FLEXTECH PACKAGING, LTD

Size: px

Start display at page:

Download "FLEXTECH PACKAGING, LTD"

Leslie Harris
6 years ago
Views:

PUBLIC AUCTION SALE PUBLIC AUCTION SALE ONSITE AND WEBCAST MULTI-LAYER BLOWN FILM PLANT 2002 ALPINE 80 7 LAYER LINE 1998 ALPINE 80 5 LAYER LINE 2005 RULLI STANDARD 1800MM 5 LAYER LINE SLITTER

1 PUBLIC AUCTION SALE PUBLIC AUCTION SALE ONSITE AND WEBCAST MULTI-LAYER BLOWN FILM PLANT 2002 ALPINE 80 7 LAYER LINE 1998 ALPINE 80 5 LAYER LINE 2005 RULLI STANDARD 1800MM 5 LAYER LINE SLITTER PELLETIZERS CHILLERS LABORATORY PELLET AND PLANT EQUIPMENT FLEXTECH PACKAGING, LTD INDUSTRIAL BLVD. CINCINNATI, OHIO Wed.Ê OctÊ 19thÊ atê 10:30Ê am Inspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orê byê appt 2002 Directions to Plant: Plant is located 30 miles North of Cincinnati Airport. From Airport take Rte I-275 East 3.5 Miles to Rte I-75 North 24 Miles To Rte I-275 East 1 Mile. Take 1st Exit #44, Mosteller Rd. Right 1 Mile to Left on Crescentville Rd.,.8 Mile to Right onto International Blvd. 2nd Road on Left ALPINE 80 7 LAYER EXTRUSION LINE 1998 On-Site Terms: 25% deposit cash, ctfd ck or bank letter honoring payment w/ unctfd cks. 13% Buyer s Premium onsite. Other terms at sale. Webcast Terms: ALL on-line bidders MUST provide a 25% deposit up front with auctioneer s office by Tuesday October 18th at Noon to be approved to bid. A 16% Buyer s Premium will apply Proxy Bid: Auctioneer will accept proxy bids for those unable to attend this sale. Bids must be accompanied by a deposit of 25% of bid in certified check or bank letter honoring payment with uncertified checks. Important Notice: All items sold at this sale are sold without warranty or representation whatsoever, INCLUDING WITHOUT LIMITATION, any warranty or representation as to description, title or capacity. All items are sold as is where is, auctioneer expressly disclaims the implied warranties or merchantability and fitness for a particular purpose. To arrange inspection contact auctioneers office Register to bid: ALPINE 80 5 LAYER EXTRUSION LINE

TRIM RECLAIM (2) 2005 MACCHI Recotrim OP1610-1 Trim Reclaim Twin Screw Extrusion Pelletizers w/dryers, s/n 05059, 05035, 90#/Hour FOREMOST

5 HP Vacuum Pump, Filter, Control Panel CH 5KTA 60 Treater, 2 Side, Generator (New) AMPLAS 48 Driven Unwind w/edge Guide Unit 2006 CORE

DRAFT Blowers, Filters, BLOAPCO Blower, FIFE Edge Guides, PILLAR 64 Treater Box PUBLIC AUCTION SALE SLITTER 1999 DUSENBERY 835L-3 64 Cantilever

(2) Electric Hoists, ¼ & 1 Ton Hoists MSI Challenger 2 10,000# Digital Hanging Scale TILT LOCK LS1-3 Roll Lift, s/n 11596 SILOS (2) 1998 A.O. SMITH Welded Steel Silos, 14 x47, 5810 Cu.

JET Mill Drill, MILLER & LINCOLN Welders, Band Saws, Hyd.

PACKAGING surplus division, or an entire facility to 10095 INDUSTRIAL BLVD. liquidate, talk to us first.

