FROST LINK A SMOOTH NC. COST CYCLE LONGER YOUR LIFE LOWERS MAKE TRANSITION WITH FROST
|
|
- Anis Warner
- 5 years ago
- Views:
Transcription
1 LINK MAKE A TRANSITION WITH 10 ft. Section GM Fairfax Chain Wear Data Smooth Link Chain Stretch (inches) Ford Motor Company Case Study Chain Wear results for 3,000 ft. of Chain Frost SL Micro-Tuff Weeks of Operation Inches
2 : INDUSTRIESI AUTOMOTIVE FOOD AEROSPACE HEAVY DUTY TRUCK OFF ROAD VEHICLE PAINT FINISHING OFFICE FURNITURE APPLIANCE TO ORDER OR FOR ADDITIONAL INFORMATION PLEASE CONTACT A MEMBER OF OUR SALES TEAM 2900 NORTHRIDGEN ORTHRIDGE,, N.W. GRAND RAPIDS,, MICHIGANM USA TEL: : OR FAX SALES@LINKS LINKS.COM Rev A Rev B
3 THE PRICE RICE = T FOR EXAMPLE: L IFE: : 72 MONTHSM C OST: : $11.00/FT C MONTH: $11.00/72 MONTHSM = $0.16 FOOT MONTH = THE RIGHT PRICE FOR EXAMPLE: FORGED CHAIN SUCH AS MICROTUFF MICROTUFF L IFE: : 32 MONTHSM MICROTUFF C OST: : $11.00/FT MICROTUFF C MONTH: $11.00/32 MONTHSM = $0.35 FOOT MONTH THE CALCULATIONS ABOVE SHOW THAT THE PRICE EQUALS THE LOWEST! Comparison 3000 feet of chain / 102 weeks of use Frost SL MT-15 Ave wear/week - 10' strand " Chain Stretch (inches) Ford Motor Company Case Study Chain Wear results for 3,000 ft. of Chain Frost SL Micro-Tuff Weeks of Operation THE CASE STUDY A Ford Motor Company truck assembly plant in Kentucky collected data over a period of 102 weeks comparing the Frost SL 8640 chain to a forged pin chain such as Microtuff on the same paint line. THE DATA REPORTED SHOWS THAT OVER THE 102 WEEK IOD THE CHAIN IS FAR SUIOR THAN THE FORGED CHAIN SUCH AS MICROTUFF!
4 CHAINC HAIN: BENEFITS Substantially Lower Cost (72 month estimated life cycle) Retains Consistent Job Spacing on the Line (All chain pins wear at the same reduced wear rate) No Initial Maintenance Cost (Eliminates system break-in wear or stretch) Prevents Premature Chain Link Failure (Consistent in microstructure and hardness resulting from computer controlled heat treat) Quieter Running (Smooth running surfaces) Increased Conveyor Drive Life (Less friction lowers the amperage draw) Rev A
5 S FORGED CHAIN SUCH AS MICROTUFF: : DIFFICULTIES Forged pin chains cannot be assembled to precision tolerances (32 month estimated life cycle) Higher Monthly Cost (32 month estimated life cycle) Job Spacing Becomes Compromised (Chain pins wear at varying rates) Always Requires Maintenance Cost (Chain links always need to be removed) Untimely Chain Breaks (Irregularities in microstructure and hardness which result from different temperatures in the heat treat process) Noisy Running (Rough running surfaces) Reduced Conveyor Drive Life (Frictions creates a higher amperage draw on the conveyor system)
6 L in k Sets Smooth Link Inches FORGED CHAIN SUCH AS MICROTUFF: AFTER A 15 MONTHM IOD YOU CAN SEE HOW MUCH VARIATION AND INCONSISTENCY THERE IS WITH THE FORGED CHAIN SUCH AS MICROTUFF. THET MAX ALLOWABLE WEAR LINK SET IS 0.4 INCHES WHICH THE FORGED CHAIN SUCH AS MICROTUFF NEARLY EXCEEDS. PROVE MY POINT YET? Link Sets : : AFTER A IOD OF 3 YEARSY EARS, THE CHAINC SHOWS THAT THE WEAR LINK SET IS 0.1 INCHES AND IT IS CONSISTENT FROM TO. HAT... PROVING THAT ALL S WEAR AT THE SAME REDUCED RATE. Microtuff Inches Rev A
