering panel STANDARD UP (24V) Only UpH: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V) Type OLIMP 300 OLIMP 330 OLIMP 300 Up OLIMP 300 Up H Working width min./max. [cm/ft] 263 / / / / 300 Transport width min./max. [cm/ft] 315 / / / / 320 Shield s height [cm/ft] 118 / / / / 132 Number of the clearing bars (pcs) 4 Protection Mounting type - - Inclined clearing bars + Hyd. overload protection + Torn off bolts in mounting frame (only in version with mounting frame Angle of attack 0 Municipal plate EN F1+F2 (DIN Size 3 -A+B) Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 135 / 315 / / 345 / / 315 / / 315 / 140 Weight [kg/lbs]

20 THREE-SHIELD SNOW PLOW POWER with inclined shields Standard Equipment POWER Rolled shield Separate shields Stepless hydraulic adjustment of the shield Inclined shield (3 parts) 3-point linkage hitch Cat. II Clearing bar at choice Protection against snow throwing Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type POWER 330 C Working width min. / max. [cm/ft] 331 / 286 Transport width min. / max. [cm/ft] 335 / 300 Shield s height [cm/ft] 125 Number of the clearing bars (pcs) 3 Protection Inclined shield (3 parts) Angle of attack 22 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 194 / 335 / 150 Weight [kg/lbs]

21 ONE-SHIELD SNOW PLOW PSC SAFE with inclined clearing bar Standard Equipment PSC Safe Rolled shield Stepless hydraulic adjustment of the shield Inclined clearing bar 3 - point linkage hitch Cat. II Clearing bar at choice Protection against snow throwing Electric connection 12 V (lighter socket) LED lights 12 V or 24 V Support leg Safety bumper Powder painting Type PSC 302 Safe PSC 332 Safe Working width min./max. [cm/ft] 300 / / 290 Transport width min./max. [cm/ft] 314 / / 330 Shield s height [cm/ft] 98 Number of the clearing bars (pcs) 3 5 Protection Inclined clearing bars Angle of attack 10 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors 2 (1 - pair) Dimensions [cm/ft] Length / width / height 315 / 152 / / 152 / 98 Weight [kg/lbs]

22 SNOW PLOW POLI / POLIS made of polyethylene with own lifting system Standard Equipment POLI / POLIS 8 mm HDPE polyethylene Stepless hydraulic adjustment of the shield Hitch Municipal plate EN F1 + F2, DIN Clearing bar at choice Electric connection 24 V Version with hydraulic pump additionally equipped with steering panel Road lights LED lights 24 V Support leg Safety bumper Tylko PoliS: Inclined clearing bars tension force adjustment Only POLI H / POLIS H: Steering panel and hydraulic system with oil pump Type Poli 270 / H Poli 300 / H Poli 330 / H PoliS 300 / H Working width min./max. [cm/ft] 270 / / / / 275 Transport width min./max. [cm/ft] 283 / / / / 300 Shield s height [cm/ft] 109 Mounting type Plate EN F1 + F2, DIN Size 3 A + B Protection Deflected shield Angle of attack 10 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors version wothout H 4 (2 - pair) (POLI H) Electric power supply version with H Power 24 V Deflected shield and inclined clearing bars Number of the clearing bars (pcs) 3 4 Dimensions [cm/ft] Length / width / height [cm/ft] 177 / 283 / / 314 / / 343 / / 314 / 109 Weight [kg/lbs] / / /

23 ONE-SHILED SNOW PLOW PSS SAFE for trucks with inclined clearing bar Standard Equipment PSS Safe Own lifting system Rolled shield Stepless hydraulic adjustment of the shield Inclined clearing bar (only PSS Safe) Plate EN F1 + F2, DIN Clearing bar at choice Electric connection 24 V Road lights LED lights 12 V or 24 V Protection against snow throwing Support leg Safety bumper Powder painting Tylko PSS Safe H: Own hydraulic unit + oil pump + steering panel STANDARD UP H (24 V) Type PSS 302 Safe / H Working width min. / max. [cm/ft] 300 / 265 Transport width min. / max. [cm/ft] 314 / 300 Shield s height [cm/ft] 98 Mounting type Płyta EN F1 (DIN A) Number of the clearing bars (pcs) 4 Protection Inclined clearing bars Angle of attack 10 Hydraulic turning angle right and left up to 30 Needed hydraulic connectors version without H Electric power supply version with H Dimensions [cm/ft] Length / width / height 4 (2 - pair) (PSS without H), Power 24 V Power 24 V -connection to accumulator 178 / 315 / 98 Weight [kg/lbs] 790 /