Ê OctÊ 19thÊ accurate and confidential appraisals of StartingÊ atê 10:30Ê am your assets at Replacement, In-place, Fair Market, Orderly

2 TRIM RECLAIM (2) 2005 MACCHI Recotrim OP Trim Reclaim Twin Screw Extrusion Pelletizers w/dryers, s/n 05059, 05035, 90#/Hour FOREMOST HSFG HP Trim Grinder w/pull Rolls, s/n 39119; PROCESS CONTROL 15 HP Trim Grinder w/blower MISC. EQUIP. (3) CRG LOGICS 3500# Bins, 7.5 HP Vacuum Pump, Filter, Control Panel CH 5KTA 60 Treater, 2 Side, Generator (New) AMPLAS 48 Driven Unwind w/edge Guide Unit 2006 CORE TECHNOLOGIES 9190 Core Cutter, s/n 12312, 3 & 6 Special Built Core Cutter, 6 (2) FOREMOST 10 HP Vacuum Pumps, CONAIR 10 HP Vacuum Pump QUICK DRAFT Blowers, Filters, BLOAPCO Blower, FIFE Edge Guides, PILLAR 64 Treater Box PUBLIC AUCTION SALE SLITTER 1999 DUSENBERY 835L-3 64 Cantilever Duplex Slitter Rewinder, s/n 59556, AC Vector Drives, Guided Unwind, Amplas 4-Head Slit Sealer, Quick Draft Blower Overhead Roll Handling System, (2) Electric Hoists, ¼ & 1 Ton Hoists MSI Challenger 2 10,000# Digital Hanging Scale TILT LOCK LS1-3 Roll Lift, s/n SILOS (2) 1998 A.O. SMITH Welded Steel Silos, 14 x47, 5810 Cu. Ft., s/n 80067, RAILROAD CAR 4-Compartment, (2) 1138 Cu. Ft., (2) 1487 Cu. Ft., 196,000 ID IMT, 67,000 IT WT MAINT. EQUIP. JET Mill Drill, MILLER & LINCOLN Welders, Band Saws, Hyd. Press, Belt Grinders, Power & Hand Tools, Hardware, Supplies Auction & Appraisal Services If you have idle or surplus assets, a FLEXTECH PACKAGING surplus division, or an entire facility to INDUSTRIAL BLVD. liquidate, talk to us first. Our certified appraisal staff will answer these CINCINNATI, OHIO questions for you. We provide prompt, Wed.Ê OctÊ 19thÊ accurate and confidential appraisals of StartingÊ atê 10:30Ê am your assets at Replacement, In-place, Fair Market, Orderly Liquidation and/or inspection:ê Tues.Ê OctÊ 18,Ê 9-5Ê orê byê appt Auction Values Register to bid on-line DUSENBERY 835L-3 64 Slitter 1 of 2 MACCHI Recotrim Systems CORE TECH 9190 Core Cutter NEW JOSEPH FINN CO., INC. CH 5KTA 60 2 Side Treater 2 Steel Silos 4 Compartment Railroad Car CRG Logic Bins, Pump, Control

LABORATORY 2001 MOCON Ox-Tran 2/20 MJ Oxygen Permeability Tester, s/n 0101AG092 1998 MOCON Ox-Tran 2/620 MT Oxygen Permeability Tester, s/n 1297BN011 1998 MOCON Permatran 3/60 MN Water Vapor

47780, 47450 1998 MICROM HM310 Microtome, s/n 13089 1998 CARL ZEISS Axioskop 20 Microscope, s/n 123850 (2) DYNISCO/THELLER HT Heat Sealers, s/n 98237 (2000), 93156 (1998) 1998 IMS GELBO 5000ES Flex

