BEFORE YOU GET STARTED...

Transcription

1 BEFORE YOU GET STRTE... We re con dent you ll love your gorgeous new Next furniture. However, it s worth making absolutely certain before you put it all together. So, let s quickly run through these three steps: 1. COLOUR Make sure you re happy with the colour No need to unpack everything, just check the first component. 2. PROTECTIVE PCKGING If you re happy, then it s time to get opening! Start by laying everything out on the protective packaging this will prevent anything getting scratched. 3. PRTS PGE Finally, double check you have all the pieces by referencing the parts page of the instructions. TIPS FOR RETURNS Not completely happy with the product? No problem. We just need everything back in the original packaging, so follow the steps below and this will ensure a super-smooth returns process and no delay to your refund. O Check everything is there (the parts page is a handy checklist). Pop all the loose fittings and fixtures into the packaging provided or tie them up in a plastic bag. Wrap all the big components back up in the original protective packaging. ON T Leave anything assembled - all components should be dismantled and separately packed. Put loose fixtures and fittings straight into the box. Throw it back in the box carelessly as it may get damaged. Close up the box and seal it securely (don t be afraid to use plenty of tape). Then just give us a call on and we ll sort out a pick up time for you.

2

3 COMPTON ESK ssembly instructions ctual product size H74 x W100 x 45cm H48 x W100 x 15cm IMPORTNT - RETIN FOR FUTURE REFERENCE Need Help? With: ssembly instructions Missing or damaged parts CLL: V1

4 COMPTON ESK ssembly instructions BEFORE YOU STRT Warnings We suggest you retain these instructions for future reference. Keep fittings out of children s reach and keep children well away from the construction area. This product should only be used on firm, level ground. Please periodically check all fittings and re-tighten as necessary. Please do not sit or stand on your furniture. void exposing the furniture to excessive heat or direct sunlight as this can cause deterioration of the colour. Number of people required to assemble Two persons are required to assemble this item. Time to assemble 2 hours Tools required o s We suggest you spend a short time reading through this leaflet before you start. When you are ready to start, make sure that you have the right tools and plenty of space. Unwrap all packaging materials and place the components on a clean surface to protect them from damage. We recommend that the packaging is used to protect the surfaces during assembly. Carefully check that you have all the parts before beginning assembly. ue to the size of the product we recommend that it is assembled in the room intended for use. Ensure the product is fully assembled as illustrated and all fixings are fully tightened before use. Wipe occasionally with a soft cloth slightly dampened with water. Then buff with a dry clean soft cloth. Wood will mellow and change colour over time, we recommend that ornaments and items placed on the surface are moved regularly for the first few months to prevent uneven mellowing. on ts o not drag or pull your furniture. o not use silicone based furniture polish. Silicone in furniture polishes can break down the finish. Never allow any kind of liquid to remain on your furniture. bsorption can cause wood to warp or finishes to de-laminate. o not place hot items (e.g. hot drinks) directly on to the wood surface. Please make sure you use a placement or coaster V1 not supplied Missing parts If you are missing any fixtures and fittings for your product please contact our customer service team on and they will be happy to arrange for a replacement to be sent to you free of charge. Home service technicians If you have a fault with your product please contact our customer service team on If you have had the product for 28 days or less you may be offered a replacement, refund or for a fully trained home service technician to visit your home to assess the fault and repair the product where possible. If you have had the product for more than 28 days we will send an independant home service technician to review and repair the product where possible and recommend further action. You can write to us at Home Customer Services Next Retail Ltd, esford Road, Leicester, LE19 4T not supplied To View our full furniture range please visit 1

5 COMPTON ESK ssembly instructions GETTING TO KNOW YOUR PROUCT C C C C C C C C C C C C C C C C C C C C C V1 2

6 COMPTON ESK ssembly instructions Components supplied. Please use this guide if you require replacement parts. Ref imensions Visual QtyCtn C x 15cm 1 1 C x 15cm 1 1 C x 15cm 1 2 C x 15cm 1 2 C x 13cm 1 2 C x 13cm 1 2 C x 42cm 1 1 C x 45cm 1 1 C x 42cm 1 1 C x 44cm 1 2 C x 44cm 1 2 C x 44cm 1 2 C x 36cm 1 1 C x 25cm 1 1 C x 5cm 1 1 C x 14cm 1 2 C x 14cm 1 2 C x 14cm 1 2 C x 32cm 1 1 C x 37cm 1 1 C x 13cm V1 3