7 CHECK WITH ANY CHAIN USER TO CONFIRM THAT THERE IS NO CHAIN REMOVAL REQUIRED DURING THE NEW CHAIN BREAK IN IOD. Microtuff Smooth Link CHECK WITH ANY CHAIN USER TO CONFIRM THAT CHAINC PREVENTS PREMATURE CHAIN LINK FAILURE. COMPUTERIZED HEAT TREAT,, CONSISTENTC MICROSTRUCTURE, AND 100% PROOFP LOADING IS WHAT MAKES THE DIFFERENCE! IF YOU WANT A CONVEYOR AT A LOWER, BE SURE TO PURCHASE QUALITY PRODUCTS FROM
8 . ALSOA OFFERS CHAINC IN A VARIETY OF SIZES PART NUMBER & SIZE A NOMINAL PITCH B DIAMETER C OUTSIDE LENGTH D MAX CTR LENGTH WIDTH E HEAD WIDTH F MIN CTR LINK WIDTH G MIN SIDE LINK THICKNESS H MAX SIDE LINK DISTANCE I MIN DIAMETER BEARING SURFACE mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm PART NUMBER & SIZE SPECIFICATION: MINIMUM STRENGTH TOLERANCE FOR 10.0FT STRAND (3.05,) MEASURING LOAD WEIGHT 10.0FT STRAND (3.05M) SMX ,500 lbs. 15,649 kg m m lbs kg lbs kg SMX-458 SMX-458 (8640) 57,500 lbs. 26,082 kg 68,000 lbs. 30,852 kg m m lbs kg lbs kg SMX-678 SMX-678 (8640) 110,000 lbs. 49,895 kg 125,000 lbs. 56,715 kg m m Rev A Copyrighted 2006 by Frost Links, Inc lbs kg lbs kg Frost Inc. Warranty Statement I, warrants to the original purchases only, each new product manufactured or supplied by I to be free from defect of material and workmanship under normal use and service. I obligation hereunder shall be limited to furnishing and replacement product for any product which shall, within 12 months after the date of purchase by the original purchaser, be returned by that purchaser to I for examination, having first received I written authorization therefore, and which examination shall disclose the product to have been defective. I is not liable for incidental or consequential damages to such purchaser arising out of any such defect and makes no other warranty of fitness or merchantability expressed or implied. This warranty shall not apply to any I product which has been subjected to negligent or careless handling or use after leaving I custody and control, or which has been repaired, modified, or altered in any way so as, in I judgment, to have adversely affected the product s performance and reliability, nor to any product which had been used for any purpose for which it has not been designed or intended. No one shall have authority to expand or modify the terms of this warranty without the express, written approval of an officer of I Frost & the Frost logo are registered trademarks of Frost, Inc., and cannot be used without the express written permission of an officer of Frost, Inc. CLF015 Rev 8/01 Smooth Link is a registered trademark of Frost and Associates, Inc. Patent number 5,365,765 and 5,378,205. Microtuff is a trademark of Chaparral Steel.
