Compliance List of Automotive Safety Devices

Size: px
Start display at page:

Download "Compliance List of Automotive Safety Devices"

Transcription

1 February 3, 2017

2 Compliance List of Automotive Safety Devices Hydraulic, Air and Plastic Brake Hose and End Fittings For Three-Year Period February 3, 2017 Update Automotive Manufacturers Equipment Compliance Agency, Inc Connecticut Avenue, NW Suite #1012 Washington DC

3 FOREWORD This publication is a compilation of regulated motor vehicle safety equipment items which have been tested to recognized standards by accredited testing laboratories and found to be in compliance with jurisdictional requirements as overseen by the Automotive Manufacturers Equipment Compliance Agency, Inc (AMECA). The AMECA Compliance List is published in monthly and contains all valid AMECA Notice s of Equipment Compliance issued during the previous three years plus any new compliance documents added in the previous month. The monthly Compliance List is uploaded to the website under the page titled: Handbook of Compliant Automotive Safety Devices. This web-based accessibility allows jurisdictions all-hours field access to information relevant to accident investigations, anti-counterfeit actions, and compliant product purchasing. If you would like to receive notification of the updated AMECA Compliance List please send an to: Subscriptions@ameca.org with the sections you wish to receive in the body of the . Every effort is made to accurately report all new, renewed and revised items from every AMECA compliant participating manufacturers. Your suggestions are always welcome and AMECA is proud to serve law enforcement at every level. AMECA exists to serve you. Information relative to the preparation of submissions for Notices of Equipment Compliance can be found in the Manufacturers Guide for Safety Equipment Compliance Services. This guide also contains general AMECA program information. A complete listing of safety-related items covered by AMECA is also available at Grateful acknowledgment is made to those who have cooperated in making this listing possible. These Devices Are Listed In Alphanumeric Sequence By Company.

4 AMECA List of FMVSS 106 Compliant Air Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Size Brass Pro Industrial 3/8 DOT Q.V A SAE J844 DOT 3/8 A 3/8 DOT Q.V A 3/ Brass Pro Industrial Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey Eaton Polimer Kauçuk San. Ve Paz. A.Ş. Turkey 1/2 DOT Q.V A SAE J844 DOT SEL 3/16 AII DOT SEL 1/4 AII DOT SEL 5/16 AII DOT SEL 13/32 AII DOT SEL 1/2 AII DOT SEL 5/8 AII DOT 1/2 A 1/2 DOT Q.V A 1/ Meiji Flow System Co., DOT MRCC 1/2 HL DOT SEL 3/16 AII DOT EATON 1/4 AII DOT EATON 5/16 AII DOT EATON 13/32 AII DOT EATON 1/2 AII DOT EATON 5/8 AII MRCC MH Meiji Flow System Co., DOT MRCC 13/32 A 2B1 MRCC MH None 13/32 3/16 1/4 5/16 13/32 1/2 5/8 1/ Nanjing Orientleader Technology Co., Nanjing Orientleader Technology Co., Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp. DOT ORLETE GB16897 CCC I mm A SAE J1402 DOT ORLETE GB16897 CCC I mm A SAE J1402 ARKER mm (13/32) SAE J1402 WP 14,0 MPa (2000 PSI) SAE 100R5 MADE IN MEXICO PARKER ,5 mm (1/2) SAE J1402 WP 12,2 MPa (1750 PSI) SAE 100R5 MADE IN MEXICO PARKER mm (5/8) SAE J1402 WP 10,5 MPa (1500 PSI) SAE 100R5 MADE IN MEXICO PARKER mm (3/16) SAE J1402 WP 21,0 MPa (3000 PSI) SAE 100R5 MADE IN MEXICO AIR BRAKE HOSE DOT ORLETE A 10mm 10mm AIR BRAKE HOSE DOT ORLETE A 13mm 13mm AIR BRAKE DOT SE027 13/32 AII AIR BRAKE DOT SE027 1/2 AII AIR BRAKE DOT SE027 5/8 AII AIR BRAKE DOT SE027-3/16 - AII DOT AII P (DATE ) 13/32 R5-8 DOT AII P (DATE ) 1/2 R5-10 DOT AII P (DATE ) 5/8 R5-12 DOT AII P (DATE ) 3/16 R5-4 13/32 1/2 5/8 3/16 1

5 AMECA List of FMVSS 106 Compliant Air Brake Hose Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Parker Hannifin Corp Company Markings - One Side Markings - Other Side End Fitting Markings Size Qingdao Vih Hose Co., Qingdao Vih Hose Co., Qingdao Vih Hose Co., Qingdao Vih Hose Co., Zhuji Import Auto Parts Factory PARKER ,3 mm (1/4) SAE J1402 WP 21,0 MPa (3000 PSI) SAE 100R5 MADE IN MEXICO PARKER mm (5/16) SAE J1402 WP 15,7 MPa (2250 PSI) SAE 100R5 MADE IN MEXICO PARKER AIR BRAKE 1/4 SAE J1402 A DOT A 6,3 A WP 1,6 MPa (225 PSI) PARKER AIR BRAKE 3/8 SAE J1402 A DOT A 9,5 A WP 1,6 MPa (225 PSI) PARKER AIR BRAKE 1/2 SAE J1402 A DOT A 12,7mm A WP 1,6 MPa (225 PSI) PARKER AIR BRAKE 8 mm (5/16) SAE J1402 WP 3,5 MPa (500 PSI) PARKER AIR BRAKE 10 mm (13/32) SAE J1402 WP 3,5 MPa (500 PSI) PARKER AIR BRAKE 12.5 mm (1/2) SAE J1402 WP 3,5 MPa (500 PSI) AIR BRAKE DOT SE027 1/4 - AII AIR BRAKE DOT SE027 5/16 AII DOT AII P (DATE ) 1/4 R5-5 DOT AII P (DATE ) 5/16 R5-6 (None Permanently Attached) 1/4 5/16 1/4 DOT P 3/8 3/8 DOT P 1/2 1/2 DOT 5/16 AII DOT 13/32 AII DOT 1/2 AII DOT AII P 5/16 R5-6 (DATE, LOT, DOT MANUFACTURER) AII -P 13/32 R5-8 (DATE, LOT, DOT MANUFACTURER) AII P 1/2 R5-10 (DATE, LOT, MANUFACTURER) DOT VIHTECH 3/8 SAE J1402 AIR BRAKE HOSE A VIHTECH VIHTECH DOT 3/8 DOT VIHTECH 1/2 SAE J1402 AIR BRAKE HOSE A VIHTECH VIHTECH DOT 1/2 DOT VIHTECH 3/8 SAE J1402 AIR BRAKE HOSE A VIHTECH VIHTECH DOT 3/8 DOT VIHTECH 1/2 SAE J1402 AIR BRAKE HOSE A VIHTECH VIHTECH DOT 1/2 AIR BRAKE SAE J1402 A DOT TYPE S 3/8" O.D. ANCT 5/16 13/32 1/2 DOT XL 3/8 2