24 SNOW BLOWER TORNADO Standard Equipment TORNADO Hydraulic adjustment of blowing tube and blowing distance Steered clearing bar with perforated part 3 - point linkage hitch Cat. II Built - in overload clutch Adjusted to left and right rotation of PTO PTO shaft Type Tornado 200 Tornado 251 Working width [cm/ft] Transport width min. / max. [cm/ft] Working height Number of rotors 1 Needed hydraulic connectors 4 (2-pair) Tractor s power [HP] up to 80 up to 90 RPM 540 / 1000 Working speed up to 3 km / h Snow blowing direction (hydraulically regulated) 360 Distance of throwing (m) up to 10 up to 10 Dimensions [cm/ft] Length / width / height 142 / 205 / / 255 / 210 Weight [kg/lbs]

25 SAND SPREADERS SAHARA SAND GOBI SAHARA SAND GOBI 100 GOBI 140 Type Sahara 140 Sahara 200 Sahara 240 Sand 400 Sand 600 Gobi 100 Gobi 140 Gobi 140 H Working width [cm/ft] up to 300 up to Transport width [cm/ft] Needed hydraulic connectors 4 (2 x 2 pary) Mounting type 3-point plinkage cat. II Drawbar lower links of 3 - point linkage cat. II Tractor s power [HP] from 50 from 40 from 15 from 50 Working speed [km / h] Max. transport speed [km / h] 25 Oil demand [l / min.] Oil pressure [bar] Capacity [m3] 0,50 1,40 1,60 0,32 0,40 0,40 1,5 1,5 Dimensions [cm/ft] Length / width / height 90 / 164 / / 224 / / 264 / / 146 / / 146 / / 180 / / 156 / / 156 / 153 Weight [kg/lbs] Weight with sand [kg/lbs] up to 1075 up to 2900 up to 3500 up to 500 up to 730 up to 850 up to 3000 up to

26 PROFESSIONAL SAND SPREADER VORTEX Standard Equipment VORTEX PTO shaft Safety bar Safety cover (curtain) Spreading regulation Inspection window Powder painting Steering panel in standard equipment Type VORTEX 600 VORTEX 600 E Working width [m] 1,5-8 Transport width min. / max. [cm/ft] 100 / 126 / 130 Attachment 3 - point linkage cat. II Tractor s power [HP] up to 60 max. working speed [km / h] up to 12 km / h max. transport speed [km / h] up to 25 km / h Capacity [dm 3 ] * (option) Dimensions [cm/ft] Length / width / height 100 / 126 / 130 Weight [kg/lbs] 200 EUR NET PRICE $ (mechanical steering) $ (electric steering) Agitator for gravel / salt 1065 / $ 225 Agitator for stones 1065 / $ 145 Agitator for sand 1065 / $

27 SWEEPERS MOP UNIVERSAL LIFT Tractor sweeper - Type MOP 120 MOP 140 MOP 160 MOP 200 Working width [cm/ft] Brush rpm Brush diameter [cm/ft] 60 Working speed [km/h] bis 10 Litter container s capacity [dm3] Dimensions [cm/ft] Length / width / height 140 / 140 / / 140 / / 140 / / 140 / 114 MOP Weight [kg/lbs] Type LIFT 70 Lift Working stroke [cm/ft] 70 Permissible lift capacity [kg/lbs] 1500 Nominal pressure of hydraulic unit [Mpa] 16 Working speed [km/h] up to 10 Height [cm/ft] max. 186 min. 135 Dimensions [cm/ft] Length / width 90 / 45 Weight [kg/lbs]