EXACT CHAIN LINK PITCH A SMOOTH CYCLE LOWERS LONGER COST LIFE YOUR LINKS MAKE TRANSITION NC. WITH FROST
FROST S,, INCI NC. MAKE A TRANSITION WITH FROST S INKS,, INCI NC. 10 ft. Section GM Fairfax Chain Wear Data Smooth Link 28 25 22 19 16 13 10 7 4 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Inches Chain Stretch (inches)
More informationFROST. Components and Services for Power & Free Systems ALUMINUM
FROST Components and Services for Power & Free Systems ALUMINUM Frost Company Introduction Frost Incorporated Founded: 1913 Located: 2020 Bristol, N.W. Grand Rapids, MI 49504 Tel: 1.616.453.7781 Fax: 1.616.453.2161
More informationPropane/CNG Solenoid Valve Controller
Propane/CNG Solenoid Valve Controller C-1B-R (Black, Round) C-1C-R (Chrome, Round) Owner s Manual & Installation Instructions Read and comply with all instructions, warnings and limitations before installing,
More informationHPx-JDx3-xx HARNESS INSTALLATION
HPx-JDx3-xx HARNESS INSTALLATION Conversion Manual 09040106b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationModel Series. PumpAgents.com - buy pumps and parts online ELECTRIC BILGE PUMPS. Model Series FEATURES SPECIFICATIONS STANDARD MODELS
PumpAgents.com - Click here for Pricing/Ordering Model 36600-Series ELECTRIC BILGE PUMPS FEATURES Self-Priming Diaphragm Design Allows Dry Running Quiet Operation Built-in Hydraulic Pulsation Dampener
More informationPLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.
PLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.. (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY (1) 3-IN-1 USB CABLE (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY
More informationSeries 2100 Operating Instructions
Series 2100 Operating Instructions Installation Instructions Visit the link below or scan the QR code to watch a detailed installation video: http://triteqlock.com/fresh After the lock, temperature probe,
More informationModel 7500 OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS. Terrco, Inc.
Terrco, Inc. Model 7500 OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS Terrco, Inc. 222 1st Avenue NW Watertown, SD 57201 Phone: (605) 882-3888 Fax: (605) 882-0778 Email: info@terrco.com OPERATING AND
More informationBlinkerBeam Solar Controller
Blinker Division Solar LED Solutions The Route To Safety, One Solution At A Time BlinkerBeam Solar Controller BlinkerSign, BlinkerBeacon or RRFB 2.0 with 55 W Solar Panel User Guide TAPCO Traffic & Parking
More informationInline & 90 Live Swivels Fax:
Inline & 90 Live Swivels www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 CW1602 Super Swivels was established in 1986. Our goal is to manufacture heavy-duty, leak free,
More informationEZ-R7 T-Plug. Universal 7-Pin Heavy Duty Plug For Vehicles equipped with 7-Way Trailer Connectors. Installation Instructions and Product Warranty
EZ-R7 T-Plug Universal 7-Pin Heavy Duty Plug For Vehicles equipped with 7-Way Trailer Connectors Installation Instructions and Product Warranty Professional Installation Required Thank you for purchasing
More informationTRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.
TRUCK PRODUCT LINE 2210 Main Ave W, West Fargo, ND 58078 877.410.7072 www.epgdivision.com A DIVISION OF DAKOTA FLUID POWER, INC. ABOUT US About: Engineered Products Group (EPG), a division of Dakota Fluid
More informationLEXION SINGLE FUNCTION HYDRAULIC VALVE KIT
LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT Conversion Manual 09062010b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022
More information151 Border Machine OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS ILLUSTRATED PARTS LIST
Terrco, Inc. 151 Border Machine OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS ILLUSTRATED PARTS LIST Terrco, Inc. 222 1st Avenue NW Watertown, SD 57201 Phone: (605) 882-3888 Fax: (605) 882-0778 Email:
More informationRENA AF371Feeder Operating Manual. Feeder. Operating Manual. Manual Part #: M AF371 Operations Rev
Manual Part #: M-3022 Feeder AF371 Operations Rev. 3-16-04 1 RENA AF371 Feeder YOUR RENA AF371 IS DISTRIBUTED BY RENA SYSTEMS INC. SERVICE AND SUPPORT FOR THIS PRODUCT IS PROVIDED BY YOUR RENA DEALER.