6 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Allegri Cesare DOT B.H. SAE J1401 3MM H.L. BH DOT Allegri Cesare DOT B.H. SAE J1401 3MM H.L. BH DOT Allegri Cesare DOT B.H. SAE J1401 3MM H.L. BH DOT Allegri Cesare DOT B.H. SAE J1401 2MM H.L BH DOT Allegri Cesare DOT B.H. SAE J1401 2MM H.L. BH DOT Allegri Cesare DOT B.H. SAE J1401 2MM H.L. BH DOT Carflex Auto Parts Co., SAE J1401 1/8 HL DOT CARFLEX FTE Automotive GmbH FTE k T FTE Automotive GmbH DOT FTE 1/8 HL >CR/EPDM< FTE Automotive GmbH DOT FTE 1/8 HL >EPDM< FTE Automotive GmbH DOT FTE 1/8 HL FTE T407 CR.EPDM FTE Automotive GmbH DOT FTE 1/8 HL FTE T FTE Automotive GmbH DOT FTE 3.2 HL 5484 SAE J T456 Metal Band: SAE J1401 1/8 HL DOT CARFLEX (logo) K001 FTE (logo) 363E.425E.0F CZ FTE 0504 ( K FTE DE 410E.437E.0 CZ FTE E.621E.0 CZ FTE K925 FTE Hutchenson Nicherin Brake Hoses SL DOT (TRADE MARK) HUTCHINSON 1078 SAE J MM HL GB CCC AB 0752 DOT (TRADE MARK) HUTCHINSON 1078 SAE J MM HL GB CCC AB 0752 (EXTRUSION TIME-DATE- BATCH NO.) (TRADE MARK)

7 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Hutchenson Nicherin Brake Hoses SL J. Juan, S.A J.JUAN Brake hose Kenswell DOT (TRADE MARK) HUTCHINSON 9678 SAE J MM HL GB CCC AB 2224 (DATE, LOT #) (J.JUAN LOGO) J.JUAN SAE J1401 1/8 HL DOT (DATE, LOT NUMBER) J. JUAN SAE J1401 1/8 HL DOT DOT KENSWELL 3.5MM HL SAE J1401 JIS D2601 DOT (TRADE MARK) HUTCHINSON 9678 SAE J MM HL GB CCC AB 2224 (EXTRUSION TIME-DATE- BATCH NO.) (TRADE MARK) J.JUAN J.JUAN KENSWELL R F Lung Ming Li Co., DOT LML SAE J MM HL LML DOT CEF 1/8 HL SAE J DOT CEF ITALY DOT CEF 1/8 HL SAE J DOT CEF ITALY CCC I DOT CEF 1/8 HL SAE J CCC I DOT CEF 1/8 HL SAE J CCC I DOT CEF 1/8 HL SAE J CEF DOT CEF DOT CEF DOT China DOT CEF 1/8 HL SAE J DOT CEF ITALY China DOT CEF 1/8 HL SAE J DOT CEF ITALY China DOT CEF 1/8 HL SAE J DOT CEF ITALY CEF MINERAL /8 HL DOT CEF DOT CEF MINERAL /8 HL DOT CEF DOT

8 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings CEF MINERAL /8 HL DOT CEF DOT CEF 014 PTFE 1/8 SAEJ 1401 HL DOT CEF 014 PTFE 1/8 SAEJ 1401 HL DOT CEF 014 PTFE 1/8 SAEJ 1401 HL DOT CEF DOT CEF DOT CEF DOT DOT CEF 1/8 HL SAE J 1401 CEF DOT DOT CEF 1/8 HL SAE J 1401 CEF DOT DOT CEF 1/8 HL SAE J 1401 CEF DOT CEF 013 PTFE 3/16 SAE J 1401 HL CEF DOT CEF 015 PA 1/8 SAEJ 1401 HL DOT CEF DOT CEF 015 PA 1/8 SAEJ 1401 HL DOT CEF DOT CEF 015 PA 1/8 SAEJ 1401 HL DOT CEF DOT DOT CEF 054 PTFE 2.0 MM SAEJ 1401 HL DOT CEF 054 PTFE 2.0 MM SAEJ 1401 HL DOT CEF 054 PTFE 2.0 MM SAEJ 1401 HL Meiji Flow Systems MEIJI JAPAN BY NO95-9 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BY NO95-9 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BY NO95-9 SAE J1401 DOT MRCC 1/8 HL CEF DOT CEF DOT CEF DOT NUMBER) MH NUMBER) MH NUMBER) ML275074

9 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL Meiji Flow Systems MEIJI JAPAN BJ NO95-7 SAE J1401 DOT MRCC 1/8 HL NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK NUMBER) MK Multi Parts Supply DOT QDHN-LD 3/16 HL GB HN SAE J1401 QDHN-LD DOT Multi Parts Supply DOT QDHN-LD 1/8 HL GB HN SAE J1401 QDHN-LD DOT Multiproducts Sarl DOT CEF 1/8 HL SAE J DOT CEF ITALY Multiproducts Sarl DOT CEF 1/8 HL SAE J DOT CEF ITALY Multiproducts Sarl DOT CEF 1/8 HL SAE J DOT CEF ITALY