28 LIST OF FRAMES FOR PLOWS Smart: Standard Version K Standard Version K Municipal triangle adapter (475 mm) Triangle Cat. 0 linkage (660 mm) Adapter Multicar Cat. municipal DIN Cat. 0 Cat. 0 DIN Cat. I Cat. I DIN Cat. II CITY / UNI: City / Uni Frame 280 $ Frame CITY cat. I mm Frame CITY SMS mm Frame City for individual mounting mm mm 0-25 mm mm 0-25 mm mm Hitch City for triangle Cat. municipal (475 mm) Hitch City for triangle Cat. 0 (660 mm) Frame CITY EURO mm mm 0-25 mm 0-25 mm mm Plate City for individual mounting Hitch City for triangle cat. I (860 mm) Frame CITY Big Avant mm mm 0-25 mm Mounting type City cat. I Frame CITY cat. II Frame CITY - MULTICAR mm mm 0-25 mm Frame CITY Kubota R 420 Frame CAT 297 C Frame CITY Hydramet TUR 3A T Attention! The bumpers should be mounted by the customer individually

29 mm mm 0-25 mm mm 0-25 mm Frame CITY KRAMER Mini Frame CITY Wacker / Weidemann Frame JD 4720 TUR 400CX mm 0-80 mm 0-25 mm mm Frame Giant Frame AHLMANN AZ 95 Frame Kramer Allrad mm mm 0-25 mm Frame City JCB 403_406_409 Frame City Gehl 540 Frame TUZ kat. I - II mm 0-25 mm 0-25 mm mm Frame Schaffer 2028 Frame Liebherr L506 - L510 Frame Bobcat AL mm 0-25 mm mm 0-25 mm mm Frame Km130 Knikmops Frame KM90 Knikmops Frame Schaffer mm mm Frame Multihog MX Attention! The bumpers should be mounted by the customer individually 29

30 PSV / RAM: Frame PSV cat. II Frame PSV EURO Frame PSV SMS / 1.2 Plate PSV for individual mounting Frame PSV cat. I Frame PSV Cat. I / II with loose holders Frame PSV cat. I and III Frame PSV Frame cat. municipal Frame JCB 4CX, 3CX, Quick coupling Frame PSV triangular cat. municipal - quick coupling Frame PSV triangular cat. I - quick coupling Frame MULTICAR (PSV PSV 231) Frame PSV for triangle cat. 0 Frame PSV Merlo ZM - 2 Frame JCB Psv / RAM Frame Type II 580 $ For self - mounting on the frame / Frame PSV CAT 444E Frame PSV CAT 428 C (D) (E) / 1.2 / 1.2 Frame PSV JCB 4CX / 3CX Waryński Hidromex 102B Frame PSV KRAMER Allrad 30 Attention! The bumpers should be mounted by the customer individually

31 / 1.2 Frame PSV Liebherr L Frame PSV Liebherr L528/L514 Frame PSV Manitou Frame PSV Volvo L20 - L25 Frame PSV Volvo L30 - L35 Frame PSV Volvo ST - MB Frame PSV JCB 2CX Frame PSV Atlas E - Serie Frame PSV JCB Q - Fit Frame PSV TUR Agram 46 Joskin Frame PSV Schaffer 2028 Frame PSV T SIPMA Frame PSV CAT Frame PSV MERLO backhoe loaders EVS ZM2 Frame PSV CLAAS Scorpion Frame PSV Weideman CX 80 Frame PSV CASE 221 Frame PSV JCB 403 / 406 / Frame PSV New Holland W50 BTC Frame PSV CAT 297C Frame PSV CAT 422E 424D Frame PSV Terex - TL 80 Frame PSV New Holland W170B Frame PSV Bobcat - AL275 Attention! The bumpers should be mounted by the customer individually 31