3 LABORATORY 2001 MOCON Ox-Tran 2/20 MJ Oxygen Permeability Tester, s/n 0101AG MOCON Ox-Tran 2/620 MT Oxygen Permeability Tester, s/n 1297BN MOCON Permatran 3/60 MN Water Vapor Permeability Tester, s/n 1297BP THWING ALBERT EJA1750 Tensile Tester, s/n BYK GARDNER 4725 Haze Guard Plus Tester, s/n (2) 1998 THWING ALBERT Friction Peel Testers, s/n 47780, MICROM HM310 Microtome, s/n CARL ZEISS Axioskop 20 Microscope, s/n (2) DYNISCO/THELLER HT Heat Sealers, s/n (2000), (1998) 1998 IMS GELBO 5000ES Flex Tester, s/n DYNISCO/THELLER D Mini Tensile Tester; METTLER TOLEDO FP52HT Hot Stage; TECHNIDYNE BNL-3 Opacimeter; ELMENDORF 1600 Tear Tester; DYNISCO Drop Dart Tester; JDC Sample Cutters; Balance, Scales; BLUE M Oven; Lab Bath; BYK Micro Gloss; Micrometers; Lab Tables VIEW OF MOCON PERMEABILITY TESTERS CHILLERS 1999 AEC PINN-3-90RQ Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank, Pumps, Filter, s/n 31G0226 (Rebuilt) 1999 AEC PINN-3-90RG Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank, Pumps, Filter COMPRESSORS QUINCY QSF50ANA32B 50 HP Rotary Air Compressor, s/n QN ZEKS 250NCGA400 Air Dryer, s/n ; QUINCY 20 HP Tank-Mtd. Air Compressor, s/n 91870J, Quincy Q1FD Dryer; (2) Vertical Steel Air Tanks PLANT EQUIP. WULFTEC WIP150 Pallet Stretch Wrapper, s/n ; METTLER TOLEDO Panther 10,000# Floor Scale, 48 x 48 ; 360º Jib Crane, Hydraulic Pallet Jacks, Vacuums, Pallet Shelving, Ladders, Strap Trucks, Fans, Cabinets, Carts VIEW OF LABORATORY EQUIPMENT Auction & Appraisal Services If you have idle or surplus assets, a surplus division, or an entire facility to liquidate, talk to us first. Our certified appraisal staff will answer these questions for you. We provide prompt, accurate and confidential appraisals of your assets at Replacement, In-place, Fair Market, Orderly Liquidation and/or Auction Values 1 OF 2 AEC 90 TON CHILLERS T-A Tensile Tester WULFTEC Wrapper QUINCY 50 HP ROTARY AIR COMPRESSOR

2002 ALPINE 80 7 LAYER BLOWN FILM EXTRUSION LINE Custom Built 80 MDO will be

75mm, 30:1, Air Cooled Extruders, 125 HP DC Drives, (2) 65mm, 30:1, Air

HP DC Drives, All w/hydraulic Screen Changers, 400mm 7-LayerÊ AlpineÊIBC

Cage, Poly Cools & Blowers, Tower, 80 Oscillating Haul Off, Secondary Nip,

RheinholdÊ ASKII-200 80 Robotic Controlled Face-to-Face Center Surface

Extractors, (2) Trim Blowers, (7) Plast Control Gravimetric Blenders,

Orienter (MDO),Ê Siemens Control, (4) Web Paths, Budzar & Advantage

4 2002 ALPINE 80 7 LAYER BLOWN FILM EXTRUSION LINE Custom Built 80 MDO will be offered separately 2002 ALPINE 7-Layer, 80 Blown Film Extrusion Line, (2) 75mm, 30:1, Air Cooled Extruders, 125 HP DC Drives, (2) 65mm, 30:1, Air Cooled Extruders, 100 HP DC Drives, (3) 50mm, 30:1, Air Cooled Extruders, 60 HP DC Drives, All w/hydraulic Screen Changers, 400mm 7-LayerÊ AlpineÊIBC Die, Controls, Addex Dual Lip Air Ring, Automatic Gauge Control, Bubble Cage, Poly Cools & Blowers, Tower, 80 Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters, Dual Side, Generator, Computerized Line Control, RheinholdÊ ASKII Robotic Controlled Face-to-Face Center Surface Winders, Auto Cut Forward & Reverse, 40 Diameter, Doffing Table, Shaft Extractors, (2) Trim Blowers, (7) Plast Control Gravimetric Blenders, Foremost ASR, Auto Loss in Weight Control, Custom Built 80 Machine Direction Orienter (MDO),Ê Siemens Control, (4) Web Paths, Budzar & Advantage Temperature Controls (Original Equipment Cost: 2002 Alpine Extrusion Line $2,900,000.00; 2002 Custom Built MDO $750,000.00)