10 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Nanjing Orienteer DOT ORLETE 1/8 HL 3310 SAE J1401 GB16897 ORLETE CCC I Φ3.2mm HL Nelson Stokes NELSON 1/8 HL DOT SAE J1401 ORLETE 15K1 NS (NELSON STOKES LOGO) Qingdao KST Technology Inc. KST SAE J1401 DOT 1/8 HL KST Qingdao Sunsong Co., SUNSONG DOT SAE J1401 3/16 HL SUNSONG Rainbow Trust Industrial Co., DOT (RAINBOW TRUST LOGO) RBT 1/8 HL SAE J1401 (RAINBOW TRUST LOGO) Sealing and Brake Hoses Extrusion S.r.l. DOT SBH EXTRUSION S.r.l. 1/8 HL 3320E SAE J1401 (TIME) 2165 (SBH EXTRUSION S.r.l. LOGO) DATE Sealing and Brake Hoses Extrusion S.r.l. DOT SBH EXTRUSION S.r.l. 1/8 HL 3811B SAE J1401 (TIME) (SBH EXTRUSION S.r.l. LOGO) DATE Taizhou Xinli Machinery Manufacture Co., XINLI (XINLI LOGO) BRAKE HOSE 1/8 HL SAE J1401 TAIZHOU XINLI DOT XL TBO Mex S.A. de C.V. DOT-SUNSONG SAE J1401 1/8 HL (TRADE MARK) Teklas Kaucku San Ve Tic A.S. DOT TEKLAS 1/8 HL Teklas Kaucku San Ve Tic A.S. DOT TEKLAS 1/8 HL Teklas Kaucku San Ve Tic A.S. DOT TEKLAS 1/8 HL Teklas Kaucku San Ve Tic A.S. DOT TEKLAS 1/8 HL Teklas Kaucku San Ve Tic A.S. DOT TEKLAS 1/8 HL Teklas Kaucuk San ve. Tic. A.S. DOT TEKLAS 1/8 HL Teklas Kaucuk San ve. Tic. A.S. DOT TEKLAS 1/8 HL TEKLAS SAE J1401 >EPDM< 3,2MM TEKLAS SAE J1401 >EPDM< 3,2MM TEKLAS SAE J1401 >EPDM< 3,2MM TEKLAS SAE J1401 >EPDM< 3,2MM TEKLAS SAE J1401 >EPDM< 3,2MM TEKLAS TFH 03 SAE J1401 >EPDM< >EPDM< 3,2MM TEKLAS TFH 03 SAE J1401 >EPDM< >EPDM< 3,2MM

11 AMECA List of FMVSS 106 Hydraulic Brake Hose Teklas Kaucuk San ve. Tic. A.S Teklas Kaucuk San ve. Tic. A.S Teklas Kaucuk San ve. Tic. A.S. Company Markings - One Side Markings - Other Side End Fitting Markings DOT TEKLAS 1/8 HL DOT TEKLAS 1/8 HL DOT TEKLAS 1/8 HL TEKLAS TFH 03 SAE J1401 >EPDM< >EPDM< 3,2MM TEKLAS TFH 03 SAE J1401 >EPDM< >EPDM< 3,2MM TEKLAS TFH 03 SAE J1401 >EPDM< >EPDM< 3,2MM Teklas Kauçuk San. Ve Tic. A.S. TFH 01 SAE J1401 EPDM DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. TFH 01 SAE J1401 EPDM DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. TFH 01 SAE J1401 EPDM DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. TFH 01 SAE J1401 EPDM DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. DOT TEKLAS 1/8 HL Teklas Kauçuk San. Ve Tic. A.S. DOT TEKLAS 1/8 HL Veyance (Qingdao) Engineered Elastomers Co., TFH 02 SAE J1401 >EPDM< >EPDM< TFH 02 SAE J1401 >EPDM< >EPDM< TFH 02 SAE J1401 >EPDM< >EPDM< TFH 02 SAE J1401 >EPDM< >EPDM< DOT VQ 1/8 HL SAE J1401 VQ 3.2MM EPDM VQ Yantai Pichon Auto Parts Co., DOT SAE J1401 MXB 1/8 HL MXB

12 AMECA List of FMVSS 106 Hydraulic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings

13 AMECA List of FMVSS 106 Compliant Vacuum Brake Hose DTR Industries Company Markings - One Side Markings - Other Side Diameter DOT (DTR LOGO) (DATE/LOT NUMBER) 11/32 >CR,NBR< 11/32" DTR Tennessee DOT (DTR LOGO) (DATE/LOT NUMBER) 11/32 >CR,NBR< Vacuum 11/32" Hebei Chinaust Automotive Plastics DOT CHINAUST PLASTICS 10mm OD (( 10X1.25) VL Meiji Flow Systems DOT MRCC 11/32 VL (MEIJI LOGO) 11/32 SAE J1403 LWA Pyung Hwa Industrial. Co., PH DOT 11/32 SAE 1403A VL EPDM 11/32" Sumitomo Riko Co., (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL CR,NBR 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL CR,NBR 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL CR,NBR ɸ8MM 8 mm Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL CR,NBR 11/32" Sumitomo Riko Co., DOT ittc (LOT/DATE) 11/32 VL >ECO< 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL >CR,NBR< 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL >CR,NBR< 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) (LOT/DATE) 11/32 VL >EPDM< 11/32" Sumitomo Riko Co., DOT (SUMITOMO RIKO LOGO) TRI (LOT/DATE) 11/32 VL >CR,NBR< 11/32" Sumitomo Riko DOT TRHI (PT TOKAI RUBBER AUTO HOSE INDONSIA Company LOGO) (LOT/DATE) 11/32 VL >CR,NBR< 11/32" Tieto Rubber Ltd (TEITO LOGO) CR, NBR+PVC 8.7 MM VL DOT 8.7mm Tokai Rubber Industries DOT (ittc LOGO) 11/32 VL CR,NBR 11/32" Tokai Rubber DOT (TOKAI RUBBER LOGO) 11/32 VL ECO 11/32" Industries Tokai Rubber DOT (TRD LOGO) 11/32 VL EPDM 11/32" Industries 10mm 11/32" 10