More informationSaf-T-Bar Conductor Bar T Series
Saf-T-Bar Conductor Bar T Series P/N 964001 2012.04.12 Rev. 6 SERIES T SAF-T-BAR CONDUCTOR BAR 1 Conductix Incorporated The technical data and images which appear in this manual are for informational purposes
More informationDRAGO. Corn Header Manual f HEADSIGHT.COM
DRAGO Corn Header Manual 09020801f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationParts Holding Attachment
Parts Holding Attachment November 2013 by Vehicle Service Group. All rights reserved. CO8812 611312 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants
More information3M Housings CH Series
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M s The CH housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and
More informationGERINGHOFF. Corn Header Manual f HEADSIGHT.COM
GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationReach ins, Freeezers & Refrigerators Installation & Operation Manual
Reach ins, Freeezers & Refrigerators Installation & Operation Manual BSR23 BSF23 BSR49 BSF49 BSR72 BSF72 IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTRUCTIONS) Visit us on the web at www.blueairinc.com
More informationSOLAR DASH CHARGING SYSTEM USER GUIDE
SOLAR DASH CHARGING SYSTEM Doc 1.01 INST049 INSTALLATION STEP 1 Place 20 watt solar panel in the dash of the vehicle facing up. Note: For ideal results position the vehicle in a manner in which the solar
More informationESC Series Engine Shutdown Control
ESC Series Engine Shutdown Control ESC-0604-04D (6 Circuit, (2) 30 Amp, (0) 10 Amp, (4) 2 Amp) ESC-0622-04D (6 Circuit, (2) 30 Amp, (2) 10 Amp, (2) 2 Amp) ESC-0640-04D (6 Circuit, (2) 30 Amp, (4) 10 Amp,
More informationInstallation, Operating & Maintenance Instructions. Hot surfaces; do not touch!
HV Angle valve (Series 263/265) with manual actuator This manual is valid for the valve ordering number(s): 263/26540-QA/H/E01 263/26544-QA/H/E01 The fabrication number is indicated on each product as
More informationEZR7 Universal 7-Pin Heavy Duty Plug Installation Instructions and Product Warranty Professional Installation Required
EZR7 Universal 7-Pin Heavy Duty Plug Installation Instructions and Product Warranty Professional Installation Required Thank you for purchasing our EZ-U7PHD trailer plug! Your choice displays your recognition
More informationSHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS)
SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL SHAW-BOX Rigid Mount I-Beam Trolleys are designed
More informationFlange Spreader Parts and Operating Manual
Mathey Dearman Inc. 4344 South Maybelle Ave. Tulsa, OK 74107 Phone: 800-725-7311 918-447-1288 Fax: 918-447-0188 Flange Spreader Parts and Operating Manual General Information The Flange Spreader is used
More informationEWS FLUID END PARTS LIST
GARDNER DENVER Rev C September 2005 WELL SERVICING PUMP MODEL C-2500 QUINTUPLEX EWS FLUID END PARTS LIST ECN 1027623 C-2500 WELL SERVICING PUMP MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER
More informationForce Test Stands Series ES MODEL ES05
Force Test Stands Series ES MODEL ES05 User s Guide Model ES05 Thank you! Thank you for purchasing a Mark-10 Series ES Force Measurement Test Stand. We are confident that you will get many years of service
More informationAGCO. Corn Header Manual d HEADSIGHT.COM
AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationTABLE OF CONTENTS 10.0 LIMITED WARRANTY
10.0 LIMITED WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions
More information1.0 Introduction Mounting Procedure Verifying Calibration Accuracy Specifications Tension Ranges...
5.0 WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
More informationREDI-LINE. Rugged, Reliable, DC to AC Power Conversion ELECTRIC GENERATORS USER'S GUIDE. KARAM A.L.