32 Psv / RAM Frame Type II 580 $ Frame PSV cat. II Frame PSV cat. II Frame KRAMER Frame PSV EURO Frame PSV Komatsu WB 93S Frame PSV CAT 906 H, 907 H, 908 H Frame PSV Terex - TL 65 Frame O&K 10.5 Frame New Holland B110 B TC Frame LIEBHERR L509 Frame EO2626 Pinsk Frame Schaffer Frame Giant Frame Schaffer Frame New Holland LB95 - B Frame CAT 432 F Quick change Frame AHLMANN AZ 95 Frame Bobcat T Frame TUR FAUCHEUX F200 Frame VOLVO L40B Frame NEWHOLLAND LB115B 32 Attention! The bumpers should be mounted by the customer individually

33 Frame JCB Frame JD TUR Frame CAT 428F Frame Komatsu Frame Merlo ZM3 Frame Kramer Mini Frame Kramer Allrad 312 SL Frame New Holland 1345 Frame Cat. I narrow Frame 3-point linkage cat. II and III Frame DIN EN F1 F2 Frame Dieci mini agri 25, Frame Dieci ET Crono 40.7 AlpS / Olimp: Frame AlpS 3 - point linkage Cat. II Frame AlpS with lose holders Plate AlpS for individual mounting Frame AlpS cat. II and III Frame AlpS EURO Frame AlpS SMS Attention! The bumpers should be mounted by the customer individually 33

34 mm Frame AlpS HSW 534 E Frame AlpS CAT 428E Frame AlpS LIEBHERR mm mm Frame AlpS JCB 4CX / 3CX Frame AlpS CAT Frame AlpS MANITOU mm mm Frame AlpS JCB 2CX Frame AlpS LIEBHERR L528 Frame AlpS Krammer mm Frame AlpS JCB Q - Fit Frame AlpS VOLVO ST - MB Frame AlpS VOLVO L30 L mm Frame KOMATSU WB93S WB97S Frame AlpS JCB 4CX Frame AlpS VOLVO L mm Frame AlpS Schaffer 6390T Frame AlpS JCB Q - Fit Frame AlpS TEREX - TL mm Frame AlpS New Holland W170B Frame AlpS LIEBHERR L Frame Liebherr L514 + lighting 34 Attention! The bumpers should be mounted by the customer individually

35 Frame AlpS CAT 906 H, 907 H, 908 H Frame AlpS Merlo ZM - 2 Frame Liebherr L mm mm Frame triangle cat. I Frame NEWHOLLAND LB115B Frame CAT 428F mm mm Frame AlpS Atlas E - Serie Frame Alps DIN B Frame Volvo L50 - L mm mm mm Frame HSW 9.50 M Frame Krammer 880 Frame CAT 432 F2 Attention! The bumpers should be mounted by the customer individually 35

36 Your dealer: SaMASZ Sp. z o.o Zabłudów ul. Trawiasta 1 tel.: fax: samasz@samasz.pl True passion and constant seeking of the best solutions are amongst the ideas, which have been essential for the SaMASZ employees and have become the key to the company s success. What contributes the most to constant and dynamic development of the company are close contact with our customers and staying open to their needs. Thanks to dialogue with our present and future clients and trying to meet their expectations we create and strengthen up the basis of our dynamic success. We are creating the brand, which is already well recognized not only in the whole Europe, but also in the world. Considering constant development as our top priority, we invest in product research. Our employees are the most talented Technical University graduates, who are not only experts in their own fields, but also bring in a great dose of professionalism and passion to their duties. You can always count on their competence and reliability. Today, SaMASZ is the top Polish and one of the major European manufacturers of forage machinery. Our offer includes more than 300 types of different machines: drum mowers, disc mowers, tedders, rakes, flail mowers, extension arms or snow plows. Since the beginning we managed to manufacture and sell more than mowers and few thousands of other machines. We export to more than 50 countries around the world. Our sales network includes approx. 60 companies in Poland and approx. 70 abroad. Our main goal, which is constant development and implementation to our production cutting edge technology in order to keep the world s top quality. We are fully aware, that in this ever changing reality, customers tend to seek trading partners who are trustworthy, and therefore we have an ambition of being considered as a reliable and professional manufacturer. 1 / 2018 Technical data and equipment provided herein, as well as images of the products may be different due to constant technical development.