14 AMECA List of FMVSS 106 Compliant Brake Hose End Fittings Company Markings - One Side Diameter Guang Yang Industrial Works DOT A 3/8 OD TAC 3/8" Guang Yang Industrial Works DOT A 1/4 OD TAC 1/4" Guang Yang Industrial Works 5/8 Air Brake Hose 5/8" Just In Hardware Co., JIH DOT A 1/4" OD 1/4" Just In Hardware Co., JIH DOT A 3/8 OD 3/8" Just In Hardware Co., JIH DOT A 1/2" OD 1/2" Just In Hardware Co., JIH DOT A 1/4" OD 1/4" Just In Hardware Co., JIH DOT A 3/8 OD 3/8" Just In Hardware Co., JIH DOT A 1/2 OD 1/2" Just In Hardware Co., JIH DOT A 1/4" OD 1/4" Just In Hardware Co., JIH DOT A 3/8 OD 3/8" Just In Hardware Co., JIH DOT A 1/2" OD 1/2" Just In Hardware Co., JIH DOT A 1/4" OD 1/4" Just In Hardware Co., JIH DOT A 3/8 OD 3/8" Just In Hardware Co., JIH DOT A 1/2" OD 1/2" Just In Hardware Co., JIH DOT A 3/8" OD 3/8" Just In Hardware Co., JIH DOT A 1/2" ID 1/2" Oriental Export Corporation OEC DOT A 1/4 1/4" Oriental Export Corporation OEC DOT A 3/8 3/8" Oriental Export Corporation OEC DOT A 1/2 1/2" Oriental Export Corporation OEC DOT A 5/8 5/8" Oriental Export Corporation OEC DOT A 1/4 OD 1/4" Oriental Export Corporation OEC DOT A 3/8 OD 3/8" Oriental Export Corporation OEC DOT A 1/2 OD 1/2" Oriental Export Corporation OEC DOT A 5/8 OD 5/8" Oriental Export Corporation OEC DOT A 3/4 OD 3/4" Oriental Export Corporation OEC DOT A 3/8 3/8" Oriental Export Corporation OEC DOT A 1/2 1/2" 11

15 PlasAMECA List of FMVSS 106 Compliant Plastic Brake Hose Company Markings - One Side Markings - Other Side End Fitting Markings Brass Pro Industrial 1/4 DOT Q.V A SAE J844 DOT 1/4 A 1/4 DOT Q.V A Brass Pro Industrial 3/8 DOT Q.V A SAE J844 DOT 3/8 A 3/8 DOT Q.V A Brass Pro Industrial 1/2 DOT Q.V A SAE J844 DOT 1/2 A 1/2 DOT Q.V A Brass Pro Industrial 5/8 DOT Q.V A SAE J844 DOT 5/8 A 5/8 DOT Q.V A Brass Pro Industrial 3/4 DOT Q.V A SAE J844 DOT 3/4 A 3/4 DOT Q.V A Brass Pro Industrial 1/4 DOT Q.V A SAE J844 DOT 1/4 A 1/4 DOT Q.V A Brass Pro Industrial 3/8 DOT Q.V A SAE J844 DOT 3/8 A 3/8 DOT Q.V A Brass Pro Industrial 1/2 DOT Q.V A SAE J844 DOT 1/2 A 1/2 DOT Q.V A DOT CHINAUST 6MM OD A DOT CHINAUST 8MM OD A DOT CHINAUST 10MM OD A DOT CHINAUST 12MM OD A DOT CHINAUST 6MM OD DOT CHINAUST 8MM OD A DOT CHINAUST 10MM OD A DOT CHINAUST 12MM OD A DOT CHINAUST 6.4 MM OD DOT CHINAUST 6.4 MM OD A DOT CHINAUST 9.5 MM OD A DOT CHINAUST 9.5 MM OD A DOT CHINAUST 12.7 MM OD A DOT CHINAUST 12.7 MM OD A DOT CHINAUST 15.9 MM OD DOT CHINAUST 15.9 MM OD A Zhuji Changrong Machinery Co., Ltd Zhuji Xinhao Auto Parts Co.,Ltd CHANGRONG (ZHUJI CITY CHANGRONG MACHINERY LOGO) DOT OD1/2 AIR BRAKE AIR BRAKE HOSE SAE J844 TYPE B ½ O.D. DOT AXL 15 CR 1/2OD DOT AXL 15 A DOT 12

Compliance List of Automotive Safety Devices

Compliance List of Automotive Safety Devices December 8, 2017 Compliance List of Automotive Safety Devices Hydraulic, Air and Plastic Brake Hose and End Fittings For Three-Year Period 2014-2017 December 8, 2017 Update Automotive Manufacturers Equipment

More information

Compliance List of Automotive Safety Devices

Compliance List of Automotive Safety Devices April 20, 2018 Compliance List of Automotive Safety Devices Hydraulic, Air and Plastic Brake Hose and End Fittings For Three-Year Period 2015-2018 April 20, 2018 Update Automotive Manufacturers Equipment

More information

Compliance List of Automotive Safety Devices

Compliance List of Automotive Safety Devices March 1, 2019 Compliance List of Automotive Safety Devices Hydraulic, Air and Plastic Brake Hose and End Fittings For Three-Year Period 2016-2019 March 1, 2019 Update Automotive Manufacturers Equipment

More information

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period October 20, 2017 Update

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period October 20, 2017 Update October 20, 2017 AMECA List of Automotive Safety Devices Photometric Only Lighting Devices For Three-Year Period 2014-2017 October 20, 2017 Update Automotive Manufacturers Equipment AMECA Agency, Inc.

More information

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period April 20, 2018 Update

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period April 20, 2018 Update April 20, 2018 AMECA List of Automotive Safety Devices Photometric Only Lighting Devices For Three-Year Period 2015-2018 April 20, 2018 Update Automotive Manufacturers Equipment AMECA Agency, Inc. 1025

More information

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period December 14, 2018 Update

AMECA List of. Automotive Safety Devices. Photometric Only Lighting Devices. For Three-Year Period December 14, 2018 Update December 14, 2018 List of Automotive Safety Devices Photometric Only Lighting Devices For Three-Year Period 2015-2018 December 14, 2018 Update Automotive Manufacturers Equipment Agency, Inc. 1025 Connecticut

More information

> Vacuum Brake Standard automotive vacuum brake (NABT)...Nylon air brake tubing, color coded...105

> Vacuum Brake Standard automotive vacuum brake (NABT)...Nylon air brake tubing, color coded...105 BRAKE >, Compressor 3245E...Standard...101 3245G...Heavy duty...101 3245T...Low temperature...102 3658C (C5C)...Higher pressure, wire braid reinforced, use field-attachable couplings...102 3658E (C5E)...Higher

More information

Sumitomo Rubber Industries, Ltd., Receipt of Petition for. AGENCY: National Highway Traffic Safety Administration (NHTSA),

Sumitomo Rubber Industries, Ltd., Receipt of Petition for. AGENCY: National Highway Traffic Safety Administration (NHTSA), This document is scheduled to be published in the Federal Register on 09/22/2017 and available online at https://federalregister.gov/d/2017-20248, and on FDsys.gov DEPARTMENT OF TRANSPORTATION National

