Brass chrome plated ball valve with lever, full bore. XPress press end x Tectite push end for copper/carbon steel/stainless steel tube

Transcription

1 Brass chrome plated ball valve with lever, full bore. XPress press end x Tectite push end for copper/carbon steel/stainless steel tube XT500 Ball valve Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode Price ( ) ex VAT test 15mm XT mm XT mm XT mm XT mm XT mm XT XT500 Ball valve Code Description A B Kg DN15/15mm XT DN20/22mm XT DN25/28mm XT DN32/35mm XT DN40/42mm XT DN50/54mm XT Pegler Yorkshire reserve the right to change specifications Size Pattern No. Code Kv m3/h 15mm XT mm XT mm XT mm XT mm XT mm XT Pegler Yorkshire reserve the right to change specifications Regulations THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law. Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1 ) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV. Size Pattern No. Code PED Categorisation 15mm XT SEP 22mm XT SEP 28mm XT SEP 35mm XT SEP 42mm XT SEP 54mm XT SEP

2 Pegler Yorkshire reserve the right to change specifications Component Material Body Forged brass, chrome plated (1/4" to 2") Gravity die cast brass, chrome plated (2.1/2" to 4") End piece Forged brass, chrome plated (1\4" to 2") Gravity die cast brass, chrome plated (2.1/2" to 4") Ball Brass bar, chrome plated (1/4" to 1/2") Forged brass, chrome plated (3/4" to 2") Gravity die cast brass, chrome plated (2.1/2" to 4") Stem Seats Thrust washer Stem 'O' ring Lever handle Nut (self locking) Tee handle Security screws Sleeve Ext Stem Fixing screw Washer Brass bar PTFE (Teflon) PTFE (Teflon) Viton High temperature PVC insulated zinc plated steel Zinc plated steel Aluminium, painted Nickel plated brass Brass (EL) Brass (EL) Steel (EL) Brass (EL) Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Telephone: Phone +44 (0) Fax: +44 (0) Website: Registered office : Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no :

3

4

5

6 WRc-NSF TEST CERTIFICATE PEGLER The YORKSHIRE GROUP LTD RANGE OF PUSH H-FIT ADAPTORS HAS SUCCESSFULLY COMPLETED MECHANICAL TESTINGG AGAINST THE REGULATORS SPECIFICATION FOR WATER FITTINGS AND THEREFORE MEETS THE MECHANICAL REQUIREMENTS OF THE WATER SUPPLY (WATER FITTINGS) REGULATIONS 1999 INN ENGLAND AND WALES, THE WATER BYELAWS 2004 IN SCOTLANDD AND THE WATER SUPPLY (WATER FITTINGS) REGULATIONS (NORTHERN IRELAND) The following models are covered by this test certificate Tectite range of push-fit adaptors for adapting Pegler Yorkshire valves to tubes compatible with the Tectite Pro range of fittings. Sizes: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm and 54mmm... Signed Date: 20 th April 2011 Certificate number: WRc-NSF Ltd, 30 Fern Close, Pen-y-fan Industriall Estate, Oakdale, Gwent, NP11 3EH, UK. Telephone: +44 (0) Website: This test certificate relates to the successful s completion of testing of the range of products detaiiled above against the requirements of the Regulators Specification for water fittings and does not constitute approval or endorsement of the above items by WRc-NSF or any of o its associatedd organisations. WRc-NSF Ltd

7 WRc-NSF TEST CERTIFICATE PEGLER The YORKSHIRE GROUP LTD RANGE OF PRESS-FIT ADAPTORS HAS SUCCESSFULLY COMPLETED MECHANICAL TESTINGG AGAINST THE REGULATORS SPECIFICATION FOR WATER FITTINGS AND THEREFORE MEETS THE MECHANICAL REQUIREMENTS OF THE WATER SUPPLY (WATER FITTINGS) REGULATIONS 1999 INN ENGLAND AND WALES, THE WATER BYELAWS 2004 IN SCOTLANDD AND THE WATER SUPPLY (WATER FITTINGS) REGULATIONS (NORTHERN IRELAND) The following models are covered by this test certificate Xpress range of press-fit adapting Pegler Yorkshire valves too tubes compatible with the t Xpress range of fittings Sizes: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm and 54mmm... Signed Date: 20 th April 2011 Certificate number: WRc-NSF Ltd, 30 Fern Close, Pen-y-fan Industriall Estate, Oakdale, Gwent, NP11 3EH, UK. Telephone: +44 (0) Website: This test certificate relates to the successful s completion of testing of the range of products detaiiled above against the requirements of the Regulators Specification for water fittings and does not constitute approval or endorsement of the above items by WRc-NSF or any of o its associatedd organisations. WRc-NSF Ltd