Rompetrol Well Services. New Technologies and Equipment for Well Services

Transcription

1 New Technologies and Equipment for Well Services

2 Contents New Technologies and Equipment for Cementing Services New Equipment for Acidizing Services New Equipment for Nitrogen Services New Equipment for Sand Control Services

3 Servicing the Oil and Gas industry since 1951 Rompetrol Well Services provides specialized services for the drilling and production of oil and gas wells. Services include: Primary and Secondary Cementing Acidizing and Fracturing Sand Control Nitrogen Services Well Completion Well Testing Services Casing Running Drilling and Fishing Tools Rental RWS oversees all ongoing projects from its main office in Ploieşti, Romania, offering technical support for 15 locations in Romania and abroad.

4 Equipment Upgrade Program Rompetrol Well Services started its Technology and Equipment upgrade program in the year The motto of this program is constantly learn and develop Year 2000 Year 2005 Year 2009 Forecast % 15% 2% 20% 34% 49% 98% 83% 17% 25% 55% Equipment age less than 5 years btw. 5 and 10 years more than 10 years

5 New Technologies and Equipment for Cementing Services TMTP Twin Pump Power: Nominal discharge: Maximum Pressure: Controls: 600 HP BPM 15,000 PSI Electromagnetic densito- meter for SGU output 2x turbine type flow rate meter Pressure Chemical controls Extra equipment: Centrifugal pumps Mix tanks Recirculating Mixer: Process measurement and data acquisition ServaHEMY High Energy Mixing Injector

6 TMTP Twin Pump Main performances vs. a Conventional Unit Hydraulic Power Nominal Discharge + 84% + 30% 6

7 TMTP Twin Pump Advantages Hydraulic power supplied is almost two times higher than an classical Cementing Unit The unit is equipped with a comprehensive parameters recording system for all mixing and pumping services performed Reduced number of operators Reduced footprint

8 Recirculation + Batch Mixing Combination of recirculation mixer and twin compartment batch mixers to mix and recirculate cement slurry and deliver it to the pumping unit. The cement slurry is maintained as a homogeneous and consistent blend. The mixers are capable of transferring fluid from remote sources whilst simultaneously recirculating Mix water Dry Cement

9 New Equipment for Acidizing Services CMAP 800 Acidizing Unit Truck mounted integrated acid tank, acid mixing and pumping system special designed for conventional acidization and acid fracturing Power: 600 HP Nominal discharge: 2,112 l/min Maximum Pressure: 10,000 PSI Controls: Electromagnetic flow rate meter Extra equipment: Fluid volumes measurement Chemical controls Centrifugal pumps Process measurement and data acquisition

10 CMAP 800 Acidizing Unit Main performances vs. a Conventional Unit Hydraulic Power Nominal Discharge + 62% + 20%

11 CMAP 800 Acidizing Unit Advantages The CMAP 800 unit provides hydraulic power for nearly two times greater than that provided by a ACF 700 type unit The unit is equipped with tanks for acid solutions totaling capabilities of two equipment: pumping unit and road tanker Acid tank located in the equipment can replace the acid pit provided by the customer at the well-site Reduced footprint

12 New Equipment for Nitrogen Services 180 K Non-fired Nitrogen Converter Power: Nominal discharge: Maximum Pressure: Controls: Extra equipment: 550 HP 180,000 SCFH 10,000 PSI Electromagnetic flow rate meter Fluid volumes measurement Pressure & Temperatures CryoQuip - VWP 180K Vaporiser Process measurement and data acquisition

13 180 K Non-fired Nitrogen Converter Main performances vs. a Conventional Unit Power Nominal Discharge + 140% + 100%

14 180 K Non-fired Nitrogen Converter Advantages 180K Converter produces a flow of nitrogen double the converters currently used, thus replacing two conventional units Equipment records on the chart all operation s parameters including pressure, flow and nitrogen volume pumped Reduced number of operators Reduced footprint

15 New Equipment for Sand Control Services FBU 35 Sand Blender Fluid Rate: Max. discharge press Max. discharge density Dry chemical rate Liquid chemical rate Proppant input Extra equipment: 5m 3 /min 5atm 1600kgA/m3 sand added per gallon of water m 3 /min 100 l/min 4000 Kg/min Centrifugal Pumps Process measurement and data acquisition

16 FBU 35 Sand Blender Advantages The Blender s advanced unit control systems enhance slurry quality and operator performance by automatic tub leveling Equipment records on the chart all operation s parameters including pressure, flow and density Reduced footprint

17 Thank you for your attention!