More information

Agency Information Collection Activities; Proposals, Submissions, and Approvals

Agency Information Collection Activities; Proposals, Submissions, and Approvals This document is scheduled to be published in the Federal Register on 08/22/2018 and available online at https://federalregister.gov/d/2018-18052, and on govinfo.gov DEPARTMENT OF TRANSPORTATION National

More information

2 PC FULL BORE BALL VALVE

2 PC FULL BORE BALL VALVE Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded

More information

Design Activity Report

Design Activity Report NEW Design Activity Report Castors, wheels and handling trolleys Wheels and castors Handling ball-units Handling trolleys Content Introduction... 2 Wheels and castors... 3 Handling ball-units... 4 Handling

More information

kysimple and Effective, The Tri-Clover Ball Valve

kysimple and Effective, The Tri-Clover Ball Valve . kysimple and Effective, The Tri-Clover Ball Valve 5308/5309 Series Ball Valves Concept Ball valves are ideal for applications requiring a full flow body design to minimize line turbulence and pressure

More information

Mining Seal Profiles

Mining Seal Profiles Mining Seals Mining Seal Profiles INTRODUCTION Ludowici Seals is a business unit of Ludowici Limited, an Australian owned Public Company, established in 1858. LP 301 LP 302 LP 303 The Seals division produces

More information

3 PC FULL BORE BALL VALVE

3 PC FULL BORE BALL VALVE Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation

More information

SHINHUNG POWER ACTUATED CYLINDER (Rev. 03)

SHINHUNG POWER ACTUATED CYLINDER (Rev. 03) SHINHUNG POWER ACTUATED CYLINDER (Rev 03) wwwshpaccom Growing with Customers THROUGH IMPROVEMENT & Innovation CONTENTS Global Major, SH PAC! 05 HISTORY 07 PRODUCTS 10 Production Equipment 11 Manufacturing

More information

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements

Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant

More information

Stafsjö s ATEX solutions for category 1 D (Zone 20)

Stafsjö s ATEX solutions for category 1 D (Zone 20) Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D

More information

Agency Information Collection Activity Under OMB Review. AGENCY: National Highway Traffic Safety Administration (NHTSA),

Agency Information Collection Activity Under OMB Review. AGENCY: National Highway Traffic Safety Administration (NHTSA), This document is scheduled to be published in the Federal Register on 08/20/2018 and available online at https://federalregister.gov/d/2018-17939, and on govinfo.gov DEPARTMENT OF TRANSPORTATION National

More information

REPORT NUMBER: 120-MGA

REPORT NUMBER: 120-MGA REPORT NUMBER: 120-MGA-2011-004 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 120 TIRE SELECTION AND RIMS FOR MOTOR VEHICLES WITH A GVWR OF MORE THAN 4,536 kg STARTRANS 2010 MFSAB NHTSA NO.: CA0900 PREPARED

More information

Glass Sanding Solution

Glass Sanding Solution Glass Sanding Solution About Mirka Mirka s Glass Sanding Solution KWH MIRKA LTD is a family-owned Finnish company and a world leader in abrasives technology innovation. We are offering a complete range

More information

HOW TO SEND E-INVOICES TO CARGOTEC

HOW TO SEND E-INVOICES TO CARGOTEC HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving

More information

Monoblock Directional Control Valve RM 230

Monoblock Directional Control Valve RM 230 Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).

More information

Ontario s Electrical Product Approval Requirements

Ontario s Electrical Product Approval Requirements Ontario s Electrical Product Approval Requirements Before an electrical product or piece of electrical equipment is used, sold, displayed or advertised for sale in Ontario, it must be approved by an accredited

More information

Non-Settling Defendants in Automotive Parts Indirect Antitrust Settlements:

Non-Settling Defendants in Automotive Parts Indirect Antitrust Settlements: Non-Settling Defendants in Automotive Parts Indirect Antitrust Settlements: Aisan Corporation of America In re: Fuel Injection Systems - 13-cv-02203 Aisan Industry Co., Ltd. In re: Fuel Injection Systems

More information

kyfor Smooth Operation of Your HTST System

kyfor Smooth Operation of Your HTST System . kyfor Smooth Operation of Your HTST System 762 Flo-Diversion Valves Application Alfa Laval s ruggedly designed Reverse-Acting and standard upright 762 Flo-Diversion Valves are perfect for use with HTST

More information

No July, Char-Lynn. Power Steering. Parts Information. 110, 230, and 450 Series Steering Contol Units

No July, Char-Lynn. Power Steering. Parts Information. 110, 230, and 450 Series Steering Contol Units Char-Lynn No. 6-321 July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring (6)

More information

9GV612G01 6x6x28 mm 12 V GV type Expected Life: 40,000 h (L10:Survival rate: 90% at 60 C, Tach output G speed : + red - black Sensor yellow Storage Temperature: -20 C to +70 C (Non-condensing) 9GV612G01

More information

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9

Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9 Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an

More information

Selector Valve RV 713

Selector Valve RV 713 Selector Valve RV 713 Key valve features RV 713 is a 3 way selector valve designed for flows up to 42gpm (160 Lpm) and max. operating pressures up to 3,625 psi (250 bar). Spools, both 2 and 3 position,

More information

GENERAL TESTING LABORATORIES, INC LEEDSTOWN ROAD COLONIAL BEACH, VIRGINIA 22443

GENERAL TESTING LABORATORIES, INC LEEDSTOWN ROAD COLONIAL BEACH, VIRGINIA 22443 REPORT NUMBER 202a-GTL-10-004 SAFETY COMPLIANCE TESTING FOR S HEAD RESTRAINTS STATIC REQUIREMENTS VOLVO CAR CORPORATION 2010 VOLVO S40, PASSENGER CAR NHTSA NO. CA5900 GENERAL TESTING LABORATORIES, INC.