REDI-LINE ELECTRIC GENERATORS USER'S GUIDE Rugged, Reliable, DC to AC Power Conversion KARAM A.L. www.alternatorstarter.com 1-888-515-2726 REDI-LINE ELECTRIC GENERATOR MODEL INPUT ACTUAL OUTPUT ACTUAL
More informationINSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL
INSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL Model 7200 Transducers GP:50 2770 Long Road, Grand Island, NY 14072 Tel: 716-773-9300 Fax: 716-773-5019 Email: sales@gp50.com Website: http://www.gp50.com
More informationCORN HEADER MANUAL: CNH PRE-2012
CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:
More informationASSEMBLY / OPERATION INSTRUCTIONS. Low Profile Motorcycle Dolly
ASSEMBLY / OPERATION INSTRUCTIONS 1,500LB CAPACITY Low Profile Motorcycle Dolly Model: 03-CG1500-01(B1) WARNING BEFORE USE PLEASE READ ALL WARNINGS AND INSTRUCTIONS TO PREVENT SERIOUS INJURY Drop-Tail
More informationTank Monitor. Instruction manual DTM01. Tank Monitor
EN Tank Monitor Instruction manual DTM01 Tank Monitor 1 2 3 1 2 4 3 2 1 4 2 Notes on using the manual Table of contents EN 1 Notes on using the manual 3 2 General safety instructions 3 3 Intended use 4
More informationTAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
More information12-1/4 x 3-1/2 Electric Wheel Brake
12-1/4 x 3-1/2 Electric Wheel Brake A-216 819-0244 Installation Instructions An Altra Industrial Motion Company Contents Dimensions.... 2 Technical Specifications.... 3 Installation Instructions General....
More informationHV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC)
HV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 26... 26428 -K A 61 A..
More informationInstallation Manual 2019 Ram wd. 2 front leveling kit. Part # Part # Ram wd (will not fit Air ride models)
Installation Manual 2019 Ram 1500 4wd 2 front leveling kit Part # 32105 SS09062018 Part # 32105 2019 Ram 1500 4wd (will not fit Air ride models) 2 front leveling kit Part # Description Qty. 32105-01 Aluminum
More informationModel D Spray Gun. Parts Identification Manual 2943J-ID. "Success through Unity" June 17, 2003 Issue 2 GUSMER CORPORATION
"Success through Unity" Model D Spray Gun Parts Identification Manual 2943J-ID June 17, 2003 Issue 2 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood, New Jersey,
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationERD Electrically Released Brakes
ERD Electrically Released Brakes P-229 819-0453 Installation Instructions Warner Electric s ERD series spring set, electrically released brakes are designed to hold a load when the power to the brake is
More informationRCL-7A. User s Guide. Battery Charging Station. Technology in Depth
RCL-7A Battery Charging Station User s Guide Technology in Depth - NOTICE - This manual and the information contained herein are provided for use as a maintenance and operation guide. No license or rights
More informationBlue Air. Commercial Refrigeration Inc. Installation & Operation Manual Chef Bases
Blue Air Commercial Refrigeration Inc. Installation & Operation Manual Chef Bases Please read this manual completely before installing or operating this unit! BACB53 BACB71 BACB74 BACB83 BACB86 BACB96
More informationMODEL G300 Brake Bleeder
MODEL G300 Brake Bleeder Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 Rev013107 P/N: 81-0035C CAUTION Before using
More informationSmoke Leak Locator. User Manual. For Models: Pro S 25, Pro S 75, Pro S 500T, Pro S 600T, Pro S 1000HD. Ceramic Heating Technology
Smoke Leak Locator User Manual For Models: Pro S 25, Pro S 75, Pro S 500T, Pro S 600T, Pro S 1000HD Ceramic Heating Technology www.proflex-plus.com All models come with a User Manual, Quick Start Guide,
More informationMTB II Modular Tension Brakes
P-259-1 819-0342 MTB II Modular Tension Brakes Installation Instructions An Altra Industrial Motion Company Introduction The instructions on this sheet cover installation of all replacement components
More informationAGCO Conversion Manual a HEADSIGHT.COM
AGCO 3300 Conversion Manual 09040404a HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationInstructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter
Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic
More informationASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.
Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read
More informationIn-Line Linear Actuator
In-Line Linear Actuator Operating Instructions 12 Volt DC Input Australian Gas Springs - LiftEasy Actuators Address: 29 Tower Court Noble Park Victoria 3174 Australia Telephone: +61 3 9769 0288 Fax: +61
More informationINSTALLATION MANUAL FRONT PROGRESSIVE ADD-A-LEAF LEVELING SYSTEM 1998 CURR FORD SUPER DUTY F250 - F350 OLD PART # F2358B NEW PART # 22958
INSTALLATION MANUAL FRONT PROGRESSIVE ADD-A-LEAF LEVELING SYSTEM 1998 CURR FORD SUPER DUTY F250 - F350 OLD PART # F2358B NEW PART # 22958 SJ093002 OLD PART NUMBER : F2358B NEW PART NUMBER : 22958 1998
More informationRectangular Door L-VAT with pneumatic actuator double acting
Rectangular Door L-VAT with pneumatic actuator double acting This manual is valid for the products: 0 7 5 1 0 U A 2 4 0 0 0 1 4 character option code Size 10... 46 x 236 12... 50 x 336 Actuator 24... without
More informationCleaning System. Instructions/Parts A
Instructions/Parts Cleaning System 310623A 234533 For use with Multi-Orifice Linear Streaming Applicator (MOLSA) to apply automotive Liquid Applied Sound Deadener (LASD) materials. 100 psi (0.68 MPa, 6.8
More informationInstallation and Parts Manual for SPANCO PF Series Gantry Cranes
Manual No. 103-0003 REV. 08/14 Installation and Parts Manual for SPANCO PF Series Gantry Cranes ISO 9001 REGISTERED SPANCO, Inc. 2 INSTALLATION AND PARTS MANUAL FOR PF SERIES GANTRIES TABLE OF CONTENTS
More information80PK-2A Type K Immersion Probe
80PK-2A Type K Immersion Probe Instruction Sheet WARNING TO AVOID ELECTRICAL SHOCK, DO NOT USE THIS PROBE WHEN VOLTAGES EXCEEDING 24V AC RMS OR 60V DC ARE PRESENT. THE PROBE TIP IS ELECTRICALLY CONNECTED
More informationDC Distribution Panel User Guide # S
DC Distribution Panel User Guide # S2-61256-100 68-11926-100 Standard Limited Hardware Warranty LIMITED WARRANTY. Equipment manufactured by CTI Products, Inc. is warranted to be free from defects in material
More informationTRI-GLIDE. 3 Point Load Moving Solution
TRI-GLIDE 3 Point Load Moving Solution FEATURES & BENEFITS The Hilman Tri-Glide provides a stable, efficient solution for moving heavy loads. It is designed with a large footprint to spread the weight
More informationInstallation & Operation Manual Chef Base
Installation & Operation Manual Chef Base Please read this manual completely before installing or operating this unit! BACB53 BACB53M BACB71 BACB71M BACB74 BACB74M BACB83 BACB83M BACB86 BACB86M BACB96
More informationHS583 Sprocket Models- Curtain/Vent Machine
HS583 Sprocket Models- Curtain/Vent Machine Installation Manual General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related
More informationUltimate 5th Wheel Connection Rail Mount. Part #3200 Gooseneck Mount, 20,000 lbs GTWR - 4,500 lbs Tongue INSTALLATION MANUAL
Ultimate 5th Wheel Connection Rail Mount Part #3200 Gooseneck Mount, 20,000 lbs GTWR - 4,500 lbs Tongue INSTALLATION MANUAL andersenhitches.com Table of Contents Table of Contents Important Safety Information...
More informationBELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT
BELOW-THE-HOOK & MATERIAL HANDLING EQUIPMENT lifting EQUIPMENT Tongs HBTF Bar Tong Fixed... Page 62 TONGS HBTA Bar Tong Adjustable... Page 63 lifting EQUIPMENT HBTF BAR TONG FIXED FEATURES This style of
More informationASSEMBLY OF TROLLEY TO HOIST
INSTRUCTIONS AND PARTS LIST RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL Yale Rigid Mount I-Beam Trolleys are designed especially for use on
More informationOwner s Manual. Soda Ash ph Neutralizer System
Owner s Manual Page 2 Copyright 2011 Enviro Water Solutions Inc. All rights reserved. All information contained herein is the property of Pelican Water Systems. Pelican Water Systems makes no warranty
More informationSRSA limited warranty Policy and Procedure
Document Number: W 01 Rev 07 Issued : 2013-07-31 Review date : 2016-12-02 Reg No. 1997/021619/07 Building 1, Lion Match Office Park, 892 Umgeni Road, Durban KwaZulu-Natal, South Africa, 4001 PO Box 925,
More informationMP/MTFL LIGHT FIXTURE (Dimming)
Robern 701 N. Wilson Ave. Bristol, PA 19007 800.877.2376 MP/MTFL LIGHT FIXTURE (Dimming) General Notes 1. It is important that the armored cable be installed during electrical rough in. 2. When surface
More informationInstallation, Operating & Maintenance Instructions. Series 081, DN (I.D. 2½" - 4") Hot surfaces; do not touch!
Vacuum Gate Valve This manual is valid for the valve ordering number(s): 08136-FA14/24/34/44 08138-FA14/24/34/44 08140-FA14/24/34/44 The fabrication number is indicated on each product as per the label
More informationPOWER END PARTS LIST
GARDNER DENVER 302WPD997 Rev B April 2008 WELL SERVICING PUMP MODEL GD-600 POWER END PARTS LIST ECN 1040704 GD-600 WELL SERVICING PUMP MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER
More informationNota Conductor s Chair
Assembly and Operation Instructions Nota Conductor s Chair CONTENTS Important User Information...........................2 General......................................2 Manufacturer.................................2
More informationFlo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
More informationPIPE FITTING ACCESSORIES EFFECTIVE FEBRUARY 5, 2018
CANADIAN IMPORT PRICE LIST PIPE FITTING EFFECTIVE FEBRUARY 5, 2018 version: EFFECTIVE: FEBRUARY 5, 2018 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax: (951)
More informationCOMMAND SERIES 410-L T L T T T L06R RS PRODUCT MANUAL
COMMAND SERIES 40-L06 40-T09 420-L06 420-T06 420-T09 420-T5 420-L06R 420-009RS PRODUCT MANUAL TABLE OF CONTENTS COMMAND REFERENCE GUIDE INTRODUCTION Command Reference Guide 3 Physical Characteristics &
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationPENBERTHY MODELS GL AND GH GAS OPERATED JET PUMPS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood. PRODUCT WARRANTY Emerson warrants its Penberthy products as designed and manufactured to be free of defects in the material
More informationModel , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover
Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame
More informationTachometer. English. Users Manual
931 Tachometer Users Manual English PN 3409877 January 2009 2009 Fluke Corporation, All rights reserved. Printed in Germany. Specifications are subject to change without notice. All product names are trademarks
More informationPro-Series/ Electromechanical Linear Actuator
Pro-Series/ Electromechanical Linear Actuator Installation and Operation Manual P-264-PROSERIES (08/10) Keep all product manuals as a product component during the life span of the product. Pass all product
More informationBuck BioAire Model B520 Instruction Manual
A.P. BUCK, INC. Buck BioAire Model B520 Instruction Manual A.P. BUCK, INC. 7101 Presidents Drive Suite 110 Orlando, FL 32809 USA Tel 1-800-330-2825 407-851-8602 Fax 407-851-8910 apbuck@apbuck.com www.apbuck.com
More informationCAUTION 7.0 WARRANTY CONTENTS. 1.0 Overview... 2
7.0 WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
More informationIMPORTANT INFORMATION