1998 ALPINE 80 5 LAYER BLOWN FILM EXTRUSION LINE Black Clawson 80 MDO will be

65mm, 30:1, Air Cooled Extruders, 100 HP Reliance DC Drives, (2) 50mm, 30:1,

Changers, Alpine 400mm 5-Layer IBC Die, Bubble Cage, Addex Dual Lip Air Ring,

Secondary Nip, (2) Pillar Treaters, Dual Side, (2) Enercon Generators, E&L Edge

Winders, Siemens Control, Trim Blowers, (5) Foremost Gravimetric Blenders, Auto

4 Web Paths, Control, Advantage Temperature Controls (Original Equipment Cost:

5 1998 ALPINE 80 5 LAYER BLOWN FILM EXTRUSION LINE Black Clawson 80 MDO will be offered separately 1998Ê ALPINE 5-Layer, 80 Blown Film Extrusion Line, (3) 65mm, 30:1, Air Cooled Extruders, 100 HP Reliance DC Drives, (2) 50mm, 30:1, Air Cooled Extruders, 60 HP Reliance DC Drives, All w/hydraulic Screen Changers, Alpine 400mm 5-Layer IBC Die, Bubble Cage, Addex Dual Lip Air Ring, Automatic Gauge Control, Poly Cools, Blowers, 80 Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters, Dual Side, (2) Enercon Generators, E&L Edge Guide, Computerized Line Control, 2007 Alpine 64 Back-to-Back Center Surface Winders, Siemens Control, Trim Blowers, (5) Foremost Gravimetric Blenders, Auto Weight in Loss Control, 1998 Black Clawson 80 Machine Direction Orienter (MDO), 4 Web Paths, Control, Advantage Temperature Controls (Original Equipment Cost: 1998 Alpine Extrusion Line $2,100,000.00; 2007 Alpine Winder $450,000.00; 1998 BlackÊ Clawson MDO $675,000.00)

2005 RULLI STANDARD 1800MM BLOWN FILM EXTRUSION LINE 2005Ê RULLIÊ STANDARD 5-Layer, 1800mm Blown Film

5, 30:1, Air Cooled Extruders, 100 HP, AC VS Drives, (3) 50mm, 30:1, Air Cooled Extruders, 60 HP, AC

Screen Changers, 5-Layer, 350mm IBC Die, Dual Lip Air Ring, Bubble Cages, Poly Cools, Blowers, Tower,

Treater on Winder, Secondary Nip, Rulli Standard 1800mm Back-to-Back Center Surface Winders, Auto

5 HP Vacuum Pump, Auto Weight in Loss Control (Original Equipment Cost: 2005 RulliÊ Standard

6 2005 RULLI STANDARD 1800MM BLOWN FILM EXTRUSION LINE 2005Ê RULLIÊ STANDARD 5-Layer, 1800mm Blown Film Extrusion Line, (2) 2.5, 30:1, Air Cooled Extruders, 100 HP, AC VS Drives, (3) 50mm, 30:1, Air Cooled Extruders, 60 HP, AC VS Drives, All w/pneu. Screen Changers, 5-Layer, 350mm IBC Die, Dual Lip Air Ring, Bubble Cages, Poly Cools, Blowers, Tower, 1800mm Oscillating Haul Off, E&L Edge Guide, Dual Sided Treater w/generator, Enercon Bare Roll Treater on Winder, Secondary Nip, Rulli Standard 1800mm Back-to-Back Center Surface Winders, Auto Cut, Trim Blowers, 36-Zone Control Panel, (5) CRG Gravimetric Blenders & Loaders, CRG 7.5 HP Vacuum Pump, Auto Weight in Loss Control (Original Equipment Cost: 2005 RulliÊ Standard Extrusion Line $1,300,000.00) PUBLIC AUCTION SALE FLEXTECH PACKAGING, LTD INDUSTRIAL BLVD. CINCINNATI, OHIO Wed.Ê OctÊ 19th,Ê StartingÊ atê 10:30Ê am Inspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orê byê appt To arrange inspection contact auctioneers office Register to bid:

TIMED ONLINE AUCTION

TIMED ONLINE AUCTION DALTON KING PACKAGING INC. Plant Closed MAJOR PLASTIC BLOWN FILM FACILITY FEATURING (12) Blown Film Lines (10) Bag Machines Recyclers Macchi 94.5 3-Layer Blown Film Line Bids Start