More information

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles

Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles API PUBLICATION 1560 EIGHTH EDITION, 2012 SPECIAL NOTES 1. API PUBLICATIONS NECESSARILY ADDRESS PROBLEMS

More information

BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural

BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural 1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:

More information

REPORT NUMBER: 120-MGA

REPORT NUMBER: 120-MGA REPORT NUMBER: 120-MGA-2011-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 120 TIRE SELECTION AND RIMS FOR MOTOR VEHICLES WITH A GVWR OF MORE THAN 4,536 kg FOREST RIVER, INC. / STARCRAFT DIVISION 2011 STARCRAFT

More information

WGI. General Purpose Pressure Gauges Painted Steel Case Copper Alloy Internals Classic Series Model WJ04/06

WGI. General Purpose Pressure Gauges Painted Steel Case Copper Alloy Internals Classic Series Model WJ04/06 WGI Pressure Gauges General Purpose Pressure Gauges Painted Steel Case Copper Alloy Internals Classic Series Model WJ4/6 1½ Dial Application WGI Classic series pressure gauges are for general service applications

More information

kyone Valve for All Solutions

kyone Valve for All Solutions . kyone Valve for All Solutions Alfa Laval Unique Mixproof CP-3 Concept The Alfa Laval Unique Mixproof CP-3 is designed with user flexibility in mind. Configurable for applications in all sanitary industries

More information

DEPARTMENT OF TRANSPORTATION

DEPARTMENT OF TRANSPORTATION This document is scheduled to be published in the Federal Register on 12/19/2017 and available online at https://federalregister.gov/d/2017-27315, and on FDsys.gov DEPARTMENT OF TRANSPORTATION [4910-EX-P]

More information

SUMMARY: On July 8, 2016, the Department of Commerce (the Department) published its

SUMMARY: On July 8, 2016, the Department of Commerce (the Department) published its DEPARTMENT OF COMMERCE International Trade Administration A-570-016 This document is scheduled to be published in the Federal Register on 08/22/2016 and available online at http://federalregister.gov/a/2016-20023,

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000HM This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) G1, G2, M3K, M4K, M5K,

More information

DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ] Notice of Buy America Waiver

DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ] Notice of Buy America Waiver This document is scheduled to be published in the Federal Register on 03/10/2016 and available online at http://federalregister.gov/a/2016-05371, and on FDsys.gov DEPARTMENT OF TRANSPORTATION National

More information

SAFETY COMPLIANCE TESTING FOR FMVSS 110 TIRE SELECTION AND RIMS

SAFETY COMPLIANCE TESTING FOR FMVSS 110 TIRE SELECTION AND RIMS REPORT NUMBER 110-STF-10-004 SAFETY COMPLIANCE TESTING FOR FMVSS 110 TIRE SELECTION AND RIMS MAZDA MOTOR CORPORATION 2010 MAZDA 6 FOUR-DOOR PASSENGER CAR NHTSA NO. CA5402 U.S. DOT SAN ANGELO TEST FACILITY

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 4029.2:2000 AS/NZS 4029.2 Australian/New Zealand Standard Stationary batteries Lead-acid Part 2: Valve-regulated type (IEC 60896-2:1995, MOD) AS/NZS 4029.2:2000 This Joint Australian/New Zealand

More information

*** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles

*** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles *** DRAFT *** Lubricant Service Designations for Automotive Manual Transmissions, Manual Transaxles, and Axles API PUBLICATION 1560 EIGHTH EDITION, 2011 American Petroleum Institute 1220 L Street, Northwest

More information

SAFETY COMPLIANCE TESTING FOR FMVSS 110 TIRE SELECTION AND RIMS

SAFETY COMPLIANCE TESTING FOR FMVSS 110 TIRE SELECTION AND RIMS REPORT NUMBER 110-STF-09-001 SAFETY COMPLIANCE TESTING FOR TIRE SELECTION AND RIMS GENERAL MOTORS CORPORATION 2009 CHEVROLET IMPALA FOUR-DOOR PASSENGER CAR NHTSA NO. C90100 U.S. DOT SAN ANGELO TEST FACILITY

More information

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE REPORT NUMBER 401-STF-09-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE GENERAL MOTORS CORPORATION 2009 CHEVROLET IMPALA FOUR-DOOR PASSENGER CAR NHTSA NO. C90100 U.S. DOT SAN ANGELO

More information

1. General company data

1. General company data Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:

More information

REPORT NUMBER: 111SB-MGA SAFETY COMPLIANCE TESTING FOR FMVSS NO. 111SB SCHOOL BUS REARVIEW MIRRORS

REPORT NUMBER: 111SB-MGA SAFETY COMPLIANCE TESTING FOR FMVSS NO. 111SB SCHOOL BUS REARVIEW MIRRORS REPORT NUMBER: 111SB-MGA-2011-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 111SB SCHOOL BUS REARVIEW MIRRORS 2011 STARCRAFT QUEST SCHOOL BUS NHTSA NO.: CB0902 PREPARED BY: MGA RESEARCH CORPORATION 5000

More information

10 Series Exercise Bike

10 Series Exercise Bike 10 Series Exercise Bike Nautilus Bowflex Schwinn Fitness StairMaster Universal Nautilus Institute 001-7213-112008B Table of Contents Product Specifications...2 Safety Warnings...3 Exploded Drawing...4

More information

Pressure Switches Low Pressure Switch

Pressure Switches Low Pressure Switch Low Pressure Switch Measuring critical system parameters is essential Reliable and continuous control of the filter in all applications The Low Pressure range of filter condition indicators are designed

More information

Seamless Stainless Instrumentation Tubing

Seamless Stainless Instrumentation Tubing Seamless Stainless Instrumentation Tubing Headline About MST Our Profile Mannesmann Stainless Tubes has one of the largest product portfolios in this sector and 125 years of history that dates back to

More information

COVER PAGE FOR TEST REPORT

COVER PAGE FOR TEST REPORT Issue Date: 2007-05-22 Page 1 of 2 Report Reference # E116994-A35-CB-1 Amendment 1 2008-04-24 COVER PAGE FOR TEST REPORT Test Item Description: DC Power Supplies Model/Type Reference: Class I Models: GNT2XXX-YYY

More information

Continental Tire the Americas, LLC, Grant of Petition for. AGENCY: National Highway Traffic Safety Administration (NHTSA),

Continental Tire the Americas, LLC, Grant of Petition for. AGENCY: National Highway Traffic Safety Administration (NHTSA), This document is scheduled to be published in the Federal Register on 07/30/2018 and available online at https://federalregister.gov/d/2018-16153, and on govinfo.gov DEPARTMENT OF TRANSPORTATION National

More information

Normally Open Miniature Proportional Valve Thermally Compensated Proportional Valve

Normally Open Miniature Proportional Valve Thermally Compensated Proportional Valve Lone Wolf Typical Applications Blood Pressure Monitoring Vitreo Retinal Surgery Normally Open Miniature Proportional Valve Thermally Compensated Proportional Valve The Lone Wolf miniature proportional