7 COMPTON ESK ssembly instructions Fixtures and fittings supplied (actual size) mm Ref imensions Qty 6 x 43 mm 32 B 15 x 11 mm 20 B2 15 x 12.5 mm 12 8 x 30 mm 42 F 6.3 x 13 mm 8 H1 5 x 15 mm 1 P4 3 x 20 mm 4 T 3 x 13 mm 2 T1 3.5 x 16 mm 4 Q 5 x 50 mm 6 Fixtures and fittings supplied (not to scale) Ref imensions Visual Qty Ref imensions Visual Qty Ref imensions Visual Qty E N/ 6 J2 N/ 2 SR N/ 1 Ref imensions Visual Qty Ref imensions Visual Qty Ref imensions Visual Qty H N/ 4 M N/ 2 V N/ 1 Ref imensions Visual Qty Ref imensions Visual Qty Ref imensions Visual Qty I1 N/ 1 SL N/ 1 Y2 N/ 2 Ref imensions Visual Qty I2 N/ V1 4

8 COMPTON ESK ssembly instructions 1 C CM-LOCK Tighten until shoulder is flush with panel. o not overtighten or undertighten (see example below) Shoulder NO GP x2 Panel Panel V1 5

9 COMPTON ESK ssembly instructions 2 C C Q V V Q C x30mm x4 Vx1 Qx6 5x50mm 5 3 B WHEN FITTING CMS ENSURE STRTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CM-PILLR TURN CLOCKWISE UNTIL SECURE C B CORRECT WRONG Bx2 C V1 6

10 COMPTON ESK ssembly instructions 4 P4 SR P4 SL P4x4 3x20mm SLx1 N/ SRx1 N/ 5 C x v1 7

11 COMPTON ESK ssembly instructions 6 C C x2 8x30mm x6 7 C x30mm x v1 8

12 8 COMPTON ESK ssembly instructions C C E x3 8x30mm x4 Ex4 9 C C E x3 8x30mm x2 Ex V1 9

13 T COMPTON ESK ssembly instructions 10 SL F C T Fx2 6.3x13mm SLx1 N/ PH1 Tx1 3.0x13mm 11 SR F C M Fx2 6.3x13mm SRx1 N/ Mx2 PH1 Tx1 3.0x13mm V1 10

14 COMPTON ESK ssembly instructions 12 WHEN FITTING CMS ENSURE STRTING POSITION IS CORRECT BEFORE YOU INSERT CONNECTING CM-PILLR TURN CLOCKWISE UNTIL SECURE B C CORRECT WRONG C Bx2 13 C B C Bx V1 11

15 COMPTON ESK ssembly instructions 14 C C C B Bx2 15 B C C B C Bx V1 12

16 COMPTON ESK ssembly instructions 16 B C B C Bx1 17 C V1 13

17 COMPTON ESK ssembly instructions 18 B2 B2 B2 C H1 B2x6 H1x1 19 B B Bx V1 14

18 COMPTON ESK ssembly instructions 20 F Y2 C x13mm Fx4 Y2x2 21 C V1 15

19 COMPTON ESK ssembly instructions 22 djusting the doors (adjusting the hinges) V1 16

20 COMPTON ESK ssembly instructions 23 C C x v1 17

21 COMPTON ESK ssembly instructions 24 C C C x4 8x30mm x12 25 J2 T1 C T1 I2 8x30mm x8 T1x4 3.5x16mm I2x2 J2x V1 18

22 COMPTON ESK ssembly instructions 26 C C C B Bx4 27 C B2 C B2x V1 19

23 COMPTON ESK ssembly instructions 28 C B2 B2 C B2x2 29 C B2 B2 B2 B2x V1 20

24 COMPTON ESK ssembly instructions 30 C B Bx4 31 C H Hx V1 21

25 COMPTON ESK ssembly instructions To use this item safely ensure the top section is wallattached to prevent tipping as shown. Wall fixings are not included so please source suitable fixings for your wall type. If in doubt consult a qualified tradesperson. Ø ! 6 I1x V1 22

26 COMPTON ESK ssembly instructions ctual product size H74 x W100 x 45cm H48 x W100 x 15cm 579 mm 365 mm 442 mm 133 mm 225 mm 198 mm 579 mm 310 mm 718 mm 126 mm 313 mm 403 mm 365 mm 409 mm V1 23