IMPORTANT INFORMATION Issue Date 2018 Catalog 4x4QR 2018 Please read the following important information before using this Catalog: ALWAYS CONSULT AND REVIEW THE ORIGINAL MANUFACTURERS INSTRUCTION MANUAL(S)
More informationJD 900F TILT SENSOR INSTALLATION
JD 900F TILT SENSOR INSTALLATION Conversion Manual 09040108b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationCathodic Protection Test Boxes
Introducing our expanded line of Cathodic Protection Test Boxes #12 Quality Products Crafted with Pride in America TO ORDER Call (540) 825-8334 Fax (540) 825-2173 Visit our website at www.binghamandtaylor.com
More informationSIDESLIDE SERIES C-CLAMP 940K-010FI BOLT 940K-010RSC PICATINNY 940K-010PIC PRODUCT MANUAL
SIDESLIDE SERIES C-CLAMP 940K-00FI BOLT 940K-00RSC PICATINNY 940K-00PIC PRODUCT MANUAL SIDESLIDE REFERENCE GUIDE PHYSICAL CHARACTERISTICS LOCKING GROOVE ANTI-ROLL HEAD POWER/MODE SWITCH TAILCAP Please
More informationBlue Air. Commercial Refrigeration Inc. Installation & Operation Manual Glass Door Countertop Refrigerator
Blue Air Commercial Refrigeration Inc. Installation & Operation Manual Glass Door Countertop Refrigerator Please read this manual completely before installing or operating this unit! BAGR7 Blue Air reserves
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More informationHighLuxV2-Zenigata Series
Features Light source: 3.6W Zenigata power LED Source life: More than 30,000 hours Low heat, no UV or IR light radiation Homogeneous and well defined illumination Highest Luminous Efficacy: 50 lm/watt
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationModel P-40 & Model P-25 POWER PUSHER
Power Pusher Description INSTRUCTION MANUAL The Power Pusher provides ram capability by using the spreading power of the POWER HAWK P-16 Rescue Tool. (The Power Pusher may also be used with other spreader
More informationRhino HPP18V FLEX Hydraulic Powerpack
Rhino HPP18V FLEX Hydraulic Powerpack Revised 1.2016 Prior to Operation We thank you for choosing a Rhino Powerpack. Please note that the powerpack is delivered without hydraulic oil, and therefore it
More informationInstallation, Operating and Maintenance Manual
. Installation, Operating and Maintenance Manual TK 240 Tank Cleaning and Fuel Restoration System www.dieselfueltech.com Email: vernon@dieselfueltech.com Phone: +61 (0) 419 795 676 1 www.dieselfueltech.com
More informationHWP2/HWP3/HWP4 Hydraulic Submersible Pumps
HWP2/HWP3/HWP4 Hydraulic Submersible Pumps 2-3 -4 Revised 6/10/2016 Prior to Operation We thank you for choosing a Rhino submersible pump. To ensure smooth operation and long-lasting performance of your
More informationInstallation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator
www..c Installation & Operation Manual Electrak 100 Series / Electromechanical Linear Actuator Thomson has many years of experience designing and manufacturing linear actuators for a wide variety of applications
More informationUHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)
UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product
More informationFOLD CONTROL FOR 600FC
FOLD CONTROL FOR 600FC Conversion Manual 09040122b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationPressurized Pond Filter Up to 850 gallons
Pressurized Pond Filter Up to 850 gallons REMINER CALL 1-888-755-4497 EFORE RETURNING TO STORE. MOEL/MOELO #PZF850 Questions, problems, missing parts? efore returning to your retailer, call our customer
More informationModel Railroad Circuit Breaker (CB-1)
Model Railroad Circuit Breaker (CB-1) User Manual Ring Engineering Inc. (219) 322-0279 www.ringengineering.com Revision 1.11 Copyright 2018 Ring Engineering Inc. All rights reserved. Introduction Thank
More informationSW Series Sweeper. Gaylord Sweeper Evacuation System. Models: SW-4815 SW-4820 SW-4825 SW SERIES SWEEPERS MAGUIRE PRODUCTS INC.
MAGUIRE PRODUCTS INC. SW SERIES SWEEPERS Models: SW-4815 SW-4820 SW-4825 SW Series Sweeper Gaylord Sweeper Evacuation System INSTRUCTION AND OPERATION MANUAL Original Instructions Manual Revision Date:
More information