More information

V4 Cordless Lamp System User Guide

V4 Cordless Lamp System User Guide V4 Cordless Lamp System User Guide Contents Welcome Important Notes Components + Connection Diagram Charging Status Indicator Charging the Battery Lamp Control + Operating Modes Turning Function Operating

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia

More information

Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings

Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face

More information

DOUBLE OCTOMILL TM PRODUCT RANGE

DOUBLE OCTOMILL TM PRODUCT RANGE DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch

More information

Single-acting pneumatic cylinder type ECS

Single-acting pneumatic cylinder type ECS Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder

More information

PARTS/CROSS-REFERENCE INFORMATION

PARTS/CROSS-REFERENCE INFORMATION PARTS/CROSS-REFERENCE INFORMATION AA1 and S-ABA Brake Adjusters Innovative Vehicle Solutions Important Notice The products described within this literature, including without limitation, product features,

More information

Amendment 69 FR (20 December 2004) Section 5 Hydraulic brake hose, brake hose assemblies, and brake hose end fittings ESN270529

Amendment 69 FR (20 December 2004) Section 5 Hydraulic brake hose, brake hose assemblies, and brake hose end fittings ESN270529 Vehicle Certification Agency 1 The Eastgate Office Centre Eastgate Road Bristol BS5 6XX United Kingdom Telephone: +44 (0) 117 951 5151 Fax: +44 (0) 117 952 4103 Email: enquiries@vca.gov.uk www.dft.gov.uk/vca/

More information

HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE

HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE About the company Customer oriented supplier HEBEI QIANLI RUBBER PRODUCTS CO., LTD. is a technical company, which focus on researching,

More information

Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society

Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection

More information

REPORT NUMBER: 305-MGA

REPORT NUMBER: 305-MGA REPORT NUMBER: 305-MGA-2011-001 SAFETY COMPLIANCE TESTING FOR FMVSS 305 Electric Powered Vehicles: Electrolyte Spillage and Electrical Shock Protection HONDA MOTOR CO., LTD 2011 HONDA CR-Z 3-DR HATCHBACK

More information

Scientific diffraction gratings / Custom gratings. Transmission gratings for high energy lasers

Scientific diffraction gratings / Custom gratings. Transmission gratings for high energy lasers Scientific diffraction gratings / Custom gratings Transmission gratings for high energy lasers Commitment to quality HORIBA Jobin Yvon offers complete customer service, including expert technical advice

More information

Requirements for IC Engine Coolant Hoses

Requirements for IC Engine Coolant Hoses AUTOMOTIVE INDUSTRY STANDARD Requirements for IC Engine Coolant Hoses PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B.NO.832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE

More information

Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover

Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H

More information

PVG Open Loop Pumps. Bulletin G

PVG Open Loop Pumps. Bulletin G PVG Open Loop Pumps Bulletin 4709-G Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Shaft Torque Ratings 7 Pressure Pick-ups 7 Table of Contents Controls 8-9 Performance

More information

Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003

Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 Rotary Plug Valves (PR Series) Catalog 4126-PR Revised, July 2003 PR Series Rotary Plug Valves Introduction Parker PR Series Plug Valves provide positive leak tight shut-off, high flow capacity, and quick

More information

General Valve Assembly Information

General Valve Assembly Information General Assembly Information Open-Center Directional Control Valves General Valve Assembly Information The Basics Every valve has the following elements: Inlet Main relief Work sections Outlet Section

More information

FLEET REDUCTION SALE!

FLEET REDUCTION SALE! FLEET REDUCTION SALE! WHOLESALE PRICING ON GENERATORS, AIR COMPRESSORS, ANCILLARY EQUIPMENT A ARCTIC ENCLOSURES DIESEL GENERATORS Prudhoe Bay, AK XQ60 60 E212222 7,288 $12,100 $10,500 2012 NPS80 80 E790

More information

Vehicle Online Services

Vehicle Online Services Consultation Document Vehicle Online Services Response from: British Vehicle Rental and Leasing Association River Lodge Badminton Court Amersham BUCKS HP7 0DD Tel: +44 1494 434747 Fax: +44 1494 434499

More information

Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 11

Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 11 Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2013-01-16 issue 11 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional

More information

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 110 TIRE SELECTION AND RIMS

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 110 TIRE SELECTION AND RIMS REPORT NUMBER 110-STF-11-001 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 110 TIRE SELECTION AND RIMS FORD MOTOR COMPANY 2011 FORD FIESTA FOUR-DOOR PASSENGER CAR NHTSA NO. CB0200 U.S. DOT SAN ANGELO TEST FACILITY

More information

HEBEI QIANLI RUBBER PRODUCTS CO., LTD. AIR HOSE. Air hose for air tools or compressor equipment. Technical Data

HEBEI QIANLI RUBBER PRODUCTS CO., LTD. AIR HOSE. Air hose for air tools or compressor equipment. Technical Data AIR HOSE Air hose for air tools or compressor equipment Technical Data Company Profile is a technical company, which focus on researching, developing, manufacturing and exporting rubber hose and related

More information

BUSINESS AND CONSUMER SURVEY RESULTS. Euro Area (EA) February 2014: Economic Sentiment broadly unchanged in the euro area and the EU

BUSINESS AND CONSUMER SURVEY RESULTS. Euro Area (EA) February 2014: Economic Sentiment broadly unchanged in the euro area and the EU February 2014 BUSINESS AND CONSUMER SURVEY RESULTS 120 Graph 1: Economic sentiment indicator (s.a.) 110 100 90 80 Euro Area (EA) 70 60 long-term av erage (1990-2013) = 100 European Union (EU) 1990 1991

More information

IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA

IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA IFTA LAW ENFORCEMENT COMMITTEE BEST PRACTICES GUIDE OCTOBER 2016 IFTA Disclaimer This document was prepared by members of the. It has been reviewed and approved by the IFTA Board. This document should

More information

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 3

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 3 Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2012-11-27 issue 3 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore

More information

SilentFlo Hydraulic Power Units. Quiet, reliable and efficient power generation. be certain.

SilentFlo Hydraulic Power Units. Quiet, reliable and efficient power generation. be certain. l SilentFlo Hydraulic Power Units Quiet, reliable and efficient power generation be certain. Reliable power from a proven source. Trust one of the world s leading providers of servohydraulic test systems

More information

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 202 HEAD RESTRAINTS STATIC REQUIREMENTS

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 202 HEAD RESTRAINTS STATIC REQUIREMENTS REPORT NUMBER 202-GTL-08-005 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 202 HEAD RESTRAINTS STATIC REQUIREMENTS KIA MOTORS CORPORATION 2008 KIA SPORTAGE, MPV NHTSA NO. C80506 GENERAL TESTING LABORATORIES,

More information

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE

SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE REPORT NUMBER 401-STF-09-002 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 401 INTERIOR TRUNK RELEASE HYUNDAI MOTOR COMPANY 2009 HYUNDAI GENESIS FOUR-DOOR PASSENGER CAR NHTSA NO. C90501 U.S. DOT SAN ANGELO TEST

More information

DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. Petition for Exemption from the

DEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. Petition for Exemption from the This document is scheduled to be published in the Federal Register on 02/19/2016 and available online at http://federalregister.gov/a/2016-03443, and on FDsys.gov DEPARTMENT OF TRANSPORTATION National

More information

DEPARTMENT OF TRANSPORTATION. Parts and Accessories Necessary for Safe Operation; Stoneridge, Inc. Application for an Exemption

DEPARTMENT OF TRANSPORTATION. Parts and Accessories Necessary for Safe Operation; Stoneridge, Inc. Application for an Exemption This document is scheduled to be published in the Federal Register on 04/05/2018 and available online at https://federalregister.gov/d/2018-06964, and on FDsys.gov DEPARTMENT OF TRANSPORTATION [4910-EX-P]

More information

SECTION 1 - APPLICANT INFORMATION. 1) Legal Name: 2) Mailing Address: 3) Physical Address (if different from mailing address):

SECTION 1 - APPLICANT INFORMATION. 1) Legal Name: 2) Mailing Address: 3) Physical Address (if different from mailing address): 150 CSR 27 FORM 1 Application for CRTS Permit (PSC Use Only) January1, through December 31, PSC Permit No.: ProcessedBy: SECTION 1 - APPLICANT INFORMATION 1) Legal Name: 2) Mailing Address: 3) Physical

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION www.turboaku.com /turboaku TECHNICAL INFORMATION LAYOUT MONTAJ ŞEKLİ 0 1 Length Length 3 4 Length Length 18 TERMINAL KUTUP BAŞI Terminal A (Standart B (Small) Stud Positive 3/8-16 Thread Negative 3/8-16

More information

BRASS FITTINGS and Related Products

BRASS FITTINGS and Related Products Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake

More information

Guide Ball Bushing NEW

Guide Ball Bushing NEW NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available

More information

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5

Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5 Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore

More information

Electronic On-Board Recorders and Hours of Service Supporting Documents. AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT.

Electronic On-Board Recorders and Hours of Service Supporting Documents. AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. This document is scheduled to be published in the Federal Register on 04/02/2012 and available online at http://federalregister.gov/a/2012-07899, and on FDsys.gov DEPARTMENT OF TRANSPORTATION 4910-EX-P

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION TS96 AR ISSUE 5 Issued 2014-05 Amendment Record NOTE: The issue status of this document remains unchanged as there have been no changes to the technical content. SAE INDUSTRY TECHNOLOGIES

More information

Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12

Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12 Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional

More information

Installation and Maintenance of V-BELT DRIVES

Installation and Maintenance of V-BELT DRIVES Mechanical VBD-IM Installation and Maintenance of V-BELT DRIVES Powering Your Success Quality Products and the Support to Back Them Up Wood s V-Belt sheaves of close grain, high-tensile cast iron are machined

More information

*AUTO DEALER LICENSING REQUIREMENTS ALL 50 STATES*

*AUTO DEALER LICENSING REQUIREMENTS ALL 50 STATES* *AUTO DEALER LICENSING REQUIREMENTS ALL 50 STATES* ALABAMA DEALER LICENSE REQUIREMENTS Website: http://www.revenue.alabama.gov/licenses/mvdrl.html Ph: 334-242-9612 Per category: $10.00 Privilege License:

More information

REPORT NUMBER: 131SB-MGA SAFETY COMPLIANCE TESTING FOR FMVSS NO. 131SB SCHOOL BUS PEDESTRIAN SAFETY DEVICES

REPORT NUMBER: 131SB-MGA SAFETY COMPLIANCE TESTING FOR FMVSS NO. 131SB SCHOOL BUS PEDESTRIAN SAFETY DEVICES REPORT NUMBER: 131SB-MGA-2011-002 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 131SB SCHOOL BUS PEDESTRIAN SAFETY DEVICES 2011 GIRARDIN MICRO BIRD SCHOOL BUS NHTSA NO.: CB0903 PREPARED BY: MGA RESEARCH CORPORATION

More information

ARTICLE BEGINNING INTRODUCTION TO MOTORIST ASSURANCE PROGRAM (MAP)

ARTICLE BEGINNING INTRODUCTION TO MOTORIST ASSURANCE PROGRAM (MAP) Article Text ARTICLE BEGINNING GENERAL INFORMATION Anti-Lock Brake System (ABS) Motorist Assurance Program Standards For Automotive Repair All Makes and Models INTRODUCTION TO MOTORIST ASSURANCE PROGRAM

More information

Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11

Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11 Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable

More information

MSM 610 Week 2. Ed Kuligowski Monday, July 2nd, MSM 610 Week 2 Journal. Edward M Kuligowski. Bellevue University

MSM 610 Week 2. Ed Kuligowski Monday, July 2nd, MSM 610 Week 2 Journal. Edward M Kuligowski. Bellevue University 1 MSM 610 Week 2 Ed Kuligowski Monday, July 2nd, 2012 MSM 610 Week 2 Journal Edward M Kuligowski Bellevue University Currently the organization I work for (Takata) can contribute its success in becoming

More information

Section 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock

Section 2. Pipe, Valves and Fittings Sizes ¼ to 12 Schedule 80 CPVC Piping System. Serviced by GF Little Rock Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread

More information

Recharge Kick-off Meeting Recharge Activity Review Process for

Recharge Kick-off Meeting Recharge Activity Review Process for Recharge Kick-off Meeting Debra Fry Executive Director, Operating Budget and Recharge Review Gabriella Hato Manager, Recharge Review Sarah Hislen Analyst, Recharge Review Charet Wynn Analyst, Recharge

More information

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)

Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended

More information

MWA /MWB Roundline Cylinders

MWA /MWB Roundline Cylinders MWA /MWB For working pressures up to and bar Catalogue HY7-/UK June Catalogue HY7-/UK Introduction Standard MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial

More information